No need for this obfuscated ifdef'ry, KISS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-3-f4bug@amsat.org>
Introduce the 'mips_tcg' source set to collect TCG specific files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-2-f4bug@amsat.org>
Trace all accesses to Internal Space Decode (ISD) registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210309142630.728014-6-f4bug@amsat.org>
We want to trace all register accesses. First rename the current
gt64120_read / gt64120_write events with '_intreg' suffix, as they
are restricted to interrupt registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210309142630.728014-5-f4bug@amsat.org>
Fix the following typos:
- GT_PCI1_CFGDATA is not a timer register but a PCI one,
- zero-padding flag is out of the format
Fixes: 641ca2bfcd ("hw/mips/gt64xxx_pci: Use qemu_log_mask() instead of debug printf()")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210309142630.728014-4-f4bug@amsat.org>
The ISD MemoryRegion is implemented for 32-bit accesses.
Simplify it by setting the MemoryRegionOps::impl min/max
access size fields.
Since the region is registered with a size of 0x1000 bytes,
we can remove the hwaddr mask.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210309142630.728014-3-f4bug@amsat.org>
The ISD I/O region belongs to the TYPE_GT64120_PCI_HOST_BRIDGE,
so initialize it before it is realized, not after.
Rename the region as 'gt64120-isd' so it is clearer to realize
it belongs to the GT64120 in the memory tree view.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210309142630.728014-2-f4bug@amsat.org>
Previously, guest_loaddr was not taken into account when returning an
address from pgb_find_hole when /proc/self/maps was unavailable which
caused an improper guest_base address to be calculated.
This could cause a SIGSEGV later in load_elf_image -> target_mmap for
ET_EXEC type images since the mmap MAP_FIXED flag is specified which
could clobber existing mappings at the address returnd by g2h().
mmap(0xd87000, 16846912, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE|0x100000, -1, 0) = 0xd87000
munmap(0xd87000, 16846912) = 0
write(2, "Locating guest address space @ 0"..., 40Locating guest address space @ 0xd87000) = 40
mmap(0x1187000, 16850944, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x1187000
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_ACCERR, si_addr=0x2188310} ---
+++ killed by SIGSEGV +++
Now, pgd_find_hole accounts for guest_loaddr in this scenario.
Fixes: ad592e37df ("linux-user: provide fallback pgd_find_hole for bare chroots")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210131061948.15990-1-vfazio@xes-inc.com>
[lv: updated it to check if ret == -1]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, pgd_find_hole_fallback assumed that if the build host's libc
had MAP_FIXED_NOREPLACE defined that the address returned by mmap would
match the requested address. This is not a safe assumption for Linux
kernels prior to 4.17
Now, we always compare mmap's resultant address with the requested
address and no longer short-circuit based on MAP_FIXED_NOREPLACE.
Fixes: 2667e069e7 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210131061930.14554-1-vfazio@xes-inc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously, if the build host's libc did not define MAP_FIXED_NOREPLACE
or if the running kernel didn't support that flag, it was possible for
pgd_find_hole_fallback to munmap an incorrect address which could lead to
SIGSEGV if the range happened to overlap with the mapped address of the
QEMU binary.
mmap(0x1000, 22261224, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f889d331000
munmap(0x1000, 22261224) = 0
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x84b817} ---
++ killed by SIGSEGV +++
Now, always munmap the address returned by mmap.
Fixes: 2667e069e7 ("linux-user: don't use MAP_FIXED in pgd_find_hole_fallback")
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210131061849.12615-1-vfazio@xes-inc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add --preserve-argv0 in qemu-binfmt-conf.sh to configure the preserve-argv0
flag.
