hw/misc/tz-mpc.c: Implement the Arm TrustZone Memory Protection Controller
Implement the Arm TrustZone Memory Protection Controller, which sits in front of RAM and allows secure software to configure it to either pass through or reject transactions. We implement the MPC as a QEMU IOMMU, which will direct transactions either through to the devices and memory behind it or to a special "never works" AddressSpace if they are blocked. This initial commit implements the skeleton of the device: * it always permits accesses * it doesn't implement most of the registers * it doesn't implement the interrupt or other behaviour for blocked transactions Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180620132032.28865-2-peter.maydell@linaro.org
This commit is contained in:
Peter Maydell
parent
eb24d4d38e
commit
344f4b1581
@ -457,6 +457,8 @@ F: hw/char/cmsdk-apb-uart.c
|
|||||||
F: include/hw/char/cmsdk-apb-uart.h
|
F: include/hw/char/cmsdk-apb-uart.h
|
||||||
F: hw/misc/tz-ppc.c
|
F: hw/misc/tz-ppc.c
|
||||||
F: include/hw/misc/tz-ppc.h
|
F: include/hw/misc/tz-ppc.h
|
||||||
|
F: hw/misc/tz-mpc.c
|
||||||
|
F: include/hw/misc/tz-mpc.h
|
||||||
|
|
||||||
ARM cores
|
ARM cores
|
||||||
M: Peter Maydell <peter.maydell@linaro.org>
|
M: Peter Maydell <peter.maydell@linaro.org>
|
||||||
|
|||||||
@ -108,6 +108,7 @@ CONFIG_CMSDK_APB_UART=y
|
|||||||
CONFIG_MPS2_FPGAIO=y
|
CONFIG_MPS2_FPGAIO=y
|
||||||
CONFIG_MPS2_SCC=y
|
CONFIG_MPS2_SCC=y
|
||||||
|
|
||||||
|
CONFIG_TZ_MPC=y
|
||||||
CONFIG_TZ_PPC=y
|
CONFIG_TZ_PPC=y
|
||||||
CONFIG_IOTKIT=y
|
CONFIG_IOTKIT=y
|
||||||
CONFIG_IOTKIT_SECCTL=y
|
CONFIG_IOTKIT_SECCTL=y
|
||||||
|
|||||||
@ -62,6 +62,7 @@ obj-$(CONFIG_MIPS_ITU) += mips_itu.o
|
|||||||
obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o
|
obj-$(CONFIG_MPS2_FPGAIO) += mps2-fpgaio.o
|
||||||
obj-$(CONFIG_MPS2_SCC) += mps2-scc.o
|
obj-$(CONFIG_MPS2_SCC) += mps2-scc.o
|
||||||
|
|
||||||
|
obj-$(CONFIG_TZ_MPC) += tz-mpc.o
|
||||||
obj-$(CONFIG_TZ_PPC) += tz-ppc.o
|
obj-$(CONFIG_TZ_PPC) += tz-ppc.o
|
||||||
obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o
|
obj-$(CONFIG_IOTKIT_SECCTL) += iotkit-secctl.o
|
||||||
|
|
||||||
|
|||||||
@ -84,6 +84,13 @@ mos6522_set_sr_int(void) "set sr_int"
|
|||||||
mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64
|
mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64
|
||||||
mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x"
|
mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x"
|
||||||
|
|
||||||
|
# hw/misc/tz-mpc.c
|
||||||
|
tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u"
|
||||||
|
tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs write: offset 0x%x data 0x%" PRIx64 " size %u"
|
||||||
|
tz_mpc_mem_blocked_read(uint64_t addr, unsigned size, bool secure) "TZ MPC blocked read: offset 0x%" PRIx64 " size %u secure %d"
|
||||||
|
tz_mpc_mem_blocked_write(uint64_t addr, uint64_t data, unsigned size, bool secure) "TZ MPC blocked write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
|
||||||
|
tz_mpc_translate(uint64_t addr, int flags, const char *idx, const char *res) "TZ MPC translate: addr 0x%" PRIx64 " flags 0x%x iommu_idx %s: %s"
|
||||||
|
|
||||||
# hw/misc/tz-ppc.c
|
# hw/misc/tz-ppc.c
|
||||||
tz_ppc_reset(void) "TZ PPC: reset"
|
tz_ppc_reset(void) "TZ PPC: reset"
|
||||||
tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d"
|
tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d"
|
||||||
|
|||||||
399
hw/misc/tz-mpc.c
Normal file
399
hw/misc/tz-mpc.c
Normal file
@ -0,0 +1,399 @@
|
|||||||
|
/*
|
||||||
|
* ARM AHB5 TrustZone Memory Protection Controller emulation
|
||||||
|
*
|
||||||
|
* Copyright (c) 2018 Linaro Limited
|
||||||
|
* Written by Peter Maydell
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "qemu/osdep.h"
|
||||||
|
#include "qemu/log.h"
|
||||||
|
#include "qapi/error.h"
|
||||||
|
#include "trace.h"
|
||||||
|
#include "hw/sysbus.h"
|
||||||
|
#include "hw/registerfields.h"
|
||||||
|
#include "hw/misc/tz-mpc.h"
|
||||||
|
|
||||||
|
/* Our IOMMU has two IOMMU indexes, one for secure transactions and one for
|
||||||
|
* non-secure transactions.
