The test if the chardev frontend is connected in
kbd_put_keysym_console() is redundant, because the call
to qemu_chr_be_can_write() in kbd_send_chars() tests
the connected condition again.
Remove the redundant test whether the chardev frontend
is connected.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210916192239.18742-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
One of the two FIFO implementations QEMUFIFO and Fifo8 is
redundant. Replace QEMUFIFO with Fifo8.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210916192239.18742-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Any extra draw call for the same blob resource representing guest scanout
before the previous drawing is not finished can break synchronous draw
sequence. To prevent this, drawing is now done only once for each draw
submission (when draw_submitted == true).
v2:
- removed mutex
- updated commit msg
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20210924225105.24930-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a bugfix that stretches all the way back to January 2020,
where I initially introduced this problem and potential solutions.
A quick recap of the issue: QEMU did not sync up with the monitors
refresh rate causing the VM to render frames that were NOT displayed
to the user. That "fix" allowed QEMU to obtain the screen refreshrate
information from the system using GDK API's and was for GTK only.
Well, I'm back with the same issue again. But this time on Wayland.
And I did NOT realize there was YET another screen refresh rate
function, this time for Wayland specifically. Thankfully the fix was
simple and without much hassle.
Thanks,
Nikola
PS: It seems that my patch has gone missing from the mailing list,
hence I'm sending it again. Sorry for any inconveniences.
Signed-off-by: Nikola Pavlica <pavlica.nikola@gmail.com>
Message-Id: <20211024143110.704296-1-pavlica.nikola@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allows edk2 detect virtio-mmio devices and pcie ecam.
See comment in hw/i386/microvm-dt.c for more details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20211014193617.2475578-1-kraxel@redhat.com>
Volunteering as reviewer for some of the audio backends; namely
ALSA, CoreAudio and JACK.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <E1mMVca-0005ZJ-Lo@lizzy.crudebyte.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I've got some experience with the SDL library, so I can help
reviewing patches here.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211030062106.46024-1-huth@tuxfamily.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Move GPIO code out of qdev.c
- Move hotplug code out of qdev.c
- Restrict various files to sysemu
- Move SMP code out of machine.c
- Add SMP parsing unit tests
- Move dynamic sysbus device check earlier
-----BEGIN PGP SIGNATURE-----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=NzoC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/machine-20211101' into staging
Machine core patches
- Move GPIO code out of qdev.c
- Move hotplug code out of qdev.c
- Restrict various files to sysemu
- Move SMP code out of machine.c
- Add SMP parsing unit tests
- Move dynamic sysbus device check earlier
# gpg: Signature made Mon 01 Nov 2021 02:44:32 PM EDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* remotes/philmd/tags/machine-20211101:
machine: remove the done notifier for dynamic sysbus device type check
qdev-monitor: Check sysbus device type before creating it
machine: add device_type_is_dynamic_sysbus function
tests/unit: Add an unit test for smp parsing
hw/core/machine: Split out the smp parsing code
hw/core: Restrict hotplug to system emulation
hw/core: Extract hotplug-related functions to qdev-hotplug.c
hw/core: Declare meson source set
hw/core: Restrict sysemu specific files
machine: Move gpio code to hw/core/gpio.c
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we check sysbus device types during device creation, we
can remove the check in the machine init done notifier.
This was the only thing done by this notifier, so we remove the
whole sysbus_notifier structure of the MachineState.
Note: This notifier was checking all /peripheral and /peripheral-anon
sysbus devices. Now we only check those added by -device cli option or
device_add qmp command when handling the command/option. So if there
are some devices added in one of these containers manually (eg in
machine C code), these will not be checked anymore.
This use case does not seem to appear apart from
hw/xen/xen-legacy-backend.c (it uses qdev_set_id() and in this case,
not for a sysbus device, so it's ok).
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211029142258.484907-4-damien.hedde@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add an early check to test if the requested sysbus device type
is allowed by the current machine before creating the device. This
impacts both -device cli option and device_add qmp command.
