The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The function gen_load_trap_state_at_tl() is only used in the softmmu
configs; wrap it in #ifndef CONFIG_USER_ONLY to avoid clang compiler
warnings in linux-user builds.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The functions gen_op_addi_cc() and gen_op_subi_cc() are unused; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h. This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The LEON3 processor has support for the CASA instruction which is
normally only available for SPARC V9 processors. Binutils 2.24
and GCC 4.9 will support this instruction for LEON3. GCC uses it to
generate C11 atomic operations.
The CAS synthetic instruction uses an ASI of 0x80. If TARGET_SPARC64 is
not defined use a supervisor data load/store for an ASI of 0x80 in
helper_ld_asi()/helper_st_asi(). The supervisor data load/store was
choosen according to the LEON3 documentation.
The ASI 0x80 is defined in the SPARC V9 manual, Table 12—Address Space
Identifiers (ASIs). Here we have: 0x80, ASI_PRIMARY, Unrestricted
access, Primary address space.
Tested with the following program:
#include <assert.h>
#include <stdatomic.h>
void test(void)
{
atomic_int a;
int e;
_Bool b;
atomic_store(&a, 1);
e = 1;
b = atomic_compare_exchange_strong(&a, &e, 2);
assert(b);
assert(atomic_load(&a) == 2);
atomic_store(&a, 3);
e = 4;
b = atomic_compare_exchange_strong(&a, &e, 5);
assert(!b);
assert(atomic_load(&a) == 3);
}
Tested also on a NGMP board with a LEON4 processor.
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Synchronize the program counter before the power down helper call
otherwise interrupts will return to the wrong context.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Also use bool type while at it.
Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
There is some read-after-write error within the OP=2 insns which
prevents setting cpu_dst to the real output register. Until this
is found and fixed, always write to a temporary first.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Like the MOVr instruction, the FMOVr instruction has the condition
encoded between bits 10 and 12.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Subroutines do their own local temporary management.
Within disas_sparc_insn we limit the existance of the variable
to OP=2 insns, and delay initialization as late as is reasonable
for the specific XOP.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
And initialize it such that it (may) write directly to rd.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use cpu_tmp0 for other stuff, like Write Priv Register.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The use of "tl" functions and a tmp64 is logically incompatible.
Use cpu_tmp0 instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In all cases we don't have write-before-read problems.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove the last uses of cpu_tmp32. Unify the code between sparc64
and sparc32 by using the proper "tl" functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We don't need another temporary here. Load directly into the
register we want to set.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that get_temp_tl is used for get_src[12], we don't need to
pre-allocate these temporaries.
Fallout from this is moving some assignments around cas/casx to
avoid uninitialized variable warnings.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All users of gen_movl_{reg_TN,TN_reg} are removed. At the same time,
make cpu_val a local variable for load/store disassembly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Push the DisasContext down so that we can use gen_load/store_gpr
in sode gen_ldda_asi, gen_stda_ast, gen_cas_asi, gen_casx_asi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This means we can avoid the incoming temporary, though the cleanup
of the existing temporaries is not performed in this patch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Only handle the easy cases directly within disas_sparc_insn.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Infrastructure to be used to clean up handling of temporaries.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid speculatively computing flags before every potentially trapping
operation and instead do the flags computation when a trap actually
occurs. This gives approximately 30% speedup in emulation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
