Commit Graph

793 Commits

Author SHA1 Message Date
Vladimir Sementsov-Ogievskiy
00e30f05de block/backup: use backup-top instead of write notifiers
Drop write notifiers and use filter node instead.

= Changes =

1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.

2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.

3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.

4. Block-copy is now using BdrvChildren instead of BlockBackends

5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.

= Iotest changes =

56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.

Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.

141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.

257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-10 10:56:18 +02:00
Max Reitz
cdf3bc934a mirror: Fix bdrv_has_zero_init() use
bdrv_has_zero_init() only has meaning for newly created images or image
areas.  If the mirror job itself did not create the image, it cannot
rely on bdrv_has_zero_init()'s result to carry any meaning.

This is the case for drive-mirror with mode=existing and always for
blockdev-mirror.

Note that we only have to zero-initialize the target with sync=full,
because other modes actually do not promise that the target will contain
the same data as the source after the job -- sync=top only promises to
copy anything allocated in the top layer, and sync=none will only copy
new I/O.  (Which is how mirror has always handled it.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-3-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19 17:13:26 +02:00
Vladimir Sementsov-Ogievskiy
319bd5edb9 block/backup: deal with zero detection
We have detect_zeroes option, so at least for blockdev-backup user
should define it if zero-detection is needed. For drive-backup leave
detection enabled by default but do it through existing option instead
of open-coding.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 18:29:43 -04:00
John Snow
1a2b8b406b block/backup: support bitmap sync modes for non-bitmap backups
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.

Some combinations don't make sense, though:

- NEVER policy combined with any non-BITMAP mode doesn't do anything,
  because the bitmap isn't used for input or output.
  It's harmless, but is almost certainly never what the user wanted.

- sync=NONE is more questionable. It can't use on-success because this
  job never completes with success anyway, and the resulting artifact
  of 'always' is suspect: because we start with a full bitmap and only
  copy out segments that get written to, the final output bitmap will
  always be ... a fully set bitmap.

  Maybe there's contexts in which bitmaps make sense for sync=none,
  but not without more severe changes to the current job, and omitting
  it here doesn't prevent us from adding it later.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 18:29:43 -04:00
John Snow
a6c9365ad4 block/backup: hoist bitmap check into QMP interface
This is nicer to do in the unified QMP interface that we have now,
because it lets us use the right terminology back at the user.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:03 -04:00
John Snow
c4e4b0fa59 qapi: implement block-dirty-bitmap-remove transaction action
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:03 -04:00
Vladimir Sementsov-Ogievskiy
2899f41eef blockdev: reduce aio_context locked sections in bitmap add/remove
Commit 0a6c86d024 returned these locks back to add/remove
functionality, to protect from intersection of persistent bitmap
related IO with other IO. But other bitmap-related functions called
here are unrelated to the problem, and there are no needs to keep these
calls inside critical sections.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:02 -04:00
John Snow
b30ffbef53 block/backup: loosen restriction on readonly bitmaps
With the "never" sync policy, we actually can utilize readonly bitmaps
now. Loosen the check at the QMP level, and tighten it based on
provided arguments down at the job creation level instead.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:02 -04:00
John Snow
c8b5650178 block/backup: Add mirror sync mode 'bitmap'
We don't need or want a new sync mode for simple differences in
semantics.  Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.

Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.

Add all of the plumbing necessary to support this new instruction.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:02 -04:00
John Snow
9203056614 blockdev-backup: utilize do_backup_common
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:01 -04:00
John Snow
7b0b870bcc drive-backup: create do_backup_common
Create a common core that comprises the actual meat of what the backup API
boundary needs to do, and then switch drive-backup to use it.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-08-16 16:28:01 -04:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster
db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Vladimir Sementsov-Ogievskiy
85c9d133fb blockdev: enable non-root nodes for transaction drive-backup source
We forget to enable it for transaction .prepare, while it is already
enabled in do_drive_backup since commit a2d665c1bc
    "blockdev: loosen restrictions on drive-backup source node"

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190618140804.59214-1-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24 15:53:01 +02:00
Vladimir Sementsov-Ogievskiy
b23c580c94 block: drop bs->job
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
   BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
   3.1 Some jobs creates filters to be their main node, so, this check
   don't actually prevent creating second job on same real node (which
   will create another filter node) (but I hope it is restricted by
   other mechanisms)
   3.2 Even without bs->job we have two systems of permissions:
   op-blockers and BLK_PERM
   3.3 We may want to run several jobs on one node one day

And finally, drop bs->job pointer itself. Hurrah!

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy
8164102ffe blockdev: blockdev_mark_auto_del: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Max Reitz
a2bb6f8c92 blockdev: Overlays are not snapshots
There are error messages which refer to an overlay node as the snapshot.
That is wrong, those are two different things.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190603202236.1342-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
John Snow
d81e1efbea blockdev-backup: don't check aio_context too early
in blockdev_backup_prepare, we check to make sure that the target is
associated with a compatible aio context. However, do_blockdev_backup is
called later and has some logic to move the target to a compatible
aio_context. The transaction version will fail certain commands
needlessly early as a result.

Allow blockdev_backup_prepare to simply call do_blockdev_backup, which
will ultimately decide if the contexts are compatible or not.

Note: the transaction version has always disallowed this operation since
its initial commit bd8baecd (2014), whereas the version of
qmp_blockdev_backup at the time, from commit c29c1dd312, tried to
enforce the aio_context switch instead. It's not clear, and I can't see
from the mailing list archives at the time, why the two functions take a
different approach. It wasn't until later in efd7556708 (2016) that the
standalone version tried to determine if it could set the context or
not.

Reported-by: aihua liang <aliang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1683498
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190523170643.20794-2-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Kevin Wolf
8ed7d42fb5 blockdev: Use bdrv_try_set_aio_context() for monitor commands
Monitor commands can handle errors, so they can easily be converted to
using the safer bdrv_try_set_aio_context() function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Kevin Wolf
d861ab3acf block: Add BlockBackend.ctx
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).

The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
John Snow
4da26f138d blockdev: fix missed target unref for drive-backup
If the bitmap can't be used for whatever reason, we skip putting down
the reference. Fix that.

In practice, this means that if you attempt to gracefully exit QEMU
after a backup command being rejected, bdrv_close_all will fail and
tell you some unpleasant things via assert().

