The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename num_normal_pages to total_normal_pages (peter)
We are only sending normal pages through multifd channels.
Later on this series, we are going to also send zero pages.
We are going to detect if a page is zero or non zero in the multifd
channel thread, not on the main thread.
So we receive an array of pages page->offset[N]
And we will end with:
p->normal[N - zero_pages]
p->zero[zero_pages].
In this patch, we just copy all the pages in offset to normal.
for (i = 0; i < pages->num; i++) {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}
Later in the series this becomes:
for (i = 0; i < pages->num; i++) {
if (buffer_is_zero(page->offset[i])) {
p->zerol[p->zero_num] = pages->offset[i];
p->zero_num++:
} else {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}
}
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Improving comment (dave)
Renaming num_normal_pages to total_normal_pages (peter)
Until now, we wrote the packet header with write(), and the rest of the
pages with writev(). Just increase the size of the iovec and do a
single writev().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It happens that there are functions to calculate the worst possible
compression size for a packet. Use them.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We always need to call it when we find a zero page, so put it in a
single place.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Remove the mask in the call to ram_release_pages(). Nothing else does
it, and if the offset has that bits set, we have a lot of trouble.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove the pages argument. And s/pages/page/
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
- Use 1LL instead of casts (philmd)
- Change the whole 1ULL for TARGET_PAGE_SIZE
We only need last_stage in two places and we are passing it all
around. Just add a field to RAMState that passes it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
Repeat subject (philmd suggestion)
So printing it as %d is wrong. Notice that for the channel id, that
is an uint8_t, but I changed it anyways for consistency.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
In some cases, a particular mapcache entry may be mapped 256 times
causing the lock field to wrap to 0. For example, this may happen when
using emulated NVME and the guest submits a large scatter-gather write.
At this point, the entry map be remapped causing QEMU to write the wrong
data or crash (since remap is not atomic).
Avoid this overflow by increasing the lock field to a uint32_t and also
detect it and abort rather than continuing regardless.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20220124104450.152481-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
commit f37f29d314 "xen: slightly simplify bufioreq handling" hard
coded setting req.count = 1 during initial field setup before the main
loop. This missed a subtlety that an early exit from the loop when
there are no ioreqs to process, would have req.count == 0 for the return
value. handle_buffered_io() would then remove state->buffered_io_timer.
Instead handle_buffered_iopage() is basically always returning true and
handle_buffered_io() always re-setting the timer.
Restore the disabling of the timer by introducing a new handled_ioreq
boolean and use as the return value. The named variable will more
clearly show the intent of the code.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20211210193434.75566-1-jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.
Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.
Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making trace generation work for tests/ and qga/ would involve some
Meson hackery to ensure we generate the trace-events files before
trace-tool uses them. Since we don't actually support tracing there
anyway, we bypass that problem.
Let's add corresponding comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Pasto fixed, commit message punctuation tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Previous commits enabled trace events generation for most of QAPI
generated code (except for tests/ and qga/). Let's update documentation
to illustrate it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-6-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
1. Use --gen-trace when generate qmp commands
2. Add corresponding .trace-events files as outputs in qapi_files
custom target
3. Define global qapi_trace_events list of .trace-events file targets,
to fill in trace/qapi.build and to use in trace/meson.build
4. In trace/meson.build use the new array as an additional source of
.trace_events files to be processed
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-5-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add trace generation disabled by default and new option --gen-trace to
enable it. The next commit will enable it for qapi/, but not for qga/
and tests/. Making it work for the latter two would involve some Meson
hackery to ensure we generate the trace-events files before trace-tool
uses them. Since we don't actually support tracing there, we'll bypass
that problem.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-4-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move error_propagate() to if (err) and make "if (err)" block mandatory.
This is to simplify further commit, which will bring trace events
generation for QMP commands.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-3-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We are going to generate trace events for QMP commands. We should
generate both trace_*() function calls and trace-events files listing
events for trace generator.
So, add an output module FOO.trace-events for each FOO schema module.
Since we're going to add trace events only to command marshallers,
make the trace-events output optional, so we don't generate so many
useless empty files.
Currently nobody set add_trace_events to True, so new functionality is
disabled. It will be enabled for QAPISchemaGenCommandVisitor
in a further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-2-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Similar to f7160f3218 "schemas: Add vim modeline"
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20211220145624.52801-1-victortoso@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
At the start, drop membership of all supplementary groups. This is
not required.
If we have membership of "root" supplementary group and when we switch
uid/gid using setresuid/setsgid, we still retain membership of existing
supplemntary groups. And that can allow some operations which are not
normally allowed.
For example, if root in guest creates a dir as follows.
$ mkdir -m 03777 test_dir
This sets SGID on dir as well as allows unprivileged users to write into
this dir.
And now as unprivileged user open file as follows.
