bdrv_flush() can fail, and bdrv_flush_all() should return an error as
well if this happens for a block device. It returns the first error
return now, but still at least tries to flush the remaining devices even
in error cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
One of the major reasons for doing something new for -blockdev and
blockdev-add was that the old block layer code parses filenames instead
of just taking them literally. So we should really leave it untouched
when it's passing using the new interfaces (like -drive
file.filename=...).
This allows opening relative file names that contain a colon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since 80ccf93b we flush the block device during close. The
bdrv_drain_all() call should come before bdrv_flush() to ensure guest
write requests have completed. Otherwise we may miss pending writes
when flushing.
Call bdrv_drain_all() again for safety as the final step after
bdrv_flush(). This should not be necessary but we can be paranoid here
in case bdrv_flush() left I/O pending.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
.has_zero_init defaults to 1 for all formats and protocols.
this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().
if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.
during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.
vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.
a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_add_before_write_notifier() function installs a callback that
is invoked before a write request is processed. This will be used to
implement copy-on-write point-in-time snapshots where we need to copy
out old data before overwriting it.
Note that BdrvTrackedRequest is moved to block_int.h since it is passed
to .notify() functions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Turning on discard options in qcow2 doesn't help a lot when the discard
requests that it issues are thrown away by the raw-posix layer. This
patch always enables discard functionality on the protocol level so that
it's the image format's responsibility to send (or not) discard
requests. Requests sent by the guest will be allowed or ignored by the
top level BlockDriverState, which depends on the discard=... option like
before.
In particular, this means that even without specifying options, the
qcow2 default of discarding deleted snapshots actually takes effect now,
both for qemu and qemu-img.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The call to drv->bdrv_reopen_prepare() can fail due to reasons
other than an open failure. Unfortunately, we can't use errno
nor -ret, cause they are not always set.
Stick to a generic error message then.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
This patch is a pure code move patch, except following modification:
1 get_human_readable_size() is changed to static function.
2 dump_human_image_info() is renamed to bdrv_image_info_dump().
3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs)
instead of direct traverse of global array 'bdrv_states'.
4 collect_snapshots() and collect_image_info() are renamed, unused parameter
*fmt in collect_image_info() is removed.
5 code style fix.
To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H
instead of QAPI_H. Now block.h and snapshot.h are at the same level in
include path, block_int.h and qapi.h will both include them.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All snapshot related code, except bdrv_snapshot_dump() and
bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump()
will be moved to another file later. bdrv_is_snapshot() is not related
with internal snapshot. It also fixes small code style errors reported
by check script.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bs_snapshots global variable points to the BlockDriverState which
will be used to save vmstate. This is really a savevm.c concept but was
moved into block.c:bdrv_snapshots() when it became clear that hotplug
could result in a dangling pointer.
While auditing the block layer's global state I came upon bs_snapshots
and realized that a variable is not necessary here. Simply find the
first BlockDriverState capable of internal snapshots each time this is
needed.
The behavior of bdrv_snapshots() is preserved across hotplug because new
drives are always appended to the bdrv_states list. This means that
calling the new find_vmstate_bs() function is idempotent - it returns
the same BlockDriverState unless it was hot-unplugged.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The limit of qcow2 files at least depends on the cluster size. If the
image format has a cluster_size option, suggest to increase it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
filename was still uninitialised when it's used as a parameter to a
tracing function, so let's move the initialisation. Also, commit c2ad1b0c
forgot to add a NULL check, which this patch adds while we're at it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1366645720-11384-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a filename is passed in the driver-specific options from the command
line, the backing file path from the image is ignored now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This allows using the file.filename option instead of the string that
comes from -drive file=... and is passed around as a separate parameter.
The goal is to get rid of this parameter and use the options QDict more
consistently.
With this option you can access not only the top-level image, but
specify a filename for the backing file (currently only if no backing
file exists, but we'll allow overriding it later)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Options starting in "backing." are passed to the backing file now. If
you don't need to specify the filename for the backing file, you can add
it on the command line instead of in the image file:
$ qemu-nbd -t /tmp/test.img
$ qemu-img create -f qcow2 empty.qcow2 1G
$ qemu-system-x86_64 -drive file=empty.qcow2,backing.file.driver=nbd,\
backing.file.host=localhost
Note that this doesn't override the backing filename from the image. If
the image has one, this will fail because NBD doesn't want the options
and a filename at the same time.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Specifying the wrong driver could fail an assertion:
$ qemu-system-x86_64 -drive file.driver=qcow2,file=x
qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file !=
((void *)0)' failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Directly pass the QEMUIOVector on instead of linearising it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The wait_time variable is in seconds. Reflect this in a comment and use
NANOSECONDS_PER_SECOND instead of BLOCK_IO_SLICE_TIME * 10 (which
happens to have the right value).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current slice is extended when an I/O request exceeds the limit.
There is no need to extend the slice every time we check a request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not necessary to adjust the slice time at runtime. We already
extend the current slice in order to carry over accounting into the next
slice. Changing the actual slice time value introduces oscillations.
The guest may experience large changes in throughput or IOPS from one
moment to the next when slice times are adjusted.
Reported-by: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I/O throttling relies on bdrv_acct_done() which is called when a request
completes. This leaves a blind spot since we only charge for completed
requests, not submitted requests.
For example, if there is 1 operation remaining in this time slice the
guest could submit 3 operations and they will all be submitted
successfully since they don't actually get accounted for until they
complete.
Originally we probably thought this is okay since the requests will be
accounted when the time slice is extended. In practice it causes
fluctuations since the guest can exceed its I/O limit and it will be
punished for this later on.
Account for I/O upon submission so that I/O limits are enforced
properly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_open_common() implements direct use of protocols by copying the
pre-opened BlockDriverStates to bs using bdrv_swap(). It did however
first set some fields in bs, which end up in file after the swap. When
bdrv_open() destroys file, it appears to be open, and because it isn't,
qemu could segfault while trying to close it.
Reorder the operations to return immediately in such cases so that file
is correctly detected as closed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After this patch, using -drive with an empty file name continues to open
the file if driver-specific options are used. If no driver-specific
options are specified, the semantics stay as it was: It defines a drive
without an inserted medium.
In order to achieve this, bdrv_open() must be made safe to work with a
NULL filename parameter. The assumption that is made is that only block
drivers which implement bdrv_parse_filename() support using driver
specific options and could therefore work without a filename. These
drivers must make sure to cope with NULL in their implementation of
.bdrv_open() (this is only NBD for now). For all other drivers, the
block layer code will make sure to error out before calling into their
code - they can't possibly work without a filename.
Now an NBD connection can be opened like this:
qemu-system-x86_64 -drive file.driver=nbd,file.port=1234,file.host=::1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_open() uses two different variables called options. Rename one of
them to avoid confusion and to allow the outer one to be accessed
everywhere.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a driver needs structured data and not just a string, it can provide
a .bdrv_parse_filename callback now that parses the command line string
into separate options. Keeping this separate from .bdrv_open_filename
ensures that the preferred way of directly specifying the options always
works as well if parsing the string works.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Specify -drive file.option=... on the command line to pass the option to
the protocol instead of the format driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
brdv_truncate() is also called from readv/writev commands on self-
growing file based storage. this will result in requests waiting
for theirselves to complete.
This reverts commit 9a665b2b86.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
realpath(3) is used to get an absolute path to the image file when
creating a -drive snapshot=on temporary qcow2. This does not work for
protocols since their filenames ("proto:foo:...") do not correspond to
file system paths.
Commit 7c96d46ec2 ("Let snapshot work with
protocols") skipped realpath(3) for protocols. Later on the "raw"
format was introduced and broke the check.
Use path_has_protocol(filename) to decide if this image uses a protocol
or a filename.
Reported-by: Richard Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now bdrv_get_aio_context() is just a stub that calls
qemu_aio_get_context() since the block layer is currently tied to the
main loop AioContext.
