For the direct triple faults, i.e. hardware detected and KVM morphed
to VM-Exit, KVM will never lose them. But for triple faults sythesized
by KVM, e.g. the RSM path, if KVM exits to userspace before the request
is serviced, userspace could migrate the VM and lose the triple fault.
A new flag KVM_VCPUEVENT_VALID_TRIPLE_FAULT is defined to signal that
the event.triple_fault_pending field contains a valid state if the
KVM_CAP_X86_TRIPLE_FAULT_EVENT capability is enabled.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220929072014.20705-2-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V TLFS allows for L0 and L1 hypervisors to collaborate on L2's
TLB flush hypercalls handling. With the correct setup, L2's TLB flush
hypercalls can be handled by L0 directly, without the need to exit to
L1.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM kind of supported "extended GVA ranges" (up to 4095 additional GFNs
per hypercall) since the implementation of Hyper-V PV TLB flush feature
(Linux-4.18) as regardless of the request, full TLB flush was always
performed. "Extended GVA ranges for TLB flush hypercalls" feature bit
wasn't exposed then. Now, as KVM gains support for fine-grained TLB
flush handling, exposing this feature starts making sense.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V specification allows to pass parameters for certain hypercalls
using XMM registers ("XMM Fast Hypercall Input"). When the feature is
in use, it allows for faster hypercalls processing as KVM can avoid
reading guest's memory.
KVM supports the feature since v5.14.
Rename HV_HYPERCALL_{PARAMS_XMM_AVAILABLE -> XMM_INPUT_AVAILABLE} to
comply with KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The newly introduced enlightenment allow L0 (KVM) and L1 (Hyper-V)
hypervisors to collaborate to avoid unnecessary updates to L2
MSR-Bitmap upon vmexits.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously, HV_CPUID_NESTED_FEATURES.EAX CPUID leaf was handled differently
as it was only used to encode the supported eVMCS version range. In fact,
there are also feature (e.g. Enlightened MSR-Bitmap) bits there. In
preparation to adding these features, move HV_CPUID_NESTED_FEATURES leaf
handling to hv_build_cpuid_leaf() and drop now-unneeded 'hyperv_nested'.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the first generation of Arch LBR, the max support
Arch LBR depth is 32, both host and guest use the value
to set depth MSR. This can simplify the implementation
of patch given the side-effect of mismatch of host/guest
depth MSR: XRSTORS will reset all recording MSRs to 0s
if the saved depth mismatches MSR_ARCH_LBR_DEPTH.
In most of the cases Arch LBR is not in active status,
so check the control bit before save/restore the big
chunck of Arch LBR MSRs.
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-7-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define Arch LBR bit in XSS and save/restore structure
for XSAVE area size calculation.
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-6-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There're some new features, including Arch LBR, depending
on XSAVES/XRSTORS support, the new instructions will
save/restore data based on feature bits enabled in XCR0 | XSS.
This patch adds the basic support for related CPUID enumeration
and meanwhile changes the name from FEAT_XSAVE_COMP_{LO|HI} to
FEAT_XSAVE_XCR0_{LO|HI} to differentiate clearly the feature
bits in XCR0 and those in XSS.
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-5-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Last Branch Recording (LBR) is a performance monitor unit (PMU)
feature on Intel processors which records a running trace of the most
recent branches taken by the processor in the LBR stack. This option
indicates the LBR format to enable for guest perf.
The LBR feature is enabled if below conditions are met:
1) KVM is enabled and the PMU is enabled.
2) msr-based-feature IA32_PERF_CAPABILITIES is supporterd on KVM.
3) Supported returned value for lbr_fmt from above msr is non-zero.
4) Guest vcpu model does support FEAT_1_ECX.CPUID_EXT_PDCM.
5) User-provided lbr-fmt value doesn't violate its bitmask (0x3f).
6) Target guest LBR format matches that of host.
Co-developed-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220215195258.29149-3-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit b7711471f5 in 2014 we refactored the handling of the x86
vector registers so that instead of separate structs XMMReg, YMMReg
and ZMMReg for representing the 16-byte, 32-byte and 64-byte width
vector registers and multiple fields in the CPU state, we have a
single type (XMMReg, later renamed to ZMMReg) and a single struct
field (xmm_regs). However, in 2017 in commit c97d6d2cdf some of
the old struct types and CPU state fields got added back, when we
merged in the hvf support (which had developed in a separate fork
that had presumably not had the refactoring of b7711471f5), as part
of code handling xsave. Commit f585195ec0 then almost immediately
dropped that xsave code again in favour of sharing the xsave handling
with KVM, but forgot to remove the now unused CPU state fields and
struct types.