Before this patch, the check was done well after the device has
been created (in a machine init done notifier). We can now report
the error right away.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211029142258.484907-3-damien.hedde@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Right now the allowance check for adding a sysbus device using
-device cli option (or device_add qmp command) is done well after
the device has been created. It is done during the machine init done
notifier: machine_init_notify() in hw/core/machine.c
This new function will allow us to do the check at the right time and
issue an error if it fails.
Also make device_is_dynamic_sysbus() use the new function.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211029142258.484907-2-damien.hedde@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now that we have a generic parser smp_parse(), let's add an unit
test for the code. All possible valid/invalid SMP configurations
that the user can specify are covered.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211026034659.22040-3-wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <bfed7144-af86-7098-e7a6-731ff13c2cf7@huawei.com>
[PMD: Squashed format string fixup from Yanan Wang]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to introduce an unit test for the parser smp_parse()
in hw/core/machine.c, but now machine.c is only built in softmmu.
In order to solve the build dependency on the smp parsing code and
avoid building unrelated stuff for the unit tests, move the tested
code from machine.c into a separate file, i.e., machine-smp.c and
build it in common field.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211026034659.22040-2-wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Restrict hotplug to system emulation, add stubs for the other uses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-5-philmd@redhat.com>
As we want to be able to conditionally add files to the hw/core
file list, use a source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-3-philmd@redhat.com>
All these files don't make sense for tools and user emulation,
restrict them to system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-2-philmd@redhat.com>
Only softmmu code uses gpio, so move gpio code from qdev.c to
gpio.c and compile it only on softmmu mode.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190425200051.19906-2-ehabkost@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Swap out the synchronous QEMUMonitorProtocol from qemu.qmp with the sync
wrapper from qemu.aqmp instead.
Add an escape hatch in the form of the environment variable
QEMU_PYTHON_LEGACY_QMP which allows you to cajole QEMUMachine into using
the old implementation, proving that both implementations work
concurrently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is a wrapper around the async QMPClient that mimics the old,
synchronous QEMUMonitorProtocol class. It is designed to be
interchangeable with the old implementation.
It does not, however, attempt to mimic Exception compatibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Wait for the destination VM to close itself instead of racing to shut it
down first, which produces different error log messages from AQMP
depending on precisely when we tried to shut it down.
(For example: We may try to issue 'quit' immediately prior to the target
VM closing its QMP socket, which will cause an ECONNRESET error to be
logged. Waiting for the VM to exit itself avoids the race on shutdown
behavior.)
Reported-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
AQMP likes to be very chatty about errors it encounters. In general,
this is good because it allows us to get good diagnostic information for
otherwise complex async failures.
For example, during a failed QMP connection attempt, we might see:
+ERROR:qemu.aqmp.qmp_client.qemub-2536319:Negotiation failed: EOFError
+ERROR:qemu.aqmp.qmp_client.qemub-2536319:Failed to establish session: EOFError
This might be nice in iotests output, because failure scenarios
involving the new QMP library will be spelled out plainly in the output
diffs.
For tests that are intentionally causing this scenario though, filtering
that log output could be a hassle. For now, add a context manager that
simply lets us toggle this output off during a critical region.
(Additionally, a forthcoming patch allows the use of either legacy or
async QMP to be toggled with an environment variable. In this
circumstance, we can't amend the iotest output to just always expect the
error message, either. Just suppress it for now. More rigorous log
filtering can be investigated later if/when it is deemed safe to
permanently replace the legacy QMP library.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20211026175612.4127598-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(But continue to support the old ones for now, too.)
There are very few cases of any user of QEMUMachine or a subclass
thereof relying on a QMP Exception type. If you'd like to check for
yourself, you want to grep for all of the derivatives of QMPError,
excluding 'AQMPError' and its derivatives. That'd be these:
- QMPError
- QMPConnectError
- QMPCapabilitiesError
- QMPTimeoutError
- QMPProtocolError
- QMPResponseError
- QMPBadPortError
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20211026175612.4127598-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The scary message interferes with the iotests output. Coincidentally, if
iotests works by removing this, then it's good evidence that we don't
really need to scare people away from using it.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
To use the AQMP backend, Machine just needs to be a little more diligent
about what happens when closing a QMP connection. The operation is no
longer a freebie in the async world; it may return errors encountered in
the async bottom half on incoming message receipt, etc.