$ su test
$ fd = open("test_dir/priviledge_id", O_RDWR|O_CREAT|O_EXCL, 02755);
This will create SGID set executable in test_dir/.
And that's a problem because now an unpriviliged user can execute it,
get egid=0 and get access to resources owned by "root" group. This is
privilege escalation.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2044863
Fixes: CVE-2022-0358
Reported-by: JIETAO XIAO <shawtao1125@gmail.com>
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <YfBGoriS38eBQrAb@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixed missing {}'s style nit
A few fixes to the Python CI tests, a few fixes to the (async) QMP
library, and a set of patches that begin to shift us towards using the
new qmp lib.
-----BEGIN PGP SIGNATURE-----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=D2kj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' into staging
Python patches
A few fixes to the Python CI tests, a few fixes to the (async) QMP
library, and a set of patches that begin to shift us towards using the
new qmp lib.
# gpg: Signature made Sat 22 Jan 2022 00:07:58 GMT
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jsnow-gitlab/tags/python-pull-request:
scripts/render-block-graph: switch to AQMP
scripts/cpu-x86-uarch-abi: switch to AQMP
scripts/cpu-x86-uarch-abi: fix CLI parsing
python: move qmp-shell under the AQMP package
python: move qmp utilities to python/qemu/utils
python/qmp: switch qmp-shell to AQMP
python/qmp: switch qom tools to AQMP
python/qmp: switch qemu-ga-client to AQMP
python/qemu-ga-client: don't use deprecated CLI syntax in usage comment
python/aqmp: rename AQMPError to QMPError
python/aqmp: add SocketAddrT to package root
python/aqmp: copy type definitions from qmp
python/aqmp: handle asyncio.TimeoutError on execute()
python/aqmp: add __del__ method to legacy interface
python/aqmp: fix docstring typo
python: use avocado's "new" runner
python: pin setuptools below v60.0.0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Creating an instance of qemu.aqmp.ExecuteError is too involved here, so
just drop the specificity down to a generic QMPError.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
In order to upload a QMP package to PyPI, I want to remove any scripts
that I am not 100% confident I want to support upstream, beyond our
castle walls.
Move most of our QMP utilities into the utils package so we can split
them out from the PyPI upload.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
We have a replacement for async QMP, but it doesn't have feature parity
yet. For now, then, port the old tool onto the new backend.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Async QMP always raises a "ConnectError" on any connection error which
houses the cause in a second exception. We can check if this root cause
was python's ConnectionError to determine a fairly similar condition to
the original error check here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Cleanup related to commit ccd3b3b811, "qemu-option: warn for
short-form boolean options".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is in preparation for renaming qemu.aqmp to qemu.qmp. I should have
done this from this from the very beginning, but it's a convenient time
to make sure this churn is taken care of.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's a commonly needed definition, it can be re-exported by the root.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Copy the remaining type definitions from QMP into the qemu.aqmp.legacy
module. Now, users that require the legacy interface don't need to
import anything else but qemu.aqmp.legacy wrapper.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
This exception can be injected into any await statement. If we are
canceled via timeout, we want to clear the pending execution record on
our way out.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
asyncio can complain *very* loudly if you forget to back out of things
gracefully before the garbage collector starts destroying objects that
contain live references to asyncio Tasks.
The usual fix is just to remember to call aqmp.disconnect(), but for the
sake of the legacy wrapper and quick, one-off scripts where a graceful
shutdown is not necessarily of paramount imporance, add a courtesy
cleanup that will trigger prior to seeing screenfuls of confusing
asyncio tracebacks.
Note that we can't *always* save you from yourself; depending on when
the GC runs, you might just seriously be out of luck. The best we can do
in this case is to gently remind you to clean up after yourself.
(Still much better than multiple pages of incomprehensible python
warnings for the crime of forgetting to put your toys away.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
The old legacy runner no longer seems to work with output logging, so we
can't see failure logs when a test case fails. The new runner doesn't
(seem to) support Coverage.py yet, but seeing error output is a more
important feature.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220119193916.4138217-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
setuptools is a package that replaces the python stdlib 'distutils'. It
is generally installed by all venv-creating tools "by default". It isn't
actually needed at runtime for the qemu package, so our own setup.cfg
does not mention it as a dependency.
However, tox will create virtual environments that include it, and will
upgrade it to the very latest version. the 'venv' tool will also include
whichever version your host system happens to have.
Unfortunately, setuptools version 60.0.0 and above include a hack to
forcibly overwrite python's built-in distutils. The pylint tool that we
use to run code analysis checks on this package relies on distutils and
suffers regressions when setuptools >= 60.0.0 is present at all, see
https://github.com/PyCQA/pylint/issues/5704
Instruct tox and the 'check-dev' targets to avoid setuptools packages
that are too new, for now. Pipenv is unaffected, because setuptools 60
does not offer Python 3.6 support, and our pipenv config is pinned
against Python 3.6.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20220121005221.142236-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