Delete the unused types and CPUState fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220412110047.1497190-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SynDbg commands can come from two different flows:
1. Hypercalls, in this mode the data being sent is fully
encapsulated network packets.
2. SynDbg specific MSRs, in this mode only the data that needs to be
transfered is passed.
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220216102500.692781-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some versions of Windows hang on reboot if their TSC value is greater
than 2^54. The calibration of the Hyper-V reference time overflows
and fails; as a result the processors' clock sources are out of sync.
The issue is that the TSC _should_ be reset to 0 on CPU reset and
QEMU tries to do that. However, KVM special cases writing 0 to the
TSC and thinks that QEMU is trying to hot-plug a CPU, which is
correct the first time through but not later. Thwart this valiant
effort and reset the TSC to 1 instead, but only if the CPU has been
run once.
For this to work, env->tsc has to be moved to the part of CPUArchState
that is not zeroed at the beginning of x86_cpu_reset.
Reported-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Supersedes: <20220324082346.72180-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some AMD processors expose the PKRU extended save state even if they do not have
the related PKU feature in CPUID. Worse, when they do they report a size of
64, whereas the expected size of the PKRU extended save state is 8, therefore
the esa->size == eax assertion does not hold.
The state is already ignored by KVM_GET_SUPPORTED_CPUID because it
was not enabled in the host XCR0. However, QEMU kvm_cpu_xsave_init()
runs before QEMU invokes arch_prctl() to enable dynamically-enabled
save states such as XTILEDATA, and KVM_GET_SUPPORTED_CPUID hides save
states that have yet to be enabled. Therefore, kvm_cpu_xsave_init()
needs to consult the host CPUID instead of KVM_GET_SUPPORTED_CPUID,
and dies with an assertion failure.
When setting up the ExtSaveArea array to match the host, ignore features that
KVM does not report as supported. This will cause QEMU to skip the incorrect
CPUID leaf instead of tripping the assertion.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/916
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Analyzed-by: Yang Zhong <yang.zhong@intel.com>
Reported-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XFD(eXtended Feature Disable) allows to enable a
feature on xsave state while preventing specific
user threads from using the feature.
Support save and restore XFD MSRs if CPUID.D.1.EAX[4]
enumerate to be valid. Likewise migrate the MSRs and
related xsave state necessarily.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-8-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When dynamic xfeatures (e.g. AMX) are used by the guest, the xsave
area would be larger than 4KB. KVM_GET_XSAVE2 and KVM_SET_XSAVE
under KVM_CAP_XSAVE2 works with a xsave buffer larger than 4KB.
Always use the new ioctls under KVM_CAP_XSAVE2 when KVM supports it.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-7-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel introduces XFD faulting mechanism for extended
XSAVE features to dynamically enable the features in
runtime. If CPUID (EAX=0Dh, ECX=n, n>1).ECX[2] is set
as 1, it indicates support for XFD faulting of this
state component.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-5-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kernel allocates 4K xstate buffer by default. For XSAVE features
which require large state component (e.g. AMX), Linux kernel
dynamically expands the xstate buffer only after the process has
acquired the necessary permissions. Those are called dynamically-
enabled XSAVE features (or dynamic xfeatures).
There are separate permissions for native tasks and guests.
Qemu should request the guest permissions for dynamic xfeatures
which will be exposed to the guest. This only needs to be done
once before the first vcpu is created.
KVM implemented one new ARCH_GET_XCOMP_SUPP system attribute API to
get host side supported_xcr0 and Qemu can decide if it can request
dynamically enabled XSAVE features permission.
https://lore.kernel.org/all/20220126152210.3044876-1-pbonzini@redhat.com/
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Message-Id: <20220217060434.52460-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMX TILECFG register and the TMMx tile data registers are
saved/restored via XSAVE, respectively in state component 17
(64 bytes) and state component 18 (8192 bytes).
Add AMX feature bits to x86_ext_save_areas array to set
up AMX components. Add structs that define the layout of
AMX XSAVE areas and use QEMU_BUILD_BUG_ON to validate the
structs sizes.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The extended state subleaves (EAX=0Dh, ECX=n, n>1).ECX[1]
indicate whether the extended state component locates
on the next 64-byte boundary following the preceding state
component when the compacted format of an XSAVE area is
used.
Right now, they are all zero because no supported component
needed the bit to be set, but the upcoming AMX feature will
use it. Fix the subleaves value according to KVM's supported
cpuid.
