qemu/include/exec/ram_addr.h

514 lines
17 KiB
C
Raw Normal View History

/*
* Declarations for cpu physical memory functions
*
* Copyright 2011 Red Hat, Inc. and/or its affiliates
*
* Authors:
* Avi Kivity <avi@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* later. See the COPYING file in the top-level directory.
*
*/
/*
* This header is for use by exec.c and memory.c ONLY. Do not include it.
* The functions declared here will be removed soon.
*/
#ifndef RAM_ADDR_H
#define RAM_ADDR_H
#ifndef CONFIG_USER_ONLY
#include "cpu.h"
#include "sysemu/xen.h"
#include "sysemu/tcg.h"
#include "exec/ramlist.h"
#include "exec/ramblock.h"
migration: Split log_clear() into smaller chunks Currently we are doing log_clear() right after log_sync() which mostly keeps the old behavior when log_clear() was still part of log_sync(). This patch tries to further optimize the migration log_clear() code path to split huge log_clear()s into smaller chunks. We do this by spliting the whole guest memory region into memory chunks, whose size is decided by MigrationState.clear_bitmap_shift (an example will be given below). With that, we don't do the dirty bitmap clear operation on the remote node (e.g., KVM) when we fetch the dirty bitmap, instead we explicitly clear the dirty bitmap for the memory chunk for each of the first time we send a page in that chunk. Here comes an example. Assuming the guest has 64G memory, then before this patch the KVM ioctl KVM_CLEAR_DIRTY_LOG will be a single one covering 64G memory. If after the patch, let's assume when the clear bitmap shift is 18, then the memory chunk size on x86_64 will be 1UL<<18 * 4K = 1GB. Then instead of sending a big 64G ioctl, we'll send 64 small ioctls, each of the ioctl will cover 1G of the guest memory. For each of the 64 small ioctls, we'll only send if any of the page in that small chunk was going to be sent right away. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190603065056.25211-12-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-06-03 09:50:56 +03:00
/**
* clear_bmap_size: calculate clear bitmap size
*
* @pages: number of guest pages
* @shift: guest page number shift
*
* Returns: number of bits for the clear bitmap
*/
static inline long clear_bmap_size(uint64_t pages, uint8_t shift)
{
return DIV_ROUND_UP(pages, 1UL << shift);
}
/**
* clear_bmap_set: set clear bitmap for the page range
*
* @rb: the ramblock to operate on
* @start: the start page number
* @size: number of pages to set in the bitmap
*
* Returns: None
*/
static inline void clear_bmap_set(RAMBlock *rb, uint64_t start,
uint64_t npages)
{
uint8_t shift = rb->clear_bmap_shift;
bitmap_set_atomic(rb->clear_bmap, start >> shift,
clear_bmap_size(npages, shift));
}
/**
* clear_bmap_test_and_clear: test clear bitmap for the page, clear if set
*
* @rb: the ramblock to operate on
* @page: the page number to check
*
* Returns: true if the bit was set, false otherwise
*/
static inline bool clear_bmap_test_and_clear(RAMBlock *rb, uint64_t page)
{
uint8_t shift = rb->clear_bmap_shift;
return bitmap_test_and_clear_atomic(rb->clear_bmap, page >> shift, 1);
}
static inline bool offset_in_ramblock(RAMBlock *b, ram_addr_t offset)
{
return (b && b->host && offset < b->used_length) ? true : false;
}
static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
{
assert(offset_in_ramblock(block, offset));
return (char *)block->host + offset;
}
static inline unsigned long int ramblock_recv_bitmap_offset(void *host_addr,
RAMBlock *rb)
{
uint64_t host_addr_offset =
(uint64_t)(uintptr_t)(host_addr - (void *)rb->host);
return host_addr_offset >> TARGET_PAGE_BITS;
}
bool ramblock_is_pmem(RAMBlock *rb);
long qemu_minrampagesize(void);
long qemu_maxrampagesize(void);
/**
* qemu_ram_alloc_from_file,
* qemu_ram_alloc_from_fd: Allocate a ram block from the specified backing
* file or device
*
* Parameters:
* @size: the size in bytes of the ram block
* @mr: the memory region where the ram block is
* @ram_flags: RamBlock flags. Supported flags: RAM_SHARED, RAM_PMEM.