Reported-by: aihua liang <aliang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1703916
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:20:41 +02:00
Peter Maydell
62f6849e7a Pull request
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAlztyykACgkQfe+BBqr8
 OQ4EaA//QQVDpIBRcMN+LeKWeEs8VSLziPUrZuFvuhMEEnjnaU6gbKq8G8xbFQ62
 JIHg0DBGhTt8ymE9Ay6O/cooR8F0z+XyfDr7UlpI7JL/Uwl7JguGKQrWUYBRMqCv
 Q2cLaWStLkfdkuW7Y3WRc16VEnIlizDxjRzfjE2ESYpuzD2fFsBY3KZbgbJwYwZw
 SujWUQ3MdsNdw5kDmerlrDUy7r/eyl2cLXyIt6ClHNoqq392oGMoUn4XbsaLnCWE
 H5s46qm33eXtvBHqxVGoOMAli5FwCnhwF+H3xg93jIG6vC/RXQYCIhlEmEwKyrU2
 g2DWWe/8+9b0iX+zTIcAPTcn1pmjVivGRorOurP0AtMtjV/8PvV+hAQQeSg2ARB3
 rLpXaEphD4WTwu7mYlZ5kX0qvX2SftaMU08k1IgR3mfo8Z3X9znVoFIv8HLlHuy+
 OhCmwT5OWYw4mNABTXeBMH/Dcs9EcU4+T/KhAGLReHo18CSyjeT2xsT+XCsETagF
 KlAP88dP0EdJ9Oiccyb8as22u7ygKWIiDYPplBdb4SkKg/koQnYGDjeDAzB2vXS3
 cGVhGJD2DBbcePA8iaCfWzsSCDOTBFQLa45uhPD3DnkAJylhecSsiDQP+IrLslK3
 h/8v9e8MAlHMgrueSnS7foMDI9rdrTNsChuNCJWOOaUI/ZWnXFg=
 =kCrN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Wed 29 May 2019 00:58:33 BST
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request:
  iotests: test external snapshot with bitmap copying
  qapi: support external bitmaps in block-dirty-bitmap-merge
  migration/dirty-bitmaps: change bitmap enumeration method

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-30 12:10:27 +01:00
Vladimir Sementsov-Ogievskiy
eff0829b07 qapi: support external bitmaps in block-dirty-bitmap-merge
Add new optional parameter making possible to merge bitmaps from
different nodes. It is needed to maintain external snapshots during
incremental backup chain history.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190517152111.206494-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-05-28 19:33:31 -04:00
John Snow
a2d665c1bc blockdev: loosen restrictions on drive-backup source node
We mandate that the source node must be a root node; but there's no reason
I am aware of that it needs to be restricted to such. In some cases, we need
to make sure that there's a medium present, but in the general case we can
allow the backup job itself to do the graph checking.

This patch helps improve the error message when you try to backup from
the same node more than once, which is reflected in the change to test
056.

For backups with bitmaps, it will also show a better error message that
the bitmap is in use instead of giving you something cryptic like "need
a root node."

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1707303
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190521210053.8864-1-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-05-28 20:30:55 +02:00
Markus Armbruster
cdcd436120 blockdev: Make -drive format=help print to stdout
Command line help explicitly requested by the user should be printed
to stdout, not stderr.  We do elsewhere.  Adjust -drive to match: use
qemu_printf() instead of error_printf().  Plain printf() would be
wrong because we need to print to the current monitor for "drive_add
... format=help".

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-13-armbru@redhat.com>
2019-04-18 22:18:59 +02:00
Max Reitz
74ce9e466a blockdev: Check @replaces in blockdev_mirror_common
There is no reason why the constraints we put on @replaces should be
limited to drive-mirror.  Therefore, move the sanity checks from
qmp_drive_mirror() to blockdev_mirror_common() so they apply to
blockdev-mirror as well.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-19 15:50:20 +01:00
Peter Maydell
523a2a42c3 Pull request
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+ber27ys35W+dsvQfe+BBqr8OQ4FAlyIFSwACgkQfe+BBqr8
 OQ7wghAAm16eCEr57oTO7QXR3y8uVFsKqXBn9cNH6nbrFp2PUQSglwMDKBls1Z5m
 olF23X/JaqSlSmkL9BBuzDZ6Up+kkHKuxPq4/5RKXfiDI0pr3R0eqts0COAlaN9q
 Bew3ipj99m8gzMi2093AW4+Ob0N3658fuDTGLe1M1Uoy7CEg1QJ7rVOBBEui7vIl
 RbZ8l/Zmb4ldNpB3lnE4Nh9ue8fy0RAj3Nai161nCnNeXNF/VzD3Ye8bojSBbnux
 PIMX6/RWmykX4feIf9QP8apDpxX4HkyuPq5EdwT9PD8PwdyXPAXZtsYUNCuNtQuk
 n5VKFVgFYgqUclBeVHmrMYPU4K4iCFQp4/Fua7wzPEC0iG05NiiDv91oVkEJCp3L
 ManHeuGfNLCcXaIntKZhuJl1cK8yMM3yDww6/pPTehrPjcyvKa0NOqhQBExektcD
 R6q7maJRzFaxSxdcs+Zzuog9zESvH1mlJxQCKzeYhAP0kkxInyTELE/Vbx37xuqR
 RFfZYyVQ6x87Q/sxHx4EMiV97WUM8elZOQdSEC/okt5WUUNpgIu0WF9nSQ1VKZ8C
 CZmv5xh9ogfwvB/kOm6IVwNkLvVagJQcLwddORI5LLXLbSIUcuwVSuyMp/7iDtQ/
 hnHkGs2mIJ2JUYbSSNsSJNs6oTurn8eTFCeGoYKJgd9l4QxaThU=
 =ekU+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Tue 12 Mar 2019 20:23:08 GMT
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request: (22 commits)
  tests/qemu-iotests: add bitmap resize test 246
  block/qcow2-bitmap: Allow resizes with persistent bitmaps
  block/qcow2-bitmap: Don't check size for IN_USE bitmap
  docs/interop/qcow2: Improve bitmap flag in_use specification
  bitmaps: Fix typo in function name
  block/dirty-bitmaps: implement inconsistent bit
  block/dirty-bitmaps: disallow busy bitmaps as merge source
  block/dirty-bitmaps: prohibit removing readonly bitmaps
  block/dirty-bitmaps: prohibit readonly bitmaps for backups
  block/dirty-bitmaps: add block_dirty_bitmap_check function
  block/dirty-bitmap: add inconsistent status
  block/dirty-bitmaps: add inconsistent bit
  iotests: add busy/recording bit test to 124
  blockdev: remove unused paio parameter documentation
  block/dirty-bitmaps: move comment block
  block/dirty-bitmaps: unify qmp_locked and user_locked calls
  block/dirty-bitmap: explicitly lock bitmaps with successors
  nbd: change error checking order for bitmaps
  block/dirty-bitmap: change semantics of enabled predicate
  block/dirty-bitmap: remove set/reset assertions against enabled bit
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	tests/qemu-iotests/group
2019-03-13 17:30:34 +00:00
Alberto Garcia
1479c730c7 block: Add an 'x-blockdev-reopen' QMP command
This command allows reopening an arbitrary BlockDriverState with a
new set of options. Some options (e.g node-name) cannot be changed
and some block drivers don't allow reopening, but otherwise this
command is modelled after 'blockdev-add' and the state of the reopened
BlockDriverState should generally be the same as if it had just been
added by 'blockdev-add' with the same set of options.

One notable exception is the 'backing' option: 'x-blockdev-reopen'
requires that it is always present unless the BlockDriverState in
question doesn't have a current or default backing file.

This command allows reconfiguring the graph by using the appropriate
options to change the children of a node. At the moment it's possible
to change a backing file by setting the 'backing' option to the name
of the new node, but it should also be possible to add a similar
functionality to other block drivers (e.g. Quorum, blkverify).

