If reserved_va, then we have already reserved the entire
guest virtual address space; no need to remap page.
If !reserved_va, then use MAP_FIXED_NOREPLACE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-6-richard.henderson@linaro.org>
AT_PAGESZ is supposed to advertise the guest page size.
The random adjustment made here using qemu_host_page_size
does not match anything else within linux-user.
The idea here is good, but should be done more systemically
via adjustment to TARGET_PAGE_SIZE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-5-richard.henderson@linaro.org>
The host SHMLBA is by definition a multiple of the host page size.
Thus the remaining component of qemu_host_page_size is the
target page size.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-4-richard.henderson@linaro.org>
Use TARGET_PAGE_SIZE and MAP_FIXED_NOREPLACE.
We really should be attending to this earlier during
probe_guest_base, as well as better detection and
emulation of various Linux personalities.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-3-richard.henderson@linaro.org>
By unprotecting regions, we re-instate writability and
unify regions that have been split, which may reduce
the total number of regions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than creating new data structures for vma,
rely on the IntervalTree used by walk_memory_regions.
Use PAGE_* constants, per the page table api, rather
than PROT_* constants, per the mmap api.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the flags that we've already saved in order to test
accessibility. Use g2h_untagged and compare guest memory
directly instead of copy_from_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need to copy pages from guest memory before writing
them out. Because vmas are contiguous in host memory, we can
write them in one go.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes a bug in which write_note() wrote namesz_rounded
and datasz_rounded bytes, even though name and data
pointers contain only the unrounded number of bytes.
Instead of many small writes, allocate a block to contain all
of the elf headers and all of the notes. Copy the data into the
block piecemeal and the write it to the file as a chunk.
This also avoids the need to lseek forward for alignment.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Verify the size of the corefile vs the rlimit before
opening and creating the core file at all.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow changes to the set of cpus and memory regions
while we are dumping core.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Swap the ordering of vma_init and open. This will be necessary
for further changes, and adjusts the error cleanup path. Narrow
the scope of corefile, as the variable can be freed immediately
after use in open().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On the off-chance that one of the cleanup functions changes
errno, latch the errno that we want to return beforehand.
Flush errno to 0 upon success, rather than at the beginning.
No need to avoid negation of 0.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ignoring the fact that g_malloc cannot fail, the structure
is quite small and might as well be allocated locally.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In fill_note_info, there were unnecessary checks for
success of g_new/g_malloc. But these structures do not
need to be dyamically allocated at all, and can in fact
be statically allocated within the parent structure.
This removes all error paths from fill_note_info, so
change the return type to void.
Change type of signr to match both caller (elf_core_dump)
and callee (fill_prstatus), which both use int for signr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not dump core at all if getrlimit fails; this ensures
that dumpsize is valid throughout the function, not just
for the initial test vs rlim_cur.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While async processes are rare for linux-user we do use them from time
to time. The most obvious one is tb_flush when we run out of
translation space. We will also need this when we move plugin
vcpu_init to an async task.
Fix nios2 to follow its older, wiser and more stable siblings.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-19-alex.bennee@linaro.org>
The API does not generate an error for setting ASYNC | SYNC; that merely
constrains the selection vs the per-cpu default. For qemu linux-user,
choose SYNC as the default.
Cc: qemu-stable@nongnu.org
Reported-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without this padding, an unwind through the signal handler
will pick up the unwind info for the preceding syscall.
This fixes gcc's 30_threads/thread/native_handle/cancel.cc.
Cc: qemu-stable@nongnu.org
Fixes: ee95fae075 ("linux-user/aarch64: Add vdso")
Resolves: https://linaro.atlassian.net/browse/GNU-974
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240202034427.504686-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231103173841.33651-16-richard.henderson@linaro.org>
QEMU coding style recommends using structure typedefs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg/ should not depend on accel/tcg/, but perf and debuginfo
support provided by the latter are being used by tcg/tcg.c.
Since that's the only user, move both to tcg/.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231212003837.64090-5-iii@linux.ibm.com>
Message-Id: <20240125054631.78867-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A process can opt-out of coredump creation by calling
prctl(PR_SET_DUMPABLE, 0).
linux-user passes this call from the guest through to the
operating system.
From there it can be read back again to avoid creating coredumps from
qemu-user itself if the guest chose so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240120-qemu-user-dumpable-v3-2-6aa410c933f1@t-8ch.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Should getrlimit() fail the value of dumpsize.rlimit_cur may not be
initialized. Avoid reading garbage data by checking the return value of
getrlimit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240120-qemu-user-dumpable-v3-1-6aa410c933f1@t-8ch.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A typo in sizeof_reg put the registers at the wrong offset.