Add the stub now so that the block layer can begin accessing its
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The options are passed down to the block drivers, which are supposed to
remove all options they have processed. Anything that is left over in
the end is an unknown option and results in an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
During a commit of 'all' using the HMP non-live commit, the operation
is aborted and returns error on the first error enountered. When
non-COW drives are in use (e.g. ejected floppy, cdrom, or drives without
a backing parent), that means a commit all will return an error of either
-ENOMEDIUM or -ENOTSUP. This is not desirable, so for the 'all' commit
case, only attempt the commit if both bs->drv and bs->backing_hd are
present.
More succinctly: 'commit all' now means a commit on all COW drives.
This means an individual commit to a specific non-COW drive will still
return the appropriate error (-ENOMEDIUM if eject / not present, -ENOTSUP
if no backing file).
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is better to present homogeneous hardware independent of the storage
technology that is chosen on the host, hence we make discard a host
parameter; the user can choose whether to pass it down to the image
format and protocol, or to ignore it.
Using DISCARD with filesystems can cause very severe fragmentation, so it
is left default-off for now. This can change later when we implement the
"anchor" operation for efficient management of preallocated files.
There is still one choice to make: whether DISCARD has an effect on the
dirty bitmap or not. I chose yes, though there is a disadvantage: if
the guest is buggy and issues discards for data that is in use, there
will be no way to migrate storage for that guest without downgrading
the machine type to an older one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_truncate() invalidates the bdrv_check_request() result for
in-flight requests, so there should better be none.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There can be a need to turn output to stdout off. This patch adds a -q option
that enable "Quiet mode". In Quiet mode, only errors are printed out.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's no synchronous wrapper for bdrv_co_is_allocated_above function
so it's not possible to check for sector allocation in an image with
a backing file.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In an image chain, if the base image is smaller than the current
image, we need to make sure to use the current images count of
unallocated blocks once we get to the end of the base image. Without
this change the code will return 0 blocks when it gets to the end
of the base image and mirror_run will fail its assertion.
Signed-off-by: Vishvananda Ishaya <vishvananda@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is needed in the following patch.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.
Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note that resetting bits in the dirty bitmap is done _before_ actually
processing the request. Writes, instead, set bits after the request
is completed.
This way, when there are concurrent write and discard requests, the
outcome will always be that the blocks are marked dirty. This scenario
should never happen, but it is safer to do it this way.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_io_limits_enable() starts a new slice, but does not set io_base
correctly for that slice.
Here is how io_base is used:
bytes_base = bs->nr_bytes[is_write] - bs->io_base.bytes[is_write];
bytes_res = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
if (bytes_base + bytes_res <= bytes_limit) {
/* no wait */
} else {
/* operation needs to be throttled */
}
As a result, any I/O operations that are triggered between now and
bs->slice_end are incorrectly limited. If 10 MB of data has been
written since the VM was started, QEMU thinks that 10 MB of data has
been written in this slice. This leads to a I/O lockup in the guest.
We fix this by delaying the start of a new slice to the next
call of bdrv_exceed_io_limits().
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qiov_is_aligned() function checks whether a QEMUIOVector meets a
BlockDriverState's alignment requirements. This is needed by
virtio-blk-data-plane so:
1. Move the function from block/raw-posix.c to block/block.c.
2. Make it public in block/block.h.
3. Rename to bdrv_qiov_is_aligned().
4. Change return type from int to bool.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A blank CD or DVD is visible as a zero-sized disks. Probing such
disks will lead to an EIO and a failure to start the VM. Treating
them as raw is a better solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows removing of MinGW specific code and improves
reentrancy for POSIX hosts.
[Removed unused ret variable in qemu_get_timedate() to fix warning:
vl.c: In function ‘qemu_get_timedate’:
vl.c:451:16: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable]
-- Stefan Hajnoczi]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes the blkdebug suspend/resume functionality available in
qemu-io. Use it like this:
$ ./qemu-io blkdebug::/tmp/test.qcow2
qemu-io> break write_aio req_a
qemu-io> aio_write 0 4k
qemu-io> blkdebug: Suspended request 'req_a'
qemu-io> resume req_a
blkdebug: Resuming request 'req_a'
qemu-io> wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 0:00:30.71 (133.359788 bytes/sec and 0.0326 ops/sec)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit adds an Error ** argument to bdrv_img_create() and set it
appropriately on error.
Callers of bdrv_img_create() pass NULL for the new argument and still
rely on bdrv_img_create()'s return value. Next commits will change
callers to use the Error object instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes problems that are caused by the additional open/close cycle
of the existing format probing, for example related to qemu-nbd without
-t option or file descriptor passing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of waiting for all requests to complete, wait just for the
specific request that should be cancelled.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The local string tmp_filename is passed to function get_tmp_filename
which expects a string with minimum size MAX_PATH for w32 hosts.
MAX_PATH is 260 and PATH_MAX is 259, so tmp_filename was too short.
Commit eba25057b9 introduced this
regression.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore. Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AIO control blocks are frequently acquired and released because each aio
request involves at least one AIOCB. Therefore, we pool them to avoid
heap allocation overhead.
The problem with the freelist approach in AIOPool is thread-safety. If
we want BlockDriverStates to associate with AioContexts that execute in
multiple threads, then a global freelist becomes a problem.
This patch drops the freelist and instead uses g_slice_alloc() which is
tuned for per-thread fixed-size object pools. qemu_aio_get() and
qemu_aio_release() are now thread-safe.
Note that the change from g_malloc0() to g_slice_alloc() should be safe
since the freelist reuse case doesn't zero the AIOCB either.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Assert that write_compressed is never used with the dirty bitmap.
Setting the bits early is wrong, because a coroutine might concurrently
examine them and copy incomplete data from the source.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mirroring runs without the backing file so that it can be copied outside
QEMU. However, we need to add it at the time the job is completed and
QEMU switches to the target. Factor out the common bits of opening an
image and completing a mirroring operation.
The new function does not assume that the file is closed immediately after
it returns failure, so it keeps the BDRV_O_NO_BACKING flag up-to-date.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qmp_query_blockstat cannot have errors, remove the Error argument and
create a new public function bdrv_query_stats out of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, bdrv_find_backing_image compares bs->backing_file with
what is passed in as a backing_file name. Mismatches may occur,
however, when bs->backing_file and backing_file are not both
absolute or relative.
Use path_combine() to make sure any relative backing filenames are
relative to the current image filename being searched, and then use
realpath() to make all comparisons based on absolute filenames.
If either backing_file or bs->backing_file is determine to be a
protocol, then no filename normalization is performed.
This also changes bdrv_find_backing_image to no longer be recursive,
but iterative.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first user of close notifiers will be the embedded NBD server.
It would be possible to use them to do some of the ad hoc processing
(e.g. for block jobs and I/O limits) that is currently done by
bdrv_close.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason in principle to skip job cancellation and draining
of pending I/O when there is no medium in the disk. Do these unconditionally,
which also prepares the code for the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also, use PATH_MAX, rather than the arbitrary 1024.
Using PATH_MAX is more consistent with other filename-related
variables in this file, like backing_filename and tmp_filename.
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The following behaviors are possible:
'report': The behavior is the same as in 1.1. An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.
'ignore': An I/O error, respectively during a read or a write, will be
ignored. For streaming, the job will complete with an error and the
backing file will be left in place. For mirroring, the sector will be
marked again as dirty and re-examined later.
'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running. This can only be
specified if the block device has rerror=stop and werror=stop or enospc.
'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.
In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.
It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests. In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the common part of IDE/SCSI/virtio error handling to the block
layer. The new function bdrv_error_action subsumes all three of
bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err.
