Pre-setup for raspberry pi 4 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-4-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pre setup for BCM2838 introduction
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-2-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reimplement qemu_register_reset() via qemu_register_resettable().
We define a new LegacyReset object which implements Resettable and
defines its reset hold phase method to call a QEMUResetHandler
function. When qemu_register_reset() is called, we create a new
LegacyReset object and add it to the simulation_reset
ResettableContainer. When qemu_unregister_reset() is called, we find
the LegacyReset object in the container and remove it.
This implementation of qemu_unregister_reset() means we'll end up
scanning the ResetContainer's list of child objects twice, once
to find the LegacyReset object, and once in g_ptr_array_remove().
In theory we could avoid this by having the ResettableContainer
interface include a resettable_container_remove_with_equal_func()
that took a callback method so that we could use
g_ptr_array_find_with_equal_func() and g_ptr_array_remove_index().
But we don't expect qemu_unregister_reset() to be called frequently
or in hot paths, and we expect the simulation_reset container to
usually not have many children.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-9-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Implement new functions qemu_register_resettable() and
qemu_unregister_resettable(). These are intended to be
three-phase-reset aware equivalents of the old qemu_register_reset()
and qemu_unregister_reset(). Instead of passing in a function
pointer and opaque, you register any QOM object that implements the
Resettable interface.
The implementation is simple: we have a single global instance of a
ResettableContainer, which we reset in qemu_devices_reset(), and
the Resettable objects passed to qemu_register_resettable() are
added to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-8-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Implement a ResetContainer. This is a subclass of Object, and it
implements the Resettable interface. The container holds a list of
arbitrary other objects which implement Resettable, and when the
container is reset, all the objects it contains are also reset.
This will allow us to have a 3-phase-reset equivalent of the old
qemu_register_reset() API: we will have a single "simulation reset"
top level ResetContainer, and objects in it are the equivalent of the
old QEMUResetHandler functions.
The qemu_register_reset() API manages its list of callbacks using a
QTAILQ, but here we use a GPtrArray for our list of Resettable
children: we expect the "remove" operation (which will need to do an
iteration through the list) to be fairly uncommon, and we get simpler
code with fewer memory allocations.
Since there is currently no listed owner in MAINTAINERS for the
existing reset-related source files, create a new section for
them, and add these new files there also.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-7-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Add the usual boilerplate license/copyright comment to reset.h (using
the text from reset.c), and document the existing functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240220160622.114437-6-peter.maydell@linaro.org
We have an OBJECT_DEFINE_TYPE_EXTENDED macro, plus several variations
on it, which emits the boilerplate for the TypeInfo and ensures it is
registered with the type system. However, all the existing macros
insist that the type being defined has its own FooClass struct, so
they aren't useful for the common case of a simple leaf class which
doesn't have any new methods or any other need for its own class
struct (that is, for the kind of type that OBJECT_DECLARE_SIMPLE_TYPE
declares).
Pull the actual implementation of OBJECT_DEFINE_TYPE_EXTENDED out
into a new DO_OBJECT_DEFINE_TYPE_EXTENDED which parameterizes the
value we use for the class_size field. This lets us add a new
OBJECT_DEFINE_SIMPLE_TYPE which does the same job as the various
existing OBJECT_DEFINE_*_TYPE_* family macros for this kind of simple
type, and the variant OBJECT_DEFINE_SIMPLE_TYPE_WITH_INTERFACES for
when the type will implement some interfaces.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240220160622.114437-5-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Remove last two includes of hw/ide/intarnal.h outside of hw/ide and
replace them with newly added public header to allow moving internal.h
into hw/ide to really stop exposing it.
Fixes: a11f439a0e (hw/ide: Stop exposing internal.h to non-IDE files)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240223142633.933694E6004@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
PCMachineClass introduces the attribute into the class hierarchy and sets it to
true. There is no sub class overriding the attribute. Commit 30d2a17b46
"hw/i386: Remove the deprecated machines 0.12 up to 0.15" removed the last
overrides of this attribute. The attribute is now unneeded and can be removed.
