qemu/hw/i386/intel_iommu.c

3914 lines
123 KiB
C
Raw Normal View History

/*
* QEMU emulation of an Intel IOMMU (VT-d)
* (DMA Remapping device)
*
* Copyright (C) 2013 Knut Omang, Oracle <knut.omang@oracle.com>
* Copyright (C) 2014 Le Tan, <tamlokveer@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "qapi/error.h"
#include "hw/sysbus.h"
#include "exec/address-spaces.h"
#include "intel_iommu_internal.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
#include "hw/qdev-properties.h"
#include "hw/i386/pc.h"
#include "hw/i386/apic-msidef.h"
#include "hw/boards.h"
#include "hw/i386/x86-iommu.h"
#include "hw/pci-host/q35.h"
#include "sysemu/kvm.h"
#include "sysemu/sysemu.h"
#include "hw/i386/apic_internal.h"
#include "kvm/kvm_i386.h"
#include "migration/vmstate.h"
#include "trace.h"
/* context entry operations */
#define VTD_CE_GET_RID2PASID(ce) \
((ce)->val[1] & VTD_SM_CONTEXT_ENTRY_RID2PASID_MASK)
#define VTD_CE_GET_PASID_DIR_TABLE(ce) \
((ce)->val[0] & VTD_PASID_DIR_BASE_ADDR_MASK)
/* pe operations */
#define VTD_PE_GET_TYPE(pe) ((pe)->val[0] & VTD_SM_PASID_ENTRY_PGTT)
#define VTD_PE_GET_LEVEL(pe) (2 + (((pe)->val[0] >> 2) & VTD_SM_PASID_ENTRY_AW))
#define VTD_PE_GET_FPD_ERR(ret_fr, is_fpd_set, s, source_id, addr, is_write) {\
if (ret_fr) { \
ret_fr = -ret_fr; \
if (is_fpd_set && vtd_is_qualified_fault(ret_fr)) { \
trace_vtd_fault_disabled(); \
} else { \
vtd_report_dmar_fault(s, source_id, addr, ret_fr, is_write); \
} \
goto error; \
} \
}
intel_iommu: better handling of dmar state switch QEMU is not handling the global DMAR switch well, especially when from "on" to "off". Let's first take the example of system reset. Assuming that a guest has IOMMU enabled. When it reboots, we will drop all the existing DMAR mappings to handle the system reset, however we'll still keep the existing memory layouts which has the IOMMU memory region enabled. So after the reboot and before the kernel reloads again, there will be no mapping at all for the host device. That's problematic since any software (for example, SeaBIOS) that runs earlier than the kernel after the reboot will assume the IOMMU is disabled, so any DMA from the software will fail. For example, a guest that boots on an assigned NVMe device might fail to find the boot device after a system reboot/reset and we'll be able to observe SeaBIOS errors if we capture the debugging log: WARNING - Timeout at nvme_wait:144! Meanwhile, we should see DMAR errors on the host of that NVMe device. It's the DMA fault that caused a NVMe driver timeout. The correct fix should be that we do proper switching of device DMA address spaces when system resets, which will setup correct memory regions and notify the backend of the devices. This might not affect much on non-assigned devices since QEMU VT-d emulation will assume a default passthrough mapping if DMAR is not enabled in the GCMD register (please refer to vtd_iommu_translate). However that's required for an assigned devices, since that'll rebuild the correct GPA to HPA mapping that is needed for any DMA operation during guest bootstrap. Besides the system reset, we have some other places that might change the global DMAR status and we'd better do the same thing there. For example, when we change the state of GCMD register, or the DMAR root pointer. Do the same refresh for all these places. For these two places we'll also need to explicitly invalidate the context entry cache and iotlb cache. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173 CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> -- v2: - do the same for GCMD write, or root pointer update [Alex] - test is carried out by me this time, by observing the vtd_switch_address_space tracepoint after system reboot v3: - rewrite commit message as suggested by Alex Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-29 06:36:15 +03:00
static void vtd_address_space_refresh_all(IntelIOMMUState *s);
static void vtd_address_space_unmap(VTDAddressSpace *as, IOMMUNotifier *n);
intel_iommu: better handling of dmar state switch QEMU is not handling the global DMAR switch well, especially when from "on" to "off". Let's first take the example of system reset. Assuming that a guest has IOMMU enabled. When it reboots, we will drop all the existing DMAR mappings to handle the system reset, however we'll still keep the existing memory layouts which has the IOMMU memory region enabled. So after the reboot and before the kernel reloads again, there will be no mapping at all for the host device. That's problematic since any software (for example, SeaBIOS) that runs earlier than the kernel after the reboot will assume the IOMMU is disabled, so any DMA from the software will fail. For example, a guest that boots on an assigned NVMe device might fail to find the boot device after a system reboot/reset and we'll be able to observe SeaBIOS errors if we capture the debugging log: WARNING - Timeout at nvme_wait:144! Meanwhile, we should see DMAR errors on the host of that NVMe device. It's the DMA fault that caused a NVMe driver timeout. The correct fix should be that we do proper switching of device DMA address spaces when system resets, which will setup correct memory regions and notify the backend of the devices. This might not affect much on non-assigned devices since QEMU VT-d emulation will assume a default passthrough mapping if DMAR is not enabled in the GCMD register (please refer to vtd_iommu_translate). However that's required for an assigned devices, since that'll rebuild the correct GPA to HPA mapping that is needed for any DMA operation during guest bootstrap. Besides the system reset, we have some other places that might change the global DMAR status and we'd better do the same thing there. For example, when we change the state of GCMD register, or the DMAR root pointer. Do the same refresh for all these places. For these two places we'll also need to explicitly invalidate the context entry cache and iotlb cache. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173 CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> -- v2: - do the same for GCMD write, or root pointer update [Alex] - test is carried out by me this time, by observing the vtd_switch_address_space tracepoint after system reboot v3: - rewrite commit message as suggested by Alex Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-29 06:36:15 +03:00
static void vtd_panic_require_caching_mode(void)
{
error_report("We need to set caching-mode=on for intel-iommu to enable "
"device assignment with IOMMU protection.");
exit(1);
}
static void vtd_define_quad(IntelIOMMUState *s, hwaddr addr, uint64_t val,
uint64_t wmask, uint64_t w1cmask)
{
stq_le_p(&s->csr[addr], val);
stq_le_p(&s->wmask[addr], wmask);
stq_le_p(&s->w1cmask[addr], w1cmask);
}
static void vtd_define_quad_wo(IntelIOMMUState *s, hwaddr addr, uint64_t mask)
{
stq_le_p(&s->womask[addr], mask);
}
static void vtd_define_long(IntelIOMMUState *s, hwaddr addr, uint32_t val,
uint32_t wmask, uint32_t w1cmask)
{
stl_le_p(&s->csr[addr], val);
stl_le_p(&s->wmask[addr], wmask);
stl_le_p(&s->w1cmask[addr], w1cmask);
}
static void vtd_define_long_wo(IntelIOMMUState *s, hwaddr addr, uint32_t mask)
{
stl_le_p(&s->womask[addr], mask);
}
/* "External" get/set operations */
static void vtd_set_quad(IntelIOMMUState *s, hwaddr addr, uint64_t val)
{
uint64_t oldval = ldq_le_p(&s->csr[addr]);
uint64_t wmask = ldq_le_p(&s->wmask[addr]);
uint64_t w1cmask = ldq_le_p(&s->w1cmask[addr]);
stq_le_p(&s->csr[addr],
((oldval & ~wmask) | (val & wmask)) & ~(w1cmask & val));
}
static void vtd_set_long(IntelIOMMUState *s, hwaddr addr, uint32_t val)
{
uint32_t oldval = ldl_le_p(&s->csr[addr]);
uint32_t wmask = ldl_le_p(&s->wmask[addr]);
uint32_t w1cmask = ldl_le_p(&s->w1cmask[addr]);
stl_le_p(&s->csr[addr],
((oldval & ~wmask) | (val & wmask)) & ~(w1cmask & val));
}
static uint64_t vtd_get_quad(IntelIOMMUState *s, hwaddr addr)
{
uint64_t val = ldq_le_p(&s->csr[addr]);
uint64_t womask = ldq_le_p(&s->womask[addr]);
return val & ~womask;
}
static uint32_t vtd_get_long(IntelIOMMUState *s, hwaddr addr)
{
uint32_t val = ldl_le_p(&s->csr[addr]);
uint32_t womask = ldl_le_p(&s->womask[addr]);
return val & ~womask;
}
/* "Internal" get/set operations */
static uint64_t vtd_get_quad_raw(IntelIOMMUState *s, hwaddr addr)
{
return ldq_le_p(&s->csr[addr]);
}
static uint32_t vtd_get_long_raw(IntelIOMMUState *s, hwaddr addr)
{
return ldl_le_p(&s->csr[addr]);
}
static void vtd_set_quad_raw(IntelIOMMUState *s, hwaddr addr, uint64_t val)
{
stq_le_p(&s->csr[addr], val);
}
static uint32_t vtd_set_clear_mask_long(IntelIOMMUState *s, hwaddr addr,
uint32_t clear, uint32_t mask)
{
uint32_t new_val = (ldl_le_p(&s->csr[addr]) & ~clear) | mask;
stl_le_p(&s->csr[addr], new_val);
return new_val;
}
static uint64_t vtd_set_clear_mask_quad(IntelIOMMUState *s, hwaddr addr,
uint64_t clear, uint64_t mask)
{
uint64_t new_val = (ldq_le_p(&s->csr[addr]) & ~clear) | mask;
stq_le_p(&s->csr[addr], new_val);
return new_val;
}
static inline void vtd_iommu_lock(IntelIOMMUState *s)
{
qemu_mutex_lock(&s->iommu_lock);
}
static inline void vtd_iommu_unlock(IntelIOMMUState *s)
{
qemu_mutex_unlock(&s->iommu_lock);
}
static void vtd_update_scalable_state(IntelIOMMUState *s)
{
uint64_t val = vtd_get_quad_raw(s, DMAR_RTADDR_REG);
if (s->scalable_mode) {
s->root_scalable = val & VTD_RTADDR_SMT;
}
}
/* Whether the address space needs to notify new mappings */
static inline gboolean vtd_as_has_map_notifier(VTDAddressSpace *as)
{
return as->notifier_flags & IOMMU_NOTIFIER_MAP;
}
/* GHashTable functions */
static gboolean vtd_uint64_equal(gconstpointer v1, gconstpointer v2)
{
return *((const uint64_t *)v1) == *((const uint64_t *)v2);
}
static guint vtd_uint64_hash(gconstpointer v)
{
return (guint)*(const uint64_t *)v;
}
static gboolean vtd_hash_remove_by_domain(gpointer key, gpointer value,
gpointer user_data)
{
VTDIOTLBEntry *entry = (VTDIOTLBEntry *)value;
uint16_t domain_id = *(uint16_t *)user_data;
return entry->domain_id == domain_id;
}
/* The shift of an addr for a certain level of paging structure */
static inline uint32_t vtd_slpt_level_shift(uint32_t level)
{
assert(level != 0);
return VTD_PAGE_SHIFT_4K + (level - 1) * VTD_SL_LEVEL_BITS;
}
static inline uint64_t vtd_slpt_level_page_mask(uint32_t level)
{
return ~((1ULL << vtd_slpt_level_shift(level)) - 1);
}
static gboolean vtd_hash_remove_by_page(gpointer key, gpointer value,
gpointer user_data)
{
VTDIOTLBEntry *entry = (VTDIOTLBEntry *)value;
VTDIOTLBPageInvInfo *info = (VTDIOTLBPageInvInfo *)user_data;
uint64_t gfn = (info->addr >> VTD_PAGE_SHIFT_4K) & info->mask;
uint64_t gfn_tlb = (info->addr & entry->mask) >> VTD_PAGE_SHIFT_4K;
return (entry->domain_id == info->domain_id) &&
(((entry->gfn & info->mask) == gfn) ||
(entry->gfn == gfn_tlb));
}
/* Reset all the gen of VTDAddressSpace to zero and set the gen of
* IntelIOMMUState to 1. Must be called with IOMMU lock held.