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220217060434.52460-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
This allows to make PDPTRs part of the migration
stream and thus not reload them after migration which
is against X86 spec.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211101132300.192584-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, we hardcode Hyper-V version id (CPUID 0x40000002) to
WS2008R2 and it is known that certain tools in Windows check this. It
seems useful to provide some flexibility by making it possible to change
this info at will. CPUID information is defined in TLFS as:
EAX: Build Number
EBX Bits 31-16: Major Version
Bits 15-0: Minor Version
ECX Service Pack
EDX Bits 31-24: Service Branch
Bits 23-0: Service Number
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The enlightenment allows to use Hyper-V SynIC with hardware APICv/AVIC
enabled. Normally, Hyper-V SynIC disables these hardware features and
suggests the guest to use paravirtualized AutoEOI feature. Linux-4.15
gains support for conditional APICv/AVIC disablement, the feature
stays on until the guest tries to use AutoEOI feature with SynIC. With
'HV_DEPRECATING_AEOI_RECOMMENDED' bit exposed, modern enough Windows/
Hyper-V versions should follow the recommendation and not use the
(unwanted) feature.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default, KVM allows the guest to use all currently supported Hyper-V
enlightenments when Hyper-V CPUID interface was exposed, regardless of if
some features were not announced in guest visible CPUIDs. hv-enforce-cpuid
feature alters this behavior and only allows the guest to use exposed
Hyper-V enlightenments. The feature is supported by Linux >= 5.14 and is
not enabled by default in QEMU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default, KVM allows the guest to use all currently supported PV features
even when they were not announced in guest visible CPUIDs. Introduce a new
"kvm-pv-enforce-cpuid" flag to limit the supported feature set to the
exposed features. The feature is supported by Linux >= 5.10 and is not
enabled by default in QEMU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On real hardware, on systems that supports SGX Launch Control, those
MSRs are initialized to digest of Intel's signing key; on systems that
don't support SGX Launch Control, those MSRs are not available but
hardware always uses digest of Intel's signing key in EINIT.
KVM advertises SGX LC via CPUID if and only if the MSRs are writable.
Unconditionally initialize those MSRs to digest of Intel's signing key
when CPU is realized and reset to reflect the fact. This avoids
potential bug in case kvm_arch_put_registers() is called before
kvm_arch_get_registers() is called, in which case guest's virtual
SGX_LEPUBKEYHASH MSRs will be set to 0, although KVM initializes those
to digest of Intel's signing key by default, since KVM allows those MSRs
to be updated by Qemu to support live migration.
Save/restore the SGX Launch Enclave Public Key Hash MSRs if SGX Launch
Control (LC) is exposed to the guest. Likewise, migrate the MSRs if they
are writable by the guest.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-11-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 12_1_EAX is an Intel-defined feature bits leaf enumerating
the platform's SGX capabilities that may be utilized by an enclave, e.g.
whether or not an enclave can gain access to the provision key.
Currently there are six capabilities:
- INIT: set when the enclave has has been initialized by EINIT. Cannot
be set by software, i.e. forced to zero in CPUID.
- DEBUG: permits a debugger to read/write into the enclave.
- MODE64BIT: the enclave runs in 64-bit mode
- PROVISIONKEY: grants has access to the provision key
- EINITTOKENKEY: grants access to the EINIT token key, i.e. the
enclave can generate EINIT tokens
- KSS: Key Separation and Sharing enabled for the enclave.
Note that the entirety of CPUID.0x12.0x1, i.e. all registers, enumerates
the allowed ATTRIBUTES (128 bits), but only bits 31:0 are directly
exposed to the user (via FEAT_12_1_EAX). Bits 63:32 are currently all
reserved and bits 127:64 correspond to the allowed XSAVE Feature Request
Mask, which is calculated based on other CPU features, e.g. XSAVE, MPX,
AVX, etc... and is not exposed to the user.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-10-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 12_0_EBX is an Intel-defined feature bits leaf enumerating
the platform's SGX extended capabilities. Currently there is a single
capabilitiy:
- EXINFO: record information about #PFs and #GPs in the enclave's SSA
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-9-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 12_0_EAX is an Intel-defined feature bits leaf enumerating
the CPU's SGX capabilities, e.g. supported SGX instruction sets.