Fixes: 30d2a17b46 "hw/i386: Remove the deprecated machines 0.12 up to 0.15"
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribute is of type PCIBus; reflect that in the name. It will also make the
next change more intuitive.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than taking a QOM name which has to be resolved, let's pass the parent
directly as pointer. This simplifies the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240224135851.100361-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Inline the sole remaining use, which is for the -usbdevice command line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-9-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
object_resolve_type_unambiguous provides a useful functionality, that
is currently emulated for example by usb_bus_find(). Move it to core
code and add error reporting for increased generality.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-2-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The nubus-virtio-mmio device is a Nubus card that contains a set of 32 virtio-mmio
devices and a goldfish PIC similar to the m68k virt machine that can be plugged
into the m68k q800 machine.
There are currently a number of drivers under development that can be used in
conjunction with this device to provide accelerated and/or additional hypervisor
services to 68k Classic MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240111102954.449462-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Whilst 128k is more than enough for a typical Declaration ROM, a C compiler
configured to produce an unstripped debug binary can generate a ROM image that
exceeds this limit. Increase the maximum size to 1Mb to help make life easier
for developers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240111102954.449462-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
sysbus_address_space() is not more used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240216153517.49422-7-philmd@linaro.org>
One of the functions of the ChipTOD is to transfer TOD to the Core
(aka PC - Pervasive Core) timebase facility.
The ChipTOD can be programmed with a target address to send the TOD
value to. The hardware implementation seems to perform this by
sending the TOD value to a SCOM address.
This implementation grabs the core directly and manipulates the
timebase facility state in the core. This is a hack, but it works
enough for now. A better implementation would implement the transfer
to the PnvCore xscom register and drive the timebase state machine
from there.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Wire the ChipTOD model to powernv9 and powernv10 machines.
Suggested-by-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ChipTOD (for Time-Of-Day) is a chip pervasive facility in IBM POWER
(powernv) processors that keeps a time of day clock.
In particular for this model are facilities that initialise and start
the time of day clock, and that synchronise that clock to cores on the
chip, and to other chips. In this way, all cores on all chips can
synchronise timebase (TB).
This model implements functionality sufficient to run the skiboot
chiptod synchronisation procedure (with the following core timebase
state machine implementation). It does not modify the TB in the cores
where the real hardware would, because the QEMU ppc timebase
implementation is always synchronised acros all cores.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This part of the patchset connects the nest1 chiplet model to p10 chip.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The N1 chiplet handle the high speed i/o traffic over PCIe and others.
The N1 chiplet consists of PowerBus Fabric controller,
nest Memory Management Unit, chiplet control unit and more.
This commit creates a N1 chiplet model and initialize and realize the
pervasive chiplet model where chiplet control registers are implemented.
This commit also implement the read/write method for the powerbus scom
registers
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
A POWER10 chip is divided into logical units called chiplets. Chiplets
are broadly divided into "core chiplets" (with the processor cores) and
"nest chiplets" (with everything else). Each chiplet has an attachment
to the pervasive bus (PIB) and with chiplet-specific registers. All nest
chiplets have a common basic set of registers and This model will provide
the registers functionality for common registers of nest chiplet (Pervasive
Chiplet, PB Chiplet, PCI Chiplets, MC Chiplet, PAU Chiplets)
This commit implement the read/write functions of chiplet control registers.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tests the following for both P9 and P10:
- I2C master POR status
- I2C master status after immediate reset
Tests the following for powernv10-ranier only:
- Config pca9552 hotplug device pins as inputs then
Read the INPUT0/1 registers to verify all pins are high
- Connected GPIO pin tests of P10 PCA9552 device. Tests
output of pins 0-4 affect input of pins 5-9 respectively.
- PCA9554 GPIO pins test. Tests input and ouput functionality.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Specs are available here:
https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf
This is a simple model supporting the basic registers for GPIO
mode. The device also supports an interrupt output line but the
model does not yet support this.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The Power Hypervisor code expects to see a pca9552 device connected
to the 3rd PNV I2C engine on port 1 at I2C address 0x63 (or left-
justified address of 0xC6). This is used by hypervisor code to
control PCIe slot power during hotplug events.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Allow external devices to drive pca9552 input pins by adding
input GPIO's to the model. This allows a device to connect
its output GPIO's to the pca9552 input GPIO's.
In order for an external device to set the state of a pca9552
pin, the pin must first be configured for high impedance (LED
is off). If the pca9552 pin is configured to drive the pin low
(LED is on), then external input will be ignored.
