Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for sharing the code between timers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that we also clear the data and clock interrupts at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are used by MacOS 9 on boot. Here we return an error except for 4-byte
commands which write to the IIC bus in a similar manner to MOL.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This simply returns an empty response with no error status as implemented by
MOL to allow MacOS 9 boot to proceed further.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to comments in MOL, the response to a CUDA_PACKET should be one of
the following:
Reply: (CUDA_PACKET, status, cmd)
Error: (ERROR_PACKET, status, CUDA_PACKET, cmd)
Update cuda_receive_packet() accordingly to reflect this in order to make
MacOS 9 happy.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to MOL, ADB error packets should be of the form (type, status, cmd)
rather than just (type, status). This fixes ADB device detection under MacOS 9.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mac99 machines always have a USB controller. Usually not having one around
doesn't hurt quite as much, but Mac OS 9 really really wants one or it crashes
on bootup.
So always add OHCI to make it happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The lswx instruction checks whether the desired string actually fits
into all defined registers. Unfortunately it does the calculation wrong,
resulting in illegal instruction traps for loads that really should fit.
Fix it up, making Mac OS happier.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the ISA setting the Rc bit on mtspr is undefined behavior.
Real 750 hardware simply ignores the bit and doesn't touch cr0 though.
Unfortunately, Mac OS 9 relies on this fact and executes a few mtspr
instructions (to set XER for example) with Rc set.
So let's handle the bit the same way hardware does and ignore it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- bugfixes for LE host and for pci translation
- MAINTAINERS update
- hugetlbfs enablement (kernel patches pending)
- boot from El Torito iso images on virtio-blk
(boot from scsi pending)
- cleanup in the ipl device code
There's also a helper function for resetting busless devices in the
qdev core in there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=c7KM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20151111' into staging
Hopefully last big batch of s390x patches, including:
- bugfixes for LE host and for pci translation
- MAINTAINERS update
- hugetlbfs enablement (kernel patches pending)
- boot from El Torito iso images on virtio-blk
(boot from scsi pending)
- cleanup in the ipl device code
There's also a helper function for resetting busless devices in the
qdev core in there.
# gpg: Signature made Wed 11 Nov 2015 17:49:58 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20151111:
s390: deprecate the non-ccw machine in 2.5
s390x/ipl: switch error reporting to error_setg
s390x/ipl: clean up qom definitions and turn into TYPE_DEVICE
qdev: provide qdev_reset_all_fn()
pc-bios/s390-ccw: rebuild image
pc-bios/s390-ccw: El Torito 16-bit boot image size field workaround
pc-bios/s390-ccw: El Torito s390x boot entry check
pc-bios/s390-ccw: ISO-9660 El Torito boot implementation
pc-bios/s390-ccw: Always adjust virtio sector count
s390x/kvm: don't enable CMMA when hugetlbfs will be used
s390x: switch to memory_region_allocate_system_memory
MAINTAINERS: update virtio-ccw/s390 git tree
MAINTAINERS: update s390 file patterns
s390x/pci : fix up s390 pci iommu translation function
s390x/css: sense data endianness
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=lGhw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 11 Nov 2015 16:03:19 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (41 commits)
iotests: Check for quorum support in test 139
qcow2: Fix qcow2_get_cluster_offset() for zero clusters
iotests: Add tests for the x-blockdev-del command
block: Add 'x-blockdev-del' QMP command
block: Add blk_get_refcnt()
mirror: block all operations on the target image during the job
qemu-iotests: fix -valgrind option for check
qemu-iotests: fix cleanup of background processes
qemu-io: Correct error messages
qemu-io: Check for trailing chars
qemu-io: fix cvtnum lval types
block: test 'blockdev-snapshot' using a file BDS as the overlay
block: Remove inner quotation marks in iotest 085
block: Disallow snapshots if the overlay doesn't support backing files
throttle: Use bs->throttle_state instead of bs->io_limits_enabled
throttle: Check for pending requests in throttle_group_unregister_bs()
qemu-img: add check for zero-length job len
qcow2: avoid misaligned 64bit bswap
qemu-iotests: Test the reopening of overlay_bs in 'block-commit'
commit: reopen overlay_bs before base
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The non-ccw machine for s390 (s390-virtio) is not very well maintained
and caused several issues in the past:
- aliases like virtio-blk did not work for s390
- virtio refactoring failed due to long standing bugs (e.g.see
commit cb927b8a "s390-virtio: Accommodate guests using virtqueues too early")
- some features like memory hotplug will cause trouble due to virtio storage
being above guest memory
- the boot loader bios no longer seems to work. the source code of that
loader is also no longer maintained
2.4 changed the default to the ccw machine, let's deprecate the old
machine for 2.5.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1446811645-25565-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Now that we can report errors in the realize function, let's replace
the fprintf's and hw_error's with error_setg.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the qom definitions of the ipl device into ipl.h, replace
"s390-ipl" by a proper type define, turn it into a TYPE_DEVICE
and remove the unneeded class definition.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For TYPE_DEVICE, the dc->reset() function is not called on system resets
yet. Until that is changed, we have to manually register a reset handler.
