Currently the wait_for_migration_fail and wait_for_migration_complete
functions will spin in an infinite loop checking query-migrate status
to detect a specific change/goal. This is fine when everything goes
to plan, but when the unusual happens, these will hang the test suite
forever.
Any normally executing migration test case normally takes < 1 second
for a state change, with exception of the autoconverge test which
takes about 5 seconds. Taking into account possibility of people
running tests inside TCG, allowing a factor of x20 slowdown gives
a reasonable worst case of 120 seconds. Anything taking longer than
this is a strong sign that the test has hung, or the test should be
rewritten to be faster.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extend previously added test case by checking that fid was unaffected
by 'Twalk' request (i.e. when 2nd path component of request being
invalid). Do that by subsequently sending a 'Tgetattr' request with
the fid previously used for 'Twalk'; that 'Tgetattr' request should
return an 'Rlerror' response by 9p server with error code ENOENT as
that fid is basically invalid.
And as we are at it, also check that the QID returned by 'Twalk' is
not identical to the root node's QID.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <6f0813cafdbf683cdac8b1492dd4ef8699c5b1d9.1647339025.git.qemu_oss@crudebyte.com>
Previous 9p patch fixed 'Twalk' request handling, which was previously not
behaving as specified by the 9p2000 protocol spec. This patch adds a new test
case which guards the new 'Twalk' behaviour in question.
More specifically: it sends a 'Twalk' request where the 1st path component
is valid, whereas the 2nd path component transmitted to server does not
exist. The expected behaviour is that 9p server would respond by sending
a 'Rwalk' response with exactly 1 QID (instead of 'Rlerror' response).
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <61bde2f44b87e24b70ec098dfb81765665b2dfcb.1647339025.git.qemu_oss@crudebyte.com>
Extend previously added fs_walk_none() test by comparing the QID
of the root fid with the QID of the cloned fid. They should be
equal.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5bbe9c6931b4600a9a23742f5ff2d38c1188237d.1647339025.git.qemu_oss@crudebyte.com>
Send Twalk request with nwname=0. In this case no QIDs should
be returned by 9p server; this is equivalent to walking to dot.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <b5ead2775000203607801f09bcefc04c493d8bfa.1647339025.git.qemu_oss@crudebyte.com>
Expect ENOENT Rlerror response when trying to walk to a
non-existent directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Based-on: <E1nTpyU-0000yR-9o@lizzy.crudebyte.com>
Message-Id: <1f5aa50ace3ba3861ea31e8888367518282065a6.1647339025.git.qemu_oss@crudebyte.com>
Determine the BARs used by the PCI device and register handlers to
manage the access to the same.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 3373e10b5be5f42846f0632d4382466e1698c505.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
=LXG0
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Creating 1GB image for a simple qtest is unnecessary
and could lead to failures. We reduce the image size
to 1MB to reduce the test overhead.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20220609214125.4192212-1-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220525173232.31429-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The CEDT table includes addreses of host bridge registers.
There are allocated in a different order due to the previous
patch, so update to the table is needed.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed to allow memory address changes as a result of next patch.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <20220608145440.26106-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used. Similar to existing
SgxEpcProperties.
Update qemu-options.hx to reflect that this is now a -machine
parameter. The bulk of -M / -machine parameters are documented
under machine, so use that in preference to M.
Update cxl-test and bios-tables-test to reflect new parameters.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220608135340.3304695-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-27-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-24-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-23-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220609114855.3477822-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
basic q35 DSDT with an extra device node:
Device (MI1)
{
Name (_HID, EisaId ("IPI0001")) // _HID: Hardware ID
Name (_STR, "ipmi_smbus") // _STR: Description String
Name (_UID, One) // _UID: Unique ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
I2cSerialBusV2 (0x0000, ControllerInitiated, 0x000186A0,
AddressingMode7Bit, "\\_SB.PCI0.SMB0",
0x00, ResourceProducer, , Exclusive,
)
})
Name (_IFT, 0x04) // _IFT: IPMI Interface Type
Name (_SRV, 0x0200) // _SRV: IPMI Spec Revision
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. which will be used by follow up smbus-ipmi test-case
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220524154056.2896913-12-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_strdup_printf() allocated memory for path, we should free it with
g_free() when no longer needed.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-Id: <20220531080921.4704-1-linmq006@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The function is required by get_relocated_path() (already in cutils),
and used by qemu-ga and may be generally useful.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-2-marcandre.lureau@redhat.com>
The write_enable latch property is not currently exposed.
This commit makes it a modifiable property.
Signed-off-by: Iris Chen <irischenlj@fb.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20220513055022.951759-1-irischenlj@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Although we register a ABRT handler to kill off QEMU when g_assert()
triggers, we want an extra safety net. The QEMU process might be
non-functional and thus not have responded to SIGTERM. The test script
might also have crashed with SEGV, in which case the cleanup handlers
won't ever run.
Using the Linux specific prctl(PR_SET_PDEATHSIG) syscall, we
can ensure that QEMU gets sent SIGKILL as soon as the controlling
qtest exits, if nothing else has correctly told it to quit.
Note, technically the death signal is sent when the *thread* that
called fork() exits. IOW, if you are calling qtest_init() in one
thread, letting that thread exit, and then expecting to run
qtest_quit() in a different thread, things are not going to work
out. Fortunately that is not a scenario that exists in qtests,
as pairs of qtest_init and qtest_quit are always called from the
same thread.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513154906.206715-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_init registers a hook to cleanup the running QEMU process
should g_assert() fire before qtest_quit is called. When the first
hook is registered, it is supposed to triggere registration of the
SIGABRT handler. Unfortunately the logic in hook_list_is_empty is
inverted, so the SIGABRT handler never gets registered, unless
2 or more QEMU processes are run concurrently. This caused qtest
to leak QEMU processes anytime g_assert triggers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220513154906.206715-2-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
=xdSk
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
most of CXL support
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi
# MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv
# SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77
# 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR
# PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1
# f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA=
# =xdSk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits)
vhost-user-scsi: avoid unlink(NULL) with fd passing
virtio-net: don't handle mq request in userspace handler for vhost-vdpa
vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request()
vhost-vdpa: backend feature should set only once
vhost-net: fix improper cleanup in vhost_net_start
vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa
virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa
virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated
hw/i386/amd_iommu: Fix IOMMU event log encoding errors
hw/i386: Make pic a property of common x86 base machine type
hw/i386: Make pit a property of common x86 base machine type
include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX
include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK
docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG
vhost-user: more master/slave things
virtio: add vhost support for virtio devices
virtio: drop name parameter for virtio_init()
virtio/vhost-user: dynamically assign VhostUserHostNotifiers
hw/virtio/vhost-user: don't suppress F_CONFIG when supported
include/hw: start documenting the vhost API
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Various methods in the migration test call 'query_migrate' to fetch the
current status and then access a particular field. Almost all of these
cases expect the migration to be in a non-failed state. In the case of
'wait_for_migration_pass' in particular, if the status is 'failed' then
it will get into an infinite loop. By validating that the status is
not 'failed' the test suite will assert rather than hang when getting
into an unexpected state.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This validates that we correctly handle multifd migration success
and failure scenarios when using TLS with x509 certificates. There
are quite a few different scenarios that matter in relation to
hostname validation, but we skip a couple as we can assume that
the non-multifd coverage applies to some extent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-9-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This validates that we correctly handle multifd migration success
and failure scenarios when using TLS with pre shared keys.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-8-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most of the multifd migration test logic is common with the rest of the
precopy tests, so it can use the helper without difficulty. The only
exception of the multifd cancellation test which tries to run multiple
migrations in a row.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Most of the XBZRLE migration test logic is common with the rest of the
precopy tests, so it can use the helper with just one small tweak.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This validates that we correctly handle migration success and failure
scenarios when using TLS with x509 certificates. There are quite a few
different scenarios that matter in relation to hostname validation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-5-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Manual merge due to ifdef change in 3
This validates that we correctly handle migration success and failure
scenarios when using TLS with pre shared keys.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add CXL Fixed Memory Windows to the CXL tests.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-40-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tables that differ from normal Q35 tables when running the CXL test.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-39-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The DSDT includes several CXL specific elements and the CEDT
table is only present if we enable CXL.
The test exercises all current functionality with several
CFMWS, CHBS structures in CEDT and ACPI0016/ACPI00017 and _OSC
entries in DSDT.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-38-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add exceptions for the DSDT and the new CEDT tables
specific to a new CXL test in the following patch.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-37-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At this stage we can boot configurations with host bridges,
root ports and type 3 memory devices, so add appropriate
tests.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-23-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Initial test with just pxb-cxl. Other tests will be added
alongside functionality.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-16-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/339
Without the previous commit, when running 'make check-qtest-i386'
with QEMU configured with '--enable-sanitizers' we get:
==4028352==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x619000062a00 at pc 0x5626d03c491a bp 0x7ffdb4199410 sp 0x7ffdb4198bc0
READ of size 786432 at 0x619000062a00 thread T0
#0 0x5626d03c4919 in __asan_memcpy (qemu-system-i386+0x1e65919)
#1 0x5626d1c023cc in flatview_write_continue softmmu/physmem.c:2787:13
#2 0x5626d1bf0c0f in flatview_write softmmu/physmem.c:2822:14
#3 0x5626d1bf0798 in address_space_write softmmu/physmem.c:2914:18
#4 0x5626d1bf0f37 in address_space_rw softmmu/physmem.c:2924:16
#5 0x5626d1bf14c8 in cpu_physical_memory_rw softmmu/physmem.c:2933:5
#6 0x5626d0bd5649 in cpu_physical_memory_write include/exec/cpu-common.h:82:5
#7 0x5626d0bd0a07 in i8257_dma_write_memory hw/dma/i8257.c:452:9
#8 0x5626d09f825d in fdctrl_transfer_handler hw/block/fdc.c:1616:13
#9 0x5626d0a048b4 in fdctrl_start_transfer hw/block/fdc.c:1539:13
#10 0x5626d09f4c3e in fdctrl_write_data hw/block/fdc.c:2266:13
#11 0x5626d09f22f7 in fdctrl_write hw/block/fdc.c:829:9
#12 0x5626d1c20bc5 in portio_write softmmu/ioport.c:207:17
0x619000062a00 is located 0 bytes to the right of 512-byte region [0x619000062800,0x619000062a00)
allocated by thread T0 here:
#0 0x5626d03c66ec in posix_memalign (qemu-system-i386+0x1e676ec)
#1 0x5626d2b988d4 in qemu_try_memalign util/oslib-posix.c:210:11
#2 0x5626d2b98b0c in qemu_memalign util/oslib-posix.c:226:27
#3 0x5626d09fbaf0 in fdctrl_realize_common hw/block/fdc.c:2341:20
#4 0x5626d0a150ed in isabus_fdc_realize hw/block/fdc-isa.c:113:5
#5 0x5626d2367935 in device_set_realized hw/core/qdev.c:531:13
SUMMARY: AddressSanitizer: heap-buffer-overflow (qemu-system-i386+0x1e65919) in __asan_memcpy
Shadow bytes around the buggy address:
0x0c32800044f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280004510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280004520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3280004530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c3280004540:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004550: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3280004590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Heap left redzone: fa
Freed heap region: fd
==4028352==ABORTING
[ kwolf: Added snapshot=on to prevent write file lock failure ]
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Up to now the virt-machine node contains a virtio-mmio node.
However no driver produces any PCI interface node. Hence, PCI
tests cannot be run with aarch64 binary.
Add a GPEX driver node that produces a pci interface node. This latter
then can be consumed by all the pci tests. One of the first motivation
was to be able to run the virtio-iommu-pci tests.
We still face an issue with pci hotplug tests as hotplug cannot happen
on the pcie root bus and require a generic root port. This will be
addressed later on.
We force cpu=max along with aarch64/virt machine as some PCI tests
require high MMIO regions to be available.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20220504152025.1785704-4-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM does not not support hotplug on pcie.0. Add a flag on the bus
which tells if devices can be hotplugged and skip hotplug tests
if the bus cannot be hotplugged. This is a temporary solution to
enable the other pci tests on aarch64.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220504152025.1785704-3-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment the IO space limit is hardcoded to
QPCI_PIO_LIMIT = 0x10000. When accesses are performed to a bar,
the base address of this latter is compared against the limit
to decide whether we perform an IO or a memory access.