*/
static void vtd_reset_context_cache_locked(IntelIOMMUState *s)
{
VTDAddressSpace *vtd_as;
VTDBus *vtd_bus;
GHashTableIter bus_it;
uint32_t devfn_it;
trace_vtd_context_cache_reset();
g_hash_table_iter_init(&bus_it, s->vtd_as_by_busptr);
while (g_hash_table_iter_next (&bus_it, NULL, (void**)&vtd_bus)) {
for (devfn_it = 0; devfn_it < PCI_DEVFN_MAX; ++devfn_it) {
vtd_as = vtd_bus->dev_as[devfn_it];
if (!vtd_as) {
continue;
}
vtd_as->context_cache_entry.context_cache_gen = 0;
}
}
s->context_cache_gen = 1;
}
/* Must be called with IOMMU lock held. */
static void vtd_reset_iotlb_locked(IntelIOMMUState *s)
{
assert(s->iotlb);
g_hash_table_remove_all(s->iotlb);
}
static void vtd_reset_iotlb(IntelIOMMUState *s)
{
vtd_iommu_lock(s);
vtd_reset_iotlb_locked(s);
vtd_iommu_unlock(s);
}
static void vtd_reset_caches(IntelIOMMUState *s)
{
vtd_iommu_lock(s);
vtd_reset_iotlb_locked(s);
vtd_reset_context_cache_locked(s);
vtd_iommu_unlock(s);
}
static uint64_t vtd_get_iotlb_key(uint64_t gfn, uint16_t source_id,
uint32_t level)
{
return gfn | ((uint64_t)(source_id) << VTD_IOTLB_SID_SHIFT) |
((uint64_t)(level) << VTD_IOTLB_LVL_SHIFT);
}
static uint64_t vtd_get_iotlb_gfn(hwaddr addr, uint32_t level)
{
return (addr & vtd_slpt_level_page_mask(level)) >> VTD_PAGE_SHIFT_4K;
}
/* Must be called with IOMMU lock held */
static VTDIOTLBEntry *vtd_lookup_iotlb(IntelIOMMUState *s, uint16_t source_id,
hwaddr addr)
{
VTDIOTLBEntry *entry;
uint64_t key;
int level;
for (level = VTD_SL_PT_LEVEL; level < VTD_SL_PML4_LEVEL; level++) {
key = vtd_get_iotlb_key(vtd_get_iotlb_gfn(addr, level),
source_id, level);
entry = g_hash_table_lookup(s->iotlb, &key);
if (entry) {
goto out;
}
}
out:
return entry;
}
/* Must be with IOMMU lock held */
static void vtd_update_iotlb(IntelIOMMUState *s, uint16_t source_id,
uint16_t domain_id, hwaddr addr, uint64_t slpte,
uint8_t access_flags, uint32_t level)
{
VTDIOTLBEntry *entry = g_malloc(sizeof(*entry));
uint64_t *key = g_malloc(sizeof(*key));
uint64_t gfn = vtd_get_iotlb_gfn(addr, level);
trace_vtd_iotlb_page_update(source_id, addr, slpte, domain_id);
if (g_hash_table_size(s->iotlb) >= VTD_IOTLB_MAX_SIZE) {
trace_vtd_iotlb_reset("iotlb exceeds size limit");
vtd_reset_iotlb_locked(s);
}
entry->gfn = gfn;
entry->domain_id = domain_id;
entry->slpte = slpte;
entry->access_flags = access_flags;
entry->mask = vtd_slpt_level_page_mask(level);
*key = vtd_get_iotlb_key(gfn, source_id, level);
g_hash_table_replace(s->iotlb, key, entry);
}
/* Given the reg addr of both the message data and address, generate an
* interrupt via MSI.
*/
static void vtd_generate_interrupt(IntelIOMMUState *s, hwaddr mesg_addr_reg,
hwaddr mesg_data_reg)
{
MSIMessage msi;
assert(mesg_data_reg < DMAR_REG_SIZE);
assert(mesg_addr_reg < DMAR_REG_SIZE);
msi.address = vtd_get_long_raw(s, mesg_addr_reg);
msi.data = vtd_get_long_raw(s, mesg_data_reg);
trace_vtd_irq_generate(msi.address, msi.data);
apic_get_class()->send_msi(&msi);
}
/* Generate a fault event to software via MSI if conditions are met.
* Notice that the value of FSTS_REG being passed to it should be the one
* before any update.
*/
static void vtd_generate_fault_event(IntelIOMMUState *s, uint32_t pre_fsts)
{
if (pre_fsts & VTD_FSTS_PPF || pre_fsts & VTD_FSTS_PFO ||
pre_fsts & VTD_FSTS_IQE) {
error_report_once("There are previous interrupt conditions "
"to be serviced by software, fault event "
"is not generated");
return;
}
vtd_set_clear_mask_long(s, DMAR_FECTL_REG, 0, VTD_FECTL_IP);
if (vtd_get_long_raw(s, DMAR_FECTL_REG) & VTD_FECTL_IM) {
error_report_once("Interrupt Mask set, irq is not generated");
} else {
vtd_generate_interrupt(s, DMAR_FEADDR_REG, DMAR_FEDATA_REG);
vtd_set_clear_mask_long(s, DMAR_FECTL_REG, VTD_FECTL_IP, 0);
}
}
/* Check if the Fault (F) field of the Fault Recording Register referenced by
* @index is Set.
*/
static bool vtd_is_frcd_set(IntelIOMMUState *s, uint16_t index)
{
/* Each reg is 128-bit */
hwaddr addr = DMAR_FRCD_REG_OFFSET + (((uint64_t)index) << 4);
addr += 8; /* Access the high 64-bit half */
assert(index < DMAR_FRCD_REG_NR);
return vtd_get_quad_raw(s, addr) & VTD_FRCD_F;
}
/* Update the PPF field of Fault Status Register.
* Should be called whenever change the F field of any fault recording
* registers.
