This patch implements XML target description support for X86 and X86-64
architectures in the GDB stub, as the way with ARM and PowerPC:
- gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target
description files, these files are picked from GDB source code.
- configure: Define gdb_xml_files for X86 targets.
- target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add
XML awareness for this architecture, modify the gdb_num_core_regs to
fit the registers number defined in each XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit "c53eeaf75a04 configure: eliminate Python dependency for
--help", configure --help fails to produce the list of available trace
backends if invoked out-of-tree. It also spits the following error:
grep: scripts/tracetool/backend/*.py: No such file or directory
This patch simply adds the missing $source_path to fix it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-id: 149321376763.7874.12797658801011614451.stgit@bahia
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A command that will list all currently logged in users, and the time
since when they are logged in.
Examples:
virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490622289.903835,"user":"root"}]}
virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490351044.670552,"domain":"LADIDA",
"user":"Administrator"}]}
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
* make g_hash_table_contains compat func inline to avoid
unused warnings
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OfeB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging
Xen 2017/04/21 + fix
# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg: using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
move xen-mapcache.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/
move xen-common.c to hw/xen/
add xen-9p-backend to MAINTAINERS under Xen
xen/9pfs: build and register Xen 9pfs backend
xen/9pfs: send responses back to the frontend
xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
xen/9pfs: receive requests from the frontend
xen/9pfs: connect to the frontend
xen/9pfs: introduce Xen 9pfs backend
9p: introduce a type for the 9p header
xen: import ring.h from xen
configure: use pkg-config for obtaining xen version
xen: additionally restrict xenforeignmemory operations
xen: use libxendevice model to restrict operations
xen: use 5 digit xen versions
xen: use libxendevicemodel when available
configure: detect presence of libxendevicemodel
xen: create wrappers for all other uses of xc_hvm_XXX() functions
xen: rename xen_modified_memory() to xen_hvm_modified_memory()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git
Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'
Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0
Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'
[Jeff: Modified trace-events with the correct string formatting]
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
Instead of trying to guess the Xen version to use by compiling various
test programs first just ask the system via pkg-config. Only if it
can't return the version fall back to the test program scheme.
If configure is being called with dedicated flags for the Xen libraries
use those instead of the pkg-config output. This will avoid breaking
an in-tree Xen build of an old Xen version while a new Xen version is
installed on the build machine: pkg-config would pick up the installed
Xen config files as the Xen tree wouldn't contain any of them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Today qemu is using e.g. the value 480 for Xen version 4.8.0. As some
Xen version tests are using ">" relations this scheme will lead to
problems when Xen version 4.10.0 is being reached.
Instead of the 3 digit schem use a 5 digit scheme (e.g. 40800 for
version 4.8.0).
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds code in configure to set CONFIG_XEN_CTRL_INTERFACE_VERSION
to a new value of 490 if libxendevicemodel is present in the build
environment.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The ./configure script should produce --help output even if Python is
not installed.
Listing trace backends is simple: show the names of all Python modules
in scripts/tracetool/backend/ whose source code contains 'PUBLIC =
True'.
Perform the backend enumeration in shell instead of Python so that we
can move the Python check until after ./configure --help.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170328134418.3426-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the 2.7 release we stated in the ChangeLog that the
minimum glib version for Windows hosts was 2.30, but we
didn't update configure to enforce this because we were
very close to the release at the point where we noticed
the issue, and it only affected building the test suite.
We then forgot that we needed to do it. Fix the omission.
(The reason for the 2.30 requirement is use of
g_dir_make_tmp() -- our fallback implementation uses
mkdtemp(), which isn't available on Windows.)