Although the API is unlikely to change, this command is marked
experimental for the time being so there's room to see if the
semantics need changes.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12 20:30:14 +01:00
Vladimir Sementsov-Ogievskiy
cb8aac3783 qapi: drop x- from x-block-latency-histogram-set
Drop x- and x_ prefixes for latency histograms and update version to
4.0

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12 20:30:08 +01:00
Eric Blake
796a3798ab bitmaps: Fix typo in function name
Commit a88b179f introduced the ability to set and query bitmap
persistence, but with an atypical spelling.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20190308205845.25734-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12 12:05:49 -04:00
John Snow
c3edf13cd1 block/dirty-bitmaps: prohibit removing readonly bitmaps
Remove is an inherently RW operation, so this will fail anyway, but
we can fail it very quickly instead of trying and failing, so do so.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12 12:05:49 -04:00
John Snow
a54a0c113b block/dirty-bitmaps: prohibit readonly bitmaps for backups
drive and blockdev backup cannot use readonly bitmaps, because the
sync=incremental mechanism actually edits the bitmaps on success.

If you really want to do this operation, use a copied bitmap.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12 12:05:49 -04:00
John Snow
3ae96d6684 block/dirty-bitmaps: add block_dirty_bitmap_check function
Instead of checking against busy, inconsistent, or read only directly,
use a check function with permissions bits that let us streamline the
checks without reproducing them in many places.

Included in this patch are permissions changes that simply add the
inconsistent check to existing permissions call spots, without
addressing existing bugs.

In general, this means that busy+readonly checks become BDRV_BITMAP_DEFAULT,
which checks against all three conditions. busy-only checks become
BDRV_BITMAP_ALLOW_RO.

Notably, remove allows inconsistent bitmaps, so it doesn't follow the pattern.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12 12:05:49 -04:00
John Snow
2f158ca7b6 blockdev: remove unused paio parameter documentation
This field isn't present anymore.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12 12:05:48 -04:00
John Snow
27a1b301a4 block/dirty-bitmaps: unify qmp_locked and user_locked calls
These mean the same thing now. Unify them and rename the merged call
bdrv_dirty_bitmap_busy to indicate semantically what we are describing,
as well as help disambiguate from the various _locked and _unlocked
versions of bitmap helpers that refer to mutex locks.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-03-12 12:05:48 -04:00
Vladimir Sementsov-Ogievskiy
af0a226504 qapi: move to QOM path for x-block-latency-histogram-set
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12 14:26:49 +01:00
Andrey Shinkevich
9ac404c523 block: iterate_format with account of whitelisting
bdrv_iterate_format (which is currently only used for printing out the
formats supported by the block layer) doesn't take format whitelisting
into account.

This creates a problem for tests: they enumerate supported formats to
decide which tests to enable, but then discover that QEMU doesn't let
them actually use some of those formats.

To avoid that, exclude formats that are not whitelisted from
enumeration, if whitelisting is in use.  Since we have separate
whitelists for r/w and r/o, take this a parameter to
bdrv_iterate_format, and print two lists of supported formats (r/w and
r/o) in main qemu.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-08 12:26:45 +01:00
Max Reitz
f30c66ba6e block: Use bdrv_refresh_filename() to pull
Before this patch, bdrv_refresh_filename() is used in a pushing manner:
Whenever the BDS graph is modified, the parents of the modified edges
are supposed to be updated (recursively upwards).  However, that is
nonviable, considering that we want child changes not to concern
parents.

Also, in the long run we want a pull model anyway: Here, we would have a
bdrv_filename() function which returns a BDS's filename, freshly
constructed.

This patch is an intermediate step.  It adds bdrv_refresh_filename()
calls before every place a BDS.filename value is used.  The only
exceptions are protocol drivers that use their own filename, which
clearly would not profit from refreshing that filename before.

Also, bdrv_get_encrypted_filename() is removed along the way (as a user
of BDS.filename), since it is completely unused.

In turn, all of the calls to bdrv_refresh_filename() before this patch
are removed, because we no longer have to call this function on graph
changes.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:25 +01:00
John Snow
0a6c86d024 blockdev: acquire aio_context for bitmap add/remove
When bitmaps are persistent, they may incur a disk read or write when bitmaps
are added or removed. For configurations like virtio-dataplane, failing to
acquire this lock will abort QEMU when disk IO occurs.

We used to acquire aio_context as part of the bitmap lookup, so re-introduce
the lock for just the cases that have an IO penalty. Commit 2119882c removed
these locks, and I failed to notice this when we committed fd5ae4cc, so this
has been broken since persistent bitmaps were introduced.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1672010
Reported-By: Aihua Liang <aliang@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190218233154.19303-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2019-02-19 17:49:43 -05:00
Vladimir Sementsov-Ogievskiy
5d3b4e9946 qapi: add x-debug-query-block-graph
Add a new command, returning block nodes (and their users) graph.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181221170909.25584-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31 00:38:19 +01:00
John Snow
0e2b7f0983 block: remove 'x' prefix from experimental bitmap APIs
The 'x' prefix was added because I was uncertain of the direction we'd
take for the libvirt API. With the general approach solidified, I feel
comfortable committing to this API for 4.0.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-5-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-14 10:09:46 -06:00
John Snow
360d4e4e9a blockdev: n-ary bitmap merge
Especially outside of transactions, it is helpful to provide
all-or-nothing semantics for bitmap merges. This facilitates
the coalescing of multiple bitmaps into a single target for
the "checkpoint" interpretation when assembling bitmaps that
represent arbitrary points in time from component bitmaps.

This is an incompatible change from the preliminary version
of the API.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-4-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-14 10:09:46 -06:00
John Snow
f4de0f8c40 blockdev: abort transactions in reverse order
Presently, we abort transactions in the same order they were processed in.
Bitmap commands, though, attempt to restore backup data structures on abort.

That's not valid, they need to be aborted in reverse chronological order.

Replace the QSIMPLEQ data structure with a QTAILQ one, so we can iterate
in reverse for the abort phase of the transaction.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-2-jsnow@redhat.com>
[eblake: rebase]
Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-14 10:08:47 -06:00
Paolo Bonzini
b58deb344d qemu/queue.h: leave head structs anonymous unless necessary
Most list head structs need not be given a name.  In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed.  In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct.  So clean up everything, not giving a
name except in the rare case where it is necessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Paolo Bonzini
70537ed515 qemu/queue.h: do not access tqe_prev directly
Use the QTAILQ_IN_USE macro instead, it does the same thing but the next
patch will change it to a different definition.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:54 +01:00
Markus Armbruster
b2322003b6 error: Remove NULL checks on error_propagate() calls
Patch created mechanically by rerunning:

  $  spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \
            --macro-file scripts/cocci-macro-file.h \
            --dir . --in-place

Whitespace tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181213173113.11211-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-12-18 14:57:48 +01:00
Alberto Garcia
1b57774f79 block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
This patch replaces the bdrv_reopen() call that set and remove the
BDRV_O_RDWR flag with the new bdrv_reopen_set_read_only() function.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-12-14 11:55:02 +01:00
Alberto Garcia
051a60f6a3 block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
This patch replaces the bdrv_reopen() calls that set and remove the
BDRV_O_RDWR flag with the new bdrv_reopen_set_read_only() function.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-12-14 11:55:02 +01:00
Peter Maydell
d52e1a0e96 blockdev: Consistently use snapshot_node_name in external_snapshot_prepare()
In the function external_snapshot_prepare() we have a
BlockdevSnapshotSync struct, which has the usual combination
of has_snapshot_node_name and snapshot_node_name fields for an
optional field. We set up a local variable
        const char *snapshot_node_name =
            s->has_snapshot_node_name ? s->snapshot_node_name : NULL;

and then mostly use "if (!snapshot_node_name)" for checking
whether we have a snapshot node name. The exception is that in
one place we check s->has_snapshot_node_name instead. This
confuses Coverity (CID 1396473), which thinks it might be
possible to get here with s->has_snapshot_node_name true but
snapshot_node_name NULL, and warns that the call to
qdict_put_str() will segfault in that case.