*/
static void vtd_update_fsts_ppf(IntelIOMMUState *s)
{
uint32_t i;
uint32_t ppf_mask = 0;
for (i = 0; i < DMAR_FRCD_REG_NR; i++) {
if (vtd_is_frcd_set(s, i)) {
ppf_mask = VTD_FSTS_PPF;
break;
}
}
vtd_set_clear_mask_long(s, DMAR_FSTS_REG, VTD_FSTS_PPF, ppf_mask);
trace_vtd_fsts_ppf(!!ppf_mask);
}
static void vtd_set_frcd_and_update_ppf(IntelIOMMUState *s, uint16_t index)
{
/* Each reg is 128-bit */
hwaddr addr = DMAR_FRCD_REG_OFFSET + (((uint64_t)index) << 4);
addr += 8; /* Access the high 64-bit half */
assert(index < DMAR_FRCD_REG_NR);
vtd_set_clear_mask_quad(s, addr, 0, VTD_FRCD_F);
vtd_update_fsts_ppf(s);
}
/* Must not update F field now, should be done later */
static void vtd_record_frcd(IntelIOMMUState *s, uint16_t index,
uint16_t source_id, hwaddr addr,
VTDFaultReason fault, bool is_write)
{
uint64_t hi = 0, lo;
hwaddr frcd_reg_addr = DMAR_FRCD_REG_OFFSET + (((uint64_t)index) << 4);
assert(index < DMAR_FRCD_REG_NR);
lo = VTD_FRCD_FI(addr);
hi = VTD_FRCD_SID(source_id) | VTD_FRCD_FR(fault);
if (!is_write) {
hi |= VTD_FRCD_T;
}
vtd_set_quad_raw(s, frcd_reg_addr, lo);
vtd_set_quad_raw(s, frcd_reg_addr + 8, hi);
trace_vtd_frr_new(index, hi, lo);
}
/* Try to collapse multiple pending faults from the same requester */
static bool vtd_try_collapse_fault(IntelIOMMUState *s, uint16_t source_id)
{
uint32_t i;
uint64_t frcd_reg;
hwaddr addr = DMAR_FRCD_REG_OFFSET + 8; /* The high 64-bit half */
for (i = 0; i < DMAR_FRCD_REG_NR; i++) {
frcd_reg = vtd_get_quad_raw(s, addr);
if ((frcd_reg & VTD_FRCD_F) &&
((frcd_reg & VTD_FRCD_SID_MASK) == source_id)) {
return true;
}
addr += 16; /* 128-bit for each */
}
return false;
}
/* Log and report an DMAR (address translation) fault to software */
static void vtd_report_dmar_fault(IntelIOMMUState *s, uint16_t source_id,
hwaddr addr, VTDFaultReason fault,
bool is_write)
{
uint32_t fsts_reg = vtd_get_long_raw(s, DMAR_FSTS_REG);
assert(fault < VTD_FR_MAX);
if (fault == VTD_FR_RESERVED_ERR) {
/* This is not a normal fault reason case. Drop it. */
return;
}
trace_vtd_dmar_fault(source_id, fault, addr, is_write);
if (fsts_reg & VTD_FSTS_PFO) {
error_report_once("New fault is not recorded due to "
"Primary Fault Overflow");
return;
}
if (vtd_try_collapse_fault(s, source_id)) {
error_report_once("New fault is not recorded due to "
"compression of faults");
return;
}
if (vtd_is_frcd_set(s, s->next_frcd_reg)) {
error_report_once("Next Fault Recording Reg is used, "
"new fault is not recorded, set PFO field");
vtd_set_clear_mask_long(s, DMAR_FSTS_REG, 0, VTD_FSTS_PFO);
return;
}
vtd_record_frcd(s, s->next_frcd_reg, source_id, addr, fault, is_write);
if (fsts_reg & VTD_FSTS_PPF) {
error_report_once("There are pending faults already, "
"fault event is not generated");
vtd_set_frcd_and_update_ppf(s, s->next_frcd_reg);
s->next_frcd_reg++;
if (s->next_frcd_reg == DMAR_FRCD_REG_NR) {
s->next_frcd_reg = 0;
}
} else {
vtd_set_clear_mask_long(s, DMAR_FSTS_REG, VTD_FSTS_FRI_MASK,
VTD_FSTS_FRI(s->next_frcd_reg));
vtd_set_frcd_and_update_ppf(s, s->next_frcd_reg); /* Will set PPF */
s->next_frcd_reg++;
if (s->next_frcd_reg == DMAR_FRCD_REG_NR) {
s->next_frcd_reg = 0;
}
/* This case actually cause the PPF to be Set.
* So generate fault event (interrupt).
*/
vtd_generate_fault_event(s, fsts_reg);
}
}
/* Handle Invalidation Queue Errors of queued invalidation interface error
* conditions.
*/
static void vtd_handle_inv_queue_error(IntelIOMMUState *s)
{
uint32_t fsts_reg = vtd_get_long_raw(s, DMAR_FSTS_REG);
vtd_set_clear_mask_long(s, DMAR_FSTS_REG, 0, VTD_FSTS_IQE);
vtd_generate_fault_event(s, fsts_reg);
}
/* Set the IWC field and try to generate an invalidation completion interrupt */
static void vtd_generate_completion_event(IntelIOMMUState *s)
{
if (vtd_get_long_raw(s, DMAR_ICS_REG) & VTD_ICS_IWC) {
trace_vtd_inv_desc_wait_irq("One pending, skip current");
return;
}
vtd_set_clear_mask_long(s, DMAR_ICS_REG, 0, VTD_ICS_IWC);
vtd_set_clear_mask_long(s, DMAR_IECTL_REG, 0, VTD_IECTL_IP);
if (vtd_get_long_raw(s, DMAR_IECTL_REG) & VTD_IECTL_IM) {
trace_vtd_inv_desc_wait_irq("IM in IECTL_REG is set, "
"new event not generated");
return;
} else {
/* Generate the interrupt event */
trace_vtd_inv_desc_wait_irq("Generating complete event");
vtd_generate_interrupt(s, DMAR_IEADDR_REG, DMAR_IEDATA_REG);
vtd_set_clear_mask_long(s, DMAR_IECTL_REG, VTD_IECTL_IP, 0);
}
}
static inline bool vtd_root_entry_present(IntelIOMMUState *s,
VTDRootEntry *re,
uint8_t devfn)
{
if (s->root_scalable && devfn > UINT8_MAX / 2) {
return re->hi & VTD_ROOT_ENTRY_P;
}
return re->lo & VTD_ROOT_ENTRY_P;
}
static int vtd_get_root_entry(IntelIOMMUState *s, uint8_t index,
VTDRootEntry *re)
{
dma_addr_t addr;
addr = s->root + index * sizeof(*re);
if (dma_memory_read(&address_space_memory, addr, re, sizeof(*re))) {
re->lo = 0;
return -VTD_FR_ROOT_TABLE_INV;
}
re->lo = le64_to_cpu(re->lo);
re->hi = le64_to_cpu(re->hi);
return 0;
}
static inline bool vtd_ce_present(VTDContextEntry *context)
{
return context->lo & VTD_CONTEXT_ENTRY_P;
}
static int vtd_get_context_entry_from_root(IntelIOMMUState *s,
VTDRootEntry *re,
uint8_t index,
VTDContextEntry *ce)
{
dma_addr_t addr, ce_size;
/* we have checked that root entry is present */
ce_size = s->root_scalable ? VTD_CTX_ENTRY_SCALABLE_SIZE :
VTD_CTX_ENTRY_LEGACY_SIZE;
if (s->root_scalable && index > UINT8_MAX / 2) {
index = index & (~VTD_DEVFN_CHECK_MASK);
addr = re->hi & VTD_ROOT_ENTRY_CTP;
} else {
addr = re->lo & VTD_ROOT_ENTRY_CTP;
}
addr = addr + index * ce_size;
if (dma_memory_read(&address_space_memory, addr, ce, ce_size)) {
return -VTD_FR_CONTEXT_TABLE_INV;
}
ce->lo = le64_to_cpu(ce->lo);
ce->hi = le64_to_cpu(ce->hi);
if (ce_size == VTD_CTX_ENTRY_SCALABLE_SIZE) {
ce->val[2] = le64_to_cpu(ce->val[2]);
ce->val[3] = le64_to_cpu(ce->val[3]);
}
return 0;
}
static inline dma_addr_t vtd_ce_get_slpt_base(VTDContextEntry *ce)
{
return ce->lo & VTD_CONTEXT_ENTRY_SLPTPTR;
}
static inline uint64_t vtd_get_slpte_addr(uint64_t slpte, uint8_t aw)
{
return slpte & VTD_SL_PT_BASE_ADDR_MASK(aw);
}
/* Whether the pte indicates the address of the page frame */
static inline bool vtd_is_last_slpte(uint64_t slpte, uint32_t level)
{
return level == VTD_SL_PT_LEVEL || (slpte & VTD_SL_PT_PAGE_SIZE_MASK);
}
/* Get the content of a spte located in @base_addr[@index] */
static uint64_t vtd_get_slpte(dma_addr_t base_addr, uint32_t index)
{
uint64_t slpte;
assert(index < VTD_SL_PT_ENTRY_NR);
if (dma_memory_read(&address_space_memory,
base_addr + index * sizeof(slpte), &slpte,
sizeof(slpte))) {
slpte = (uint64_t)-1;
return slpte;
}
slpte = le64_to_cpu(slpte);
return slpte;
}
/* Given an iova and the level of paging structure, return the offset
* of current level.
*/
static inline uint32_t vtd_iova_level_offset(uint64_t iova, uint32_t level)
{
return (iova >> vtd_slpt_level_shift(level)) &
((1ULL << VTD_SL_LEVEL_BITS) - 1);
}
/* Check Capability Register to see if the @level of page-table is supported */
static inline bool vtd_is_level_supported(IntelIOMMUState *s, uint32_t level)
{
return VTD_CAP_SAGAW_MASK & s->cap &
(1ULL << (level - 2 + VTD_CAP_SAGAW_SHIFT));
}
/* Return true if check passed, otherwise false */
static inline bool vtd_pe_type_check(X86IOMMUState *x86_iommu,
VTDPASIDEntry *pe)
{
switch (VTD_PE_GET_TYPE(pe)) {
case VTD_SM_PASID_ENTRY_FLT:
case VTD_SM_PASID_ENTRY_SLT:
case VTD_SM_PASID_ENTRY_NESTED:
break;
case VTD_SM_PASID_ENTRY_PT:
if (!x86_iommu->pt_supported) {
return false;
}
break;
default:
/* Unknwon type */
return false;
}
return true;
}
static inline bool vtd_pdire_present(VTDPASIDDirEntry *pdire)
{
return pdire->val & 1;
}
/**
* Caller of this function should check present bit if wants
* to use pdir entry for futher usage except for fpd bit check.
*/
static int vtd_get_pdire_from_pdir_table(dma_addr_t pasid_dir_base,
uint32_t pasid,
VTDPASIDDirEntry *pdire)
{
uint32_t index;
dma_addr_t addr, entry_size;
index = VTD_PASID_DIR_INDEX(pasid);
entry_size = VTD_PASID_DIR_ENTRY_SIZE;
addr = pasid_dir_base + index * entry_size;
if (dma_memory_read(&address_space_memory, addr, pdire, entry_size)) {
return -VTD_FR_PASID_TABLE_INV;
}
return 0;
}
static inline bool vtd_pe_present(VTDPASIDEntry *pe)
{
return pe->val[0] & VTD_PASID_ENTRY_P;
}
static int vtd_get_pe_in_pasid_leaf_table(IntelIOMMUState *s,
uint32_t pasid,
dma_addr_t addr,
VTDPASIDEntry *pe)
{
uint32_t index;
dma_addr_t entry_size;
X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(s);
index = VTD_PASID_TABLE_INDEX(pasid);
entry_size = VTD_PASID_ENTRY_SIZE;
addr = addr + index * entry_size;
if (dma_memory_read(&address_space_memory, addr, pe, entry_size)) {
return -VTD_FR_PASID_TABLE_INV;
}
/* Do translation type check */
if (!vtd_pe_type_check(x86_iommu, pe)) {
return -VTD_FR_PASID_TABLE_INV;
}
if (!vtd_is_level_supported(s, VTD_PE_GET_LEVEL(pe))) {
return -VTD_FR_PASID_TABLE_INV;
}
return 0;
}
/**
* Caller of this function should check present bit if wants
* to use pasid entry for futher usage except for fpd bit check.