|
||||||
|
*/
|
||||||
|
enum {
|
||||||
|
IOMMU_IDX_S,
|
||||||
|
IOMMU_IDX_NS,
|
||||||
|
IOMMU_NUM_INDEXES,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Config registers */
|
||||||
|
REG32(CTRL, 0x00)
|
||||||
|
REG32(BLK_MAX, 0x10)
|
||||||
|
REG32(BLK_CFG, 0x14)
|
||||||
|
REG32(BLK_IDX, 0x18)
|
||||||
|
REG32(BLK_LUT, 0x1c)
|
||||||
|
REG32(INT_STAT, 0x20)
|
||||||
|
REG32(INT_CLEAR, 0x24)
|
||||||
|
REG32(INT_EN, 0x28)
|
||||||
|
REG32(INT_INFO1, 0x2c)
|
||||||
|
REG32(INT_INFO2, 0x30)
|
||||||
|
REG32(INT_SET, 0x34)
|
||||||
|
REG32(PIDR4, 0xfd0)
|
||||||
|
REG32(PIDR5, 0xfd4)
|
||||||
|
REG32(PIDR6, 0xfd8)
|
||||||
|
REG32(PIDR7, 0xfdc)
|
||||||
|
REG32(PIDR0, 0xfe0)
|
||||||
|
REG32(PIDR1, 0xfe4)
|
||||||
|
REG32(PIDR2, 0xfe8)
|
||||||
|
REG32(PIDR3, 0xfec)
|
||||||
|
REG32(CIDR0, 0xff0)
|
||||||
|
REG32(CIDR1, 0xff4)
|
||||||
|
REG32(CIDR2, 0xff8)
|
||||||
|
REG32(CIDR3, 0xffc)
|
||||||
|
|
||||||
|
static const uint8_t tz_mpc_idregs[] = {
|
||||||
|
0x04, 0x00, 0x00, 0x00,
|
||||||
|
0x60, 0xb8, 0x1b, 0x00,
|
||||||
|
0x0d, 0xf0, 0x05, 0xb1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr,
|
||||||
|
uint64_t *pdata,
|
||||||
|
unsigned size, MemTxAttrs attrs)
|
||||||
|
{
|
||||||
|
uint64_t r;
|
||||||
|
uint32_t offset = addr & ~0x3;
|
||||||
|
|
||||||
|
if (!attrs.secure && offset < A_PIDR4) {
|
||||||
|
/* NS accesses can only see the ID registers */
|
||||||
|
qemu_log_mask(LOG_GUEST_ERROR,
|
||||||
|
"TZ MPC register read: NS access to offset 0x%x\n",
|
||||||
|
offset);
|
||||||
|
r = 0;
|
||||||
|
goto read_out;
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (offset) {
|
||||||
|
case A_PIDR4:
|
||||||
|
case A_PIDR5:
|
||||||
|
case A_PIDR6:
|
||||||
|
case A_PIDR7:
|
||||||
|
case A_PIDR0:
|
||||||
|
case A_PIDR1:
|
||||||
|
case A_PIDR2:
|
||||||
|
case A_PIDR3:
|
||||||
|
case A_CIDR0:
|
||||||
|
case A_CIDR1:
|
||||||
|
case A_CIDR2:
|
||||||
|
case A_CIDR3:
|
||||||
|
r = tz_mpc_idregs[(offset - A_PIDR4) / 4];
|
||||||
|
break;
|
||||||
|
case A_INT_CLEAR:
|
||||||
|
case A_INT_SET:
|
||||||
|
qemu_log_mask(LOG_GUEST_ERROR,
|
||||||
|
"TZ MPC register read: write-only offset 0x%x\n",
|
||||||
|
offset);
|
||||||
|
r = 0;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
qemu_log_mask(LOG_GUEST_ERROR,
|
||||||
|
"TZ MPC register read: bad offset 0x%x\n", offset);
|
||||||
|
r = 0;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (size != 4) {
|
||||||
|
/* None of our registers are read-sensitive (except BLK_LUT,
|
||||||
|
* which can special case the "size not 4" case), so just
|
||||||
|
* pull the right bytes out of the word read result.
