imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The align option is used for activating the align algorithm
in order to synchronise the host clock and the guest clock.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make icount parameter use QemuOpts style options in order
to easily add other suboptions.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replaced '_' with '-' to comply with QOM guidelines.
Made the conversion from command line to QMP in vl.c.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If machine doesn't support memory hotplug then starting QEMU
with initial memory less than default will make QEMU exit with
following error message:
$QEMU -m 16 -M isapc
qemu-system-i386: "-memory 'slots|maxmem'" is not supported by: isapc
Set maxram_size to initial memory value before parsing
'maxmem' option allows to keep maxmem in sync with initial
memory size if no maxmem option was specified.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: Bruce Rogers <brogers@suse.com>
Reviewed-By: Bruce Rogers <brogers@suse.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have the experience that the guest doesn't stop successfully
though it was instructed to shut down.
The root cause may be not in QEMU mostly. However, QEMU is often
suspected at the beginning just because the issue occurred in
virtualization environment.
Therefore, we need to affirm that QEMU received the shutdown
request and raised ACPI irq from "virsh shutdown" command,
virt-manger or stopping QEMU process to the VM .
So that we can affirm the problems was belonged to the Guset OS
rather than the QEMU itself.
When we stop guests by "virsh shutdown" command or virt-manger,
or stopping QEMU process, qemu_system_powerdown_request() or
qemu_system_shutdown_request() is called. Then the below functions
in main_loop_should_exit() of Vl.c are called roughly in the
following order.
if (qemu_powerdown_requested())
qemu_system_powerdown()
monitor_protocol_event(QEVENT_POWERDOWN, NULL)
OR
if(qemu_shutdown_requested()}
monitor_protocol_event(QEVENT_SHUTDOWN, NULL);
The tracepoint of monitor_protocol_event() already exists, but no
tracepoints are defined for qemu_system_powerdown_request() and
qemu_system_shutdown_request(). So this patch adds two tracepoints for
the two functions. We believe that it will become much easier to
isolate the problem mentioned above by these tracepoints.
Signed-off-by: Yang Zhiyong <yangzy.fnst@cn.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will be added (after QOMification) as the QOM parent.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on "enable sparse node numbering" patch from Nishanth Aravamudan,
but without the code to actually support sparse node IDs. This just adds
the code to keep track of present/non-present nodes on the command-line,
without changing any behavior.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
[Rename max_numa_node to max_numa_nodeid -Eduardo]
[Initialize max_numa_nodeid to 0 -Eduardo]
[Use MAX() macro when setting max_numa_nodeid -Eduardo]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Don's patches to limit below-4g ram for pc
Marcel's pcie hotplug rewrite
Gabriel's changes to e1000 auto-negotiation
qemu char bugfixes by Stefan
misc bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTqEbfAAoJECgfDbjSjVRpFkoIAKj/JZvwQfOkDON12iIou8Fm
qFhn9t6Tf/HHvwhsrLrPH3wnmTiwJpnSrU2/X9SjSBqugiG4NdS2BrzGS1T5mNET
Q8q2CdYhrWzriCnNMotoug8oXIJGSfORITsU2c3zH7mLJHi5V6m78PZzLiiyTgJW
VS0Zb/F2YFn9vDA6vzSX3dUCH/1MGVwTf3pSaGBs3k1DwPT9OpV7ejdhqJ0SB03t
ih//P3E5t2+kkoUEUEqHVhRepvn0nrDq9fxL97scUbhx5Lz3hBteoewNjlqDsrCv
kbX+PswfSRWTEbjQ3yeGSyyzITIe/6W7rLb2gYAl2Efn/WDGIw2JXff2XPiro1I=
=qjXy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,net fixes, enhancements
Don's patches to limit below-4g ram for pc
Marcel's pcie hotplug rewrite
Gabriel's changes to e1000 auto-negotiation
qemu char bugfixes by Stefan
misc bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Jun 2014 16:25:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (23 commits)
xen-hvm: Handle machine opt max-ram-below-4g
pc & q35: Add new machine opt max-ram-below-4g
xen-hvm: Fix xen_hvm_init() to adjust pc memory layout
pcie: coding style tweak
hw/pcie: better hotplug/hotunplug support
hw/pcie: implement power controller functionality
hw/pcie: correct debug message
q35: Use PC_Q35_COMPAT_1_4 on pc-q35-1.4 compat_props
virtio-pci: Report an error when msix vectors init fails
qemu-char: avoid leaking unused fds in tcp_get_msgfds()
qemu-char: fix qemu_chr_fe_get_msgfd()
qapi/string-output-visitor: fix human output
e1000: factor out checking for auto-negotiation availability
e1000: move e1000_autoneg_timer() to after set_ics()
e1000: signal guest on successful link auto-negotiation
e1000: improve auto-negotiation reporting via mii-tool
e1000: emulate auto-negotiation during external link status change
qtest: fix vhost-user-test unbalanced mutex locks
qtest: fix qtest for vhost-user
libqemustub: add more stubs for qemu-char
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds a new command, '-dump-vmstate', that takes a filename
as an argument. When executed, QEMU will dump the vmstate information
for the machine type it's invoked with to the file, and quit.
The JSON-format output can then be used to compare the vmstate info for
different QEMU versions, specifically to test whether live migration
would break due to changes in the vmstate data.
A Python script that compares the output of such JSON dumps is included
in the following commit.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch also eliminates build time warning caused by no caller
of monitor_qapi_event_throttle().
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a pc & q35 only machine opt.
If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.
For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.
