ICH9 is a south bridge which doesn't necessarily depend on x86, so move
it into the southbridge folder, analoguous to PIIX.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-13-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We are facing the issues that some test logs in the gitlab CI are
too big (and thus cut off). The rtl8139-test is one of the few qtests
that prints many lines of output by default when running with V=1, so
it contributes to this problem. Almost all other qtests are silent
with V=1 and only print debug messages with V=2 and higher. Thus let's
change the rtl8139-test to behave more like the other tests and only
print the debug messages with V=2 (or higher).
Message-Id: <20230215124122.72037-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJj7xKYAAoJEO8Ells5jWIRDZQH/Rao24sq3j97qE5RzekvANzq
GnHUyLnl3yeOSNumv2BJInZTvgUpYL2etGQr3DtGRwOrr7w1vKB3zhY3V3jQefkh
f4rsEGkamL/qM2N2cGUIUSqevo7OGnP8aQojpEi4MWWZ30B3L6jqd4NqyA1gyndV
1eBkpR+BY2PjcLbgvFUZEXeAn/vapE5NKULXUGhg5mMvgwYH3CgZXpqqkxr876za
S4rZMtReXKNeid14Z35SUjJdV2WKYmo/lN9+GQxF2YNLmDC3RtuFQVm038erSqvs
uLVSg8tiIlCyOcSDpR/BARNrxVwzlJp5X6ocapHubS/i0Rp/Zo7ezSk/XWH1gfU=
=UbzF
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJj7xKYAAoJEO8Ells5jWIRDZQH/Rao24sq3j97qE5RzekvANzq
# GnHUyLnl3yeOSNumv2BJInZTvgUpYL2etGQr3DtGRwOrr7w1vKB3zhY3V3jQefkh
# f4rsEGkamL/qM2N2cGUIUSqevo7OGnP8aQojpEi4MWWZ30B3L6jqd4NqyA1gyndV
# 1eBkpR+BY2PjcLbgvFUZEXeAn/vapE5NKULXUGhg5mMvgwYH3CgZXpqqkxr876za
# S4rZMtReXKNeid14Z35SUjJdV2WKYmo/lN9+GQxF2YNLmDC3RtuFQVm038erSqvs
# uLVSg8tiIlCyOcSDpR/BARNrxVwzlJp5X6ocapHubS/i0Rp/Zo7ezSk/XWH1gfU=
# =UbzF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 05:37:28 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
vdpa: fix VHOST_BACKEND_F_IOTLB_ASID flag check
net: stream: add a new option to automatically reconnect
vmnet: stop recieving events when VM is stopped
net: Increase L2TPv3 buffer to fit jumboframes
hw/net/vmxnet3: allow VMXNET3_MAX_MTU itself as a value
hw/net/lan9118: log [read|write]b when mode_16bit is enabled rather than abort
net: Replace "Supported NIC models" with "Available NIC models"
net: Restore printing of the help text with "-nic help"
net: Move the code to collect available NIC models to a separate function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now the fuzzers will reboot the guest between inputs.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmPu/LoACgkQTmYd3lg6
lk6RHg/7BRGI5ZPXb1MmTNCC+SroQ6TT++lO4b0hbkN2HO6U+WVvfuA6+0wg+8qC
4bp+G1Tabpcq1MTYUuim6DBtWswgpqr0AbWNwn1eF7hya+3W9woH2POVYY2wwc7m
S3EdwXCCKo9gGXlaNrotnbwIk+o8B4BzXOXLIlRtg26wGYhT5fkJA/BQcHKDXz37
ctyWxlyjIM8pNCgfybMvjC7MYtp8DufPsv/rrKx9t0TM7f1jPVgXLek7t0+ZwjeY
qz2Om2jiij1INgK9hTieWs4eHwpwre6vH2a+JKRkZ3sS7WYcj1auNKVJb3GvDqmc
wy+Nz5Lz4+aPP19pkCYjfz5w3CqEEsSlSDn5UVRbfl2fbENSceoNwo9huMXsF1pB
oO6NK2NxbOygmNpYxp+JEt45KFIXzUcIFQwbn8aCDODIl+0H2yu7/ll6XgELf1Pa
P83THOaVxIxfcI9VOdt/FwDq1ZzmV5nk/BkIGJeIWNYMbU4Gze6YoaL3U8AHDxKH
f6f3qDzcVJjqD0wKhvYcQ3kSPq+vHc/ioh6mYwos6VUEVYz/SLOY876MaSB/K4PE
ofBV7y6HvJ6AMwg1TBg4YtOP08gWK+4sYH+I09oU40U3UcwEpkbkQTF72lPQHxFs
8UVRJrgWv/xzrwzXTX5ruQ633F8zuhqQTeERqksj1pPHJ3NdHps=
=F6qI
-----END PGP SIGNATURE-----
Merge tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu into staging
Replace fork-based fuzzing with reboots.