Make the code consistent and unconfuse Coverity by using
the same check for this conditional that we do in the rest
of the surrounding code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-12 17:46:57 +01:00
zhenwei pi
63d5341f85 blockdev: handle error on block latency histogram set error
Function block_latency_histogram_set may return error, but qapi ignore this.
This can be reproduced easily by qmp command:
virsh qemu-monitor-command INSTANCE '{"execute":"x-block-latency-histogram-set",
"arguments":{"device":"drive-virtio-disk1","boundaries":[10,200,40]}}'
In fact this command does not work, but we still get success result.

qmp_x_block_latency_histogram_set is a batch setting API, report error ASAP.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-12 17:46:57 +01:00
Kevin Wolf
9384a444f6 block: Make auto-read-only=on default for -drive
While we want machine interfaces like -blockdev and QMP blockdev-add to
add as little auto-detection as possible so that management tools are
explicit about their needs, -drive is a convenience option for human
users. Enabling auto-read-only=on by default there enables users to use
read-only images for read-only guest devices without having to specify
read-only=on explicitly. If they try to attach the image to a read-write
device, they will still get an error message.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-11-05 15:09:55 +01:00
Kevin Wolf
e35bdc123a block: Add auto-read-only option
If a management application builds the block graph node by node, the
protocol layer doesn't inherit its read-only option from the format
layer any more, so it must be set explicitly.

Backing files should work on read-only storage, but at the same time, a
block job like commit should be able to reopen them read-write if they
are on read-write storage. However, without option inheritance, reopen
only changes the read-only option for the root node (typically the
format layer), but not the protocol layer, so reopening fails (the
format layer wants to get write permissions, but the protocol layer is
still read-only).

A simple workaround for the problem in the management tool would be to
open the protocol layer always read-write and to make only the format
layer read-only for backing files. However, sometimes the file is
actually stored on read-only storage and we don't know whether the image
can be opened read-write (for example, for NBD it depends on the server
we're trying to connect to). This adds an option that makes QEMU try to
open the image read-write, but allows it to degrade to a read-only mode
without returning an error.

The documentation for this option is consciously phrased in a way that
allows QEMU to switch to a better model eventually: Instead of trying
when the image is first opened, making the read-only flag dynamic and
changing it automatically whenever the first BLK_PERM_WRITE user is
attached or the last one is detached would be much more useful
behaviour.

Unfortunately, this more useful behaviour is also a lot harder to
implement, and libvirt needs a solution now before it can switch to
-blockdev, so let's start with this easier approach for now.

Instead of adding a new auto-read-only option, turning the existing
read-only into an enum (with a bool alternate for compatibility) was
considered, but it complicated the implementation to the point that it
didn't seem to be worth it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-11-05 15:09:55 +01:00
John Snow
b27a6b8b32 block/backup: prohibit backup from using in use bitmaps
If the bitmap is frozen, we shouldn't touch it.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:16 -04:00
John Snow
b053bb5573 block/dirty-bitmaps: prohibit enable/disable on locked/frozen bitmaps
We're not being consistent about this. If it's in use by an operation,
the user should not be able to change the behavior of that bitmap.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:16 -04:00
John Snow
0be37c9e19 block/dirty-bitmaps: allow clear on disabled bitmaps
Similarly to merge, it's OK to allow clear operations on disabled
bitmaps, as this condition only means that they are not recording
new writes. We are free to clear it if the user requests it.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:16 -04:00
John Snow
993edc0ce0 block/dirty-bitmaps: add user_locked status checker
Instead of both frozen and qmp_locked checks, wrap it into one check.
frozen implies the bitmap is split in two (for backup), and shouldn't
be modified. qmp_locked implies it's being used by another operation,
like being exported over NBD. In both cases it means we shouldn't allow
the user to modify it in any meaningful way.

Replace any usages where we check both frozen and qmp_locked with the
new check.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181002230218.13949-2-jsnow@redhat.com
[w/edits Suggested-By: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>]
Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:16 -04:00
Vladimir Sementsov-Ogievskiy
6fd2e40789 qapi: add transaction support for x-block-dirty-bitmap-merge
New action is like clean action: do the whole thing in .prepare and
undo in .abort. This behavior for bitmap-changing actions is needed
because backup job actions use bitmap in .prepare.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:15 -04:00
Vladimir Sementsov-Ogievskiy
5c4cf8b294 blockdev: rename block-dirty-bitmap-clear transaction handlers
Rename block-dirty-bitmap-clear transaction handlers to reuse them for
x-block-dirty-bitmap-merge transaction in the following patch.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:15 -04:00
Vladimir Sementsov-Ogievskiy
fa000f2f9f dirty-bitmap: make it possible to restore bitmap after merge
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with
bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after
merge operation.

This is needed to implement bitmap merge transaction action in further
commit.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:15 -04:00
Vladimir Sementsov-Ogievskiy
56bd662497 dirty-bitmap: rename bdrv_undo_clear_dirty_bitmap
Use more generic names to reuse the function for bitmap merge in the
following commit.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:14 -04:00
Vladimir Sementsov-Ogievskiy
06bf50068a dirty-bitmap: switch assert-fails to errors in bdrv_merge_dirty_bitmap
Move checks from qmp_x_block_dirty_bitmap_merge() to
bdrv_merge_dirty_bitmap(), to share them with dirty bitmap merge
transaction action in future commit.

Note: for now, only qmp_x_block_dirty_bitmap_merge() calls
bdrv_merge_dirty_bitmap().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:14 -04:00
John Snow
945c1ee0cb blockdev-backup: add bitmap argument
It is only an oversight that we don't allow incremental backup with
blockdev-backup. Add the bitmap argument which enables this.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830211605.13683-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-10-29 16:23:14 -04:00
Markus Armbruster
c4f26c9f37 blockdev: Convert drive_new() to Error
Calling error_report() from within a function that takes an Error **
argument is suspicious.  drive_new() calls error_report() even though
it can run within drive_init_func(), which takes an Error ** argument.
drive_init_func()'s caller main(), via qemu_opts_foreach(), is fine
with it, but clean it up anyway:

* Convert drive_new() to Error

* Update add_init_drive() to report the error received from
  drive_new()

* Make main() pass &error_fatal through qemu_opts_foreach(),
  drive_init_func() to drive_new()

* Make default_drive() pass &error_abort through qemu_opts_foreach(),
  drive_init_func() to drive_new()

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181017082702.5581-34-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Kevin Wolf
3c605f4074 commit: Add top-node/base-node options
The block-commit QMP command required specifying the top and base nodes
of the commit jobs using the file name of that node. While this works
in simple cases (local files with absolute paths), the file names
generated for more complicated setups can be hard to predict.