On ARM, we cannot keep this PIO limit as the arm-virt machine
uses [0x3eff0000, 0x3f000000 ] for the IO space map and we
are mandated to allocate at 0x0.
Add a new flag in QPCIBar indicating whether it is an IO bar
or a memory bar. This flag is set on QPCIBar allocation and
provisionned based on the BAR configuration. Then the new flag
is used in access functions and in iomap() function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220504152025.1785704-2-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
In aarch64_numa_cpu(), the CPU and NUMA association is something
like below. Two threads in the same core/cluster/socket are
associated with two individual NUMA nodes, which is unreal as
Igor Mammedov mentioned. We don't expect the association to break
NUMA-to-socket boundary, which matches with the real world.
NUMA-node socket cluster core thread
------------------------------------------
0 0 0 0 0
1 0 0 0 1
This corrects the topology for CPUs and their association with
NUMA nodes. After this patch is applied, the CPU and NUMA
association becomes something like below, which looks real.
Besides, socket/cluster/core/thread IDs are all checked when
the NUMA node IDs are verified. It helps to check if the CPU
topology is properly populated or not.
NUMA-node socket cluster core thread
------------------------------------------
0 1 0 0 0
1 0 0 0 0
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-5-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPU topology isn't enabled on arm/virt machine yet, but we're
going to do it in next patch. After the CPU topology is enabled by
next patch, "thread-id=1" becomes invalid because the CPU core is
preferred on arm/virt machine. It means these two CPUs have 0/1
as their core IDs, but their thread IDs are all 0. It will trigger
test failure as the following message indicates:
[14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR
1.48s killed by signal 6 SIGABRT
>>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \
QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \
QTEST_QEMU_BINARY=./qemu-system-aarch64 \
QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \
/home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k
――――――――――――――――――――――――――――――――――――――――――――――
stderr:
qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found
This fixes the issue by providing comprehensive SMP configurations
in aarch64_numa_cpu(). The SMP configurations aren't used before
the CPU topology is enabled in next patch.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The call is POSIX-specific. Use the dedicated GLib API.
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will help moving QAPI/QMP in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Since commit a2ce7dbd91 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
I was setting gpioV4-7 to "1110" using the QOM pin property handler and
noticed that lowering gpioV7 was inadvertently lowering gpioV4-6 too.
(qemu) qom-set /machine/soc/gpio gpioV4 true
(qemu) qom-set /machine/soc/gpio gpioV5 true
(qemu) qom-set /machine/soc/gpio gpioV6 true
(qemu) qom-get /machine/soc/gpio gpioV4
true
(qemu) qom-set /machine/soc/gpio gpioV7 false
(qemu) qom-get /machine/soc/gpio gpioV4
false
An expression in aspeed_gpio_set_pin_level was using a logical NOT
operator instead of a bitwise NOT operator:
value &= !pin_mask;
The original author probably intended to make a bitwise NOT expression
"~", but mistakenly used a logical NOT operator "!" instead. Some
programming languages like Rust use "!" for both purposes.
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and
AST2500")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220502080827.244815-1-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This add two addition test cases for accumulative mode under sg enabled.
The input vector was manually craft with "abc" + bit 1 + padding zeros + L.
The padding length depends on algorithm, i.e. SHA512 (1024 bit),
SHA256 (512 bit).
The result was calculated by command line sha512sum/sha256sum utilities
without padding, i.e. only "abc" ascii text.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[ clg: checkpatch fixes ]
Message-Id: <20220426021120.28255-4-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The migration precopy testing helper function always expects the
migration to run to a completion state. There will be test scenarios
for TLS where expect either the client or server to fail the migration.
This expands the helper to cope with these scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-12-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The combination of the start and finish hooks allow the FD passing
code to use the precopy helper
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-11-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are alot of different scenarios to test with migration due to the
wide number of parameters and capabilities available. To enable sharing
of the basic precopy test scenario, we need to be able to set arbitrary
parameters and capabilities before the migration is initiated, but don't
want to have all this logic in the common helper function. Solve this
by defining two hooks that can be provided by the test case, one before
migration starts and one after migration finishes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-10-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The test cases differ only in the URI they provide to the migration
commands, and the ability to set the dirty_ring mode. This code is
trivially merged into a common helper.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-9-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's no compelling reason why the MigrateStart struct needs to be
heap allocated. Using stack allocation and static initializers is
simpler.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-8-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The QMP commands have a trailing newline, but the response does not.
This makes the qtest logs hard to follow as the next QMP command
appears in the same line as the previous QMP response.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When debugging failing qtests it is useful to be able to turn on trace
output to stderr. The QTEST_TRACE env variable contents get injected
as a '-trace <str>' command line arg
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
../tests/qtest/fuzz/generic_fuzz.c:746:17: warning: variable 'name' set but not used [-Wunused-but-set-variable]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220420132624.2439741-42-marcandre.lureau@redhat.com>
Eric noticed while attempting to enable the vhost-user-blk-test for
Aarch64 that that things didn't work unless he put in a dummy
guest_malloc() at the start of the test. Without it
qvirtio_wait_used_elem() would assert when it reads a junk value for
idx resulting in:
qvirtqueue_get_buf: idx:2401 last_idx:0
qvirtqueue_get_buf: 0x7ffcb6d3fe74, (nil)
qvirtio_wait_used_elem: 3000000/0
ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
Bail out! ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
What was actually happening is the guest_malloc() effectively pushed
the allocation of the vring into the next page which just happened to
have clear memory. After much tedious tracing of the code I could see
that qvring_init() does attempt initialise a bunch of the vring
structures but skips the vring->used.idx value. It is probably not
wise to assume guest memory is zeroed anyway. Once the ring is
properly initialised the hack is no longer needed to get things
working.
Thanks-to: John Snow <jsnow@redhat.com> for helping debug
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220406173356.1891500-1-alex.bennee@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The fuzz tests are currently scheduled for all targets, but their setup
code limits the run to "i386", so that these tests always show "SKIP"
on other targets. Move it to the right x86 list in meson.build, then
we can drop the architecture check during runtime, too.
Message-Id: <20220414130127.719528-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allow the same set of tests for all MIPS targets, so that "mipsel"
now gets some additional test coverage, too. While we're at it,
simplify the definitions for qtests_mips64 and qtests_mips64el.
Message-Id: <20220414114655.604391-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the migration is over before we cancel it, we are
waiting in a loop a state that never comes because the state
is already "completed".
To avoid an infinite loop, skip the test if the migration
is "completed" before we were able to cancel it.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220329124259.355995-1-lvivier@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The socket API wrappers were initially introduced in commit
00aa0040 ("Wrap recv to avoid warnings"), but made redundant with
commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes
the win32 declarations and thus removed the earlier warnings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Initial patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
This uncovers a typing error:
../hw/9pfs/9p.c: In function ‘qid_path_fullmap’:
../hw/9pfs/9p.c:855:13: error: assignment to ‘QpfEntry *’ from incompatible pointer type ‘QppEntry *’ [-Werror=incompatible-pointer-types]
855 | val = g_new0(QppEntry, 1);
| ^
Harmless, because QppEntry is larger than QpfEntry. Manually fixed to
allocate a QpfEntry instead.
Cc: Greg Kurz <groug@kaod.org>
Cc: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220315144156.1595462-3-armbru@redhat.com>
Include the qtest reproducer provided by Alexander Bulekov
in https://gitlab.com/qemu-project/qemu/-/issues/451. Without
the previous commit, we get:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
==447470==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61500002a080 at pc 0x564c71766d48 bp 0x7ffc126c62b0 sp 0x7ffc126c62a8
READ of size 1 at 0x61500002a080 thread T0
#0 0x564c71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18
#1 0x564c7175f139 in sdhci_read hw/sd/sdhci.c:1022:19
#2 0x564c721b937b in memory_region_read_accessor softmmu/memory.c:440:11
#3 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#4 0x564c7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16
#5 0x564c7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9
#6 0x564c7212db5d in flatview_read_continue softmmu/physmem.c:2879:23
#7 0x564c7212f958 in flatview_read softmmu/physmem.c:2921:12
#8 0x564c7212f418 in address_space_read_full softmmu/physmem.c:2934:18
#9 0x564c721305a9 in address_space_rw softmmu/physmem.c:2962:16
#10 0x564c7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#11 0x564c7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12
#12 0x564c71759684 in dma_memory_read include/sysemu/dma.h:152:12
#13 0x564c7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27
#14 0x564c7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13
#15 0x564c7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9
#16 0x564c717629ee in sdhci_write hw/sd/sdhci.c:1212:9
#17 0x564c72172513 in memory_region_write_accessor softmmu/memory.c:492:5
#18 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#19 0x564c72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16
#20 0x564c721419ee in flatview_write_continue softmmu/physmem.c:2812:23
#21 0x564c721301eb in flatview_write softmmu/physmem.c:2854:12
#22 0x564c7212fca8 in address_space_write softmmu/physmem.c:2950:18
#23 0x564c721d9a53 in qtest_process_command softmmu/qtest.c:727:9
0x61500002a080 is located 0 bytes to the right of 512-byte region [0x615000029e80,0x61500002a080)
allocated by thread T0 here:
#0 0x564c708e1737 in __interceptor_calloc (qemu-system-i386+0x1e6a737)
#1 0x7ff05567b5e0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x5a5e0)
#2 0x564c71774adb in sdhci_pci_realize hw/sd/sdhci-pci.c:36:5
SUMMARY: AddressSanitizer: heap-buffer-overflow hw/sd/sdhci.c:474:18 in sdhci_read_dataport
Shadow bytes around the buggy address:
0x0c2a7fffd3c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2a7fffd3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c2a7fffd410:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2a7fffd420: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd430: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd440: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd450: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd460: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Heap left redzone: fa
Freed heap region: fd
==447470==ABORTING
Broken pipe
ERROR qtest-i386/fuzz-sdcard-test - too few tests run (expected 3, got 2)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211215205656.488940-4-philmd@redhat.com>
[thuth: Replaced "-m 4G" with "-m 512M"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include the qtest reproducer provided by Alexander Bulekov
in https://gitlab.com/qemu-project/qemu/-/issues/542.
Without the previous commit, we get:
$ make check-qtest-i386
...
Running test tests/qtest/intel-hda-test
AddressSanitizer:DEADLYSIGNAL
=================================================================
==1580408==ERROR: AddressSanitizer: stack-overflow on address 0x7ffc3d566fe0
#0 0x63d297cf in address_space_translate_internal softmmu/physmem.c:356
#1 0x63d27260 in flatview_do_translate softmmu/physmem.c:499:15
#2 0x63d27af5 in flatview_translate softmmu/physmem.c:565:15
#3 0x63d4ce84 in flatview_write softmmu/physmem.c:2850:10
#4 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#5 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#6 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#7 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#8 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
#9 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1
#10 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1
#11 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12
#12 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5
#13 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5
#14 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5
#15 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9
#16 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5
#17 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9
#18 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5
#19 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5
#20 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18
#21 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16
#22 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23
#23 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12
#24 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#25 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#26 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#27 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#28 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
#29 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1
#30 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1
#31 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12
#32 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5
#33 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5
#34 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5
#35 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9
#36 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5
#37 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9
#38 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5
#39 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5
#40 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18
#41 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16
#42 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23
#43 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12
#44 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#45 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#46 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#47 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#48 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
...
SUMMARY: AddressSanitizer: stack-overflow softmmu/physmem.c:356 in address_space_translate_internal
==1580408==ABORTING
Broken pipe
Aborted (core dumped)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211218160912.1591633-4-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'boot-serial-test' does not work with a QEMU built with --disable-tcg in
a IBM POWER9 host. The reason is that without TCG QEMU will default to
KVM acceleration, but then the KVM module in IBM POWER hosts aren't able
to handle other CPUs.
The result is that the test will break with a KVM error when trying to
ruin the ppce500 test:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/boot-serial-test
/ppc64/boot-serial/ppce500: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
error: kvm run failed Invalid argument
NIP 0000000000f00000 LR 0000000000000000 CTR 0000000000000000 XER 0000000000000000 CPU#0
MSR 0000000000000000 HID0 0000000000000000 HF 24020002 iidx 1 didx 1
TB 00000000 00000000 DECR 0
(...)