Let's provide qdev_reset_all_fn(), that can directly be used - just like
the reset handler that is already available for qbus.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Because of El Torito spec flaw boot image size needs to be verified.
Boot catalog entry size field has 16-bit width, and specifies size
in 512-byte units.
Thus, boot image size cannot exceed 32M.
We actually search for the file to get the file size.
This is done by scanning the ISO directory tree for the ISO block number
and reading the file size from the directory entry.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Boot entry is considered compatible if boot image is Linux kernel
with matching S390 Linux magic string.
Empty boot images with sector_count == 0 are considered broken.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch enables boot from media formatted according to
ISO-9660 and El Torito bootable CD specification.
We try to boot from device as ISO-9660 media when SCSI IPL failed.
The first boot catalog entry with bootable flag is used.
ISO-9660 media with default 2048-bytes sector size only is supported.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's always adjust the sector number to be read using the current
virtio block size value.
This prepares for the implementation of IPL from ISO-9660 media.
Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On hugetlbfs CMMA will not be useful as every ESSA instruction will trap.
So don't offer CMMA to guests with a hugepages backing.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
By replacing memory_region_init_ram with memory_region_allocate_system_memory
we gain goodies like mem-path backends. This will allow us to use hugetlbfs
once the kernel supports it.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We were missing some files, and some files should get an additional
entry to add the people actually looking after the code.
Reported-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
On s390x, each pci device has its own iommu, which is only properly
setup in qemu once the mpcifc instruction used to register the
translation table has been intercepted. Therefore, for a pci device that
is not configured or has not been initialized, proper translation is
neither required nor possible. Moreover, we may not have a host bridge
device ready yet.
This was exposed by a recent vfio change that triggers iommu translation
during the initialization of the vfio pci device. Let's do an early exit
in that case.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We keep the device's sense data in a byte array (following the
architecture), but the ecws are an array of 32 bit values. If we
just blindly copy the values, the sense data will change from
de-facto BE data to de-facto cpu-endian data, which means we end
up doing an incorrect conversion on LE hosts.
Let's just explicitly convert to cpu-endianness while assembling
the irb.
Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWQ2YyAAoJEDuxQgLoOKytN14IAKGIVOI1CfPNpWphrtc55Q0n
NEHxu9AeectWxbxHrVbhHqB7wEfIoPdymuiIg8WO3GPrEII2EUHJntBy0LyIxJUC
wj3waAsIs4bJPdkGBxFoqMkmXo+wKUFivh1aVx7pZwd0b3yjfgTZ117i3aHCBIEl
hvAoLdTp/tqRQcBvPu+/jnl2mSquf6IJg8Yhg409HFUrNcQ4bg2+gOQgrSuAKle8
1Jp73umA2509/FOB3J1QT0GZnX9+rbjoWxXbGyPucb26x6ep3KDEbMy5lMAv0+W2
Zoi4YfjPiPFTswkuNvqu2zpzJz1q7WNCP3V5/Yn/2q9KXNicTfsWQWs+T/hoByw=
=FKUB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-11-11' into queue-block
Block patches from 2015-10-26 until 2015-11-11.
# gpg: Signature made Wed Nov 11 17:00:50 2015 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2015-11-11:
iotests: Check for quorum support in test 139
qcow2: Fix qcow2_get_cluster_offset() for zero clusters
iotests: Add tests for the x-blockdev-del command
block: Add 'x-blockdev-del' QMP command
block: Add blk_get_refcnt()
mirror: block all operations on the target image during the job
qemu-iotests: fix -valgrind option for check
qemu-iotests: fix cleanup of background processes
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The quorum driver is always built in, but it is disabled during
run-time if there's no SHA256 support available (see commit e94867e).
This patch skips the quorum test in iotest 139 in that case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1447172891-20410-1-git-send-email-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When searching for contiguous zero clusters, we only need to check the
cluster type. Before this patch, an increasing offset (L2E_OFFSET_MASK)
was expected, so that the function never returned more than a single
zero cluster in practice. This patch fixes it to actually return as many
contiguous zero clusters as it can.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1446657384-5907-1-git-send-email-kwolf@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This command is still experimental, hence the name.
This is the companion to 'blockdev-add'. It allows deleting a
BlockBackend with its associated BlockDriverState tree, or a
BlockDriverState that is not attached to any backend.
