Environment variables like CFLAGS are easy to accidentally change. Meson
warns if that happens, but in a project with a lot of configuration that
is easy to lose. It is also surprising behavior since meson caches -D
options and remembers those on reconfiguration (which we rely on,
since configure options become -D options).
By placing the user-provided CFLAGS, CXXFLAGS and LDFLAGS in the
cross file, we at least get consistent behavior. These environment
variables are still ugly and not really recommended, but there are
distros that rely on them. For the gory details, refer to
https://github.com/mesonbuild/meson/issues/4664.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923092617.1593722-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the CFLAGS, CXXFLAGS or LDFLAGS variables are present in the environment,
any modification made within the configure script is passed down to Meson.
This is particularly undesirable for the "-pie" option, since it overrides
"-shared" and thus messes up the linker flags for shared modules.
Using a separate variable therefore fixes the bug, while clarifying that
the scope of these CFLAGS is just the configure script.
We also do not need to pass those variables in config-host.mak; they
were only used for printing the summary now that all submodules are
built with handwritten Meson rules). For now synthesize CFLAGS in the
configuration summary, the next patch will also pass them in a cleaner
way using the cross file.
Reported-by: Frederic Bezies
Analyzed-by: Toolybird
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923092617.1593722-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build the library via the main meson.build just like for capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libfdt.a, which we wouldn't
do before-hand, and lets us remove the whole recursive make machinery.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the path to the program to scripts/check_sparse.py, which
previously was not included in config-host.mak. Change
scripts/check_sparse.py to work with cgcc, which seems to
work better with sparse 0.6.x.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the individual TARGET_*=y lines with TARGET_ARCH,
similar to how TARGET_BASE_ARCH is handled already.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The config-target.mak files are small constant, we can therefore just
write them down explicitly.
This removes a pretty large part of the configure script, including the
whole logic to detect which accelerators are supported by each target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several CONFIG_* symbols in config-target.mak are easily computed from just
the target name. We do not need them in config-target.mak, and can instead
place them in the config_target dictionary only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move to meson the code to detect the presence of accelerators, and
to define accelerator-specific config-target.h symbols.
The logic for now is duplicated in configure because it is still
in use to build the list of targets (which is in turn used to
create the config-target.mak files). The next patches remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make room for target files in default-configs/targets/
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable s390x, aka SYSZ, in the git submodule build.
Set the capstone parameters for both s390x host and guest.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target-specific about this code, so it
can be added to common_ss. This also requires that the
base capstone dependency be added to common_ss, so that
we get the correct include paths added to CFLAGS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to use a portion of the 4.0 API.
Reject a system library version prior to that.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This branch contains a number of improvements over master,
including making all of the disassembler data constant.
We are skipping past the 4.0 branchpoint, which changed
the location of the includes within the source directory.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.
Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files". Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.
Instead, build the library via the main meson.build.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand. In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to have a common set of commands for all types of block exports.
Currently, this is only NBD, but we're going to add more types.
This patch adds the basic BlockExport and BlockExportDriver structs and
a QMP command block-export-add that creates a new export based on the
given BlockExportOptions.
qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The order of the add_project_link_arguments calls impacts which
arguments are placed between --start-group and --end-group.
OSS-Fuzz coverage builds seem to just add these to CFLAGS:
-fprofile-instr-generate -fcoverage-mapping pthread -Wl,--no-as-needed
-Wl,-ldl -Wl,-lm Wno-unused-command-line-argument
The -Wl,-ldl flag that is enough to shift the fork_fuzz.ld linker-script
back into the linker group. Move the linker-script meson call before the
other calls to make sure the flag is placed correctly.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200909220516.614222-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the function that will compute a relocated version of the
directories in CONFIG_QEMU_*DIR and CONFIG_QEMU_*PATH.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the exec_dir cannot be retrieved, just assume it's the installation
directory that was specified at configure time. This makes it simpler
to reason about what the callers will do if they get back an empty
path.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that the "real" support is reported. A configuration like
--disable-system --enable-kvm will report "no" for "KVM support" because
no KVM-supported target is being compiled.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This does not have any effect on Meson's behavior itself, since "meson test"
always rebuilds everything (that is one reason why we are not using it...).
