The noVNC server sends a header "Connection: keep-alive, Upgrade" which
fails our simple equality test. Split the header on ',', trim whitespace
and then check for 'upgrade' token.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently most outbound I/O on the websock channel gets copied into the
rawoutput buffer, and then immediately copied again into the encoutput
buffer, with a header prepended. Now that qio_channel_websock_encode
accepts a struct iovec, we can trivially remove this bounce buffering
and write directly to encoutput.
In doing so, we also now correctly validate the encoutput size against
the QIO_CHANNEL_WEBSOCK_MAX_BUFFER limit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring use of another Buffer, pass a struct iovec
into qio_channel_websock_encode, which gives callers more
flexibility in how they process data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qio_channel_websock_encode method is only used in one place,
everything else calls qio_channel_websock_encode_buffer directly.
It can also be pushed up a level into the qio_channel_websock_writev
method, since every other caller of qio_channel_websock_write_wire
has already filled encoutput.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We must ensure we don't get flooded with ping replies if the outbound
channel is slow. Currently we do this by keeping the ping reply in a
separate temporary buffer and only writing it if the encoutput buffer
is completely empty. This is overly pessimistic, as it is reasonable
to add a ping reply to the encoutput buffer even if it has previous
data in it, as long as that previous data doesn't include a ping
reply.
To track this better, put the ping reply directly into the encoutput
buffer, and then record the size of encoutput at this time in
pong_remain. As we write encoutput to the underlying channel, we
can decrement the pong_remain counter. Once it hits zero, we can
accept further ping replies for transmission.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The websocket GSource is monitoring the size of the rawoutput
buffer to determine if the channel can accepts more writes.
The rawoutput buffer, however, is merely a temporary staging
buffer before data is copied into the encoutput buffer. Thus
its size will always be zero when the GSource runs.
This flaw causes the encoutput buffer to grow without bound
if the other end of the underlying data channel doesn't
read data being sent. This can be seen with VNC if a client
is on a slow WAN link and the guest OS is sending many screen
updates. A malicious VNC client can act like it is on a slow
link by playing a video in the guest and then reading data
very slowly, causing QEMU host memory to expand arbitrarily.
This issue is assigned CVE-2017-15268, publically reported in
https://bugs.launchpad.net/qemu/+bug/1718964
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If an offset of ports is specified to the inet_listen_saddr function(),
and two or more processes tries to bind from these ports at the same time,
occasionally more than one process may be able to bind to the same
port. The condition is detected by listen() but too late to avoid a failure.
This function is called by socket_listen() and used
by all socket listening code in QEMU, so all cases where any form of dynamic
port selection is used should be subject to this issue.
Add code to close and re-establish the socket when this
condition is observed, hiding the race condition from the user.
Also clean up some issues with error handling to allow more
accurate reporting of the cause of an error.
This has been developed and tested by means of the
test-listen unit test in the previous commit.
Enable the test for make check now that it passes.
Reviewed-by: Bhavesh Davda <bhavesh.davda@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Another refactoring step to prepare for fixing the problem
exposed with the test-listen test in the previous commit
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A refactoring step to prepare for the problem
exposed by the test-listen test in the previous commit.
Simplify and reorganize the IPv6 specific extra
measures and move it out of the for loop to increase
code readability. No semantic changes.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- Marc-André Lureau - NBD: use g_new() family of functions
- Vladimir Sementsov-Ogievskiy - first half of 00/13 nbd minimal structured read
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJZ4q4XAAoJEKeha0olJ0NqEooH/R8NKYACELA39xrLdEMUQuZY
1Lm3/OtpBIICKx7OiZ7LniqApAI++FgjNxOf6PAfNG0TmEA+wMFaZ6NJEdi9DAmv
kJVLsxiqKLDD+WIKMq5XfZQoFMJ8rV8W2/BYx9cF3Pl4KMT20qDsumsncZJ7DGOR
jjsbAI8Q6g45VBx6TJbxXiTMDj87nIyNaydAGzRQTmEHtnmh8mllPiuEhJu24l6G
7CQKfcu4/7Te/5PvJIPn7CxHdVjLYalgWDRkU3kXcwmO8vGQEkYoiHPoc8lGsGtw
oXJ2YIODYBIjeICkF0/PjT9aoeJQG8EuHR1hT0CW5dVBZz/DlVP/j+EZ6IDV/8k=
=ud0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-10-14' into staging
nbd patches for 2017-10-14
- Marc-André Lureau - NBD: use g_new() family of functions
- Vladimir Sementsov-Ogievskiy - first half of 00/13 nbd minimal structured read
# gpg: Signature made Sun 15 Oct 2017 01:38:47 BST
# gpg: using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2017-10-14:
nbd: header constants indenting
nbd/server: simplify reply transmission
nbd/server: refactor nbd_co_send_simple_reply parameters
nbd/server: do not use NBDReply structure
nbd/server: structurize simple reply header sending
nbd: rename some simple-request related objects to be _simple_
block/nbd-client: refactor nbd_co_receive_reply
block/nbd-client: assert qiov len once in nbd_co_request
NBD: use g_new() family of functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were defining TARGET_FS_IOC_GETFLAGS and TARGET_FS_IOC_SETFLAGS
using the host 'long' type in the size field, which meant that
they had the wrong values if the host and guest had different
sized longs. Switch to abi_long instead.
