A typo in the usermode address calculation path; R3 used where R2 needed.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Use ld4 not ld8 for reading the tlb of 32-bit targets.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
The port was not properly merged following
86feb1c860
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Fix compilation error when GUEST_BASE is not defined.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
The arguments to tcg_gen_helper32 for these functions were not
updated correctly in rev 2bece2c883.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
I make no claims that this is accurate or exhaustive but I think it's a
reasonable place to start.
As the file mentions, the purpose of this file is to give contributors
information about who they can go to with questions about a particular piece of
code or who they can ask for review.
If you sign up for a piece of code and indicate that it's Maintained or
Supported, please be prepared to be responsive to questions about that
subsystem.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Sort alphabetically
- Copy in instructions from linux MAINTAINERS
- Fix entries based on review feedback
Whenever SSBM is reset in the command register all state information is lost.
Restarting DMA means that current_addr must be reset to the base address of the
PRD table. The OS is not required to change the base address register before
starting a DMA operation, it can reuse the value it wrote for an earlier
request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
You can only start a DMA transfer if it's not running yet, and you can only
cancel it if it's running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
BMIDEA in the status register must be cleared on error. This makes FreeBSD
respond (more) correctly to I/O errors.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Several places that stop a DMA transfer duplicate this code. Factor it out into
a common function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device. Split the common code frm the PCI code so
that that can be configures independantly.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Fix breakage from previous commit (missing pci.mak, and incorrect
include in default-configs/s390x-softmmu.mak).
Signed-off-by: Paul Brook <paul@codesourcery.com>
Make virtio devices optional. Selecting individual devices is not useful
as the host bindings are all in one file.
Signed-off-by: Paul Brook <paul@codesourcery.com>
We parse the CDB twice, which is completely unnecessary.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current sense handling in scsi-bus is only used by the
scsi-disk driver; the scsi-generic driver is using its own.
So we should move the current sense handling into the
scsi-disk driver.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should announce and support the block device characterics page
only on block devices, not on CDROMs. And the VPD page 0x83 has
an off-by-one error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Traditionally, the linux stack is using SCSI status codes
which are shifted by one as compared to those defined in SAM.
A SCSI emulation should naturally return the SAM defined codes,
not the linux ones.
So to avoid any confusion this patch modifies the existing
definitions to match those found in SAM and removes any
(now obsolete) byte-shift from the returned status codes.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The SCSI parallel interface has a limit of 8 devices, but
not the SCSI stack in general. So we should be removing the
hard-coded limit and use MAX_SCSI_DEVS instead.
And we only need to scan those devices which are allocated
by the bus.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All drivers use bs->file instead of s->hd for quite a while now, so it's time
to remove s->hd.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch can be applied to both qemu-xen and qemu and adds support
for empty write barriers to xen_disk.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An old version of this patch was applied to master, so this contains the
differences between v1 and v2.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently device hotplug removal code is tied to device removal via
ACPI. All pci devices that are removable via device_del() require the
guest to respond to the request. In some cases the guest may not
respond leaving the device still accessible to the guest. The management
layer doesn't currently have a reliable way to revoke access to host
resource in the presence of an uncooperative guest.
This patch implements a new monitor command, drive_del, which
provides an explicit command to revoke access to a host block device.
drive_del first quiesces the block device (qemu_aio_flush;
bdrv_flush() and bdrv_close()). This prevents further IO from being
submitted against the host device. Finally, drive_del cleans up
pointers between the drive object (host resource) and the device
object (guest resource).
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI read/write requests should not be re-issued before the current
fragment of I/O completes. There are asserts in scsi-disk.c that guard
this constraint but they trigger on SPARC Linux 2.4. It turns out that
the asserts are too early in the code path and don't allow for read
requests to terminate.
Only the read assert needs to be moved but move the write assert too for
consistency.
Reported-by: Nigel Horne <njh@bandsman.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename the members of target_ucontext so that they don't conflict
with possible host macros for ucontext members. This has already
been done for the other targets.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Errors should be logged using error_report() so they go to the
appropriate monitor.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As pointed out by avi the vgabios update is guest-visible and thus has
migration implications.
One change is that the vga has a valid pci rom bar now. We already have
a pci bus property to enable/disable the rom bar and we'll load the bios
via fw_cfg as fallback for the no-rom-bar case. So we just have to add
compat properties to handle this case.
A second change is that the magic bochs lfb @ 0xe0000000 is gone. When
live-migrating a guest from a older qemu version it might be using the
lfb though, so we have to keep it for the old machine types. The patch
enables the bochs lfb in case we don't have the pci rom bar enabled
(i.e. we are in 0.13+older compat mode).
This patch depends on these patches which add (and use) the pc-0.13
machine type:
http://patchwork.ozlabs.org/patch/70797/http://patchwork.ozlabs.org/patch/70798/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: avi@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While not explicitly stated in the spec, it was observed on real systems
that enabling loopback testing on the pcnet controller disables
reception of external frames. And some legacy software relies on it, so
provide this behavior.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current ioport callbacks are not type-safe, in that they accept an "opaque"
pointer as an argument whose type must match the argument to the registration
function; this is not checked by the compiler.
This patch adds an alternative that is type-safe. Instead of an opaque
argument, both registation and the callback use a new IOPort type. The
callback then uses container_of() to access its main structures.
Currently the old and new methods exist side by side; once the old way is gone,
we can also save a bunch of memory since the new method requires one pointer
per ioport instead of 6.
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VM state change notifications are invoked from vm_start()/vm_stop().
Trace these state changes so we can reason about the state of the VM
from trace output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch enables MSI-X for virtfs-9p-pci. It also adds a
compat property to pc-0.13 which turns it of there to stay
compatible to 0.13-stable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
fprintf_function adds format checking with GCC_FMT_ATTR.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Neither DECLARE_SPRINTF nor BAD_SPRINTF are needed for QEMU.
QEMU won't support systems with missing or bad declarations
for sprintf. The unused code was detected while looking for
functions with missing format checking. Instead of adding
GCC_FMT_ATTR, the unused code was removed.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have an OS which writes to port 0x400 when probing for special hardware.
This causes an exit of the VM. With SeaBIOS this port isn't used anyway.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-By: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
signrom.sh has multiple bugs:
- the last byte is considered when calculating the existing checksum, but not
when computing the correction
- apprently the 'expr' expression overflows and produces incorrect results with
larger roms
- if the checksum happened to be zero, we calculated the correction byte to be
256
Instead of rewriting this in half a line of python, this patch fixes the bugs.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
