There're plenty of places in migration/* that checks against either socket or
tls typed ioc for yank operations. Provide two helpers to hide all these
information.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210722175841.938739-4-peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Accessing from_dst_file is potentially racy in current code base like below:
if (s->from_dst_file)
do_something(s->from_dst_file);
Because from_dst_file can be reset right after the check in another
thread (rp_thread). One example is migrate_fd_cancel().
Use the same qemu_file_lock to protect it too, just like to_dst_file.
When it's safe to access without lock, comment it.
There's one special reference in migration_thread() that can be replaced by
the newly introduced rp_thread_created flag.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <20210722175841.938739-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with Peter's fixup
It's possible that the migration thread skip the join() of the rp_thread in
below race and crash on src right at finishing migration:
migration_thread rp_thread
---------------- ---------
migration_completion()
(before rp_thread quits)
from_dst_file=NULL
[thread got scheduled out]
s->rp_state.from_dst_file==NULL
(skip join() of rp_thread)
migrate_fd_cleanup()
qemu_fclose(s->to_dst_file)
yank_unregister_instance()
assert(yank_find_entry()) <------- crash
It could mostly happen with postcopy, but that shouldn't be required, e.g., I
think it could also trigger with MIGRATION_CAPABILITY_RETURN_PATH set.
It's suspected that above race could be the root cause of a recent (but rare)
migration-test break reported by either Dave or PMM:
https://lore.kernel.org/qemu-devel/YPamXAHwan%2FPPXLf@work-vm/
The issue is: from_dst_file is reset in the rp_thread, so if the thread reset
it to NULL fast enough then the migration thread will assume there's no
rp_thread at all.
This could potentially cause more severe issue (e.g. crash) after the yank code.
Fix it by using a boolean to keep "whether we've created rp_thread".
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210722175841.938739-2-peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
OpenBSD doesn't like :0 as an address, switch to using 127.0.0.1
in baddest; it's really testing the :0 port number that isn't allowed
on anything.
(The test doesn't currently run anyway because of the userfault
problem that Peter noticed, but this gets us closer to being able to
reenable it)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210719185217.122105-1-dgilbert@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- git ignore some file editor detritus
- add overview on device emulation terminology
- remove needless if leg in configure custom devices logic
- numerous gitdm/mailmap updates
- fix plugin_exit race for linux-user
- fix a few bugs in cache modelling plugin
- fix plugin calculation of physical address
- handle pure assembler/linker tcg tests outside of docker
- add tricore build to gitlab
- remove superfluous MacOSX task
- generalise the OpenBSI gitlab rules
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmD67ioACgkQ+9DbCVqe
KkTKcwf/UlEl2wlYrvymoJy7caasD/UrlNwpaK90zRTxuofJjG2bXX/58EGBlgxe
cjbX3841702HXAFDxzswmWX3yeXQVgNiXrEy5FapB7L3h/qC/BDVS4pz987TITNW
b4lw/d05bQVGavcdJXPnX0CdV8IK4hpieDkdh/LGj5+CSAC39jvyVGTYBpfLKl8D
cps5qcJcJuQjz4hatB1haZOV1WHLyw8KI0srfcEqkh3IImZFZ09frs3qqAxrYRqE
Y62d7SIN5TX1XgWuTaf1mmaMVmbNi9DTdCxWpGYr4ZBLhhzKeljQvKbF45ZGQ0z9
eBVBdxGJTX/WAKrimcbHxLo43pCo2Q==
=7vzj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.1-rc1-230721-1' into staging
Doc, metadata, plugin and testing updates for 6.1-rc1:
- git ignore some file editor detritus
- add overview on device emulation terminology
- remove needless if leg in configure custom devices logic
- numerous gitdm/mailmap updates
- fix plugin_exit race for linux-user
- fix a few bugs in cache modelling plugin
- fix plugin calculation of physical address
- handle pure assembler/linker tcg tests outside of docker
- add tricore build to gitlab
- remove superfluous MacOSX task
- generalise the OpenBSI gitlab rules
# gpg: Signature made Fri 23 Jul 2021 17:28:26 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.1-rc1-230721-1: (28 commits)
gitlab-ci: Extract OpenSBI job rules to reusable section
gitlab-ci: Remove the second superfluous macos task
gitlab: enable a very minimal build with the tricore container
tests/tcg/configure.sh: add handling for assembler only builds
plugins: Fix physical address calculation for IO regions
plugins/cache: Fixed "function decl. is not a prototype" warnings
plugins/cache: limited the scope of a mutex lock
plugins/cache: Fixed a bug with destroying FIFO metadata
tcg/plugins: implement a qemu_plugin_user_exit helper
contrib/gitdm: add more individual contributor entries.
