This patch adds the 'units_per_default_bus' property which
allows individual boards to declare their desired
index => (bus,unit) mapping for their default HBA, so that
boards such as Q35 can specify that its default if_ide HBA,
AHCI, only accepts one unit per bus.
This property only overrides the mapping for drives matching
the block_default_type interface.
This patch also adds this property to *all* past and present
Q35 machine types. This retroactive addition is justified
because the previous erroneous index=>(bus,unit) mappings
caused by lack of such a property were not utilized due to
lack of initialization code in the Q35 init routine.
Further, semantically, the Q35 board type has always had the
property that its default HBA, AHCI, only accepts one unit per
bus. The new code added to add devices to drives relies upon
the accuracy of this mapping. Thus, the property is applied
retroactively to reduce complexity of allowing IDE HBAs with
different units per bus.
Examples:
Prior to this patch, all IDE HBAs were assumed to use 2 units
per bus (Master, Slave). When using Q35 and AHCI, however, we
only allow one unit per bus.
-hdb foo.qcow2 would become index=1, or bus=0,unit=1.
-hdd foo.qcow2 would become index=3, or bus=1,unit=1.
-drive file=foo.qcow2,index=5 becomes bus=2,unit=1.
These are invalid for AHCI. They now become, under Q35 only:
-hdb foo.qcow2 --> index=1, bus=1, unit=0.
-hdd foo.qcow2 --> index=3, bus=3, unit=0.
-drive file=foo.qcow2,index=5 --> bus=5,unit=0.
The mapping is adjusted based on the fact that the default IF
for the Q35 machine type is IF_IDE, and units-per-default-bus
overrides the IDE mapping from its default of 2 units per bus
to just 1 unit per bus.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The if_max_devs table as in the past been an immutable
default that controls the mapping of index => (bus,unit)
for all boards and all HBAs for each interface type.
Since adding this mapping information to the HBA device
itself is currently unwieldly from the perspective of
retrieving this information at option parsing time
(e.g, within drive_new), we consider the alternative
of marking the if_max_devs table mutable so that
later configuration and initialization can adjust the
mapping at will, but only up until a drive is added,
at which point the mapping is finalized.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When users use command line options like -hda, -cdrom,
or even -drive if=ide, it is up to the board initialization
routines to pick up these drives and create backing
devices for them.
Some boards, like Q35, have not been doing this.
However, there is no warning explaining why certain
drive specifications are just silently ignored,
so this function adds a check to print some warnings
to assist users in debugging these sorts of issues
in the future.
This patch will not warn about drives added with if_none,
for which it is not possible to tell in advance if
the omission of a backing device is an issue.
A warning in these cases is considered appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The requirement for this test case is really "no O_DIRECT", because the
temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often
is a tmpfs.
Commit f210a83c ('qemu-iotests: Add _default_cache_mode and
_supported_cache_modes') turned the restriction into writethrough-only,
but that's not really necessary.
Allow to run the test for any non-O_DIRECT cache modes, and use the
global default of writeback if no cache mode is specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When qemu-iotests only gave a choice between cache=none and
cache=writethrough, we picked cache=none because it was the option that
would complete the test in finite time. Some tests could only work for
one of the two options and would be skipped with cache=none, but that
was an acceptable trade-off at the time.
Today, however, qemu-iotests is a bit more flexible than that and you
can specify any of the cache modes supported by qemu. The default is
writeback, like in qemu, which is fast and (unlike cache=none) compatible
with any host filesystem. Test cases that have specific requirements for
the cache mode can also specify a different default.
In order to get a fast test run that works everywhere and doesn't skip
tests that need a different cache mode, not specifying any cache mode
and instead relying on the default is the best we can do today.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add realization of rename all items in opts for qemu_opt_rename.
e.g:
When add bps twice in command line, need to rename all bps to
throttling.bps-total.
This patch solved following bug:
Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive
ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586
[Resolved conflict with commit 5abbf0ee4d
("block: Catch simultaneous usage of options and their aliases"). Check
for simultaneous use first, and then loop over all options.
--Stefan]
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411537527-16715-1-git-send-email-junmuzi@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$ ./qemu-img create -f qcow2 overlay \
-b 'json: { "file.driver":"ssh",
"file.host":"localhost",
"file.host_key_check":"no" }'
qemu-img: qobject/qdict.c:193: qdict_get_obj: Assertion `obj != ((void *)0)' failed.