Note: this machine option cannot be used to increase the amount
of ram below 4G.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix 32 bit
There is no existing comments for POWERDOWN in doc/qmp/qmp-events.txt,
so no change on it like other conversion patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch also eliminates build time warning caused by
QAPI_EVENT_MAX = 0.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h. Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv. We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.
Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).
qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user. This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 4407ab055be995e64633322a78e64dfa376dc534
vl.c: extend -m option to support options for memory hotplug
prints ram_addr_t with u64 format, this is wrong for
some systems, in particular w32.
print ram_addr_t with RAM_ADDR_FMT to fix build on w32.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follow the lines of the HMP implementation, using OptsVisitor
to parse the options. This gives access to OptsVisitor's
rich parsing of integer lists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This option provides the infrastructure for binding guest NUMA nodes
to host NUMA nodes. For example:
-object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \
-numa node,nodeid=0,cpus=0,memdev=ram-node0 \
-object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
The option replaces "-numa node,mem=".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: conflict resolution
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the numa_info structure to contain the numa nodes memory,
VCPUs information and the future added numa nodes host memory
policies.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
[Fix hw/ppc/spapr.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: comment tweaks
Add following parameters:
"slots" - total number of hotplug memory slots
"maxmem" - maximum possible memory
"slots" and "maxmem" should go in pair and "maxmem" should be greater
than "mem" for memory hotplug to be enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix build on 32 bit
memory allocated for guest before QEMU is daemonized and then mapped
later in guest's address space after it is daemonized, leads to EPT
violation and QEMU aborts.
To avoid this and similar issues switch to daemonized mode early
before applying/processing other options.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add object to /objects before calling user_creatable_complete()
handler, so that object might be able to call
object_get_canonical_path() in its completion handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"Init" and "uninit" suggest the functions don't allocate / free
storage. But they do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds support to compile QEMU with multiple tracing backends at the same time.
For example, you can compile QEMU with:
$ ./configure --enable-trace-backends=ftrace,dtrace
Where 'ftrace' can be handy for having an in-flight record of events, and 'dtrace' can be later used to extract more information from the system.
This patch allows having both available without recompiling QEMU.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTkJ2iAAoJECgfDbjSjVRpk4oIALf6RC/Bm3bVaX5TSgqdt8UT
4vCf10V53KkbfhxN9dGyPluswz/gyY7M/nrOoi0BSbrQndSavgyNRCfMfBfIw1FO
yvfeyrkBkKBP4ViF6uogcSr79h3vQaXsqZIGmZUsdv3ZfVrLS+7dKsigVI6PumNR
8YBveGljFjn0nrCC2+M2+LDefcPGSEu9vea9hKER0uPuz1mib8otjm1PAH30QeW/
9q1bwFEwobFJk32vrayQrwGk5ECXCCHR8LPV1Rv9tyZLEqAbdiNrwGb4MycztLvK
UHuvNFNqUHKNe/tqvp1RPmWOY2aO8+u0570kc8nhXXq2/tjJTOCmQfmodE6hh8A=
=bwmA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,qdev fixes, tests
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream:
qdev: Add test of qdev_prop_check_global
qdev: Display warning about unused -global
tests: add smbios testing
tests: rename acpi-test to bios-tables-test
virtio-balloon: return empty data when no stats are available
pcie_host: Turn pcie_host_init() into an instance_init
SMBIOS: Fix type 17 field sizes
SMBIOS: Update Type 0 struct generator for machines >= 2.1
SMBIOS: Fix endian-ness when populating multi-byte fields
serial-pci: Set prog interface field of pci config to 16550 compatible
Conflicts:
include/hw/i386/pc.h
[PMM: fixed trivial conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This can help a user understand why -global was ignored.
For example: with "-vga cirrus"; "-global vga.vgamem_mb=16" is just
ignored when "-global cirrus-vga.vgamem_mb=16" is not.
This is currently clear when the wrong property is provided:
out/x86_64-softmmu/qemu-system-x86_64 -global cirrus-vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
qemu-system-x86_64: Property '.vram_size_mb' not found
Aborted (core dumped)
vs
out/x86_64-softmmu/qemu-system-x86_64 -global vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
VNC server running on `::1:5900'
^Cqemu: terminating on signal 2
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Make machine's QemuOpts QOM properties of /machine. The properties
are automatically filled in. This opens the possibility to create
opts per machine rather than global.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Filter out also 'type' property when setting
object's properties.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.
All the other changes are only mechanical refactoring, no semantic changes.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The 'name' option silently failed when used in config files
( http://lists.gnu.org/archive/html/qemu-devel/2014-04/msg00378.html )
-readconfig stores the configuration read in QemuOpts. Command line
option parsing should do the same, and no more. In particular it should
not act upon the option. That needs to be done separately, where both
command line and -readconfig settings are visible in QemuOpts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: William Dauchy <william@gandi.net>
Tested-by: William Dauchy <william@gandi.net>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(mjt: added commit message by ambru@ and subject prefix)
Clocks are initialized in qemu_init_main_loop. They are not needed before it.
Initializing them twice is not only unnecessary but is harmful: it results in
memory leak and potentially can lead to a situation where different parts of
QEMU use different sets of timers.