contrib/gitdm: add a new interns group-map for GSoC/Outreachy work
contrib/gitdm: add an explicit academic entry for BU
contrib/gitdm: add group-map for Netflix
contrib/gitdm: add domain-map for NVIDIA
contrib/gitdm: add domain-map for Crudebyte
contrib/gitdm: un-ironically add a mapping for LWN
contrib/gitdm: add domain-map/group-map for Wind River
contrib/gitdm: add domain-map for Eldorado
contrib/gitdm: add domain-map/group-map mappings for Samsung
gitdm.config: sort the corporate GroupMap entries
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the NVMe block driver was introduced (see commit bdd6a90a9e,
January 2018), Linux VFIO_IOMMU_MAP_DMA ioctl was only returning
-ENOMEM in case of error. The driver was correctly handling the
error path to recycle its volatile IOVA mappings.
To fix CVE-2019-3882, Linux commit 492855939bdb ("vfio/type1: Limit
DMA mappings per container", April 2019) added the -ENOSPC error to
signal the user exhausted the DMA mappings available for a container.
The block driver started to mis-behave:
qemu-system-x86_64: VFIO_MAP_DMA failed: No space left on device
(qemu)
(qemu) info status
VM status: paused (io-error)
(qemu) c
VFIO_MAP_DMA failed: No space left on device
(qemu) c
VFIO_MAP_DMA failed: No space left on device
(The VM is not resumable from here, hence stuck.)
Fix by handling the new -ENOSPC error (when DMA mappings are
exhausted) without any distinction to the current -ENOMEM error,
so we don't change the behavior on old kernels where the CVE-2019-3882
fix is not present.
An easy way to reproduce this bug is to restrict the DMA mapping
limit (65535 by default) when loading the VFIO IOMMU module:
# modprobe vfio_iommu_type1 dma_entry_limit=666
Cc: qemu-stable@nongnu.org
Cc: Fam Zheng <fam@euphon.net>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Michal Prívozník <mprivozn@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210723195843.1032825-1-philmd@redhat.com
Fixes: bdd6a90a9e ("block: Add VFIO based NVMe driver")
Buglink: https://bugs.launchpad.net/qemu/+bug/1863333
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/65
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since commit 8eb13bbbac ("ui/gtk: vte: fix sending multiple
characeters") it's very easy to lock up QEMU with the GTK ui.
If you configure a guest with a serial device and the guest
doesn't listen on this device, QEMU will lock up after
entering two characters in the serial console. That's because
current code uses a busy loop for the chardev write retries
and the busy loop doesn't terminate in this case.
To fix this problem add a fifo to the VTE consoles and use the
chr_accept_input() callback function to write the remaining
characters in the queue to the chardev.
The fifo has a size of 4096 bytes, so one can copy and paste
a fairly large URL or file path.
