Reimplement usb-host on top of libusb.
Reasons to do this:
(1) Largely rewritten from scratch, nice opportunity to kill historical
cruft.
(2) Offload usbfs handling to libusb.
(3) Have a single portable code base instead of bsd + linux variants.
(4) Bring usb-host support to any platform supported by libusbx.
For now this goes side-by-side to the existing code. That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively. Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.
Thanks to qdev the old and new code can coexist nicely on linux. Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).
The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Check for port reset first and skip everything else then.
Add sanity checks for PLS updates.
Add PLC notification when entering PLS_U0 state.
This gets host-initiated port resume going on win8.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make gui update rate adaption code in gui_update() actually work.
Sprinkle in a tracepoint so you can see the code at work. Remove
the update rate adaption code in vnc and make vnc simply use the
generic bits instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hardcode depth to 32 bpp. It effectively was that way before because
that is the default surface depth, this just makes it explicit in the
code.
Rename depth to new_depth to make it consistent with the new_width +
new_height names. In theory we can make new_depth changeable (i.e.
allow the guest to fill in -- say -- 16 there). In practice the guests
don't try, the X-Server refuses to start if you ask it to use 16bpp
depth (via DefaultDepth in the Screen section).
Always return the correct rmask+gmask+bmask values for the given
new_depth.
Fix mode setting to also verify at new_depth to make sure we have a
correct DisplaySurface, even if the current video mode happes to be
16bpp (set by vgabios via bochs vbe interface). While being at it
switch over to use qemu_create_displaysurface_from, so the surface is
backed by guest-visible video memory and we save a memcpy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
block: Fix direct use of protocols as driver for bdrv_open()
qcow2: Gather clusters in a looping loop
qcow2: Move cluster gathering to a non-looping loop
qcow2: Allow requests with multiple l2metas
qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
qcow2: Prepare handle_alloc/copied() for byte granularity
qcow2: handle_copied(): Implement non-zero host_offset
qcow2: handle_copied(): Get rid of keep_clusters parameter
qcow2: handle_copied(): Get rid of nb_clusters parameter
qcow2: Factor out handle_copied()
qcow2: Clean up handle_alloc()
qcow2: Finalise interface of handle_alloc()
qcow2: handle_alloc(): Get rid of keep_clusters parameter
qcow2: handle_alloc(): Get rid of nb_clusters parameter
qcow2: Factor out handle_alloc()
qcow2: Decouple cluster allocation from cluster reuse code
qcow2: Change handle_dependency to byte granularity
qcow2: Improve check for overlapping allocations
qcow2: Handle dependencies earlier
qcow2: Remove bogus unlock of s->lock
...
This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in special event such like
live migration, shutdown, suspend, and so on.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Decouple DisplaySurface allocation & deallocation from DisplayState.
Replace dpy_gfx_resize + dpy_gfx_setdata with a dpy_gfx_replace_surface
function.
This handles the graphic hardware emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move global variables into a struct so multiple thread pools can be
supported in the future.
This patch does not change thread-pool.h interfaces. There is still a
global thread pool and it is not yet possible to create/destroy
individual thread pools. Moving the variables into a struct first makes
later patches easier to review.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows to specify multiple directories where qemu should look
for data files. To implement that the behavior of the -L switch is
slightly different now: Instead of replacing the data directory the
path specified will be appended to the data directory list. So when
specifiying -L multiple times all directories specified will be checked,
in the order they are specified on the command line, instead of just the
last one.
Additionally the default paths are always appended to the directory
data list. This allows to specify a incomplete directory (such as the
seabios out/ directory) via -L. Anything not found there will be loaded
from the default paths, so you don't have to create a symlink farm for
all the rom blobs.
For trouble-shooting a tracepoint has been added, logging which blob
has been loaded from which location.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1362739344-8068-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add streams support to the xhci emulation. No secondary streams yet,
only linear stream arays are supported for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new virtio transport that uses channel commands to perform
virtio operations.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide handlers for (most) channel I/O instructions.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Yet another optimization is to extend the mirroring iteration to include more
adjacent dirty blocks. This limits the number of I/O operations and makes
mirroring efficient even with a small granularity. Most of the infrastructure
is already in place; we only need to put a loop around the computation of
the origin and sector count of the iteration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With AIO support in place, we can start copying more than one chunk
in parallel. This patch introduces the required infrastructure for
this: the buffer is split into multiple granularity-sized chunks,
and there is a free list to access them.
Because of copy-on-write, a single operation may already require
multiple chunks to be available on the free list.
In addition, two different iterations on the HBitmap may want to
copy the same cluster. We avoid this by keeping a bitmap of in-flight
I/O operations, and blocking until the previous iteration completes.
This should be a pretty rare occurrence, though; as long as there is
no overlap the next iteration can start before the previous one finishes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is really no change in the behavior of the job here, since
there is still a maximum of one in-flight I/O operation between
the source and the target. However, this patch already introduces
the AIO callbacks (which are unmodified in the next patch)
and some of the logic to count in-flight operations and only
complete the job when there is none.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.
Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
HBitmaps provides an array of bits. The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.
In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level. When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).
Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):
bits 0-57 => word in the last bitmap | bits 58-63 => bit in the word
bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word
So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits. To move down, you shift the index left
similarly, and add the word index within the group. Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.
Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.
When iterating on a bitmap, each bit (on any level) is only visited
once. Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps. Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB. Clean it
up anyway. Size overflow now fails assertions.
Bonus: saves a whole bunch of silly casts.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
virtio-blk-data-plane is a subset implementation of virtio-blk. It only
handles read, write, and flush requests. It does this using a dedicated
thread that executes an epoll(2)-based event loop and processes I/O
using Linux AIO.
This approach performs very well but can be used for raw image files
only. The number of IOPS achieved has been reported to be several times
higher than the existing virtio-blk implementation.
Eventually it should be possible to unify virtio-blk-data-plane with the
main body of QEMU code once the block layer and hardware emulation is
able to run outside the global mutex.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-blk-data-plane cannot access memory using the usual QEMU
functions since it executes outside the global mutex and the memory APIs
are this time are not thread-safe.
This patch introduces a virtqueue module based on the kernel's vhost
vring code. The trick is that we map guest memory ahead of time and
access it cheaply outside the global mutex.
Once the hardware emulation code can execute outside the global mutex it
will be possible to drop this code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a new spice chardev to allow arbitrary communication between the
host and the Spice client via the spice server.
Examples:
This allows the Spice client to have a special port for the qemu
monitor:
... -chardev spiceport,name=org.qemu.monitor,id=monitorport
-mon chardev=monitorport
v2:
- remove support for chardev to chardev linking
- conditionnaly compile with SPICE_SERVER_VERSION
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds tracing / debugging calls to the XICS interrupt controller
implementation used on the pseries machine.
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have separate status and length fields in USBPacket
update the completion tracepoint to log both.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Starting with commit 1c380f9460 dma
transfers can actually fail. This patch makes ehci keep track
of the busmaster bit in pci config space, by setting/clearing the
dma_context pointer. Attempts to dma without context will result
in raising HSE (Host System Error) interrupt and stopping the host
controller.
This patch fixes WinXP not booting with a usb stick attached to ehci.
Root cause is seabios activating ehci so you can boot from the stick,
and WinXP clearing the busmaster bit before resetting the host
controller, leading to ehci actually trying dma while it is disabled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* kraxel/usb.69: (31 commits)
usb-redir: Allow redirecting super speed devices to high speed controllers
usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
usb-redir: Use reject rather the disconnect on bad ep info
usb-redir: Add an usbredir_setup_usb_eps() helper function
usb-redir: Add support for input pipelining
usb-redir: Add support for 32 bits bulk packet length
combined-packet: Add a workaround for Linux usbfs + live migration
usb: Add packet combining functions
uhci: Don't crash on device disconnect
uhci: Add a uhci_handle_td_error() helper function
usb/ehci-pci: add helper to create ich9 usb controllers
usb/ehci-pci: add ich9 00:1a.* variant
usb/ehci-pci: dynamic type generation
uhci: add ich9 00:1a.* variants
uhci: stick irq routing info into UHCIInfo too.
uhci: dynamic type generation
xilinx_zynq: add USB controllers
usb/ehci: add sysbus variant
usb/ehci: split into multiple source files
usb/ehci: Guard definition of EHCI_DEBUG
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a generic thread-pool. The code is roughly based on posix-aio-compat.c,
with some changes, especially the following:
- use QemuSemaphore instead of QemuCond;
- separate the state of the thread from the return code of the worker
function. The return code is totally opaque for the thread pool;
- do not busy wait when doing cancellation.
A more generic threadpool (but still specific to I/O so that in the future
it can use special scheduling classes or PI mutexes) can have many uses:
it allows more flexibility in raw-posix.c and can more easily be extended
to Win32, and it will also be used to do an msync of the persistent bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kraxel/usb.68: (36 commits)
xhci: fix usb name in caps
xhci: make number of interrupters and slots configurable
xhci: allow disabling interrupters
xhci: flush endpoint context unconditinally
xhci: fix function name in error message
uhci: Use only one queue for ctrl endpoints
uhci: Retry to fill the queue while waiting for td completion
uhci: Always mark a queue valid when we encounter it
uhci: When the guest marks a pending td non-active, cancel the queue
uhci: Detect guest td re-use
uhci: Verify queue has not been changed by guest
uhci: Immediately free queues on device disconnect
uhci: Store ep in UHCIQueue
uhci: Make uhci_fill_queue() actually operate on an UHCIQueue
uhci: Add uhci_read_td() helper function
uhci: Rename UHCIAsync->td to UHCIAsync->td_addr
uhci: Move emptying of the queue's asyncs' queue to uhci_queue_free
uhci: Drop unnecessary forward declaration of some static functions
uhci: Don't retry on error
uhci: cleanup: Add an unlink call to uhci_async_cancel()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to the spec a guest can unlink a qh, and then as soon as frindex
has changed by 1 since the unlink, assume it is idle and re-use it. However
for various reasons, we cannot simply consider a qh as unlinked if we've not
seen it for 1 frame. This means that it is possible for a guest to re-use /
restart the queue while we still see its old state. This patch adds a safety
check for this, and "early" retires queues when they were changed by the guest.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background. This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program. It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.
The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.
The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.
In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source. (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).