The same scheme will be used for errors in block jobs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Do this while we are touching this part of the code, before introducing
more uses of "int is_read".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers. So rename the enums, while leaving aside the
names of the enum values for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a simple helper function, that will return the base image
of a given image chain.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add bdrv_find_overlay(), and bdrv_drop_intermediate().
bdrv_find_overlay(): given 'bs' and the active (topmost) BDS of an image chain,
find the image that is the immediate top of 'bs'
bdrv_drop_intermediate():
Given 3 BDS (active, top, base), drop images above
base up to and including top, and set base to be the
backing file of top's overlay node.
E.g., this converts:
bottom <- base <- intermediate <- top <- active
to
bottom <- base <- active
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The keep_read_only flag is no longer used, in favor of the bdrv
flag BDRV_O_ALLOW_RDWR.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, bdrv_commit() reopens images r/w itself, via risky
_delete() and _open() calls. Use the new safe method for drive reopen.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is based on Supriya Kannery's bdrv_reopen() patch series.
This provides a transactional method to reopen multiple
images files safely.
Image files are queue for reopen via bdrv_reopen_queue(), and the
reopen occurs when bdrv_reopen_multiple() is called. Changes are
staged in bdrv_reopen_prepare() and in the equivalent driver level
functions. If any of the staged images fails a prepare, then all
of the images left untouched, and the staged changes for each image
abandoned.
Block drivers are passed a reopen state structure, that contains:
* BDS to reopen
* flags for the reopen
* opaque pointer for any driver-specific data that needs to be
persistent from _prepare to _commit/_abort
* reopen queue pointer, if the driver needs to queue additional
BDS for a reopen
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_set_enable_write_cache() sets the bs->enable_write_cache flag,
but without the flag recorded in bs->open_flags, then next time
a reopen() is performed the enable_write_cache setting may be
inadvertently lost.
This will set the flag in open_flags, so it is preserved across
reopens.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I believe the bs->keep_read_only flag is supposed to reflect
the initial open state of the device. If the device is initially
opened R/O, then commit operations, or reopen operations changing
to R/W, are prohibited.
Currently, the keep_read_only flag is only accurate for the active
layer, and its backing file. Subsequent images end up always having
the keep_read_only flag set.
For instance, what happens now:
[ base ] kro = 1, ro = 1
|
v
[ snap-1 ] kro = 1, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
What we want:
[ base ] kro = 0, ro = 1
|
v
[ snap-1 ] kro = 0, ro = 1
|
v
[ snap-2 ] kro = 0, ro = 1
|
v
[ active ] kro = 0, ro = 0
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The caller would not delete temporary file after failed get_tmp_filename().
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The tray status should change also if you eject empty block device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 29cdb251 already added a comment that no unnecessary flushes to
disk will occur, this patch makes the code even get to the point of the
comment. This is mostly theoretical because in practice we only stack
one format on top of one protocol, the former implementing flush_to_os
and the latter only flush_to_disk. It starts to matter when drivers that
are not on top implement flush_to_os.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Create bdrv_get_backing_file_depth() in order to be able to show
in QMP and HMP how many ancestors backing an image a block device
have.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().
The only consumer of the hint is hd_geometry_guess().
The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints. Therefore, drive_init()'s hints are never used.
Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call. Only the first call computes something, subsequent calls
just repeat the first call's results. However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug. Thus, dropping the repeat feature
doesn't break anything now.
If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong. Thus,
dropping the repeat feature prevents future breakage.
This renders the hints unused. Purge them from the block layer.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5bbdbb46 moved it to block.c because "other geometry guessing
functions already reside in block.c". Device-specific functionality
should be kept in device code, not the block layer. Move it back.
Disk geometry guessing is still in block.c. To be moved out in a
later patch series.
Bonus: the floppy type used in pc_cmos_init() now obviously matches
the one in the FDrive. Before, we relied on
bdrv_get_floppy_geometry_hint() picking the same type both in
fd_revalidate() and in pc_cmos_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To prepare move of guess_disk_lchs() into hw/, where it poking
BlockDriverState member io_limits_enabled directly would be unclean.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_floppy_geometry_hint() fails to store through its parameter
drive when bs has a geometry hint. Makes fd_revalidate() assign
random crap to drv->drive.
Has been broken that way for ages. Harmless, because:
* The only way to set a geometry hint is -drive if=none,cyls=...
Since commit c219331e, probably unintentional.
* The only use of drv->drive is as argument to another
bdrv_get_floppy_geometry_hint(). Which doesn't use it, since the
geometry hint is still there.
Drop the broken code, ignore -drive parameter cyls, heads and secs for
floppies even with if=none, just like before commit c219331e. Matches
-help, which explains cyls, heads, secs as "hard disk physical
geometry".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new function can be made a bit nicer than bdrv_append. It swaps the
whole contents, and then swaps back (using the usual t=a;a=b;b=t idiom)
the fields that need to stay on top. Thus, it does not need explicit
bdrv_detach_dev, bdrv_iostatus_disable, etc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While these should not be in use at the time a transaction is started,
a command in the prepare phase of a transaction might have added them,
so they need to be brought over.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So callers don't need to know anything about maximum name length.
Returning a pointer is safe, because the name string lives as long as
the block driver it names, and block drivers don't die.
Requested by Peter Maydell.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Formats are entirely in charge of flushes for metadata writes. For
guest-initiated writes, a writethrough cache is faked in the block layer.
So we can always open in writeback mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because the guest will be able to flip enable_write_cache, the actual
state may not match what is used to open the new snapshot.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to make the formats handle their own flushes
autonomously, while keeping for guests the ability to use a writethrough
cache. Since formats will write metadata via bs->file, bdrv_co_do_writev
is the only place where we need to add a flush.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().
This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In snapshot mode, bdrv_open creates an empty temporary file without
checking for mkstemp or close failure, and ignoring the possibility
of a buffer overrun given a surprisingly long $TMPDIR.
Change the get_tmp_filename function to return int (not void),
so that it can inform its two callers of those failures.
Also avoid the risk of buffer overrun and do not ignore mkstemp
or close failure.
Update both callers (in block.c and vvfat.c) to propagate
temp-file-creation failure to their callers.
get_tmp_filename creates and closes an empty file, while its
callers later open that presumed-existing file with O_CREAT.
The problem was that a malicious user could provoke mkstemp failure
and race to create a symlink with the selected temporary file name,
thus causing the qemu process (usually root owned) to open through
the symlink, overwriting an attacker-chosen file.
This addresses CVE-2012-2652.
http://bugzilla.redhat.com/CVE-2012-2652
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-img info should use the same logic as qemu when printing the
backing file path, or debugging becomes quite tricky. We can also
simplify the output in case the backing file has an absolute path
or a protocol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_close should leave fields in the same state as bdrv_new. It is
not up to bdrv_open_common to fix the mess.
Also, backing_format was not being re-initialized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
path_has_protocol will erroneously return "true" if the colon is part
of a filename. These names are common with stable device names produced
by udev. We cannot fully protect against this in case the filename
does not have a path component (e.g. if the current directory is
/dev/disk/by-path), but in the common case there will be a slash before
and path_has_protocol can easily detect that and return false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Windows, all the logic is already in is_windows_drive and
is_windows_drive_prefix. On POSIX, there is no need to look
out for colons.
The win32 code changes the behaviour in some cases, we could have
something like "d:foo.img". The old code would treat it as relative
path, the new one as absolute. Now the path is absolute, because to
go from c:/program files/blah to d:foo.img you cannot say c:/program
files/blah/d:foo.img. You have to say d:foo.img. But you could also
say it's relative because (I think, at least it was like that in DOS
15 years ago) d:foo.img is relative to the current path of drive D.
Considering how path_is_absolute is used by path_combine, I think it's
better to treat it as absolute.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The limitation on not having I/O after cancellation cannot really be
kept. Even streaming has a very small race window where you could
cancel a job and have it report completion. If this window is hit,
bdrv_change_backing_file() will yield and possibly cause accesses to
dangling pointers etc.