This patch allows to use new flag in AT_FLAGS to detect if
preserve-argv0 is configured for this interpreter:
argv[0] (the full pathname provided by binfmt-misc) is removed and
replaced by argv[1] (the original argv[0] provided by binfmt-misc when
'P'/preserve-arg[0] is set)
For instance with this patch and kernel support for AT_FLAGS:
$ sudo chroot m68k-chroot sh -c 'echo $0'
sh
without this patch:
$ sudo chroot m68k-chroot sh -c 'echo $0'
/usr/bin/sh
The new flag is available in kernel (v5.12) since:
2347961b11d4 ("binfmt_misc: pass binfmt_misc flags to the interpreter")
This can be tested with something like:
# cp ..../qemu-ppc /chroot/powerpc/jessie
# qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \
--persistent no --preserve-argv0 yes
# systemctl restart systemd-binfmt.service
# cat /proc/sys/fs/binfmt_misc/qemu-ppc
enabled
interpreter //qemu-ppc
flags: POC
offset 0
magic 7f454c4601020100000000000000000000020014
mask ffffffffffffff00fffffffffffffffffffeffff
# chroot /chroot/powerpc/jessie sh -c 'echo $0'
sh
# qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \
--persistent no --preserve-argv0 no
# systemctl restart systemd-binfmt.service
# cat /proc/sys/fs/binfmt_misc/qemu-ppc
enabled
interpreter //qemu-ppc
flags: OC
offset 0
magic 7f454c4601020100000000000000000000020014
mask ffffffffffffff00fffffffffffffffffffeffff
# chroot /chroot/powerpc/jessie sh -c 'echo $0'
/bin/sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210222105004.1642234-1-laurent@vivier.eu>
The guest binary and libraries are not always map with the
executable bit in the host process. The guest may read a
/proc/self/maps with no executable address range. The
perm fields should be based on the guest permission inside
Qemu.
Signed-off-by: Nicolas Surbayrole <nsurbayrole@quarkslab.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210308091959.986540-1-nsurbayrole@quarkslab.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add it in a prominent place: Right after figuring out what QEMU is,
users may wish to know how to use it more than they want to know how to
build their own version of it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20201104193032.1319248-1-jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The status of the gitlab-CI files is currently somewhat confusing, and
it is often not quite clear whether a patch should go via my tree or
via the testing tree of Alex. That situation has grown historically...
Initially, I was the only one using the gitlab-CI, just for my private
repository there. But in the course of time, the gitlab-CI switched to
use the containers from tests/docker/ (which is not part of the gitlab-CI
section in the MAINTAINERS file), and QEMU now even switched to gitlab.com
completely for the repository and will soon use it as its gating CI, too,
so it makes way more sense if the gitlab-ci.yml files belong to the people
who are owning the qemu-project on gitlab.com and take care of the gitlab
CI there. Thus let's merge the gitlab-ci section into the common "test and
build automation" section.
And while we're at it, I'm also removing the line with Fam there for now,
since he was hardly active during the last years in this area anymore.
If he ever gets more time for this part again in the future, we surely
can add the line back again. I'm also removing the Patchew URL from this
section now since Patchew's files are not tracked in the main QEMU repo
and it is also not maintained by Alex, Philippe and myself.
The maintainers of Patchew are still listed more accurately in the wiki on
https://wiki.qemu.org/AdminContacts & https://wiki.qemu.org/Testing/CI/Patchew
instead.
Now to avoid that Alex is listed here in this section alone, Philippe and
I agreed to help as backup maintainers here, too. And Willian volunteered
to be an additional reviewer.
Message-Id: <20210309112356.737266-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"make check-speed" has been broken since the removal of ninja2make
last October. It was just a backwards-compatibility alias for
"make bench-speed", which in turn is in principle a subset of
"make bench". Advertise the latter and drop "make check-speed"
completely since no one has noticed.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210310164612.285362-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Both, the build-crypto-old and the check-crypto-old jobs finish reasonably
fast, and the build artifacts are only used for the single corresponding
check jobs, so there is no reason for doing the check step in a separate
job here. Thus let's stop wasting artifacts space and job scheduler over-
head by simply merging the test step into the build jobs.
Message-Id: <20210311142211.1547864-5-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Our gitlab-ci got quite slow in the past weeks, due to the immense amount
of jobs that we have, so we should try to reduce the number of jobs.
Since we already have a job that builds without TCG, we can merge
one of the "build-coroutine" jobs with it to get rid of at least one
job.
Message-Id: <20210311142211.1547864-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's make sure that all jobs have proper "needs:" statements so that
they can start as soon as possible, without having to wait for the
previous pipeline stage to finish.