* @mem_path or @fd: specify the backing file or device
* @readonly: true to open @path for reading, false for read/write.
* @errp: pointer to Error*, to store an error if it happens
*
* Return:
* On success, return a pointer to the ram block.
* On failure, return NULL.
*/
RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
uint32_t ram_flags, const char *mem_path,
bool readonly, Error **errp);
RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr,
uint32_t ram_flags, int fd, off_t offset,
bool readonly, Error **errp);
RAMBlock *qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
MemoryRegion *mr, Error **errp);
RAMBlock *qemu_ram_alloc(ram_addr_t size, uint32_t ram_flags, MemoryRegion *mr,
Error **errp);
RAMBlock *qemu_ram_alloc_resizeable(ram_addr_t size, ram_addr_t max_size,
void (*resized)(const char*,
uint64_t length,
void *host),
MemoryRegion *mr, Error **errp);
void qemu_ram_free(RAMBlock *block);
int qemu_ram_resize(RAMBlock *block, ram_addr_t newsize, Error **errp);
void qemu_ram_msync(RAMBlock *block, ram_addr_t start, ram_addr_t length);
/* Clear whole block of mem */
static inline void qemu_ram_block_writeback(RAMBlock *block)
{
qemu_ram_msync(block, 0, block->used_length);
}
#define DIRTY_CLIENTS_ALL ((1 << DIRTY_MEMORY_NUM) - 1)
#define DIRTY_CLIENTS_NOCODE (DIRTY_CLIENTS_ALL & ~(1 << DIRTY_MEMORY_CODE))
void tb_invalidate_phys_range(ram_addr_t start, ram_addr_t end);
static inline bool cpu_physical_memory_get_dirty(ram_addr_t start,
ram_addr_t length,
unsigned client)
{
DirtyMemoryBlocks *blocks;
unsigned long end, page;
unsigned long idx, offset, base;
bool dirty = false;
assert(client < DIRTY_MEMORY_NUM);
end = TARGET_PAGE_ALIGN(start + length) >> TARGET_PAGE_BITS;
page = start >> TARGET_PAGE_BITS;
WITH_RCU_READ_LOCK_GUARD() {
blocks = qatomic_rcu_read(&ram_list.dirty_memory[client]);
idx = page / DIRTY_MEMORY_BLOCK_SIZE;
offset = page % DIRTY_MEMORY_BLOCK_SIZE;
base = page - offset;
while (page < end) {
unsigned long next = MIN(end, base + DIRTY_MEMORY_BLOCK_SIZE);
unsigned long num = next - base;
unsigned long found = find_next_bit(blocks->blocks[idx],
num, offset);
if (found < num) {
dirty = true;
break;
}
page = next;
idx++;
offset = 0;
base += DIRTY_MEMORY_BLOCK_SIZE;
}
}
return dirty;
}
static inline bool cpu_physical_memory_all_dirty(ram_addr_t start,
ram_addr_t length,
unsigned client)
{
DirtyMemoryBlocks *blocks;
unsigned long end, page;
unsigned long idx, offset, base;
bool dirty = true;
assert(client < DIRTY_MEMORY_NUM);
end = TARGET_PAGE_ALIGN(start + length) >> TARGET_PAGE_BITS;
page = start >> TARGET_PAGE_BITS;
RCU_READ_LOCK_GUARD();
blocks = qatomic_rcu_read(&ram_list.dirty_memory[client]);
idx = page / DIRTY_MEMORY_BLOCK_SIZE;
offset = page % DIRTY_MEMORY_BLOCK_SIZE;
base = page - offset;
while (page < end) {
unsigned long next = MIN(end, base + DIRTY_MEMORY_BLOCK_SIZE);
unsigned long num = next - base;
unsigned long found = find_next_zero_bit(blocks->blocks[idx], num, offset);
if (found < num) {
dirty = false;
break;
}
page = next;
idx++;
offset = 0;
base += DIRTY_MEMORY_BLOCK_SIZE;
}
return dirty;
}
static inline bool cpu_physical_memory_get_dirty_flag(ram_addr_t addr,
unsigned client)
{
return cpu_physical_memory_get_dirty(addr, 1, client);
}
static inline bool cpu_physical_memory_is_clean(ram_addr_t addr)
{
bool vga = cpu_physical_memory_get_dirty_flag(addr, DIRTY_MEMORY_VGA);
bool code = cpu_physical_memory_get_dirty_flag(addr, DIRTY_MEMORY_CODE);