(AQMP's disconnect, ultimately, serves as the quiescence point where all
async contexts are gathered together, and any final errors reported at
that point.)
Because async QMP continues to check for messages asynchronously, it's
almost certainly likely that the loop will have exited due to EOF after
issuing the last 'quit' command. That error will ultimately be bubbled
up when attempting to close the QMP connection. The manager class here
then is free to discard it -- if it was expected.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20211026175612.4127598-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If we spy on the QMP commands instead, we don't need callers to remember
to pass it. Seems like a fair trade-off.
The one slightly weird bit is overloading this instance variable for
wait(), where we use it to mean "don't issue the qmp 'quit'
command". This means that wait() will "fail" if the QEMU process does
not terminate of its own accord.
In most cases, we probably did already actually issue quit -- some
iotests do this -- but in some others, we may be waiting for QEMU to
terminate for some other reason, such as a test wherein we tell the
guest (directly) to shut down.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20211026175612.4127598-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Run mypy and pylint on the iotests files directly from the Python CI
test infrastructure. This ensures that any accidental breakages to the
qemu.[qmp|aqmp|machine|utils] packages will be caught by that test
suite.
It also ensures that these linters are run with well-known versions and
test against a wide variety of python versions, which helps to find
accidental cross-version python compatibility issues.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This one is insidious: if you write an import as "from {namespace}
import {subpackage}" as mirror-top-perms (now) does, mypy will fail on
every-other invocation *if* the package being imported is a typed,
installed, namespace-scoped package.
Upsettingly, that's exactly what 'qemu.[aqmp|qmp|machine]' et al are in
the context of Python CI tests.
Now, I could just edit mirror-top-perms to avoid this invocation, but
since I tripped on a landmine, I might as well head it off at the pass
and make sure nobody else trips on that same landmine.
It seems to have something to do with the order in which files are
checked as well, meaning the random order in which set(os.listdir())
produces the list of files to test will cause problems intermittently
and not just strictly "every other run".
This will be fixed in mypy >= 0.920, which is not released yet. The
workaround for now is to disable incremental checking, which avoids the
issue.
Note: This workaround is not applied when running iotest 297 directly,
because the bug does not surface there! Given the nature of CI jobs not
starting with any stale cache to begin with, this really only has a
half-second impact on manual runs of the Python test suite when executed
directly by a developer on their local machine. The workaround may be
removed when the Python package requirements can stipulate mypy 0.920 or
higher, which can happen as soon as it is released. (Barring any
unforseen compatibility issues that 0.920 may bring with it.)
See also:
https://github.com/python/mypy/issues/11010https://github.com/python/mypy/issues/9852
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We need at least a tiny little shim here to join test file discovery
with test invocation. This logic could conceivably be hosted somewhere
in python/, but I felt it was strictly the least-rude thing to keep the
test logic here in iotests/, even if this small function isn't itself an
iotest.
Note that we don't actually even need the executable bit here, we'll be
relying on the ability to run this module as a script using Python CLI
arguments. No chance it gets misunderstood as an actual iotest that way.
(It's named, not in tests/, doesn't have the execute bit, and doesn't
have an execution shebang.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Now, 297 is just the iotests-specific incantations and linters.py is as
minimal as I can think to make it. The only remaining element in here
that ought to be configuration and not code is the list of skip files,
but they're still numerous enough that repeating them for mypy and
pylint configurations both would be ... a hassle.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Take iotest 297's main() test function and split it into two sub-cases
that can be skipped individually. We can also drop custom environment
setup from the pylint test as it isn't needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As mentioned in 'iotests/297: Don't rely on distro-specific linter
binaries', these checks are overly strict. Update them to be in-line
with how we actually invoke the linters themselves.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of using a process return code as the python function return
value (or just not returning anything at all), allow run_linter() to
raise an exception instead.