It is not yet possible to complete the job and switch over to the target
disk. The next patches will fix this and add many refinements to the
basic idea introduced here. These include improved error management,
some tunable knobs and performance optimizations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.
Add a new block job command that manually completes background operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add QMP commands matching the functionality.
Paused jobs cannot be canceled without first resuming them. This
ensures that I/O errors are never missed by management. However, an
optional force argument can be specified to allow that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the live commit coroutine. This iteration focuses on the
commit only below the active layer, and not the active layer itself.
The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base. At the end, intermediate images are deleted, and the
chain stitched together. Images are restored to their original open
flags upon completion.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* 'usb.65' of git://git.kraxel.org/qemu:
uhci: Don't queue up packets after one with the SPD flag set
usb-redir: Revert usb-redir part of commit 93bfef4c
usb-redir: Add chardev open / close debug logging
usb-redir: Add support for migration
usb-redir: Store max_packet_size in endp_data
usb-redir: Add an already_in_flight packet-id queue
usb-redir: Change cancelled packet code into a generic packet-id queue
ehci: Walk async schedule before and after migration
ehci: Don't set seen to 0 when removing unseen queue-heads
configure: usbredir fixes
ehci: Don't process too much frames in 1 timer tick (v2)
ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
ehci: switch to new-style memory ops
usb-host: allow emulated (non-async) control requests without USBPacket
Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.
Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.
The maximal number of monitors is limited on the QXLRom to 64.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add two new trace events:
qxl_send_events(int qid, uint32_t events) "%d %d"
qxl_set_guest_bug(int qid) "%d"
Change qxl_io_unexpected_vga_mode parameters to be equivalent to those
of qxl_io_write for easier grouping under a single systemtap probe.
Change d to qxl in one place.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also register different memory regions for capabilities,
operational registers and port status registers. Create
separate tracepoints for operational regs and port status
regs. Ditch a bunch of sanity checks because the memory
core will do this for us now.
Offloading the byte, word and dword access handling to the
memory core also has the side effect of fixing ehci register
access on bigendian hosts.
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move all state belonging to the (single) interrupter into a separate
struct. First step in adding support for multiple interrupters.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch splits the xhci_xfer_data function into three.
The xhci_xfer_data function used to do does two things:
(1) copy transfer data between guest memory and a temporary buffer.
(2) report transfer results to the guest using events.
Now we three functions to handle this:
(1) xhci_xfer_map creates a scatter list for the transfer and
uses that (instead of the temporary buffer) to build a
USBPacket.
(2) xhci_xfer_unmap undoes the mapping.
(3) xhci_xfer_report sends out events.
The patch also fixes reporting of transaction errors which must be
reported unconditinally, not only in case the guest asks for it
using the ISP flag.
[ v2: fix warning ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
make qemu_queue_{cancel,reset} return the number of packets released,
so the caller can figure whenever there have been active packets even
though there shouldn't have been any. Add tracepoint to log this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.
[ kraxel: 3 continues to be the default revision. Once we have a new
stable spice-server release and the qemu patches to enable
the new bits merged we'll go flip the switch and make rev4
the default ]
This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.
On migration reissue spice_qxl_monitors_config_async.
RHBZ: 770842
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
fixup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This provides floppy and IDE controllers as well as serial and parallel
ports. However, dynamic configuration of devices is not yet supported.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: QOM'ify, split out header, create CharDriverState if absent]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This patch implements MSI and MSI-X support for the pseries PCI host
bridge. To do this it adds:
* A "config_space_address to msi_table" map, since the MSI RTAS calls
take a PCI config space address as an identifier.
* A MSIX memory region to catch msi_notify()/msix_notiry() from
virtio-pci and pass them to the guest via qemu_irq_pulse().
* RTAS call "ibm,change-msi" which sets up MSI vectors for a
device. Note that this call may configure and return lesser number of
vectors than requested.
* RTAS call "ibm,query-interrupt-source-number" which translates MSI
vector to interrupt controller (XICS) IRQ number.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix error case ndev < 0]
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a trace event in the pseries PCI specific set_irq() function to
assist in debugging.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: add trace.h include]
Signed-off-by: Alexander Graf <agraf@suse.de>
When a device is resized, we will report a unit attention condition
for CAPACITY DATA HAS CHANGED. However, we should ensure that this
condition does not override a more important unit attention condition.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
trace_megasas_dcmd_dump_frame() takes 9 arguments, which is
rather much. Plus the trace infrastructure doesn't support
it. As we can get the information via other means it's pointless
to have it in the driver, so rather use some proper trace
point here and remove the old one.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kwolf/for-anthony: (41 commits)
fdc-test: Clean up a bit
fdc-test: introduce test_relative_seek
fdc: fix relative seek
qemu-iotests: Valgrind support
coroutine-ucontext: Help valgrind understand coroutines
qemu-io: Fix memory leaks
hw/block-common: Factor out fall back to legacy -drive cyls=...
blockdev: Don't limit DriveInfo serial to 20 characters
hw/block-common: Factor out fall back to legacy -drive serial=...
hw/block-common: Move BlockConf & friends from block.h
Relax IDE CHS limits from 16383,16,63 to 65535,16,255
blockdev: Drop redundant CHS validation for if=ide
hd-geometry: Compute BIOS CHS translation in one place
qtest: Test we don't put hard disk info into CMOS for a CD-ROM
ide pc: Put hard disk info into CMOS only for hard disks
block: Geometry and translation hints are now useless, purge them
qtest: Cover qdev property for BIOS CHS translation
ide: qdev property for BIOS CHS translation
qdev: New property type chs-translation
qdev: Collect private helpers in one place
...
