Add an entry to cover firmware.json (see commit 3a0adfc9bf:
schema that describes the different uses and properties of
virtual machine firmware).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Kashyap Chamarthy <kchamart@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200703183450.32398-1-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The file docs/devel/fuzzing.txt should be in this section, too, and add
myself as a reviewer (since I often take the fuzzer patches through the
qtest-next tree, I should be notified on patches, too).
Message-Id: <20200721053926.17197-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Document the arm 'virt' board, which has been undocumented
for far too long given that it is the main recommended board
type for arm guests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-5-peter.maydell@linaro.org
Add skeletal documentation of the gumstix boards
('connex' and 'verdex').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-4-peter.maydell@linaro.org
Add skeletal documentation of the collie board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-3-peter.maydell@linaro.org
Add skeletal documentation of the canon-a1100 board.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200713175746.5936-2-peter.maydell@linaro.org
Virtual VFAT driver is quite old and rarely used. Set its status
to Odd Fixes.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <20200710190451.761286-1-ppandit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By using invalidated address, guest can do out-of-bounds accesses.
These patches fix the issue by only allowing SD card image sizes
power of 2, and not switching to SEND_DATA state when the address
is invalid (out of range).
This issue was found using QEMU fuzzing mode (using --enable-fuzzing,
see docs/devel/fuzzing.txt) and reported by Alexander Bulekov.
Reproducer:
https://bugs.launchpad.net/qemu/+bug/1880822/comments/1
CI jobs results:
. https://cirrus-ci.com/build/5157142548185088
. https://gitlab.com/philmd/qemu/-/pipelines/166381731
. https://travis-ci.org/github/philmd/qemu/builds/707956535
-----BEGIN PGP SIGNATURE-----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=VZsF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request' into staging
Fix CVE-2020-13253
By using invalidated address, guest can do out-of-bounds accesses.
These patches fix the issue by only allowing SD card image sizes
power of 2, and not switching to SEND_DATA state when the address
is invalid (out of range).
This issue was found using QEMU fuzzing mode (using --enable-fuzzing,
see docs/devel/fuzzing.txt) and reported by Alexander Bulekov.
Reproducer:
https://bugs.launchpad.net/qemu/+bug/1880822/comments/1
CI jobs results:
. https://cirrus-ci.com/build/5157142548185088
. https://gitlab.com/philmd/qemu/-/pipelines/166381731
. https://travis-ci.org/github/philmd/qemu/builds/707956535
# gpg: Signature made Tue 14 Jul 2020 14:54:44 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request:
hw/sd/sdcard: Do not switch to ReceivingData if address is invalid
hw/sd/sdcard: Update coding style to make checkpatch.pl happy
hw/sd/sdcard: Do not allow invalid SD card sizes
hw/sd/sdcard: Simplify realize() a bit
hw/sd/sdcard: Restrict Class 6 commands to SCSD cards
tests/acceptance/boot_linux: Expand SD card image to power of 2
tests/acceptance/boot_linux: Tag tests using a SD card with 'device:sd'
docs/orangepi: Add instructions for resizing SD image to power of two
MAINTAINERS: Cc qemu-block mailing list
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Huacai Chen and Jiaxun Yang step in as new energy [1].
Aurelien Jarno comment [2]:
It happens that I known Huacai Chen from the time he was
upstreaming the Loongson 3 support to the kernel, I have been
testing and reviewing his patches. I also know Jiaxun Yang from
the #debian-mips IRC channel. I know that they are both very
competent and have a good knowledge of the open source world.
I therefore agree that they are good additions to maintain and/or
review the MIPS part of QEMU.
[1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg718434.html
[2] https://www.mail-archive.com/qemu-devel@nongnu.org/msg718738.html
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200701182559.28841-3-aleksandar.qemu.devel@gmail.com>
PMD: [Split patch, added Aurelien's comment]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Huacai Chen <chenhc@lemote.com>
We forgot to include the qemu-block mailing list while adding
this section in commit 076a0fc32a. Fix this.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200630133912.9428-2-f4bug@amsat.org>
List me as the maintainer for OpenSBI firmware related files.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1593177220-28143-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
-----BEGIN PGP SIGNATURE-----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=gFE5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging
8bit AVR port from Michael Rolnik.