This fixes a bug where these ioctls don't work on 32-bit guests
on 64-bit hosts (and makes the LTP test 'setxattr03' pass
where it did not previously.)
Reported-by: pgndev <pgnet.dev@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The real kernel has TASK_SIZE as 0x7c000000, due to quirks with
a couple of SH parts. But nominally user-space is limited to 2GB.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170708025030.15845-4-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure
that the allocation coming in from the command-line option was
not too large, but that didn't include target-specific knowledge
about other restrictions on user-space.
Remove several target-specific hacks in linux-user/main.c.
For MIPS and Nios, we can replace them with proper adjustments
to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition.
For ARM, we had no existing ifdef but I suspect that the current
default value of 0xf7000000 was chosen with this in mind. Define
a workable value in linux-user/arm/, and also document why the
special case is required.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20170708025030.15845-3-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Most of the users of page_set_flags offset (page, page + len) as
the end points. One might consider this an error, since the other
users do supply an endpoint as the last byte of the region.
However, the first thing that page_set_flags does is round end UP
to the start of the next page. Which means computing page + len - 1
is in the end pointless. Therefore, accept this usage and do not
assert when given the exact size of the vm as the endpoint.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170708025030.15845-2-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 32-bit ARM validate_guest_space() check tests whether the
specified -R value leaves enough space for us to put the
commpage in at 0xffff0f00. However it was incorrectly doing
a <= check for the check against (guest_base + guest_size),
which meant that it wasn't permitting the guest space to
butt right up against the commpage.
Fix the comparison, so that -R values all the way up to 0xffff0000
work correctly.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since O_TMPFILE might differ between guest and host,
add it to the bitmask_transtbl. While at it, fix the definitions
of O_DIRECTORY etc which should arm32 according to kernel sources.
This fixes open14 and openat03 ltp testcases. Fixes:
https://bugs.launchpad.net/qemu/+bug/1709170
The gd_gl_area_scanout_texture must destroy framebuffer if there is
no texture id instead of no framebuffer id.
The effect was a black screen with "-vga virtio -display gtk,gl=on"
options.
The bug was introduce by a4f113fd "gtk: use framebuffer helper functions."
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com>
Message-id: 20171002124052.13829-1-anthoine.bourgeois@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vte_terminal_copy_clipboard() is deprecated in VTE 0.50.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu-keymap generates qemu reverse keymaps from xkb keymaps,
which can be used with the qemu "-k" command line switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20171005153330.19210-2-kraxel@redhat.com
All public code should use qemu_input_event_send_key* functions
instead of creating an event directly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always use QKeyCode in the InputKeyEvent struct, by converting key
numbers to QKeyCode at the time the event is created. This allows
the code processing / consuming key events to assume QKeyCode is
used. The only place we accept a key number in the InputKeyEvent
struct is with QMP commands sent by the user.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the number_to_qcode, qcode_to_number and linux_to_qcode
tables with automatically generated tables.
Missing entries in linux_to_qcode now fixed:
KEY_LINEFEED -> Q_KEY_CODE_LF
KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS
KEY_COMPOSE -> Q_KEY_CODE_COMPOSE
KEY_AGAIN -> Q_KEY_CODE_AGAIN
KEY_PROPS -> Q_KEY_CODE_PROPS
KEY_UNDO -> Q_KEY_CODE_UNDO
KEY_FRONT -> Q_KEY_CODE_FRONT
KEY_COPY -> Q_KEY_CODE_COPY
KEY_OPEN -> Q_KEY_CODE_OPEN
KEY_PASTE -> Q_KEY_CODE_PASTE
KEY_CUT -> Q_KEY_CODE_CUT
KEY_HELP -> Q_KEY_CODE_HELP
KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT
In addition, some fixes:
- KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of
KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes
sets, while KEY_PLAYCD only appears in AT set1, so the former is
a more useful mapping.