** (./tests/qtest/boot-serial-test:1935760): ERROR **: 07:44:03.010: Failed to find expected string. Please check '/tmp/qtest-boot-serial-sJ78sqg'
Fix it by checking CONFIG_TCG before compiling boot-serial-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'prom-env-test' is a TCG test that will fail if QEMU is compiled with
--disable-tcg:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/prom-env-test
/ppc64/prom-env/mac99: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
(... hangs indefinitely ...)
Fix it by checking CONFIG_TCG before compiling prom-env-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
+zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
=3NVe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (47 commits)
hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
tests/acpi: i386: update FACP table differences
hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
tests/acpi: i386: allow FACP acpi table changes
docs: vhost-user: add subsection for non-Linux platforms
configure, meson: allow enabling vhost-user on all POSIX systems
vhost: use wfd on functions setting vring call fd
event_notifier: add event_notifier_get_wfd()
pci: drop COMPAT_PROP_PCP for 2.0 machine types
hw/smbios: Add table 4 parameter, "processor-id"
x86: cleanup unused compat_apic_id_mode
vhost-vsock: detach the virqueue element in case of error
pc: add option to disable PS/2 mouse/keyboard
acpi: pcihp: pcie: set power on cap on parent slot
pci: expose TYPE_XIO3130_DOWNSTREAM name
pci: show id info when pci BDF conflict
hw/misc/pvpanic: Use standard headers instead
headers: Add pvpanic.h
pci-bridge/xio3130_downstream: Fix error handling
pci-bridge/xio3130_upstream: Fix error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# docs/specs/index.rst
The Renesas RAA229004 is a PMBus Multiphase Voltage Regulator
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20220307200605.4001451-9-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The previous test depended on the assumption that P9_DOTL_AT_REMOVEDIR
and AT_REMOVEDIR have the same value.
While this is true on Linux, it is not true everywhere, and leads to an
incorrect test failure on unlink_at, noticed when adding 9p to darwin:
Received response 7 (RLERROR) instead of 77 (RUNLINKAT)
Rlerror has errno 22 (Invalid argument)
**
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77) Bail out!
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77)
Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - Add explanation of patch and description
of pre-patch test failure]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Will Cohen: - Move this patch before 9p: darwin: meson
patch to avoid qtest breakage during
bisecting]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-11-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The FACP table is going to be changed for x86/q35 machines. To be sure
the following changes are not breaking any QEMU test this change follows
step 2 from the bios-tables-test.c guide on changes that affect ACPI
tables.
Signed-off-by: Liav Albani <liavalb@gmail.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The bypass config field should be initialized to 1 by default.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-5-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers. It can easily
be a source of use-after-free.
Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup apply since I didn't take 24/25
Test abort during active migration when failover is disabled from QEMU
or from guest side.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-8-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The primary device is not plugged and the migration is done only with
the standby device
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-7-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If failover is off, the primary device is not plugged and
the migration is done only with the standby device.
On destination, the primary device must not be plugged.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-6-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU provides the VIRTIO_NET_F_STANDBY feature but the guest doesn't
the primary device must be kept hidden
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-5-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check QEMU provides the VIRTIO_NET_F_STANDBY if failover is on,
and doesn't if failover is off
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-4-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This allows g_assert() to correctly report the line number of the error
in the test case.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The retry_isa test is not doing what it was intended for: The
test_retry_flush() function ignores the machine parameter completely
and thus this test does not get run with the "isapc" machine.
Moreover, in the course of time, the test_retry_flush() has been
changed to depend on PCI-related functions, so this also cannot
be fixed by simply using the machine parameter now. The correct
fix would be to switch the whole test to libqos, but until someone
has time to do this, let's simply drop the retry_isa test for now.
Message-Id: <20220121120635.220644-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-netdev vhost-user,vhostforce is deprecated and vhostforce=on
should be used instead.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220210145254.157790-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The way to print uint64_t is with PRIx64, not with
a cast to long long.
Message-Id: <20220206093547.1282513-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hotplug tests need a bridge setting up on q35, for now
keep them on 'pc'.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220215162537.605030-3-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For tests that rely on old hardware, e.g. floppies or IDE drives,
explicitly select the 'pc' machine type.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220215162537.605030-2-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is recommended to use g_autofree or g_autoptr as it reduces
the odds of introducing memory leaks in future changes.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-3-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
local_test_path is allocated in virtio_9p_create_local_test_dir() to hold the path
of the temporary directory. It should be freed in virtio_9p_remove_local_test_dir()
when the temporary directory is removed. Clarify the lifecycle of local_test_path
while here.
Based-on: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-2-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The 9p test cases use mkdtemp() to create a temporary directory for
running the 'local' 9p tests with real files/dirs. Unlike mktemp()
which only generates a unique file name, mkdtemp() also creates the
directory, therefore the subsequent mkdir() was wrong and caused
errors on some systems.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Fixes: 136b7af2 (tests/9pfs: fix test dir for parallel tests)
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/832
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <Greg Kurz <groug@kaod.org>
Message-Id: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mn1fA-0005qZ-TM@lizzy.crudebyte.com>
If this starts causing failures again we should probably fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204204335.1689602-3-alex.bennee@linaro.org>
This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property. Sensor can be
enabled with 'CONFIG_LSM303DLHC_MAG=y'.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change implements the test suite checks for the ERST table.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change provides a qtest that locates and then does a simple
interrogation of the ERST feature within the guest.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c, this
change adds empty placeholder files per step 1 for the new ERST
table, and excludes resulting changed files in bios-tables-test-allowed-diff.h
per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID
values used in test_oem_fields() testcase to avoid false positive and
bisection issues when QEMU is switched to \0' padding. As result
testcase ceased to test values that were shorter than max possible
length values.
Update testcase to make sure that it's testing shorter IDs like it
used to before [2].
1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test"
2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220114142641.1727679-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields whitespace padding to
padding with '\0' as it was before [1]. That will change OEM
Table ID for:
* SSDT.*: where it was padded from 6 characters to 8
* FACP.slic: where it was padded from 2 characters to 8
after reverting whitespace padding, it will be replaced with
'\0' which effectively will shorten OEM table ID to 6 and 2
characters.
Whitelist affected tables before introducing the change.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields padding with whitespace to
padding with '\0' as it was before [1]. As result test_oem_fields() will
fail due to unexpectedly smaller ID sizes read from QEMU ACPI tables.
Pad OEM_ID/OEM_TABLE_ID manually with spaces so that values the test
puts on QEMU CLI and expected values match.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have a CONFIG_ISAPC switch - but we're not using it yet.
Add some "#ifdefs" to make it possible to disable this machine now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220107160713.235918-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -device JSON syntax impl leaks a reference on the created
DeviceState instance. As a result when you hot-unplug the
device, the device_finalize method won't be called and thus
it will fail to emit the required DEVICE_DELETED event.
A 'json-cli' feature was previously added against the
'device_add' QMP command QAPI schema to indicated to mgmt
apps that -device supported JSON syntax. Given the hotplug
bug that feature flag is not usable for its purpose, so
we add a new 'json-cli-hotplug' feature to indicate the
-device supports JSON without breaking hotplug.
Fixes: 5dacda5167
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/802
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220105123847.4047954-2-berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With more recent versions of Meson, the build.ninja file is more selective
as to what is built by default, and not building the modules results in test
failures.
Mark the modules as built-by-default and, to make the dependencies more
precise, also require them to be up-to-date before running tests.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/801
Tested-by: Li Zhang <lizhang@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The updated TPM related tables have the following additions:
Device (TPM)
{
Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID
+ Name (_STR, "TPM 2.0 Device") // _STR: Description String
+ Name (_UID, One) // _UID: Unique ID
Name (_STA, 0x0F) // _STA: Status
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-4-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-4-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace existing TPM related tables, that are about to change, with
empty files.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-2-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-2-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When user uses '-acpitable' to add SLIC table, some ACPI
tables (FADT) will change its 'Oem ID'/'Oem Table ID' fields to
match that of SLIC. Test makes sure thati QEMU handles
those fields correctly when SLIC table is added with
'-acpitable' option.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The lsi53c895a SCSI controller might have been disabled in the target
binary, so let's check for its availability first before using it.
Message-Id: <20211222153600.976588-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The user might have disabled the pc-i440fx machine type (or it's older
versions, like done in downstream RHEL) in the QEMU binary, so let's
better check whether the machine types are available before using them.
Message-Id: <20211222153923.1000420-1-thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_test_rand_int() must not be called before g_test_init(), otherwise
the glib will show a "g_rand_int: assertion 'rand != NULL' failed"
message in the log. So we could change the order here, but actually,
it's safer to use g_file_open_tmp() anyway, so let's use that function
now instead.
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211222083652.776592-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Machines might not always be compiled into the QEMU binary, so
we should skip the test instead of failing if it is not available.
Message-Id: <20211220081054.151515-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Downstream users might want to disable legacy devices in their binaries,
so we should not blindly assume that they are available. Add some proper
checks before using them.
Message-Id: <20211220081054.151515-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The users might have built QEMU with less machines or without the
i82378 superio device. Add some checks to the endianess-test so that
it is able to deal with such stripped down QEMU versions, too.
Message-Id: <20211220081054.151515-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Devices might not always be compiled into the QEMU target binaries.
We already have the libqos framework that is good for handling such
situations, but some of the qtests are not a real good fit for the
libqos framework. Let's add a qtest_has_device() function for such
tests instead.
Message-Id: <20211220081054.151515-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These filter tests need a NIC, no matter which one, so they use a common
NIC by default. However, these common NIC models might not always have
been compiled into the QEMU target binary, so assuming that a certain NIC
is available is a bad idea. Since the exact type of NIC does not really
matter for these tests, let's switch to "-nic" instead of "-netdev" so
that QEMU can simply pick a default NIC for us.
This way we can now run the tests on other targets that have a default
machine with an on-board/default NIC, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211220103025.311759-1-thuth@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running the qtests, there are currently a bunch of warnings about
the deprecated sga device during the boot-serial-test. Switch to
"-M graphics=off" to silence these warnings.
Message-Id: <20211220164042.397028-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cover basic display interface usage. More cases to be added to cover
disconnections, multiple connections, corner cases. At this point, they
would be better written in Rust or Python though.
The proxy also covers reading the properties, since they are
automatically loaded at creation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Although not used by the backend itself, use a common location for
documentation and sharing purposes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Without the previous commit, this test triggers:
$ make check-qtest-x86_64
[...]
Running test qtest-x86_64/fuzz-megasas-test
qemu-system-x86_64: softmmu/physmem.c:3229: address_space_unmap: Assertion `mr != NULL' failed.
