We don't need to allocate plugin context at startup,
we can wait until we actually use it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need to separately record the start of the TB.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can delay the computation of haddr until the plugin
actually requests it.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not pass around a boolean between multiple structures,
just read it from the TranslationBlock in the TCGContext.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the bytes that we record for the entire TB, rather than
a per-insn GByteArray. Record the length of the insn in
plugin_gen_insn_end rather than infering from the length
of the array.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy data out of a completed translation. This will be used
for both plugins and disassembly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of returning a host pointer, copy the data into
storage provided by the caller.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be able to replace plugin_insn_append, and will
be usable for disassembly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow translation to proceed beyond one insn with mmio,
as we will not be caching the TranslationBlock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg translator_access into translator_ld, with a more
memcpy-ish interface. If both pages are in ram, do not
go through the caller's slow path.
Assert that the access is within the two pages that we are
prepared to protect, per TranslationBlock. Allow access
prior to pc_first, so long as it is within the first page.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While there are other methods that could be used to replace
TARGET_PAGE_MASK, the function is not really required outside
the context of target-specific translation.
This makes the header usable by target independent code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Bump minimum glib version and use URI code from the newer glib
* Fix error message from "configure" when C compiler is not working
-----BEGIN PGP SIGNATURE-----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=VRHz
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-05-14' of https://gitlab.com/thuth/qemu into staging
* Fix the "tsan-build" CI job on the shared gitlab CI runners
* Bump minimum glib version and use URI code from the newer glib
* Fix error message from "configure" when C compiler is not working
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmZDXcYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVPJw//bK/NuMKOHlnwgowkQ/x41t8nc0jAR38+
# aMhJBTSB+9EOlPd+/y7+IeFlD9lS2JzoX/CWeBrNlKc6juWQahABJYcvscmdGiYr
# a/dUy9iZoqJyY220TMjCWYwORRtNqPDXaiUIR8hBZZBmW51xs1hRc3aazxPm6dOD
# cj1yFKwWGY5g72SkRNTMWi3qWX1tXNOh7sbuhWKkZ3eiRCllHb0RwrhA341ze4TI
# ckmlSA6stMjls4XNAIAKVdRKLPE1BsJ/UKxpnOEO3F640cbe69B0+z13wIBNfTOY
# Mk3zSjrdLY6thSY+2iOb2FLt3wC5QCBjyRluv+0kwdSnz6xsafEDWNx5VneZH+Iu
# ZQWLGvN4qUUBBqHKY8eWnrsij3ABXioHLK8eHj2JuHidcG15tku/1cwAJvy/8P/O
# iup0elZ3MXaAk6ce3dwYY4t6QecuzqX9cdJkTuRNlzysK1xKQdBiYTdeZikfUAoM
# InuFUh732yPXDSiZcG+uMXUTAJXHWASr7bvPydDx/gL1tYGYBqYepfPF2uWYfNwg
# VZRgsN6WVDBGPyXv8Z7eQ9lye5JoAGYrSDxZE87q8RwRV5holiYDxtf10zeLz3Wf
# RI5L/bb2eFSHzi3quzOC1uLflLqNKwq+9UZEjdLv2z8zuhwVwxbcDV9+ox6zA8zi
# dnVC3Yp/3ik=
# =VRHz
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 May 2024 02:49:10 PM CEST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2024-05-14' of https://gitlab.com/thuth/qemu:
util/uri: Remove the old URI parsing code
block/ssh: Use URI parsing code from glib
block/nfs: Use URI parsing code from glib
block/nbd: Use URI parsing code from glib
block/gluster: Use URI parsing code from glib
Remove glib compatibility code that is not required anymore
Bump minimum glib version to v2.66
gitlab: use 'setarch -R' to workaround tsan bug
gitlab: use $MAKE instead of 'make'
dockerfiles: add 'MAKE' env variable to remaining containers
configure: Fix error message when C compiler is not working
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By default, SDL disables the screen saver which prevents the host from powering
down the screen even if the screen is locked. This results in draining the
battery needlessly when the host isn't connected to a wall charger. Fix that by
enabling the screen saver.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240512095945.1879-1-shentey@gmail.com>
Remove gtk_widget_get_scale_factor() usage from the calculation of
the motion events in the GTK backend to make it work correctly on
environments that have `gtk_widget_get_scale_factor() != 1`.
This scale factor usage had been introduced in the commit f14aab420c and
at that time the window size was used for calculating the things and it
was working correctly. However, in the commit 2f31663ed4 the logic
switched to use the widget size instead of window size and because of
the change the usage of scale factor becomes invalid (since widgets use
`vc->gfx.scale_{x, y}` for scaling).