Simplify the expressions to use positive addresses from the
start of uc_mcontext instead of negative addresses from the
end of uc_mcontext.
Reported-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit f4e1168198 (linux-user: Split out host_sig{segv,bus}_handler)
introduced a bug, when returning from host_sigbus_handler the PC is
never set. Thus cpu_loop_exit_restore is called with a zero PC and
we immediate get a SIGSEGV.
Signed-off-by: Robbin Ehn <rehn@rivosinc.com>
Fixes: f4e1168198 ("linux-user: Split out host_sig{segv,bus}_handler")
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Message-Id: <33f27425878fb529b9e39ef22c303f6e0d90525f.camel@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This option has been deprecated before the 8.1 release,
in commit 12fd0f41d0 ("Document that -singlestep command
line option is deprecated"). Time to drop it.
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'ev67' CPU class will be returned to match everything, which makes
no sense as mentioned in the comments. Remove the logic to fall
back to 'ev67' CPU class to match everything.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114235628.534334-2-gshan@redhat.com>
[PMD: Reword subject, replace 'any' -> 'ev67' on linux-user]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replaces TABS with spaces to ensure have a consistent coding
style with an indentation of 4 spaces in the SH4 subsystem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/376
Signed-off-by: Yihuan Pan <xun794@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231124044554.513752-1-xun794@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Support for probing the Zicboz block size landed in Linux 6.6, which was
released a few weeks ago. This provides the user-configured block size
when Zicboz is enabled.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231110173716.24423-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The file offset of the load segment is not relevant to the
low address, only the beginning of the virtual address page.
Cc: qemu-stable@nongnu.org
Fixes: a93934fecd ("elf: take phdr offset into account when calculating the program load address")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1952
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
In FDPIC signal handlers are passed around as FD pointers. Actual code
address and GOT pointer must be fetched from memory by the QEMU code
that implements kernel signal delivery functionality. This change is
equivalent to the following kernel change:
9c2cc74fb31e ("xtensa: fix signal delivery to FDPIC process")
Cc: qemu-stable@nongnu.org
Fixes: d2796be69d ("linux-user: add support for xtensa FDPIC")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Fix:
hw/core/machine.c:1302:22: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const CPUArchId *cpus = possible_cpus->cpus;
^
hw/core/numa.c:69:17: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
uint16List *cpus = NULL;
^
hw/acpi/aml-build.c:2005:20: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
CPUArchIdList *cpus = ms->possible_cpus;
^
hw/core/machine-smp.c:77:14: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
unsigned cpus = config->has_cpus ? config->cpus : 0;
^
include/hw/core/cpu.h:589:17: note: previous declaration is here
extern CPUTailQ cpus;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231010115048.11856-2-philmd@linaro.org>
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
g3oVZA==
=dxC7
-----END PGP SIGNATURE-----
Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into staging
target/hppa: Implement PA2.0 instructions
hw/hppa: Map astro chip 64-bit I/O mem
hw/hppa: Turn on 64-bit cpu for C3700
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2
# ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn
# O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH
# XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx
# mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa
# smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I
# g3oVZA==
# =dxC7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 11:00:01 HKT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu: (85 commits)
hw/hppa: Allow C3700 with 64-bit and B160L with 32-bit CPU only
hw/hppa: Turn on 64-bit CPU for C3700 machine
hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memory
hw/pci-host/astro: Map Astro chip into 64-bit I/O memory region
target/hppa: Improve interrupt logging
target/hppa: Update IIAOQ, IIASQ for pa2.0
target/hppa: Create raise_exception_with_ior
target/hppa: Add unwind_breg to CPUHPPAState
target/hppa: Clear upper bits in mtctl for pa1.x
target/hppa: Avoid async_safe_run_on_cpu on uniprocessor system
target/hppa: Add pa2.0 cpu local tlb flushes
target/hppa: Implement pa2.0 data prefetch instructions
linux-user/hppa: Drop EXCP_DUMP from handled exceptions
hw/hppa: Translate phys addresses for the cpu
include/hw/elf: Remove truncating signed casts
target/hppa: Return zero for r0 from load_gpr
target/hppa: Precompute zero into DisasContext
target/hppa: Fix interruption based on default PSW
target/hppa: Implement PERMH
target/hppa: Implement MIXH, MIXW
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Avoid target_ulong and use abi_* types.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit f57d5f8004 deprecated the 'any' CPU type but failed to change the
default CPU for linux-user. The result is that all linux-users
invocations that doesn't specify a different CPU started to show a
deprecation warning:
$ ./build/qemu-riscv64 ./foo-novect.out
qemu-riscv64: warning: The 'any' CPU is deprecated and will be removed in the future.