Broken pipe
ERROR qtest-x86_64/fuzz-megasas-test - too few tests run (expected 2, got 1)
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20211119201141.532377-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* General cleanup for Mac machines (Peter)
* Fixes for FPU exceptions (Lucas)
* Support for new ISA31 instructions (Matheus)
* Fixes for ivshmem (Daniel)
* Cleanups for PowerNV PHB (Christophe and Cedric)
* Updates of PowerNV and pSeries documentation (Leonardo and Daniel)
* Fixes for PowerNV (Daniel)
* Large cleanup of FPU implementation (Richard)
* Removal of SoftTLBs support for PPC74x CPUs (Fabiano)
* Fixes for exception models in MPCx and 60x CPUs (Fabiano)
* Removal of 401/403 CPUs (Cedric)
* Deprecation of taihu machine (Thomas)
* Large rework of PPC405 machine (Cedric)
* Fixes for VSX instructions (Victor and Matheus)
* Fix for e6500 CPU (Fabiano)
* Initial support for PMU (Daniel)
-----BEGIN PGP SIGNATURE-----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=APFd
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20211217' of https://github.com/legoater/qemu into staging
ppc 7.0 queue:
* General cleanup for Mac machines (Peter)
* Fixes for FPU exceptions (Lucas)
* Support for new ISA31 instructions (Matheus)
* Fixes for ivshmem (Daniel)
* Cleanups for PowerNV PHB (Christophe and Cedric)
* Updates of PowerNV and pSeries documentation (Leonardo and Daniel)
* Fixes for PowerNV (Daniel)
* Large cleanup of FPU implementation (Richard)
* Removal of SoftTLBs support for PPC74x CPUs (Fabiano)
* Fixes for exception models in MPCx and 60x CPUs (Fabiano)
* Removal of 401/403 CPUs (Cedric)
* Deprecation of taihu machine (Thomas)
* Large rework of PPC405 machine (Cedric)
* Fixes for VSX instructions (Victor and Matheus)
* Fix for e6500 CPU (Fabiano)
* Initial support for PMU (Daniel)
# gpg: Signature made Fri 17 Dec 2021 09:20:31 AM PST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20211217' of https://github.com/legoater/qemu: (101 commits)
ppc/pnv: Use QOM hierarchy to scan PEC PHB4 devices
ppc/pnv: Move realize of PEC stacks under the PEC model
ppc/pnv: Remove "system-memory" property from PHB4 PEC
ppc/pnv: Compute the PHB index from the PHB4 PEC model
ppc/pnv: Introduce a num_stack class attribute
ppc/pnv: Introduce a "chip" property under the PHB4 model
ppc/pnv: Introduce version and device_id class atributes for PHB4 devices
ppc/pnv: Introduce a num_pecs class attribute for PHB4 PEC devices
ppc/pnv: Use QOM hierarchy to scan PHB3 devices
ppc/pnv: Move mapping of the PHB3 CQ regions under pnv_pbcq_realize()
ppc/pnv: Drop the "num-phbs" property
ppc/pnv: Use the chip class to check the index of PHB3 devices
ppc/pnv: Introduce a "chip" property under PHB3
PPC64/TCG: Implement 'rfebb' instruction
target/ppc/power8-pmu.c: add PM_RUN_INST_CMPL (0xFA) event
target/ppc: enable PMU instruction count
target/ppc: enable PMU counter overflow with cycle events
target/ppc: PMU: update counters on MMCR1 write
target/ppc: PMU: update counters on PMCs r/w
target/ppc: PMU basic cycle count for pseries TCG
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This test, if enabled by hand, was failing when the ivhsmem device was
being declared as DEVICE_NATIVE_ENDIAN with the following error:
/ppc64/ivshmem/pair: OK
/ppc64/ivshmem/server:
**
ERROR:/home/danielhb/qemu/tests/qtest/ivshmem-test.c:367:test_ivshmem_server:
assertion failed (ret != 0): (0 != 0)
Aborted
After the endianness change done in the previous patch, we can verify in
both a a Power 9 little-endian host and in a Power 8 big-endian host
that this test is now passing:
$ QTEST_QEMU_BINARY=./ppc64-softmmu/qemu-system-ppc64 ./tests/qtest/ivshmem-test -m slow
/ppc64/ivshmem/single: OK
/ppc64/ivshmem/hotplug: OK
/ppc64/ivshmem/memdev: OK
/ppc64/ivshmem/pair: OK
/ppc64/ivshmem/server: OK
Let's keep it that way by officially enabling it for ppc64.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211124092948.335389-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538
The old API took the size of the memory to duplicate as a guint,
whereas most memory functions take memory sizes as a gsize. This
made it easy to accidentally pass a gsize to g_memdup(). For large
values, that would lead to a silent truncation of the size from 64
to 32 bits, and result in a heap area being returned which is
significantly smaller than what the caller expects. This can likely
be exploited in various modules to cause a heap buffer overflow.
Replace g_memdup() by the safer g_memdup2() wrapper.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903174510.751630-25-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG5yEgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOFkwf9Glt3tnHfO/gWZectiMAjjM8vg3cR
yEsWU0fa0iu8MO8NiOW0b6DT0yosZ8rl2SYSZBQGqwa/Lq2MZLO2v0JG4LblBom7
WVmzNOG4t0OFoE2gwMlZ2J+ppaHV5zN1Yc6lMXOVQcefY0pXoyze+0Fq/cwKf2+p
6WDZTuOpjtxMwt9n71b93kNAHagk422MpNi1xi+o37hNsm/Zh3BTtaSJ7WCkCmWq
YmwwQZgyB/V0Ah42wchuf5zxEnQPMbjaQSu8jQU4iyCB7+2biBuh3Cqw5eR8tqC1
cGNINGlo2Orl9ASyEunHyuDj8p0wN8J37wNuBo4kghhrTVsVKQYF0wmsqw==
=U1Xy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* improve compatibility for macOS scripts/entitlement.sh (Evan)
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
# gpg: Signature made Wed 15 Dec 2021 02:49:44 AM PST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
configure: remove dead variables
doc: Add the SGX numa description
numa: Support SGX numa in the monitor and Libvirt interfaces
numa: Enable numa for SGX EPC sections
kvm: add support for KVM_GUESTDBG_BLOCKIRQ
gdbstub, kvm: let KVM report supported singlestep flags
gdbstub: reject unsupported flags in handle_set_qemu_sstep
linux-headers: update to 5.16-rc1
virtio-gpu: do not byteswap padding
scripts/entitlement.sh: Use backward-compatible cp flags
qapi/machine.json: Fix incorrect description for die-id
tests/qtest: Add fuzz-lsi53c895a-test
hw/scsi/lsi53c895a: Do not abort when DMA requested and no data queued
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VIOT test does not always work under KVM on the virt machine:
PASS 5 qtest-aarch64/bios-tables-test /aarch64/acpi/virt/oem-fields
qemu-system-aarch64: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Broken pipe
Make it TCG only.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
-----BEGIN PGP SIGNATURE-----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=KuTi
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
# gpg: Signature made Wed 15 Dec 2021 02:39:37 AM PST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/acpi: add expected blob for VIOT test on virt machine
tests/acpi: add expected blobs for VIOT test on q35 machine
tests/acpi: add test case for VIOT
tests/acpi: allow updates of VIOT expected data files
hw/arm/virt: Use object_property_set instead of qdev_prop_set
hw/arm/virt: Reject instantiation of multiple IOMMUs
hw/arm/virt: Remove device tree restriction for virtio-iommu
hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu
hw/net: npcm7xx_emc fix missing queue_flush
target/arm: Correct calculation of tlb range invalidate length
hw/arm: Don't include qemu-common.h unnecessarily
target/rx/cpu.h: Don't include qemu-common.h
target/hexagon/cpu.h: don't include qemu-common.h
include/hw/i386: Don't include qemu-common.h in .h files
target/i386: Use assert() to sanity-check b1 in SSE decode
tests/tcg: Add arm and aarch64 pc alignment tests
target/arm: Suppress bp for exceptions with more priority
target/arm: Assert thumb pc is aligned
target/arm: Take an exception if PC is misaligned
target/arm: Split compute_fsr_fsc out of arm_deliver_fault
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add two test cases for VIOT, one on the q35 machine and the other on
virt. To test complex topologies the q35 test has two PCIe buses that
bypass the IOMMU (and are therefore not described by VIOT), and two
buses that are translated by virtio-iommu.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-7-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create empty data files and allow updates for the upcoming VIOT tests.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-6-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the framework to test the virtio-iommu-pci device
and tests exercising the attach/detach, map/unmap API.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211127072910.1261824-5-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is nowadays possible to build QEMU with a reduced set of machines
in each binary. However, the qtests still hard-code the expected
machines and fail if the binary does not feature the required machine.
Let's get a little bit more flexible here: Add a function that can be
used to query whether a certain machine is available or not, and use
it in some tests as an example (more work has to be done in other
tests which will follow later).
Message-Id: <20211201104347.51922-5-thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For the upcoming patches, we will need a way to gets a list with all
available machine types. Refactor the qtest_cb_for_every_machine()
to split the related code out into a separate new function, and
gather the aliases of the various machine types, too.
Message-Id: <20211201104347.51922-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'xlnx-can-test' and the 'fuzz-xlnx-dp-test' need the "xlnx-zcu102"
machine and thus should only be built and run if CONFIG_XLNX_ZYNQMP_ARM
is enabled.
Message-Id: <20211201104347.51922-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ppc64 target is a superset of the 32-bit target, so we should
include the tests here, too. This used to be done in the past already,
but it got lost during the conversion to meson.
Fixes: a2ce7dbd91 ("meson: convert tests/qtest to meson")
Message-Id: <20211201104347.51922-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add some tests to check the state of the machine if the migration
is cancelled while we are using virtio-net failover.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211208130350.10178-4-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add test cases to test several error cases that must be
generated by invalid failover configuration.
Add a combination of coldplug and hotplug test cases to be
sure the primary is correctly managed according the
presence or not of the STANDBY feature.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211208130350.10178-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Scan the PCI devices to find bridge and set PCI_SECONDARY_BUS and
PCI_SUBORDINATE_BUS (algorithm from seabios)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211208130350.10178-2-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Without the previous commit, when running 'make check-qtest-i386'
with QEMU configured with '--enable-sanitizers' we get:
AddressSanitizer:DEADLYSIGNAL
=================================================================
==287878==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000344
==287878==The signal is caused by a WRITE memory access.
==287878==Hint: address points to the zero page.
#0 0x564b2e5bac27 in blk_inc_in_flight block/block-backend.c:1346:5
#1 0x564b2e5bb228 in blk_pwritev_part block/block-backend.c:1317:5
#2 0x564b2e5bcd57 in blk_pwrite block/block-backend.c:1498:11
#3 0x564b2ca1cdd3 in fdctrl_write_data hw/block/fdc.c:2221:17
#4 0x564b2ca1b2f7 in fdctrl_write hw/block/fdc.c:829:9
#5 0x564b2dc49503 in portio_write softmmu/ioport.c:201:9
Add the reproducer for CVE-2021-20196.
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20211124161536.631563-4-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Without the previous commit, this test triggers:
$ make check-qtest-x86_64
[...]
Running test qtest-x86_64/fuzz-lsi53c895a-test
qemu-system-x86_64: hw/scsi/lsi53c895a.c:624: lsi_do_dma: Assertion `s->current' failed.
ERROR qtest-x86_64/fuzz-lsi53c895a-test - too few tests run (expected 1, got 0)
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211123111732.83137-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based upon the qtest reproducer posted to Gitlab issue #724 at
https://gitlab.com/qemu-project/qemu/-/issues/724.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211118100327.29061-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-net-test has an hotplug testcase that is never executed.
This is because the testcase is attached to virtio-pci interface
rather than to virtio-net-pci.
$ QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/qos-test -l | grep hotplug
/x86_64/.../pci-ohci-tests/ohci_pci-test-hotplug
/x86_64/.../e1000e/e1000e-tests/hotplug
/x86_64/.../virtio-blk-pci/virtio-blk-pci-tests/hotplug
/x86_64/.../vhost-user-blk-pci/vhost-user-blk-pci-tests/hotplug
/x86_64/.../virtio-rng-pci/virtio-rng-pci-tests/hotplug
/x86_64/.../virtio-scsi/virtio-scsi-tests/hotplug
/x86_64/.../virtio-serial/virtio-serial-tests/hotplug
With this fix:
$ QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/qos-test -l | grep hotplug
...
/x86_64/.../vhost-user-blk-pci/vhost-user-blk-pci-tests/hotplug
/x86_64/.../virtio-net-pci/virtio-net-pci-tests/hotplug
/x86_64/.../virtio-rng-pci/virtio-rng-pci-tests/hotplug
...