The responsibility for printing output on error shifts from the function
itself to the caller, who will know best how to present/format that
information. (Also, "suppress_output" is now a lot more accurate of a
parameter name.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
There's virtually nothing special here anymore; we can combine these
into a single, rather generic function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move environment setup into main(), and split the actual linter
execution into run_pylint and run_mypy, respectively.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
'pylint-3' is another Fedora-ism. Use "python3 -m pylint" or "python3 -m
mypy" to access these scripts instead. This style of invocation will
prefer the "correct" tool when run in a virtual environment.
Note that we still check for "pylint-3" before the test begins -- this
check is now "overly strict", but shouldn't cause anything that was
already running correctly to start failing. This is addressed by a
commit later in this series;
'iotests/297: update tool availability checks'.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of running "run_linters" directly, create a main() function that
will be responsible for environment setup, leaving run_linters()
responsible only for execution of the linters.
(That environment setup will be moved over in forthcoming commits.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Split out file discovery into its own method to begin separating out
configuration/setup and test execution.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
More separation of code and configuration.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move --score=n and --notes=XXX,FIXME into pylintrc. This pulls
configuration out of code, which I think is probably a good thing in
general.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211019144918.3159078-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Patches from Zoltan:
- Various clean up to align the code style with the rest of the code base
- QOM'ify the SH_SERIAL device
- Modify few memory region size to better match the hardware manual
-----BEGIN PGP SIGNATURE-----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=ktI+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/renesas-20211030' into staging
Renesas SH-4 patches queue
Patches from Zoltan:
- Various clean up to align the code style with the rest of the code base
- QOM'ify the SH_SERIAL device
- Modify few memory region size to better match the hardware manual
# gpg: Signature made Sat 30 Oct 2021 10:05:03 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* remotes/philmd/tags/renesas-20211030: (30 commits)
hw/timer/sh_timer: Remove use of hw_error
hw/timer/sh_timer: Fix timer memory region size
hw/timer/sh_timer: Do not wrap lines that are not too long
hw/timer/sh_timer: Rename sh_timer_state to SHTimerState
hw/intc/sh_intc: Remove unneeded local variable initialisers
hw/intc/sh_intc: Simplify allocating sources array
hw/intc/sh_intc: Avoid using continue in loops
hw/intc/sh_intc: Replace abort() with g_assert_not_reached()
hw/intc/sh_intc: Inline and drop sh_intc_source() function
hw/intc/sh_intc: Use array index instead of pointer arithmetics
hw/intc/sh_intc: Remove excessive parenthesis
hw/intc/sh_intc: Move sh_intc_register() closer to its only user
hw/intc/sh_intc: Drop another useless macro
hw/intc/sh_intc: Rename iomem region
hw/intc/sh_intc: Turn some defines into an enum
hw/intc/sh_intc: Use existing macro instead of local one
hw/char/sh_serial: Add device id to trace output
hw/char/sh_serial: QOM-ify
hw/char/sh_serial: Split off sh_serial_reset() from sh_serial_init()
hw/char/sh_serial: Embed QEMUTimer in state struct
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hw_error function calls abort and is not meant to be used by
devices. Use qemu_log_mask instead to log and ignore invalid accesses.
Also fix format strings to allow dropping type casts of hwaddr and use
__func__ instead of hard coding function name in the message which
were wrong in two cases.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <f818dc3dd2ac8c3b3d53067f316a716d7f9683d8.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The timer unit only has registers that fit in a region 0x30 bytes
long. No need to have the timer region larger than that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b1cd196cf1395a602c7a08a4f858e69e50c446a1.1635550060.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It's more readable to keep things on one line if it fits the length limit.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <97bc2a38991f33fd0c8cc2e4d0a3a29b20c47d1f.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to coding style types should be camel case, also remove
unneded casts from void *.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <d9a9d160c1153a583397e366ab06477f5a31c507.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sh_intc_locate function will either init these or not return so no
need to initialise them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <15e04aa665c68ab5df47bbf505346d413be2fc1c.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use g_new0 instead of g_malloc0 and avoid some unneeded temporary
variable assignments.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <72efc4f2c4ff8b96848d03dca08e4541ee4076f6.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of if !expr continue else do something it is more straight
forward to say if expr then do something, especially if the action is
just a few lines. Remove such uses of continue to make the code easier
to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <0efaa5e7a1a3ee11f82b3bb1942c287576c67f8b.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