The block-commit command has more problems than just this, so we want to
replace it altogether in the long run, but libvirt needs a reliable way
to address nodes now. So we don't want to wait for a new, cleaner
command, but just add the minimal thing needed right now.

This adds two new options top-node and base-node to the command, which
allow specifying node names instead. They are mutually exclusive with
the old options.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-09-25 15:50:15 +02:00
John Snow
66da04ddd3 blockdev: document transactional shortcomings
Presently only the backup job really guarantees what one would consider
transactional semantics. To guard against someone helpfully adding them
in the future, document that there are shortcomings in the model that
would need to be audited at that time.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180906130225.5118-17-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:31:15 +02:00
John Snow
241ca1ab78 qapi/block-stream: expose new job properties
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-15-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:31:15 +02:00
John Snow
a6b58adec2 qapi/block-mirror: expose new job properties
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-14-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:31:15 +02:00
John Snow
96fbf5345f qapi/block-commit: expose new job properties
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-13-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:31:15 +02:00
John Snow
cf6320df58 block/stream: add block job creation flags
Add support for taking and passing forward job creation flags.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-4-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:31:15 +02:00
John Snow
a1999b3348 block/mirror: add block job creation flags
Add support for taking and passing forward job creation flags.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-3-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:31:15 +02:00
John Snow
5360782d08 block/commit: add block job creation flags
Add support for taking and passing forward job creation flags.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180906130225.5118-2-jsnow@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:31:15 +02:00
Kevin Wolf
6984eb8da2 block: Remove dead deprecation warning code
This reinstates commit 6266e900b8,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

We removed all options from the 'deprecated' array, so the code is dead
and can be removed as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-08-15 12:50:39 +02:00
Kevin Wolf
572023f7b2 block: Remove deprecated -drive option serial
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.

Tests need to be updated to set the serial number with -global instead
of using the -drive option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-08-15 12:50:39 +02:00
Kevin Wolf
7f8fc97155 block: Remove deprecated -drive option addr
This reinstates commit eae3bd1eb7,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-08-15 12:50:39 +02:00
Kevin Wolf
b24ec3c462 block: Remove deprecated -drive geometry options
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-08-15 12:50:39 +02:00
Cornelia Huck
6703db131f Revert "block: Remove deprecated -drive geometry options"
This reverts commit a7aff6dd10.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:12 +02:00
Cornelia Huck
75f4cd2979 Revert "block: Remove deprecated -drive option addr"
This reverts commit eae3bd1eb7.

Reverted to avoid conflicts for geometry options revert.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:12 +02:00
Cornelia Huck
44e8b4689c Revert "block: Remove deprecated -drive option serial"
This reverts commit b008326744.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:11 +02:00
Cornelia Huck
19a49c5637 Revert "block: Remove dead deprecation warning code"
This reverts commit 6266e900b8.

Some deprecated -drive options were still in use by libvirt, only
fixed with libvirt commit b340c6c614 ("qemu: format serial and geometry
on frontend disk device"), which is not yet in any released version
of libvirt.

So let's hold off removing the deprecated options for one more QEMU
release.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:11 +02:00
Vladimir Sementsov-Ogievskiy
930fe17f99 blockdev: enable non-root nodes for backup source
This is needed to implement the image-fleecing workflow where we
create a temporary node backed by an active node, then start
backupdev-backup sync=none from the active node to the temp node.

In this case, the active node is now a root node AND a backing node,
so it no longer qualifies as a root node, so we loosen the restriction
on which nodes can be considered as the source for a backup.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180702194630.9360-2-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-07-02 15:23:54 -05:00
Max Reitz
481debaa32 block/mirror: Add copy mode QAPI interface
This patch allows the user to specify whether to use active or only
background mode for mirror block jobs.  Currently, this setting will
remain constant for the duration of the entire block job.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-18 17:05:16 +02:00
Kevin Wolf
6266e900b8 block: Remove dead deprecation warning code
We removed all options from the 'deprecated' array, so the code is dead
and can be removed as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf
b008326744 block: Remove deprecated -drive option serial
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.

Tests need to be updated to set the serial number with -global instead
of using the -drive option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf
eae3bd1eb7 block: Remove deprecated -drive option addr
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf
a7aff6dd10 block: Remove deprecated -drive geometry options
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-15 14:49:44 +02:00
Max Reitz
609f45ea95 block: Add block-specific QDict header
There are numerous QDict functions that have been introduced for and are
used only by the block layer.  Move their declarations into an own
header file to reflect that.

While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them.  Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Vladimir Sementsov-Ogievskiy
a6e2ca5f65 qapi: add disabled parameter to block-dirty-bitmap-add
This is needed, for example, to create a new bitmap and merge several
disabled bitmaps into a new one. Without this flag we will have to
put block-dirty-bitmap-add and block-dirty-bitmap-disable into one
transaction.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Vladimir Sementsov-Ogievskiy
b598e531f1 qapi: add x-block-dirty-bitmap-merge
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Vladimir Sementsov-Ogievskiy
c649044740 qmp: transaction support for x-block-dirty-bitmap-enable/disable
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-4-jsnow@redhat.com
[Added x- prefix. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Vladimir Sementsov-Ogievskiy
5c5d2e50e5 qapi: add x-block-dirty-bitmap-enable/disable
Expose the ability to turn bitmaps "on" or "off". This is experimental
and principally for the sake of the Libvirt Checkpoints API, and it may
or may not be committed for 3.0.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:32 -04:00
Paolo Bonzini
ab41fc4853 block: remove bdrv_dirty_bitmap_make_anon
All this function is doing will be repeated by
bdrv_do_release_matching_dirty_bitmap_locked, except
resetting bm->persistent.  But even that does not matter
because the bitmap will be freed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180323164254.26487-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-11 14:53:31 -04:00
Kevin Wolf
5f9a6a08e8 job: Add job_dismiss()
This moves block_job_dismiss() to the Job layer.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
3d70ff53b6 job: Move completion and cancellation to Job
This moves the top-level job completion and cancellation functions from
BlockJob to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
7eaa8fb57d job: Move transactions to Job
This moves the logic that implements job transactions from BlockJob to
Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf
62c9e4162a job: Switch transactions to JobTxn
This doesn't actually move any transaction code to Job yet, but it
renames the type for transactions from BlockJobTxn to JobTxn and makes
them contain Jobs rather than BlockJobs

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
3453d97243 job: Move .complete callback to Job
This moves the .complete callback that tells a READY job to complete
from BlockJobDriver to JobDriver. The wrapper function job_complete()
doesn't require anything block job specific any more and can be moved
to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
bb02b65c7d job: Move BlockJobCreateFlags to Job
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
b15de82867 job: Move pause/resume functions to Job
While we already moved the state related to job pausing to Job, the
functions to do were still BlockJob only. This commit moves them over to
Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf
da01ff7f38 job: Move coroutine and related code to Job
This commit moves some core functions for dealing with the job coroutine
from BlockJob to Job. This includes primarily entering the coroutine
(both for the first and reentering) and yielding explicitly and at pause
points.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
2018-05-23 14:30:50 +02:00
Marc-André Lureau
cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Vladimir Sementsov-Ogievskiy
7e5c776d15 qapi: add block latency histogram interface
Set (and clear) histograms through new command
block-latency-histogram-set and show new statistics in
query-blockstats results.