Currently there are four enumerated capabilities:
- SGX1 instruction set, i.e. "base" SGX
- SGX2 instruction set for dynamic EPC management
- ENCLV instruction set for VMM oversubscription of EPC
- ENCLS-C instruction set for thread safe variants of ENCLS
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-8-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add CPUID defines for SGX and SGX Launch Control (LC), as well as
defines for their associated FEATURE_CONTROL MSR bits. Define the
Launch Enclave Public Key Hash MSRs (LE Hash MSRs), which exist
when SGX LC is present (in CPUID), and are writable when SGX LC is
enabled (in FEATURE_CONTROL).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-7-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_get_pic_interrupt() is now unreachable from user-mode,
delete the unnecessary stubs.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-25-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restrict some sysemu-only fpu_helper helpers (see commit
83a3d9c740: "i386: separate fpu_helper sysemu-only parts").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-3-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The feature allows the VMSAVE and VMLOAD instructions to execute in guest mode without
causing a VMEXIT. (APM2 15.33.1)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Writes to cr8 affect v_tpr. This could set or unset an interrupt
request as the priority might have changed.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VGIF provides masking capability for when virtual interrupts
are taken. (APM2)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Moved int_ctl into the CPUX86State structure. It removes some
unnecessary stores and loads, and prepares for tracking the vIRQ
state even when it is masked due to vGIF.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
APM2 requires that VMRUN and VMLOAD canonicalize (sign extend to 63
from 48/57) all base addresses in the segment registers that have been
respectively loaded.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210804113058.45186-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Booting Fedora kernels with -cpu max hangs very early in boot. Disabling
the la57 CPUID bit fixes the problem. git bisect traced the regression to
commit 213ff024a2 (HEAD, refs/bisect/bad)
Author: Lara Lazier <laramglazier@gmail.com>
Date: Wed Jul 21 17:26:50 2021 +0200
target/i386: Added consistency checks for CR4
All MBZ bits in CR4 must be zero. (APM2 15.5)
Added reserved bitmask and added checks in both
helper_vmrun and helper_write_crN.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In this commit CR4_RESERVED_MASK is missing CR4_LA57_MASK and
two others. Adding this lets Fedora kernels boot once again.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20210831175033.175584-1-berrange@redhat.com>
[Removed VMXE/SMXE, matching the commit message. - Paolo]
Fixes: 213ff024a2 ("target/i386: Added consistency checks for CR4", 2021-07-22)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EFER.SVME has to be set, and EFER reserved bits must
be zero.
In addition the combinations
* EFER.LMA or EFER.LME is non-zero and the processor does not support LM
* non-zero EFER.LME and CR0.PG and zero CR4.PAE
* non-zero EFER.LME and CR0.PG and zero CR0.PE
* non-zero EFER.LME, CR0.PG, CR4.PAE, CS.L and CS.D
are all invalid.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-3-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All MBZ bits in CR4 must be zero. (APM2 15.5)
Added reserved bitmask and added checks in both
helper_vmrun and helper_write_crN.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210721152651.14683-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement x86 fcs:fip, fds:fdp.
Trivial x86 watchpoint cleanup.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmDtwQ0dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/GnAf/SYNhdmIuKCWk/uk8
IC0v2sm5KHVFfkfkobQ+04pFB26tX557i2zTtEfj/A5QVlJSvliZowCVIO6JV63N
9oedLSzdqrxRqDb+Mpmkwnam/k5XfrC20V7os17FuZE98u3Jgky8QNs7Uxq0bCBZ
01AKB9HNRFKeY2o55IxPwC7CLtyz3SStJJP28aa5ROYK7MIP303qsI5pezgkHgGo
/qo5GXwHs/Pu4pnFuAJyOfG38wT6uTt7NrAGjTH0VhbAKNMSP/QND+VvxbuCugZR
6MEVeb+rLy+MN4b3dH6kI89JQvQGBCaWZD/eTF5+8UDPj3I8vpRqufRh8l5WukT1
Q2g1zA==
=eqkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-misc-20210713' into staging
Cleanup alpha, hppa, or1k wrt tcg_constant_tl.
Implement x86 fcs:fip, fds:fdp.
Trivial x86 watchpoint cleanup.
# gpg: Signature made Tue 13 Jul 2021 17:36:29 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-misc-20210713:
target/hppa: Clean up DisasCond
target/hppa: Use tcg_constant_*
target/openrisc: Use dc->zero in gen_add, gen_addc
target/openrisc: Cache constant 0 in DisasContext
target/openrisc: Use tcg_constant_tl for dc->R0
target/openrisc: Use tcg_constant_*
target/alpha: Use tcg_constant_* elsewhere
target/alpha: Use tcg_constant_i64 for zero and lit
target/alpha: Use dest_sink for HW_RET temporary
target/alpha: Store set into rx flag
target/i386: Correct implementation for FCS, FIP, FDS and FDP
target/i386: Split out do_fninit
target/i386: Trivial code motion and code style fix
target/i386: Tidy hw_breakpoint_remove
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update FCS:FIP and FDS:FDP according to the Intel Manual Vol.1 8.1.8.
Note that CPUID.(EAX=07H,ECX=0H):EBX[bit 13] is not implemented by
design in this patch and will be added along with TCG features flag
in a separate patch later.
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20210530150112.74411-2-ziqiaokong@gmail.com>
[rth: Push FDS/FDP handling down into mod != 3 case; free last_addr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
