In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzVx4UdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+U1Af/b3cV5d5a1LWRdLgR
71JCPK/M3o43r2U9wCSikteXkmNBEdEoc5+WRk2SuZFLW/JB1DHDY7/gISPIhfoB
ZIza2TxD/QK1CQ5/mMWruKBlyygbYYZgsYaaNsMJRJgicgOSjTN0nuHMbIfv3tAN
mu+IlkD0LdhVjP0fz30Jpew3b3575RCjYxEPM6KQI3RxtQFjZ3FhqV5hKR4vtdP5
yLWJQzwAbaCB3SZUvvp7TN1ZsmeyLpc+Yz/YtRTqQedo7SNWWBKldLhqq4bZnH1I
AkzHbtWIOBrjWJ34ZMAgI5Q56Du9TBbBvCdM9azmrQjSu/2kdsPBPcUyOpnUCsCx
NyXo9g==
=x71l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into staging
Add CPUClass::tlb_fill.
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
# gpg: Signature made Fri 10 May 2019 19:48:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190510: (27 commits)
tcg: Use tlb_fill probe from tlb_vaddr_to_host
tcg: Remove CPUClass::handle_mmu_fault
tcg: Use CPUClass::tlb_fill in cputlb.c
target/xtensa: Convert to CPUClass::tlb_fill
target/unicore32: Convert to CPUClass::tlb_fill
target/tricore: Convert to CPUClass::tlb_fill
target/tilegx: Convert to CPUClass::tlb_fill
target/sparc: Convert to CPUClass::tlb_fill
target/sh4: Convert to CPUClass::tlb_fill
target/s390x: Convert to CPUClass::tlb_fill
target/riscv: Convert to CPUClass::tlb_fill
target/ppc: Convert to CPUClass::tlb_fill
target/openrisc: Convert to CPUClass::tlb_fill
target/nios2: Convert to CPUClass::tlb_fill
target/moxie: Convert to CPUClass::tlb_fill
target/mips: Convert to CPUClass::tlb_fill
target/mips: Tidy control flow in mips_cpu_handle_mmu_fault
target/mips: Pass a valid error to raise_mmu_exception for user-only
target/microblaze: Convert to CPUClass::tlb_fill
target/m68k: Convert to CPUClass::tlb_fill
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.
Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Block prefetch option adds a bunch of non-privileged opcodes that may be
implemented as nops since QEMU doesn't model caches.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-9-armbru@redhat.com>
scripts/clean-header-guards.pl warns these headers use reserved
identifier _XTENSA_CORE_CONFIGURATION_H as header guard symbol. It
additionally warns the guard doesn't match the file name.
Reuse of the same guard symbol in multiple headers is okay as long as
they cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use the guard
symbol scripts/clean-header-guards.pl picks, less the TARGET_ prefix.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-5-armbru@redhat.com>
The Memory Protection Unit Option (MPU) is a combined instruction and
data memory protection unit with more protection flexibility than the
Region Protection Option or the Region Translation Option but without
any translation capability. It does no demand paging and does not
reference a memory-based page table.
Add memory protection unit option, internal state, SRs and opcodes.
Implement MPU entries dumping in dump_mmu.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add SRs and rsr/wsr/xsr opcodes defined by the parity/ECC xtensa option.
The implementation is trivial since we don't emulate parity/ECC yet.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
IDMA and scatter/gather features introduced new IRQ types that
overlay_tool.h need to initialize Xtensa configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Remove declarations of the internal mmu_helper functions from the cpu.h,
make these functions static and shuffle them.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
SR numbers are not unique: different Xtensa options may reuse SR number
for different purposes. Introduce generic rsr/wsr functions and xsr
template and use them instead of centralized SR access functions. Change
prototypes of specific rsr/wsr functions to match XtensaOpcodeOp and use
them instead of centralized SR access functions. Put xtensa option that
introduces SR into the second opcode description parameter and use it to
test for rsr/wsr/xsr opcode validity. Extract SR and UR names for the
xtensa_cpu_dump_state from libisa. Merge SRs and URs in the dump.
Register names of used SR/UR in init_libisa and use these names for TCG
globals referencing these SR/UR.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We can now use the CPUClass hook instead of a named function.
Create a static tlb_fill function to avoid other changes within
cputlb.c. This also isolates the asserts within. Remove the
named tlb_fill function from all of the targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The various dump_mmu() take an fprintf()-like callback and a FILE * to
pass to it, and so do their helper functions. Passing around callback
and argument is rather tiresome.
Most dump_mmu() are called only by the target's hmp_info_tlb(). These
all pass monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
SPARC's dump_mmu() gets also called from target/sparc/ldst_helper.c a
few times #ifdef DEBUG_MMU. These calls pass fprintf() and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-11-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Don't announce that exit simcall has been invoked: this is just noise.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
break_dependency incorrectly handles the case of dependency on an opcode
that references the same register multiple times. E.g. the following
instruction is translated incorrectly:
{ or a2, a3, a3 ; or a3, a2, a2 }
This happens because resource indices of both dependency graph nodes are
incremented, and a copy for the second instance of the same register in
the ending node is not done.
Only increment resource index of the ending node of the dependency.
Add test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Load/store opcodes may raise MMU exceptions. Normally exceptions should
be checked in priority order before any actual operations, but since MMU
exceptions are tightly coupled with actual memory access, there's
currently no way to do it.