Here is a table describing the logical state of a pca9552 pin
given the state being driven by the pca9552 and an external device:
PCA9552
Configured
State
| Hi-Z | Low |
------+------+-----+
External Hi-Z | Hi | Low |
Device ------+------+-----+
State Low | Low | Low |
------+------+-----+
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
spapr_irq_init currently uses existing macro SPAPR_XIRQ_BASE to refer to
the range of CPU IPIs during initialization of nr-irqs property.
It is more appropriate to have its own define which can be further
reused as appropriate for correct interpretation.
Suggested-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since 'softmmu' is quite a loaded term in QEMU, rename the vhyp MMU
facilities to use the vhyp_mmu_ prefix rather than softmmu_.
vhyp_mmu_ is chosen because the code that manipulates the hash table
via guest software hypercalls is QEMU's implementation of the PAPR
hypervisor interface, called vhyp.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[npiggin: Pick a different name, explain it in changelog.]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
- Remove sysbus_add_io (Phil)
- Build PPC 4xx PCI host bridges once (Phil)
- Display QOM path while debugging SMBus targets (Joe)
- Simplify x86 PC code (Bernhard)
- Remove qemu_[un]register_reset() calls in x86 PC CMOS (Peter)
- Fix wiring of ICH9 LPC interrupts (Bernhard)
- Split core IDE as device / bus / dma (Thomas)
- Prefer QDev API over QOM for devices (Phil)
- Fix invalid use of DO_UPCAST() in Leon3 (Thomas)
-----BEGIN PGP SIGNATURE-----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=+h2O
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240222' of https://github.com/philmd/qemu into staging
Misc HW patch queue
- Remove sysbus_add_io (Phil)
- Build PPC 4xx PCI host bridges once (Phil)
- Display QOM path while debugging SMBus targets (Joe)
- Simplify x86 PC code (Bernhard)
- Remove qemu_[un]register_reset() calls in x86 PC CMOS (Peter)
- Fix wiring of ICH9 LPC interrupts (Bernhard)
- Split core IDE as device / bus / dma (Thomas)
- Prefer QDev API over QOM for devices (Phil)
- Fix invalid use of DO_UPCAST() in Leon3 (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXXQ1IACgkQ4+MsLN6t
# wN4e2xAAig55EJh/JwpdGx55rFUab3Ay22jgXrExmBir8hzhyzssY+RUj2ALRa5e
# T26kxCEqiuT549FtWm/ci6kVax0QD6bqz/6/j451XB9469Z/3BDOV5rhsqF6zlr5
# BMbyC8PKnMUluG8v1ZuRjC3m2lK3ZvkVnZtj7SZUR50ssEnR32fVIziN14/OYkts
# 2B24sLrnLBfvyatMRsuFqGWrcbtMdnwNpjenGfDPOTF33W1sxTQ8GSvx1RV32l69
# Yr/iCVoCl+rGxbLLP1TwqtOwzk32p8RsbIt6rWMqVMv/p5F6ezFeiOk7VHnnEJRH
# e7TPxt4XeLGPARMQLT3gQh0MGIIodanSHePRBkczuNmKYTJrz+5jMu2Qg4MmMUE/
# TV0fKgdjh/edhAOHzJgZqLmNV71icl8WBjfsw2qT4ZwgJzWq7YM2/XZKkeWhk2nQ
# whLxfgiU4PNJ6vHhebJNjOovCYQTK2FbXR+PvVn5FEbH4CuFr8mqkYc+vNYM9dLA
# b7uMk1H8kcb5+kqfPPU2lVd1wO7uqhxYOYU2O9nYq8aw7ioLoLeEdj2IicLtrA/H
# GMtyA5cYeabeRzSXF30tM2AR1uQ/e4Z7oNxW6z3GVK1NrQtKilqPgMKut8uWYvva
# crJLpRQhGiY3sDrIkkCcAHzv256dZaJNLR1KPViaHOyVPZV+x2s=
# =+h2O
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 22 Feb 2024 12:51:30 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20240222' of https://github.com/philmd/qemu: (32 commits)
hw/sparc/leon3: Fix wrong usage of DO_UPCAST macro
hw/ide: Stop exposing internal.h to non-IDE files
hw/ide: Remove the include/hw/ide.h legacy file
hw/ide: Move IDE bus related definitions to a new header ide-bus.h
hw/ide: Move IDE device related definitions to ide-dev.h
hw/ide: Move IDE DMA related definitions to a separate header ide-dma.h
hw/ide: Split qdev.c into ide-bus.c and ide-dev.c
hw/ide: Add the possibility to disable the CompactFlash device in the build
hw/acpi/ich9_tco: Include missing 'migration/vmstate.h' header
hw/acpi/cpu: Use CPUState typedef
hw/acpi: Include missing 'qapi/qapi-types-acpi.h' generated header
hw/isa/meson.build: Sort alphabetically
hw/i386/pc_q35: Populate interrupt handlers before realizing LPC PCI function
hw/i386/pc_sysfw: Use qdev_is_realized() instead of QOM API
hw/i386/pc_sysfw: Inline pc_system_flash_create() and remove it
hw/i386/pc: Confine system flash handling to pc_sysfw
hw/i386/pc: Defer smbios_set_defaults() to machine_done
hw/i386/pc: Merge pc_guest_info_init() into pc_machine_initfn()