Missing entries in qcode_to_number now fixed:
Q_KEY_CODE_AGAIN -> 0x85
Q_KEY_CODE_PROPS -> 0x86
Q_KEY_CODE_UNDO -> 0x87
Q_KEY_CODE_FRONT -> 0x8c
Q_KEY_CODE_COPY -> 0xf8
Q_KEY_CODE_OPEN -> 0x64
Q_KEY_CODE_PASTE -> 0x65
Q_KEY_CODE_CUT -> 0xbc
Q_KEY_CODE_LF -> 0x5b
Q_KEY_CODE_HELP -> 0xf5
Q_KEY_CODE_COMPOSE -> 0xdd
Q_KEY_CODE_KP_EQUALS -> 0x59
Q_KEY_CODE_MEDIASELECT -> 0xed
In addition, some fixes:
- Q_KEY_CODE_MENU was incorrectly mapped to the compose
scancode (0xdd) and is now mapped to 0x9e
- Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
of to 0xe041 (Find)
- Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
instead of of 0x77 (Hirigana)
- Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined
scan code in AT set 1, it is now mapped to 0x54 (sysrq)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.
It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com
[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building the tarball to pass into the docker/vm test image,
the code relies on the git submodules being checked out in the
main checkout.
ie if the developer has not run 'git submodule update --init dtc'
many of the docker tests will fail due to the libfdt package not
being present in the test images. Patchew manually checks out the
dtc submodule in the main git checkout, but this is a bad idea.
When running tests we want to have a predictable set of submodules
included in the source that's tested. The build environment is
completely independent of the developers host OS, so the submodules
the developer has checked out should not be considered relevant for
the tests.
This changes the archive-source.sh script so that it clones the
current git checkout into a temporary directory, checks out a
fixed set of submodules, builds the tarball and finally removes
the temporary git clone.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.
This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com
[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[fixup] Makefile dep
9p back-end first queries the size of an extended attribute,
allocates space for it via g_malloc() and then retrieves its
value into allocated buffer. Race between querying attribute
size and retrieving its could lead to memory bytes disclosure.
Use g_malloc0() to avoid it.
Reported-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ4KVjAAoJEHWtZYAqC0IRiAoIAK1JYsChRXR7T0jbQAuHglcQ
AfU6gLrejB4iq6u7jjR/z5Z3PO35YMF4/bwr4T9m1uRcqplggsyin93p5SmLKMtb
7d76i24am7oDveho1APe3vvoPd8ghmombsi7xVx1Yu80Ukcx39AA0ncCWSqtFjMk
DT8otWwg4ltTSuAtNVAQl0Drgm63ptAM4m/GekCBdWFK+Gl3fAJhkZchLUCdedJf
ePEwZc3TCSnWmNjJBAPmjIeZeyUG841xOLc5Y+V+7TRj28QO7G0PM3PV6d1rwqYX
otP1NmmMYKuCqdB1YUFUoQ3Z4yymDBcvAoNlYcjpKcz4ypbUlcd57aiWn0sATWc=
=2Z/c
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2017-10-04-3' into staging
Merge tpm 2017/10/04 v3
# gpg: Signature made Fri 13 Oct 2017 12:37:07 BST
# gpg: using RSA key 0x75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2017-10-04-3:
specs: Describe the TPM support in QEMU
tpm: Move tpm_cleanup() to right place
tpm: Added support for TPM emulator
tpm-passthrough: move reusable code to utils
tpm-backend: Move realloc_buffer() implementation to tpm-tis model
tpm-backend: Add new API to read backend TpmInfo
tpm-backend: Made few interface methods optional
tpm-backend: Initialize and free data members in it's own methods
tpm-backend: Move thread handling inside TPMBackend
tpm-backend: Remove unneeded member variable from backend class
tpm: Use EMSGSIZE instead of EBADMSG to compile on OpenBSD
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The device can not be instantiated on many non-x86 and just prints
some error messages, e.g.:
$ qemu-system-ppc64 -device vmxnet3 -M g3beige
[vmxnet3][WR][vmxnet3_init_msix]: Failed to initialize MSI-X, error -95
[vmxnet3][WR][vmxnet3_pci_realize]: Failed to initialize MSI-X, configuration is inconsistent.
Since vmxnet3 is a para-virtualized device that is only useful on x86,
it should also only be enabled on the x86 targets.