*/
static int vtd_get_pe_from_pdire(IntelIOMMUState *s,
uint32_t pasid,
VTDPASIDDirEntry *pdire,
VTDPASIDEntry *pe)
{
dma_addr_t addr = pdire->val & VTD_PASID_TABLE_BASE_ADDR_MASK;
return vtd_get_pe_in_pasid_leaf_table(s, pasid, addr, pe);
}
/**
* This function gets a pasid entry from a specified pasid
* table (includes dir and leaf table) with a specified pasid.
* Sanity check should be done to ensure return a present
* pasid entry to caller.
*/
static int vtd_get_pe_from_pasid_table(IntelIOMMUState *s,
dma_addr_t pasid_dir_base,
uint32_t pasid,
VTDPASIDEntry *pe)
{
int ret;
VTDPASIDDirEntry pdire;
ret = vtd_get_pdire_from_pdir_table(pasid_dir_base,
pasid, &pdire);
if (ret) {
return ret;
}
if (!vtd_pdire_present(&pdire)) {
return -VTD_FR_PASID_TABLE_INV;
}
ret = vtd_get_pe_from_pdire(s, pasid, &pdire, pe);
if (ret) {
return ret;
}
if (!vtd_pe_present(pe)) {
return -VTD_FR_PASID_TABLE_INV;
}
return 0;
}
static int vtd_ce_get_rid2pasid_entry(IntelIOMMUState *s,
VTDContextEntry *ce,
VTDPASIDEntry *pe)
{
uint32_t pasid;
dma_addr_t pasid_dir_base;
int ret = 0;
pasid = VTD_CE_GET_RID2PASID(ce);
pasid_dir_base = VTD_CE_GET_PASID_DIR_TABLE(ce);
ret = vtd_get_pe_from_pasid_table(s, pasid_dir_base, pasid, pe);
return ret;
}
static int vtd_ce_get_pasid_fpd(IntelIOMMUState *s,
VTDContextEntry *ce,
bool *pe_fpd_set)
{
int ret;
uint32_t pasid;
dma_addr_t pasid_dir_base;
VTDPASIDDirEntry pdire;
VTDPASIDEntry pe;
pasid = VTD_CE_GET_RID2PASID(ce);
pasid_dir_base = VTD_CE_GET_PASID_DIR_TABLE(ce);
/*
* No present bit check since fpd is meaningful even
* if the present bit is clear.
*/
ret = vtd_get_pdire_from_pdir_table(pasid_dir_base, pasid, &pdire);
if (ret) {
return ret;
}
if (pdire.val & VTD_PASID_DIR_FPD) {
*pe_fpd_set = true;
return 0;
}
if (!vtd_pdire_present(&pdire)) {
return -VTD_FR_PASID_TABLE_INV;
}
/*
* No present bit check since fpd is meaningful even
* if the present bit is clear.
*/
ret = vtd_get_pe_from_pdire(s, pasid, &pdire, &pe);
if (ret) {
return ret;
}
if (pe.val[0] & VTD_PASID_ENTRY_FPD) {
*pe_fpd_set = true;
}
return 0;
}
/* Get the page-table level that hardware should use for the second-level
* page-table walk from the Address Width field of context-entry.
*/
static inline uint32_t vtd_ce_get_level(VTDContextEntry *ce)
{
return 2 + (ce->hi & VTD_CONTEXT_ENTRY_AW);
}
static uint32_t vtd_get_iova_level(IntelIOMMUState *s,
VTDContextEntry *ce)
{
VTDPASIDEntry pe;
if (s->root_scalable) {
vtd_ce_get_rid2pasid_entry(s, ce, &pe);
return VTD_PE_GET_LEVEL(&pe);
}
return vtd_ce_get_level(ce);
}
static inline uint32_t vtd_ce_get_agaw(VTDContextEntry *ce)
{
return 30 + (ce->hi & VTD_CONTEXT_ENTRY_AW) * 9;
}
static uint32_t vtd_get_iova_agaw(IntelIOMMUState *s,
VTDContextEntry *ce)
{
VTDPASIDEntry pe;
if (s->root_scalable) {
vtd_ce_get_rid2pasid_entry(s, ce, &pe);
return 30 + ((pe.val[0] >> 2) & VTD_SM_PASID_ENTRY_AW) * 9;
}
return vtd_ce_get_agaw(ce);
}
static inline uint32_t vtd_ce_get_type(VTDContextEntry *ce)
{
return ce->lo & VTD_CONTEXT_ENTRY_TT;
}
/* Only for Legacy Mode. Return true if check passed, otherwise false */
static inline bool vtd_ce_type_check(X86IOMMUState *x86_iommu,
VTDContextEntry *ce)
{
switch (vtd_ce_get_type(ce)) {
case VTD_CONTEXT_TT_MULTI_LEVEL:
/* Always supported */
break;
case VTD_CONTEXT_TT_DEV_IOTLB:
if (!x86_iommu->dt_supported) {
error_report_once("%s: DT specified but not supported", __func__);
return false;
}
break;
case VTD_CONTEXT_TT_PASS_THROUGH:
if (!x86_iommu->pt_supported) {
error_report_once("%s: PT specified but not supported", __func__);
return false;
}
break;
default:
/* Unknown type */
error_report_once("%s: unknown ce type: %"PRIu32, __func__,
vtd_ce_get_type(ce));
return false;
}
return true;
}
static inline uint64_t vtd_iova_limit(IntelIOMMUState *s,
VTDContextEntry *ce, uint8_t aw)
{
uint32_t ce_agaw = vtd_get_iova_agaw(s, ce);
return 1ULL << MIN(ce_agaw, aw);
}
/* Return true if IOVA passes range check, otherwise false. */
static inline bool vtd_iova_range_check(IntelIOMMUState *s,
uint64_t iova, VTDContextEntry *ce,
uint8_t aw)
{
/*
* Check if @iova is above 2^X-1, where X is the minimum of MGAW
* in CAP_REG and AW in context-entry.
*/
return !(iova & ~(vtd_iova_limit(s, ce, aw) - 1));
}
static dma_addr_t vtd_get_iova_pgtbl_base(IntelIOMMUState *s,
VTDContextEntry *ce)
{
VTDPASIDEntry pe;
if (s->root_scalable) {
vtd_ce_get_rid2pasid_entry(s, ce, &pe);
return pe.val[0] & VTD_SM_PASID_ENTRY_SLPTPTR;
}
return vtd_ce_get_slpt_base(ce);
}
/*
* Rsvd field masks for spte:
* vtd_spte_rsvd 4k pages
* vtd_spte_rsvd_large large pages
*/
static uint64_t vtd_spte_rsvd[5];
static uint64_t vtd_spte_rsvd_large[5];
static bool vtd_slpte_nonzero_rsvd(uint64_t slpte, uint32_t level)
{
uint64_t rsvd_mask = vtd_spte_rsvd[level];
if ((level == VTD_SL_PD_LEVEL || level == VTD_SL_PDP_LEVEL) &&
(slpte & VTD_SL_PT_PAGE_SIZE_MASK)) {
/* large page */
rsvd_mask = vtd_spte_rsvd_large[level];
}
return slpte & rsvd_mask;
}
/* Find the VTD address space associated with a given bus number */
static VTDBus *vtd_find_as_from_bus_num(IntelIOMMUState *s, uint8_t bus_num)
{
VTDBus *vtd_bus = s->vtd_as_by_bus_num[bus_num];
GHashTableIter iter;
if (vtd_bus) {
return vtd_bus;
}
/*
* Iterate over the registered buses to find the one which
* currently holds this bus number and update the bus_num
* lookup table.
*/
g_hash_table_iter_init(&iter, s->vtd_as_by_busptr);
while (g_hash_table_iter_next(&iter, NULL, (void **)&vtd_bus)) {
if (pci_bus_num(vtd_bus->bus) == bus_num) {
s->vtd_as_by_bus_num[bus_num] = vtd_bus;
return vtd_bus;
}
}
return NULL;
}
/* Given the @iova, get relevant @slptep. @slpte_level will be the last level
* of the translation, can be used for deciding the size of large page.