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
target/avr/disas: Fix store instructions display order
target/avr/cpu: Fix $PC displayed address
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
target/avr: Add section into QEMU documentation
tests/acceptance: Test the Arduino MEGA2560 board
tests/boot-serial: Test some Arduino boards (AVR based)
hw/avr: Add limited support for some Arduino boards
hw/avr: Add some ATmega microcontrollers
hw/avr: Add support for loading ELF/raw binaries
hw/misc: avr: Add limited support for power reduction device
hw/timer: avr: Add limited support for 16-bit timer peripheral
hw/char: avr: Add limited support for USART peripheral
tests/machine-none: Add AVR support
target/avr: Register AVR support with the rest of QEMU
target/avr: Add support for disassembling via option '-d in_asm'
target/avr: Initialize TCG register variables
target/avr: Add instruction translation - CPU main translation function
target/avr: Add instruction translation - MCU Control Instructions
target/avr: Add instruction translation - Bit and Bit-test Instructions
target/avr: Add instruction translation - Data Transfer Instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test is based on
https://github.com/seharris/qemu-avr-tests/tree/master/free-rtos/Demo
demo which. If working correctly, prints 'ABCDEFGHIJKLMNOPQRSTUVWX' out.
it also demostrates that timer and IRQ are working
As the path name demonstrates, the FreeRTOS tests target a
board based on a ATMega2560 MCU. We have one, the Arduino
MEGA2560.
Complementary documentation:
https://feilipu.me/2012/01/15/ethermega-arduino-mega-2560-and-freertos/https://feilipu.me/2015/11/24/arduino_freertos/ (see 'Compatibility')
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash multiple avocado fixups from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Arduino boards are build with AVR chipsets. Add some of these
boards:
- Arduino Duemilanove
- Arduino Uno
- Arduino Mega
For more information:
https://www.arduino.cc/en/Main/Productshttps://store.arduino.cc/arduino-genuino/most-popular
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Joaquin de Andres <me@xcancerberox.com.ar>
[thuth: sysbus_init_child_obj() ==> object_initialize_child()]
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-26-huth@tuxfamily.org>
Add avr_load_firmware() function to load firmware in ELF or
raw binary format.
[AM: Corrected the type of the variable containing e_flags]
[AM: Moved definition of e_flags conversion function to boot.c]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-24-huth@tuxfamily.org>
[PMD: Replace load_image_targphys() by load_image_mr()]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This is a simple device of just one register, and whenever this
register is written to it calls qemu_set_irq function for each
of 8 bits/IRQs. It is used to implement AVR Power Reduction.
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash include fix and file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-22-huth@tuxfamily.org>
These were designed to facilitate testing but should provide enough
function to be useful in other contexts. Only a subset of the functions
of each peripheral is implemented, mainly due to the lack of a standard
way to handle electrical connections (like GPIO pins).
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Ed Robbins <E.J.C.Robbins@kent.ac.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash info mtree fixes and a file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use qemu_log_mask(LOG_UNIMP), replace goto by return]
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-21-huth@tuxfamily.org>
[PMD: Check cpu-frequency-hz property in realize()]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These were designed to facilitate testing but should provide enough
function to be useful in other contexts. Only a subset of the functions
of each peripheral is implemented, mainly due to the lack of a standard
way to handle electrical connections (like GPIO pins).
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash I/O size fix and file rename from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-20-huth@tuxfamily.org>
Add AVR related definitions into QEMU, make AVR support buildable.
[AM: Remove word 'Atmel' from filenames and all elements of code]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-23-huth@tuxfamily.org>
[PMD: Fixed @avr tag in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
move the vcpu throttling functionality into its own module.
