I/O regions will not have ram_addrs, so this is a better name.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Prepare for multiple address space support by abstracting away the details
of registering a memory range with qemu's flat representation into an
AddressSpace object.
Note operations which are memory specific are not abstracted, since they will
never be called on I/O address spaces anyway.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
get_system_memory() provides the root of the memory hierarchy.
This interface is intended to be private between memory.c and exec.c.
If this file is included elsewhere, it should be regarded as a bug (or
TODO item). However, it will be temporarily needed for the conversion
to hierarchical memory routing.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Simple implementations of memory routers, for example the Cirrus VGA memory banks
or the 440FX PAM registers can generate adjacent memory regions which are contiguous.
Detect these and merge them; this saves kvm memory slots and shortens lookup times.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently dirty tracking is implemented by passing through
all calls to the underlying cpu_physical_memory_*() calls.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The memory API separates the attributes of a memory region (its size, how
reads or writes are handled, dirty logging, and coalescing) from where it
is mapped and whether it is enabled. This allows a device to configure
a memory region once, then hand it off to its parent bus to map it according
to the bus configuration.
Hierarchical registration also allows a device to compose a region out of
a number of sub-regions with different properties; for example some may be
RAM while others may be MMIO.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Device models rely on the core invoking their reset handlers after init.
We do this in the cold-plug case, but so far we miss this step after
hot-plug.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add configure check for python, exit if not found. Add switches
for specifying the path to python, use the path in Makefile.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid this warning:
CC simpletrace.o
/src/qemu/simpletrace.c: In function 'writeout_thread':
/src/qemu/simpletrace.c:122:12: error: variable 'unused' set but not used [-Werror=unused-but-set-variable]
by adding GCC attribute unused to the variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
6e1db57b2a didn't
convert brlapi or win32 chrdevs, breaking build for those.
Fix by converting the chrdevs.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As far as I can tell, there isn't a dependency on gthread. Also, the only use
of gio was to enable GSocket to accept a unix domain socket.
Since GSocket isn't available on OpenSuSE 11.1, let's just remove that
dependency.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Correct typos of "licenced" to "licensed".
Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Derived from kvm-tool patch
http://thread.gmane.org/gmane.comp.emulators.kvm.devel/74309
Ingo Molnar pointed out that sending the timer signal to the whole
process, just blocking it everywhere, is suboptimal with an increasing
number of threads. QEMU is also using this pattern so far.
Linux provides a (non-portable) way to restrict the signal to a single
thread: We can use SIGEV_THREAD_ID unless we are forced to emulate
signalfd via an additional thread. That case could theoretically be
optimized as well, but it doesn't look worth bothering.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make use of the new clock reset notifier to update the RTC whenever
rtc_clock is the host clock and that happens to jump backward. This
avoids that the RTC stalls for the period the host clock was set back.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU_CLOCK_HOST is based on the system time which may jump backward in
case the admin or NTP adjusts it. RTC emulations and other device models
can suffer in this case as timers will stall for the period the clock
was tuned back.
This adds a detection mechanism that checks on every host clock readout
if the new time is before the last result. If that is the case a
notifier list is informed. Device models interested in this event can
register a notifier with the clock.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to pass additional information to the notifier callback
which is useful if sender and receiver do not share any other distinct
data structure.
Will be used first for the clock reset notifier.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Old version looks like this in info qtree (last four lines):
dev: virtconsole, id ""
dev-prop: is_console = 1
dev-prop: nr = 0
dev-prop: chardev = <null>
dev-prop: name = <null>
dev-prop-int: id: 0
dev-prop-int: guest_connected: 1
dev-prop-int: host_connected: 0
dev-prop-int: throttled: 0
Indentation is off, and "dev-prop-int" suggests these are properties
you can configure with -device, which isn't the case. The other
buses' print_dev() callbacks don't do that. For instance, PCI's
output looks like this:
class Ethernet controller, addr 00:03.0, pci id 1af4:1000 (sub 1af4:0001)
bar 0: i/o at 0xffffffffffffffff [0x1e]
bar 1: mem at 0xffffffffffffffff [0xffe]
bar 6: mem at 0xffffffffffffffff [0xfffe]
Change virtser_bus_dev_print() to that style. Result:
dev: virtconsole, id ""
dev-prop: is_console = 1
dev-prop: nr = 0
dev-prop: chardev = <null>
dev-prop: name = <null>
port 0, guest on, host off, throttle off
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The USES_X509_AUTH macro is defined in several VNC files,
but not used in all of them. Remove the unused definition.