Tested on Crostini on ChromeOS (15823.51.0) with an external display.
Fixes: 2f31663ed4 ("ui/gtk: use widget size for cursor motion event")
Fixes: f14aab420c ("ui: fix incorrect pointer position on highdpi with
gtk")
Signed-off-by: hikalium <hikalium@hikalium.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240512111435.30121-3-hikalium@hikalium.com>
Add gd_motion_event trace event for making it easy to debug
gd_motion_event related issues.
Signed-off-by: hikalium <hikalium@hikalium.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240512111435.30121-2-hikalium@hikalium.com>
To complete privatizing process of QemuDmaBuf, QemuDmaBuf struct def
is moved to dmabuf.c
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-7-dongwon.kim@intel.com>
This commit introduces utility functions for the creation and deallocation
of QemuDmaBuf instances. Additionally, it updates all relevant sections
of the codebase to utilize these new utility functions.
v7: remove prefix, "dpy_gl_" from all helpers
qemu_dmabuf_free() returns without doing anything if input is null
(Daniel P. Berrangé <berrange@redhat.com>)
call G_DEFINE_AUTOPTR_CLEANUP_FUNC for qemu_dmabuf_free()
(Daniel P. Berrangé <berrange@redhat.com>)
v8: Introduction of helpers was removed as those were already added
by the previous commit
v9: set dmabuf->allow_fences to 'true' when dmabuf is created in
virtio_gpu_create_dmabuf()/virtio-gpu-udmabuf.c
removed unnecessary spaces were accidently added in the patch,
'ui/console: Use qemu_dmabuf_new() a...'
v11: Calling qemu_dmabuf_close was removed as closing dmabuf->fd will be
done in qemu_dmabuf_free anyway.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: --- Calling qemu_dmabuf_close separately as qemu_dmabuf_free doesn't
do it.
--- 'dmabuf' is now allocated space so it should be freed at the end of
dbus_scanout_texture
v13: --- Immediately free dmabuf after it is released to prevent possible
leaking of the ptr
(Marc-André Lureau <marcandre.lureau@redhat.com>)
--- Use g_autoptr macro to define *dmabuf for auto clean up instead of
calling qemu_dmabuf_free
(Marc-André Lureau <marcandre.lureau@redhat.com>)
v14: --- (vhost-user-gpu) Change qemu_dmabuf_free back to g_clear_pointer
as it was done because of some misunderstanding (v13).
--- (vhost-user-gpu) g->dmabuf[m->scanout_id] needs to be set to NULL
to prevent freed dmabuf to be accessed again in case if(fd==-1)break;
happens (before new dmabuf is allocated). Otherwise, it would cause
invalid memory access when the same function is executed. Also NULL
check should be done before qemu_dmabuf_close (it asserts dmabuf!=NULL.).
(Marc-André Lureau <marcandre.lureau@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-6-dongwon.kim@intel.com>
This commit updates all occurrences where these fields were
set directly have been updated to utilize helper functions.
v7: removed prefix, "dpy_gl_" from all helpers
v8: Introduction of helpers was removed as those were already added
by the previous commit
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-5-dongwon.kim@intel.com>
This commit updates all instances where fields within the QemuDmaBuf
struct are directly accessed, replacing them with calls to these new
helper functions.
v6: fix typos in helper names in ui/spice-display.c
v7: removed prefix, "dpy_gl_" from all helpers
v8: Introduction of helpers was removed as those were already added
by the previous commit
v11: -- Use new qemu_dmabuf_close() instead of close(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
-- Use new qemu_dmabuf_dup_fd() instead of dup(qemu_dmabuf_get_fd()).
(Daniel P. Berrangé <berrange@redhat.com>)
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-4-dongwon.kim@intel.com>
New header and source files are added for containing QemuDmaBuf struct
definition and newly introduced helpers for creating/freeing the struct
and accessing its data.
v10: Change the license type for both dmabuf.h and dmabuf.c from MIT to
GPL to be in line with QEMU's default license
v11: -- Added new helpers, qemu_dmabuf_close for closing dmabuf->fd,
qemu_dmabuf_dup_fd for duplicating dmabuf->fd
(Daniel P. Berrangé <berrange@redhat.com>)
-- Let qemu_dmabuf_fee to call qemu_dmabuf_close before freeing
the struct to make sure fd is closed.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: Not closing fd in qemu_dmabuf_free because there are cases fd
should still be available even after the struct is destroyed
(e.g. virtio-gpu: res->dmabuf_fd).