Change the default CPU for RISC-V linux-user from 'any' to 'max'.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: f57d5f8004 ("target/riscv: deprecate the 'any' CPU type")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231020074501.283063-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All instructions have been converted to generate
full condition codes explicitly.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Step in removing CC_OP: change the representation of CC_OP_FLAGS.
The 8 bits are distributed between 6 variables, which should make
it easy to keep up to date.
The code within cc_helper.c is quite ugly but is only temporary.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Isolate linux-user from changes to icc representation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-7-gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-6-gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-5-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231101030816.2353416-2-gaosong@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The AArch64 ELF hwcap2 field is 64 bits, but our get_elf_hwcap2()
works with uint32_t, so it accidentally fails to report any hwcaps
over bit 31. Use uint64_t here.
The Arm hwcap2 is only 32 bits (because the ELF format makes these
fields be the size of "long" in the ABI), but since it shares the
prototype declaration for get_elf_hwcap2() it is easier to also
expand it to 64 bits.
The only hwcap fields we implement already that are affected by this
are the HBC and MOPS ones, neither of which were implemented in a
previous release, so this doesn't need backporting to older stable
branches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231030174000.3792225-3-peter.maydell@linaro.org
Specifically DIT, LSE2, and MTE3.
We already expose detection of these via the CPUID interface, but
missed these from ELF hwcaps.
Signed-off-by: Marielle Novastrider <marielle@novastrider.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20231029210058.38986-1-marielle@novastrider.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed conflict with feature tests moving to cpu-features.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add support in gen-vdso-elfn.c.inc for the DT_PPC64_OPT
dynamic tag: this is an integer, so does not need relocation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Requires a relatively recent binutils version in order to avoid
spurious R_LARCH_NONE relocations. The presence of these relocs
are diagnosed by our gen-vdso tool.
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This tool will be used for post-processing the linked vdso image,
turning it into something that is easy to include into elfload.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The vdso image will be pre-processed into a C data array, with
a simple list of relocations to perform, and identifying the
location of signal trampolines.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are only a couple of uses of bprm->fd remaining.
Migrate to the other field.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Aside from the section headers, we're unlikely to hit the
ImageSource cache on guest executables. But the interface
for imgsrc_read_* is better.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change parse_elf_properties as well, as the bprm_buf argument
ties the two functions closely.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rearrange the allocation of storage for ehdr between load_elf_image
and load_elf_binary. The same set of copies are done, but we don't
modify bprm_buf, which will be important later.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg the if cases to reduce indentation.
Test for 4 bytes in the file before checking the signatures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduced and initialized, but not yet really used.
These will tidy the current tests vs BPRM_BUF_SIZE.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The arithmetic within the loop was not adjusted properly after SIGRTMIN
was stolen for the guest SIGABRT. The effect was that the guest libc
could not send itself __SIGRTMIN to wake sleeping threads.
Fixes: 38ee0a7dfb ("linux-user: Remap guest SIGABRT")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1967
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
The oldest supported cpu is the microsparc 1; all other cpus
use CPU_DEFAULT_FEATURES. Remove the features that must always
be present for sparcv7: FLOAT, SWAP, FLUSH, FSQRT, FMUL.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Distinguish host SIGABRT from guest SIGABRT by mapping
the guest signal onto one of the host RT signals.
This prevents a cycle by which a host assertion failure
is caught and handled by host_signal_handler, queued for
the guest, and then we attempt to continue past the
host abort. What happens next depends on the host libc,
but is neither good nor helpful.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These signals, when not spoofed via kill(), are always bugs.
Use die_from_signal to report this sensibly.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make host_signal_handler slightly easier to read.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Install the host signal handler at the same time we are
probing the target signals for SIG_IGN/SIG_DFL. Ignore
unmapped target signals.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not return a valid signal number in one domain
when given an invalid signal number in the other domain.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The set of fatal signals is really immaterial. If one arrives,
and is unhandled, then the qemu process dies and the parent gets
the correct signal.
It is only for those signals which we would like to perform a
guest core dump instead of a host core dump that we need to catch.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If there is an internal program error in the qemu source code which
raises SIGSEGV or SIGBUS, we currently assume the signal belongs to
the guest. With an artificial error introduced, we will now print
QEMU internal SIGSEGV {code=MAPERR, addr=(nil)}
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20230812164314.352131-1-deller@gmx.de>
[rth: Use in_code_gen_buffer and die_with_signal; drop backtrace]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This line is supposed to be unreachable, but if we're going to
have it at all, SIGABRT via abort() is subject to the same signal
peril that created this function in the first place.
We can _exit immediately without peril.
