The actual imx_eth_enable_rx() function is buggy.
It updates s->regs[ENET_RDAR] after calling qemu_flush_queued_packets().
qemu_flush_queued_packets() is going to call imx_XXX_receive() which itself
is going to call imx_eth_enable_rx().
By updating s->regs[ENET_RDAR] after calling qemu_flush_queued_packets()
we end up updating the register with an outdated value which might
lead to disabling the receive function in the i.MX FEC/ENET device.
This patch change the place where the register update is done so that the
register value stays up to date and the receive function can keep
running.
Reported-by: Fyleo <fyleo45@gmail.com>
Tested-by: Fyleo <fyleo45@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20180113113445.2705-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some i.MX SoCs (e.g. i.MX7) have FEC registers going as far as offset
0x614, so to avoid getting aborts when accessing those on QEMU, extend
the register file to cover FSL_IMX25_FEC_SIZE(16K) of address space
instead of just 1K.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use 'frame_size' instead of 'len' when calling qemu_send_packet(),
failing to do so results in malformed packets send in case when that
packed is fragmented into multiple DMA transactions.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
More recent version of the IP block support more than one Tx DMA ring,
so add the code implementing that feature.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Needed to support latest Linux kernel driver which relies on that
functionality.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Frame truncation length, TRUNC_FL, is determined by the contents of
ENET_FTRL register, so convert the code to use it instead of a
hardcoded constant.
To avoid the case where TRUNC_FL is greater that ENET_MAX_FRAME_SIZE,
increase the value of the latter to its theoretical maximum of 16K.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make Tx frame assembly buffer to be a paort of IMXFECState structure
to avoid a concern about having large data buffer on the stack.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In current implementation, packet queue flushing logic seem to suffer
from a deadlock like scenario if a packet is received by the interface
before before Rx ring is initialized by Guest's driver. Consider the
following sequence of events:
1. A QEMU instance is started against a TAP device on Linux
host, running Linux guest, e. g., something to the effect
of:
qemu-system-arm \
-net nic,model=imx.fec,netdev=lan0 \
netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \
... rest of the arguments ...
2. Once QEMU starts, but before guest reaches the point where
FEC deriver is done initializing the HW, Guest, via TAP
interface, receives a number of multicast MDNS packets from
Host (not necessarily true for every OS, but it happens at
least on Fedora 25)
3. Recieving a packet in such a state results in
imx_eth_can_receive() returning '0', which in turn causes
tap_send() to disable corresponding event (tap.c:203)
4. Once Guest's driver reaches the point where it is ready to
recieve packets it prepares Rx ring descriptors and writes
ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that
more descriptors are ready. And at this points emulation
layer does this:
s->regs[index] = ENET_RDAR_RDAR;
imx_eth_enable_rx(s);
which, combined with:
if (!s->regs[ENET_RDAR]) {
qemu_flush_queued_packets(qemu_get_queue(s->nic));
}
results in Rx queue never being flushed and corresponding
I/O event beign disabled.
To prevent the problem, change the code to always flush packet queue
when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor imx_eth_enable_rx() to have more meaningfull variable name
than 'tmp' and to reduce number of logical negations done.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Binding to a particular netdev doesn't seem to belong to this layer
and should probably be done as a part of board or SoC specific code.
Convert all of the users of this IP block to use
qdev_set_nic_properties() instead.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
i.MX Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set an upper limit to number of buffer descriptors.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This uses the wrong frame size for packets composed of multiple
descriptors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union. The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.
While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place. Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two. Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.
Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The ENET device (present in i.MX6) is "derived" from FEC and backward
compatible with it.
This patch adds the necessary support of the added feature in the ENET
device to allow Linux to use it (on supported processors).
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is to prepare for the ENET Gb device of the i.MX6.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to the FEC chapter of i.MX25 reference manual
RX adn TX descriptors are reseted when the FEC device is disabled through ECR.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to the FEC chapter of i.MX25 reference manual ECR register is
initialized at 0xf0000000 at reset time.
We fix the value.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to the FEC chapter of i.MX25 reference manual
When writing to MMFR register, the MDIO device and adress are selected by
bit 27 to 23 and bit 22 to 18 respectively. This is a total of 10 bits
that need to be used by the Phy chip/address decoding function.
This patch fixes the number of bits used from 9 to 10.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to the FEC chapter of i.MX25 reference manual
When writing the MMFR register, bit 29 and 28 select the requested operation.
* 10 means read operation with valid MII mgmt frame
* 11 means read operation with non compliant MII mgmt frame
* 01 means write operation with valid MII mgmt frame
* 00 means write operation with non compliant MII mgmt frame
So while bit 28 does change beween read/write for valid MII mgmt frame, the
mening is inverted for non compliant MII mgmt frame.
Bit 29 on the other hand means read/write whatever the type of mgmt frame
involved.
So this patch change the operation selection from bit 28 to bit 29 as it is
more generic.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
The goal is to have debug code always compiled during build.
We standardize all debug output on the following format:
[QOM_TYPE_NAME]reporting_function: debug message
The qemu_log_mask() output is following the same format as the
above debug.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 57e565982db94fb433c32dfa17608888464d21de.1445781957.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is based on mcf_fec.c FEC implementation for Coldfire
* A generic PHY was added (borrowwed from LAN9118)
* The buffer management is also modified as buffers are
slightly different between Coldfire and i.MX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