*/
static int vtd_iova_to_slpte(IntelIOMMUState *s, VTDContextEntry *ce,
uint64_t iova, bool is_write,
uint64_t *slptep, uint32_t *slpte_level,
bool *reads, bool *writes, uint8_t aw_bits)
{
dma_addr_t addr = vtd_get_iova_pgtbl_base(s, ce);
uint32_t level = vtd_get_iova_level(s, ce);
uint32_t offset;
uint64_t slpte;
uint64_t access_right_check;
if (!vtd_iova_range_check(s, iova, ce, aw_bits)) {
error_report_once("%s: detected IOVA overflow (iova=0x%" PRIx64 ")",
__func__, iova);
return -VTD_FR_ADDR_BEYOND_MGAW;
}
/* FIXME: what is the Atomics request here? */
access_right_check = is_write ? VTD_SL_W : VTD_SL_R;
while (true) {
offset = vtd_iova_level_offset(iova, level);
slpte = vtd_get_slpte(addr, offset);
if (slpte == (uint64_t)-1) {
error_report_once("%s: detected read error on DMAR slpte "
"(iova=0x%" PRIx64 ")", __func__, iova);
if (level == vtd_get_iova_level(s, ce)) {
/* Invalid programming of context-entry */
return -VTD_FR_CONTEXT_ENTRY_INV;
} else {
return -VTD_FR_PAGING_ENTRY_INV;
}
}
*reads = (*reads) && (slpte & VTD_SL_R);
*writes = (*writes) && (slpte & VTD_SL_W);
if (!(slpte & access_right_check)) {
error_report_once("%s: detected slpte permission error "
"(iova=0x%" PRIx64 ", level=0x%" PRIx32 ", "
"slpte=0x%" PRIx64 ", write=%d)", __func__,
iova, level, slpte, is_write);
return is_write ? -VTD_FR_WRITE : -VTD_FR_READ;
}
if (vtd_slpte_nonzero_rsvd(slpte, level)) {
error_report_once("%s: detected splte reserve non-zero "
"iova=0x%" PRIx64 ", level=0x%" PRIx32
"slpte=0x%" PRIx64 ")", __func__, iova,
level, slpte);
return -VTD_FR_PAGING_ENTRY_RSVD;
}
if (vtd_is_last_slpte(slpte, level)) {
*slptep = slpte;
*slpte_level = level;
return 0;
}
addr = vtd_get_slpte_addr(slpte, aw_bits);
level--;
}
}
typedef int (*vtd_page_walk_hook)(IOMMUTLBEvent *event, void *private);
/**
* Constant information used during page walking
*
* @hook_fn: hook func to be called when detected page
* @private: private data to be passed into hook func
* @notify_unmap: whether we should notify invalid entries
* @as: VT-d address space of the device
* @aw: maximum address width
* @domain: domain ID of the page walk
*/
typedef struct {
VTDAddressSpace *as;
vtd_page_walk_hook hook_fn;
void *private;
bool notify_unmap;
uint8_t aw;
uint16_t domain_id;
} vtd_page_walk_info;
static int vtd_page_walk_one(IOMMUTLBEvent *event, vtd_page_walk_info *info)
intel-iommu: send PSI always even if across PDEs SECURITY IMPLICATION: without this patch, any guest with both assigned device and a vIOMMU might encounter stale IO page mappings even if guest has already unmapped the page, which may lead to guest memory corruption. The stale mappings will only be limited to the guest's own memory range, so it should not affect the host memory or other guests on the host. During IOVA page table walking, there is a special case when the PSI covers one whole PDE (Page Directory Entry, which contains 512 Page Table Entries) or more. In the past, we skip that entry and we don't notify the IOMMU notifiers. This is not correct. We should send UNMAP notification to registered UNMAP notifiers in this case. For UNMAP only notifiers, this might cause IOTLBs cached in the devices even if they were already invalid. For MAP/UNMAP notifiers like vfio-pci, this will cause stale page mappings. This special case doesn't trigger often, but it is very easy to be triggered by nested device assignments, since in that case we'll possibly map the whole L2 guest RAM region into the device's IOVA address space (several GBs at least), which is far bigger than normal kernel driver usages of the device (tens of MBs normally). Without this patch applied to L1 QEMU, nested device assignment to L2 guests will dump some errors like: qemu-system-x86_64: VFIO_MAP_DMA: -17 qemu-system-x86_64: vfio_dma_map(0x557305420c30, 0xad000, 0x1000, 0x7f89a920d000) = -17 (File exists) CC: QEMU Stable <qemu-stable@nongnu.org> Acked-by: Jason Wang <jasowang@redhat.com> [peterx: rewrite the commit message] Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:09 +03:00
{
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
VTDAddressSpace *as = info->as;
vtd_page_walk_hook hook_fn = info->hook_fn;
void *private = info->private;
IOMMUTLBEntry *entry = &event->entry;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
DMAMap target = {
.iova = entry->iova,
.size = entry->addr_mask,
.translated_addr = entry->translated_addr,
.perm = entry->perm,
};
DMAMap *mapped = iova_tree_find(as->iova_tree, &target);
if (event->type == IOMMU_NOTIFIER_UNMAP && !info->notify_unmap) {
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
trace_vtd_page_walk_one_skip_unmap(entry->iova, entry->addr_mask);
return 0;
}
intel-iommu: send PSI always even if across PDEs SECURITY IMPLICATION: without this patch, any guest with both assigned device and a vIOMMU might encounter stale IO page mappings even if guest has already unmapped the page, which may lead to guest memory corruption. The stale mappings will only be limited to the guest's own memory range, so it should not affect the host memory or other guests on the host. During IOVA page table walking, there is a special case when the PSI covers one whole PDE (Page Directory Entry, which contains 512 Page Table Entries) or more. In the past, we skip that entry and we don't notify the IOMMU notifiers. This is not correct. We should send UNMAP notification to registered UNMAP notifiers in this case. For UNMAP only notifiers, this might cause IOTLBs cached in the devices even if they were already invalid. For MAP/UNMAP notifiers like vfio-pci, this will cause stale page mappings. This special case doesn't trigger often, but it is very easy to be triggered by nested device assignments, since in that case we'll possibly map the whole L2 guest RAM region into the device's IOVA address space (several GBs at least), which is far bigger than normal kernel driver usages of the device (tens of MBs normally). Without this patch applied to L1 QEMU, nested device assignment to L2 guests will dump some errors like: qemu-system-x86_64: VFIO_MAP_DMA: -17 qemu-system-x86_64: vfio_dma_map(0x557305420c30, 0xad000, 0x1000, 0x7f89a920d000) = -17 (File exists) CC: QEMU Stable <qemu-stable@nongnu.org> Acked-by: Jason Wang <jasowang@redhat.com> [peterx: rewrite the commit message] Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:09 +03:00
assert(hook_fn);
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
/* Update local IOVA mapped ranges */
if (event->type == IOMMU_NOTIFIER_MAP) {
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
if (mapped) {
/* If it's exactly the same translation, skip */
if (!memcmp(mapped, &target, sizeof(target))) {
trace_vtd_page_walk_one_skip_map(entry->iova, entry->addr_mask,
entry->translated_addr);
return 0;
} else {
/*
* Translation changed. Normally this should not
* happen, but it can happen when with buggy guest
* OSes. Note that there will be a small window that
* we don't have map at all. But that's the best
* effort we can do. The ideal way to emulate this is
* atomically modify the PTE to follow what has
* changed, but we can't. One example is that vfio
* driver only has VFIO_IOMMU_[UN]MAP_DMA but no
* interface to modify a mapping (meanwhile it seems
* meaningless to even provide one). Anyway, let's
* mark this as a TODO in case one day we'll have
* a better solution.
*/
IOMMUAccessFlags cache_perm = entry->perm;
int ret;
/* Emulate an UNMAP */
event->type = IOMMU_NOTIFIER_UNMAP;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
entry->perm = IOMMU_NONE;
trace_vtd_page_walk_one(info->domain_id,
entry->iova,
entry->translated_addr,
entry->addr_mask,
entry->perm);
ret = hook_fn(event, private);
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
if (ret) {
return ret;
}
/* Drop any existing mapping */
iova_tree_remove(as->iova_tree, &target);
/* Recover the correct type */
event->type = IOMMU_NOTIFIER_MAP;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
entry->perm = cache_perm;
}
}
iova_tree_insert(as->iova_tree, &target);
} else {
if (!mapped) {
/* Skip since we didn't map this range at all */
trace_vtd_page_walk_one_skip_unmap(entry->iova, entry->addr_mask);
return 0;
}
iova_tree_remove(as->iova_tree, &target);
}
trace_vtd_page_walk_one(info->domain_id, entry->iova,
entry->translated_addr, entry->addr_mask,
entry->perm);
return hook_fn(event, private);
intel-iommu: send PSI always even if across PDEs SECURITY IMPLICATION: without this patch, any guest with both assigned device and a vIOMMU might encounter stale IO page mappings even if guest has already unmapped the page, which may lead to guest memory corruption. The stale mappings will only be limited to the guest's own memory range, so it should not affect the host memory or other guests on the host. During IOVA page table walking, there is a special case when the PSI covers one whole PDE (Page Directory Entry, which contains 512 Page Table Entries) or more. In the past, we skip that entry and we don't notify the IOMMU notifiers. This is not correct. We should send UNMAP notification to registered UNMAP notifiers in this case. For UNMAP only notifiers, this might cause IOTLBs cached in the devices even if they were already invalid. For MAP/UNMAP notifiers like vfio-pci, this will cause stale page mappings. This special case doesn't trigger often, but it is very easy to be triggered by nested device assignments, since in that case we'll possibly map the whole L2 guest RAM region into the device's IOVA address space (several GBs at least), which is far bigger than normal kernel driver usages of the device (tens of MBs normally). Without this patch applied to L1 QEMU, nested device assignment to L2 guests will dump some errors like: qemu-system-x86_64: VFIO_MAP_DMA: -17 qemu-system-x86_64: vfio_dma_map(0x557305420c30, 0xad000, 0x1000, 0x7f89a920d000) = -17 (File exists) CC: QEMU Stable <qemu-stable@nongnu.org> Acked-by: Jason Wang <jasowang@redhat.com> [peterx: rewrite the commit message] Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:09 +03:00
}
/**
* vtd_page_walk_level - walk over specific level for IOVA range
*
* @addr: base GPA addr to start the walk
* @start: IOVA range start address
* @end: IOVA range end address (start <= addr < end)
* @read: whether parent level has read permission
* @write: whether parent level has write permission
* @info: constant information for the page walk
*/
static int vtd_page_walk_level(dma_addr_t addr, uint64_t start,
uint64_t end, uint32_t level, bool read,
bool write, vtd_page_walk_info *info)
{
bool read_cur, write_cur, entry_valid;
uint32_t offset;
uint64_t slpte;
uint64_t subpage_size, subpage_mask;
IOMMUTLBEvent event;
uint64_t iova = start;
uint64_t iova_next;
int ret = 0;
trace_vtd_page_walk_level(addr, level, start, end);
subpage_size = 1ULL << vtd_slpt_level_shift(level);
subpage_mask = vtd_slpt_level_page_mask(level);
while (iova < end) {
iova_next = (iova & subpage_mask) + subpage_size;
offset = vtd_iova_level_offset(iova, level);
slpte = vtd_get_slpte(addr, offset);
if (slpte == (uint64_t)-1) {
trace_vtd_page_walk_skip_read(iova, iova_next);
goto next;
}
if (vtd_slpte_nonzero_rsvd(slpte, level)) {
trace_vtd_page_walk_skip_reserve(iova, iova_next);
goto next;
}
/* Permissions are stacked with parents' */
read_cur = read && (slpte & VTD_SL_R);
write_cur = write && (slpte & VTD_SL_W);
/*
* As long as we have either read/write permission, this is a
* valid entry. The rule works for both page entries and page
* table entries.