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1491224655-5776-1-git-send-email-peter.maydell@linaro.org
Thanks to John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
and the Debian Project, we now have access to a SPARC Linux
system we can use for build testing. Move SPARC back into
the "supported" list.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490698718-23762-1-git-send-email-peter.maydell@linaro.org
Attempting to compile qemu-ga statically as follows for Windows causes
the following error:
Compilation:
./configure --disable-docs --target-list=x86_64-softmmu \
--cross-prefix=x86_64-w64-mingw32- --static \
--enable-guest-agent-msi --with-vss-sdk=/path/to/VSSSDK72
make -j8 qemu-ga
Error:
path/to/qemu/stubs/error-printf.c:7: undefined reference to `__imp_g_test_config_vars'
collect2: error: ld returned 1 exit status
Makefile:444: recipe for target 'qemu-ga.exe' failed
make: *** [qemu-ga.exe] Error 1
This is caused by a bug in the pkg-config file for glib as it doesn't define
GLIB_STATIC_COMPILATION for pkg-config --static.
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The change in commit 898be3e041 which made completely
unrecognized OSes cause an error_exit "Unsupported host OS"
has some unfortunate unintended effects:
* if you run 'configure --help' on an unsupported host OS
(eg if intending to use it as a build machine for a
cross compile to a supported host) then the message
is printed instead of --help
* if the C compiler doesn't work or is missing (eg if
you passed an incorrect --cross-prefix by mistake)
the message is printed instead of the more useful
'compiler does not exist or does not work' message
Fix this by postponing the error_exit in this situation
until later, when we have already identified the more
useful cases for this.
The long term fix for this would be to move handling
of --help much further up in the configure script,
and make its output not dependent on checks that configure
runs. However for 2.9 this would be too invasive.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Fix some cut-and-paste errors in the OS deprecation warning
pointed out by Thomas Huth.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1490119729-26206-1-git-send-email-peter.maydell@linaro.org
We plan to drop support in a future QEMU release for host OSes
and host architectures for which we have no test machine where
we can build and run tests. For the 2.9 release, make configure
print a warning if it is run on such a host, so that the user
has some warning of the plans and can volunteer to help us
maintain the port if they need it to continue to function.
This commit flags up as deprecated the CPU architectures:
* ia64
* sparc
* anything which we don't have a TCG port for
(and which was presumably using TCI)
and the OSes:
* GNU/kFreeBSD
* DragonFly BSD
* NetBSD
* OpenBSD
* Solaris
* AIX
* Haiku
It also makes entirely unrecognized host OS strings be
rejected rather than treated as if they were Linux (which
likely never worked).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490106717-9542-1-git-send-email-peter.maydell@linaro.org
... and drop OPENGL_CFLAGS from Makefiles.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1490079888-29029-1-git-send-email-kraxel@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sdl is probed before audio, so we can simply look at $sdl so see
whenever we have support or not. Throw an error in case sdl audio
is requested without sdl being available.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1490000743-3615-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cygwin target is really compiling for native Win32 with -mno-cygwin.
Except, GCC 4.7.0 has finally removed the long deprecated -mno-cygwin
option, and that happened about five years ago.
Let it rest in peace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20170317160811.28370-1-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition of the major() and minor() macros are moving within glibc to
<sys/sysmacros.h>. Include this header when it is available to avoid the
following sorts of build-stopping messages:
qga/commands-posix.c: In function ‘dev_major_minor’:
qga/commands-posix.c:656:13: error: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "major", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"major", you should undefine it after including <sys/types.h>. [-Werror]
*devmajor = major(st.st_rdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~
qga/commands-posix.c:657:13: error: In the GNU C Library, "minor" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "minor", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"minor", you should undefine it after including <sys/types.h>. [-Werror]
*devminor = minor(st.st_rdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~
The additional include allows the build to complete on Fedora 26 (Rawhide)
with glibc version 2.24.90.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The driver has failed to build since commit da34e65, in qemu 2.6,
due to a missing include of qapi/error.h for error_setg().
Since no one has complained in three releases, it is easier to
remove the dead code than to keep it around, especially since it
is not being built by default and therefore prone to bitrot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=xOs6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170224-2' into staging
MIPS patches 2017-02-24-2
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
# gpg: Signature made Fri 24 Feb 2017 11:43:45 GMT
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170224-2:
hw/mips: MIPS Boston board support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly.
changed default memory size into 1G due to make check failure
on 32-bit hosts]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:
- The ARM translate.c/translate-64.c have been converted to
- use MTTCG safe atomic primitives
- emit the appropriate barrier ops
- The ARM machine has been updated to
- hold the BQL when modifying shared cross-vCPU state
- defer powerctl changes to async safe work
All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This reverts commit d3473e147a.
