Compile in both gtk-egl and gtk-gl-area, then allow to choose at runtime
instead of compile time which opengl variant we want use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-2-kraxel@redhat.com
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Also drop curses libs from libs_softmmu. Add CURSES_{CFLAGS,LIBS}
variables so we can use them for linking the curses module.
Also make target/unicore32/helper.o depend on curses which uses curses
directly for some reason ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-12-kraxel@redhat.com
Also drop gtk and vte libs from libs_softmmu, so the libs are not
pulled in unless the gtk module actually gets loaded.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-11-kraxel@redhat.com
Simplifies handling the X11 dependency,
also makes ui/Makefile.objs more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-9-kraxel@redhat.com
If a requested user interface is not available, try loading it as
module, simliar to block layer modules. Needed to keep things working
when followup patches start to build user interfaces as modules.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-8-kraxel@redhat.com
Using the new display registry instead of #ifdefs in vl.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-7-kraxel@redhat.com
Add a registry for user interfaces. Add qemu_display_init and
qemu_display_early_init helper functions for display initialization.
Hook up gtk ui as first user.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-2-kraxel@redhat.com
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Pass the modifier state to the keymap lookup function. In case multiple
keysym -> keycode mappings exist look at the modifier state and prefer
the mapping where the modifier state matches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-6-kraxel@redhat.com
Sometimes the same keysym can be created using different key
combinations. Record them all in the reverse keymap, not only
the first one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-5-kraxel@redhat.com
No need to figure them at runtime from the keymap.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-4-kraxel@redhat.com
Drop home-grown lookup code, which is a strange mix of a lookup table
and a list. Use standard glib hash instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-3-kraxel@redhat.com
Also use kbd_layout_t pointers instead of void pointers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180222070513.8740-2-kraxel@redhat.com
The cursor dmabuf can be NULL, in case no cursor defined by the guest.
Happens for example when linux guests show the framebuffer console.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180220110433.20353-3-kraxel@redhat.com
Split the cursor callback into two, one for setting the dmabuf,
one for setting the position. Also add hotspot information.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180220110433.20353-2-kraxel@redhat.com
After some hotkey was pressed sdl2 doesn't forward the first modifier
keyup event to the guest, resulting in stuck modifier keys.
Fix the logic in handle_keyup(). Also gui_key_modifier_pressed doesn't
need to be a global variable.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180220150444.784-1-kraxel@redhat.com
Fill the terminal box from right to left to avoid
Gtk-WARNING **: Allocating size to GtkScrollbar 0x55f6d54b0200 without
calling gtk_widget_get_preferred_width/height(). How does the code
know the size to allocate?
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 902aaef8-d20e-0530-dea2-cdfe3db33ff3@web.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QAPI DisplayType enum, DisplayOptions union and DisplayGTK struct.
Switch gtk configuration to use the qapi type.
Some bookkeeping (fullscreen for example) is done twice now, this is
temporary until more/all UIs are switched over to qapi configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In previous commit:
commit 6aa22a2918
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Dec 18 19:12:27 2017 +0000
ui: add trace events related to VNC client throttling
trace points related to unthrottling client I/O were missed from the
SASL codepaths.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20180205114938.15784-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'vs->as.freq' value is a signed integer, which is read from an
unsigned 32-bit int field on the wire. There is thus a risk of overflow
on 32-bit platforms. Move the frequency limit checking to be done at
time of read before casting to a signed integer.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The start_auth_sasl() method declares a 'Error *local_err' variable in
an inner if () {...} scope, which shadows a variable of the same name
declared at the start of the method. This is confusing for reviewers and
may trigger compiler warnings.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For very large framebuffers, it is theoretically possible for the result
of 'vs->throttle_output_offset * VNC_THROTTLE_OUTPUT_LIMIT_SCALE' to
exceed the size of a 32-bit int. For this to happen in practice, the
video RAM would have to be set to a large enough value, which is not
likely today. None the less we can be paranoid against future growth by
using division instead of multiplication when checking the limits.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180205114938.15784-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu mouse mode changes from relative to absolute
we must turn off sdl relative mouse mode too.
Fixes: https://bugs.launchpad.net/qemu/+bug/1703795
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180202120803.11501-1-kraxel@redhat.com>
The documentation on SDL_RenderPresent function states that
"the backbuffer should be considered invalidated after each present",
so copy the entire texture on each redraw.
On the other hand, SDL_UpdateTexture function is described as
"fairly slow function", so restrict it to just the changed pixels.
Also added SDL_RenderClear call, as suggested in the documentation
page on SDL_RenderPresent.
Signed-off-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Message-id: 20180205133228.25082-1-anatoly.trosinenko@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On one of our client's node, due to trying to read from closed ioc,
a segmentation fault occured. Corresponding backtrace:
0 object_get_class (obj=obj@entry=0x0)
1 qio_channel_readv_full (ioc=0x0, iov=0x7ffe55277180 ...
2 qio_channel_read (ioc=<optimized out> ...
3 vnc_client_read_buf (vs=vs@entry=0x55625f3c6000, ...
4 vnc_client_read_plain (vs=0x55625f3c6000)
5 vnc_client_read (vs=0x55625f3c6000)
6 vnc_client_io (ioc=<optimized out>, condition=G_IO_IN, ...
7 g_main_dispatch (context=0x556251568a50)
8 g_main_context_dispatch (context=context@entry=0x556251568a50)
9 glib_pollfds_poll ()
10 os_host_main_loop_wait (timeout=<optimized out>)
11 main_loop_wait (nonblocking=nonblocking@entry=0)
12 main_loop () at vl.c:1909
13 main (argc=<optimized out>, argv=<optimized out>, ...
Having analyzed the coredump, I understood that the reason is that
ioc_tag is reset on vnc_disconnect_start and ioc is cleaned
in vnc_disconnect_finish. Between these two events due to some
reasons the ioc_tag was set again and after vnc_disconnect_finish
the handler is running with freed ioc,
which led to the segmentation fault.
The patch checks vs->disconnecting in places where we call
qio_channel_add_watch and resets handler if disconnecting == TRUE
to prevent such an occurrence.
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180207094844.21402-1-klim.kireev@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_listen_io() does not own the reference on the 'cioc' parameter is it
passed, so should not be unref'ing it.
Fixes: 13e1d0e71e
Reported-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180215102602.10864-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers. Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time. Most of the
places that use it don't need all the headers, either.
Include the necessary headers directly, and drop qapi/qmp/types.h.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