Best to use the same type, to avoid unwanted truncation or sign
extension.
BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
$subject says all. First cut.
It's a pure UAS (usb attached scsi) emulation, without BOT (bulk-only
transport) compatibility. If your guest can't handle it use usb-storage
instead.
The emulation works like any other scsi hba emulation (eps, lsi, virtio,
megasas, ...). It provides just the HBA where you can attach scsi
devices as you like using '-device'. A single scsi target with up to
256 luns is supported.
For now only usb 2.0 transport is supported. This will change in the
future though as I plan to use this as playground when codeing up &
testing usb 3.0 transport and streams support in the qemu usb core and
the xhci emulation.
No migration support yet. I'm planning to add usb 3.0 support first as
this probably requires saving additional state.
Special thanks go to Paolo for bringing the qemu scsi emulation into
shape, so this can be added nicely without having to touch a single line
of scsi code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* quintela/migration-anthony-v2:
Maintain the number of dirty pages
dirty bitmap: abstract its use
Exit loop if we have been there too long
Only calculate expected_time for stage 2
Only TCG needs TLB handling
No need to iterate if we already are over the limit
Add tracepoints for savevm section start/end
Add spent time for migration
Add migration_end function
Add debugging infrastructure
Add save_block_hdr function
Add MigrationParams structure
Add missing check for host_from_stream_offset return value for RAM_SAVE_FLAG_PAGE
* kraxel/usb.55:
usb-host: add trace events for iso xfers
usb: fix interface initialization
usb: split endpoint init and reset
usb-redir: Correctly handle the usb_redir_babble usbredir status
ehci: Kick async schedule on wakeup in the non companion case
usb-ehci: Fix an assert whenever isoc transfers are used
ehci: don't flush cache on doorbell rings.
ehci: fix td writeback
ehci: fix ehci_qh_do_overlay
Replace iso transfer fprintf's with trace points. Also rename existing
tracepoints so they all match usb_host_iso_*.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
and QBus changes - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to know how long each section takes to save.
An awk script like this tells us sections that takes more that 10ms
$1 ~ /savevm_state_iterate_end/ {
/* Print savevm_section_end line when > 10ms duration */
if ($2 > 10000) {
printf("%s times_missing=%u\n", $0, times_missing++);
}
}
Signed-off-by: Juan Quintela <quintela@redhat.com>
fix ws tracepoints
Signed-off-by: Juan Quintela <quintela@redhat.com>
Allow certain event types to be rate limited to avoid flooding
monitor clients. The monitor_protocol_event() method is changed
such that instead of immediately emitting the event to Monitor
instances, it will call a new monitor_protocol_event_queue()
method.
This will check to see if the rate limit for the event has been
exceeded, and if so schedule a timer to wakeup at the end of the
rate limit period. If further events arrive before the timer fires,
the previously queued event will be discarded in favour of the new
event. The event will eventually be emitted when the timer fires.
This logic is applied to RTC_CHANGE, BALLOON_CHANGE & WATCHDOG
events, since the data associated with these events is stateless
* monitor.c: Add support for rate limiting
* monitor.h: Define monitor_global_init for one-time setup tasks
* vl.c: Invoke monitor_global_init
* trace-events: Add hooks for monitor event tracing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a separate EHCIPacket struct and move fields over from EHCIQueue.
Preparing for supporting multiple packets per queue being in flight at
the same time. No functional changes yet.
Fix some codestyle issues along the way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
uhci_process_frame() can be invoked multiple times per frame, so
accounting usb bandwith in a local variable doesn't fly, use a variable
in UHCIState instead. Also check the limit more frequently.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows using LUNs bigger than 2TB. Keep using READ10 for other
device types such as MMC.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
The resulting stp file fails to load because of an unresolvable probe.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch carries a complete rewrite of the usb descriptor parser.
Changes / improvements:
* We are using the USBDescriptor struct instead of hard-coded offsets
now to access descriptor data.
* (debug) printfs are all gone, tracepoints have been added instead.
* We don't try (and fail) to skip over unneeded descriptors. We parse
them all one by one. We keep track of which configuration, interface
and altsetting we are looking at and use this information to figure
which desciptors are in use and which we can ignore.
* On parse errors we clear all endpoint information, which will
disallow any communication with the device, except control endpoint
messages. This makes sure we don't end up with a silly device state
where half of the endpoints got enabled and the other half was left
disabled.
* Some sanity checks have been added.
The new parser is more robust and also leaves complete device
information in the trace log if you enable the ush_host_parse_*
tracepoints.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add pointer to USBPacket to all tracepoints tracking requests to make it
easier to identify them when multiple requests are in flight.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
dprint is still used for qxl_init_common one time prints.
also switched parts of spice-display.c over, mainly all the callbacks to
spice server.