$ QTEST_QEMU_BINARY=./qemu-system-x86_64 tests/qtest/qos-test -p /x86_64/.../virtio-net-pci-tests/hotplug
/x86_64/pc/i440FX-pcihost/pci-bus-pc/pci-bus/virtio-net-pci/virtio-net-pci-tests/hotplug: OK
Fixes: 6ae333f91b ("qos-test: virtio-net test node")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211028173014.139692-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmGBgjkdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8sAAgAsHaW2sHH/W4TzCwl
DfqFar4u047Q+ZtQHjNehGHF9Bxp4NS4A0qL52vk0hVoqeWlyF1N29MOnewgVDqY
q1x+uxJtG9xjTse7oEEshEEFF/7J8eB8dN4E78TFn/6IhvVhGiUeeRu29s44Ot6N
E2KABcXfd+4gEdqhepLGEbi5n0TnA8ARmmeffZNWVEbsxQjHnMQQYmqGmllB3xV3
qPpnp3avvD1015zMwrLVmlDO+tSRr/1bed7k3k26ebga2B/zitxcpXFNCDlgePx0
LNT5QYvBDpE7HOruGQjf4iXPJHfYw5VMtopK7K++rY9KWiJgBVSjQUcB462sdCPk
wNAp0g==
=vlZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211102-2' into staging
Add nuvoton sd module for NPCM7XX
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
# gpg: Signature made Tue 02 Nov 2021 02:23:53 PM EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-arm-20211102-2:
hvf: arm: Ignore cache operations on MMIO
hw/arm/virt: Rename default_bus_bypass_iommu
target/arm: Use tcg_constant_i32() in gen_rev16()
target/arm: Use tcg_constant_i64() in do_sat_addsub_64()
target/arm: Use the constant variant of store_cpu_field() when possible
target/arm: Introduce store_cpu_field_constant() helper
target/arm: Use tcg_constant_i32() in op_smlad()
target/arm: Advertise MVE to gdb when present
tests/qtest/libqos: add SDHCI commands
hw/arm: Attach MMC to quanta-gbs-bmc
hw/arm: Add Nuvoton SD module to board
hw/sd: add nuvoton MMC
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a counterpart to the HMP "info opcount" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info jit" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info profile" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Based upon the qtest reproducer posted to Gitlab issue #663 at
https://gitlab.com/qemu-project/qemu/-/issues/663.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211101183516.8455-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit d7346e614f ("acpi: x86: pcihp: add support hotplug on multifunction bridges")
added ACPI hotplug descriptions for cold plugged bridges for functions other
than 0. For all other devices, the ACPI hotplug descriptions are limited to
function 0 only. This change adds unit tests for this feature.
This test adds the following devices to qemu and then checks the changes
introduced in the DSDT table due to the addition of the following devices:
(a) a multifunction bridge device
(b) a bridge device with function 1
(c) a non-bridge device with function 2
In the DSDT table, we should see AML hotplug descriptions for (a) and (b).
For (a) we should find a hotplug AML description for function 0.
The following diff compares the DSDT table AML with the new unit test before
and after the change d7346e614f is introduced. In other words,
this diff reflects the changes that occurs in the DSDT table due to the change
d7346e614f .
@@ -1,60 +1,38 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20190509 (64-bit version)
* Copyright (c) 2000 - 2019 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT.multi-bridge, Thu Oct 7 18:56:05 2021
+ * Disassembly of /tmp/aml-AN0DA1, Thu Oct 7 18:56:05 2021
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x000020FE (8446)
+ * Length 0x00002187 (8583)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xDE
+ * Checksum 0x8D
* OEM ID "BOCHS "
* OEM Table ID "BXPC "
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
- /*
- * iASL Warning: There was 1 external control method found during
- * disassembly, but only 0 were resolved (1 unresolved). Additional
- * ACPI tables may be required to properly disassemble the code. This
- * resulting disassembler output file may not compile because the
- * disassembler did not know how many arguments to assign to the
- * unresolved methods. Note: SSDTs can be dynamically loaded at
- * runtime and may or may not be available via the host OS.
- *
- * In addition, the -fe option can be used to specify a file containing
- * control method external declarations with the associated method
- * argument counts. Each line of the file must be of the form:
- * External (<method pathname>, MethodObj, <argument count>)
- * Invocation:
- * iasl -fe refs.txt -d dsdt.aml
- *
- * The following methods were unresolved and many not compile properly
- * because the disassembler had to guess at the number of arguments
- * required for each:
- */
- External (_SB_.PCI0.S19_.PCNT, MethodObj) // Warning: Unknown method, guessing 1 arguments
-
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
Method (DBUG, 1, NotSerialized)
{
ToHexString (Arg0, Local0)
ToBuffer (Local0, Local0)
Local1 = (SizeOf (Local0) - One)
Local2 = Zero
While ((Local2 < Local1))
{
@@ -3322,24 +3300,60 @@
Method (DVNT, 2, NotSerialized)
{
If ((Arg0 & One))
{
Notify (S00, Arg1)
}
}
Method (PCNT, 0, NotSerialized)
{
BNUM = One
DVNT (PCIU, One)
DVNT (PCID, 0x03)
}
}
+ Device (S19)
+ {
+ Name (_ADR, 0x00030001) // _ADR: Address
+ Name (BSEL, Zero)
+ Device (S00)
+ {
+ Name (_SUN, Zero) // _SUN: Slot User Number
+ Name (_ADR, Zero) // _ADR: Address
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ PCEJ (BSEL, _SUN)
+ }
+
+ Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
+ {
+ Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, _SUN))
+ }
+ }
+
+ Method (DVNT, 2, NotSerialized)
+ {
+ If ((Arg0 & One))
+ {
+ Notify (S00, Arg1)
+ }
+ }
+
+ Method (PCNT, 0, NotSerialized)
+ {
+ BNUM = Zero
+ DVNT (PCIU, One)
+ DVNT (PCID, 0x03)
+ }
+ }
+
Method (PCNT, 0, NotSerialized)
{
- ^S19.PCNT (^S10.PCNT ())
+ ^S19.PCNT ()
+ ^S10.PCNT ()
}
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211007135750.1277213-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
We are adding a new unit test to cover the acpi hotplug support in q35 for
multi-function bridges. This test uses a new table DSDT.multi-bridge.
We need to allow changes in DSDT acpi table for addition of this new
unit test.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211007135750.1277213-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
A recommended way to populate new tables is to have an
empty expected file. In this case, attempts to disassemble
will fail but it is useful to disassemble the actual files.
Detect and skip decompile step in this case.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu-storage-daemon is launched with the vhost-user listen socket path.
The path is first unlinked before opening the listen socket. This
prevents stale UNIX domain socket files from stopping socket
initialization.
This behavior is undesirable in vhost-user-blk-test and the cause of a
bug:
There is a race condition in vhost-user-blk-test when QEMU launches
before QSD. It connects to the old socket that QSD unlinks and the
vhost-user connection is never serviced, resulting in a hang.
Pass the listen socket fd to QSD to maintain listen socket continuity
and prevent the lost connection.
Fixes: 806952026d ("test: new qTest case to test the vhost-user-blk-server")
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211019135655.83067-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.. only if TCG is available
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-16-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210902113551.461632-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and drop custom function that were doing the job
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
follow up call with smbios options generates the same ACPI tables,
so there is no need to run smbios-less variant at all.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set -smp 1,maxcpus=288 to test for ACPI code that
deal with CPUs with large APIC ID (>255).
PS:
Test requires KVM and in-kernel irqchip support,
so skip test if KVM is not available.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently it is not possible to create tests that have KVM as a hard
requirement on a host that doesn't support KVM for tested target
binary (modulo going through the trouble of compiling out
the offending test case).
Following scenario makes test fail when it's run on non x86 host:
qemu-system-x86_64 -enable-kvm -M q35,kernel-irqchip=on -smp 1,maxcpus=288
This patch introduces qtest_has_accel() to let users check if accel is
available in advance and avoid executing non run-able test-cases.
It implements detection of TCG and KVM only, the rest could be
added later on, when we actually start testing them in qtest.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Oleinik <alxndr@bu.edu>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211007130829.632254-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.
One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in the testcases
that have strong dependency on the parsing results.
Currently, test_def_cpu_split use "-smp 8" and will get 8 CPU sockets
based on current parsing rule. But if we change to prefer cores over
sockets we will get one CPU socket with 8 cores, and this testcase
will not get expected numa set by default on x86_64 (Ok on aarch64).
So now explicitly use "-smp 8,sockets=8" to avoid affect from parsing
logic change.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-9-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in testing if we
have strong dependency on the parsing results.
pc_dynamic_cpu_cfg currently assumes/needs that there will be 2 CPU
sockets with "-smp 2". To avoid breaking the test because of parsing
logic change, now explicitly use "-smp 2,sockets=2".
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-8-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the test if bzip2 is not available, and run it after they are
uncompressed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt can use query-sgx-capabilities to get the host
sgx capabilities to decide how to allocate SGX EPC size to VM.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP and HMP interfaces can be used by monitor or QMP tools to retrieve
the SGX information from VM side when SGX is enabled on Intel platform.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_setenv() can fail; check for it when starting a QEMU process
when we set the QEMU_AUDIO_DRV environment variable.
Because this happens after fork() reporting an exact message
via printf() is a bad idea; just exit(1), as we already do
for the case of execlp() failure.
Fixes: Coverity CID 1460117
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210820163750.9106-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ec6M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/a1xndr/tags/fuzz-pull-2021-09-01' into staging
Fuzzing Patches for 2021-09-01
# gpg: Signature made Wed 01 Sep 2021 12:42:00 BST
# gpg: using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E
# gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAD4 E2BF 8713 75D6 3405 17C4 4E66 1DDE 583A 964E
* remotes/a1xndr/tags/fuzz-pull-2021-09-01:
MAINTAINERS: add fuzzing reviewer
MAINTAINERS: Add myself as a reviewer for Device Fuzzing
fuzz: unblock SIGALRM so the timeout works
fuzz: use ITIMER_REAL for timeouts
fuzz: add an instrumentation filter
fuzz: make object-name matching case-insensitive
fuzz: adjust timeout to allow for longer inputs
fuzz: fix sparse memory access in the DMA callback
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmEvbmcACgkQda1lgCoL
QhEmtggAgWR8p/4awhUoTscEkLBoilxJATTZBkxbN8NrRYmOIIn29QShhEDhvuG9
t6ch0DrJuSVMISTnMHtE5XJKBBD8vFS04SaD4Op8NgOyKTd2fQSXx6SyqgQVK0ui
zfZFjcjam9i+onIGVCSoUkGRL5GMOTougTh4SwMndR9sL9cn7lUQEJZbk7kS1II6
5r6uvKPtY4fyvxsi0wcHOYFSeajJfQOVZkav7JCnvuXiiCjQzZw2Aadsvrkmt3Y4
oaOTiOvYWJhNqFhWSuyY7gS4E4fjShwr3UuOcsmKUTu56Uf2GgdA9w4+AfZJQSxG
C1Vi+u5J8+oZzVHna9T1lRKQ5wLfCA==
=IprO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2021-09-01-1' into staging
Merge tpm 2021/09/01 v1
# gpg: Signature made Wed 01 Sep 2021 13:13:27 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2021-09-01-1:
tests: acpi: tpm1.2: Add expected TPM 1.2 ACPI blobs
tests: acpi: Add test cases for TPM 1.2 with TCPA table
tests: Use QMP to check whether a TPM device model is available
tests: acpi: prepare for new TPM 1.2 related tables
tests: tpm: Create TPM 1.2 response in TPM emulator
tests: acpi: tpm2: Add the renamed ACPI files and drop old ones
tests: Add suffix 'tpm2' or 'tpm12' to ACPI table files
tests: acpi: Prepare for renaming of TPM2 related ACPI files
tests: Add tpm_version field to TPMTestState and fill it
tests: Rename TestState to TPMTestState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The timeout mechanism won't work if SIGALRM is blocked. This changes
unmasks SIGALRM when the timer is installed. This doesn't completely
solve the problem, as the fuzzer could trigger some device activity that
re-masks SIGALRM. However, there are currently no inputs on OSS-Fuzz
that re-mask SIGALRM and timeout. If that turns out to be a real issue,
we could try to hook sigmask-type calls, or use a separate timer thread.
Based-on: <20210713150037.9297-1-alxndr@bu.edu>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Using ITIMER_VIRTUAL is a bad idea, if the fuzzer hits a blocking
syscall - e.g. ppoll with a NULL timespec. This causes timeout issues
while fuzzing some block-device code. Fix that by using wall-clock time.
This might cause inputs to timeout sometimes due to scheduling
effects/ambient load, but it is better than bringing the entire fuzzing
process to a halt.
Based-on: <20210713150037.9297-1-alxndr@bu.edu>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
We have some configs for devices such as the AC97 and ES1370 that were
not matching memory-regions correctly, because the configs provided
lowercase names. To resolve these problems and prevent them from
occurring again in the future, convert both the pattern and names to
lower-case, prior to checking for a match.
Suggested-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Using a custom timeout is useful to continue fuzzing complex devices,
even after we run into some slow code-path. However, simply adding a
fixed timeout to each input effectively caps the maximum input
length/number of operations at some artificial value. There are two
major problems with this:
1. Some code might only be reachable through long IO sequences.
2. Longer inputs can actually be _better_ for performance. While the
raw number of fuzzer executions decreases with larger inputs, the
number of MMIO/PIO/DMA operation/second actually increases, since
were are speding proportionately less time fork()ing.