For now, the command is marked experimental with prefix 'x-',
to gain experience with the interface without being stuck
with design decisions.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: fix typos, mention x- prefix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:38 -05:00
Max Reitz
e59a0cf17b block: Handle null backing link
Instead of converting all "backing": null instances into "backing": "",
handle a null value directly in bdrv_open_inherit().

This enables explicitly null backing links for json:{} filenames.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-7-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter order and qapi headers split]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Max Reitz
7dc847ebba qapi: Replace qobject_to_X(o) by qobject_to(X, o)
This patch was generated using the following Coccinelle script:

@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)

and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Liang Li
b76e4458b1 block/mirror: change the semantic of 'force' of block-job-cancel
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.

Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync.  However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration.  Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.

The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused.  However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:39 +01:00
John Snow
b40dacdc7c blockjobs: Expose manual property
Expose the "manual" property via QAPI for the backup-related jobs.
As of this commit, this allows the management API to request the
"concluded" and "dismiss" semantics for backup jobs.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
John Snow
11b61fbc0d blockjobs: add block-job-finalize
Instead of automatically transitioning from PENDING to CONCLUDED, gate
the .prepare() and .commit() phases behind an explicit acknowledgement
provided by the QMP monitor if auto_finalize = false has been requested.

This allows us to perform graph changes in prepare and/or commit so that
graph changes do not occur autonomously without knowledge of the
controlling management layer.

Transactions that have reached the "PENDING" state together can all be
moved to invoke their finalization methods by issuing block_job_finalize
to any one job in the transaction.

Jobs in a transaction with mixed job->auto_finalize settings will all
remain stuck in the "PENDING" state, as if the entire transaction was
specified with auto_finalize = false. Jobs that specified
auto_finalize = true, however, will still not emit the PENDING event.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
John Snow
75f710599f blockjobs: add block_job_dismiss
For jobs that have reached their CONCLUDED state, prior to having their
last reference put down (meaning jobs that have completed successfully,
unsuccessfully, or have been canceled), allow the user to dismiss the
job's lingering status report via block-job-dismiss.

This gives management APIs the chance to conclusively determine if a job
failed or succeeded, even if the event broadcast was missed.

Note: block_job_do_dismiss and block_job_decommission happen to do
exactly the same thing, but they're called from different semantic
contexts, so both aliases are kept to improve readability.

Note 2: Don't worry about the 0x04 flag definition for AUTO_DISMISS, she
has a friend coming in a future patch to fill the hole where 0x02 is.

Verbs:
Dismiss: operates on CONCLUDED jobs only.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
John Snow
0ec4dfb8d6 blockjobs: add block_job_verb permission table
Which commands ("verbs") are appropriate for jobs in which state is
also somewhat burdensome to keep track of.

As of this commit, it looks rather useless, but begins to look more
interesting the more states we add to the STM table.

A recurring theme is that no verb will apply to an 'undefined' job.

Further, it's not presently possible to restrict the "pause" or "resume"
verbs any more than they are in this commit because of the asynchronous
nature of how jobs enter the PAUSED state; justifications for some
seemingly erroneous applications are given below.

=====
Verbs
=====

Cancel:    Any state except undefined.
Pause:     Any state except undefined;
           'created': Requests that the job pauses as it starts.
           'running': Normal usage. (PAUSED)
           'paused':  The job may be paused for internal reasons,
                      but the user may wish to force an indefinite
                      user-pause, so this is allowed.
           'ready':   Normal usage. (STANDBY)
           'standby': Same logic as above.
Resume:    Any state except undefined;
           'created': Will lift a user's pause-on-start request.
           'running': Will lift a pause request before it takes effect.
           'paused':  Normal usage.
           'ready':   Will lift a pause request before it takes effect.
           'standby': Normal usage.
Set-speed: Any state except undefined, though ready may not be meaningful.
Complete:  Only a 'ready' job may accept a complete request.

=======
Changes
=======

(1)

To facilitate "nice" error checking, all five major block-job verb
interfaces in blockjob.c now support an errp parameter:

- block_job_user_cancel is added as a new interface.
- block_job_user_pause gains an errp paramter
- block_job_user_resume gains an errp parameter
- block_job_set_speed already had an errp parameter.
- block_job_complete already had an errp parameter.

(2)

block-job-pause and block-job-resume will no longer no-op when trying
to pause an already paused job, or trying to resume a job that isn't
paused. These functions will now report that they did not perform the
action requested because it was not possible.

iotests have been adjusted to address this new behavior.

(3)

block-job-complete doesn't worry about checking !block_job_started,
because the permission table guards against this.

(4)

test-bdrv-drain's job implementation needs to announce that it is
'ready' now, in order to be completed.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:24 +01:00
Vladimir Sementsov-Ogievskiy
4f43e9535b dirty-bitmap: add locked state
Add special state, when qmp operations on the bitmap are disabled.
It is needed during bitmap migration. "Frozen" state is not
appropriate here, because it looks like bitmap is unchanged.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
2018-03-13 17:05:00 -04:00
Markus Armbruster
9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Vladimir Sementsov-Ogievskiy
3e99da5e76 block: maintain persistent disabled bitmaps
To maintain load/store disabled bitmap there is new approach:

 - deprecate @autoload flag of block-dirty-bitmap-add, make it ignored
 - store enabled bitmaps as "auto" to qcow2
 - store disabled bitmaps without "auto" flag to qcow2
 - on qcow2 open load "auto" bitmaps as enabled and others
   as disabled (except in_use bitmaps)

Also, adjust iotests 165 and 176 appropriately.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180202160752.143796-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-02-13 16:59:58 +01:00
Paolo Bonzini
cb2af9176f block: early check for blockers on drive-mirror
Even if an op blocker is present for BLOCK_OP_TYPE_MIRROR_SOURCE,
it is checked a bit late and the result is that the target is
created even if drive-mirror subsequently fails.  Add an early
check to avoid this.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-02-13 12:27:17 +01:00
Markus Armbruster
452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
47e6b297e7 Include qapi/qmp/qlist.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
15280c360e qdict qlist: Make most helper macros functions
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile.  We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h.  Works,
because we include those wherever the macros get used.

Open-coding these helpers is of dubious value.  Turn them into
functions and drop the includes from the headers.

This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree.  For
qapi/qmp/qnull.h, the number drops from 4552 to 21.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
6b67395762 Eliminate qapi/qmp/types.h
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers.  Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time.  Most of the
places that use it don't need all the headers, either.

Include the necessary headers directly, and drop qapi/qmp/types.h.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster
e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Max Reitz
34ce111141 blockdev: Mark BD-{remove,insert}-medium stable
Now that iotest 093 test proves that the throttling configuration
survives a blockdev-remove-medium/blockdev-insert-medium pair, the
original reason for declaring these commands experimental is gone
(see commit 6e0abc251d).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-5-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-01-23 12:34:42 +01:00
Max Reitz
82fcf66e05 blockdev: Drop BD-{remove,insert}-medium's @device
This is an incompatible change, which is fine as the commands are
experimental.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-4-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-01-23 12:34:42 +01:00
Thomas Huth
0e153b04cc block: Remove the obsolete -drive boot=on|off parameter
It's not working anymore since QEMU v1.3.0 - time to remove it now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-12-22 15:03:41 +01:00
Stefan Hajnoczi
882e9b89af blockdev: add x-blockdev-set-iothread force boolean
When a node is already associated with a BlockBackend the
x-blockdev-set-iothread command refuses to set the IOThread.  This is to
prevent accidentally changing the IOThread when the nodes are in use.