bool migration =
cpu_physical_memory_get_dirty_flag(addr, DIRTY_MEMORY_MIGRATION);
return !(vga && code && migration);
}
static inline uint8_t cpu_physical_memory_range_includes_clean(ram_addr_t start,
ram_addr_t length,
uint8_t mask)
{
uint8_t ret = 0;
if (mask & (1 << DIRTY_MEMORY_VGA) &&
!cpu_physical_memory_all_dirty(start, length, DIRTY_MEMORY_VGA)) {
ret |= (1 << DIRTY_MEMORY_VGA);
}
if (mask & (1 << DIRTY_MEMORY_CODE) &&
!cpu_physical_memory_all_dirty(start, length, DIRTY_MEMORY_CODE)) {
ret |= (1 << DIRTY_MEMORY_CODE);
}
if (mask & (1 << DIRTY_MEMORY_MIGRATION) &&
!cpu_physical_memory_all_dirty(start, length, DIRTY_MEMORY_MIGRATION)) {
ret |= (1 << DIRTY_MEMORY_MIGRATION);
}
return ret;
}
static inline void cpu_physical_memory_set_dirty_flag(ram_addr_t addr,
unsigned client)
{
unsigned long page, idx, offset;
DirtyMemoryBlocks *blocks;
assert(client < DIRTY_MEMORY_NUM);
page = addr >> TARGET_PAGE_BITS;
idx = page / DIRTY_MEMORY_BLOCK_SIZE;
offset = page % DIRTY_MEMORY_BLOCK_SIZE;
RCU_READ_LOCK_GUARD();
blocks = qatomic_rcu_read(&ram_list.dirty_memory[client]);
set_bit_atomic(offset, blocks->blocks[idx]);
}
static inline void cpu_physical_memory_set_dirty_range(ram_addr_t start,
ram_addr_t length,
uint8_t mask)
{
DirtyMemoryBlocks *blocks[DIRTY_MEMORY_NUM];
unsigned long end, page;
unsigned long idx, offset, base;
int i;
if (!mask && !xen_enabled()) {
return;
}
end = TARGET_PAGE_ALIGN(start + length) >> TARGET_PAGE_BITS;
page = start >> TARGET_PAGE_BITS;
WITH_RCU_READ_LOCK_GUARD() {
for (i = 0; i < DIRTY_MEMORY_NUM; i++) {
blocks[i] = qatomic_rcu_read(&ram_list.dirty_memory[i]);
}
idx = page / DIRTY_MEMORY_BLOCK_SIZE;
offset = page % DIRTY_MEMORY_BLOCK_SIZE;
base = page - offset;
while (page < end) {
unsigned long next = MIN(end, base + DIRTY_MEMORY_BLOCK_SIZE);
if (likely(mask & (1 << DIRTY_MEMORY_MIGRATION))) {
bitmap_set_atomic(blocks[DIRTY_MEMORY_MIGRATION]->blocks[idx],
offset, next - page);
}
if (unlikely(mask & (1 << DIRTY_MEMORY_VGA))) {
bitmap_set_atomic(blocks[DIRTY_MEMORY_VGA]->blocks[idx],
offset, next - page);
}
if (unlikely(mask & (1 << DIRTY_MEMORY_CODE))) {
bitmap_set_atomic(blocks[DIRTY_MEMORY_CODE]->blocks[idx],
offset, next - page);
}
page = next;
idx++;
offset = 0;
base += DIRTY_MEMORY_BLOCK_SIZE;
}
}
xen_hvm_modified_memory(start, length);
}
#if !defined(_WIN32)
static inline void cpu_physical_memory_set_dirty_lebitmap(unsigned long *bitmap,
ram_addr_t start,
ram_addr_t pages)
{
unsigned long i, j;
unsigned long page_number, c;
hwaddr addr;
ram_addr_t ram_addr;
unsigned long len = (pages + HOST_LONG_BITS - 1) / HOST_LONG_BITS;
unsigned long hpratio = qemu_real_host_page_size / TARGET_PAGE_SIZE;
unsigned long page = BIT_WORD(start >> TARGET_PAGE_BITS);
/* start address is aligned at the start of a word? */
if ((((page * BITS_PER_LONG) << TARGET_PAGE_BITS) == start) &&
(hpratio == 1)) {
unsigned long **blocks[DIRTY_MEMORY_NUM];
unsigned long idx;
unsigned long offset;
long k;
long nr = BITS_TO_LONGS(pages);
idx = (start >> TARGET_PAGE_BITS) / DIRTY_MEMORY_BLOCK_SIZE;
offset = BIT_WORD((start >> TARGET_PAGE_BITS) %
DIRTY_MEMORY_BLOCK_SIZE);
WITH_RCU_READ_LOCK_GUARD() {
for (i = 0; i < DIRTY_MEMORY_NUM; i++) {
blocks[i] =
qatomic_rcu_read(&ram_list.dirty_memory[i])->blocks;
}
for (k = 0; k < nr; k++) {
if (bitmap[k]) {
unsigned long temp = leul_to_cpu(bitmap[k]);
qatomic_or(&blocks[DIRTY_MEMORY_VGA][idx][offset], temp);