|
||||||
|
*/
|
||||||
|
r = extract32(r, (addr & 3) * 8, size * 8);
|
||||||
|
}
|
||||||
|
|
||||||
|
read_out:
|
||||||
|
trace_tz_mpc_reg_read(addr, r, size);
|
||||||
|
*pdata = r;
|
||||||
|
return MEMTX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t value,
|
||||||
|
unsigned size, MemTxAttrs attrs)
|
||||||
|
{
|
||||||
|
uint32_t offset = addr & ~0x3;
|
||||||
|
|
||||||
|
trace_tz_mpc_reg_write(addr, value, size);
|
||||||
|
|
||||||
|
if (!attrs.secure && offset < A_PIDR4) {
|
||||||
|
/* NS accesses can only see the ID registers */
|
||||||
|
qemu_log_mask(LOG_GUEST_ERROR,
|
||||||
|
"TZ MPC register write: NS access to offset 0x%x\n",
|
||||||
|
offset);
|
||||||
|
return MEMTX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (size != 4) {
|
||||||
|
/* Expand the byte or halfword write to a full word size.
|
||||||
|
* In most cases we can do this with zeroes; the exceptions
|
||||||
|
* are CTRL, BLK_IDX and BLK_LUT.
|
||||||
|
*/
|
||||||
|
uint32_t oldval;
|
||||||
|
|
||||||
|
switch (offset) {
|
||||||
|
/* As we add support for registers which need expansions
|
||||||
|
* other than zeroes we'll fill in cases here.
|
||||||
|
*/
|
||||||
|
default:
|
||||||
|
oldval = 0;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
value = deposit32(oldval, (addr & 3) * 8, size * 8, value);
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (offset) {
|
||||||
|
case A_PIDR4:
|
||||||
|
case A_PIDR5:
|
||||||
|
case A_PIDR6:
|
||||||
|
case A_PIDR7:
|
||||||
|
case A_PIDR0:
|
||||||
|
case A_PIDR1:
|
||||||
|
case A_PIDR2:
|
||||||
|
case A_PIDR3:
|
||||||
|
case A_CIDR0:
|
||||||
|
case A_CIDR1:
|
||||||
|
case A_CIDR2:
|
||||||
|
case A_CIDR3:
|
||||||
|
qemu_log_mask(LOG_GUEST_ERROR,
|
||||||
|
"TZ MPC register write: read-only offset 0x%x\n", offset);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
qemu_log_mask(LOG_GUEST_ERROR,
|
||||||
|
"TZ MPC register write: bad offset 0x%x\n", offset);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return MEMTX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps tz_mpc_reg_ops = {
|
||||||
|
.read_with_attrs = tz_mpc_reg_read,
|
||||||
|
.write_with_attrs = tz_mpc_reg_write,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
.valid.min_access_size = 1,
|
||||||
|
.valid.max_access_size = 4,
|
||||||
|
.impl.min_access_size = 1,
|
||||||
|
.impl.max_access_size = 4,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Accesses only reach these read and write functions if the MPC is
|
||||||
|
* blocking them; non-blocked accesses go directly to the downstream
|
||||||
|
* memory region without passing through this code.