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU has been compiled with the flags --enable-tcg-interpreter and
--enable-debug, the guest is running incredibly slow. The prom-env
test is approximately 10 times slower than normal in this case, and
it takes up to 500 seconds until the test with the pseries machine
finishs. While we should still look for ways to speed up the test
on the pseries machine here, let's bump the timeout to 600 seconds to
allow the test to pass with this unusal configuration already now.
Also move the pseries test into the "slow" category - since it is
really a very slow test.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: split of some files in other commits of the same series, add libqtest.c]
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
[thuth: Remove "qemu:" prefix from strings]
Signed-off-by: Thomas Huth <thuth@redhat.com>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=NLvH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/vu-pull-request' into staging
# gpg: Signature made Thu 12 Oct 2017 21:52:28 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/vu-pull-request:
libvhost-user: Support VHOST_USER_SET_SLAVE_REQ_FD
libvhost-user: Update and fix feature and request lists
vhost-user-bridge: Only process received packets on started queues
libvhost-user: vu_queue_started
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pxe-test is a very good test to excercise NICs, thus we should use
it to test all NICs that can be used by the BIOS for booting via network.
However, to avoid that the default testing time increases too much, the
additional NICs are only tested in the "make check SPEED=slow" mode.
The virtio-net NIC on ppc64 is now also only tested in slow mode, since
the test on ppc64 is really quite slow and we've got test coverage for
virtio-net in big endian mode now on s390x, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since 4458fb3a79 (pc: Eliminate pc_default_machine_options()),
hot_add_cpu is set in pc_machine_class_init(), so we don't
need to set it in pc_q35_machine_options(), pc_i440fx_machine_options()
and xenfv_machine_options(), except to clear it in
pc_i440fx_1_4_machine_opt().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't touch isapc when we change guest ABI and add new entries
to PC_COMPAT_* or new PCMachineClass compat flags. This means
isapc never guaranteed guest ABI and cross-QEMU-version live
migration compatibility. There's no point in keeping code for
kvm-pv-eoi and APIC ID compatibility in pc_init_isa().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The modern bar is accessed now via yet another address space created just
for that purpose and it does not really need FlatView and dispatch tree
as it has a single memory region so it is just a waste of memory. Things
get even worse when there are dozens or hundreds of virtio-pci devices -
since these address spaces are global, changing any of them triggers
rebuilding all address spaces.
This replaces indirect accesses to the modern BAR with a simple lookup
and direct calls to memory_region_dispatch_read/write.
This is expected to save lots of memory at boot time after applying:
[Qemu-devel] [PULL 00/32] Misc changes for 2017-09-22
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While changing the s/g list allocation, commit 3b3b0628
also changed the descriptor counting to count iovec entries
as split by cpu_physical_memory_map(). Previously only the
actual descriptor entries were counted and the split into
the iovec happened afterwards in virtqueue_map().
Count the entries again instead to avoid erroneous
"Looped descriptor" errors.
Reported-by: Hans Middelhoek <h.middelhoek@ospito.nl>
Link: https://forum.proxmox.com/threads/vm-crash-with-memory-hotplug.35904/
Fixes: 3b3b062821 ("virtio: slim down allocation of VirtQueueElements")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IO_LIMIT and IO_BASE registers should not be writable if
gen_pcie_root_port's io-reserve property is set to 0.
The COMMAND register should have the IO flag read only.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure we don't forget to add the Conventional PCI or PCI
Express interface names on PCI device classes in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Revieed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
xen-pt doesn't set the is_express field, but is supposed to be
able to handle PCI Express devices too. Mark it as hybrid.
Suggested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Change all devices that set is_express=1 to implement
INTERFACE_PCIE_DEVICE.
Cc: Keith Busch <keith.busch@intel.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: qemu-block@nongnu.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following devices support both PCI Express and Conventional
PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS
flag and/or conditional pcie_endpoint_cap_init() calls:
* vfio-pci (is_express=1, but legacy PCI handled by
vfio_populate_device())
* vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize())
* pvscsi (is_express=0, but PCIe handled by pvscsi_realize())
* virtio-pci (is_express=0, but PCIe handled by
virtio_pci_dc_realize(), and additional legacy PCI code at
virtio_pci_realize())
* base-xhci (is_express=1, but pcie_endpoint_cap_init() call
is conditional on pci_bus_is_express(dev->bus)
* Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the
other hybrid devices
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Those two interfaces will be used to indicate which device types
support Conventional PCI or PCI Express buses. Management
software will be able to use the qom-list-types QMP command to
query that information.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