So, let's just assume that we cannot know exactly what will happen
after the coroutine has set busy to false. We can set a very lax
condition:
- if we cancel the job, the coroutine won't set it to false again
(and hence will not call co_sleep_ns again).
- block_job_cancel_sync will wait for the coroutine to exit, which
pretty much ensures no race.
Instead, we track the coroutine that executes the job and put very
strict conditions on what to do while it is quiescent (busy = false).
First of all, the coroutine must never set busy = false while the job
has been cancelled. Second, the coroutine can be reentered arbitrarily
while it is quiescent, so you cannot really do anything but co_sleep_ns at
that time. This condition is obeyed by the block_job_sleep_ns function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function abstracts the pretty complex semantics of the "busy"
member of BlockJob.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are reusing bs->file across close/open, which may not cause any
known bugs but is a recipe for trouble. Prefer bdrv_delete, and
enjoy the new invariant in the implementation of bdrv_delete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is another bug caused by not doing a full cleanup of the BDS
across close/open. This was found with mirroring by Shaolong Hu,
but it can probably be reproduced also with eject or change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_append must also copy open_flags to the top, because the snapshot
has BDRV_O_NO_BACKING set. This causes interesting results if you
later use drive-reopen (not upstream) to reopen the image, and lose
the backing file in the process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QED's opaque data includes a pointer back to the BlockDriverState.
This breaks when bdrv_append shuffles data between bs_new and bs_top.
To avoid this, add a "rebind" function that tells the driver about
the new relationship between the BlockDriverState and its opaque.
The patch also adds rebind to VVFAT for completeness, even though
it is not used with live snapshots.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also reuse elsewhere the new constant for sizeof(unsigned long) * 8.
The dirty bitmap is allocated in bits but declared as unsigned long.
Thus, its memory block is accessed beyond its end unless the image
is a multiple of 64 chunks (i.e. a multiple of 64 MB).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_img_create will temporarily open the backing file to probe its size.
However, this could be done with a read-write open if the wrong flags are
passed to bdrv_img_create. Since there is really no documentation on
what flags can be passed, assume that bdrv_img_create receives the flags
with which the new image will be opened; sanitize them when opening
the backing file.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are needed to print "info block" output correctly. QCOW2 does this
because it needs it to write the header, but QED does not, and common code
is the right place to do it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This check applies to all drivers, but QED lacks it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
[ Iterate until all block devices have processed all requests,
add comments. - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current qemu.git introduces failure with preallocation and some
sizes:
qemu-img create -f qcow2 new.img 976563K -o preallocation=metadata
qemu-img: qemu-coroutine-lock.c:111: qemu_co_mutex_unlock: Assertion
`mutex->locked == 1' failed.
And lock needs to work in coroutine context. So to fix this issue, we
need to make bdrv_create adopt coroutine at first.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.
Use the Error mechanism to report the error where it occurs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block job API uses -errno return values internally and we convert
these to Error in the QMP functions. This is ugly because the Error
should be created at the point where we still have all the relevant
information. More importantly, it is hard to add new error cases to
this case since we quickly run out of -errno values without losing
information.
Go ahead and use Error directly and don't convert later.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The 'qemu-img convert -h' advertise that the default cache mode is
'writeback', while in fact it is 'unsafe'.
This patch 1) fix the help manual and 2) let bdrv_close() call bdrv_flush()
2) is needed because some backend storage doesn't have a self-flush
mechanism(for e.g., sheepdog), so we need to call bdrv_flush() to make
sure the image is really writen to the storage instead of hanging around
writeback cache forever.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If an AIO request is in flight that refers to a BlockDriverState that
has been closed and possibly even freed, more or less anything could
happen. I have seen segfaults, -EBADF return values and qcow2 sometimes
actually catches the situation in bdrv_close() and abort()s.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This function will clear all BDRV_O_INCOMING flags.
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A few fixups for bdrv_append():
The new bs (bs_new) passed into bdrv_append() should be anonymous. Rather
than call bdrv_make_anon() to enforce this, use an assert to catch when a caller
is passing in a bs_new that is not anonymous.
Also, the new top layer should have its backing_format reflect the original
top's format.
And last, after the swap of bs contents, the device_name will have been copied
down. This needs to be cleared to reflect the anonymity of the bs that was
pushed down.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need to do this in every implementation of set_speed
(even though there is only one right now).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Streaming can issue I/O while qcow2_close is running. This causes the
L2 caches to become very confused or, alternatively, could cause a
segfault when the streaming coroutine is reentered after closing its
block device. The fix is to cancel streaming jobs when closing their
underlying device.
The cancellation must be synchronous, on the other hand qemu_aio_wait
will not restart a coroutine that is sleeping in co_sleep. So add
a flag saying whether streaming has in-flight I/O. If the busy flag
is false, the coroutine is quiescent and, when cancelled, will not
issue any new I/O.
This protects streaming against closing, but not against deleting.
We have a reference count protecting us against concurrent deletion,
but I still added an assertion to ensure nothing bad happens.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Monitor operations that manipulate image files must not execute while a
background job (like image streaming) is in progress. This prevents
corruptions from happening when two pieces of code are manipulating the
image file without knowledge of each other.
The monitor "commit" command raises QERR_DEVICE_IN_USE when
bdrv_commit() returns -EBUSY but "commit all" has no error handling.
This is easy to fix, although note that we do not deliver a detailed
error about which device was busy in the "commit all" case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a QAPI/QMP only command to take a snapshot of a group of
devices. This is similar to the blockdev-snapshot-sync command, except
blockdev-group-snapshot-sync accepts a list devices, filenames, and
formats.
It is attempted to keep the snapshot of the group atomic; if the
creation or open of any of the new snapshots fails, then all of
the new snapshots are abandoned, and the name of the snapshot image
that failed is returned. The failure case should not interrupt
any operations.
Rather than use bdrv_close() along with a subsequent bdrv_open() to
perform the pivot, the original image is never closed and the new
image is placed 'in front' of the original image via manipulation
of the BlockDriverState fields. Thus, once the new snapshot image
has been successfully created, there are no more failure points
before pivoting to the new snapshot.
This allows the group of disks to remain consistent with each other,
even across snapshot failures.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies must be read at a specific transfer rate, depending of its own format.
Update floppy description table to include required transfer rate.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's emitted whenever the tray is moved by the guest or by HMP/QMP
commands.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
They are QMP events, not monitor events. Rename them accordingly.
Also, move bdrv_emit_qmp_error_event() up in the file. A new event will
be added soon and it's good to have them next each other.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Copy-on-Read populates the image file with data read from a backing
image. In order to avoid bloating the image file when all zeroes are
read we should scan the buffer and perform an optimized zero write
operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ability to zero regions of an image file is a useful primitive for
higher-level features such as image streaming or zero write detection.
Image formats may support an optimized metadata representation instead
of writing zeroes into the image file. This allows zero writes to be
potentially faster than regular write operations and also preserve
sparseness of the image file.
The .bdrv_co_write_zeroes() interface should be implemented by block
drivers that wish to provide efficient zeroing.
Note that this operation is different from the discard operation, which
may leave the contents of the region indeterminate. That means
discarded blocks are not guaranteed to contain zeroes and may contain
junk data instead.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add bdrv_find_backing_image: given a BlockDriverState pointer, and an id,
traverse the backing image chain to locate the id.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously copy-on-read could only be enabled for all requests to a
block device. This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.
For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image. Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.
Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests. Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Long-running block operations like block migration and image streaming
must have continual access to their block device. It is not safe to
perform operations like hotplug, eject, change, resize, commit, or
external snapshot while a long-running operation is in progress.
This patch adds the missing bdrv_in_use() checks so that block migration
and image streaming never have the rug pulled out from underneath them.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Coverity is confused by this "if" and reports leaks on acb->bh.