|
||||||
|
*/
|
||||||
|
static MemTxResult tz_mpc_mem_blocked_read(void *opaque, hwaddr addr,
|
||||||
|
uint64_t *pdata,
|
||||||
|
unsigned size, MemTxAttrs attrs)
|
||||||
|
{
|
||||||
|
trace_tz_mpc_mem_blocked_read(addr, size, attrs.secure);
|
||||||
|
|
||||||
|
*pdata = 0;
|
||||||
|
return MEMTX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static MemTxResult tz_mpc_mem_blocked_write(void *opaque, hwaddr addr,
|
||||||
|
uint64_t value,
|
||||||
|
unsigned size, MemTxAttrs attrs)
|
||||||
|
{
|
||||||
|
trace_tz_mpc_mem_blocked_write(addr, value, size, attrs.secure);
|
||||||
|
|
||||||
|
return MEMTX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const MemoryRegionOps tz_mpc_mem_blocked_ops = {
|
||||||
|
.read_with_attrs = tz_mpc_mem_blocked_read,
|
||||||
|
.write_with_attrs = tz_mpc_mem_blocked_write,
|
||||||
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
||||||
|
.valid.min_access_size = 1,
|
||||||
|
.valid.max_access_size = 8,
|
||||||
|
.impl.min_access_size = 1,
|
||||||
|
.impl.max_access_size = 8,
|
||||||
|
};
|
||||||
|
|
||||||
|
static IOMMUTLBEntry tz_mpc_translate(IOMMUMemoryRegion *iommu,
|
||||||
|
hwaddr addr, IOMMUAccessFlags flags,
|
||||||
|
int iommu_idx)
|
||||||
|
{
|
||||||
|
TZMPC *s = TZ_MPC(container_of(iommu, TZMPC, upstream));
|
||||||
|
bool ok;
|
||||||
|
|
||||||
|
IOMMUTLBEntry ret = {
|
||||||
|
.iova = addr & ~(s->blocksize - 1),
|
||||||
|
.translated_addr = addr & ~(s->blocksize - 1),
|
||||||
|
.addr_mask = s->blocksize - 1,
|
||||||
|
.perm = IOMMU_RW,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Look at the per-block configuration for this address, and
|
||||||
|
* return a TLB entry directing the transaction at either
|
||||||
|
* downstream_as or blocked_io_as, as appropriate.
|
||||||
|
* For the moment, always permit accesses.
|
||||||
|
*/
|
||||||
|
ok = true;
|
||||||
|
|
||||||
|
trace_tz_mpc_translate(addr, flags,
|
||||||
|
iommu_idx == IOMMU_IDX_S ? "S" : "NS",
|
||||||
|
ok ? "pass" : "block");
|
||||||
|
|
||||||
|
ret.target_as = ok ? &s->downstream_as : &s->blocked_io_as;
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int tz_mpc_attrs_to_index(IOMMUMemoryRegion *iommu, MemTxAttrs attrs)
|
||||||
|
{
|
||||||
|
/* We treat unspecified attributes like secure. Transactions with
|
||||||
|
* unspecified attributes come from places like
|
||||||
|
* cpu_physical_memory_write_rom() for initial image load, and we want
|
||||||
|
* those to pass through the from-reset "everything is secure" config.
|
||||||
|
* All the real during-emulation transactions from the CPU will
|
||||||
|
* specify attributes.
|
||||||
|
*/
|
||||||
|
return (attrs.unspecified || attrs.secure) ? IOMMU_IDX_S : IOMMU_IDX_NS;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int tz_mpc_num_indexes(IOMMUMemoryRegion *iommu)
|
||||||
|
{
|
||||||
|
return IOMMU_NUM_INDEXES;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void tz_mpc_reset(DeviceState *dev)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
static void tz_mpc_init(Object *obj)
|
||||||
|
{
|
||||||
|
DeviceState *dev = DEVICE(obj);
|
||||||
|
TZMPC *s = TZ_MPC(obj);
|
||||||
|
|
||||||
|
qdev_init_gpio_out_named(dev, &s->irq, "irq", 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void tz_mpc_realize(DeviceState *dev, Error **errp)
|
||||||
|
{
|
||||||
|
Object *obj = OBJECT(dev);
|
||||||
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
||||||
|
TZMPC *s = TZ_MPC(dev);
|
||||||
|
uint64_t size;
|
||||||
|
|
||||||
|
/* We can't create the upstream end of the port until realize,
|
||||||
|
* as we don't know the size of the MR used as the downstream until then.