All qxl device trace events start with the qxl device id.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new function to check whenever the packet state is as expected,
log more informations in case it isn't.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reorganize usb source files. Create a new hw/usb/ directory and move
all usb source code to that place. Also make filenames a bit more
descriptive. Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-". Fixup paths Makefile and include
paths to make it compile. No code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* kwolf/for-anthony:
test-coroutine: add performance test for nesting
coroutine: adding configure option for sigaltstack coroutine backend
coroutine: adding configure choose mechanism for coroutine backend
coroutine: adding sigaltstack method (.c source)
qcow2: Reduce number of I/O requests
qcow2: Add qcow2_alloc_clusters_at()
qcow2: Factor out count_cow_clusters
qmp: convert blockdev-snapshot-sync to a wrapper around transactions
add mode field to blockdev-snapshot-sync transaction item
rename blockdev-group-snapshot-sync
qapi: complete implementation of unions
use QSIMPLEQ_FOREACH_SAFE when freeing list elements
Add 'make check-block'
make check: Add qemu-iotests subset
qemu-iotests: Mark some tests as quick
qcow2: Add error messages in qcow2_truncate
block: handle -EBUSY in bdrv_commit_all()
qcow2: Add some tracing
qed: do not evict in-use L2 table cache entries
Group snapshot: Fix format name for backing file
If the first part of a write request is allocated, but the second isn't
and it can be allocated so that the resulting area is contiguous, handle
it at once. This is a common case for sequential writes.
After this patch, alloc_cluster_offset() only checks if the clusters are
already allocated or how many new clusters can be allocated contigouosly.
The actual cluster allocation is split off into a new function
do_alloc_cluster_offset().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Per-request attributes like read/write are currently implemented as bool
fields in the QEDAIOCB struct. This becomes unwiedly as the number of
attributes grows. For example, the qed_aio_setup() function would have
to take multiple bool arguments and at call sites it would be hard to
distinguish the meaning of each bool.
Instead use a flags field with bitmask constants. This will be used
when zero write support is added.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ability to zero regions of an image file is a useful primitive for
higher-level features such as image streaming or zero write detection.
Image formats may support an optimized metadata representation instead
of writing zeroes into the image file. This allows zero writes to be
potentially faster than regular write operations and also preserve
sparseness of the image file.
The .bdrv_co_write_zeroes() interface should be implemented by block
drivers that wish to provide efficient zeroing.
Note that this operation is different from the discard operation, which
may leave the contents of the region indeterminate. That means
discarded blocks are not guaranteed to contain zeroes and may contain
junk data instead.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There already exists a virtio_blk_handle_write trace event as well as
completion events. Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the block_stream command, which starts copy backing file contents
into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes. Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously copy-on-read could only be enabled for all requests to a
block device. This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.
For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image. Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.
Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests. Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-kvm/uq/master:
kvm: Activate in-kernel irqchip support
kvm: x86: Add user space part for in-kernel IOAPIC
kvm: x86: Add user space part for in-kernel i8259
kvm: x86: Add user space part for in-kernel APIC
kvm: x86: Establish IRQ0 override control
kvm: Introduce core services for in-kernel irqchip support
memory: Introduce memory_region_init_reservation
ioapic: Factor out base class for KVM reuse
ioapic: Drop post-load irr initialization
i8259: Factor out base class for KVM reuse
i8259: Completely privatize PicState
apic: Open-code timer save/restore
apic: Factor out base class for KVM reuse
apic: Introduce apic_report_irq_delivered
apic: Inject external NMI events via LINT1
apic: Stop timer on reset
kvm: Move kvmclock into hw/kvm folder
msi: Generalize msix_supported to msi_supported
hyper-v: initialize Hyper-V CPUID leaves.
hyper-v: introduce Hyper-V support infrastructure.
Conflicts:
Makefile.target
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/memory/page_desc: (22 commits)
Remove cpu_get_physical_page_desc()
sparc: avoid cpu_get_physical_page_desc()
virtio-balloon: avoid cpu_get_physical_page_desc()
vhost: avoid cpu_get_physical_page_desc()
kvm: avoid cpu_get_physical_page_desc()
memory: remove CPUPhysMemoryClient
xen: convert to MemoryListener API
memory: temporarily add memory_region_get_ram_addr()
xen, vga: add API for registering the framebuffer
vhost: convert to MemoryListener API
kvm: convert to MemoryListener API
kvm: switch kvm slots to use host virtual address instead of ram_addr_t
memory: add API for observing updates to the physical memory map
memory: replace cpu_physical_sync_dirty_bitmap() with a memory API
framebuffer: drop use of cpu_physical_sync_dirty_bitmap()
loader: remove calls to cpu_get_physical_page_desc()
framebuffer: drop use of cpu_get_physical_page_desc()
memory: introduce memory_region_find()
memory: add memory_region_is_logging()
memory: add memory_region_is_rom()
...
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this patch fix multiple issues with VirtFS tracing.
a) Add tracepoint to the correct code path. We handle error in complete_pdu
b) Fix indentation in python script
c) Fix variable naming issue in python script
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Otherwise, if cancellation is "faked" by the AIO layer and goes
through qemu_aio_flush, the whole request is completed synchronously
during scsi_req_cancel.
Using the enqueued flag would work here, but not in the next patches,
so I'm introducing a new io_canceled flag. That's because scsi_req_data
is a synchronous callback and the enqueued flag might be reset by the
time it returns. scsi-disk cannot unref the request until after calling
scsi_req_data.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This provides built-in support for iSCSI to QEMU.