When the nodes are created with -drive they automatically get a
BlockBackend.  In that case we know nothing is using them yet and it's
safe to set the IOThread.  Add a force boolean to override the check.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
ca00bbb153 blockdev: add x-blockdev-set-iothread testing command
Currently there is no easy way for iotests to ensure that a BDS is bound
to a particular IOThread.  Normally the virtio-blk device calls
blk_set_aio_context() when dataplane is enabled during guest driver
initialization.  This never happens in iotests since -machine
accel=qtest means there is no guest activity (including device driver
initialization).

This patch adds a QMP command to explicitly assign IOThreads in test
cases.  See qapi/block-core.json for a description of the command.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
5016f21b70 block: drop unused BlockDirtyBitmapState->aio_context field
The dirty bitmap actions in qmp_transaction have not used AioContext
since the dirty bitmap locking discipline was introduced in commit
2119882c7e ("block: introduce
dirty_bitmap_mutex").  Remove the unused field.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
a36e458cdd block: don't keep AioContext acquired after internal_snapshot_prepare()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:09 +00:00
Stefan Hajnoczi
edd5adeecd block: don't keep AioContext acquired after blockdev_backup_prepare()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Stefan Hajnoczi
66d56054bc block: don't keep AioContext acquired after drive_backup_prepare()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Stefan Hajnoczi
2d24b60b77 block: don't keep AioContext acquired after external_snapshot_prepare()
It is not necessary to hold AioContext across transactions anymore since
bdrv_drained_begin/end() is used to keep the nodes quiesced.  In fact,
using the AioContext lock for this purpose was always buggy.

This patch reduces the scope of AioContext locked regions.  This is not
just a cleanup but also fixes hangs that occur in BDRV_POLL_WHILE()
because it is unware of recursive locking and does not release the
AioContext the necessary number of times to allow progress to be made.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Stefan Hajnoczi
b9464ba19f blockdev: hold AioContext for bdrv_unref() in external_snapshot_clean()
bdrv_unref() requires the AioContext lock because bdrv_flush() uses
BDRV_POLL_WHILE(), which assumes the AioContext is currently held.  If
BDRV_POLL_WHILE() runs without AioContext held the
pthread_mutex_unlock() call in aio_context_release() fails.

This patch moves bdrv_unref() into the AioContext locked region to solve
the following pthread_mutex_unlock() failure:

  #0  0x00007f566181969b in raise () at /lib64/libc.so.6
  #1  0x00007f566181b3b1 in abort () at /lib64/libc.so.6
  #2  0x00005592cd590458 in error_exit (err=<optimized out>, msg=msg@entry=0x5592cdaf6d60 <__func__.23977> "qemu_mutex_unlock") at util/qemu-thread-posix.c:36
  #3  0x00005592cd96e738 in qemu_mutex_unlock (mutex=mutex@entry=0x5592ce9505e0) at util/qemu-thread-posix.c:96
  #4  0x00005592cd969b69 in aio_context_release (ctx=ctx@entry=0x5592ce950580) at util/async.c:507
  #5  0x00005592cd8ead78 in bdrv_flush (bs=bs@entry=0x5592cfa87210) at block/io.c:2478
  #6  0x00005592cd89df30 in bdrv_close (bs=0x5592cfa87210) at block.c:3207
  #7  0x00005592cd89df30 in bdrv_delete (bs=0x5592cfa87210) at block.c:3395
  #8  0x00005592cd89df30 in bdrv_unref (bs=0x5592cfa87210) at block.c:4418
  #9  0x00005592cd6b7f86 in qmp_transaction (dev_list=<optimized out>, has_props=<optimized out>, props=<optimized out>, errp=errp@entry=0x7ffe4a1fc9d8) at blockdev.c:2308

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 10:25:08 +00:00
Manos Pitsidianakis
022cdc9f40 block: move ThrottleGroup membership to ThrottleGroupMember
This commit eliminates the 1:1 relationship between BlockBackend and
throttle group state.  Users will be able to create multiple throttle
nodes, each with its own throttle group state, in the future.  The
throttle group state cannot be per-BlockBackend anymore, it must be
per-throttle node. This is done by gathering ThrottleGroup membership
details from BlockBackendPublic into ThrottleGroupMember and refactoring
existing code to use the structure.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-05 16:47:51 +02:00
Marc-André Lureau
f7abe0ecd4 qapi: Change data type of the FOO_lookup generated for enum FOO
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.

A future patch will generate enums with "holes".  NULL-termination
will cease to work then.

To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.

The sentinel will be dropped next.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
2017-09-04 13:09:13 +02:00
Markus Armbruster
977c736f80 qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04 13:09:13 +02:00
Markus Armbruster
5b5f825d44 qapi: Generate FOO_str() macro for QAPI enum FOO
The next commit will put it to use.  May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-09-04 13:09:13 +02:00
Markus Armbruster
06c60b6c46 qapi: Drop superfluous qapi_enum_parse() parameter max
The lookup tables have a sentinel, no need to make callers pass their
size.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
2017-09-04 13:09:13 +02:00
Markus Armbruster
c42e8742f5 block: Use JSON null instead of "" to disable backing file
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name).  BlockdevRef
value "" is special: "no block device should be referenced."  It's
actually interpreted that way in just one place: optional member
@backing of COW formats.  Semantics:

* Present means "use this block device" as backing storage

* Absent means "default to the one stored in the image"

* Except "" means "don't use backing storage at all"

The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.

The third one overloads the parameter with a second meaning.  The
overloading is *implicit*, i.e. it's not visible in the types.  Works
here, because "" is not a value block device ID.

Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist.  I also find it
ugly.

To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing.  This commit implements
the latter: add JSON null to the values of @backing, deprecate "".

Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null.  Works, because BlockdevRef
occurs only within arguments of blockdev-add.  The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null.  Add a TODO comment for
that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-07-24 13:35:11 +02:00
John Snow
2a32c6e82e blockdev: move BDRV_O_NO_BACKING option forward
For both external_snapshot_prepare and qmp_drive_mirror, we eventually
append the option BDRV_O_NO_BACKING. However, we generally do so after
we create the image.

To accommodate image creation wanting to verify that a backing file
exists or not, add this option prior to create to override checking
the existence of the backing file. This prevents QEMU from trying to
re-open a backing file that's already in use (thanks to qcow2 locking).