With this change, we keep the custom-timeout, but we renew it, prior to
each MMIO/PIO/DMA operation. Thus, we time-out only when a specific
operation takes a long time.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
The code mistakenly relied on address_space_translate to store the
length remaining until the next memory-region. We care about this
because when there is RAM or sparse-memory neighboring on an MMIO
region, we should only write up to the border, to prevent inadvertently
invoking MMIO handlers within the DMA callback.
However address_space_translate_internal only stores the length until
the end of the MemoryRegion if memory_region_is_ram(mr). Otherwise
the *len is left unmodified. This caused some false-positive issues,
where the fuzzer found a way to perform a nested MMIO write through a
DMA callback on an [address, length] that started within sparse memory
and spanned some device MMIO regions.
To fix this, write to sparse memory in small chunks of
memory_access_size (similar to the underlying address_space_write code),
which will prevent accidentally hitting MMIO handlers through large
writes.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add tests that the A64FX CPU model exposes the expected features.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
[PMM: added commit message body]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 155e1c82ed deprecated the raspi2/raspi3 machine names.
Use the recommended new names: raspi2b and raspi3b.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210827060815.2384760-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-10-stefanb@linux.ibm.com
Use QMP to check whether a given TPM device model is available and if it
is not the case then do not register the tests that require it.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210802215246.1433175-9-stefanb@linux.ibm.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-8-stefanb@linux.ibm.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-6-stefanb@linux.ibm.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-5-stefanb@linux.ibm.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210802215246.1433175-4-stefanb@linux.ibm.com
xlnx_dp_read allows an out-of-bounds read at its default branch because
of an improper index.
According to
https://www.xilinx.com/html_docs/registers/ug1087/ug1087-zynq-ultrascale-registers.html
(DP Module), registers 0x3A4/0x3A4/0x3AC are allowed.
DP_INT_MASK 0x000003A4 32 mixed 0xFFFFF03F Interrupt Mask Register for intrN.
DP_INT_EN 0x000003A8 32 mixed 0x00000000 Interrupt Enable Register.
DP_INT_DS 0x000003AC 32 mixed 0x00000000 Interrupt Disable Register.
In xlnx_dp_write, when the offset is 0x3A8 and 0x3AC, the virtual device
will write s->core_registers[0x3A4
>> 2]. That is to say, the maxize of s->core_registers could be ((0x3A4
>> 2) + 1). However, the current size of s->core_registers is (0x3AF >>
>> 2), that is ((0x3A4 >> 2) + 2), which is out of the range.
In xlxn_dp_read, the access to offset 0x3A8 or 0x3AC will be directed to
the offset 0x3A8 (incorrect functionality) or 0x3AC (out-of-bounds read)
rather than 0x3A4.
This patch enforces the read access to offset 0x3A8 and 0x3AC to 0x3A4,
but does not adjust the size of s->core_registers to avoid breaking
migration.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <1628059910-12060-1-git-send-email-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Zero-initialize the sockaddr_in struct that we're about to fill in
and pass to bind(), to ensure we don't leave possible
implementation-defined extension fields as uninitialized garbage.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20210813150506.7768-4-peter.maydell@linaro.org
The vhost-user-blk-test currently hangs if QTEST_QEMU_STORAGE_DAEMON_BINARY
points to a non-existing binary. Let's improve this situation by checking
for the availability of the binary first, so we can fail gracefully if
it is not accessible.
Message-Id: <20210811095949.133462-1-thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-blk-test needs the qemu-storage-daemon, otherwise it
currently hangs. So make sure that we build the daemon before running
the tests.
Message-Id: <20210811094705.131314-1-thuth@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
OSS-Fuzz found sending illegal addresses when querying the write
protection bits triggers the assertion added in commit 84816fb63e
("hw/sd/sdcard: Assert if accessing an illegal group"):
qemu-fuzz-i386-target-generic-fuzz-sdhci-v3: ../hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t):
Assertion `wpnum < sd->wpgrps_size' failed.
#3 0x7f62a8b22c91 in __assert_fail
#4 0x5569adcec405 in sd_wpbits hw/sd/sd.c:824:9
#5 0x5569adce5f6d in sd_normal_command hw/sd/sd.c:1389:38
#6 0x5569adce3870 in sd_do_command hw/sd/sd.c:1737:17
#7 0x5569adcf1566 in sdbus_do_command hw/sd/core.c💯16
#8 0x5569adcfc192 in sdhci_send_command hw/sd/sdhci.c:337:12
#9 0x5569adcfa3a3 in sdhci_write hw/sd/sdhci.c:1186:9
#10 0x5569adfb3447 in memory_region_write_accessor softmmu/memory.c:492:5
It is legal for the CMD30 to query for out-of-range addresses.
Such invalid addresses are simply ignored in the response (write
protection bits set to 0).
In commit 84816fb63e ("hw/sd/sdcard: Assert if accessing an illegal
group") we misplaced the assertion *before* we test the address is
in range. Move it *after*.
Include the qtest reproducer provided by Alexander Bulekov:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed.
Cc: qemu-stable@nongnu.org
Reported-by: OSS-Fuzz (Issue 29225)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 84816fb63e ("hw/sd/sdcard: Assert if accessing an illegal group")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/495
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210802235524.3417739-3-f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Even if <linux/kvm.h> seems to exist for all archs on linux, however including
it with __linux__ defined seems to be not working yet as it'll try to include
asm/kvm.h and that can be missing for archs that do not support kvm.
To fix this (instead of any attempt to fix linux headers..), we can mark the
header to be x86_64 only, because it's so far only service for adding the kvm
dirty ring test.
Fixes: 1f546b709d ("tests: migration-test: Add dirty ring test")
Reported-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210728214128.206198-1-peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a regression test for mmio read on big-endian hosts.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
This will test the PMR functionality.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: replaced memory-backend-file with memory-backend-ram]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
OpenBSD doesn't like :0 as an address, switch to using 127.0.0.1
in baddest; it's really testing the :0 port number that isn't allowed
on anything.
(The test doesn't currently run anyway because of the userfault
problem that Peter noticed, but this gets us closer to being able to
reenable it)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210719185217.122105-1-dgilbert@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
OSS-Fuzz found sending illegal addresses when querying the write
protection bits triggers an assertion:
qemu-fuzz-i386: hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t): Assertion `wpnum < sd->wpgrps_size' failed.
==11578== ERROR: libFuzzer: deadly signal
#8 0x7ffff628e091 in __assert_fail
#9 0x5555588f1a3c in sd_wpbits hw/sd/sd.c:824:9
#10 0x5555588dd271 in sd_normal_command hw/sd/sd.c:1383:38
#11 0x5555588d777c in sd_do_command hw/sd/sd.c
#12 0x555558cb25a0 in sdbus_do_command hw/sd/core.c💯16
#13 0x555558e02a9a in sdhci_send_command hw/sd/sdhci.c:337:12
#14 0x555558dffa46 in sdhci_write hw/sd/sdhci.c:1187:9
#15 0x5555598b9d76 in memory_region_write_accessor softmmu/memory.c:489:5
Similarly to commit 8573378e62 ("hw/sd: fix out-of-bounds check
for multi block reads"), check the address range before sending
the status of the write protection bits.
Include the qtest reproducer provided by Alexander Bulekov:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed.
Reported-by: OSS-Fuzz (Issue 29225)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/450
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210702155900.148665-4-f4bug@amsat.org>
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
-----BEGIN PGP SIGNATURE-----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=8708
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging
Some qemu updates for IPMI and I2C
Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.
Add support for I2C PMBus devices.
Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.
Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.
# gpg: Signature made Fri 09 Jul 2021 17:25:04 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/for-qemu-6.1-2: (24 commits)
tests/qtest: add tests for MAX34451 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add ADM1272 device
hw/i2c: add support for PMBus
ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct
hw/i2c: Introduce i2c_start_recv() and i2c_start_send()
hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()
hw/i2c: Make i2c_start_transfer() direction argument a boolean
hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()
hw/i2c: Remove confusing i2c_send_recv()
hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/misc/auxbus: Replace 'is_write' boolean by its value
hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases
hw/misc/auxbus: Fix MOT/classic I2C mode
hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/i2c/ppc4xx_i2c: Add reference to datasheet
hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/display/sm501: Simplify sm501_i2c_write() logic
hw/input/lm832x: Define TYPE_LM8323 in public header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New mini-kernel test for STM32VLDISCOVERY USART1.
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210617165647.2575955-5-erdnaxe@crans.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PAPR platform describes an OS environment that's presented by
a combination of a hypervisor and firmware. The features it specifies
require collaboration between the firmware and the hypervisor.
Since the beginning, the runtime component of the firmware (RTAS) has
been implemented as a 20 byte shim which simply forwards it to
a hypercall implemented in qemu. The boot time firmware component is
SLOF - but a build that's specific to qemu, and has always needed to be
updated in sync with it. Even though we've managed to limit the amount
of runtime communication we need between qemu and SLOF, there's some,
and it has become increasingly awkward to handle as we've implemented
new features.
This implements a boot time OF client interface (CI) which is
enabled by a new "x-vof" pseries machine option (stands for "Virtual Open
Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall
which implements Open Firmware Client Interface (OF CI). This allows
using a smaller stateless firmware which does not have to manage
the device tree.
The new "vof.bin" firmware image is included with source code under
pc-bios/. It also includes RTAS blob.
This implements a handful of CI methods just to get -kernel/-initrd
working. In particular, this implements the device tree fetching and
simple memory allocator - "claim" (an OF CI memory allocator) and updates
"/memory@0/available" to report the client about available memory.
This implements changing some device tree properties which we know how
to deal with, the rest is ignored. To allow changes, this skips
fdt_pack() when x-vof=on as not packing the blob leaves some room for
appending.
In absence of SLOF, this assigns phandles to device tree nodes to make
device tree traversing work.
When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree.
This adds basic instances support which are managed by a hash map
ihandle -> [phandle].
Before the guest started, the used memory is:
0..e60 - the initial firmware
8000..10000 - stack
400000.. - kernel
3ea0000.. - initramdisk
This OF CI does not implement "interpret".
Unlike SLOF, this does not format uninitialized nvram. Instead, this
includes a disk image with pre-formatted nvram.
With this basic support, this can only boot into kernel directly.
However this is just enough for the petitboot kernel and initradmdisk to
boot from any possible source. Note this requires reasonably recent guest
kernel with:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735
The immediate benefit is much faster booting time which especially
crucial with fully emulated early CPU bring up environments. Also this
may come handy when/if GRUB-in-the-userspace sees light of the day.
This separates VOF and sPAPR in a hope that VOF bits may be reused by
other POWERPC boards which do not support pSeries.
This assumes potential support for booting from QEMU backends
such as blockdev or netdev without devices/drivers used.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
[dwg: Adjusted some includes which broke compile in some more obscure
compilation setups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210708172556.1868139-6-titusr@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210708172556.1868139-4-titusr@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDkB7sUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOISgf+Nn5BiXQRY52DK/2PoG330F6UeOcp
kWFAE4k4qEktDiCcd5xKekiUd7h+TiRS8bLeycmRtiSXvbzXioE2eCelui0SZDQl
zpIb8wV2WaxrD/zUYPV7r5n+VFAaTCm9lUEzzqnwaThBG/Oat45gnossZEIWv85g
KtQMsSh3pc+KpTjWbIA8V01ohzwFE2q7cA9CB/pDgR3h8M5p4K0ZdaPoAO2auhvu
2sbu9oBl1JwqpIhPme9JR6Je5fMCILBRlXTvPgJ/0iaGdxcNmZxoflO/TZVFB1pl
tUiCu0GB0yEasMO1E6+cP7ezhm15Lz3vKqjr/boV5Y9osfU36k9xkLTvAg==
=itIm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* More Meson test conversions and configure cleanups
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin
# gpg: Signature made Tue 06 Jul 2021 08:35:23 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (40 commits)
config-host.mak: remove unused compiler-related lines
Set icon for QEMU binary on Mac OS
qemu-option: remove now-dead code
machine: add smp compound property
vl: switch -M parsing to keyval
keyval: introduce keyval_parse_into
keyval: introduce keyval_merge
qom: export more functions for use with non-UserCreatable objects
configure: convert compiler tests to meson, part 6
configure: convert compiler tests to meson, part 5
configure: convert compiler tests to meson, part 4
configure: convert compiler tests to meson, part 3
configure: convert compiler tests to meson, part 2
configure: convert compiler tests to meson, part 1
configure: convert HAVE_BROKEN_SIZE_MAX to meson
configure, meson: move CONFIG_IVSHMEM to meson
meson: store dependency('threads') in a variable
meson: sort existing compiler tests
configure, meson: convert libxml2 detection to meson
configure, meson: convert liburing detection to meson
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}". machine_smp_parse is replaced by the
setter for the property.
numa-test will now cover the new syntax, while other tests
still use -smp.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To lower the entry level for new developers, add a link to the 9p
developer docs (i.e. qemu wiki) to MAINTAINERS and to the beginning of
9p source files, that is to: https://wiki.qemu.org/Documentation/9p
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1leeDf-0008GZ-9q@lizzy.crudebyte.com>
Add dirty ring test if kernel supports it. Add the dirty ring parameter on
source should be mostly enough, but let's change the dest too to make them
match always.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210615175523.439830-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The I/O sampling rate range is enforced to 5000 to 45000HZ according to
commit a2cd86a9. Setting I/O sampling rate with command 41h/42h, a guest
user can break this assumption and trigger an assertion in audio_calloc
via command 0xd4. This patch restricts the I/O sampling rate range for
command 41h/42h.