In either case, the command fails if the reference count is greater
than 1 or the BlockDriverState has any parents.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 6cfc148c77aca1da942b094d811bfa3fcf7ac7bb.1446475331.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function returns the reference count of a given BlockBackend.
For convenience, it returns 0 if the BlockBackend pointer is NULL.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: dfdd8a17dbe3288842840636d2cfe5bb895abcb0.1446475331.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
There's nothing preventing the target image from being used by other
operations during the 'drive-mirror' job, so we should block them all
until the job is done.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 82b88fd04cde918a08a6f9a4ab85626d7fd7b502.1446475331.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu-io from a bash subshell,
in order to catch segfaults. This method is incompatible with the
current valgrind_qemu_io() bash function.
Move the valgrind usage into the exec subshell in _qemu_io_wrapper(),
while making sure the original return value is passed back to the
caller.
Update test output for tests 039, 061, and 137 as it looks for the
specific subshell command when the process is terminated.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0066fd85d26ca641a1c25135ff2479b7985701cf.1446232490.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu and qemu-nbd from a bash
subshell, in order to catch segfaults. Unfortunately, this means the
process PID cannot be captured via '$!'. We stopped killing qemu and
qemu-nbd processes, leaving a lot of orphaned, running qemu processes
after executing iotests.
Since the process is using exec in the subshell, the PID is the
same as the subshell PID.
Track these PIDs for cleanup using pidfiles in the $TEST_DIR. Only
track the qemu PID, however, if requested - not all usage requires
killing the process.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 9e4f958b3895b7259b98d845bb46f000ba362869.1446232490.git.jcody@redhat.com
[mreitz@redhat.com: Replaced '! -z "..."' by '-n "..."']
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make sure there's not trailing garbage, e.g.
"64k-whatever-i-want-here"
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
cvtnum() returns int64_t: we should not be storing this
result inside of an int.
In a few cases, we need an extra sprinkling of error handling
where we expect to pass this number on towards a function that
expects something smaller than int64_t.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test checks that it is not possible to create a snapshot if the
requested overlay node is a BDS which does not support backing images.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the inner quotation marks in all cases like this:
cmd=" ... "${variable}" ... "
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two ways to check for I/O limits in a BlockDriverState:
- bs->throttle_state: if this pointer is not NULL, it means that this
BDS is member of a throttling group, its ThrottleTimers structure
has been initialized and its I/O limits are ready to be applied.
- bs->io_limits_enabled: if true it means that the throttle_state
pointer is valid _and_ the limits are currently enabled.
The latter is used in several places to check whether a BDS has I/O
limits configured, but what it really checks is whether requests
are being throttled or not. For example, io_limits_enabled can be
temporarily set to false in cases like bdrv_read_unthrottled() without
otherwise touching the throtting configuration of that BDS.
This patch replaces bs->io_limits_enabled with bs->throttle_state in
all cases where what we really want to check is the existence of I/O
limits, not whether they are currently enabled or not.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
throttle_group_unregister_bs() removes a BlockDriverState from its
throttling group and destroys the timers. This means that there must
be no pending throttled requests at that point (because it would be
impossible to complete them), so the caller has to drain them first.
At the moment throttle_group_unregister_bs() is only called from
bdrv_io_limits_disable(), which already takes care of draining the
requests, so there's nothing to worry about, but this patch makes
this invariant explicit in the documentation and adds the relevant
assertions.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mirror job doesn't update its total length until
it has already started running, so we should translate
a zero-length job-len as meaning 0%.
Otherwise, we may get divide-by-zero faults.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we create a buffer directly on the stack by using 12 bytes, there's
no guarantee the 64bit value we want to swap will be aligned, which
could cause errors with undefined behavior.
Spotted with clang -fsanitize=undefined and observed in iotests 15, 26,
44, 115 and 121.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'block-commit' command needs the overlay image of 'top' to
be opened in read-write mode in order to update the backing file
string. If 'top' is not the active layer or its backing file then its
overlay needs to be reopened during the block job.
This is a test case for that scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'block-commit' needs write access to two different nodes of the chain:
- 'base', because that's where the data is written to.
- the overlay of 'top', because it needs to update the backing file
string to point to 'base' after the operation.
Both images have to be opened in read-write mode, and commit_start()
takes care of reopening them if necessary.
With the current implementation, however, when overlay_bs is reopened
in read-write mode it has the side effect of making 'base' read-only
again, eventually making 'block-commit' fail.
This needs to be fixed in bdrv_reopen(), but until we get to that it
can be worked around simply by swapping the order of base and
overlay_bs in the reopen queue.
In order to reproduce this bug, overlay_bs needs to be initially in
read-only mode. That is: the 'top' parameter of 'block-commit' cannot
be the active layer nor its immediate backing chain.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