To avoid it remove init_clocks call from main and add an assertion to
qemu_clock_init that corresponding clock has not been initialized yet.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VoYL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140505' into staging
migration/next for 20140505
# gpg: Signature made Mon 05 May 2014 21:27:24 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140505: (36 commits)
migration: expose xbzrle cache miss rate
migration: expose the bitmap_sync_count to the end
migration: Add counts of updating the dirty bitmap
XBZRLE: Fix one XBZRLE corruption issues
migration: remove duplicate code
Coverity: Fix failure path for qemu_accept in migration
Init the XBZRLE.lock in ram_mig_init
Provide init function for ram migration
Count used RAMBlock pages for migration_dirty_pages
Make qemu_peek_buffer loop until it gets it's data
Disallow outward migration while awaiting incoming migration
virtio: validate config_len on load
virtio-net: out-of-bounds buffer write on load
openpic: avoid buffer overrun on incoming migration
ssi-sd: fix buffer overrun on invalid state load
savevm: Ignore minimum_version_id_old if there is no load_state_old
usb: sanity check setup_index+setup_len in post_load
vmstate: s/VMSTATE_INT32_LE/VMSTATE_INT32_POSITIVE_LE/
virtio-scsi: fix buffer overrun on invalid state load
zaurus: fix buffer overrun on invalid state load
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide ram_mig_init (like blk_mig_init) for vl.c to initialise stuff
to do with ram migration (currently in arch_init.c).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
No need to go through qemu_machine field. Use
MachineClass fields directly.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This minimizes QEMUMachine usage, as part of machine QOM-ification.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QEMUMachine's fields are already in MachineClass. We can safely
make the switch because we copy them in machine_class_init() and
spapr_machine_class_init().
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In order to eliminate the QEMUMachine indirection,
add its fields directly to MachineClass.
Do not yet remove qemu_machine field because it is
still in use by sPAPR.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
[AF: Copied fields for sPAPR, too]
Signed-off-by: Andreas Färber <afaerber@suse.de>
'writeconfig' supports output to stdout (with '-'); when that happens,
we must not close stdout, or further command line options that also use
stdout will be impacted. (Although 'writeconfig' was copied from
'readconfig', the latter does not have the problem because it does not
support reading from '-')
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CODING_STYLE frowns upon mixing declarations and statements. main()
has such a declaration. Clean up by eliminating the variable.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
"This if else has no code between it and the end of the enclosing
while loop. This makes this continue redundant."
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Adds option to -m
"size" - startup memory amount
For compatibility with legacy CLI if suffix-less number is passed,
it assumes amount in Mb.
Otherwise user is free to use suffixed number using suffixes b,k/K,M,G
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When you ask for an accelerator not supported for your target, you get
a bogus "accelerator does not exist" message:
$ qemu-system-arm -machine none,accel=kvm
KVM not supported for this target
"kvm" accelerator does not exist.
No accelerator found!
Suppress it.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Improve the clarity of the message QEMU prints when the user
doesn't specify a machine model to use and there is no default.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
glib versions prior to 2.31.0 require an explicit g_thread_init() call
to enable multi-threading.
Failure to initialize threading causes glib to take single-threaded code
paths without synchronization. For example, the g_slice allocator will
crash due to race conditions.
Fix this for all QEMU tool programs (qemu-nbd, qemu-io, qemu-img) by
moving the g_thread_init() call from vl.c:main() into a new
osdep.c:thread_init() constructor function.
thread_init() has __attribute__((constructor)) and is automatically
invoked by the runtime during startup.
We can now drop the "simple" trace backend's g_thread_init() call since
thread_init() already called it.
Note that we must keep coroutine-gthread.c's g_thread_init() call which
is located in a constructor function. There is no guarantee for
constructor function ordering so thread_init() may only be called later.
Reported-by: Mario de Chenno <mario.dechenno@unina2.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
More small fixes all over the place.
Notably fixes for big-endian hosts by Marcel.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTMAvDAAoJECgfDbjSjVRptUEIAMYNC76eQSPNoVv9vP/XaTT1
c9TE67jo6HfxO7JaHSishyaf0bNrGIske+ua3J4NbiEAHnX22SDjn0o/CmX+tbjb
n70hpjF+KNgt0SR/Wxsl8nOa+nwsrbrlv/ReN7UehGicH+Af2OR65PZFwKwC3pjF
nupmucOmCBQzcmWDzx+DgSXulh02bfmpRHJo/EMhg7RXnkdNPnlwh5klycotJVgW
ggnY9IRuPr1m4Aq4V7wN/I8kIpkcAJxF5RlxdyopsdQtklLItSRi4xiMJlkhIPjA
lLdkOiFnVFKSggiVy9LFTdQWtGog1H4sVypM6J6Z2zOIKQsJFvHMpCrbcE8+7CY=
=C8sW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,test bug fixes
More small fixes all over the place.
Notably fixes for big-endian hosts by Marcel.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 24 Mar 2014 10:41:07 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
tests/acpi-test: do not fail if iasl is broken
vl.c: Use MAX_CPUMASK_BITS macro instead of hardcoded constant
sysemu.h: Document what MAX_CPUMASK_BITS really limits
acpi: fix endian-ness for table ids
acpi-test: signature endian-ness fixes
i386/acpi-build: support hotplug of VCPU with APIC ID 0xFF
acpi-test: rebuild SSDT
i386/acpi-build: allow more than 255 elements in CPON
pc: Refuse max_cpus if it results in too large APIC ID
acpi: Don't use MAX_CPUMASK_BITS for APIC ID bitmap
acpi: Assert sts array limit on AcpiCpuHotplug_add()
pc: Refuse CPU hotplug if the resulting APIC ID is too large
acpi: Add ACPI_CPU_HOTPLUG_ID_LIMIT macro
acpi-test: update expected SSDT files
acpi-build: fix misaligned access
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As suffixes do not make sense for sPAPR's device tree and
there is no way to filter them out on the BusState::get_fw_dev_path()
level, let's add an ability for the external caller to specify
whether to apply suffixes or not.
We could handle suffixes in SLOF (ignored for now) but this would require
serious rework in the node opening code in SLOF, which has no obvious
benefit for the currently emulated sPAPR machine.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Machine rewriting added MACHINE() macro which is
already in use by other OpenBSD library.