This functionality is not specific to any accelerator,
and it is used currently by migration to slow down guests to try to
have migrations converge, and by the cocoa MacOS UI to throttle speed.
cpu-throttle contains the controls to adjust and inspect throttle
settings, start (set) and stop vcpu throttling, and the throttling
function itself that is run periodically on vcpus to make them take a nap.
Execution of the throttling function on all vcpus is triggered by a timer,
registered at module initialization.
No functionality change.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200629093504.3228-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move arch_init, balloon, cpus, ioport, memory, memory_mapping, qtest.
They are all specific to CONFIG_SOFTMMU.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200629093504.3228-2-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cover accel/stubs/hax-stub.c in the HAXM section.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM files has been moved from target-ARCH to the target/ARCH/
folder in commit fcf5ef2a. Fix the pathname expansion.
Fixes: fcf5ef2a ("Move target-* CPU file into a target/ folder")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar patch was sent a while ago but got lost.
While at it, add a status wiki page.
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200624225850.16982-9-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes GDB hooks for reading from wnd wrtiting to AVR
registers, and xml register definition file as well.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Fixed avr_cpu_gdb_read_register() parameter]
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-7-huth@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This includes definitions of various basic parameters needed
for integration of a new platform into QEMU.
[AM: Split a larger AVR introduction patch into logical units]
Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Co-developed-by: Michael Rolnik <mrolnik@gmail.com>
Co-developed-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Simplify MAINTAINERS right from the start]
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-2-huth@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Script adds ERRP_GUARD() macro invocations where appropriate and
does corresponding changes in code (look for details in
include/qapi/error.h)
Usage example:
spatch --sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h --in-place --no-show-diff \
--max-width 80 FILES...
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci]
My Linaro account is no longer active and stop forwarding emails to me.
Changing it to my current employer domain.
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Message-Id: <20200512170704.9290-1-rad@semihalf.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We can use the image from the advent calendar 2018 to test the sun4u
machine. It's not using the "QEMU advent calendar" string, so we can
not use the do_test_advcal_2018() from boot_linux_console.py, thus
let's also put it into a separate file to also be able to add an
entry to the MAINTAINERS file.
Message-Id: <20200704173519.26087-1-thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I haven't been active for a while. Pass the maintainer hat
forward to Laurent, who has done a stellar job filling in.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200702111636.25792-1-riku.voipio@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create a header file for the hw/misc/max111x device, in the
usual modern style for QOM devices:
* definition of the TYPE_ constants and macros
* definition of the device's state struct so that it can
be embedded in other structs if desired
* documentation of the interface
This allows us to use TYPE_MAX_1111 in the spitz.c code rather
than the string "max1111".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-12-peter.maydell@linaro.org
Add this entry as suggested by Jason and Michael.
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200701124418.63060-1-peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's make sure patches/bug reports find the right person.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-13-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit creates a new 'Miscellaneous' section which hosts a new
'Performance Tools and Tests' subsection. This subsection will contain
the the performance scripts and benchmarks written as a part of the
'TCG Continuous Benchmarking' project. Also, it will be a placeholder
for follow-ups to this project, if any.
Signed-off-by: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200626164546.22102-4-ahmedkhaledkaraman@gmail.com>
Add myself as the maintainer for Loongson-3 virtual platforms, and
also add Jiaxun Yang as the reviewer.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1592995531-32600-5-git-send-email-chenhc@lemote.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl7x6OcACgkQda1lgCoL
QhFfbQf+MXBK1quIxEKW82Rdf3Eh/uKcAqWQ3IAd/wIHqK2fzB68PSroI7ETrwY1
z2oNtg50Wps43eaRjIJVNnEwU1yKGzDcSfjlnabDH7ZbtSx1VlSfGIiufxN6bh0A
bSBMMCPWlL2rNvQ8pI9B5fEqawjTnXn6GIAxDnYSH5wAIenKffmNC4tiN5hm8pTi
0BcsGSNiBb7BtsAokpMCrKAeASnlD1y11cFIlHmOrYOFs+m6uQ03BGu80A7P6fAa
ip93eW4g10bcBMaZhqgspALOgpEArSAg6Kg8Y9XiN9giJmdZXgRS/U1l9bkKSrXV
QGyaPsubLslMw3ZhO1vggoIxjAdwpA==
=Iew1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging
Merge tpm 2020/06/23 v1
# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'ARM SBCon two-wire serial bus interface' is the official
name describing the pair of registers used to bitbanging
I2C in the Versatile boards.