Aborted
A similar crash also happens if the file.host field is omitted.
https://bugzilla.redhat.com/show_bug.cgi?id=1147343
Bug found and reported by Jun Li.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The while loop variabal is "bs1",
but "bs" is always passed to bdrv_snapshot_delete_by_id_or_name.
Broken in commit a89d89d, v1.7.0.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=CrF6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20141002-1' into staging
vga: cleanups, prepare for endianness switching
# gpg: Signature made Thu 02 Oct 2014 08:10:49 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vga-20141002-1:
vga: Add endian to vmstate
vga: Make fb endian a common state variable
vga: Rename vga_template.h to vga-helpers.h
vga: Remove some "should be done in BIOS" comments
cirrus: Remove non-32bpp cursor drawing
vga: Simplify vga_draw_blank() a bit
vga: Remove rgb_to_pixel indirection
vga: Separate LE and BE conversion functions
vga: Remove remainder of old conversion cruft
vga: Start cutting out non-32bpp conversion support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Which allows specification of absolute/relative,
up/down and console parameters.
Suggested by Gerd Hoffman.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 2e377f1730 changed the ordering
of the release events as side effect. Some guests are not happy with
that and don't recognise ctrl-alt-del any more. This patch restores
the old last-pressed first-released behavior.
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUKpR2AAoJEBRUblpOawnXNLAH/RBeF66ZqWc29dl78JKEbv0+
C5pL61GhlI5vFIjSbPU3/iaZQifw3E4NLvX3SCN5ImsLzBw4r3qerapP2Ut96K/j
5CYdWTF1oqE32oCefvlWhJulHmE1vxGN53BvOz3HHxoehdF1/tJ0wUoZyfztGTOF
tiW85VMewi6CKm47/ns5tSNfGMVzWHqnUg67z/mwN6ZmPFU1dXBlgmiIv8Znahrn
B1AOAeMjWaKvOS+tiYNVG6k0GENWGoiypxiTR3ZXLQKxOYdkh/X0ARULqLMonASX
YsT772nzO9KZDIsdLj9QZZmM7vxs7UhW0MgQlvcSWP9vfZa5SeuRSgoXorPDj3Q=
=54T3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey 4E6B09D7.
# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (39 commits)
block/iscsi: handle failure on malloc of the allocationmap
util: introduce bitmap_try_new
virtio-scsi: Handle TMF request cancellation asynchronously
scsi: Introduce scsi_req_cancel_async
scsi: Introduce scsi_req_cancel_complete
scsi: Drop SCSIReqOps.cancel_io
scsi: Unify request unref in scsi_req_cancel
scsi-generic: Handle canceled request in scsi_command_complete
scsi: Drop scsi_req_abort
virtio-scsi: Process ".iothread" property
virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
virtio-scsi: Batched prepare for cmd reqs
virtio-scsi: Two stages processing of cmd request
virtio-scsi: Add migration state notifier for dataplane code
virtio-scsi: Hook up with dataplane
virtio-scsi-dataplane: Code to run virtio-scsi on iothread
virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
virtio-scsi: Add 'iothread' property to virtio-scsi
virtio: add a wrapper for virtio-backend initialization
virtio-9p: fix virtio-9p child refcount in transports
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUKZANAAoJECgfDbjSjVRpLioIAMOPDvlR420MQmcEeE6xAjLy
s5bVT4cRlU/zWq6H1aCWjPgy8le5CmpZ36pdyyMZmsNZTzkfuWjIhfZChRAeb6tM
p7Z5mWDeIrCuYDL0b+h00liRUDEJBxaiqyEOKZEsOZeBgI0k0fjnf+BKNjQ6abN4
qpT0Cn+3O49p+G56YUPDF96RYs/tMUEqNI1B49CRYISgDuFgMy3PCt0JxsN9WsYi
7pCCH6axLuNifWkdk+fLD6fOmfM2G0naWYbPSjdrgkTVo6Fwy8NUwSVNuxztnueP
4rBFhn89VgpCCQscD30LQeLnMOq/rDwjEFqvkaJnZu2QSyXR6y8aeC5Y28hpRIY=
=Td4E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio, misc bugfixes
A bunch of bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 Sep 2014 17:59:57 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vl: Adjust the place of calling mlockall to speedup VM's startup
pc-dimm: Don't check dimm->node when there is non-NUMA config
pci-hotplug-old: avoid losing error message
Revert "virtio-pci: fix migration for pci bus master"
loader: g_realloc(p, 0) frees and returns NULL, simplify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include the endian state in the migration stream as an optional
subsection which we only include when the endian isn't the default,
thus enabling backward compatibility of the common case.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Changes by kraxel:
* Remove bochs dispi interface changes. We'll do that in
a different way to make sure we don't conflict with
possible future bochs dispi interface changes.