* ui/vnc-auth-sasl.c: Remove USES_X509_AUTH macro
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow client connections for VNC and socket based character
devices to be passed in over the monitor using SCM_RIGHTS.
One intended usage scenario is to start QEMU with VNC on a
UNIX domain socket. An unprivileged user which cannot access
the UNIX domain socket, can then connect to QEMU's VNC server
by passing an open FD to libvirt, which passes it onto QEMU.
{ "execute": "get_fd", "arguments": { "fdname": "myclient" } }
{ "return": {} }
{ "execute": "add_client", "arguments": { "protocol": "vnc",
"fdname": "myclient",
"skipauth": true } }
{ "return": {} }
In this case 'protocol' can be 'vnc' or 'spice', or the name
of a character device (eg from -chardev id=XXXX)
The 'skipauth' parameter can be used to skip any configured
VNC authentication scheme, which is useful if the mgmt layer
talking to the monitor has already authenticated the client
in another way.
* console.h: Define 'vnc_display_add_client' method
* monitor.c: Implement 'client_add' command
* qemu-char.c, qemu-char.h: Add 'qemu_char_add_client' method
* qerror.c, qerror.h: Add QERR_ADD_CLIENT_FAILED
* qmp-commands.hx: Declare 'client_add' command
* ui/vnc.c: Implement 'vnc_display_add_client' method
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A future patch will introduce a situation where different
clients may have different authentication schemes set.
When a new client arrives, copy the 'auth' and 'subauth'
fields from VncDisplay into the client's VncState, and
use the latter in all authentication functions.
* ui/vnc.h: Add 'auth' and 'subauth' to VncState
* ui/vnc-auth-sasl.c, ui/vnc-auth-vencrypt.c,
ui/vnc.c: Make auth functions pull auth scheme
from VncState instead of VncDisplay
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Daniel P. Berrange sent a libvirt's patch to support
reboots with the QEMU driver. He implements it in
json model like this:
1. add -no-shutdown in the qemu's option:
qemu -no-shutdown xxxx
2. shutdown the vm by monitor command system_powerdown
3. wait for shutdown event
4. reset the vm by monitor command system_reset
no_shutdown will be reset to 0 if the vm is powered down.
We only can reboot the vm once.
If no_shutdown is not reset to 0, we can reboot the vm
many times.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[I've sent this patch couple of months ago and noticed it
didn't make it's way in - so I'm sending it again]
It is possible to create CPU-less NUMA nodes, node amount shouldn't be
limited by amount of CPUs.
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These addresses have been passed through pci_to_cpu_addr,
and thus need to be full target_phys_addr_t.
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The only way for chardev drivers to communicate an error was to return a NULL
pointer, which resulted in an error message that said _that_ something went
wrong, but not _why_.
This patch changes the interface to return 0/-errno and updates
qemu_chr_open_opts to use strerror to display a more helpful error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A timer that wakes up every millisecond puts a lot of stress on the
iothread. The large amount of IPIs causes very high context switch
activity, making emulation slow and the UI unusable. This is by the
way the same reason why the Windows timers were switched to dynticks.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This conveys the intention better, and scales to more than >1
threads contending the mutex with the iothread (as long as all
of them have a "quiescent point" like the TCG thread has).
Also, on Mac OS X the fair_mutex somehow didn't work as intended
and deadlocked.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support commas in the parameter list of multiboot modules as well as for the
kernel command line, by using double commas (via get_opt_value()).
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Serial and parallel devices created with -device are not reported in
the PIIX4 configuration space, and are hence not picked up by the DSDT.
This upsets Windows, which hides them altogether from the guest.
To avoid this, check at the end of machine initialization whether the
corresponding I/O ports have been registered. The new function in
ioport.c does this; this also requires a tweak to isa_unassign_ioport.