This commit creates a board which defaults to having 2GB of RAM.
Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM,
and so 'make check' fails. I missed this during testing of the
merge, unfortunately. Luckily the offending commit is the last
one in the merge request, so we can just revert it for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
In order to obtain fdt_first_subnode & fdt_next_subnode symbols from
libfdt for use by a later patch, bump the requirement for dtc to v1.4.2
& the submodule to that same version.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
In
commit ba78db44f6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 25 16:14:10 2017 +0000
make: move top level dir to end of include search path
The dir $(BUILD_DIR)/$(@D) was added to the include
path. This would sometimes point to a non-existant
directory, if the sub-dir in question did not contain
any target-independant files (eg tcg/). To deal with
this the rules.mak attempted to create the directory.
While this was succesful, it also caused accidental
creation of files in the parent of the build dir.
e.g. when building common source files into target
specific output files.
Rather than trying to workaround this, just revert
the code that attempted to mkdir the missing include
directories. Instead just turn off the compiler warning
in question as the missing dir is expected & harmless
in general.
NB: you can clean up a build directory parent that has
been filled with empty directories by commit ba78db44f6
using this GNU find command in that parent directory:
find audio backends block chardev crypto disas fsdev hw io linux-user \
migration nbd net qapi qom replay slirp target ui util \
-type d -empty -delete
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Alberto Garcia <berto@igalia.com>
[PMM: added note about how to clean up a polluted directory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add remaining bits of the Altera NiosII R1 support into qemu, which
is documentation, MAINTAINERS file entry, configure bits, arch_init
and configuration files for both linux-user (userland binaries) and
softmmu (hardware emulation).
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-8-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is just about the minimum required to enable compilation
without actually executing any instructions. This contains the
HPPACPU structure and the required callbacks, the gdbstub, the
basic translation loop, and a translate_one function that always
results in an illegal instruction.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This reverts commit 7ad9339e37.
The error "Failed to execute helper program (No such file or directory)"
is due to broken glib installation, missing windows gspawn helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170104205722.26492-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the Intel HAX is kernel-based hardware acceleration module for
Windows (similar to KVM on Linux).
Based on the "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org>
[Drop hax_populate_ram stub. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generate and install the man, txt and html versions of QAPI
documentation (generate and install qemu-doc.txt too).
Add it also to optional pdf/info targets.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These files deal with the file protocol, not the raw format (the
file protocol is often used with other formats, and the raw
format is not forced to use the file protocol). Rename things
to make it a bit easier to follow.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* rules.mak speedup and cleanups from myself and Marc-Adnré
* multiboot command line fix from Vlad
* SCSI fixes from myself
* small qemu-timer speedup from myself
* x86 debugging improvements from Doug
* configurable Q35 devices from Chao
* x86 5-level paging support from Kirill
* x86 SHA_NI support for KVM from Yi Sun
* improved kvmclock migration logic from Marcelo
* bugfixes and doc fixes from others
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJYW+q5FBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
H7cH/i5SpYY96aMGqK/QOIL9GfLPOeNayUFyf4Mnt/9B/85l9vAIf8uVARDpO7Mw
AiVZcdIj/PAFJ5jrLWA8qvBBaWS69Cfq1/hQfsWWlG3FcXU1Lzc/I76d8pAZC+9P
BZ/YWX3ZO6aOcT7XqzsBINoofyyjwUFNeYaoWwrUsWJVFG3987cbIMmnNp9pqxhZ
4pcMpycnWQJULP+P+AT6YjJaX7G017bXlrsc+iDh1dBe3Ah/Lp0Wy73YahAI5Dq2
3MT8bECjSIRQuT5xCyAsfN3latUVoAZrkJH3dApqg5RbqKWIkdpfQ0gIbGX8l3P5
DU5NRQcTujCPl8VdsNnrr796HV0=
=VhCX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* core support for MemoryRegionCache from myself
* rules.mak speedup and cleanups from myself and Marc-Adnré
* multiboot command line fix from Vlad
* SCSI fixes from myself
* small qemu-timer speedup from myself
* x86 debugging improvements from Doug
* configurable Q35 devices from Chao
* x86 5-level paging support from Kirill
* x86 SHA_NI support for KVM from Yi Sun
* improved kvmclock migration logic from Marcelo
* bugfixes and doc fixes from others
# gpg: Signature made Thu 22 Dec 2016 15:01:13 GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (25 commits)
x86: implement la57 paging mode
target-i386: Fix eflags.TF/#DB handling of syscall/sysret insns
kvmclock: reduce kvmclock difference on migration
kvm: sync linux headers
scsi-disk: fix VERIFY for scsi-block
hw/block/pflash_cfi*.c: fix confusing assert fail message
multiboot: copy the cmdline verbatim, unescape module strings
x86: Fix x86_64 'g' packet response to gdb from 32-bit mode.