Since qemu/sockets.h exposes the OpenBSD namespace,
the minimalistic approach is to add it as the first QEMU include.
Reported-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 261747f176 (vl: Use MachineClass instead of global
QEMUMachine list) valgrind complains about the following:
==54082== 57 bytes in 3 blocks are definitely lost in loss record 365 of
729
==54082== at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==54082== by 0x4145569: g_malloc (in
/usr/lib64/libglib-2.0.so.0.3400.2)
==54082== by 0x415F9E9: g_strconcat (in
/usr/lib64/libglib-2.0.so.0.3400.2)
==54082== by 0x80157FE7: qemu_register_machine (vl.c:1597)
==54082== by 0x80208E6B: module_call_init (module.c:105)
==54082== by 0x80013B91: main (vl.c:3000)
Turns out that valgrind is right. We simply forget the memory that
g_strconcat() has allocated. Lets free it after the type_register().
We need a 2nd variable due to constness of the name part of the
type structure.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Output error message using qemu's error_report() function when user
provides the invalid machine type on the command line. This also saves
time to find what issue is when you downgrade from one version of qemu
to another that doesn't support required machine type yet (the version
user downgraded to have to have this patch applied too, of course).
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
[Replace printf with error_printf, suggested by Markus Armbruster. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before spapr_vga_init will returned false if the vga is specified by
the command '-device VGA' because vga_interface_type was evaluated to
VGA_NONE. With the change in previous patch of this series,
spapr_vga_init should return true if it's told that the vga will be
initialized in flow of the generic devices initialization.
To keep '-nodefaults' have the semantics of bare minimum, it adds a
check of 'has_defaults' in usb_enabled() to avoid that a USB controller
is added by '-nodefautls, -device VGA' implicitly.
This patch also makes two cleanups:
1. skip initialization for VGA_NONE
2. remove the useless 'break'
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some machine (like pseries) initialization code determines if it has
graphics according to vga_interface_type. In the original code,
vga_interface_type is evaluated to VGA_NONE even if a VGA is added
via '-device VGA'. It causes the machine not aware of the graphics
device configured. Add a new VGA device type to indicate that it has a
VGA device, which will be initialized in QOM device initialization.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In order to allow attaching machine options to a machine instance,
current_machine is converted into MachineState.
As a first step of deprecating QEMUMachine, some of the functions
were modified to return MachineClass.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The machine registration flow is refactored to use the QOM functionality.
Instead of linking the machines into a list, each machine has a type
and the types can be traversed in the QOM way.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This collects several small fixes from all over the place.
Additionally, Marcel's changes make acpi unit tests more robust.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTHL2xAAoJECgfDbjSjVRpAHQH/itdRvT3ILcoCn4gIgfBpq1w
BuqdXBtLx5yiNSWiZoZZQ0HIaf6DUuCY7bRE7CwijjwDHNsMyweslT1L3f/T6g7l
OcxOtDbs0Vtnv7w/FBc9hPRTBYPQk5O4/IFmfI9hGivcq7T2y/s36709ahtSGgQK
iF5+1zI+mu4FPYDaX9s94barn6Sq+Ag56I7rybkAZ+X0OAASBwsF+8s8q+wAmLoF
QBk7/U+EpcR/9GwxKoN6Mg8gs+kOXi5imkeLN+YnSttEhq87Zk2OU9RPQqanWC5X
mEykhxcn6kQtpmQS19XkwU2pPOSZyytx+CrxLicVtackKynzLqNFzPtvys0t5Ak=
=NCfd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,pci,virtio,memory bug fixes
This collects several small fixes from all over the place.
Additionally, Marcel's changes make acpi unit tests more robust.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 09 Mar 2014 19:14:57 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
qemu: x86: ignore ioapic polarity
pckbd: return 'keyboard enabled' on read input port command
pam: partly fix write-only mode
acpi-test: issue errors instead of warnings when possible
acpi-test: retain both asl and aml files on failure
MAINTAINERS: drop an out of date address
Add a 'name' parameter to qemu_thread_create
Add 'debug-threads' suboption to --name
Rework --name to use QemuOpts
PCIE: fix regression with coldplugged multifunction device
memory_region_present: return false if address is not found in child MemoryRegion
virtio-net: remove function calls from assert
acpi-test-data: update expected files
acpi-build: append description for non-hotplug
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add flag storage to qemu-thread-* to store the namethreads flag
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It might be useful for tracing migration.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Targets like ppc64 support different types of KVM, one which use
hypervisor mode and the other which doesn't. Add a new machine
option kvm-type that helps in selecting the respective ones
We also add a new QEMUMachine callback get_vm_type that helps
in mapping the string representation of kvm type specified.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[agraf: spelling fixes, use error_report(), use qemumachine.h]
Signed-off-by: Alexander Graf <agraf@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iJwEAAECAAYFAlMVbyQACgkQUlPFrXTwyDiuBgP9EaFEriPW4li4kaBrumE9O2nu
ER41cdj9IlcmrfoucnXJVbQU0Ya8qS4qEGNOcuX8zz19TVK7d59r6ZPJh3ZcCrca
MebkJLDpclrK688uv2jS3Bu6PRO2ROtsjQ3R0vySgj3DmBDUlm9/cJ2/T3GWvFAf
AnRwz3dNnSSQ9Jo+4y4=
=0A4X
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-03-04' into staging
trivial patches for 2014-03-04
# gpg: Signature made Tue 04 Mar 2014 06:13:56 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-03-04:
vl: Remove unneeded include file
qga: Remove unneeded include file
qemu-img: Remove unneeded include files
exec: Remove unneeded include files
util/iov: Use qemu/sockets.h instead of conditional code
qjson.h: Remove spurious GCC_FMT_ATTR markup from qobject_from_json() declaration
tests/test-int128: Don't use __noclone__ attribute on clang
stubs: Optimize dependencies for gdbstub.c
tcg: Fix typo in comment (dependancies -> dependencies)
bswap: Modify prototypes of st[wl]_{le, be}_p (avoid type conversions)
bswap: Modify prototype of stb_p (avoid type conversions)
object: Report type in error when not user creatable.
include/qemu/host-utils.h: Trivial typo: ctz->cto
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This file does not depend on windows.h.
Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In order to allow the user to choose the framebuffer for sparc-softmmu, add
-vga tcx and -vga cg3 options to the QEMU command line. If no option is
specified, the default TCX framebuffer is used.
Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the
validation rules to allow both displays to be initiated at the higher
resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to
the normal QEMU sun4m default resolution of 1024x768).
Finally move any fprintf(stderr ...) statements in the areas affected by this
patch over to the new error_report() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KRcc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this change, main() calls qemu_init_exec_dir and uses argv[0] to
init exec_dir. The saved value can be retrieved with
qemu_get_exec_dir later. It will be reused by module loading.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Over time, lots of stuff moved from vl.c into separate
files. But include statements has never been cleaned,
and they continue to carry lots of anymore-unused stuff.
Remove includes which are not relevant for vl.c anymore.
Apparently there are more includes like this, because
many are included from qemu-common.h and the like, or,
for example, I don't see were we use win32-specific
stuff in vl.c (so that maybe #include <windows.h> might
be removed too).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sure, CHS translation is an obscure topic, and legacy options for
hard-disk geometries are obscure as well. But since QEMU does nothing
with it except telling the BIOS, and since there "large" and "rechs"
are listed in the enums, parsing them seems to be the bare minimum.
Acked-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This prints an error message, instead of core dump, when "-qtest"
option value is invalid, e.g.:
$ ./x86_64-softmmu/qemu-system-x86_64 -qtest unknown
qemu-system-x86_64: Failed to initialize device for qtest:
"unknown"
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
qtest driver always uses signals to kill qemu
no need to report it, whatever the accelerator state.
Add API to detect qtest driver, and suppress reporting
signals in this case.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
qtest driver always uses signals to kill qemu
no need to report it, whatever the accelerator state.
Add API to detect qtest driver, and suppress reporting
signals in this case.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS5nJdAAoJEJykq7OBq3PIUV8H/1Vz4Ug/iI0TgUkbyRtoZ/E3
3C5BCO0SyPnZ91iCzbNXo8IcTYejSPeMT951XSxrz/lg5HDqN+vyA1IQzJUc1Sbn
tP+VYffsRAJ/5jW2Jj2cdCxlAIob60THS8Z3Z/NqubcxTlBcbmuFykZLbLhU+DbU
dow3E+hla/I1A/6bjcQ/8u5a4asp9zqRuvOqwcf7i1kNChfYv2/rCrtiWjQhKktq
uqFX2vVL8lmJanp+lOsZcUID4w0Ot6uJNrtzofxvg7OtMfVPb0G8PMcq8/Zxnz72
NJfKuBsAV7/hwWm5EKKRGJRHko29ymOFkuGQR7e0aF8ZdPA0ByQWnPXmgE1p5V0=
=QnyD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'stefanha/tags/tracing-pull-request' into staging
Tracing pull request
# gpg: Signature made Mon 27 Jan 2014 14:51:09 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* stefanha/tags/tracing-pull-request:
trace: fix simple trace "disable" keyword
trace: add glib 2.32+ static GMutex support
trace: [simple] Do not include "trace/simple.h" in generated tracer headers
tracing: start trace processing thread in final child process
Message-id: 1390834386-23139-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduces USER_CREATABLE interface that must be implemented by
objects which are designed to created with -object CLI option or
object-add QMP command.
Interface provides an ability to do an optional second stage
initialization of the object created with -object/object-add
commands. By providing complete() callback, which is called
after the object properties were set.
It allows to:
* prevents misusing of -object/object-add by filtering out
objects that are not designed for it.
* generalize second stage backend initialization instead of
adding custom APIs to perform it
* early error detection of backend initialization at -object/
object-add time rather than through a proxy DEVICE object
that tries to use backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
object_property_add_child() may fail if 'id' matches
an already existing object. Which means an incorrect
command line.
So instead of silently ignoring error, report it and
terminate QEMU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When running with trace backend e.g. "simple" the writer thread needs to be
implemented in the same process context as the trace points that will be
processed. Under libvirtd control, qemu gets first started in daemonized
mode to privide its capabilities. Creating the writer thread in the initial
process context then leads to a dead lock because the thread gets termined
together with the initial parent. (-daemonize)
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[minor whitespace fixes]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The object must be unref-ed when its variable goes out of scope.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This fixes an abort if you invoke the "migrate" command while the
guest is being debugged.