Fixes: 8eb13bbbac ("ui/gtk: vte: fix sending multiple characeters")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210725165039.5242-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ui/egl-headless is only built when CONFIG_OPENGL is defined because it
depends on CONFIG_OPENGL without condition. Remove a redundant
conditonal in ui/egl-headless.c
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210714055646.85952-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some code in ui/spice used CONFIG_OPENGL for OpenGL conditionals, but
SPICE also depends on CONFIG_GBM and SPICE server whose version is
0.13.1 or later for OpenGL. Always use HAVE_SPICE_GL, which defines the
precise condition.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210714055735.86050-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To handle relative mouse input the event handler needs to move the mouse
away from the screen edges. Failing to do so results in the mouse
getting stuck at invisible walls. However the current implementation for
this is broken on hosts with multiple monitors.
With multiple monitors the mouse can be located outside of the current
monitor which is not handled by the current code. Also the monitor
itself might be located at coordinates different from (0, 0).
Signed-off-by: Dennis Wölfing <denniswoelfing@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210720143940.291413-1-denniswoelfing@gmx.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All jobs depending on 'docker-opensbi' job must use at most all
the rules that triggers it. The simplest way to ensure that
is to always use the same rules. Extract all the rules to a
reusable section, and include this section (with the 'extends'
keyword) in both 'docker-opensbi' and 'build-opensbi' jobs.
The problem was introduced in commit c6fc0fc1a7 ("gitlab-ci.yml:
Add jobs to build OpenSBI firmware binaries"), but was revealed in
commit 91e9c47e50 ("docker: OpenSBI build job depends on OpenSBI
container").
This fix is similar to the one used with the EDK2 firmware job in
commit ac0595cf6b ("gitlab-ci: Extract EDK2 job rules to reusable
section").
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210720164829.3949558-1-philmd@redhat.com>
Message-Id: <20210720232703.10650-30-alex.bennee@linaro.org>
While there might have been bigger differnces between the -base and
the -xcode images in the beginning, they almost vanished in the
current builds, e.g. when comparing the output of the "configure"
step after cleaning up the differences due to temporary path names,
I only get:
$ diff -u /tmp/base.txt /tmp/xcode.txt
--- /tmp/base.txt 2021-07-16 09:16:24.211427940 +0200
+++ /tmp/xcode.txt 2021-07-16 09:16:43.029684274 +0200
@@ -19,14 +19,14 @@
Build type: native build
Project name: qemu
Project version: 6.0.50
-C compiler for the host machine: cc (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.29)")
+C compiler for the host machine: cc (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.28)")
C linker for the host machine: cc ld64 609.8
Host machine cpu family: x86_64
Host machine cpu: x86_64
Program sh found: YES (/bin/sh)
Program python3 found: YES (/usr/local/opt/python@3.9/bin/python3.9)
Program bzip2 found: YES (/usr/bin/bzip2)
-C++ compiler for the host machine: c++ (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.29)")
+C++ compiler for the host machine: c++ (clang 12.0.0 "Apple clang version 12.0.0 (clang-1200.0.32.28)")
C++ linker for the host machine: c++ ld64 609.8
Objective-C compiler for the host machine: clang (clang 12.0.0)
Objective-C linker for the host machine: clang ld64 609.8
Since we're not using Xcode itself at all, it seems like it does not
make much sense anymore to waste compute cycles with two images here.
Thus let's delete the -xcode job now.
[AJB: fix up commit formatting which trips up b4]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210719073051.1559348-1-thuth@redhat.com>
Message-Id: <20210720232703.10650-29-alex.bennee@linaro.org>
Rather than base of the shared Debian 10 container which would require
us to bring in even more dependencies just bring in what is needed for
building tricore-softmmu in GitLab. We don't even remove the container
from the DOCKER_PARTIAL_IMAGES lest we cause more confusion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210720232703.10650-28-alex.bennee@linaro.org>
Up until this point we only handled local compilers or assumed we had
everything in the container. This falls down when we are building QEMU
inside the container.