The bottom half is always deleted before releasing the AIOCB,
in either bdrv_aio_cancel_em or bdrv_aio_bh_cb.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that early failure of bdrv_aio_writev is not possible anymore,
mcb->num_requests can be set before the loop starts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Debugging a reentrant request deadlock was fun but in the future we need
a quick and obvious way of detecting such bugs. Add an assert that
checks we are not about to deadlock when waiting for another request.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cases beyond the end of the disk image are only implemented for block
drivers that do not provide .bdrv_co_is_allocated(). It's worth making
these cases generic so that block drivers that do implement
.bdrv_co_is_allocated() also get them for free.
Suggested-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Detect overlapping requests and remember to align to cluster boundaries
if the image format uses them. This assumes that allocating I/O is
performed in cluster granularity - which is true for qcow2, qed, etc.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When copy-on-read is enabled it is necessary to wait for overlapping
requests before issuing new requests. This prevents races between the
copy-on-read and a write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_enable_copy_on_read()/bdrv_disable_copy_on_read() functions can
be used to programmatically enable or disable copy-on-read for a block
device. Later patches add the actual copy-on-read logic.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer does not know about pending requests. This information
is necessary for copy-on-read since overlapping requests must be
serialized to prevent races that corrupt the image.
The BlockDriverState gets a new tracked_request list field which
contains all pending requests. Each request is a BdrvTrackedRequest
record with sector_num, nb_sectors, and is_write fields.
Note that request tracking is always enabled but hopefully this extra
work is so small that it doesn't justify adding an enable/disable flag.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces the public bdrv_co_is_allocated() interface which
can be used to query image allocation status while the VM is running.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all block drivers have been converted to
.bdrv_co_is_allocated() we can drop .bdrv_is_allocated().
Note that the public bdrv_is_allocated() interface is still available
but is in fact a synchronous wrapper around .bdrv_co_is_allocated().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the .bdrv_co_is_allocated() interface which is identical
to .bdrv_is_allocated() but runs in coroutine context. Running in
coroutine context implies that other coroutines might be performing I/O
at the same time. Therefore it must be safe to run while the following
BlockDriver functions are in-flight:
.bdrv_co_readv()
.bdrv_co_writev()
.bdrv_co_flush()
.bdrv_co_is_allocated()
The new .bdrv_co_is_allocated() interface is useful because it can be
used when a VM is running, whereas .bdrv_is_allocated() is a synchronous
interface that does not cope with parallel requests.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need for bdrv_commit() to use the BlockDriver
.bdrv_is_allocated() interface directly. Converting to the public
interface gives us the freedom to drop .bdrv_is_allocated() entirely in
favor of a new .bdrv_co_is_allocated() in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image files have two types of data: immutable data that describes things like
image size, backing files, etc. and mutable data that includes offset and
reference count tables.
Today, image formats aggressively cache mutable data to improve performance. In
some cases, this happens before a guest even starts. When dealing with live
migration, since a file is open on two machines, the caching of meta data can
lead to data corruption.
This patch addresses this by introducing a mechanism to invalidate any cached
mutable data a block driver may have which is then used by the live migration
code.
NB, this still requires coherent shared storage. Addressing migration without
coherent shared storage (i.e. NFS) requires additional work.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cache=unsafe completely ignored bdrv_flush, because flushing the host disk
costs a lot of performance. However, this means that qcow2 images (and
potentially any other format) can lose data even after the guest has issued a
flush if the qemu process crashes/is killed. In case of a host crash, data loss
is certainly expected with cache=unsafe, but if just the qemu process dies this
is a bit too unsafe.
Now that we have two separate flush functions, we can choose to flush
everythign to the OS, but don't enforce that it's physically written to the
disk.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 has a writeback metadata cache, so flushing a qcow2 image actually
consists of writing back that cache to the protocol and only then flushes the
protocol in order to get everything stable on disk.
This introduces a separate bdrv_co_flush_to_os to reflect the split.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recent versions of udev always keep the tray locked so that the kernel
can observe "eject request" events (aka tray button presses) even on
discs that aren't mounted. Add support for these events in the ATAPI
and SCSI cd drive device models.
To let management cope with the behavior of udev, an event should also
be added for "tray opened/closed". This way, after issuing an "eject"
command, management can poll until the guests actually reacts to the
command. They can then issue the "change" command after the tray has been
opened, or try with "eject -f" after a (configurable?) timeout. However,
with this patch and the corresponding support in the device models,
at least it is possible to do a manual two-step eject+change sequence.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several BlockDriverState fields are not being reinitialized across
bdrv_close()/bdrv_open(). Make sure they are reset to their default
values.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several block drivers set bs->read_only in .bdrv_open() but
block.c:bdrv_open_common() clobbers its value. Additionally, QED uses
bdrv_is_read_only() in .bdrv_open() to decide whether to perform
consistency checks.
The correct ordering is to initialize bs->read_only from the open flags
before calling .bdrv_open(). This way block drivers can override it if
necessary and can use bdrv_is_read_only() in .bdrv_open().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
tmp_filename was used outside the block it was defined in, i.e. after it went
out of scope. Move its declaration to the top level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previous commits dropped most qobjects usage from qemu modules
(now they are a low level interface used by the QAPI). However,
some modules still include the qemu-objects.h header file.
This commit drops qemu-objects.h from some of those modules
and includes qjson.h instead, which is what they actually need.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The biggest change is to rename its prefix from BDRV_IOS to
BLOCK_DEVICE_IO_STATUS.
Next commit will convert the query-block command to the QAPI
and that's how the enumeration is going to be generated.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
A future commit will convert bdrv_info() to the QAPI and it won't
provide IOS_INVAL.
Luckily all we have to do is to add a new 'iostatus_enabled'
member to BlockDriverState and use it instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since coroutine operation is now mandatory, convert both bdrv_discard
implementations to coroutines. For qcow2, this means taking the lock
around the operation. raw-posix remains synchronous.
The bdrv_discard callback is then unused and can be eliminated.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines. For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.
The bdrv_flush callback is then unused and can be eliminated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This similarly adds support for coroutine and asynchronous discard.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add coroutine support for flush and apply the same emulation that
we already do for read/write. bdrv_aio_flush is simplified to always
go through a coroutine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit cd74d83345e0e3b708330ab8c4cd9111bb82cda6 ("block: switch
bdrv_read()/bdrv_write() to coroutines") removed the bdrv_has_async_rw()
callers. This patch removes bdrv_has_async_rw() since it is no longer
used.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need to emulate .bdrv_read()/.bdrv_write() since these
interfaces are only called if aio and coroutine interfaces are not
present. All valid BlockDrivers must implement either sync, aio, or
coroutine interfaces.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers that implement coroutine functions used to get sync and
aio wrappers. This is no longer necessary since all request processing
now happens in a coroutine. If a block driver implements the coroutine
interface then none of the other interfaces will be invoked.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
More sync, aio, and coroutine unification. Make bdrv_aio_writev() go
through coroutine request processing.
Remove the dirty block callback mechanism which was needed only for aio
processing and can be done more naturally in coroutine context.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The aio write operation marks blocks dirty when the write operation
completes. The coroutine write operation marks blocks dirty before
issuing the write operation.
It seems safest to mark the block dirty when the operation completes so
that anything tracking dirty blocks will not act before the change has
been made to the image file.
Make the coroutine write operation dirty blocks on write completion.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
More sync, aio, and coroutine unification. Make bdrv_aio_readv() go
through coroutine request processing.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_read()/bdrv_write() functions call .bdrv_read()/.bdrv_write().