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because we trap so many signals for use by the guest,
we have to take extra steps to exit properly.
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not assert success, but return any failure received.
Additionally, fix the method of earlier error return in target_munmap.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since support for LSX and LASX is landed in QEMU recently, we can update
HWCAPS accordingly.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231001085315.1692667-1-c@jia.je>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
sh4 uses gUSA (general UserSpace Atomicity) to provide atomicity on CPUs
that don't have atomic instructions. A gUSA region that adds 1 to an
atomic variable stored in @R2 looks like this:
4004b6: 03 c7 mova 4004c4 <gusa+0x10>,r0
4004b8: f3 61 mov r15,r1
4004ba: 09 00 nop
4004bc: fa ef mov #-6,r15
4004be: 22 63 mov.l @r2,r3
4004c0: 01 73 add #1,r3
4004c2: 32 22 mov.l r3,@r2
4004c4: 13 6f mov r1,r15
R0 contains a pointer to the end of the gUSA region
R1 contains the saved stack pointer
R15 contains negative length of the gUSA region
When this region is interrupted by a signal, the kernel detects if
R15 >= -128U. If yes, the kernel rolls back PC to the beginning of the
region and restores SP by copying R1 to R15.
The problem happens if we are interrupted by a signal at address 4004c4.
R15 still holds the value -6, but the atomic value was already written by
an instruction at address 4004c2. In this situation we can't undo the
gUSA. The function unwind_gusa does nothing, the signal handler attempts
to push a signal frame to the address -6 and crashes.
This patch fixes it, so that if we are interrupted at the last instruction
in a gUSA region, we copy R1 to R15 to restore the correct stack pointer
and avoid crashing.
There's another bug: if we are interrupted in a delay slot, we save the
address of the instruction in the delay slot. We must save the address of
the previous instruction.
Cc: qemu-stable@nongnu.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourcefoege.jp>
Message-Id: <b16389f7-6c62-70b7-59b3-87533c0bcc@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QEMU mips userspace emulation crashes with "qemu: unhandled CPU exception
0x15 - aborting" when one of the integer arithmetic instructions detects
an overflow.
This patch fixes it so that it delivers SIGFPE with FPE_INTOVF instead.
Cc: qemu-stable@nongnu.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Message-Id: <3ef979a8-3ee1-eb2d-71f7-d788ff88dd11@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous change, 2d385be615, assumed !PAGE_VALID meant that
the page would be unmapped by the elf image. However, since we
reserved the entire image space via mmap, PAGE_VALID will always
be set. Instead, assume PROT_NONE for the same condition.
Furthermore, assume bss is only ever present for writable segments,
and that there is no page overlap between PT_LOAD segments.
Instead of an assert, return false to indicate failure.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1854
Fixes: 2d385be615 ("linux-user: Do not adjust zero_bss for host page size")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
p is a generic variable in syscall() and can be used by any syscall
case, so this patch removes the useless local variable declaration for
the following syscalls: TARGET_NR_llistxattr, TARGET_NR_listxattr,
TARGET_NR_setxattr, TARGET_NR_lsetxattr, TARGET_NR_getxattr,
TARGET_NR_lgetxattr, TARGET_NR_removexattr, TARGET_NR_lremovexattr.
Fix following warnings:
.../linux-user/syscall.c:12342:15: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12342 | void *p, *b = 0;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
.../linux-user/syscall.c:12379:19: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12379 | void *p, *n, *v = 0;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
.../linux-user/syscall.c:12424:19: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12424 | void *p, *n, *v = 0;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
.../linux-user/syscall.c:12469:19: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12469 | void *p, *n;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20230925151029.461358-6-laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix following warnings:
.../linux-user/mmap.c: In function 'target_mremap':
.../linux-user/mmap.c:913:13: warning: declaration of 'prot' shadows a previous local [-Wshadow=compatible-local]
913 | int prot = 0;
| ^~~~
../../../Projects/qemu/linux-user/mmap.c:871:9: note: shadowed declaration is here
871 | int prot;
| ^~~~
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20230925151029.461358-3-laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix following warnings:
.../linux-user/flatload.c: In function 'load_flt_binary':
.../linux-user/flatload.c:758:23: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
758 | abi_ulong p;
| ^
../../../Projects/qemu/linux-user/flatload.c:722:15: note: shadowed declaration is here
722 | abi_ulong p;
| ^
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20230925151029.461358-2-laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This build option has been deprecated since 8.0.
Remove all CONFIG_GPROF code that depends on that,
including one errant check using TARGET_GPROF.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use abi_ullong not uint64_t so that the alignment of the field
and therefore the layout of the struct is correct.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