However, mtest2make can use this information to do a selective rebuild
for the requested suite.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While detection of the framework was already there, moving
the option allows for better error reporting.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because LIBS is not used anymore, tcmalloc/jemalloc does
not work with binaries whose description is in Meson.
The fix is simply to move them to Meson too.
For consistency with other configure options, specifying
--enable-malloc-trim together with --enable-{tc,je}malloc
becomes a fatal error.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libmultipath has a dependency on libdevmapper, so
include it as well when static linking. It seems that
the rabbit hole ends there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the first compiler/linker test that has been moved to Meson.
Add more section headings to keep things clearer.
This also fixes static linking to libmpathpersist, which has a
dependency on libmultipath but no pkg-config file to describe it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QEMU_GA_MSI_ENABLED config-host.mak variable is emitted by
./configure. meson.build actually checks for CONFIG_QGA_MSI_ENABLED:
summary_info += {'QGA MSI support': config_host.has_key('CONFIG_QGA_MSI_ENABLED')}
Rename QEMU_GA_MSI_ENABLED to CONFIG_QGA_MSI for consistency with
CONFIG_QGA_VSS. Also use 'y' instead of 'yes' for consistency.
This fixes the feature summary printed by meson.build.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200914095231.621068-4-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the variable is used for path concatenation, the result would
ignore the prefix directory altogether.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We no longer use the generated texinfo format documentation,
so delete the code that generates it, and the test case for
the generation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The automatic dependency handling for Sphinx manuals only makes the output
depend on the input documentation files. This means that if you edit
the Python source of an extension then the documentation won't be
rebuilt.
Create a list of all the source files for the extensions and add
it to the dependencies for the manuals. This is similar to how we
handle the qapi_gen_depends list.
Because we don't try to identify which manuals are using which
Sphinx extensions, a change to the source of one extension will
always rebuild the entire manual set, not merely the manuals
which have changed. This is acceptable because we don't change
the extensions all that often.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-15-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Re rebuilding the enitre manual set being acceptable "because we
don't change the extensions all that often": we also rebuild it when
the QAPI generator code the qapidoc extension depends on changes.
This will inconvenience QAPI developers. Can't be helped now.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We're going to want to use SPHINX_ARGS in both docs/meson.build
and tests/qapi-schema/meson.build. Move the definition up to the
top level file so it is available to both subdirectories.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-14-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert qemu-qmp-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-qmp-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
Again, we drop the direct link from index.html.in now that
the QMP ref is part of the interop manual.
This commit removes the code from the root meson.build file that
handled the various Texinfo-based outputs, because we no longer
generate any documentation except for the Sphinx HTML manuals and the
manpages, and the code can't handle having an empty list of files
to process.. We'll do further cleanup of the remainders of
Texinfo support in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added, "make html" fixed,
storage-daemon/qapi/meson.build updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert qemu-ga-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-ga-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
As the GA ref is now part of the Sphinx 'interop' manual,
we can delete the direct link from index.html.in.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-9-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Following the same logic as for vhost-net-user and vhost-kernel,
enable vhost-net if vhost-net-vdpa is enabled and vhost-net is not
explicitly disabled.
See 299e6f19b3 ("vhost-net: revamp configure logic")
Autoselect VHOST if VHOST_VDPA is set
See 21c6b0c87e ("configure: simplify vhost condition with Kconfig")
See 2becc36a3e ("meson: infrastructure for building emulators"
Problems can be triggered using;
... --enable-vhost-vdpa --disable-vhost-user --disable-vhost-kernel ...
Fixes: 108a64818e ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: lulu@redhat.com
Cc: pbonzini@redhat.com
Cc: marcandre.lureau@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200924210023.160679-1-lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'static build:' must display value of CONFIG_STATIC rather than value of
CONFIG_TOOLS.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200917140700.673171-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-14-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use all config symbols not only the host ones.