* keep live migration bits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
And initialize it based on target endian
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
It's no longer a template, we only instanciate the file once.
Keep it a #included file so the functions remain static.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Not all platforms have a VGA BIOS, powerpc typically relies on
using the DISPI interface to initialize the card.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
We only draw cursor on non-shared surfaces (so it seems...) and
these are always 32bpp
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
The test for surface_bits_per_pixel() isn't necessary anymore,
the 8bpp case never happens.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
We always use rgb_to_pixel32 nowadays.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Provide different functions for converting from an LE vs a BE
framebuffer. We cannot rely on the simple cases always being
shared surfaces since cirrus will need to always shadow for
cursor emulation, so we need the full set of functions to
be able to later handle runtime switching.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>\
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
All the macros used to generate different versions of vga_template.h
are now unnecessary, take them all out and remove the _32 suffix from
most functions.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Nowadays, we either share a surface with the host, or we create
a 32bpp ARGB console surface.
So we only need to draw/convert to 32bpp, enabling us to remove
all but one instance of vga_template.h inclusion (to be further
cleaned up), rgb_to_pixel_* etc...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
regular bitmap_new simply aborts if the memory allocation fails.
bitmap_try_new returns NULL on failure and allows for proper
error handling.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For VIRTIO_SCSI_T_TMF_ABORT_TASK and VIRTIO_SCSI_T_TMF_ABORT_TASK_SET,
use scsi_req_cancel_async to start the cancellation.
Because each tmf command may cancel multiple requests, we need to use a
counter to track the number of remaining requests we still need to wait
for.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Devices will call this function to start an asynchronous cancellation. The
bus->info->cancel will be called after the request is canceled.
Devices will probably need to track a separate TMF request that triggers this
cancellation, and wait until the cancellation is done before completing it. So
we store a notifier list in SCSIRequest and in scsi_req_cancel_complete we
notify them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let the aio cb do the clean up and notification job after scsi_req_cancel, in
preparation for asynchronous cancellation.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only two implementations are identical to each other, with nothing specific
to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb.
Let's move it to scsi-bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before, scsi_req_cancel will take ownership of the canceled request and unref
it. We did this because we didn't know whether AIO CB will be called or not
during the cancelling, so we set the io_canceled flag before calling it, and
skip unref in the potentially called callbacks, which is not very nice.
Now, bdrv_aio_cancel has a stricter contract that the completion callbacks are
always called, so we can remove the checks of req->io_canceled and just unref
it in callbacks.