|
||||||
|
* We insist on having a downstream, to avoid complicating the code
|
||||||
|
* with handling the "don't know how big this is" case. It's easy
|
||||||
|
* enough for the user to create an unimplemented_device as downstream
|
||||||
|
* if they have nothing else to plug into this.
|
||||||
|
*/
|
||||||
|
if (!s->downstream) {
|
||||||
|
error_setg(errp, "MPC 'downstream' link not set");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
size = memory_region_size(s->downstream);
|
||||||
|
|
||||||
|
memory_region_init_iommu(&s->upstream, sizeof(s->upstream),
|
||||||
|
TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
|
||||||
|
obj, "tz-mpc-upstream", size);
|
||||||
|
|
||||||
|
/* In real hardware the block size is configurable. In QEMU we could
|
||||||
|
* make it configurable but will need it to be at least as big as the
|
||||||
|
* target page size so we can execute out of the resulting MRs. Guest
|
||||||
|
* software is supposed to check the block size using the BLK_CFG
|
||||||
|
* register, so make it fixed at the page size.
|
||||||
|
*/
|
||||||
|
s->blocksize = memory_region_iommu_get_min_page_size(&s->upstream);
|
||||||
|
if (size % s->blocksize != 0) {
|
||||||
|
error_setg(errp,
|
||||||
|
"MPC 'downstream' size %" PRId64
|
||||||
|
" is not a multiple of %" HWADDR_PRIx " bytes",
|
||||||
|
size, s->blocksize);
|
||||||
|
object_unref(OBJECT(&s->upstream));
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* BLK_MAX is the max value of BLK_IDX, which indexes an array of 32-bit
|
||||||
|
* words, each bit of which indicates one block.
|
||||||
|
*/
|
||||||
|
s->blk_max = DIV_ROUND_UP(size / s->blocksize, 32);
|
||||||
|
|
||||||
|
memory_region_init_io(&s->regmr, obj, &tz_mpc_reg_ops,
|
||||||
|
s, "tz-mpc-regs", 0x1000);
|
||||||
|
sysbus_init_mmio(sbd, &s->regmr);
|
||||||
|
|
||||||
|
sysbus_init_mmio(sbd, MEMORY_REGION(&s->upstream));
|
||||||
|
|
||||||
|
/* This memory region is not exposed to users of this device as a
|
||||||
|
* sysbus MMIO region, but is instead used internally as something
|
||||||
|
* that our IOMMU translate function might direct accesses to.
|
||||||
|
*/
|
||||||
|
memory_region_init_io(&s->blocked_io, obj, &tz_mpc_mem_blocked_ops,
|
||||||
|
s, "tz-mpc-blocked-io", size);
|
||||||
|
|
||||||
|
address_space_init(&s->downstream_as, s->downstream,
|
||||||
|
"tz-mpc-downstream");
|
||||||
|
address_space_init(&s->blocked_io_as, &s->blocked_io,
|
||||||
|
"tz-mpc-blocked-io");
|
||||||
|
}
|
||||||
|
|
||||||
|
static const VMStateDescription tz_mpc_vmstate = {
|
||||||
|
.name = "tz-mpc",
|
||||||
|
.version_id = 1,
|
||||||
|
.minimum_version_id = 1,
|
||||||
|
.fields = (VMStateField[]) {
|
||||||
|
VMSTATE_END_OF_LIST()
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static Property tz_mpc_properties[] = {
|
||||||
|
DEFINE_PROP_LINK("downstream", TZMPC, downstream,
|
||||||
|
TYPE_MEMORY_REGION, MemoryRegion *),
|
||||||
|
DEFINE_PROP_END_OF_LIST(),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void tz_mpc_class_init(ObjectClass *klass, void *data)
|
||||||
|
{
|
||||||
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
||||||
|
|
||||||
|
dc->realize = tz_mpc_realize;
|
||||||
|
dc->vmsd = &tz_mpc_vmstate;
|
||||||
|
dc->reset = tz_mpc_reset;
|
||||||
|
dc->props = tz_mpc_properties;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const TypeInfo tz_mpc_info = {
|
||||||
|
.name = TYPE_TZ_MPC,
|
||||||
|
.parent = TYPE_SYS_BUS_DEVICE,
|
||||||
|
.instance_size = sizeof(TZMPC),
|
||||||
|