Needed to make sure device configs like CONFIG_QXL
are used for modules too.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-3-kraxel@redhat.com
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9aa4YACgkQIeENKd+X
cFTJjgf5ASfFIO5HqP1l80/UM5Pswyq0IROZDq0ItZa6U4EPzLXoE2N0POriIj4h
Ds2JbMg0ORDqY0VbSxHlgYHMgJ9S6cuVOMnATsPG0d2jaJ3gSxLBu5k/1ENqe+Vw
sSYXZv5uEAUfOFz99zbuhKHct5HzlmBFW9dVHdflUQS+cRgsSXq27mz1BvZ8xMWl
lMhwubqdoNx0rOD3vKnlwrxaf54DcJ2IQT3BtTCjEar3tukdNaLijAuwt2hrFyr+
IwpeFXA/NWar+mXP3M+BvcLaI33j73/ac2+S5SJuzHGp/ot5nT5gAuq3PDEjHMeS
t6z9Exp776VXxNE2iUA5NB65Yp3/6w==
=07oA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging
This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv
# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/riscv/trace-events
Before the change missing SDL was reported as:
../meson.build:253:4: ERROR: Expected 1 arguments, got 2.
After the error as:
../meson.build:258:4: ERROR: Problem encountered: sdl-image required, but SDL was not found
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: "Marc-André Lureau" <marcandre.lureau@redhat.com>
CC: "Philippe Mathieu-Daudé" <philmd@redhat.com>
CC: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908074016.2593596-1-slyfox@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_gpio model to hw/gpio directory.
Note this also removes the trace-events in the hw/riscv directory,
since gpio is the only supported trace target in that directory.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit c7f419f584 moved softmmu-only files out of the root
directory, but forgot to move the trace events, which should
no longer be generated to "trace-root.h". Fix that by adding
softmmu/trace-events.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-id: 20200805130221.24487-1-philmd@redhat.com
[Rebased onto meson.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Shell scripts are not easily invoked from the build process
on MSYS, so convert undefsym.sh to a python script.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200902170054.810-3-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, the fuzzer-linker script should be specified outside
any --start-group/--end-group pairs. We need this on oss-fuzz, where
partially applying the linker-script results in a linker failure
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The opengl compilation flags were added to QEMU_CFLAGS. We do not
want them to be added to all compilation commands, so export them
also via OPENGL_CFLAGS rather than via QEMU_CFLAGS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The glib compilation flags were added to QEMU_CFLAGS. While we still
want them to be added to all compilation commands (at least for now),
do that via GLIB_CFLAGS rather than via QEMU_CFLAGS. This shows that
glib is a special case and makes it clearer that QEMU_CFLAGS is only
about compiler commands and not dependencies.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need anymore to produce config-all-devices.mak, compute
the resulting dictionary directly instead of going through grepy.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since there is not minimum version specified, and it's a test-only
dependency, it's fair to depend on a version that ships with a .pc I
suppose.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the variable to be more explicit. A further clean-up patch will
move the actual to dependency check to meson entirely.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson automatically adds "-undefined dynamic_lookup" to
shared_module build targets; b_lundef is only needed for
executables. Therefore, we can remove this option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
check-block has its own test harness, unlike every other test. If
we capture its output, as is in general nicer to do without V=1,
there will be no sign of progress. So for lack of a better option
just move the invocation of the test back to Makefile rules.
As a side effect, this will also fix "make check" in --disable-tools
builds, as they were trying to run qemu-iotests without having
made qemu-img before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If nettle is disabled and gcrypt enabled, the compiler and linker flags
needed for gcrypt are not passed.
Gnutls was also not added as a dependancy when gcrypt is enabled.
Attempting to add the library dependencies at the same time as the
source dependencies is error prone, as there are alot of different
rules for picking which sources to use, and some of the source files
use code level conditionals intead. It is thus clearer to add the
library dependencies separately.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200901133050.381844-2-berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Disabling these parts are sufficient to get the qemu-nbd program
compiling in a Windows build.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200825103850.119911-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We do not need to ask cmake for the dependencies, so just use the
pkg-config mechanism. Keep "auto" for SDL so that it tries using
sdl-config too.
The documentation is adjusted to use SDL2_image as the example,
rather than SDL which does not use the "pkg-config" method.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200826110419.528931-9-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_mandir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Use the pre-prefixed meson mandir option instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_docdir is 'c:\Program Files\QEMU\'
which is not recognized as being an absolute path, and meson will end up
adding the prefix again.
Add an option to pass docdir location to meson, pre-prefixed like we do
with other directories, build qemu_docdir with the common suffix and use
that instead of config_host['qemu_docdir'].
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson includes the same logic that tries to look for -lz if
pkg-config (and cmake) cannot find zlib. The undocumented
--disable-zlib-test option becomes a no-op.
There is still an instance of "-lz" in the LIBS directory.