Now the fuzzers will reboot the guest between inputs.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmPu/LoACgkQTmYd3lg6
# lk6RHg/7BRGI5ZPXb1MmTNCC+SroQ6TT++lO4b0hbkN2HO6U+WVvfuA6+0wg+8qC
# 4bp+G1Tabpcq1MTYUuim6DBtWswgpqr0AbWNwn1eF7hya+3W9woH2POVYY2wwc7m
# S3EdwXCCKo9gGXlaNrotnbwIk+o8B4BzXOXLIlRtg26wGYhT5fkJA/BQcHKDXz37
# ctyWxlyjIM8pNCgfybMvjC7MYtp8DufPsv/rrKx9t0TM7f1jPVgXLek7t0+ZwjeY
# qz2Om2jiij1INgK9hTieWs4eHwpwre6vH2a+JKRkZ3sS7WYcj1auNKVJb3GvDqmc
# wy+Nz5Lz4+aPP19pkCYjfz5w3CqEEsSlSDn5UVRbfl2fbENSceoNwo9huMXsF1pB
# oO6NK2NxbOygmNpYxp+JEt45KFIXzUcIFQwbn8aCDODIl+0H2yu7/ll6XgELf1Pa
# P83THOaVxIxfcI9VOdt/FwDq1ZzmV5nk/BkIGJeIWNYMbU4Gze6YoaL3U8AHDxKH
# f6f3qDzcVJjqD0wKhvYcQ3kSPq+vHc/ioh6mYwos6VUEVYz/SLOY876MaSB/K4PE
# ofBV7y6HvJ6AMwg1TBg4YtOP08gWK+4sYH+I09oU40U3UcwEpkbkQTF72lPQHxFs
# 8UVRJrgWv/xzrwzXTX5ruQ633F8zuhqQTeERqksj1pPHJ3NdHps=
# =F6qI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 04:04:10 GMT
# gpg: using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E
# gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAD4 E2BF 8713 75D6 3405 17C4 4E66 1DDE 583A 964E
* tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu:
docs/fuzz: remove mentions of fork-based fuzzing
fuzz: remove fork-fuzzing scaffolding
fuzz/i440fx: remove fork-based fuzzer
fuzz/virtio-blk: remove fork-based fuzzer
fuzz/virtio-net: remove fork-based fuzzer
fuzz/virtio-scsi: remove fork-based fuzzer
fuzz/generic-fuzz: add a limit on DMA bytes written
fuzz/generic-fuzz: use reboots instead of forks to reset state
fuzz: add fuzz_reset API
hw/sparse-mem: clear memory on reset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In stream mode, if the server shuts down there is currently
no way to reconnect the client to a new server without removing
the NIC device and the netdev backend (or to reboot).
This patch introduces a reconnect option that specifies a delay
to try to reconnect with the same parameters.
Add a new test in qtest to test the reconnect option and the
connect/disconnect events.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fork-fuzzing provides a few pros, but our implementation prevents us
from using fuzzers other than libFuzzer, and may be causing issues such
as coverage-failure builds on OSS-Fuzz. It is not a great long-term
solution as it depends on internal implementation details of libFuzzer
(which is no longer in active development). Remove it in favor of other
methods of resetting state between inputs.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
As we have repplaced fork-based fuzzing, with reboots - we can no longer
use a timeout+exit() to avoid slow inputs. Libfuzzer has its own timer
that it uses to catch slow inputs, however these timeouts are usually
seconds-minutes long: more than enough to bog-down the fuzzing process.