This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.
This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
git://github.com/sahlberg/libiscsi.git
The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
qemu against libiscsi.
* --enable-libiscsi
Force a build against libiscsi. If libiscsi is not available
the build will fail.
* --disable-libiscsi
Do not link against libiscsi, even if it is available.
When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.
You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This similarly adds support for coroutine and asynchronous discard.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit c572f23a3e added trace events
with mismatching format string and arguments.
gcc reports these errors:
In file included from trace.c:2:0:
trace.h: In function ‘trace_v9fs_attach’:
trace.h:2850:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_wstat’:
trace.h:3039:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir’:
trace.h:3088:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir_return’:
trace.h:3095:9: error: too many arguments for format [-Werror=format-extra-args]
Fix the format strings and also use %u instead of %d for unsigned values
in the changed strings. There are more minor errors of this kind
which I did not fix because that would make the review more difficult.
v2: Fixed position of } for v9fs_mkdir_return.
Cc: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is OpenCores Ethernet MAC + subset of National Semiconductors
DP83838C PHY.
OpenCores Ethernet MAC project: http://opencores.org/project,ethmac
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Plan is to replace the existing debug infrastructure with Qemu tracing
infrastructure so that user can dynamically enable/disable trace events and
therefore a meaningful trace log can be generated which can be further
filtered using an analysis script.
Note: Because of current simpletrace limitations, the trace events are
logging at max 6 args, however, once the more args are supported, we can
change trace events to log more info as well. Also, This initial patch only
provides a replacement for existing debug infra. More trace events to be
added later for newly added handlers and sub-routines.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32:
milkymist: new interrupt map
milkymist_uart: support new core version
lm32: add missing qemu_init_vcpu() call
It is useful to know the BlockDriverState as well as the
sector_num/nb_sectors of an emulated .bdrv_co_*() request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add trace events for handle_qmp_command(), which dispatches qmp
commands, and monitor_protocol_emitter(), which produces the reply to a
qmp command.
Also remove duplicate #include "trace/control.h".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
bdrv_open_common() is a useful point to trace since it reveals the
filename and block driver for a given BlockDriverState.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The virtio device lifecycle can be observed by looking at the sequence
of set status operations. This is especially important for catching the
reset operation (status value 0), which resets the device and all
virtqueues.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that format strings can end in a PRI*64 macro, remove the
workarounds from the trace-events file.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is no need to put a newline in trace event format strings. The
backend may use the format string within some context and takes care of
how to display the event. The stderr backend automatically appends "\n"
whereas the ust backend does not want a newline at all.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch makes qemu assign a port when creating the device, not when
attaching it. For most usb devices this isn't a noticable difference
because they are in attached state all the time.
The change affects usb-host devices which live in detached state while
the real device is unplugged from the host. They have a fixed port
assigned all the time now instead of getting grabbing one on attach and
releasing it at detach, i.e. they stop floating around at the usb bus.
The change also allows to simplify usb-hub. It doesn't need the
handle_attach() callback any more to configure the downstream ports.
This can be done at device initialitation time now. The changed
initialization order (first grab upstream port, then register downstream
ports) also fixes some icky corner cases. For example it is not possible
any more to plug the hub into one of its own downstream ports.
The usb host adapters must care too. USBPort->dev being non-NULL
doesn't imply any more the device is in attached state. The host
adapters must additionally check the USBPort->dev->attached flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds code to do minimal siTD handling, which is basically
just following the next pointer. This is good enougth to handle the
inactive siTDs used by FreeBSD. Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When configured to pass through a specific host port (using hostbus and
hostport properties), try to claim the port if supported by the kernel.
That will avoid any kernel drivers binding to devices plugged into that
port. It will not stop any userspace apps (such as usb_modeswitch)
access the device via usbfs though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a bunch of trace points to usb-linux.c Drop a bunch of DPRINTK's in
favor of the trace points. Also cleanup error reporting a bit while being
at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Given that all events with programmatically-controlled state are disabled by
default, we can delete the "disable" property from all events.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Note that this refers to the backend-specific state (whether the output must be
generated), not the event "disabled" property (which always uses the "nop"
backend).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Polarity of external interrupts needs to be handled in the IOAPIC.
Passing it to the APIC is pointless. So remove all these arguments.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Can be useful when debugging the device scan phase.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this patch, sense data is stored in the generic data structures
for SCSI devices and requests. The SCSI layer takes care of storing
sense data in the SCSIDevice for the subsequent REQUEST SENSE command.
At the same time, get_sense is removed and scsi_req_get_sense can use
an entirely generic implementation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to be able to call bdrv_co_readv/writev for drivers that don't
implement the functions natively, add an emulation that uses the AIO functions
to implement them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new block driver callbacks bdrv_co_readv/writev, which work on a
QEMUIOVector like bdrv_aio_*, but don't need a callback. The function may only
be called inside a coroutine, so a block driver implementing this interface can
yield instead of blocking during I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Asynchronous code is becoming very complex. At the same time
synchronous code is growing because it is convenient to write.
Sometimes duplicate code paths are even added, one synchronous and the
other asynchronous. This patch introduces coroutines which allow code
that looks synchronous but is asynchronous under the covers.