Message-Id: <20210311142211.1547864-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "build-tools-and-docs-debian" job had been added in between
the "check-system-debian" and the "accepance-system-debian" jobs
and thus separates the jobs that belong together. Move it away,
to the end of the file, next to the "pages" job that depends on it.
And while we're at it, also add a proper "needs:" line to the
job so that it can be started as soon as possible instead of always
waiting for the previous stage to finish.
Message-Id: <20210311142211.1547864-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make it clear that these files are related to benchmarks by moving
them into a new folder called "bench".
Message-Id: <20210312092238.79509-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The main tests directory still looks very crowded, and it's not
clear which files are part of a unit tests and which belong to
a different test subsystem. Let's clean up the mess and move the
unit tests to a separate directory.
Message-Id: <20210310063314.1049838-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds testing of PWM fan RPMs in the existing npcm7xx pwm
test. It tests whether the MFT module can measure correct fan values
for a PWM fan in NPCM7XX boards.
Reviewed-by: Doug Evans <dje@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210311180855.149764-6-wuhaotsh@google.com
[PMM: fixed format strings for printing uint64_t]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan
splitter corresponds to 1 PWM output and can connect to multiple fan
inputs (MFT devices).
In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes
these splitters and connect them to their corresponding modules
according their specific device trees.
Reviewed-by: Doug Evans <dje@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210311180855.149764-5-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements Multi Function Timer (MFT) module for NPCM7XX.
This module is mainly used to configure PWM fans. It has just enough
functionality to make the PWM fan kernel module work.
The module takes two input, the max_rpm of a fan (modifiable via QMP)
and duty cycle (a GPIO from the PWM module.) The actual measured RPM
is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is
measured as a counter compared to a prescaled input clock. The kernel
driver reads this counter and report to user space.
Refs:
https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c
Reviewed-by: Doug Evans <dje@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210311180855.149764-3-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds GPIOs in NPCM7xx PWM module for its duty values.
The purpose of this is to connect it to the MFT module to provide
an input for measuring a PWM fan's RPM. Each PWM module has
NPCM7XX_PWM_PER_MODULE of GPIOs, each one corresponds to
one PWM instance and can connect to multiple fan instances in MFT.
Reviewed-by: Doug Evans <dje@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210311180855.149764-2-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the
upper bound of the IPA size. If that bound is lower than the highest
possible GPA for the machine, then QEMU will error out. However, the
IPA is set to 40 when the highest GPA is less than or equal to 40,
even when KVM may support an IPA limit as low as 32. This means KVM
may fail the VM creation unnecessarily. Additionally, 40 is selected
with the value 0, which means use the default, and that gets around
a check in some versions of KVM, causing a difficult to debug fail.
Always use the IPA size that corresponds to the highest possible GPA,
unless it's lower than 32, in which case use 32. Also, we must still
use 0 when KVM only supports the legacy fixed 40 bit IPA.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Message-id: 20210310135218.255205-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prior to commit f2ce39b4f0 a MachineClass kvm_type method
only needed to be registered to ensure it would be executed.
With commit f2ce39b4f0 a kvm-type machine property must also
be specified. hw/arm/virt relies on the kvm_type method to pass
its selected IPA limit to KVM, but this is not exposed as a
machine property. Restore the previous functionality of invoking
kvm_type when it's present.
Fixes: f2ce39b4f0 ("vl: make qemu_get_machine_opts static")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210310135218.255205-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the SSECounter link is absent, we set an error message
in sse_timer_realize() but forgot to propagate this error.
Add the missing 'return'.
Fixes: CID 1450755 (Null pointer dereferences)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210312001845.1562670-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously the ARMBIAN_ARTIFACTS_CACHED pre-condition was added to allow running
tests that have already existing armbian.com artifacts stored in the local avocado cache,
but do not have working URLs to download a fresh copy.
At this time of writing the URLs for artifacts on the armbian.com server are updated and working.