Fixes: 85571bc741 ("audio merge (malc)")
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <1624502687-5214-1-git-send-email-cyruscyliu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use memory_region_size() to get the MemoryRegion size,
and display it with the '0x' prefix.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210612195842.1595999-1-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Leading underscores followed by a capital letter or underscore are
reserved by the C standard.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/369
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20210605174938.13782-1-email@aabouzied.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lots of this are expected to be coming in, create a directory for them.
Also move the tmp105.h file into the include directory where it
should be.
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
While the SB16 seems to work up to 48000 Hz, the "Sound Blaster Series
Hardware Programming Guide" limit the sampling range from 4000 Hz to
44100 Hz (Section 3-9, 3-10: Digitized Sound I/O Programming, tables
3-2 and 3-3).
Later, section 6-15 (DSP Commands) is more specific regarding the 41h /
42h registers (Set digitized sound output sampling rate):
Valid sampling rates range from 5000 to 45000 Hz inclusive.
There is no comment regarding error handling if the register is filled
with an out-of-range value. (See also section 3-28 "8-bit or 16-bit
Auto-initialize Transfer"). Assume limits are enforced in hardware.
This fixes triggering an assertion in audio_calloc():
#1 abort
#2 audio_bug audio/audio.c:119:9
#3 audio_calloc audio/audio.c:154:9
#4 audio_pcm_sw_alloc_resources_out audio/audio_template.h:116:15
#5 audio_pcm_sw_init_out audio/audio_template.h:175:11
#6 audio_pcm_create_voice_pair_out audio/audio_template.h:410:9
#7 AUD_open_out audio/audio_template.h:503:14
#8 continue_dma8 hw/audio/sb16.c:216:20
#9 dma_cmd8 hw/audio/sb16.c:276:5
#10 command hw/audio/sb16.c:0
#11 dsp_write hw/audio/sb16.c:949:13
#12 portio_write softmmu/ioport.c:205:13
#13 memory_region_write_accessor softmmu/memory.c:491:5
#14 access_with_adjusted_size softmmu/memory.c:552:18
#15 memory_region_dispatch_write softmmu/memory.c:0:13
#16 flatview_write_continue softmmu/physmem.c:2759:23
#17 flatview_write softmmu/physmem.c:2799:14
#18 address_space_write softmmu/physmem.c:2891:18
#19 cpu_outw softmmu/ioport.c:70:5
[*] http://www.baudline.com/solutions/full_duplex/sb16_pci/index.html
OSS-Fuzz Report: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=29174
Fixes: 85571bc741 ("audio merge (malc)")
Buglink: https://bugs.launchpad.net/bugs/1910603
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210616104349.2398060-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add test for issue #345
Signed-off-by: Kit Westneat <kit.westneat@gmail.com>
Message-Id: <20210603142022.676395-1-kit.westneat@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity points out that in tpm_test_swtpm_migration_test() we
assume that src_tpm_addr and dst_tpm_addr are non-NULL (we
pass them to tpm_util_migration_start_qemu() which will
unconditionally dereference them) but then later explicitly
check them for NULL. Remove the pointless checks.
Fixes: Coverity CID 1432367, 1432359
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-6-peter.maydell@linaro.org
Coverity points out that we calculate a 64-bit value using 32-bit
arithmetic; add the cast to force the multiply to be done as 64-bits.
(The overflow will never happen with the current test data.)
Fixes: Coverity CID 1432320
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-5-peter.maydell@linaro.org
Coverity notices that the checks against mkstemp() failing in
create_qcow2_with_mbr() are wrong: mkstemp returns -1 on failure but
the check is just "g_assert(fd)". Fix to use "g_assert(fd >= 0)",
matching the correct check in create_test_img().
Fixes: Coverity CID 1432274
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-4-peter.maydell@linaro.org
The e1000e_send_verify() test calls qemu_recv() but doesn't
check that the call succeeded, which annoys Coverity. Add
an explicit test check for the length of the data.
(This is a test check, not a "we assume this syscall always
succeeds", so we use g_assert_cmpint() rather than g_assert().)
Fixes: Coverity CID 1432324
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-3-peter.maydell@linaro.org
Coverity notes that we don't check for dup2() failing. Add some
assertions so that if it does ever happen we get some indication.
(This is similar to how we handle other "don't expect this syscall to
fail" checks in this test code.)
Fixes: Coverity CID 1432346
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20210525134458.6675-2-peter.maydell@linaro.org
On Fedora 32, using clang (version 10.0.1-3.fc32) we get:
tests/qtest/fuzz/fuzz.c:237:5: error: implicit declaration of function 'qemu_init' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
qemu_init(result.we_wordc, result.we_wordv, NULL);
^
qemu_init() is declared in "sysemu/sysemu.h", include this
header to fix.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210513162008.3922223-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Exercise input validation code paths in
block/export/vhost-user-blk-server.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case has the same tests as tests/virtio-blk-test.c except for
tests have block_resize. Since the vhost-user-blk export only serves one
client one time, two exports are started by qemu-storage-daemon for the
hotplug test.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Coverity notices that several places in the migration-test code fail
to free memory in error-exit paths. This is pretty unimportant in
test case code, but we can avoid having to manually free the memory
entirely by using g_autofree.
The places where Coverity spotted a leak were relating to early exits
not freeing 'uri' in test_precopy_unix(), do_test_validate_uuid(),
migrate_postcopy_prepare() and test_migrate_auto_converge(). This
patch converts all the string-allocation in the test code to
g_autofree for consistency.
Fixes: Coverity CID 1432313, 1432315, 1432352, 1432364
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210506185819.9010-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For us, assertions are always enabled, but side-effect expressions
inside the argument to g_assert() are bad style anyway. Fix three
occurrences in IPMI related tests, which will silence some Coverity
nits.
Fixes: CID 1432322, CID 1432287, CID 1432291
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210503165525.26221-4-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In rtc-test.c we know that s is non-NULL because qtest_start()
will return a non-NULL value, and we assume this when we
pass s to qtest_irq_intercept_in(). So we can drop the
initial assignment of NULL and the "if (s)" condition at
the end of the function.
Fixes: Coverity CID 1432353
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210503165525.26221-3-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
tpm_util_migration_start_qemu() allocates memory with g_strdup_printf()
but frees it with free() rather than g_free(), which provokes Coverity
complaints (CID 1432379, 1432350). Use the correct free function.
Fixes: Coverity CID 1432379, CID 1432350
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210503165525.26221-2-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Accidental use of "true" as a boolean; spotted by coverity
and Peter.
Fixes: b99784ef6c
Fixes: d795f47466
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Coverity (CID 1432373, 1432292, 1432288)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210504100545.112213-1-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In the glib API, the distinction between g_assert() and
g_assert_true() is that the former is for "bug, terminate the
application" and the latter is for "test check, on failure either
terminate or just mark the testcase as failed". For QEMU, g_assert()
is always fatal, so code can assume that if the assertion fails
execution does not proceed, but this is not true of g_assert_true().
In npcm7xx_pwm-test, the pwm_index() and pwm_module_index() functions
include some assertions that are just guarding against possible bugs
in the test code that might lead us to out-of-bounds array accesses.
These should use g_assert() because they aren't part of what the test
is testing and the code does not correctly handle the case where the
condition was false.
This fixes some Coverity issues where Coverity knows that
g_assert_true() can continue when the condition is false and
complains about the possible array overrun at various callsites.
Fixes: Coverity CID 1442340, 1442341, 1442343, 1442344, 1442345, 1442346
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20210505135516.21097-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Coverity notes that when calculating the 64-bit iso_size value in
ahci_test_cdrom() we actually only do it with 32-bit arithmetic.
This doesn't matter for the current test code because nsectors is
always small; but adding the cast avoids the coverity complaints.
Fixes: Coverity CID 1432343
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20210506194358.3925-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some downstreams rename the QEMU binary to "qemu-kvm". This breaks
qtest_get_arch(), which attempts to parse the target architecture from
the QTEST_QEMU_BINARY environment variable.
Print an error instead of returning the architecture "kvm". Things fail
in weird ways when the architecture string is bogus.
Arguably qtests should always be run in a build directory instead of
against an installed QEMU. In any case, printing a clear error when this
happens is helpful.
Since this is an error that is triggered by the user and not a test
failure, use exit(1) instead of abort(). Change the existing abort()
call in qtest_get_arch() to exit(1) too for the same reason and to be
consistent.
Reported-by: Qin Wang <qinwang@rehdat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210412143050.725918-1-stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210412143437.727560-2-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----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=aCeG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging
Trivial patches pull request 20210503
# gpg: Signature made Mon 03 May 2021 09:34:56 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits)
hw/rx/rx-gdbsim: Do not accept invalid memory size
docs: More precisely describe memory-backend-*::id's user
scripts: fix generation update-binfmts templates
docs/system: Document the removal of "compat" property for POWER CPUs
mc146818rtc: put it into the 'misc' category
Do not include exec/address-spaces.h if it's not really necessary
Do not include cpu.h if it's not really necessary
Do not include hw/boards.h if it's not really necessary
Do not include sysemu/sysemu.h if it's not really necessary
hw: Do not include qemu/log.h if it is not necessary
hw: Do not include hw/irq.h if it is not necessary
hw: Do not include hw/sysbus.h if it is not necessary
hw: Remove superfluous includes of hw/hw.h
ui: Fix memory leak in qemu_xkeymap_mapping_table()
hw/usb: Constify VMStateDescription
hw/display/qxl: Constify VMStateDescription
hw/arm: Constify VMStateDescription
vmstate: Constify some VMStateDescriptions
Fix typo in CFI build documentation
hw/pcmcia: Do not register PCMCIA type if not required
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including sysemu/sysemu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-2-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The m25p80 test depends on the Aspeed SMC controller to test our
SPI-NOR flash support. Reflect this dependency by changing the name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210407171637.777743-17-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This adds a test for the Aspeed Hash and Crypto (HACE) engine. It tests
the currently implemented behavior of the hash functionality.
The tests are similar, but are cut/pasted instead of broken out into a
common function so the assert machinery produces useful output when a
test fails.
Co-developed-by: Cédric Le Goater <clg@kaod.org>
Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210409000253.1475587-4-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the autogenerated fuzzer test cases as the basis for a set of am53c974
regression tests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-13-mark.cave-ayland@ilande.co.uk>
Several issues has been reported for query-netdev series. Consider
it's late in the rc, this reverts commit
3c3b656885.
Signed-off-by: Jason Wang <jasowang@redhat.com>
After introducing non-scalar machine properties, it would be preferrable
to have a single acpitable property which includes both generic
information (such as the OEM ids) and custom tables currently
passed via -acpitable.