Cc: qemu-stable@nongnu.org
Cc: lcapitulino@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 6ef4716 cleaned up parsing of -boot option argument, but
accidentally dropped parameter strict. It should have been updated
exactly like parameter menu. Do that.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_opts_parse() can always return NULL, even if the QemuOptsList.desc in
question would be trivial to satisfy (eg. because it's empty). For
example:
qemu_opts_parse()
opts_parse()
qemu_opts_create()
id_wellformed()
In practice:
$ .../qemu-system-x86_64 -acpitable id=3
qemu-system-x86_64: -acpitable id=3: Parameter 'id' expects an identifier
**
ERROR:vl.c:3491:main: assertion failed: (opts != NULL)
Aborted (core dumped)
$ .../qemu-system-x86_64 -smbios id=3
qemu-system-x86_64: -smbios id=3: Parameter 'id' expects an identifier
Segmentation fault (core dumped)
I checked all qemu_opts_parse() invocations (and all drive_def()
invocations too, because it blindly forwards the former's retval). Only
the two above examples look problematic.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1385658779-7529-1-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
qtest uses the icount infrastructure to implement a test-driven vm_clock. This
however is not necessary when using -qtest as a "probe" together with a normal
TCG-, KVM- or Xen-based virtual machine. Hence, split out the call to
configure_icount into a new function that is called only for "-machine
accel=qtest"; and disable those commands when running with an accelerator
other than qtest.
This also fixes an assertion failure with "qemu-system-x86_64 -machine
accel=qtest" but no -qtest option. This is a valid case, albeit somewhat
weird; nothing will happen in the VM but you'll still be able to
interact with the monitor or the GUI.
Now that qtest_init is not limited to an int(void) function, change
global variables that are not used outside qtest_init to arguments.
And finally, cleanup useless parts of include/sysemu/qtest.h. The file
is not used at all for user-only emulation, and qtest is not available
on Win32 due to its usage of sigwait.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Put it in QEMUMachineInitArgs, so I don't have to touch every board.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Alex Williamson (1) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: fix cpuid leaf 0x0d
qemu: mempath: prefault pages manually (v4)
kvm: Query KVM for available memory slots
Message-id: 1386345276-9803-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Update vgabios, switch from lgplvgabios to seavgabios.
Update build process to build both 128k and 256k bios versions.
Use 256k bios for pc-*-2.0+ machine types.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJSoYRUAAoJEEy22O7T6HE4a18QAL5at1YcMp40N8EDJ268/xl0
+t2WGu2847imEhJ2lhI6gb1bmg2XdYYTtOfmIspC58BObpoJT4wppPo7JmGrGvL+
UYpge8mt/NkmzUjDz98sDKL3vqAq5ZFg4olMMIMNmNKCsyrq3Cz6U+/5F+2XMdHH
P5tMqNvAFqNHWUhjcDxPNF7jWpsZkMKQb2RV1zKzZD7nvuf2wZmZjzsEjCLh3JzO
pN2A4blgN3LTmoomf/HSaFmqGdrsuoDXtQ0s5JLCaZATONK7tr7/ZFhgxykHP+Ol
lenfmYKJba5KAO/rH7lN3DlF460HZClq734i9NXkTKGXPvPJ7mCMhJ79SIWZQcWx
u4mPKBvuE5hk596jV0lscNOTNqRk8fVw7aOgSgGpfOUtf72pl2jy70gCsXLpS9R3
zhazAQHDU5v55FHIsnGJ0igkrj0usliWoT89UBAcaYCbq/vKyVp9jKgWHYHLbJuM
Xr2rm8aQI0i/ZtSImHqxmg+UfrLdCcwKlW4gpUlqdO6w1Rd1m3GkY1RXbuSi9RYO
eGTcc51d8RJXxa1k24BkGOf9FPVjf8MmyOwy4mBbNp01+hU6XzdWs1E5kr7zQ65M
+apRsBJadcTtbG8kXuOMdSwhpkc1H0PuERppDyDSV9aS0NlPdyBMzr/H2T3szEsH
yqtyTFxZs23m3IWFYmvO
=nfH6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kraxel/tags/pull-seabios-31b8b4e-1' into staging
Update seabios to master snapshot (pre-1.7.4).
Update vgabios, switch from lgplvgabios to seavgabios.
Update build process to build both 128k and 256k bios versions.
Use 256k bios for pc-*-2.0+ machine types.
# gpg: Signature made Fri 06 Dec 2013 12:01:24 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/tags/pull-seabios-31b8b4e-1:
pc: switch 2.0 machine types to large seabios binary
roms: update vgabios binaries
roms: update seabios binaries
roms: enable seabios cross builds
roms: build two seabios binaries
roms: update seabios submodule to 31b8b4eea9d9ad58a73b22a6060d3ac1c419c26d
add firmware to machine options
add pc-{i440fx,q35}-2.0 machine types
Message-id: 1386322527-23148-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds firmware to the machine options. -bios <file> becomes a
shortcut for -machine firmware=<file>. Advantage is that the firmware
can be specified via config file as -machine is parsed using QemuOpts
and it is also possible to use different defaults for different
machine types (via QEMUMachine->default_machine_opts).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With this we no longer pass down envp, and thus all systems can have
the same void prototype. So also eliminate a useless thunk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].
This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following error occurs when building with no graphic output support:
vl.c: In function ‘main’:
vl.c:2829:19: error: variable ‘ds’ set but not used [-Werror=unused-but-set-variable]
DisplayState *ds;
^
cc1: all warnings being treated as errors
To reproduce this issue, just run:
$ ./configure \
--disable-curses \
--disable-sdl \
--disable-cocoa \
--disable-gtk \
--disable-vnc \
--enable-werror
$ make vl.o
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After reporting the GUEST_PANICKED monitor event, QEMU stops the VM.
The reason for this is that events are edge-triggered, and can be lost if
management dies at the wrong time. Stopping a panicked VM lets management
know of a panic even if it has crashed; management can learn about the
panic when it restarts and queries running QEMU processes. The downside
is of course that the VM will be paused while management is not running,
but that is acceptable if it only happens with explicit "-device pvpanic".
Upon learning of a panic, management (if configured to do so) can pick a
variety of behaviors: leave the VM paused, reset it, destroy it. In
addition to all of these behaviors, it is possible to dump the VM core
from the host.