This special handling only affects tricore for now but I put it in a
case just in case we add any other "special" targets. Setting
CROSS_CC_GUEST is a bit of a hack just to ensure the test runs as we
gate on a detected compiler even though the Makefile won't actually
use it. It also means we display something sane in the configure
output.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210720232703.10650-27-alex.bennee@linaro.org>
The address calculation for IO regions introduced by
commit 787148bf92
Author: Aaron Lindsay <aaron@os.amperecomputing.com>
plugins: Expose physical addresses instead of device offsets
is not always accurate. Use the more correct
MemoryRegionSection.offset_within_address_space.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210720195735.3934473-1-aaron@os.amperecomputing.com>
Message-Id: <20210720232703.10650-25-alex.bennee@linaro.org>
It's not necessary to lock the address translation portion of the
vcpu_mem_access callback.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210714172151.8494-3-ma.mandourr@gmail.com>
Message-Id: <20210720232703.10650-23-alex.bennee@linaro.org>
This manifests itself when associativity degree is greater than the
number of sets and FIFO is used, otherwise it's also a memory leak
whenever FIFO was used.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210714172151.8494-2-ma.mandourr@gmail.com>
Message-Id: <20210720232703.10650-22-alex.bennee@linaro.org>
In user-mode emulation there is a small race between preexit_cleanup
and exit_group() which means we may end up calling instrumented
instructions before the kernel reaps child threads. To solve this we
implement a new helper which ensures the callbacks are flushed along
with any translations before we let the host do it's a thing.
While we are at it make the documentation of
qemu_plugin_register_atexit_cb clearer as to what the user can expect.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Acked-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210720232703.10650-21-alex.bennee@linaro.org>
It makes sense to put our various interns in a group so we can see the
overall impact of GSoC and Outreachy on the project.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Cc: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Cc: César Belley <cesar.belley@lse.epita.fr>
Message-Id: <20210720232703.10650-19-alex.bennee@linaro.org>
For some reason Alexander's contributions were not getting grouped
from the plain "edu" mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210720232703.10650-18-alex.bennee@linaro.org>
Warner confirmed he works for Netflix on IRC.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210720232703.10650-17-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20210720232703.10650-15-alex.bennee@linaro.org>
I think this mainly comes from kernel-doc stuff imported into the QEMU
tree.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Message-Id: <20210720232703.10650-14-alex.bennee@linaro.org>
As per discussion at:
http://patchwork.ozlabs.org/project/qemu-devel/patch/20201004180443.2035359-19-f4bug@amsat.org/
I've added Bin's personal email as an individual contributor.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Bin Meng <bin.meng@windriver.com>
Cc: Ruimei Yan <ruimei.yan@windriver.com>
Cc: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Message-Id: <20210720232703.10650-13-alex.bennee@linaro.org>
Luis acked on IRC:
#qemu@znc-oftc_2021-07-13.txt:[15:00:02] <lffpires> stsquad: "eldorado.org.br Eldorado" is fine
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <20210720232703.10650-12-alex.bennee@linaro.org>
Minwoo's work from their personal address are treated as personal
contributions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Message-Id: <20210720232703.10650-11-alex.bennee@linaro.org>
Lets try and keep them that way.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210720232703.10650-10-alex.bennee@linaro.org>
Fixes: 49a6f3bffb ("target/arm: Correct the encoding of MDCCSR_EL0 and DBGDSCRint")
Fixes: 5a07192a04 ("target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Nick Hudson <hnick@vmware.com>
Cc: Marek Dolata <mkdolata@us.ibm.com>
Message-Id: <20210720232703.10650-7-alex.bennee@linaro.org>
It was pointed out in review of the previous patch that the if leg
isn't needed as the for loop will not enter on an empty $device_archs.
Fixes: d1d5e9eefd ("configure: allow the selection of alternate config in the build")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210720232703.10650-5-alex.bennee@linaro.org>
While we do mention some of this stuff in the various daemons and
manuals the subtleties of the socket and memory sharing are sometimes
missed. This document attempts to give some background on vhost-user
daemons in general terms.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210720232703.10650-4-alex.bennee@linaro.org>
While we are at it add a brief preamble that explains some of the
common concepts in QEMU's device emulation which will hopefully lead
to less confusing about our dizzying command line options.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210720232703.10650-3-alex.bennee@linaro.org>
Alias targets have a different name than the alias property itself
(e.g. a machine's pflash0 might be an alias of a property named 'drive').