It will go away as soon as tests are converted to meson,
because the zlib dependency does not propagate from libblock.fa
to the Makefile-build unit tests.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure used to probe for SDL2_image in sdl_image_probe (). Meson
should do the same.
This fixes the following error on my system:
Run-time dependency sdl2 found: YES 2.0.8
Found CMake: /usr/bin/cmake (3.17.0)
Run-time dependency sdl-image found: NO (tried pkgconfig and cmake)
../qemu-master/meson.build:256:2: ERROR: Dependency "sdl-image" not
found, tried pkgconfig and cmake
A full log can be found at /home/ruemelin/rpmbuild/BUILD
/qemu-5.1.50-build/meson-logs/meson-log.txt
ERROR: meson setup failed
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200829104158.7461-1-vr_qemu@t-online.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dunno why the default is set to "always". IMHO it should be "auto",
i.e. only colorize in case stdout goes to a terminal. Cluttering
logfiles and confusing compiler message parsers with terminal control
sequences is not nice ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows paths result in command lines like "-isystemC:/msys64/..." that
are not recognized by GCC. "include_type: 'system'" was only included
in an attempt to fix the -Wundef warnings in SDL 2.0.8, but it was not
effective. Therefore we can fix this by remove the include_type.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SDL is only used for system emulation; avoid spurious warnings for
static --disable-system emulation by skipping the detection of
the library if there are no system emulation targets.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When pixman is not installed (or too old), but virglrenderer is available
and "configure" has been run with "--disable-system", the build currently
aborts when trying to compile vhost-user-gpu (since it requires pixman).
Let's skip the build of vhost-user-gpu when pixman is not installed or
too old. Instead of adding CONFIG_PIXMAN, it is simpler to move the
detection to pixman.
Based on a patch by Thomas Huth. <thuth@redhat.com>
Fixes: 9b52b17ba5 ("configure: Allow to build tools without pixman")
Reported-by: Rafael Kitover <rkitover@gmail.com>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The daxctl library needs to be linked against when daxctl is asked for
in configure.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before switching to the meson build system, we used to compile qemu-nbd
for macOS, too, which is especially important for running the iotests
there. Commit b7c70bf2c5 disabled it by accident, since it did not take
into consideration that the $bsd variable in the configure script was
also set to "yes" on macOS. Fix it by enabling qemu-nbd on all systems
but Windows now instead (which was likely the original intention of the
old code in the configure script).
Fixes: b7c70bf2c5 ("meson: qemu-{img,io,nbd}")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "exe_name" variable was renamed to exe['name'], so systemtap
files fail to build.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-keymap is not needed with linux-user, so disable it by default if
tools and system are disabled (tools are disabled by default with linux-user).
Avoid this error with statically linked binaries:
Linking target qemu-keymap
/usr/bin/ld: cannot find -lxkbcommon
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20200824152430.1844159-3-laurent@vivier.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note that sl and sv keymaps were not created by qemu-keymap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson warns if xgettext is not found. In the future we may want to add
a required argument to i18n.gettext(); in the meanwhile, I am adding a
--enable-gettext/--disable-gettext option and feature detection in
configure. This preserves QEMU's default behavior of detecting system
features, without any warning, if neither --enable-* nor --disable-*
is requested.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the create-config logic to meson.build; create a
configuration_data object and let meson handle the
quoting and output.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now, sphinx is run on every invocation of make. The previous mechanism
using $(wildcard) is not reproducible in Meson and was also brittle; for
example some .rst.inc files were left out. The next patch will introduce
a Sphinx extension to emit a depfile.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The executable moves back from libexecdir to bindir, when it was
in 5.0 and earlier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Needed by linux-user/s390x/cpu_loop.c; this removes the only use of HOST_CC.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no probing in configure, so no need to pass them as
variables to meson. Do a regular meson dependency() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can use config-host.mak to decide whether the tool has to be built,
apart from that the conversion is straightforward.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The libiscsi pkg-config information is extracted from config-host.mak and
used to link vhost-user-blk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not use cgcc; instead, extract compilation commands from compile_commands.json
and invoke sparse directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Meson build system is integrated in the existing configure/make steps
by invoking Meson from the configure script and converting Meson's build.ninja
rules to an included Makefile.
build.ninja already provides tags/ctags/cscope rules, so they are removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