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-3-dongwon.kim@intel.com>
'fence_fd' needs to be validated always before being referenced
And the passing condition should include '== 0' as 0 is a valid
value for the file descriptor.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-2-dongwon.kim@intel.com>
Draw routine needs to be manually invoked in the next refresh
if there is a scanout blob from the guest. This is to prevent
a situation where there is a scheduled draw event but it won't
happen bacause the window is currently in inactive state
(minimized or tabified). If draw is not done for a long time,
gl_block timeout and/or fence timeout (on the guest) will happen
eventually.
v2: Use gd_gl_area_draw(vc) in gtk-gl-area.c
Suggested-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240426225059.3871283-1-dongwon.kim@intel.com>
Now that we switched all consumers of the URI code to use the URI
parsing functions from glib instead, we can remove our internal
URI parsing code since it is not used anymore.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240418101056.302103-14-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter.
While we're at it, also emit a warning when encountering unknown
parameters in the URI, so that the users have a chance to detect
their typos or other mistakes.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-ID: <20240418101056.302103-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter.
While we're at it, slightly rephrase one of the error messages:
Use "Invalid value..." instead of "Illegal value..." since the
latter rather sounds like the users were breaking a law here.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240418101056.302103-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter. The g_uri_get_host() also takes care
of removing the square brackets from IPv6 addresses, so we can
drop that part of the QEMU code now, too.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240418101056.302103-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since version 2.66, glib has useful URI parsing functions, too.
Use those instead of the QEMU-internal ones to be finally able
to get rid of the latter.
Since g_uri_get_path() returns a const pointer, we also need to
tweak the parameter of parse_volume_options() (where we use the
result of g_uri_get_path() as input).
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240418101056.302103-10-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we bumped the minimum glib version to 2.66, we can drop
the old code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we dropped support for CentOS 8 and Ubuntu 20.04, we can
look into bumping the glib version to a new minimum for further
clean-ups. According to repology.org, available versions are:
CentOS Stream 9: 2.66.7
Debian 11: 2.66.8
Fedora 38: 2.74.1
Freebsd: 2.78.4
Homebrew: 2.80.0
Openbsd: 2.78.4
OpenSuse leap 15.5: 2.70.5
pkgsrc_current: 2.78.4
Ubuntu 22.04: 2.72.1
Thus it should be safe to bump the minimum glib version to 2.66 now.
Version 2.66 comes with new functions for URI parsing which will
allow further clean-ups in the following patches.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240418101056.302103-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TSAN job started failing when gitlab rolled out their latest
release. The root cause is a change in the Google COS version used
on shared runners. This brings a kernel running with
vm.mmap_rnd_bits = 31
which is incompatible with TSAN in LLVM < 18, which only supports
upto '28'. LLVM 18 can support upto '30', and failing that will
re-exec itself to turn off VA randomization.
Our LLVM is too old for now, but we can run with 'setarch -R make ..'
to turn off VA randomization ourselves.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240513111551.488088-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The lcitool generated containers have '$MAKE' set to the path
of the right 'make' binary. Using the env variable makes it
possible to override the choice per job.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240513111551.488088-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All the lcitool generated containers define a "MAKE" env. It will be
convenient for later patches if all containers do this.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240513111551.488088-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If you try to run the configure script on a system without a working
C compiler, you get a very misleading error message:
ERROR: Unrecognized host OS (uname -s reports 'Linux')
Some people already opened bug tickets because of this problem:
https://gitlab.com/qemu-project/qemu/-/issues/2057https://gitlab.com/qemu-project/qemu/-/issues/2288
We should rather tell the user that we were not able to use the C
compiler instead, otherwise they will have a hard time to figure
out what was going wrong.
While we're at it, let's also suppress the "unrecognized host CPU"
message in this case since it is rather misleading than helpful.