if (global_dirty_log) {
qatomic_or(
&blocks[DIRTY_MEMORY_MIGRATION][idx][offset],
temp);
}
if (tcg_enabled()) {
qatomic_or(&blocks[DIRTY_MEMORY_CODE][idx][offset],
temp);
}
}
if (++offset >= BITS_TO_LONGS(DIRTY_MEMORY_BLOCK_SIZE)) {
offset = 0;
idx++;
}
}
}
xen_hvm_modified_memory(start, pages << TARGET_PAGE_BITS);
} else {
uint8_t clients = tcg_enabled() ? DIRTY_CLIENTS_ALL : DIRTY_CLIENTS_NOCODE;
if (!global_dirty_log) {
clients &= ~(1 << DIRTY_MEMORY_MIGRATION);
}
/*
* bitmap-traveling is faster than memory-traveling (for addr...)
* especially when most of the memory is not dirty.
*/
for (i = 0; i < len; i++) {
if (bitmap[i] != 0) {
c = leul_to_cpu(bitmap[i]);
do {
j = ctzl(c);
c &= ~(1ul << j);
page_number = (i * HOST_LONG_BITS + j) * hpratio;
addr = page_number * TARGET_PAGE_SIZE;
ram_addr = start + addr;
cpu_physical_memory_set_dirty_range(ram_addr,
TARGET_PAGE_SIZE * hpratio, clients);
} while (c != 0);
}
}
}
}
#endif /* not _WIN32 */
bool cpu_physical_memory_test_and_clear_dirty(ram_addr_t start,
ram_addr_t length,
unsigned client);
DirtyBitmapSnapshot *cpu_physical_memory_snapshot_and_clear_dirty
(MemoryRegion *mr, hwaddr offset, hwaddr length, unsigned client);
bool cpu_physical_memory_snapshot_get_dirty(DirtyBitmapSnapshot *snap,
ram_addr_t start,
ram_addr_t length);
static inline void cpu_physical_memory_clear_dirty_range(ram_addr_t start,
ram_addr_t length)
{
cpu_physical_memory_test_and_clear_dirty(start, length, DIRTY_MEMORY_MIGRATION);
cpu_physical_memory_test_and_clear_dirty(start, length, DIRTY_MEMORY_VGA);
cpu_physical_memory_test_and_clear_dirty(start, length, DIRTY_MEMORY_CODE);
}
/* Called with RCU critical section */
static inline
uint64_t cpu_physical_memory_sync_dirty_bitmap(RAMBlock *rb,
ram_addr_t start,
ram_addr_t length)
{
ram_addr_t addr;
unsigned long word = BIT_WORD((start + rb->offset) >> TARGET_PAGE_BITS);
uint64_t num_dirty = 0;
unsigned long *dest = rb->bmap;
/* start address and length is aligned at the start of a word? */
if (((word * BITS_PER_LONG) << TARGET_PAGE_BITS) ==
(start + rb->offset) &&
!(length & ((BITS_PER_LONG << TARGET_PAGE_BITS) - 1))) {
int k;
int nr = BITS_TO_LONGS(length >> TARGET_PAGE_BITS);
unsigned long * const *src;
unsigned long idx = (word * BITS_PER_LONG) / DIRTY_MEMORY_BLOCK_SIZE;
unsigned long offset = BIT_WORD((word * BITS_PER_LONG) %
DIRTY_MEMORY_BLOCK_SIZE);
unsigned long page = BIT_WORD(start >> TARGET_PAGE_BITS);
src = qatomic_rcu_read(
&ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION])->blocks;
for (k = page; k < page + nr; k++) {
if (src[idx][offset]) {
unsigned long bits = qatomic_xchg(&src[idx][offset], 0);
unsigned long new_dirty;
new_dirty = ~dest[k];
dest[k] |= bits;
new_dirty &= bits;
num_dirty += ctpopl(new_dirty);
}
if (++offset >= BITS_TO_LONGS(DIRTY_MEMORY_BLOCK_SIZE)) {
offset = 0;
idx++;
}
}
memory: Introduce memory listener hook log_clear() Introduce a new memory region listener hook log_clear() to allow the listeners to hook onto the points where the dirty bitmap is cleared by the bitmap users. Previously log_sync() contains two operations: - dirty bitmap collection, and, - dirty bitmap clear on remote site. Let's take KVM as example - log_sync() for KVM will first copy the kernel dirty bitmap to userspace, and at the same time we'll clear the dirty bitmap there along with re-protecting all the guest pages again. We add this new log_clear() interface