Make the private VersatileI2CState structure as public
ArmSbconI2CState.
Add the TYPE_ARM_SBCON_I2C, alias to our current
TYPE_VERSATILE_I2C model.
Rename the memory region description as 'arm_sbcon_i2c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- List acceptance test reviewers in MAINTAINERS
- Record/Replay tests from Pavel Dovgalyuk
Example of use:
$ avocado --show=app,replay run -t machine:vexpress-a9 tests/acceptance/replay_kernel.py
Fetching asset from tests/acceptance/replay_kernel.py:ReplayKernel.test_arm_vexpressa9
(1/1) tests/acceptance/replay_kernel.py:ReplayKernel.test_arm_vexpressa9:
replay: recording the execution...
replay: finished the recording with log size 204784 bytes
replay: elapsed time 6.44 sec
replay: replaying the execution...
replay: successfully finished the replay
replay: elapsed time 7.97 sec
replay: replay overhead 23.86%
PASS (14.67 s)
Travis-CI:
https://travis-ci.org/github/philmd/qemu/jobs/700787719
-----BEGIN PGP SIGNATURE-----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=KViY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/acceptance-testing-20200622' into staging
Acceptance tests patches
- List acceptance test reviewers in MAINTAINERS
- Record/Replay tests from Pavel Dovgalyuk
Example of use:
$ avocado --show=app,replay run -t machine:vexpress-a9 tests/acceptance/replay_kernel.py
Fetching asset from tests/acceptance/replay_kernel.py:ReplayKernel.test_arm_vexpressa9
(1/1) tests/acceptance/replay_kernel.py:ReplayKernel.test_arm_vexpressa9:
replay: recording the execution...
replay: finished the recording with log size 204784 bytes
replay: elapsed time 6.44 sec
replay: replaying the execution...
replay: successfully finished the replay
replay: elapsed time 7.97 sec
replay: replay overhead 23.86%
PASS (14.67 s)
Travis-CI:
https://travis-ci.org/github/philmd/qemu/jobs/700787719
# gpg: Signature made Mon 22 Jun 2020 09:58:13 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/acceptance-testing-20200622:
tests/acceptance: record/replay tests with advcal images
tests/acceptance: add record/replay test for m68k
tests/acceptance: add record/replay test for ppc64
tests/acceptance: add record/replay test for arm
tests/acceptance: add record/replay test for aarch64
tests/acceptance: add kernel record/replay test for x86_64
tests/acceptance: add base class record/replay kernel tests
MAINTAINERS: Add an entry to review Avocado based acceptance tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add rx-virt target specification document.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20200308130637.37651-1-ysato@users.sourceforge.jp>
[PMD: Cover in MAINTAINERS, rename as gdbsim, use machine argument]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add two tests for the rx-gdbsim machine, based on the recommended
test setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
- U-Boot prompt
- Linux kernel with Sash shell
These are very quick tests:
$ avocado run -t arch:rx tests/acceptance/machine_rx_gdbsim.py
JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
JOB LOG : /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
(1/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot: PASS (0.11 s)
(2/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash: PASS (0.45 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
Tests can also be run with:
$ avocado --show=console run -t arch:rx tests/acceptance/machine_rx_gdbsim.py
console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on. Total pages: 8128
...
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20200224141923.82118-22-ysato@users.sourceforge.jp>
[PMD: Replace obsolete set_machine() by machine tag, and rename as gdbsim]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the RX machine internally simulated in GDB.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp>
[PMD: Split of MCU, rename gdbsim, Add gdbsim-r5f562n7/r5f562n8]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
rx62n - RX62N cpu.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp>
[PMD: Rebased on b77b5b3dc7, split of machine, use &error_abort]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