Fixes: 264b803721 ("configure: remove compiler sanity check")
Message-ID: <20240513114010.51608-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* fix --without-default-devices build
* fix --without-default-devices qtests on s390x and arm
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY+JWIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGmwf+JKY/i7ihXvfINQIRSKaz+H7KM3Br
BGv/iXj4hrRA+zflcZswwoWmPrkrXM3J5JqGG6zTqqhGne+fRKt60KBFwn+lRaMY
n48icR4zOSaEcGKBOFKs9CB1JgL7SWMe+fZ8d02amYlIZ005af0d69ACenF9r/oX
pTxYIrR90FdZStbF4Yl0G5CzMLBdHZd/b6bMNmbefVPv3/d2zuL7VgqLX3y3J0ee
ASYkYjn8Wpda4KX9s2rvH9ENXj80Q7EqhuDvoBlyK72/2lE5aTojbUiyGB4n5AuX
5OHA+0HEpuCXXToijOeDXD1NDOk9E5DP8cEwwZfZ2gjWKjja0U6OODGLVw==
=woTe
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386: miscellaneous changes, mostly TCG-related
* fix --without-default-devices build
* fix --without-default-devices qtests on s390x and arm
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY+JWIUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGmwf+JKY/i7ihXvfINQIRSKaz+H7KM3Br
# BGv/iXj4hrRA+zflcZswwoWmPrkrXM3J5JqGG6zTqqhGne+fRKt60KBFwn+lRaMY
# n48icR4zOSaEcGKBOFKs9CB1JgL7SWMe+fZ8d02amYlIZ005af0d69ACenF9r/oX
# pTxYIrR90FdZStbF4Yl0G5CzMLBdHZd/b6bMNmbefVPv3/d2zuL7VgqLX3y3J0ee
# ASYkYjn8Wpda4KX9s2rvH9ENXj80Q7EqhuDvoBlyK72/2lE5aTojbUiyGB4n5AuX
# 5OHA+0HEpuCXXToijOeDXD1NDOk9E5DP8cEwwZfZ2gjWKjja0U6OODGLVw==
# =woTe
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 May 2024 03:47:14 PM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (27 commits)
configs: disable emulators that require it if libfdt is not found
hw/xtensa: require libfdt
kconfig: express dependency of individual boards on libfdt
kconfig: allow compiling out QEMU device tree code per target
meson: move libfdt together with other dependencies
meson: pick libfdt from common_ss when building target-specific files
tests/qtest: arm: fix operation in a build without any boards or devices
i386: select correct components for no-board build
hw/i386: move rtc-reset-reinjection command out of hw/rtc
hw/i386: split x86.c in multiple parts
i386: pc: remove unnecessary MachineClass overrides
i386: correctly select code in hw/i386 that depends on other components
xen: register legacy backends via xen_backend_init
xen: initialize legacy backends from xen_bus_init()
tests/qtest: s390x: fix operation in a build without any boards or devices
s390x: select correct components for no-board build
s390: move css_migration_enabled from machine to css.c
s390_flic: add migration-enabled property
s390x: move s390_cpu_addr2state to target/s390x/sigp.c
sh4: select correct components for no-board build
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since boards can express their dependency on libfdt and
system/device_tree.c, only leave TARGET_NEED_FDT if the target has a
hard dependency.
Those emulators will be skipped if libfdt is disabled, or if it
is "auto" and not found and --disable-download is passed; unless
the target is mentioned explicitly in --target-list, in which case
the build will fail.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All other boards require libfdt if it can be used (including for example
i386/x86_64), so change the "imply" to "select" and always allow -dtb
in qemu-system-xtensa.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that boards are enabled by default and the "CONFIG_FOO=y"
entries are gone from configs/devices/, there cannot be any more
a conflicts between the default contents of configs/devices/
and a failed "depends on" clause.
With this change, each individual board or target can express
whether it needs FDT. It can then include the common code in the
build via "select DEVICE_TREE", which will also as tell meson to link
with libfdt.
This allows building non-microvm x86 emulators without having
libfdt available.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new Kconfig symbol, CONFIG_DEVICE_TREE, that specifies whether
to include the common device tree code in system/device_tree.c and to
link to libfdt. For now, include it unconditionally if libfdt is
available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the libfdt detection code together with other dependencies instead
of keeping it with subprojects. This has the disadvantage of performing
the detection even if no target requires libfdt; but it has the advantage
that Kconfig will be able to observe the availability of the library.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid having to list dependencies such as libfdt twice, both on common_ss
and specific_ss. Instead, just take all the dependencies in common_ss
and allow the target-specific libqemu-*.fa library to use them.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM/aarch64 are easy to fix because they already have to pass a machine
type by hand. Just guard the tests with a check that the machine actually
exists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The local APIC is a part of the CPU and has callbacks that are invoked
from multiple accelerators.
The IOAPIC on the other hand is optional, but ioapic_eoi_broadcast is
used by common x86 code to implement the IOAPIC's implicit EOI mode.
Add a stub in case the IOAPIC device is not included but the APIC is.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The rtc-reset-reinjection QMP command is specific to x86, other boards do not
have the ACK tracking functionality that is needed for RTC interrupt
reinjection. Therefore the QMP command is only included in x86, but
qmp_rtc_reset_reinjection() is implemented by hw/rtc/mc146818rtc.c
and requires tracking of all created RTC devices. Move the implementation
to hw/i386, so that 1) it is available even if no RTC device exist
2) the only RTC that exists is easily found in x86ms->rtc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep the basic X86MachineState definition in x86.c. Move out functions that
are only needed by other files: x86-common.c for the pc and microvm machines,
x86-cpu.c for those used by accelerator code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240509170044.190795-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