*/
entry_valid = read_cur | write_cur;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
if (!vtd_is_last_slpte(slpte, level) && entry_valid) {
/*
* This is a valid PDE (or even bigger than PDE). We need
* to walk one further level.
*/
ret = vtd_page_walk_level(vtd_get_slpte_addr(slpte, info->aw),
iova, MIN(iova_next, end), level - 1,
read_cur, write_cur, info);
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
} else {
/*
* This means we are either:
*
* (1) the real page entry (either 4K page, or huge page)
* (2) the whole range is invalid
*
* In either case, we send an IOTLB notification down.
*/
event.entry.target_as = &address_space_memory;
event.entry.iova = iova & subpage_mask;
event.entry.perm = IOMMU_ACCESS_FLAG(read_cur, write_cur);
event.entry.addr_mask = ~subpage_mask;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
/* NOTE: this is only meaningful if entry_valid == true */
event.entry.translated_addr = vtd_get_slpte_addr(slpte, info->aw);
event.type = event.entry.perm ? IOMMU_NOTIFIER_MAP :
IOMMU_NOTIFIER_UNMAP;
ret = vtd_page_walk_one(&event, info);
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
}
if (ret < 0) {
return ret;
}
next:
iova = iova_next;
}
return 0;
}
/**
* vtd_page_walk - walk specific IOVA range, and call the hook
*
* @s: intel iommu state
* @ce: context entry to walk upon
* @start: IOVA address to start the walk
* @end: IOVA range end address (start <= addr < end)
* @info: page walking information struct
*/
static int vtd_page_walk(IntelIOMMUState *s, VTDContextEntry *ce,
uint64_t start, uint64_t end,
vtd_page_walk_info *info)
{
dma_addr_t addr = vtd_get_iova_pgtbl_base(s, ce);
uint32_t level = vtd_get_iova_level(s, ce);
if (!vtd_iova_range_check(s, start, ce, info->aw)) {
return -VTD_FR_ADDR_BEYOND_MGAW;
}
if (!vtd_iova_range_check(s, end, ce, info->aw)) {
/* Fix end so that it reaches the maximum */
end = vtd_iova_limit(s, ce, info->aw);
}
return vtd_page_walk_level(addr, start, end, level, true, true, info);
}
static int vtd_root_entry_rsvd_bits_check(IntelIOMMUState *s,
VTDRootEntry *re)
{
/* Legacy Mode reserved bits check */
if (!s->root_scalable &&
(re->hi || (re->lo & VTD_ROOT_ENTRY_RSVD(s->aw_bits))))
goto rsvd_err;
/* Scalable Mode reserved bits check */
if (s->root_scalable &&
((re->lo & VTD_ROOT_ENTRY_RSVD(s->aw_bits)) ||
(re->hi & VTD_ROOT_ENTRY_RSVD(s->aw_bits))))
goto rsvd_err;
return 0;
rsvd_err:
error_report_once("%s: invalid root entry: hi=0x%"PRIx64
", lo=0x%"PRIx64,
__func__, re->hi, re->lo);
return -VTD_FR_ROOT_ENTRY_RSVD;
}
static inline int vtd_context_entry_rsvd_bits_check(IntelIOMMUState *s,
VTDContextEntry *ce)
{
if (!s->root_scalable &&
(ce->hi & VTD_CONTEXT_ENTRY_RSVD_HI ||
ce->lo & VTD_CONTEXT_ENTRY_RSVD_LO(s->aw_bits))) {
error_report_once("%s: invalid context entry: hi=%"PRIx64
", lo=%"PRIx64" (reserved nonzero)",
__func__, ce->hi, ce->lo);
return -VTD_FR_CONTEXT_ENTRY_RSVD;
}
if (s->root_scalable &&
(ce->val[0] & VTD_SM_CONTEXT_ENTRY_RSVD_VAL0(s->aw_bits) ||
ce->val[1] & VTD_SM_CONTEXT_ENTRY_RSVD_VAL1 ||
ce->val[2] ||
ce->val[3])) {
error_report_once("%s: invalid context entry: val[3]=%"PRIx64
", val[2]=%"PRIx64
", val[1]=%"PRIx64
", val[0]=%"PRIx64" (reserved nonzero)",
__func__, ce->val[3], ce->val[2],
ce->val[1], ce->val[0]);
return -VTD_FR_CONTEXT_ENTRY_RSVD;
}
return 0;
}
static int vtd_ce_rid2pasid_check(IntelIOMMUState *s,
VTDContextEntry *ce)
{
VTDPASIDEntry pe;
/*
* Make sure in Scalable Mode, a present context entry
* has valid rid2pasid setting, which includes valid
* rid2pasid field and corresponding pasid entry setting
*/
return vtd_ce_get_rid2pasid_entry(s, ce, &pe);
}
/* Map a device to its corresponding domain (context-entry) */
static int vtd_dev_to_context_entry(IntelIOMMUState *s, uint8_t bus_num,
uint8_t devfn, VTDContextEntry *ce)
{
VTDRootEntry re;
int ret_fr;
X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(s);
ret_fr = vtd_get_root_entry(s, bus_num, &re);
if (ret_fr) {
return ret_fr;
}
if (!vtd_root_entry_present(s, &re, devfn)) {
/* Not error - it's okay we don't have root entry. */
trace_vtd_re_not_present(bus_num);
return -VTD_FR_ROOT_ENTRY_P;
}
ret_fr = vtd_root_entry_rsvd_bits_check(s, &re);
if (ret_fr) {
return ret_fr;
}
ret_fr = vtd_get_context_entry_from_root(s, &re, devfn, ce);
if (ret_fr) {
return ret_fr;
}
if (!vtd_ce_present(ce)) {
/* Not error - it's okay we don't have context entry. */
trace_vtd_ce_not_present(bus_num, devfn);
return -VTD_FR_CONTEXT_ENTRY_P;
}
ret_fr = vtd_context_entry_rsvd_bits_check(s, ce);
if (ret_fr) {
return ret_fr;
}
/* Check if the programming of context-entry is valid */
if (!s->root_scalable &&
!vtd_is_level_supported(s, vtd_ce_get_level(ce))) {
error_report_once("%s: invalid context entry: hi=%"PRIx64
", lo=%"PRIx64" (level %d not supported)",
__func__, ce->hi, ce->lo,
vtd_ce_get_level(ce));
return -VTD_FR_CONTEXT_ENTRY_INV;
}
if (!s->root_scalable) {
/* Do translation type check */
if (!vtd_ce_type_check(x86_iommu, ce)) {
/* Errors dumped in vtd_ce_type_check() */
return -VTD_FR_CONTEXT_ENTRY_INV;
}
} else {
/*
* Check if the programming of context-entry.rid2pasid
* and corresponding pasid setting is valid, and thus
* avoids to check pasid entry fetching result in future
* helper function calling.
*/
ret_fr = vtd_ce_rid2pasid_check(s, ce);
if (ret_fr) {
return ret_fr;
}
}
return 0;
}
static int vtd_sync_shadow_page_hook(IOMMUTLBEvent *event,
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
void *private)
{
memory_region_notify_iommu(private, 0, *event);
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
return 0;
}
static uint16_t vtd_get_domain_id(IntelIOMMUState *s,
VTDContextEntry *ce)
{
VTDPASIDEntry pe;
if (s->root_scalable) {
vtd_ce_get_rid2pasid_entry(s, ce, &pe);
return VTD_SM_PASID_ENTRY_DID(pe.val[1]);
}
return VTD_CONTEXT_ENTRY_DID(ce->hi);
}
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
static int vtd_sync_shadow_page_table_range(VTDAddressSpace *vtd_as,
VTDContextEntry *ce,
hwaddr addr, hwaddr size)
{
IntelIOMMUState *s = vtd_as->iommu_state;
vtd_page_walk_info info = {
.hook_fn = vtd_sync_shadow_page_hook,
.private = (void *)&vtd_as->iommu,
.notify_unmap = true,
.aw = s->aw_bits,
.as = vtd_as,
.domain_id = vtd_get_domain_id(s, ce),
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
};
return vtd_page_walk(s, ce, addr, addr + size, &info);
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
}
static int vtd_sync_shadow_page_table(VTDAddressSpace *vtd_as)
{
int ret;
VTDContextEntry ce;
IOMMUNotifier *n;
if (!(vtd_as->iommu.iommu_notify_flags & IOMMU_NOTIFIER_IOTLB_EVENTS)) {
return 0;
}
ret = vtd_dev_to_context_entry(vtd_as->iommu_state,
pci_bus_num(vtd_as->bus),
vtd_as->devfn, &ce);
if (ret) {
if (ret == -VTD_FR_CONTEXT_ENTRY_P) {
/*
* It's a valid scenario to have a context entry that is
* not present. For example, when a device is removed
* from an existing domain then the context entry will be
* zeroed by the guest before it was put into another
* domain. When this happens, instead of synchronizing
* the shadow pages we should invalidate all existing
* mappings and notify the backends.
*/
IOMMU_NOTIFIER_FOREACH(n, &vtd_as->iommu) {
vtd_address_space_unmap(vtd_as, n);
}
ret = 0;
}
return ret;
}
return vtd_sync_shadow_page_table_range(vtd_as, &ce, 0, UINT64_MAX);
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
}
/*
* Check if specific device is configed to bypass address
* translation for DMA requests. In Scalable Mode, bypass
* 1st-level translation or 2nd-level translation, it depends
* on PGTT setting.
*/
static bool vtd_dev_pt_enabled(VTDAddressSpace *as)
{
IntelIOMMUState *s;
VTDContextEntry ce;
VTDPASIDEntry pe;
int ret;
assert(as);
s = as->iommu_state;
ret = vtd_dev_to_context_entry(s, pci_bus_num(as->bus),
as->devfn, &ce);
if (ret) {
/*
* Possibly failed to parse the context entry for some reason
* (e.g., during init, or any guest configuration errors on
* context entries). We should assume PT not enabled for
* safety.