A coroutine has its own stack and is therefore able to preserve state
across blocking operations, which traditionally require callback
functions and manual marshalling of parameters.
Creating and starting a coroutine is easy:
coroutine = qemu_coroutine_create(my_coroutine);
qemu_coroutine_enter(coroutine, my_data);
The coroutine then executes until it returns or yields:
void coroutine_fn my_coroutine(void *opaque) {
MyData *my_data = opaque;
/* do some work */
qemu_coroutine_yield();
/* do some more work */
}
Yielding switches control back to the caller of qemu_coroutine_enter().
This is typically used to switch back to the main thread's event loop
after issuing an asynchronous I/O request. The request callback will
then invoke qemu_coroutine_enter() once more to switch back to the
coroutine.
Note that if coroutines are used only from threads which hold the global
mutex they will never execute concurrently. This makes programming with
coroutines easier than with threads. Race conditions cannot occur since
only one coroutine may be active at any time. Other coroutines can only
run across yield.
This coroutines implementation is based on the gtk-vnc implementation
written by Anthony Liguori <anthony@codemonkey.ws> but it has been
significantly rewritten by Kevin Wolf <kwolf@redhat.com> to use
setjmp()/longjmp() instead of the more expensive swapcontext() and by
Paolo Bonzini <pbonzini@redhat.com> for Windows Fibers support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
"next" is reserved in systemtap thus using this as a
trace parameter name causes trouble when trying to trace
with systemtap.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The map cache is a Xen thing, so its API should make this clear.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests. The device is necessary for PV on HVM drivers to work.
Signed-off-by: Steven Smith <ssmith@xensource.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch introduces phys memory client for Xen.
Only sync dirty_bitmap and set_memory are actually implemented.
migration_log will stay empty for the moment.
Xen can only log one range for bit change, so only the range in the
first call will be synced.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch fixes a bunch of issues in the itd descriptor handling.
Most important fix is to handle transfers which cross page borders
correctly by looking up the address of the next page. Luckily the
linux uses physically contigous memory so the data used to hits the
correct location even with this bug instead of corrupting guest
memory. Also the transfer length updates for outgoing transfers wasn't
correct.
While being at it DPRINTFs have been replaced by tracepoints.
The isoch_pause logic has been disabled. Not clear to me which propose
this serves and I think it is incorrect too as we just skip processing
itds. Even when no xfer happens we have to clear the active bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for keeping multiple queues going at the same
time. One slow device will not affect other devices any more.
The patch adds code to manage EHCIQueue structs. It also does a number
of changes to the state machine:
* The state machine will never ever stop in EXECUTING any more.
Instead it will continue with the next queue (aka HORIZONTALQH) when
the usb device returns USB_RET_ASYNC.
* The state machine will stop processing when it figures it walks in
circles (easy to figure now that we have a EHCIQueue struct for each
QH we've processed). The bailout logic should not be needed any
more. For now it is still in, but will assert() in case it triggers.
* The state machine will just skip queues with a async USBPacket in
flight.
* The state machine will resume processing as soon as the async
USBPacket is finished.
The patch also takes care to flush the QH struct back to guest memory
when needed, so we don't get stale data when (re-)loading it from guest
memory in FETCHQH state.
It also makes the writeback code to not touch the first three dwords of
the QH struct as the EHCI must not write them. This actually fixes a
bug where QH chaining changes (next ptr) by the linux ehci driver where
overwritten by the emulated EHCI.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a separate tracepoint to log how register values change in response
to a mmio write. Especially useful for registers which have read-only
or clear-on-write bits in them.
No change in behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Trace usb port operations (attach, detach, reset),
drop a few obsolete DPRINTF's.
No change in behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add functions to get and set the current state of the state machine,
add tracepoints there to trace state transitions. Add support for
traceing the queue heads and transfer descriptors as we look at them.
Drop a few DPRINTFs and all DPRINTF_ST lines, they are obsolete now.
No change in behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch starts adding trace support to ehci. It traces
updates of the status register (USBSTS), mmio access and
controller reset.
It also adds functions to set and clear status register bits
and puts them in use everywhere.
Some DPRINTF's are dropped in favor of the new tracepoints.
No change in behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The simple backend only supports a maximum of 6 arguments. Split the
scsi_req_parsed event in two parts to cope with the limit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This abstracts calling the command_complete callback, reducing churn
in the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
One strategy to limit the startup delay of consistency check when
opening image files is to ensure that the file is marked dirty for as
little time as possible.
QED currently marks the image dirty when the first allocating write
request is issued and clears the dirty bit again when the image is
cleanly closed. In practice that means the image is marked dirty for
most of a guest's lifetime and prone to being in a dirty state upon
crash or power failure.
It is safe to clear the dirty bit after all allocating write requests
have completed and a flush has been performed. This patch adds a timer
after the last allocating write request completes. When the timer fires
it will flush and then clear the dirty bit. The timer is set to 5
seconds and is cancelled upon arrival of a new allocating write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After
a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when
used with Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Trace events cannot use %s in their format strings because trace
backends vary in how they can deference pointers (if at all). Recording
const char * values is not meaningful if their contents are not recorded
too.
Change grlib trace events that rely on strings so that they communicate
similar information without using strings.