They should go through bdrv_co_do_readv() and bdrv_co_do_writev()
instead in order to unify request processing code across sync, aio, and
coroutine interfaces. This is also an important step towards removing
BlockDriverState .bdrv_read()/.bdrv_write() in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The public interface for I/O in coroutine context is bdrv_co_readv() and
bdrv_co_writev(). Split out the request processing code into
bdrv_co_do_readv() and bdrv_co_writev() so that it can be called
internally when we refactor all request processing to use coroutines.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The emulation functions which supply default BlockDriver .bdrv_*()
functions given another implemented .bdrv_*() function should not use
public bdrv_*() interfaces. This patch ensures they invoke .bdrv_*()
directly to avoid adding an extra layer of coroutine request processing
and possibly entering an infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will unify block layer request processing across sync, aio, and
coroutines and this means a .bdrv_co_*() emulation function should not
call back into the public interface. There's no need here, just call
.bdrv_aio_*() directly.
The gory details: bdrv_co_io_em() cannot call back into the public
bdrv_aio_*() interface since that will be handled using coroutines,
which causes us to call into bdrv_co_io_em() again in an infinite loop
:).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Contains the I/O status for the given device. The key is only present
if the device supports it and the VM is configured to stop on errors.
Please, check the documentation being added in this commit for more
information.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit adds support to the BlockDriverState type to keep track
of devices' I/O status.
There are three possible status: BDRV_IOS_OK (no error), BDRV_IOS_ENOSPC
(no space error) and BDRV_IOS_FAILED (any other error). The distinction
between no space and other errors is important because a management
application may want to watch for no space in order to extend the
space assigned to the VM and put it to run again.
Qemu devices supporting the I/O status feature have to enable it
explicitly by calling bdrv_iostatus_enable() _and_ have to be
configured to stop the VM on errors (ie. werror=stop|enospc or
rerror=stop).
In case of multiple errors being triggered in sequence only the first
one is stored. The I/O status is always reset to BDRV_IOS_OK when the
'cont' command is issued.
Next commits will add support to some devices and extend the
query-block/info block commands to return the I/O status information.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is useful to know the BlockDriverState as well as the
sector_num/nb_sectors of an emulated .bdrv_co_*() request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
bdrv_open_common() is a useful point to trace since it reveals the
filename and block driver for a given BlockDriverState.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To let device models distinguish between eject and load.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriverState member buffer_alignment is initially 512. The device
model may set them, with bdrv_set_buffer_alignment(). If the device
model gets detached (hot unplug), the device's alignment is left
behind. Only okay because device hot unplug automatically destroys
the BlockDriverState. But that's a questionable feature, best not to
rely on it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Device models should be able to set it without an unclean include of
block_int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Need to ask the device, so this requires new BlockDevOps member
is_tray_open().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's a confused mess (see previous commit). No users remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriverState member removable is a confused mess. It is true when
an ide-cd, scsi-cd or floppy qdev is attached, or when the
BlockDriverState was created with -drive if={floppy,sd} or -drive
if={ide,scsi,xen,none},media=cdrom ("created removable"), except when
an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached.
Three users remain:
1. eject_device(), via bdrv_is_removable() uses it to determine
whether a block device can eject media.
2. bdrv_info() is monitor command "info block". QMP documentation
says "true if the device is removable, false otherwise". From the
monitor user's point of view, the only sensible interpretation of
"is removable" is "can eject media with monitor commands eject and
change".
A block device can eject media unless a device is attached that
doesn't support it. Switch the two users over to new
bdrv_dev_has_removable_media() that returns exactly that.
3. bdrv_getlength() uses to suppress its length cache when media can
change (see commit 46a4e4e6). Media change is either monitor
command change (updates the length cache), monitor command eject
(doesn't update the length cache, easily fixable), or physical
media change (invalidates length cache, not so easily fixable).
I'm refraining from improving anything here, because this series is
long enough already. Instead, I simply switch it over to
bdrv_dev_has_removable_media() as well.
This changes the behavior of the length cache and of monitor commands
eject and change in two cases:
a. drive not created removable, no device attached
The commit makes the drive removable, and defeats the length cache.
Example: -drive if=none
b. drive created removable, but the attached drive is non-removable,
and doesn't call bdrv_set_removable(..., 0) (most devices don't)
The commit makes the drive non-removable, and enables the length
cache.
Example: -drive if=xen,media=cdrom -M xenpv
The other non-removable devices that don't call
bdrv_set_removable() can't currently use a drive created removable,
either because they aren't qdevified, or because they lack a drive
property. Won't stay that way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Requires new BlockDevOps member is_medium_locked(). Implement for IDE
and SCSI CD-ROMs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The device model knows best when to accept the guest's eject command.
No need to detour through the block layer.
bdrv_eject() can't fail anymore. Make it void.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is
open. Unfortunately, there are two different kinds of users, with
conflicting needs.
1. Device models using bdrv_eject(), currently ide-cd and scsi-cd.
They expect bdrv_is_inserted() to reflect the tray status. Commit
4be9762a makes them happy.
2. Code that wants to know whether a BlockDriverState has media, such
as find_image_format(), bdrv_flush_all(). Commit 4be9762a makes them
unhappy. In particular, it breaks flush on VM stop for media ejected
by the guest.
Revert the change to bdrv_is_inserted(). Check the tray status in the
device models instead.
Note on IDE: Since only ATAPI devices have a tray, and they don't
accept ATA commands since the recent commit "ide: Reject ATA commands
specific to drive kinds", checking in atapi.c suffices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
savevm and loadvm silently ignore block devices with removable media,
such as floppies and SD cards. Rolling back a VM to a previous
checkpoint will *not* roll back writes to block devices with removable
media.
Moreover, bdrv_is_removable() is a confused mess, and wrong in at
least one case: it considers "-drive if=xen,media=cdrom -M xenpv"
removable. It'll be cleaned up later in this series.
Read-only block devices are also ignored, but that's okay.
Fix by ignoring only read-only block devices and empty block devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change (!bdrv_is_removable(bs) || bdrv_is_inserted(bs)) to just
bdrv_is_inserted(). Rationale:
The value of bdrv_is_removable(bs) matters only when
bdrv_is_inserted(bs) is false.
bdrv_is_inserted(bs) is true when bs is open (bs->drv != NULL) and
not an empty host drive (CD-ROM or floppy).
Therefore, bdrv_is_removable(bs) matters only when:
1. bs is not open
old: may call bdrv_flush(bs), which does nothing
new: won't call
2. bs is an empty host drive
old: may call bdrv_flush(bs), which calls driver method
raw_flush(), which calls fdatasync() or equivalent, which
can't do anything useful while the drive is empty
new: won't call
Result is bs->drv && !bdrv_is_read_only(bs) && bdrv_is_inserted(bs).
bdrv_is_inserted(bs) implies bs->drv. Drop the redundant test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Multiplexing callbacks complicates matters needlessly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.
While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Account the total latency for read/write/flush requests. This allows
management tools to average it based on a snapshot of the nr ops
counters and allow checking for SLAs or provide statistics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and
make the hardware models call directly into the accounting helpers.
This means:
- we do not count internal requests from image formats in addition
to guest originating I/O
- we do not double count I/O ops if the device model handles it
chunk wise
- we only account I/O once it actuall is done
- can extent I/O accounting to synchronous or coroutine I/O easily
- implement I/O latency tracking easily (see the next patch)
I've conveted the existing device model callers to the new model,
device models that are using synchronous I/O and weren't accounted
before haven't been updated yet. Also scsi hasn't been converted
to the end-to-end accounting as I want to defer that after the pending
scsi layer overhaul.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file
I/O with no disk write cache presented to the guest.
This mode is useful when guests may not be sending flushes when
appropriate and therefore leave data at risk in case of power failure.
When cache=directsync is used, write operations are only completed to
the guest when data is safely on disk.
This new mode is like cache=writethrough but it bypasses the host page
cache.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces bdrv_parse_cache_flags() which sets open flags
given a cache mode. Previously this was duplicated in blockdev.c and
qemu-img.c.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix code format to make checkpatch.pl happy.