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-18 15:27:20 +02:00
Peter Maydell
a309b290aa Error reporting patches for 2017-07-13
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZZ1/BAAoJEDhwtADrkYZTo7oP+gLj4B4kkp/DJnkzfuMMD1Ce
 ZPddZ8Z9RyXE4fS66sq1ODBQo5U+aQQZO7K234+jf8V4cKWW98lpVzLc3YdAHm2U
 ZF6Z9Rji5K4414ZsUcg92Zlovvdaji+mY0ooINav+4mqlONYrz29ntApWc0e0tGc
 e3tj4XDLhJrOM+mIx8vzixFlgSYj+6HgEiybYwolEK5svQbIQao3Y2omyb+zy0w0
 RDT3XQnAAaZSOQAXcJGkhekkyMe0jMHOF0tULLx1uDQYctg9mUGlAGTZ5oTLgSve
 TCpSJwWCAx8XAJMkXyDRrdRFDLeUh6yGY7NTqAL3OuPSoAw9ygKrHyhTavxBJL+W
 rX7Qit3dmVrlZLviwNFQplAKYb10d08vBoKXmrnW5oVCmPEDvJIQfncbucpA/CNS
 ucdJ3RMLuDbbWdl+5tsL7jfiZAG7oSgAePTjN1rm0bDe5JN7NAU8WzHnKfE83iZq
 R+I3hofqGoiXSByYRLamZb+6nsURAxWPhcqcw7hdMsk7UI6dyZwWl9Fnm72w0BZK
 M5LHLkX0LYc+kZjiLKXlNK7Z50bXY0zKQpPCLH3nHA69iMiwVoozrjwa9iCKIxE+
 7ZlOfsu4ztExuicEyTr8b27CBrHjJjYDuFP0hroEOzqCKXUzegoq3oYMGP0doXxe
 o3xcwXVKT/1PudddyR4z
 =tByN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2017-07-13' into staging

Error reporting patches for 2017-07-13

# gpg: Signature made Thu 13 Jul 2017 12:55:45 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-error-2017-07-13:
  Convert error_report*_err() to warn_report*_err()
  error: Implement the warn and free Error functions
  char-socket: Report TCP socket waiting as information
  Convert error_report() to warn_report()
  error: Functions to report warnings and informational messages
  util/qemu-error: Rename error_print_loc() to be more generic
  websock: Don't try to set *errp directly
  block: Don't try to set *errp directly
  xilinx: Fix latent error handling bug

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 09:36:40 +01:00
Alistair Francis
3dc6f86936 Convert error_report() to warn_report()
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.

All of the warnings were changed using these two commands:
    find ./* -type f -exec sed -i \
      's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-13 13:49:58 +02:00
Max Reitz
3a691c50f1 block: Add PreallocMode to blk_truncate()
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Vladimir Sementsov-Ogievskiy
5c36c1af27 qmp: block-dirty-bitmap-remove: remove persistent
Remove persistent bitmap from the storage on block-dirty-bitmap-remove.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-30-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
a3b52535e8 qmp: add x-debug-block-dirty-bitmap-sha256
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-26-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
eb738bb50f qmp: add autoload parameter to block-dirty-bitmap-add
Optional. Default is false.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-25-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
fd5ae4ccbe qmp: add persistent flag to block-dirty-bitmap-add
Add optional 'persistent' flag to qmp command block-dirty-bitmap-add.
Default is false.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-24-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:59 +02:00
Vladimir Sementsov-Ogievskiy
d6883bc968 block/dirty-bitmap: add readonly field to BdrvDirtyBitmap
It will be needed in following commits for persistent bitmaps.
If bitmap is loaded from read-only storage (and we can't mark it
"in use" in this storage) corresponding BdrvDirtyBitmap should be
read-only.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:58 +02:00
Daniel P. Berrange
c01c214b69 block: remove all encryption handling APIs
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Thomas Huth
c616f16e0c blockdev: Print a warning for legacy drive options that belong to -device
We likely do not want to carry these legacy -drive options along forever.
Let's emit a deprecation warning for the -drive options that have a
replacement with the -device option, so that the (hopefully few) remaining
users are aware of this and can adapt their scripts / behaviour accordingly.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10 13:18:06 +02:00
Peter Maydell
84e3d0725b QAPI patches for 2017-06-09
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZSRWrAAoJEDhwtADrkYZTVOQP/RK8br2A1Cn7LeVG6jnKz5hJ
 OqyII77x8I2RachWvnwxQeHPMEVDuz3y2WjL+80s6peXlpR6y/13w7oX0f6aiJuo
 +T9khTqMv2I7HsM5UCsXAJpFPHT7r90b4x8nstY80YLGe7lA7L6yk6PGyCxHThwA
 mOiTKDw6/Xb/yZGrS2Favrun7juNpAs0Ec1IAkaA8xsEgVkd6tDv281rmHqvibl/
 //90VfJp3nHFZ12FCQ1HzA42Eigtmo/fIk9LnAzBoYG0zw0cnzjuv0BNzs/JwuUZ
 /VskeD1cViQ4yzFnPpjOavjYjTN854/JTJzm7gZ7dTQ6/l3ykoY6NDE8p1BLuHlC
 p2RKkg20EeZlpOEtMQ4g6iyG6EUxaKcEiXmQ31LqN/LJwxTYbo5B5nCHMjrt4gxe
 MqFBJQSNsJ7QjZ7Qa7pADMCi/G0m7/0dN8vBqSr4vcbLVvdbw/yb/9s33wXGrUj1
 PyXM2ymi+vvSqcXtNXKshsJLxJSJxO1tm2tRIANDTabQ00yxs8dOYnQnbQFR94fp
 6nrE2PnjZqgqk69aNDJEbngj6Tgx44nyTr1+Q17juZf9nTCE5QmBE1J0IRoykCJn
 E8+T63ZxtIxVV2yLi5xBjmZaZtPyJRGGeUXunA10SuWrHzupEcBuhFhFYd2MFM5L
 fsojALN2K3Gdx2+CmAo2
 =O9Vv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging

QAPI patches for 2017-06-09

# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
  tests/qdict: check more get_try_int() cases
  console: use get_uint() for "head" property
  i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
  numa: use get_uint() for "size" property
  pnv-core: use get_uint() for "core-pir" property
  pvpanic: use get_uint() for "ioport" property
  auxbus: use get_uint() for "addr" property
  arm: use get_uint() for "mp-affinity" property
  xen: use get_uint() for "max-ram-below-4g" property
  pc: use get_uint() for "hpet-intcap" property
  pc: use get_uint() for "apic-id" property
  pc: use get_uint() for "iobase" property
  acpi: use get_uint() for "pci-hole*" properties
  acpi: use get_uint() for various acpi properties
  acpi: use get_uint() for "acpi-pcihp-io*" properties
  platform-bus: use get_uint() for "addr" property
  bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
  aspeed: use {set, get}_uint() for "ram-size" property
  pcihp: use get_uint() for "bsel" property
  pc-dimm: make "size" property uint64
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-22 11:34:39 +01:00
Marc-André Lureau
01b2ffcedd qapi: merge QInt and QFloat in QNum
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.

Add a few more tests while at it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:31 +02:00
Paolo Bonzini
9caa6f3dbe block: split BlockAcctStats creation and setup
block_acct_destroy is called unconditionally in blk_delete, but there is
no BlockAcctStats function that is called unconditionally in blk_new.
Split block_acct_init in two, so that it will be possible to create a
QemuMutex in block_acct_init and destroy it in block_acct_cleanup.

Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-19-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16 07:55:00 +08:00
Paolo Bonzini
2119882c7e block: introduce dirty_bitmap_mutex
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16 07:55:00 +08:00
Paolo Bonzini
d3faa13e5f block: access copy_on_read with atomic ops
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-2-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2017-06-16 07:55:00 +08:00