However, I found that slow inputs often attempt to fill overly large DMA
requests. Thus, we can mitigate most timeouts by setting a cap on the
total number of DMA bytes written by an input.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
As we are converting most fuzzers to rely on reboots to reset state,
introduce an API to make sure reboots are invoked in a consistent
manner.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
These tests set -accel tcg, so restrict them to when TCG is present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
=G3PN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* block/iscsi: fix double-free on BUSY or similar statuses
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
# xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
# vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
# HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
# OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
# BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
# =G3PN
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 12 Feb 2023 16:00:55 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
libqtest: ensure waitpid() is only called once
libqtest: split qtest_spawn_qemu function
target/i386: fix ADOX followed by ADCX
target/i386: Fix C flag for BLSI, BLSMSK, BLSR
target/i386: Fix BEXTR instruction
tests/tcg/i386: Introduce and use reg_t consistently
vl: catch [accel] entry without accelerator
block/iscsi: fix double-free on BUSY or similar statuses
remove unnecessary extern "C" blocks
build: make meson-buildoptions.sh stable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtconsole device might not be present in the QEMU build that is
being tested.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230213210738.9719-5-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we build with --without-default-devices, CONFIG_HPET and
CONFIG_PARALLEL are set to N, which makes the respective devices go
missing from acpi tables.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-13-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not include tests that require devices that are not available in
the QEMU build.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230208194700.11035-10-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We should not mix declarations and statements in QEMU code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-7-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't include tests that require devices not available in the QEMU
binary.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-6-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test depends on the presence of the pcie-root-port device. Add a
build time dependency.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-4-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests are built once for all the targets, so as long as one QEMU
binary is built with CONFIG_LSI_SCSI_PCI=y, this test will
run. However some binaries might not include the device. So check this
again in runtime.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-3-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check if the devices we're trying to add are present in the QEMU
binary. They could have been removed from the build via Kconfig or the
--without-default-devices option.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-2-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The npcm7xx_pwm-test produces a lot of output at V=1, which
means that on our CI tests the log files exceed the gitlab
500KB limit. Suppress the messages about exactly what is
being tested unless at V=2 and above.
This follows the pattern we use with qom-test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230209135047.1753081-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If a test aborts after qtest_wait_qemu() is called, the SIGABRT hooks are
still in place and waitpid() is called again. The second time it is called,
the process does not exist anymore and the system call fails.
Move the s->qemu_pid = -1 assignment to qtest_wait_qemu() to make it
idempotent, and anyway remove the SIGABRT hook as well to avoid that
qtest_check_status() is called twice. Because of the extra call,
qtest_remove_abrt_handler() now has to be made idempotent as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to create a function that allows testing of invalid command
lines, extract the parts of qtest_init_without_qmp_handshake that do
not require any successful set up of sockets.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The netdev-socket test intermittently fails on our s390x CI runner:
633/659 ERROR:../tests/qtest/netdev-socket.c:197:test_stream_unix:
assertion failed (resp == expect): ("st0: index=0,type=stream,connection error\r\n" == "st0: index=0,type=stream,unix:/tmp/netdev-socket.GZUG01/stream_unix\r\n")
ERROR
633/659 qemu:qtest+qtest-xtensa / qtest-xtensa/netdev-socket
ERROR 5.47s killed by signal 6 SIGABRT
This may just be because when the machine is under heavy load
running the CI tests it hits the timeout before the QEMU
under test has started to the point of being able to respond
to HMP queries.
Bump the timeout to 60 seconds to see if the intermittent
goes away.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230207165119.1479132-1-peter.maydell@linaro.org
MSG_PEEK peeks at the channel, The data is treated as unread and
the next read shall still return this data. This support is
currently added only for socket class. Extra parameter 'flags'