Signed-off-by: Robert Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If we're already in a coroutine, there is no reason to use the synchronous
version of block layer functions when a coroutine one exists. This makes
bdrv_read/write/flush use bdrv_co_* when used inside a coroutine.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The purpose of AsyncContexts was to protect qcow and qcow2 against reentrancy
during an emulated bdrv_read/write (which includes a qemu_aio_wait() call and
can run AIO callbacks of different requests if it weren't for AsyncContexts).
Now both qcow and qcow2 are protected by CoMutexes and AsyncContexts can be
removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to be able to call bdrv_co_readv/writev for drivers that don't
implement the functions natively, add an emulation that uses the AIO functions
to implement them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the bdrv_co_readv/writev callbacks to implement bdrv_aio_readv/writev and
bdrv_read/write if a driver provides the coroutine version instead of the
synchronous or AIO version.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new block driver callbacks bdrv_co_readv/writev, which work on a
QEMUIOVector like bdrv_aio_*, but don't need a callback. The function may only
be called inside a coroutine, so a block driver implementing this interface can
yield instead of blocking during I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit aea2a33c made bdrv_eject() obey the locked flag. Correct for
medium eject (eject_flag set), incorrect for medium load (eject_flag
clear). See MMC-5 Table 341 "Actions for Lock/Unlock/Eject".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callees always return 0, except for FreeBSD's cdrom_eject(), which
returns -ENOTSUP when the device is in a terminally wedged state.
The only caller is bdrv_eject(), and it maps -ENOTSUP to 0 since
commit 4be9762a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriverState members change_cb and change_opaque are initially
null. The device model may set them, with bdrv_set_change_cb(). If
the device model gets detached (hot unplug), they're left dangling.
Only safe because device hot unplug automatically destroys the
BlockDriverState. But that's a questionable feature, best not to rely
on it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img.c wants to count allocated file size of image. Previously it
counts a single bs->file by 'stat' or Window API. As VMDK introduces
multiple file support, the operation becomes format specific with
platform specific meanwhile.
The functions are moved to block/raw-{posix,win32}.c and qemu-img.c calls
bdrv_get_allocated_file_size to count the bs. And also added VMDK code
to count his own extents.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers that don't support creating images don't have a size option. Fail
gracefully instead of segfaulting when trying to access the option's value.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change BDRV_O_NOCACHE to only imply bypassing the host OS file cache,
but no writeback semantics. All existing callers are changed to also
specify BDRV_O_CACHE_WB to give them writeback semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No users of bdrv_get_type_hint() left. bdrv_set_type_hint() can make
the media removable by side effect. Make that explicit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
query-block's specification documents response member "type" with
values "hd", "cdrom", "floppy", "unknown".
Its value is unreliable: a block device used as floppy has type
"floppy" if created with if=floppy, but type "hd" if created with
if=none.
That's because with if=none, the type is at best a declaration of
intent: the drive can be connected to any guest device. Its type is
really the guest device's business. Reporting it here is wrong.
No known user of QMP uses "type". It's unlikely that any unknown
users exist, because its value is useless unless you know how the
block device was created. But then you also know the true value.
Fixing the broken value risks breaking (hypothetical!) clients that
somehow rely on the current behavior. Not fixing the value risks
breaking (hypothetical!) clients that rely on the value to be
accurate. Can't entirely avoid hypothetical lossage. Change the
value to be always "unknown".
This makes "info block" always report "type=unknown". Pointless.
Change it to not report the type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The code changed here is an unused data type name (evt_flush_occurred).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The block layer caches the device size to avoid doing lseek(fd, 0,
SEEK_END) every time this value is needed. For removable media the
device size becomes stale if a new medium is inserted. This patch
simply prevents device size caching for removable media.
A smarter solution is to update the cached device size when a new medium
is inserted. Given that there are currently bugs with CD-ROM media
change I do not want to implement that approach until we've gotten
things correct first.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It can be handy to know when the guest locks/unlocks the CD-ROM tray.
This trace event makes that possible.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When removing a drive from the host-side via drive_del we currently have
the following path:
drive_del
qemu_aio_flush()
bdrv_close() // zaps bs->drv, which makes any subsequent I/O get
// dropped. Works as designed
drive_uninit()
bdrv_delete() // frees the bs. Since the device is still connected to
// bs, any subsequent I/O is a use-after-free.
The value of bs->drv becomes unpredictable on free. As long as it
remains null, I/O still gets dropped, however it could become non-null
at any point after the free resulting SEGVs or other QEMU state
corruption.
To resolve this issue as simply as possible, we can chose to not
actually delete the BlockDriverState pointer. Since bdrv_close()
handles setting the drv pointer to NULL, we just need to remove the
BlockDriverState from the QLIST that is used to enumerate the block
devices. This is currently handled within bdrv_delete, so move this
into its own function, bdrv_make_anon().
The result is that we can now invoke drive_del, this closes the file
descriptors and sets BlockDriverState->drv to NULL which prevents futher
IO to the device, and since we do not free BlockDriverState, we don't
have to worry about the copy retained in the block devices.
We also don't attempt to remove the qdev property since we are no longer
deleting the BlockDriverState on drives with associated drives. This
also allows for removing Drives with no devices associated either.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the block device has been closed, we no longer have a medium to submit
IO against, check for this before submitting io. This prevents a segfault
further in the code where we dereference elements of the block driver.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a trace event for bdrv_aio_flush() to complement the existing
bdrv_aio_readv() and bdrv_aio_writev() events.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Other geometry guessing functions already reside in block.c.
Remove some unused or debugging only fields.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Set block device in use during block migration, disallow drive_del and
bdrv_truncate for in use devices.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Certain operations such as drive_del or resize cannot be performed
while external users (eg. block migration) reference the block device.
Add a flag to indicate that.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extend the change_cb callback with a reason argument, and use it
to tell drivers about size changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The backing format should be honored during image creation. For some
reason we currently use the image format to open the backing file. This
fails when the backing file has a different format than the image being
created. Keep the image and backing format drivers completely separate.
Also print the backing filename if there is an error opening the backing
file instead of the image filename.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid a warning with GCC 4.6.0:
/src/qemu/block.c: In function 'bdrv_img_create':
/src/qemu/block.c:2862:25: error: variable 'fmt' set but not used [-Werror=unused-but-set-variable]
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a new bdrv_discard method to free blocks in a mapping image, and a new
drive property to set the granularity for these discard. If no discard
granularity support is set discard support is disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin suggested to have bdrv_img_create() return proper -errno values
on error.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch re-factors img_create() moving the code doing the actual
work into block.c where it can be shared with QEMU. This is needed to
be able to create images from QEMU to be used for live snapshots.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Backing filenames may contain a protocol. The code currently doesn't
consider this case and produces filenames that embed "<protocol>:".
Don't combine filenames if the backing filename contains a protocol.
Based on an earlier patch by Anthony Liguori <aliguori@us.ibm.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_find_protocol() function returns NULL if an unknown protocol
name is given. It returns the "file" protocol when the filename
contains no protocol at all. This makes it difficult to distinguish
between paths which contain a protocol and those which do not.
Factor out a helper function that tests whether or not a filename has a
protocol. The next patch makes use of this function.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filenames may start with "<protocol>:" to explicitly use a protocol like
nbd. Filenames with unknown protocols are rejected in most of QEMU
except for bdrv_create_file(). Even if a file with an invalid filename
can be created, QEMU cannot use it since all the other relevant
functions reject such paths. Make bdrv_create_file() consistent.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sectors are marked dirty in the bitmap on AIO submission. This is wrong
since data has not reached storage.
Set a given sector as dirty in the dirty bitmap on AIO completion, so that
reading a sector marked as dirty is guaranteed to return uptodate data.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Otherwise upper 32 bits of bitmap entries are not correctly calculated.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This changes bdrv_flush to return 0 on success and -errno in case of failure.