pc: make pit configurable
pc: make sata configurable
pc: make smbus configurable
target-i386: Add Intel SHA_NI instruction support.
block: drop remaining legacy aio functions in comment
main-loop: update comment for qemu_mutex_lock/unlock_iothread
timer: fix misleading comment in timer.h
qemu-timer: check active_timers outside lock/event
virtio-scsi: introduce virtio_scsi_acquire/release
build-sys: remove libtool left-over
rules.mak: add more rules to avoid chaining
rules.mak: speedup save-vars load-vars
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Libtool support was removed in commit e999ee4434, there is a few
left-over.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161108070513.30274-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This item will be used for support libcrypt-backed HMAC algorithms.
Support for hmac has been added in Libgcrypt 1.6.0, but we cannot
use pkg-config to get libcrypt's version. However we can make a
in configure to know whether current libcrypt support hmac.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:
/usr/bin/ld: -r and -pie may not be used together
You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed. However, clang
does not know about -r, so try -Wl,-r first.
[This is a fix for commit c96f0ee6a6
("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is
default") which mostly worked but broke the ./configure --enable-modules
build with clang.
--Stefan]
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161129153720.29747-1-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The detection program needs to be linked with -ldl to build succesfully
with recent versions of LTTng-UST.
We also need to add -ldl to the libs required to build the LTTng-UST
backend (lttng_ust_libs).
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Message-id: 1480348337-24271-1-git-send-email-francis.deslauriers@efficios.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include sys/user.h for declaration of 'struct kinfo_proc'.
Add -lutil to qemu-ga link for kinfo_getproc.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1479778365-11315-1-git-send-email-emaste@freebsd.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On systems which do not provide ncursesw.pc and whose /usr/include/curses.h
does not include wide support, we should not only try with no -I, i.e.
/usr/include, but also with -I/usr/include/ncursesw.
To properly detect for wide support with and without -Werror, we need to
check for the presence of e.g. the WACS_DEGREE macro.
We also want to stop at the first curses_inc_list configuration which works,
and make sure to set IFS to : at each new loop.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 20161109102752.13255-1-samuel.thibault@ens-lyon.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the AF_VSOCK address family so that qemu-ga will be able to use
virtio-vsock.
The AF_VSOCK address family uses <cid, port> address tuples. The cid is
the unique identifier comparable to an IP address. AF_VSOCK does not
use name resolution so it's easy to convert between struct sockaddr_vm
and strings.
This patch defines a VsockSocketAddress instead of trying to piggy-back
on InetSocketAddress. This is cleaner in the long run since it avoids
lots of IPv4 vs IPv6 vs vsock special casing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* treat trailing commas as garbage when parsing (Eric Blake)
* add configure check instead of checking AF_VSOCK directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
configure --enable-colo/--disable-colo to switch COLO
support on/off.
COLO feature doesn't depend on any other external libraries,
So here it is reasonable to enable COLO by default, to
avoid re-compile QEMU if users want to use this capability.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