I left the comment in piix4_pm_initfn since the registers I moved do
seem to match the 82371AB datasheet. There are some quirks though.
We are setting this bit:
"Device 8 EIO Enable (EIO_EN_DEV8)—R/W. 1=Enable PCI access to the
device 8 enabled I/O ranges to be claimed by PIIX4 and forwarded
to the ISA/EIO bus. 0=Disable. The LPT_MON_EN must be set to enable
the decode."
but not LPT_MON_EN (bit 18 at 50h):
LPT Port Enable (LPT_MON_EN)—R/W. 1=Enable accesses to parallel
port address range (LPT_DEC_SEL) to generate a device 8 (parallel
port) decode event. 0=Disable.
We're also setting the LPT_DEC_SEL field (that's the 0x60 written to
63h) to 11, which means reserved, rather than to 01 (378h-37Fh).
Likewise we're not setting SA_MON_EN, SB_MON_EN (respectively bit 14
and bit 16 at address 50h) for the serial ports. However, we're setting
COMA_DEC_SEL and COMB_DEC_SEL correctly, unlike the corresponding register
for the parallel port.
All these fields are left as they are, since they are probably only
meant to be used in the DSDT.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new binary and generation directory to the gitignore file
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop the open-coded MAC assignment from net_init_nic and replace it with
standard qemu_macaddr_default_if_unset which is also used by qdev. That
avoid creating colliding MACs when instantiating NICs via different
mechanisms.
This change requires to store the MAC as MACAddr in NICInfo, and the
remaining nd_table users need to be updated.
Based on suggestion by Peter Maydell.
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Include the client type name into the output of 'info network'. The
result looks like this:
(qemu) info network
VLAN 0 devices:
rtl8139.0: type=nic,model=rtl8139,macaddr=52:54:00:12:34:57
Devices not on any VLAN:
virtio-net-pci.0: type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
\ network1: type=tap,fd=5
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Position entries of net_client_types according to the corresponding
values of NET_CLIENT_TYPE_*. The array size is now defined by
NET_CLIENT_TYPE_MAX. This will allow to obtain entries based on type
value in later patches.
At this chance rename NET_CLIENT_TYPE_SLIRP to NET_CLIENT_TYPE_USER for
the sake of consistency.
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Improve the layout when listing non-vlan clients via 'info network'. The
result looks like this:
(qemu) info network
Devices not on any VLAN:
orphan: net=10.0.2.0, restricted=n
virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:56
\ network2: fd=5
e1000.0: model=e1000,macaddr=52:54:00:12:34:57
\ network1: net=10.0.2.0, restricted=n
rtl8139.0: model=rtl8139,macaddr=52:54:00:12:34:58
ie. peers are grouped, orphans are listed as before.
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this
feature to forward guest pings to the outer world. The host admin has to
set the ping_group_range in order to grant access to those sockets. To
allow ping for the users group (GID 100):
echo 100 100 > /proc/sys/net/ipv4/ping_group_range
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Recent smb daemons tend to terminate themselves via a process group
SIGTERM. If the daemon is still in qemu's group by that time, qemu will
die as well. Avoid this by always pushing fork_exec processes into a
group of their own, not just (unused) type 2 execs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of accepting every DHCP/BOOTP and TFTP packet, only invoke the
built-in servers if the target is the virtual host.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All other boolean arguments accept on|off - except for slirp's restrict.
Fix that while still accepting the formerly allowed yes|y|no|n, but
reject everything else. This avoids accidentally allowing external
connections because syntax errors were so far interpreted as
'restrict=no'.
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This aligns the code to what the documentation claims: Allow everything
but requests that would have to be routed outside of the virtual LAN.
So we need to drop the unneeded IP-level filter, allow TFTP requests,
and add the missing protocol-level filter to ICMP.
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Superseded by -machine. Therefore, this patch removes -M from the help
list and pushes -machine at the same place in the output.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-machine somehow suggests that it selects the machine, but it doesn't.
Fix that before this command is set in stone.
Actually, -machine should supersede -M and allow to introduce arbitrary
per-machine options to the command line. That will change the internal
realization again, but we will be able to keep the user interface
stable.
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