Do not saddle ourselves with legacy oem-id and oem-table-id
properties, instead mark them as experimental.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210402082128.13854-1-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function flatview_for_each_range() calls a callback for each
range in a FlatView. Currently the callback gets the start and
length of the range and the MemoryRegion involved, but not the offset
within the MemoryRegion. Add this to the callback's arguments; we're
going to want it for a new use in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210318174823.18066-4-peter.maydell@linaro.org
The return value of the flatview_cb callback passed to the
flatview_for_each_range() function is zero if the iteration through
the ranges should continue, or non-zero to break out of it. Use a
bool for this rather than int.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210318174823.18066-2-peter.maydell@linaro.org
Clean up the writes to the configuration space and the PM region, and
rename the test to lpc-ich9-test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-fuzz-i386-target-generic-fuzz-sdhci-v3 uses -drive=sd where it
should use -drive if=none instead. This prints a deprecation warning:
$ ./build-oss-fuzz/DEST_DIR/qemu-fuzz-i386-target-generic-fuzz-sdhci-v3 -runs=1 -seed=1
[ASan warnings snipped...]
--> i386: -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive: warning: bogus if=sd is deprecated, use if=none
INFO: Seed: 1
[More normal output snipped...]
Support for this usage will be gone soon. Adjust the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210319132008.1830950-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The 'props' option has been deprecated in 5.0 in favour of a flattened
object-add command. Time to change our test cases to drop the deprecated
option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The newer 'query-cpus-fast' command avoids side effects on the guest
execution. Note that some of the field names are different in the
'query-cpus-fast' command.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The generic-fuzzer often provides randomized DMA addresses to
virtual-devices. For a 64-bit address-space, the chance of these
randomized addresses coinciding with RAM regions, is fairly small. Even
though the fuzzer's instrumentation eventually finds valid addresses,
this can take some-time, and slows-down fuzzing progress (especially,
when multiple DMA buffers are involved). To work around this, create
"fake" sparse-memory that spans all of the 64-bit address-space. Adjust
the DMA call-back to populate this sparse memory, correspondingly
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I noticed that with a sufficiently small timeout, the fuzzer fork-server
sometimes locks up. On closer inspection, the issue appeared to be
caused by entering our SIGALRM handler, while libfuzzer is in it's crash
handlers. Because libfuzzer relies on pipe communication with an
external child process to print out stack-traces, we shouldn't exit
early, and leave an orphan child. Check for children in the SIGALRM
handler to avoid this issue.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The device-type names for the pro100 network cards, are i8255.. We were
matching "eepro", which catches the PCI PIO/MMIO regions for those
devices, however misses the actual PCI device, which we use to map the
BARs, before fuzzing. Fix that
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the virtio-scsi device,
restrict it to its availability.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test fails when QEMU is built without the megasas device,
restrict it to its availability.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A simply qtest that checks for correct number of netdevs in the response
of the query-netdev.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch adds testing of PWM fan RPMs in the existing npcm7xx pwm
test. It tests whether the MFT module can measure correct fan values
for a PWM fan in NPCM7XX boards.
Reviewed-by: Doug Evans <dje@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210311180855.149764-6-wuhaotsh@google.com
[PMM: fixed format strings for printing uint64_t]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
-----BEGIN PGP SIGNATURE-----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=Qu2a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210310' into staging
target-arm queue:
* Add new mps3-an547 board
* target/arm: Restrict v7A TCG cpus to TCG accel
* Implement a Xilinx CSU DMA model
* hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
# gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits)
hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()
hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_
hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips
hw/ssi: xilinx_spips: Clean up coding convention issues
hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI
hw/arm: xlnx-zynqmp: Clean up coding convention issues
hw/dma: Implement a Xilinx CSU DMA model
target/arm: Restrict v7A TCG cpus to TCG accel
tests/qtest/sse-timer-test: Test counter scaling changes
tests/qtest/sse-timer-test: Test the system timer
tests/qtest/sse-timer-test: Add simple test of the SSE counter
docs/system/arm/mps2.rst: Document the new mps3-an547 board
hw/arm/mps2-tz: Add new mps3-an547 board
hw/arm/mps2-tz: Make initsvtor0 setting board-specific
hw/arm/mps2-tz: Support running APB peripherals on different clock
hw/misc/mps2-scc: Implement changes for AN547
hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register
hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate
hw/arm/mps2-tz: Make UART overflow IRQ board-specific
hw/arm/armsse: Add SSE-300 support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These flags cause the output to look strange for 'make check', and
they aren't needed to reproduce bugs, if they reappear.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216181316.794276-1-alxndr@bu.edu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Change documentation style and fix minor typos in tests/qtest/libqos/qgraph.h
to automatically generate sphinx documentation in docs/devel/qgraph.rst
The mechanism explanation that once was in qgraph.h is now moved to qgraph.rst
There is no functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210308073240.6363-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test that when we change the scaling of the system counter that the
system timer responds appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a test which tests various parts of the functionality of the
SSE system timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a simple qtest to exercise the new system counter device in the
SSE-300.
We'll add tests of the system timer device here too, so this includes
scaffolding (register definitions, etc) for those.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144617.4782-45-peter.maydell@linaro.org
Add a function to remove previously-added abrt handler functions.
Now that a symmetric pair of add/remove functions exists we can also
balance the SIGABRT handler installation. The signal handler was
installed each time qtest_add_abrt_handler() was called. Now it is
installed when the abrt handler list becomes non-empty and removed again
when the list becomes empty.
The qtest_remove_abrt_handler() function will be used by
vhost-user-blk-test.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210223144653.811468-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests that manage multiple processes may wish to kill QEMU before
destroying the QTestState. Expose a function to do that.
The vhost-user-blk-test testcase will need this.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210223144653.811468-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an API that returns a new UNIX domain socket in the listen state.
The code for this was already there but only used internally in
init_socket().
This new API will be used by vhost-user-blk-test.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210223144653.811468-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adjust the timeouts for the benchmarks (Meson 0.57 allows 0 to mean
infinite) and for the longest running tests. These are the
times that I measured and the corresponding timeouts. For generic
qtests, the target that reported the longest runtime is included.
unit tests:
test-crypto-tlscredsx509 13.15s 45s
test-crypto-tlssession 14.12s 45s
qtests:
qos-test 21.26s 60s (i386)
ahci-test 22.18s 60s
pxe-test 26.51s 60s
boot-serial-test 28.02s 60s (sparc)
prom-env-test 28.86s 60s
bios-tables-test 50.17s 120s (aarch64)
test-hmp 57.15s 120s (aarch64)
npcm7xx_pwm-test 71.27s 150s
migration-test 97.09s 150s (aarch64)
qom-test 139.20s 240s (aarch64)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
/+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
=UBVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The preferred syntax is to use "foo=on|off", rather than a bare
"+foo" or "-foo"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-11-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
update golden master acpi tables and empty
bios-tables-test-allowed-diff.h.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <de5a7f88563d39ed0cec34ff1d4cd6a1bdc927f0.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <5ef9a81e49793afb42ffd19bbf1f44e269c65e93.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <22f774a51255af1608b07b00b257af426adcf4ab.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following tests will modify acpi tables.
prepare qtests to allow acpi table change.
add new tables for new tests.
- tests/data/acpi/pc/DSDT.nohpet
- tests/data/acpi/pc/FACP.nosmm
- tests/data/acpi/q35/DSDT.nohpet
- tests/data/acpi/q35/FACP.nosmm
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <c8285f54deab362ed839d31f0fb5bb590ab71fdd.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1612490205-48788-2-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The s390-ccw bios code panics if it can not boot successfully. In
this case, it does not make sense that we wait the full 600 seconds
for the boot sector test to finish and can signal the failure
immediately, thus let's check the status of the guest with the
"query-status" QMP command here, too.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210212113141.854871-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using KVM, using a specific cpu type will only work if the
host CPU really is that exact CPU type.
During testing we can simply use the 'max' CPU which will select
all the features available from the host.
This allow running this test on a Cavium CN8890 (ThunderX cores).
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210205144345.2068758-4-f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If qtests are run in verbose mode (i.e. if --verbose CL argument
was provided) then print the assembled qemu command line for each
test.
Use qos_printf() instead of g_test_message() to avoid the latter
cluttering the output.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <110bef3595cb841dfa1b86733c174ac9774eb37e.1611704181.git.qemu_oss@crudebyte.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If qtests are run in verbose mode (i.e. if --verbose CL argument
was provided) then print all environment variables to stdout
before running the individual tests.
It is common nowadays, at least being able to output all config
vectors in a build chain, especially if it is required to
investigate build- and test-issues on foreign/remote machines,
which includes environment variables. In the context of writing
new test cases this is also useful for finding out whether there
are already some existing options for common questions like is
there a preferred location for writing test files to? Is there
a maximum size for test data? Is there a deadline for running
tests?
Use qos_printf() instead of g_test_message() to avoid the latter
cluttering the output.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <21d77b33c578d80b5bba1068e61fd3562958b3c2.1611704181.git.qemu_oss@crudebyte.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If qtests were run in verbose mode (i.e. if --verbose CL argument was
provided) then dump the generated qos graph (all nodes and edges,
along with their current individual availability status) to stdout,
which allows to identify problems in the created qos graph e.g. when
writing new qos tests.
See API doc comment on function qos_dump_graph() for details.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <6bffb6e38589fb2c06a2c1b5deed33f3e710fed1.1611704181.git.qemu_oss@crudebyte.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These two are macros wrapping regular printf() call. They are intended
to be used instead of calling printf() directly in order to avoid
breaking TAP output format.
TAP output format is enabled by using --tap command line argument.
Starting with glib 2.62 it is enabled by default.
Unfortunately there is currently no public glib API available to check
whether TAP output format is enabled. For that reason qos_printf()
simply always prepends a '#' character for now.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <653a5ef61c5e7d160e4d6294e542c57ea324cee4.1611704181.git.qemu_oss@crudebyte.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far the qos subsystem of the qtest framework had the limitation
that only one instance of the same official QEMU (QMP) driver name
could be created for qtests. That's because a) the created qos
node names must always be unique, b) the node name must match the
official QEMU driver name being instantiated and c) all nodes are
in a global space shared by all tests.
This patch removes this limitation by introducing a new function
qos_node_create_driver_named() which allows test case authors to
specify a node name being different from the actual associated
QEMU driver name. It fills the new 'qemu_name' field of
QOSGraphNode for that purpose.
Adjust build_driver_cmd_line() and qos_graph_node_set_availability()
to correctly deal with either accessing node name vs. node's
qemu_name correctly.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <3be962ff38f3396f8040deaa5ffdab525c4e0b16.1611704181.git.qemu_oss@crudebyte.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements the FIFO mode of the SMBus module. In FIFO, the
user transmits or receives at most 16 bytes at a time. The FIFO mode
allows the module to transmit large amount of data faster than single
byte mode.
Since we only added the device in a patch that is only a few commits
away in the same patch set. We do not increase the VMstate version
number in this special case.
Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20210210220426.3577804-6-wuhaotsh@google.com
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a QTest for NPCM7XX SMBus's single byte mode. It sends a
byte to a device in the evaluation board, and verify the retrieved value
is equivalent to the sent value.
Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210210220426.3577804-5-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio-9p devices are often used to expose a virtual-filesystem to the
guest. There have been some bugs reported in this device, such as
CVE-2018-19364, and CVE-2021-20181. We should fuzz this device
This patch adds two virtio-9p configurations:
* One with the widely used -fsdev local driver. This driver leaks some
state in the form of files/directories created in the shared dir.
* One with the synth driver. While it is not used in the real world, this
driver won't leak leak state between fuzz inputs.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210117230924.449676-4-alxndr@bu.edu>
For some device configurations, it is useful to configure some
resources, and adjust QEMU arguments at runtime, prior to fuzzing. This
patch adds an "argfunc" to generic the generic_fuzz_config. When
specified, it is responsible for configuring the resources and returning
a string containing the corresponding QEMU arguments. This can be useful
for targets that rely on e.g.:
* a temporary qcow2 image
* a temporary directory
* an unused TCP port used to bind the VNC server
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210117230924.449676-2-alxndr@bu.edu>
This is useful for building reproducers. Instead checking the code or
the QEMU_FUZZ_ARGS, the arguments are at the top of the crash log.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210117201014.271610-3-alxndr@bu.edu>
Disks work differently depending on the x86 machine type (SATA vs PATA).
Additionally, we should fuzz the atapi code paths, which might contain
vulnerabilities such as CVE-2020-29443. This patch adds hard-disk and
cdrom generic-fuzzer configs for both the pc (PATA) and q35 (SATA)
machine types.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210120152211.109782-1-alxndr@bu.edu>