However, right now, the panicked state is irreversible, and can only be
exited by resetting the machine. This means that any policy decision
is entirely in the hands of the host. In particular there is no way to
use the "reboot on panic" option together with pvpanic.
This patch makes the panicked state reversible (and removes various
workarounds that were there because of the state being irreversible).
With this change, management has a wider set of possible policies: it
can just log the crash and leave policy to the guest, it can leave the
VM paused. In particular, the "log the crash and continue" is implemented
simply by sending a "cont" as soon as management learns about the panic.
Management could also implement the "irreversible paused state" itself.
And again, all such actions can be coupled with dumping the VM core.
Unfortunately we cannot change the behavior of 1.6.0. Thus, even if
it uses "-device pvpanic", management should check for "cont" failures.
If "cont" fails, management can then log that the VM remained paused
and urge the administrator to update QEMU.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This patch fixes spice display initialization to handle
multihead properly.
spice-core now keeps track of which QemuConsole has a spice
display channel attached to it and which has not. It also
manages display channel ids.
spice-display looks at all QemuConsoles and will pick up any
graphic console not yet bound to a spice channel (which in practice
are all non-qxl graphic devices).
Result is that
(a) you'll get a spice client window for each graphical device
now (first only without this patch), and
(b) mixing qxl and non-qxl vga cards works properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSR83kAAoJECgfDbjSjVRpX08H/jKgYBNJaChev1TROIVHEGbu
IzvkjfocvKO+6wmhOf5x+xwFmzrijUMa1CPvOkCp8c2A3Iek7rmnedknlhXYh7dM
z5mXcvFGjnu7ST38ydF/Emk9+Z6rRg5Y/hkmlDyr+9lNcoiCDLXXcUrKjeIHNoWl
e8w3yiPCJ528QyrLwQ890XetJphv67pMlsjMgLQ2betMk++Ac/ctUf1D2p1X4NeQ
Q2drbo5Z4yDk0i6QMA3iLq1Bh/AhE10bCDq9rCzfZGIKVyncL6ne2pSi/xDvpLrF
dmxoiJ5QrK6xLnagCcn5T6SB9DkwbEPdL7qCqlxZ8USr7cVyPdzYtHtGSBWdeXY=
=xF01
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
smbios: Factor out smbios_maybe_add_str()
smbios: Make multiple -smbios type= accumulate sanely
smbios: Improve diagnostics for conflicting entries
smbios: Convert to QemuOpts
smbios: Normalize smbios_entry_add()'s error handling to exit(1)
virtio-net: fix up HMP NIC info string on reset
pci: remove explicit check to 64K ioport size
piix4: disable io on reset
piix: use 64 bit window programmed by guest
q35: use 64 bit window programmed by guest
pci: add helper to retrieve the 64-bit range
range: add min/max operations on ranges
range: add Range to typedefs
q35: make pci window address/size match guest cfg
Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME. If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).
Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME). The others are ignored.
"First one wins, subsequent ones get ignored silently" isn't nice. We
commonly let the last option win. Useful, because it lets you
-readconfig first, then selectively override with command line
options.
Clean up -smbios to work the common way. Accumulate the settings,
with later ones overwriting earlier ones. Put the result into fw_cfg
(no more useless duplicates).
Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So that it can be set in config file for -readconfig.
This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...
MST: drop one chunk to fix build errors
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently Xen hvm s3 has a bug coming from the difference between
qemu-traditioanl and qemu-xen. For qemu-traditional, the way to
resume from hvm s3 is via 'xl trigger' command. However, for
qemu-xen, the way to resume from hvm s3 inherited from standard
qemu, i.e. via QMP, and it doesn't work under Xen.
The root cause is, for qemu-xen, 'xl trigger' command didn't reset
devices, while QMP didn't unpause hvm domain though they did qemu
system reset.
We have two qemu patches and one xl patch to fix Xen hvm s3 bug.
This patch is the qemu patch 1. It adjusts qemu wakeup so that
Xen s3 resume logic (which will be implemented at qemu patch 2)
will be notified after qemu system reset.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To allow disable usb-bt-dongle device using CONFIG_BLUETOOTH option, some of
functions in vl.c file has to be made accessible in dev-bluetooth.c. This is
pure code moving.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Convert rtc_clock to be a QEMUClockType
Move rtc_clock users to use the new API
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Spice has two display interface implementations: One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.
The generic one is activated in case spice is used without qxl. The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed. Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.
https://bugzilla.redhat.com/show_bug.cgi?id=981094
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make it QEMU_OPT_NUMBER, so it gets parsed by generic code, which
actually bothers to check for errors, rather than its user, which
doesn't.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Message-id: 1372943363-24081-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The previous two commits fixed bugs in -machine option queries. I
can't find fault with the remaining queries, but let's use
qemu_get_machine_opts() everywhere, for consistency, simplicity and
robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Multiple -machine options with the same ID are merged. All but the
one without an ID are to be silently ignored.
In most places, we query these options with a null ID. This is
correct.
In some places, we instead query whatever options come first in the
list. This is wrong. When the -machine processed first happens to
have an ID, options are taken from that ID, and the ones specified
without ID are silently ignored.
Example:
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: disabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
USB support not enabled
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
xen be core: can't open xen interface
failed to initialize Xen: Operation not permitted
Option usb is queried correctly, and the one without an ID wins,
regardless of option order.
Option accel is queried incorrectly, and which one wins depends on
option order and ID.
Affected options are accel (and its sugared forms -enable-kvm and
-no-kvm), kernel_irqchip, kvm_shadow_mem.