only to split the old log_sync() into two separated procedures: - use log_sync() to collect the collection only, and, - use log_clear() to clear the remote dirty bitmap. With the new interface, the memory listener users will still be able to decide how to implement the log synchronization procedure, e.g., they can still only provide log_sync() method only and put all the two procedures within log_sync() (that's how the old KVM works before KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is introduced). However with this new interface the memory listener users will start to have a chance to postpone the log clear operation explicitly if the module supports. That can really benefit users like KVM at least for host kernels that support KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2. There are three places that can clear dirty bits in any one of the dirty bitmap in the ram_list.dirty_memory[3] array: cpu_physical_memory_snapshot_and_clear_dirty cpu_physical_memory_test_and_clear_dirty cpu_physical_memory_sync_dirty_bitmap Currently we hook directly into each of the functions to notify about the log_clear(). Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20190603065056.25211-7-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-06-03 09:50:51 +03:00
migration: Split log_clear() into smaller chunks Currently we are doing log_clear() right after log_sync() which mostly keeps the old behavior when log_clear() was still part of log_sync(). This patch tries to further optimize the migration log_clear() code path to split huge log_clear()s into smaller chunks. We do this by spliting the whole guest memory region into memory chunks, whose size is decided by MigrationState.clear_bitmap_shift (an example will be given below). With that, we don't do the dirty bitmap clear operation on the remote node (e.g., KVM) when we fetch the dirty bitmap, instead we explicitly clear the dirty bitmap for the memory chunk for each of the first time we send a page in that chunk. Here comes an example. Assuming the guest has 64G memory, then before this patch the KVM ioctl KVM_CLEAR_DIRTY_LOG will be a single one covering 64G memory. If after the patch, let's assume when the clear bitmap shift is 18, then the memory chunk size on x86_64 will be 1UL<<18 * 4K = 1GB. Then instead of sending a big 64G ioctl, we'll send 64 small ioctls, each of the ioctl will cover 1G of the guest memory. For each of the 64 small ioctls, we'll only send if any of the page in that small chunk was going to be sent right away. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190603065056.25211-12-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2019-06-03 09:50:56 +03:00
if (rb->clear_bmap) {
/*
* Postpone the dirty bitmap clear to the point before we
* really send the pages, also we will split the clear
* dirty procedure into smaller chunks.
*/
clear_bmap_set(rb, start >> TARGET_PAGE_BITS,
length >> TARGET_PAGE_BITS);
} else {
/* Slow path - still do that in a huge chunk */
memory_region_clear_dirty_bitmap(rb->mr, start, length);
}
} else {
ram_addr_t offset = rb->offset;
for (addr = 0; addr < length; addr += TARGET_PAGE_SIZE) {
if (cpu_physical_memory_test_and_clear_dirty(
start + addr + offset,
TARGET_PAGE_SIZE,
DIRTY_MEMORY_MIGRATION)) {
long k = (start + addr) >> TARGET_PAGE_BITS;
if (!test_and_set_bit(k, dest)) {
num_dirty++;
}
}
}
}
return num_dirty;
}
#endif
#endif