When the target's getter or setter invokes the visitor, it will use
a different name than what the caller expects, and the visitor will
not be able to find it (or will consume erroneously).
The solution is for alias getters and setters to wrap the incoming
visitor, and forward the sole field that the target is expecting while
renaming it appropriately.
This bug has been there forever, but it was exposed after -M parsing
switched from QemuOptions and StringInputVisitor to keyval and
QObjectInputVisitor. Before, the visitor ignored the name. Now, it
checks "drive" against what was passed on the command line and finds
that no such property exists.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/484
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new adaptor visitor takes a single field of the adaptee, and exposes it
with a different name.
This will be used for QOM alias properties. Alias targets can of course
have a different name than the alias property itself (e.g. a machine's
pflash0 might be an alias of a property named 'drive'). When the target's
getter or setter invokes the visitor, it will use a different name than
what the caller expects, and the visitor will not be able to find it
(or will consume erroneously).
The solution is for alias getters and setters to wrap the incoming
visitor, and forward the sole field that the target is expecting while
renaming it appropriately.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GitLab will happily publish pages generated by the latest CI pipeline
from any branch:
https://docs.gitlab.com/ee/user/project/pages/introduction.html
"Remember that GitLab Pages are by default branch/tag agnostic
and their deployment relies solely on what you specify in
.gitlab-ci.yml. You can limit the pages job with the only
parameter, whenever a new commit is pushed to a branch used
specifically for your pages."
The current "pages" job is not limited, so it is happily publishing
docs content from any branch/tag in qemu.git that gets pushed to.
This means we're potentially publishing from the "staging" branch
or worse from outdated "stable-NNN" branches
This change restricts it to only publish from the default branch
in the main repository. For contributor forks, however, we allow
it to publish from any branch, since users will have arbitrarily
named topic branches in flight at any time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210723113051.2792799-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both files logically belong to "Memory API" and are not yet listed
anywhere else explicitly. Let's add them to "Memory API".
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210723100532.27353-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter and myself volunteered to help out co-maintaining "Memory API"
with Paolo, so let's update the MAINTAINERS file.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210723100532.27353-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Edurdo asked me to take over co-maintaining "Host Memory Backends" with
Igor, as Eduardo has plenty of other things to look after.
Thanks a lot Eduardo for your excellent work in the past!
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210723100532.27353-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some cpu properties have to be set only for cpu models in builtin_x86_defs,
registered with x86_register_cpu_model_type, and not for
cpu models "base", "max", and the subclass "host".
These properties are the ones set by function x86_cpu_apply_props,
(also including kvm_default_props, tcg_default_props),
and the "vendor" property for the KVM and HVF accelerators.
After recent refactoring of cpu, which also affected these properties,
they were instead set unconditionally for all x86 cpus.
This has been detected as a bug with Nested on AMD with cpu "host",
as svm was not turned on by default, due to the wrongful setting of
kvm_default_props via x86_cpu_apply_props, which set svm to "off".
Rectify the bug introduced in commit "i386: split cpu accelerators"
and document the functions that are builtin_x86_defs-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c,"...)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/477
Message-Id: <20210723112921.12637-1-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All MBZ in CR3 must be zero (APM2 15.5)
Added checks in both helper_vmrun and helper_write_crN.
When EFER.LMA is zero the upper 32 bits needs to be zeroed.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210723112740.45962-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
modinfo runs the preprocessor and therefore needs all generated input files
to be there. The "depends" clause does not work in Meson 0.55.3, so for
now use "input".
Part #2: Update the rule for target-specific modules too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210723120156.1183920-1-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