It's a requirement for implementing proper error handle in users of bdrv_flush.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In order to backup snapshots, created from QCOW2 iamge, we want to copy snapshots out of QCOW2 disk to a seperate storage.
The following patch adds a new option in "qemu-img": qemu-img convert -f qcow2 -O qcow2 -s snapshot_name src_img bck_img.
Right now, it only supports to copy the full snapshot, delta snapshot is on the way.
Changes from V1: all the comments from Kevin are addressed:
Add read-only checking
Fix coding style
Change the name from bdrv_snapshot_load to bdrv_snapshot_load_tmp
Signed-off-by: Disheng Su <edison@cloud.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Observing block layer aio readv/writev operations is useful for
debugging image formats or understanding guest disk I/O patterns.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 79368c81bf.
Conflicts:
block.c
I haven't been able to come up with a solution yet for the corruption caused by
unaligned requests from the IDE disk so revert until a solution can be written.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Arguably we should re-open the backing file with the backing file format and
not with the format of the snapshot image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_eject() gets called when a device model opens or closes the tray.
If the block driver implements method bdrv_eject(), that method gets
called. Drivers host_cdrom implements it, and it opens and closes the
physical tray, and nothing else. When a device model opens, then
closes the tray, media changes only if the user actively changes the
physical media while the tray is open. This is matches how physical
hardware behaves.
If the block driver doesn't implement method bdrv_eject(), we do
something quite different: opening the tray severs the connection to
the image by calling bdrv_close(), and closing the tray does nothing.
When the device model opens, then closes the tray, media is gone,
unless the user actively inserts another one while the tray is open,
with a suitable change command in the monitor. This isn't how
physical hardware behaves. Rather inconvenient when programs
"helpfully" eject media to give you a chance to change it. The way
bdrv_eject() behaves here turns that chance into a must, which is not
what these programs or their users expect.
Change the default action not to call bdrv_close(). Instead, note the
tray status in new BlockDriverState member tray_open. Use it in
bdrv_is_inserted().
Arguably, the device models should keep track of tray status
themselves. But this is less invasive.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Assuming that any image on a block device is not properly zero-initialized is
actually wrong: Only raw images have this problem. Any other image format
shouldn't care about it, they initialize everything properly themselves.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_commit copies the image to its backing file sector by sector, which
is (surprise!) relatively slow. Let's take a larger buffer and handle more
sectors at once if possible.
With a 1G qcow2 file, this brought the time bdrv_commit takes down from
5:06 min to 1:14 min for me.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block device change command did not copy BDRV_O_SNAPSHOT flag. Thus
the new image did not have this flag and the file got deleted during
opening.
Fix by copying BDRV_O_SNAPSHOT flag.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"No such file or directory" is a misleading error message
when a user tries to open a file with wrong permissions.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CVE-2008-2004 described a vulnerability in QEMU whereas a malicious user could
trick the block probing code into accessing arbitrary files in a guest. To
mitigate this, we added an explicit format parameter to -drive which disabling
block probing.
Fast forward to today, and the vast majority of users do not use this parameter.
libvirt does not use this by default nor does virt-manager.
Most users want block probing so we should try to make it safer.
This patch adds some logic to the raw device which attempts to detect a write
operation to the beginning of a raw device. If the first 4 bytes happen to
match an image file that has a backing file that we support, it scrubs the
signature to all zeros. If a user specifies an explicit format parameter, this
behavior is disabled.
I contend that while a legitimate guest could write such a signature to the
header, we would behave incorrectly anyway upon the next invocation of QEMU.
This simply changes the incorrect behavior to not involve a security
vulnerability.
I've tested this pretty extensively both in the positive and negative case. I'm
not 100% confident in the block layer's ability to deal with zero sized writes
particularly with respect to the aio functions so some additional eyes would be
appreciated.
Even in the case of a single sector write, we have to make sure to invoked the
completion from a bottom half so just removing the zero sized write is not an
option.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This distinguishes between harmless leaks and real corruption. Hopefully users
better understand what qemu-img check wants to tell them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
People think that their images are corrupted when in fact there are just some
leaked clusters. Differentiating several error cases should make the messages
more comprehensible.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't try to be clever by freeing all temporary data and calling all callbacks
when the return value (an error) is certain. Doing so has at least two
important problems:
* The temporary data that is freed (qiov, possibly zero buffer) is still used
by the requests that have not yet completed.
* Calling the callbacks for all requests in the multiwrite means for the caller
that it may free buffers etc. which are still in use.
Just remember the error value and do the cleanup when all requests have
completed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_writev may call the callback immediately (and it will commonly do so
in error cases). Current code doesn't consider this. For details see the
comment added by this patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriverState member removable controls whether virtual media
change (monitor commands change, eject) is allowed. It is set when
the "type hint" is BDRV_TYPE_CDROM or BDRV_TYPE_FLOPPY.
The type hint is only set by drive_init(). It sets BDRV_TYPE_FLOPPY
for if=floppy. It sets BDRV_TYPE_CDROM for media=cdrom and if=ide,
scsi, xen, or none.
if=ide and if=scsi work, because the type hint makes it a CD-ROM.
if=xen likewise, I think.
For the same reason, if=none works when it's used by ide-drive or
scsi-disk. For other guest devices, there are problems:
* fdc: you can't change virtual media
$ qemu [...] -drive if=none,id=foo,... -global isa-fdc.driveA=foo
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) eject foo
Device 'foo' is not removable
unless you add media=cdrom, but that makes it readonly.
* virtio: if you add media=cdrom, you can change virtual media. If
you eject, the guest gets I/O errors. If you change, the guest sees
the drive's contents suddenly change.
* scsi-generic: if you add media=cdrom, you can change virtual media.
I didn't test what that does to the guest or the physical device,
but it can't be pretty.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
savevm.c keeps a pointer to the snapshot block device. If you manage
to get that device deleted, the pointer dangles, and the next snapshot
operation will crash & burn. Unplugging a guest device that uses it
does the trick:
$ MALLOC_PERTURB_=234 qemu-system-x86_64 [...]
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) info snapshots
No available block device supports snapshots
(qemu) drive_add auto if=none,file=tmp.qcow2
OK
(qemu) device_add usb-storage,id=foo,drive=none1
(qemu) info snapshots
Snapshot devices: none1
Snapshot list (from none1):
ID TAG VM SIZE DATE VM CLOCK
(qemu) device_del foo
(qemu) info snapshots
Snapshot devices:
Segmentation fault (core dumped)
Move management of that pointer to block.c, and zap it when the device
it points becomes unusable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo
happily creates two SCSI disks connected to the same block device.
It's all downhill from there.
Device usb-storage deliberately attaches twice to the same blockdev,
which fails with the fix in place. Detach before the second attach
there.
Also catch attempt to delete while a guest device model is attached.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To fix https://bugs.launchpad.net/qemu/+bug/597402 where qemu fails to
call unlink() on temporary snapshots due to bs->is_temporary getting clobbered
in bdrv_open_common() after being set in bdrv_open() which calls the former.
We don't need to initialize bs->is_temporary in bdrv_open_common().
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before the raw/file split we used to allow filenames with colons for host
device only. While this was more by accident than by design people rely
on it, so we need to bring it back.
So move the host device probing to be before the protocol detection
again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new functions that write and flush the written data to disk immediately.
This is what needs to be used for image format metadata to maintain integrity
for cache=... modes that don't use O_DSYNC. (Actually, we only need barriers,
and therefore the functions are defined as such, but flushes is what is
implemented in this patch - we can try to change that later)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix a warning from OpenBSD gcc (3.3.5 (propolice)):
/src/qemu/block.c: In function `bdrv_info_stats_bs':
/src/qemu/block.c:1548: warning: long long int format, long unsigned
int arg (arg 6)
There may be also truncation effects.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a more flexible alternative to bdrv_iterate().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