.instance_init = tz_mpc_init,
|
||||||
|
.class_init = tz_mpc_class_init,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void tz_mpc_iommu_memory_region_class_init(ObjectClass *klass,
|
||||||
|
void *data)
|
||||||
|
{
|
||||||
|
IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
|
||||||
|
|
||||||
|
imrc->translate = tz_mpc_translate;
|
||||||
|
imrc->attrs_to_index = tz_mpc_attrs_to_index;
|
||||||
|
imrc->num_indexes = tz_mpc_num_indexes;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const TypeInfo tz_mpc_iommu_memory_region_info = {
|
||||||
|
.name = TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
|
||||||
|
.parent = TYPE_IOMMU_MEMORY_REGION,
|
||||||
|
.class_init = tz_mpc_iommu_memory_region_class_init,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void tz_mpc_register_types(void)
|
||||||
|
{
|
||||||
|
type_register_static(&tz_mpc_info);
|
||||||
|
type_register_static(&tz_mpc_iommu_memory_region_info);
|
||||||
|
}
|
||||||
|
|
||||||
|
type_init(tz_mpc_register_types);
|
||||||
70
include/hw/misc/tz-mpc.h
Normal file
70
include/hw/misc/tz-mpc.h
Normal file
@ -0,0 +1,70 @@
|
|||||||
|
/*
|
||||||
|
* ARM AHB5 TrustZone Memory Protection Controller emulation
|
||||||
|
*
|
||||||
|
* Copyright (c) 2018 Linaro Limited
|
||||||
|
* Written by Peter Maydell
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* This is a model of the TrustZone memory protection controller (MPC).
|
||||||
|
* It is documented in the ARM CoreLink SIE-200 System IP for Embedded TRM
|
||||||
|
* (DDI 0571G):
|
||||||
|
* https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g
|
||||||
|
*
|
||||||
|
* The MPC sits in front of memory and allows secure software to
|
||||||
|
* configure it to either pass through or reject transactions.
|
||||||
|
* Rejected transactions may be configured to either be aborted, or to
|
||||||
|
* behave as RAZ/WI. An interrupt can be signalled for a rejected transaction.
|
||||||
|
*
|
||||||
|
* The MPC has a register interface which the guest uses to configure it.
|
||||||
|
*
|
||||||
|
* QEMU interface:
|
||||||
|
* + sysbus MMIO region 0: MemoryRegion for the MPC's config registers
|
||||||
|
* + sysbus MMIO region 1: MemoryRegion for the upstream end of the MPC
|
||||||
|
* + Property "downstream": MemoryRegion defining the downstream memory
|
||||||
|
* + Named GPIO output "irq": set for a transaction-failed interrupt
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef TZ_MPC_H
|
||||||
|
#define TZ_MPC_H
|
||||||
|
|
||||||
|
#include "hw/sysbus.h"
|
||||||
|
|
||||||
|
#define TYPE_TZ_MPC "tz-mpc"
|
||||||
|
#define TZ_MPC(obj) OBJECT_CHECK(TZMPC, (obj), TYPE_TZ_MPC)
|
||||||
|
|
||||||
|
#define TZ_NUM_PORTS 16
|
||||||
|
|
||||||
|
#define TYPE_TZ_MPC_IOMMU_MEMORY_REGION "tz-mpc-iommu-memory-region"
|
||||||
|
|
||||||
|
typedef struct TZMPC TZMPC;
|
||||||
|
|
||||||
|
struct TZMPC {
|
||||||
|
/*< private >*/
|
||||||
|
SysBusDevice parent_obj;
|
||||||
|
|
||||||
|
/*< public >*/
|
||||||
|
|
||||||
|
qemu_irq irq;
|
||||||
|
|
||||||
|
/* Properties */
|
||||||
|
MemoryRegion *downstream;
|
||||||
|
|
||||||
|
hwaddr blocksize;
|
||||||
|
uint32_t blk_max;
|
||||||
|
|
||||||
|
/* MemoryRegions exposed to user */
|
||||||
|
MemoryRegion regmr;
|
||||||
|
IOMMUMemoryRegion upstream;
|
||||||
|
|
||||||
|
/* MemoryRegion used internally */
|
||||||
|
MemoryRegion blocked_io;
|
||||||
|
|
||||||
|
AddressSpace downstream_as;
|
||||||
|
AddressSpace blocked_io_as;
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue
Block a user