Approximate this behavior by executing all load, then all store, and
then all other opcodes in the FLIX bundles. Use opcode dependency
mechanism to express ordering. Mark load/store opcodes with
XTENSA_OP_{LOAD,STORE} flags. Newer libisa has classifier functions that
can tell whether opcode is a load or store, but this information is not
available in the existing overlays.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Currently topologic opcode sorting stops at the first detected
dependency loop. Introduce struct opcode_arg_copy that describes
temporary register copy. Scan remaining opcodes searching for
dependencies that can be broken, break them by introducing temporary
register copies and record them in an array. In case of success
create local temporaries and initialize them with current register
values. Share single temporary copy between all register users. Delete
temporaries after translation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
libisa represents boolean registers b0..b16 as a BR register file and as
BR4 and BR8 register groups. Add these register files and use
OpcodeArg::{in,out} parameters to access boolean registers in
translators.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
libisa represents MAC16 registers m0..m3 as an MR register file. Add
this register file and reference its registers directly from the
translate_mac16. Drop translator parameter that indicates whether opcode
argument is in ar or in mr.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
To support circular register dependencies in FLIX bundles opcode inputs
and outputs must be separate and adjustable. Circular dependencies can
be broken by making temporary copies of opcode inputs and substituting
them into the arguments array instead of the original registers.
E.g. the circular register dependency in the following bundle:
{ mov a2, a3 ; mov a3, a2 }
can be resolved by making copy a2' = a2 and substituting it as input
argument of the second opcode:
{ mov a2, a3 ; mov a3, a2' }
Change opcode translator prototype to accept OpcodeArg array as
argument. For each register argument initialize OpcodeArg::{in,out} with
TCGv_* of the respective register. Don't explicitly use cpu_R in the
opcode translators, use OpcodeArg::{in,out} instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move return address calculation and WINDOW_START adjustment out of the
retw helper to simplify logic a bit and avoid using registers directly.
Pass a0 as a parameter to the helper.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Opcodes that modify WINDOW_BASE SR don't have dependency on opcodes that
use windowed registers. If such opcodes are combined in a single
instruction they may not be correctly ordered. Instead of adding said
dependency use temporary register to store changed WINDOW_BASE value and
do actual register window rotation as a postprocessing step.
Not all opcodes that change WINDOW_BASE need this: retw, rfwo and rfwu
are also jump opcodes, so they are guaranteed to be translated last and
thus will not affect other opcodes in the same instruction.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Some opcodes may need additional actions at every exit from the
translated instruction or may need to amend TB exit slots available to
jumps generated for the instruction. Add gen_postprocess function and
call it from the gen_jump_slot and from the disas_xtensa_insn.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Opcodes in different slots may read and write same resources (registers,
states). In the absence of resource dependency loops it must be possible
to sort opcodes to avoid interference.
Record resources used by each opcode in the bundle. Build opcode
dependency graph and use topological sort to order its nodes. In case of
success translate opcodes in sort order. In case of failure report and
raise invalid opcode exception.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
FLIX adds branch and loop instruction variants with 15- and 18-bit wide
target offset. Implement them as additional names for the ordinary
branch/loop opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There are opcodes that differ only in encoding or possible range of
immediate arguments. Allow multiple names for single opcode translation
table entry to reduce code duplication in that case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Requirement for alphabetical opcode sorting in opcode tables is awkward
and does not allow sharing implementation between multiple opcodes.
Use hash tables to find opcodes by name. Move implementation from the
translate.c to the helper.c to its only user and remove declaration from
the cpu.h
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't run xtensa_finalize_config at the time of core registration,
instead run it at the CPU class initialization.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa-modules part of the test_mmuhifi_c3 core is missing fixes that
returns XTENSA_UNDEFINED for undefined opcodes and marks all data
structures static. Run sed script from target/xtensa/import_core.sh on
it. This fixes test_sr tests for missing special registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Merge gen_callwi and gen_callw into their only users, translate_callw
and translate_callxw. Extract jump slot adjustment logic into a separate
function and use it in gen_jumpi and translate_callw.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use libisa to extract whether opcode uses windowed registers and
construct mask based on that. This only leaves special case for the
'entry' opcode, as it needs to probe a register dynamically.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa-modules.c produced by recent Tensilica tools have
Opcode_*_encode_fns arrays defined as static. Don't add extra 'static'
in front of them when importing.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Runstall signal looks very much like a level-triggered IRQ line. Provide
xtensa_get_runstall function that returns runstall IRQ.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Replace xtensa_get_extint that returns single external IRQ descriptor
with xtensa_get_extints that returns a vector of all external IRQs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
It's a one-liner used in a single place, move its implementation there
and remove its declaration.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
INTERRUPT special register may be changed both by the core (by writing
to INTSET and INTCLEAR registers) and by external events (by triggering
and clearing HW IRQs). In MTTCG this state must be protected from
concurrent access, otherwise interrupts may be lost or spurious
interrupts may be detected.
Use atomic operations to change INTSET SR.
Fix wsr.intset so that it soesn't clear any bits.
Fix wsr.intclear so that it doesn't clear bit that corresponds to NMI.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When xtensa_runstall is called to unstall a core it needs to kick it
after clearing runstall flag, otherwise the core doesn't start
immediately. There's also no point in clearing CPU_INTERRUPT_HALT, drop
it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move helper functions related to interrupt and exception handling from
op_helper.c and helper.c to exc_helper.c. No functional changes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