*/
return false;
}
if (s->root_scalable) {
ret = vtd_ce_get_rid2pasid_entry(s, &ce, &pe);
if (ret) {
error_report_once("%s: vtd_ce_get_rid2pasid_entry error: %"PRId32,
__func__, ret);
return false;
}
return (VTD_PE_GET_TYPE(&pe) == VTD_SM_PASID_ENTRY_PT);
}
return (vtd_ce_get_type(&ce) == VTD_CONTEXT_TT_PASS_THROUGH);
}
/* Return whether the device is using IOMMU translation. */
static bool vtd_switch_address_space(VTDAddressSpace *as)
{
bool use_iommu;
/* Whether we need to take the BQL on our own */
bool take_bql = !qemu_mutex_iothread_locked();
assert(as);
use_iommu = as->iommu_state->dmar_enabled && !vtd_dev_pt_enabled(as);
trace_vtd_switch_address_space(pci_bus_num(as->bus),
VTD_PCI_SLOT(as->devfn),
VTD_PCI_FUNC(as->devfn),
use_iommu);
/*
* It's possible that we reach here without BQL, e.g., when called
* from vtd_pt_enable_fast_path(). However the memory APIs need
* it. We'd better make sure we have had it already, or, take it.
*/
if (take_bql) {
qemu_mutex_lock_iothread();
}
/* Turn off first then on the other */
if (use_iommu) {
memory_region_set_enabled(&as->nodmar, false);
memory_region_set_enabled(MEMORY_REGION(&as->iommu), true);
} else {
memory_region_set_enabled(MEMORY_REGION(&as->iommu), false);
memory_region_set_enabled(&as->nodmar, true);
}
if (take_bql) {
qemu_mutex_unlock_iothread();
}
return use_iommu;
}
static void vtd_switch_address_space_all(IntelIOMMUState *s)
{
GHashTableIter iter;
VTDBus *vtd_bus;
int i;
g_hash_table_iter_init(&iter, s->vtd_as_by_busptr);
while (g_hash_table_iter_next(&iter, NULL, (void **)&vtd_bus)) {
for (i = 0; i < PCI_DEVFN_MAX; i++) {
if (!vtd_bus->dev_as[i]) {
continue;
}
vtd_switch_address_space(vtd_bus->dev_as[i]);
}
}
}
static inline uint16_t vtd_make_source_id(uint8_t bus_num, uint8_t devfn)
{
return ((bus_num & 0xffUL) << 8) | (devfn & 0xffUL);
}
static const bool vtd_qualified_faults[] = {
[VTD_FR_RESERVED] = false,
[VTD_FR_ROOT_ENTRY_P] = false,
[VTD_FR_CONTEXT_ENTRY_P] = true,
[VTD_FR_CONTEXT_ENTRY_INV] = true,
[VTD_FR_ADDR_BEYOND_MGAW] = true,
[VTD_FR_WRITE] = true,
[VTD_FR_READ] = true,
[VTD_FR_PAGING_ENTRY_INV] = true,
[VTD_FR_ROOT_TABLE_INV] = false,
[VTD_FR_CONTEXT_TABLE_INV] = false,
[VTD_FR_ROOT_ENTRY_RSVD] = false,
[VTD_FR_PAGING_ENTRY_RSVD] = true,
[VTD_FR_CONTEXT_ENTRY_TT] = true,
[VTD_FR_PASID_TABLE_INV] = false,
[VTD_FR_RESERVED_ERR] = false,
[VTD_FR_MAX] = false,
};
/* To see if a fault condition is "qualified", which is reported to software
* only if the FPD field in the context-entry used to process the faulting
* request is 0.
*/
static inline bool vtd_is_qualified_fault(VTDFaultReason fault)
{
return vtd_qualified_faults[fault];
}
static inline bool vtd_is_interrupt_addr(hwaddr addr)
{
return VTD_INTERRUPT_ADDR_FIRST <= addr && addr <= VTD_INTERRUPT_ADDR_LAST;
}
static void vtd_pt_enable_fast_path(IntelIOMMUState *s, uint16_t source_id)
{
VTDBus *vtd_bus;
VTDAddressSpace *vtd_as;
bool success = false;
vtd_bus = vtd_find_as_from_bus_num(s, VTD_SID_TO_BUS(source_id));
if (!vtd_bus) {
goto out;
}
vtd_as = vtd_bus->dev_as[VTD_SID_TO_DEVFN(source_id)];
if (!vtd_as) {
goto out;
}
if (vtd_switch_address_space(vtd_as) == false) {
/* We switched off IOMMU region successfully. */
success = true;
}
out:
trace_vtd_pt_enable_fast_path(source_id, success);
}
/* Map dev to context-entry then do a paging-structures walk to do a iommu
* translation.
*
* Called from RCU critical section.
*
* @bus_num: The bus number
* @devfn: The devfn, which is the combined of device and function number
* @is_write: The access is a write operation
* @entry: IOMMUTLBEntry that contain the addr to be translated and result
*
* Returns true if translation is successful, otherwise false.
*/
static bool vtd_do_iommu_translate(VTDAddressSpace *vtd_as, PCIBus *bus,
uint8_t devfn, hwaddr addr, bool is_write,
IOMMUTLBEntry *entry)
{
IntelIOMMUState *s = vtd_as->iommu_state;
VTDContextEntry ce;
uint8_t bus_num = pci_bus_num(bus);
VTDContextCacheEntry *cc_entry;
uint64_t slpte, page_mask;
uint32_t level;
uint16_t source_id = vtd_make_source_id(bus_num, devfn);
int ret_fr;
bool is_fpd_set = false;
bool reads = true;
bool writes = true;
uint8_t access_flags;
VTDIOTLBEntry *iotlb_entry;
/*
* We have standalone memory region for interrupt addresses, we
* should never receive translation requests in this region.
*/
assert(!vtd_is_interrupt_addr(addr));
vtd_iommu_lock(s);
cc_entry = &vtd_as->context_cache_entry;
/* Try to fetch slpte form IOTLB */
iotlb_entry = vtd_lookup_iotlb(s, source_id, addr);
if (iotlb_entry) {
trace_vtd_iotlb_page_hit(source_id, addr, iotlb_entry->slpte,
iotlb_entry->domain_id);
slpte = iotlb_entry->slpte;
access_flags = iotlb_entry->access_flags;
page_mask = iotlb_entry->mask;
goto out;
}
/* Try to fetch context-entry from cache first */
if (cc_entry->context_cache_gen == s->context_cache_gen) {
trace_vtd_iotlb_cc_hit(bus_num, devfn, cc_entry->context_entry.hi,
cc_entry->context_entry.lo,
cc_entry->context_cache_gen);
ce = cc_entry->context_entry;
is_fpd_set = ce.lo & VTD_CONTEXT_ENTRY_FPD;
if (!is_fpd_set && s->root_scalable) {
ret_fr = vtd_ce_get_pasid_fpd(s, &ce, &is_fpd_set);
VTD_PE_GET_FPD_ERR(ret_fr, is_fpd_set, s, source_id, addr, is_write);
}
} else {
ret_fr = vtd_dev_to_context_entry(s, bus_num, devfn, &ce);
is_fpd_set = ce.lo & VTD_CONTEXT_ENTRY_FPD;
if (!ret_fr && !is_fpd_set && s->root_scalable) {
ret_fr = vtd_ce_get_pasid_fpd(s, &ce, &is_fpd_set);
}
VTD_PE_GET_FPD_ERR(ret_fr, is_fpd_set, s, source_id, addr, is_write);
/* Update context-cache */
trace_vtd_iotlb_cc_update(bus_num, devfn, ce.hi, ce.lo,
cc_entry->context_cache_gen,
s->context_cache_gen);
cc_entry->context_entry = ce;
cc_entry->context_cache_gen = s->context_cache_gen;
}
/*
* We don't need to translate for pass-through context entries.
* Also, let's ignore IOTLB caching as well for PT devices.
*/
if (vtd_ce_get_type(&ce) == VTD_CONTEXT_TT_PASS_THROUGH) {
entry->iova = addr & VTD_PAGE_MASK_4K;
entry->translated_addr = entry->iova;
entry->addr_mask = ~VTD_PAGE_MASK_4K;
entry->perm = IOMMU_RW;
trace_vtd_translate_pt(source_id, entry->iova);
/*
* When this happens, it means firstly caching-mode is not
* enabled, and this is the first passthrough translation for
* the device. Let's enable the fast path for passthrough.
*
* When passthrough is disabled again for the device, we can
* capture it via the context entry invalidation, then the
* IOMMU region can be swapped back.