is added to io_readv calls to pass extra read flags like MSG_PEEK.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: manish.mishra <manish.mishra@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a helper to create the uffd handle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* Remove the deprecated OTP config of sifive_u
* Add libfdt to some of our CI jobs that were still missing it
* Use __builtin_bswap() everywhere (all compiler versions support it now)
* Deprecate the HAXM accelerator
* Document PCI devices handling on s390x
* Make Audiodev introspectable
* Improve the runtime of some CI jobs
-----BEGIN PGP SIGNATURE-----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=uq7y
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-01-31' of https://gitlab.com/thuth/qemu into staging
* qtest improvements
* Remove the deprecated OTP config of sifive_u
* Add libfdt to some of our CI jobs that were still missing it
* Use __builtin_bswap() everywhere (all compiler versions support it now)
* Deprecate the HAXM accelerator
* Document PCI devices handling on s390x
* Make Audiodev introspectable
* Improve the runtime of some CI jobs
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmPY59YRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXzhxAAmoq2j2sbAf2Vr9tz6Ez2p9oKNYnzUEWb
# NGXdvQMcVFKIdjvSYt5ozLC53OFIzuS74X7oHKbdLvGzez3nMCijZIbzN6vNnvd9
# HNGum4blNwHEfQcY9hr9y30Iurc7CQu6VtwGF+XXdzQZDbPz1Z4AWvtPTLcTbkxa
# PskYJfFvow/oaTHDA/7t+90cxCOixKvQMKXL5ATCtMRGnjlbOAEoPbXUB+yM24mk
# 9qp1L/8h8pvXfeXlFj+KETmu+eE5ETEOQtqc2KhQqqze2+VMKYxSX2H+sNkJBPDP
# En8Mpy+fEdefu8Jcu+M2kMLhf1f3LVf9uARhLZY4/xmOYFg+F3xzwpshnH1bs+Kw
# IzWP84uHjE77jSy/wKvYiCx2hdCDwO0G+zym67D1fPzvjzKzUNprV4OIuRzTWah3
# 6Zli5uuaLrBNjR8SJB1HDmLGKDFgToH9dzfLPtDmW8UPJGkAGcBbPKktLTe5y/4E
# del99NqpTx5SAqMmbSMRPZ/vZ7ITdfB0Av3a0GdO8j7eSPb9BOsoZOVD2/iUzab/
# P0dBuNqMM8fwywVKqcK+0CJ/npWIJvOqqlwSDqhY1A78G/uRuapOqUwsB/LWRFv5
# /1VvHfA2rv4l9o66N5jssS5/D1v5p/UBB6JvlTUvuoJMFTXa9de9XFxYxfkyiaAz
# LJl+Dh+aeWk=
# =uq7y
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 31 Jan 2023 10:05:10 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-31' of https://gitlab.com/thuth/qemu: (27 commits)
gitlab-ci.d/buildtest: Merge the --without-default-* jobs
tests/qtest/display-vga-test: Add proper checks if a device is available
gitlab-ci.d/buildtest: Remove ppc-softmmu from the clang-system job
qapi, audio: Make introspection reflect build configuration more closely
qapi, audio: add query-audiodev command
docs/s390x/pcidevices: document pci devices on s390x
tests/qtest/boot-serial-test: Constify tests[] array
tests/qtest/vnc-display-test: Disable on Darwin
tests/qtest/vnc-display-test: Use the 'none' machine
tests/qtest/vnc-display-test: Suppress build warnings on Windows
tests/tcg: Do not build/run TCG tests if TCG is disabled
docs/about/deprecated: Mark HAXM in QEMU as deprecated
MAINTAINERS: Abort HAXM maintenance
qemu/bswap: Use compiler __builtin_bswap() on NetBSD
qemu/bswap: Use compiler __builtin_bswap() on FreeBSD
qemu/bswap: Use compiler __builtin_bswap() on Haiku
qemu/bswap: Remove <byteswap.h> dependency
qemu/bswap: Replace bswapXXs() by compiler __builtin_bswap()
qemu/bswap: Replace bswapXX() by compiler __builtin_bswap()
tests/docker/dockerfiles: Add libfdt to the i386 and to the riscv64 container
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
display-vga-test currently tries to guess the usable VGA devices
according to the target architecture that is used for the test.
This of course does not work if QEMU has been built with the
"--without-default-devices" configure switch. To fix this, use the
qtest_has_device() function for the decision instead. This way
we can also consolidate most of the test functions into one single
function (that takes a parameter with the device name now), except
for the multihead test that tries to instantiate two devices and
thus is a little bit different.
Message-Id: <20230130104446.1286773-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are facing the issues that our test logs in the gitlab CI are
too big (and thus cut off). The bios-tables-test is one of the few
qtests that prints many lines of output by default when running with
V=1, so it contributes to this problem. Almost all other qtests are
silent with V=1 and only print debug messages with V=2 and higher.
Thus let's change the bios-tables-test to behave more like the
other tests and only print the debug messages with V=2 (or higher).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230118125132.1694469-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-39-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-36-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
previous commit added endpoint devices to bridge testcases,
which exposes extra non-hotpluggable slot in DSDT on bus where
hotplug is not available.
It should look like this (numbers may vary):
+ Device (S28)
+ {
+ Name (_ADR, 0x00050000) // _ADR: Address
+ }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-27-imammedo@redhat.com>
to make sure that they are enumerated or ignored as expected
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-26-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-25-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hotplugged bridges should not be described in DSDT,
while it works on cold boot, some ACPPI PCI code
are invoked during reboot.
This patch will let us catch unexpected AML if hotplug
checks are broken.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