Additionally, option kernel_irqchip is normally on by default, except
it's off when no -machine options are given. Bug can't bite, because
kernel_irqchip is used only when KVM is enabled, KVM is off by
default, and enabling always creates -machine options. Downstreams
that enable KVM by default do get bitten, though.
Use qemu_get_machine_opts() to fix these bugs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To be used in the next few commits to fix or clean up queries of
"machine" options (-machine and its sugared forms).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also introduces a new suboption, "cpus=",
which is the default. So after this patch,
-smp n,sockets=y
is the same as
-smp cpus=n,sockets=y
(with "cpu" being some generic thing, referring to
either cores, or threads, or sockets, as before).
We still don't validate relations between different
numbers, for example it is still possible to say
-smp 1,sockets=10
and it will be accepted to mean sockets=1.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 1372072012-30305-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reformats #ifdef..#endif and case statement a bit,
to make it a bit shorter and matching other cases like that
(no code changes).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Option "once" sets up a different boot order just for the initial
boot. Boot order reverts back to normal on reset. Option "order"
changes the normal boot order.
The reversal is implemented by reset handler restore_boot_devices(),
which takes the boot order to revert to as argument.
restore_boot_devices() does nothing on its first call, because that
must be the initial machine reset. On its second call, it changes the
boot order back, and unregisters itself.
Because we register the handler right when -boot gets parsed, we can
revert to an incorrect normal boot order, and multiple -boot can
interact in funny ways.
Here's how things work without -boot once or order:
* boot_devices is "".
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "". machine->init() configures firmware
accordingly. For PC machines, machine->boot_order is "cad", and
pc_cmos_init() writes it to RTC CMOS, where SeaBIOS picks it up.
Now consider -boot order=:
* boot_devices is "".
* -boot order= sets boot_devices to "" (no change).
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "", as above.
Bug: -boot order= has no effect. Broken in commit e4ada29e.
Next, consider -boot once=a:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* main() passes boot_devices "a" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "a".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of machine->boot_order. The
actual boot order depends on how firmware interprets "". Broken
in commit e4ada29e.
Next, consider -boot once=a -boot order=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot order=c sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "c".
Bug: it should be "a". I figure this has always been broken.
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of "c". I figure this has
always been broken, just differently broken before commit
e4ada29e.
Next, consider -boot once=a -boot once=b -boot once=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot once=b registers restore_boot_devices() with argument "a", and
sets boot_devices to "b".
* -boot once=c registers restore_boot_devices() with argument "b", and
sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
- restore_boot_devices() gets called with argument "a". Calls
qemu_boot_set("a") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
- restore_boot_devices() gets called with argument "b". Calls
qemu_boot_set("b") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
* Machine boots, boot order is "b".
Bug: should really be "c", because that came last, and for all other
-boot options, the last one wins. I figure this was broken some
time before commit 37905d6a, and fixed there only for a single
occurence of "once".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Same bug as above: boot order reverts to "" instead of
machine->boot_order.
Fix by acting upon -boot options order, once and menu only after
option parsing is complete, and the machine is known. This is how the
other -boot options work already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 3d3b8303 threw in some QemuOpts parsing without replacing the
existing ad hoc parser, resulting in a confusing mess. Clean it up.
Two user-visible changes:
1. Invalid options are reported more nicely. Before:
qemu: unknown boot parameter 'x' in 'x=y'
After:
qemu-system-x86_64: -boot x=y: Invalid parameter 'x'
2. If -boot is given multiple times, options accumulate, just like for
-machine. Before, only options order, once and menu accumulated.
For the other ones, all but the first -boot in non-legacy syntax
got simply ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 047d4e151d "Unbreak -no-quit for GTK, validate SDL options" broke
build of qemu without sdl, by referencing `no_frame' variable which is defined
inside #if SDL block. Fix that by defining that variable unconditionally.
This is a better fix for the build issue introduced by that patch than
a revert. This change keeps the new functinality introduced by that patch
and just fixes the compilation. It still is not a complete fix around the
original issue (not working -no-frame et al with -display gtk), because it
makes only the legacy interface working, not the new suboption interface,
so a few more changes are needed.
Cc: Peter Wu <lekensteyn@gmail.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Wu <lekensteyn@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371292923-28105-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Certain options (-no-frame, -alt-grab, -ctrl-grab) only make sense with SDL.
When compiling without SDL, these options (and -no-quit) print an error message
and exit qemu.
In case QEMU is compiled with SDL support, the three aforementioned options
still do not make sense with other display types. This patch addresses that
issue by printing a warning. I have chosen not to exit QEMU afterwards because
having the option is not harmful and before this patch it would be ignored
anyway.
By delaying the sanity check from compile-time with some ifdefs to run-time,
-no-quit is now also properly supported when compiling without SDL.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Aiming for GTK as replacement for SDL, a feature like -full-screen should also
be implemented.
Bringing the window into full-screen mode is done by activating the "Fullscreen"
menu item. This is done after showing the windows to make the cursor and menu
hidden.
v2: drop -no-frame implementation, use booleans instead of ints and ensure
consistency between ui state and menu.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While in general we forbid a "continue" from the guest panicked
state, it makes sense to have an exception for that when continuing
in the debugger. Perhaps the guest entered that state due to a bug,
for example, and we want to continue no matter what.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1370272015-9659-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a problem that after guest panic happens, virsh dump without
--memory-only fails:
ERROR: invalid runstate transition: 'guest-panicked' -> 'finish-migrate'
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369046780-17498-1-git-send-email-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VCPUs are either resumed directly via vm_start(), after the incoming
migration is done, or when a continue command is issued. We don't need
the explicit resume before entering main_loop().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If hotplugged, synchronize CPU state to KVM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>