It will also make implementing asynchronous cancellation easier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we always called the cb in bdrv_aio_cancel, let's make scsi-generic
callbacks check io_canceled flag similarly to scsi-disk.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only user of this function is spapr_vscsi.c. We can convert to
scsi_req_cancel plus adding a check in vscsi_request_cancelled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
[Drop prototype. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* more EL2/EL3 preparation work
* don't handle c15_cpar changes via tb_flush()
* fix some unused function warnings in ARM devices
* build the GDB XML for 32 bit CPUs into qemu-*-aarch64
* implement guest breakpoint support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJUKaQhAAoJEDwlJe0UNgzeDcQQAKwLgp/Z3G+uZ8r3eh/J1iJ7
RRfkiM9WqM92sZ6VvS6bJ48Q8ESiSF1csk2PKW1tuDx2pbpAG6MDJvFs//YLZWx2
gsSGZJ8grlvEZ/Tv10iJ5ttU1vOWicbw5FgvIrdel/94wr/gChvu64p2DIrXDslD
GPbr5wVNb/XXa3HuUNX66L2soxpf+YJc2fGunycp0aRRbBL8G+4dnPAt89iVFN2R
PGo/VL2qSGmyTpUk7JSQK12YBE/4BFNu+8KUgiUqVS1rIan8NkVU97VVKRlcd6e9
wl5s0Bb1sAow6hZMoNpnXPnDD8LF3w1SCXPM3mLUq4/iO8t2uuITq89UCNsjFrYy
QRkSq6PC0MLry+31Bfw9loDbEHMxs2fMwCQCJEdtVfZgHY/bRXAPLU/0luwvnPRU
gofqBtypakRzJpaDjA/y0KapaMtJr0KOrlcbntNztPFOf4X9QtGZaQ2fzrAfxtSR
7VbHdXKAwmWN2Q4r4GE0ixA0eCZWS9ji87LHv380pPkuOaYnoRq+A1KQlypkRnNr
ifR/Iz6QXB1GPFpbUiyh9WIltIIS4mwsOi/Y0rS7dGc40okItceb+ezulCNDPKNZ
IX+XDR5YFEKxWzoklMgLLZPFPjxSRKMNG6Grpowl+PH+fFsBz4hObkFMn2zajn8g
zp0lcq++iyjIE/GNkBXw
=LA6N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140929' into staging
target-arm:
* more EL2/EL3 preparation work
* don't handle c15_cpar changes via tb_flush()
* fix some unused function warnings in ARM devices
* build the GDB XML for 32 bit CPUs into qemu-*-aarch64
* implement guest breakpoint support
# gpg: Signature made Mon 29 Sep 2014 19:25:37 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140929:
target-arm: Add support for VIRQ and VFIQ
target-arm: Add IRQ and FIQ routing to EL2 and 3
target-arm: A64: Emulate the SMC insn
target-arm: Add a Hypervisor Trap exception type
target-arm: A64: Emulate the HVC insn
target-arm: A64: Correct updates to FAR and ESR on exceptions
target-arm: Don't take interrupts targeting lower ELs
target-arm: Break out exception masking to a separate func
target-arm: A64: Refactor aarch64_cpu_do_interrupt
target-arm: Add SCR_EL3
target-arm: Add HCR_EL2
target-arm: Don't handle c15_cpar changes via tb_flush()
hw/input/tsc210x.c: Delete unused array tsc2101_rates
hw/display/pxa2xx_lcd.c: Remove unused function pxa2xx_dma_rdst_set
hw/intc/imx_avic.c: Remove unused function imx_avic_set_prio()
hw/display/blizzard.c: Delete unused function blizzard_rgb2yuv
configure: Build GDB XML for 32 bit ARM CPUs into qemu aarch64 binaries
target-arm: Implement handling of breakpoint firing
target-arm: Implement setting guest breakpoints
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Queue the popped requests while calling
virtio_scsi_handle_cmd_req_prepare(), then submit them after all
prepared.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mechanical change, in preparation for bdrv_io_plug/bdrv_io_unplug.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to virtio-blk-dataplane, we stop the iothread while migration
starts and restart it when migration finishes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This enables the virtio-scsi-dataplane code by setting the iothread
in virtio-scsi device, and makes any function that is called by
back from dataplane to cooperate with the caller: they need to be
vring/iothread aware when handling the requests and using scsi devices
on the bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements the core part of dataplane feature of virtio-scsi.
A few fields are added in VirtIOSCSICommon to maintain the dataplane
status. These fields are managed by a new source file:
virtio-scsi-dataplane.c.
Most code in this file will run on an iothread, unless otherwise
commented as in a global mutex context, such as those functions to
start, stop and setting the iothread property.
Upon start, we set up guest/host event notifiers, in a same way as
virtio-blk does. The handlers then pop request from vring and call into
virtio-scsi.c functions to process it. So we need to make sure make all
those called functions work with iothread, too.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move VirtIOSCSIReq to header and add one field "vring" as a wrapper
structure of Vring, VirtIOSCSIVring.
This is necessary for coming dataplane code that runs uses vring on
iothread.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to this property in virtio-blk for dataplane, add it as a QOM
link in virtio-scsi and an alias in virtio-scsi-pci and virtio-scsi-ccw,
in order to assign an iothread to the device.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For better code sharing, add a helper function that handles
reference counting of the virtio backend for virtio proxy devices.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