Any future broken URLs will result in a skipped acceptance test, for example:
(1/5) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
CANCEL: Missing asset https://apt.armbian.com/pool/main/l/linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb (0.53 s)
This commits removes the ARMBIAN_ARTIFACTS_CACHED pre-condition such that
the acceptance tests for the orangepi-pc and cubieboard machines can run.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-6-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux kernel 4.20.7 binary for sunxi has been removed from apt.armbian.com:
$ ARMBIAN_ARTIFACTS_CACHED=yes AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
Fetching asset from tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi
...
(1/6) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi:
CANCEL: Missing asset https://apt.armbian.com/pool/main/l/linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb (0.55 s)
This commit updates the sunxi kernel to 5.10.16 for the acceptance
tests of the orangepi-pc and cubieboard machines.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-5-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the download URL of the Armbian 20.08 Bionic image for
test_arm_orangepi_bionic_20_08 of the orangepi-pc machine.
The archive.armbian.com URL contains more images and should keep stable
for a longer period of time than dl.armbian.com.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-4-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The image for Armbian 19.11.3 bionic has been removed from the armbian server.
Without the image as input the test arm_orangepi_bionic_19_11 cannot run.
This commit removes the test completely and merges the code of the generic function
do_test_arm_orangepi_uboot_armbian back with the 20.08 test.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210310195820.21950-3-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the emulated EMAC for sun8i always traverses the transmit queue
from the head when transferring packets. It searches for a list of consecutive
descriptors whichs are flagged as ready for processing and transmits their payloads
accordingly. The controller stops processing once it finds a descriptor that is not
marked ready.
While the above behaviour works in most situations, it is not the same as the actual
EMAC in hardware. Actual hardware uses the TX_CUR_DESC register value to keep track
of the last position in the transmit queue and continues processing from that position
when software triggers the start of DMA processing. The currently emulated behaviour can
lead to packet loss on transmit when software fills the transmit queue with ready
descriptors that overlap the tail of the circular list.
This commit modifies the emulated EMAC for sun8i such that it processes
the transmit queue using the TX_CUR_DESC register in the same way as hardware.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210310195820.21950-2-nieklinnenbank@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the reduction operations, we intentionally increase maxsz to
the next power of 2, so as to fill out the reduction tree correctly.
Since e2e7168a21, oprsz must equal maxsz, with exceptions for small
vectors, so this triggers an assertion for vector sizes > 32 that are
not themselves a power of 2.
Pass the power-of-two value in the simd_data field instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since b64ee454a4, all predicate operations should be
using these field macros for predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrote too much with punpk1 with vl % 512 != 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wrote too much with low-half zip (zip1) with vl % 512 != 0.
Adjust all of the x + (y << s) to x | (y << s) as a style fix.
We only ever have exact overlap between D, M, and N. Therefore
we only need a single temporary, and we do not need to check for
partial overlap.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed out on compressing the second half of a predicate
with length vl % 512 > 256.
Adjust all of the x + (y << s) to x | (y << s) as a
general style fix. Drop the extract64 because the input
uint64_t are known to be already zero-extended from the
current size of the predicate.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210309155305.11301-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert all sid printouts to sid=0x%x.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210309102742.30442-8-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the whole SID range (32b) is invalidated (SMMU_CMD_CFGI_ALL),
@end overflows and we fail to handle the command properly.
Once this gets fixed, the current code really is awkward in the
sense it loops over the whole range instead of removing the
currently cached configs through a hash table lookup.
Fix both the overflow and the lookup.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210309102742.30442-7-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of today, the driver can invalidate a number of pages that is
not a power of 2. However IOTLB unmap notifications and internal
IOTLB invalidations work with masks leading to erroneous
invalidations.
In case the range is not a power of 2, split invalidations into
power of 2 invalidations.
When looking for a single page entry in the vSMMU internal IOTLB,
let's make sure that if the entry is not found using a
g_hash_table_remove() we iterate over all the entries to find a
potential range that overlaps it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210309102742.30442-6-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the asid is not set, do not attempt to locate the key directly
as all inserted keys have a valid asid.
Use g_hash_table_foreach_remove instead.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210309102742.30442-5-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unmap notifiers work with an address mask assuming an
invalidation range of a power of 2. Nothing mandates this
in the VIRTIO-IOMMU spec.
So in case the range is not a power of 2, split it into
several invalidations.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20210309102742.30442-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