hw/i386/x86: Turn apic_xrupt_override into class attribute
hw/i386/pc: Do pc_cmos_init_late() from pc_machine_done()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/hw/i386/pc.h
include/hw/ide/internal.h is currently included by include/hw/ide/pci.h
and thus exposed to a lot of files that are not part of the IDE subsystem.
Stop including internal.h there and use the appropriate new headers
ide-bus.h and ide-dma.h instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-8-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There was only one prototype left in this legacy file. Move it to
ide-dev.h to finally get rid of it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-7-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Let's consolidate the public IDE bus related functions in a separate
header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220085505.30255-6-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Untangle internal.h by moving public IDE device related
definitions to ide-dev.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220085505.30255-5-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These definitions are required outside of the hw/ide/ code, too,
so lets's move them from internal.h to a new header called ide-dma.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220085505.30255-4-thuth@redhat.com>
[PMD: Use IDEDMAOps typedef in struct IDEDMA]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
For distros like downstream RHEL, it would be helpful to allow to disable
the CompactFlash device. For making this possible, we need a separate
Kconfig switch for this device, and the code should reside in a separate
file. Let's also introduce a new header ide-dev.h which can be used to
collect definitions related to IDE devices.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20240220085505.30255-2-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We need the VMStateDescription structure definition from
"migration/vmstate.h" in order to declare vmstate_tco_io_sts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240219141412.71418-4-philmd@linaro.org>
ACPIOSTInfo is a QAPI generated structure:
$ git grep -w ACPIOSTInfo
qapi/acpi.json:81:# @ACPIOSTInfo:
qapi/acpi.json:99:{ 'struct': 'ACPIOSTInfo',
qapi/acpi.json:109:# Return a list of ACPIOSTInfo for devices that support status
Include the "qapi/qapi-types-acpi.h" header to avoid the following
errors when including "hw/acpi/cpu.h" or "hw/acpi/memory_hotplug.h"
elsewhere:
include/hw/acpi/cpu.h:67:52: error: unknown type name 'ACPIOSTInfoList'
void acpi_cpu_ospm_status(CPUHotplugState *cpu_st, ACPIOSTInfoList ***list);
^
include/hw/acpi/memory_hotplug.h:51:55: error: unknown type name 'ACPIOSTInfoList'
void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240219141412.71418-2-philmd@linaro.org>
Rather than distributing PC system flash handling across three files, let's
confine it to one. Now, pc_system_firmware_init() creates, configures and cleans
up the system flash which makes the code easier to understand. It also avoids
the extra call to pc_system_flash_cleanup_unused() in the Xen case.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Handling most of smbios data generation in the machine_done notifier is similar
to how the ARM virt machine handles it which also calls smbios_set_defaults()
there. The result is that all pc machines are freed from explicitly worrying
about smbios setup.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Resolves redundant code in the piix and q35 machines.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribute isn't user-changeable and only true for pc-based machines. Turn it
into a class attribute which allows for inlining pc_guest_info_init() into
pc_machine_initfn().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add the two IDE bus BusState pointers to the set we keep in PCMachineState.
This allows us to avoid passing them to pc_cmos_init(), and also will
allow a refactoring of how we call pc_cmos_init_late().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Do not zero-init pcms->idebus[] again]
Message-ID: <20240220160622.114437-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