A follow-up patch explains this limitation and updates docs/tracing.txt.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It can be handy to know when the guest locks/unlocks the CD-ROM tray.
This trace event makes that possible.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's simple UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's System Controller core. The model
has the following features:
- support for shutting down and restarting the board
- provide two timers and GPIO
- provide registers for system identification and reading the boards
capabilities
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's Programmable FPU.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's minimal Ethernet MAC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's memory card core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds paio_complete() and paio_cancel() trace events to
complement the paio_submit() event.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add a trace event for bdrv_aio_flush() to complement the existing
bdrv_aio_readv() and bdrv_aio_writev() events.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch add support for the LatticeMico32 UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the LatticeMico32 system timer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the interrupt controller of the lm32. Because the PIC is
accessed through special control registers and opcodes, there are callbacks
from the lm32 translation code to this model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more
information on http://www.gaisler.com).
Leon3 is made of multiple components available in the GrLib VHDL library.
Three devices are implemented: uart, timers and IRQ manager.
You can find code for these peripherals in the grlib_* files.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This device exposes one parameter:
- chardev (ptr) : Pointer to a qemu character device
Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdf
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This device exposes two parameters:
- set_pil_in (ptr) : A function to set the pil_in of the SPARC CPU
- set_pil_in_opaque (ptr) : Opaque argument of the set_pil_in function
Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdf
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This device exposes three parameters:
- frequency (uint32) : The system frequency
- irq-line (uint32) : IRQ line number for the first timer
(others use irq-line + 1, irq-line + 2...)
- nr-timers (uint32) : Number of timers
Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdf
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.
Example usage:
qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
-device virtserialport,chardev=vdagent,name=com.redhat.spice.0
v4->v5:
* add tracing events
* fix missing comma
* fix help string to show debug is optional
v3->v4:
* updated commit message
v1->v3 changes: (v2 had a wrong commit message)
* removed spice-qemu-char.h, folded into ui/qemu-spice.h
* removed dead IOCTL code
* removed comment
* removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for device_qualifier and other_speed_config descriptors.
These are used to query the "other speed" configuration of usb 2.0
devices, i.e. in high-speed mode they return the full-speed
configuration and visa versa.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch moves setting and clearing the remote_wakeup feature
bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also
USB_REQ_GET_STATUS handling is moved to common code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds fields to the USBDevice struct for the current
speed (hard-wired to full speed for now) and current device
configuration. Also a init function is added which inializes
these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION
handling to be moved to common code.
For most drivers the conversion is trivial ad they support a single
configuration only anyway. One exception is bluetooth where some
device-specific setup code runs after get/set configuration. The
other is usb-net which actually has two configurations so the
the code to check for the active configuration has been adapted.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds hw/usb-desc.[ch] files. They carry data structures
for various usb descriptors and helper functions to generate usb
packets from the structures.
The intention is to have a internal representation of the device
desription which is more usable than the current char array blobs,
so we can have common code handle common usb device emulation using
the device description.
The usage of this infrastructure is optional for usb drivers as there
are cases such as pass-through where it probably isn't very useful.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch implements the read/write state machine. Operations are
fully asynchronous and multiple operations may be active at any time.
Allocating writes lock tables to ensure metadata updates do not
interfere with each other. If two allocating writes need to update the
same L2 table they will run sequentially. If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables. The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).
With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VM state change notifications are invoked from vm_start()/vm_stop().
Trace these state changes so we can reason about the state of the VM
from trace output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace debug printf statements with tracepoints.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Observing block layer aio readv/writev operations is useful for
debugging image formats or understanding guest disk I/O patterns.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It is not portable to use "%ld" for int64_t because int64_t may have
type long on 64-bit platforms and long long on 32-bit platforms. Use
the standard library PRId64 macros to keep format strings portable.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds trace events for virtqueue operations including
adding/removing buffers, notifying the guest, and receiving a notify
from the guest.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It is often useful to instrument memory management functions in order to
find leaks or performance problems. This patch adds trace events for
the memory allocation primitives.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Sometimes it is useful to disable a trace event. Removing the event
from trace-events is not enough since source code will call the
trace_*() function for the event.
This patch makes it easy to build without specific trace events by
marking them disabled in trace-events:
disable multiwrite_cb(void *mcb, int ret) "mcb %p ret %d"
This builds without the multiwrite_cb trace event.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Allow bulk enabling/disabling of trace events at compile time
For 'simple' trace backend, allow bulk enabling/disabling of trace
events at compile time. Trace events that are preceded by 'disable'
keyword are compiled in, but turned off by default. These can
individually be turned on using the monitor. All other trace events are
enabled by default.
TODO :
This could be enhanced when the trace-event namespace is partitioned into a
group and an ID within that group. In such a case, marking a group as enabled
would automatically enable all trace-events listed under it.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch introduces the trace-events file where trace events can be
declared like so:
qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"
These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events. Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).
The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.
The trace-events file serves two purposes:
1. Adding trace events is easy. It is not necessary to understand the
details of a backend tracing system. The trace-events file is a
single location where trace events can be declared without code
duplication.
2. QEMU is not tightly coupled to one particular backend tracing system.
In order to support tracing across QEMU host platforms and to
anticipate new backend tracing systems that are currently maturing,
it is important to be flexible and not tied to one system.
This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