*/
vtd_pt_enable_fast_path(s, source_id);
vtd_iommu_unlock(s);
return true;
}
ret_fr = vtd_iova_to_slpte(s, &ce, addr, is_write, &slpte, &level,
&reads, &writes, s->aw_bits);
VTD_PE_GET_FPD_ERR(ret_fr, is_fpd_set, s, source_id, addr, is_write);
page_mask = vtd_slpt_level_page_mask(level);
access_flags = IOMMU_ACCESS_FLAG(reads, writes);
vtd_update_iotlb(s, source_id, vtd_get_domain_id(s, &ce), addr, slpte,
access_flags, level);
out:
vtd_iommu_unlock(s);
entry->iova = addr & page_mask;
entry->translated_addr = vtd_get_slpte_addr(slpte, s->aw_bits) & page_mask;
entry->addr_mask = ~page_mask;
entry->perm = access_flags;
return true;
error:
vtd_iommu_unlock(s);
entry->iova = 0;
entry->translated_addr = 0;
entry->addr_mask = 0;
entry->perm = IOMMU_NONE;
return false;
}
static void vtd_root_table_setup(IntelIOMMUState *s)
{
s->root = vtd_get_quad_raw(s, DMAR_RTADDR_REG);
s->root &= VTD_RTADDR_ADDR_MASK(s->aw_bits);
vtd_update_scalable_state(s);
trace_vtd_reg_dmar_root(s->root, s->root_scalable);
}
static void vtd_iec_notify_all(IntelIOMMUState *s, bool global,
uint32_t index, uint32_t mask)
{
x86_iommu_iec_notify_all(X86_IOMMU_DEVICE(s), global, index, mask);
}
static void vtd_interrupt_remap_table_setup(IntelIOMMUState *s)
{
uint64_t value = 0;
value = vtd_get_quad_raw(s, DMAR_IRTA_REG);
s->intr_size = 1UL << ((value & VTD_IRTA_SIZE_MASK) + 1);
s->intr_root = value & VTD_IRTA_ADDR_MASK(s->aw_bits);
s->intr_eime = value & VTD_IRTA_EIME;
/* Notify global invalidation */
vtd_iec_notify_all(s, true, 0, 0);
trace_vtd_reg_ir_root(s->intr_root, s->intr_size);
}
static void vtd_iommu_replay_all(IntelIOMMUState *s)
{
VTDAddressSpace *vtd_as;
QLIST_FOREACH(vtd_as, &s->vtd_as_with_notifiers, next) {
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
vtd_sync_shadow_page_table(vtd_as);
}
}
static void vtd_context_global_invalidate(IntelIOMMUState *s)
{
trace_vtd_inv_desc_cc_global();
/* Protects context cache */
vtd_iommu_lock(s);
s->context_cache_gen++;
if (s->context_cache_gen == VTD_CONTEXT_CACHE_GEN_MAX) {
vtd_reset_context_cache_locked(s);
}
vtd_iommu_unlock(s);
intel_iommu: better handling of dmar state switch QEMU is not handling the global DMAR switch well, especially when from "on" to "off". Let's first take the example of system reset. Assuming that a guest has IOMMU enabled. When it reboots, we will drop all the existing DMAR mappings to handle the system reset, however we'll still keep the existing memory layouts which has the IOMMU memory region enabled. So after the reboot and before the kernel reloads again, there will be no mapping at all for the host device. That's problematic since any software (for example, SeaBIOS) that runs earlier than the kernel after the reboot will assume the IOMMU is disabled, so any DMA from the software will fail. For example, a guest that boots on an assigned NVMe device might fail to find the boot device after a system reboot/reset and we'll be able to observe SeaBIOS errors if we capture the debugging log: WARNING - Timeout at nvme_wait:144! Meanwhile, we should see DMAR errors on the host of that NVMe device. It's the DMA fault that caused a NVMe driver timeout. The correct fix should be that we do proper switching of device DMA address spaces when system resets, which will setup correct memory regions and notify the backend of the devices. This might not affect much on non-assigned devices since QEMU VT-d emulation will assume a default passthrough mapping if DMAR is not enabled in the GCMD register (please refer to vtd_iommu_translate). However that's required for an assigned devices, since that'll rebuild the correct GPA to HPA mapping that is needed for any DMA operation during guest bootstrap. Besides the system reset, we have some other places that might change the global DMAR status and we'd better do the same thing there. For example, when we change the state of GCMD register, or the DMAR root pointer. Do the same refresh for all these places. For these two places we'll also need to explicitly invalidate the context entry cache and iotlb cache. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173 CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> -- v2: - do the same for GCMD write, or root pointer update [Alex] - test is carried out by me this time, by observing the vtd_switch_address_space tracepoint after system reboot v3: - rewrite commit message as suggested by Alex Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-29 06:36:15 +03:00
vtd_address_space_refresh_all(s);
/*
* From VT-d spec 6.5.2.1, a global context entry invalidation
* should be followed by a IOTLB global invalidation, so we should
* be safe even without this. Hoewever, let's replay the region as
* well to be safer, and go back here when we need finer tunes for
* VT-d emulation codes.
*/
vtd_iommu_replay_all(s);
}
/* Do a context-cache device-selective invalidation.
* @func_mask: FM field after shifting
*/
static void vtd_context_device_invalidate(IntelIOMMUState *s,
uint16_t source_id,
uint16_t func_mask)
{
uint16_t mask;
VTDBus *vtd_bus;
VTDAddressSpace *vtd_as;
uint8_t bus_n, devfn;
uint16_t devfn_it;
trace_vtd_inv_desc_cc_devices(source_id, func_mask);
switch (func_mask & 3) {
case 0:
mask = 0; /* No bits in the SID field masked */
break;
case 1:
mask = 4; /* Mask bit 2 in the SID field */
break;
case 2:
mask = 6; /* Mask bit 2:1 in the SID field */
break;
case 3:
mask = 7; /* Mask bit 2:0 in the SID field */
break;
}
mask = ~mask;
bus_n = VTD_SID_TO_BUS(source_id);
vtd_bus = vtd_find_as_from_bus_num(s, bus_n);
if (vtd_bus) {
devfn = VTD_SID_TO_DEVFN(source_id);
for (devfn_it = 0; devfn_it < PCI_DEVFN_MAX; ++devfn_it) {
vtd_as = vtd_bus->dev_as[devfn_it];
if (vtd_as && ((devfn_it & mask) == (devfn & mask))) {
trace_vtd_inv_desc_cc_device(bus_n, VTD_PCI_SLOT(devfn_it),
VTD_PCI_FUNC(devfn_it));
vtd_iommu_lock(s);
vtd_as->context_cache_entry.context_cache_gen = 0;
vtd_iommu_unlock(s);
/*
* Do switch address space when needed, in case if the
* device passthrough bit is switched.
*/
vtd_switch_address_space(vtd_as);
/*
* So a device is moving out of (or moving into) a
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
* domain, resync the shadow page table.
* This won't bring bad even if we have no such
* notifier registered - the IOMMU notification
* framework will skip MAP notifications if that
* happened.
*/
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
vtd_sync_shadow_page_table(vtd_as);
}
}
}
}
/* Context-cache invalidation
* Returns the Context Actual Invalidation Granularity.
* @val: the content of the CCMD_REG
*/
static uint64_t vtd_context_cache_invalidate(IntelIOMMUState *s, uint64_t val)
{
uint64_t caig;
uint64_t type = val & VTD_CCMD_CIRG_MASK;
switch (type) {
case VTD_CCMD_DOMAIN_INVL:
/* Fall through */
case VTD_CCMD_GLOBAL_INVL:
caig = VTD_CCMD_GLOBAL_INVL_A;
vtd_context_global_invalidate(s);
break;
case VTD_CCMD_DEVICE_INVL:
caig = VTD_CCMD_DEVICE_INVL_A;
vtd_context_device_invalidate(s, VTD_CCMD_SID(val), VTD_CCMD_FM(val));
break;
default:
error_report_once("%s: invalid context: 0x%" PRIx64,
__func__, val);
caig = 0;
}
return caig;
}
static void vtd_iotlb_global_invalidate(IntelIOMMUState *s)
{
trace_vtd_inv_desc_iotlb_global();
vtd_reset_iotlb(s);
vtd_iommu_replay_all(s);
}
static void vtd_iotlb_domain_invalidate(IntelIOMMUState *s, uint16_t domain_id)
{
VTDContextEntry ce;
VTDAddressSpace *vtd_as;
trace_vtd_inv_desc_iotlb_domain(domain_id);
vtd_iommu_lock(s);
g_hash_table_foreach_remove(s->iotlb, vtd_hash_remove_by_domain,
&domain_id);
vtd_iommu_unlock(s);
QLIST_FOREACH(vtd_as, &s->vtd_as_with_notifiers, next) {
if (!vtd_dev_to_context_entry(s, pci_bus_num(vtd_as->bus),
vtd_as->devfn, &ce) &&
domain_id == vtd_get_domain_id(s, &ce)) {
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
vtd_sync_shadow_page_table(vtd_as);
}
}
}
static void vtd_iotlb_page_invalidate_notify(IntelIOMMUState *s,
uint16_t domain_id, hwaddr addr,
uint8_t am)
{
VTDAddressSpace *vtd_as;
VTDContextEntry ce;
int ret;
hwaddr size = (1 << am) * VTD_PAGE_SIZE;
QLIST_FOREACH(vtd_as, &(s->vtd_as_with_notifiers), next) {
ret = vtd_dev_to_context_entry(s, pci_bus_num(vtd_as->bus),
vtd_as->devfn, &ce);
if (!ret && domain_id == vtd_get_domain_id(s, &ce)) {
if (vtd_as_has_map_notifier(vtd_as)) {
/*
* As long as we have MAP notifications registered in
* any of our IOMMU notifiers, we need to sync the
* shadow page table.
*/
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
vtd_sync_shadow_page_table_range(vtd_as, &ce, addr, size);
} else {
/*
* For UNMAP-only notifiers, we don't need to walk the
* page tables. We just deliver the PSI down to
* invalidate caches.
*/
IOMMUTLBEvent event = {
.type = IOMMU_NOTIFIER_UNMAP,
.entry = {
.target_as = &address_space_memory,
.iova = addr,
.translated_addr = 0,
.addr_mask = size - 1,
.perm = IOMMU_NONE,
},
};
memory_region_notify_iommu(&vtd_as->iommu, 0, event);
}
}
}
}
static void vtd_iotlb_page_invalidate(IntelIOMMUState *s, uint16_t domain_id,
hwaddr addr, uint8_t am)
{
VTDIOTLBPageInvInfo info;
trace_vtd_inv_desc_iotlb_pages(domain_id, addr, am);
assert(am <= VTD_MAMV);
info.domain_id = domain_id;
info.addr = addr;
info.mask = ~((1 << am) - 1);
vtd_iommu_lock(s);
g_hash_table_foreach_remove(s->iotlb, vtd_hash_remove_by_page, &info);
vtd_iommu_unlock(s);
vtd_iotlb_page_invalidate_notify(s, domain_id, addr, am);
}
/* Flush IOTLB
* Returns the IOTLB Actual Invalidation Granularity.
* @val: the content of the IOTLB_REG
*/
static uint64_t vtd_iotlb_flush(IntelIOMMUState *s, uint64_t val)
{
uint64_t iaig;
uint64_t type = val & VTD_TLB_FLUSH_GRANU_MASK;
uint16_t domain_id;
hwaddr addr;
uint8_t am;
switch (type) {
case VTD_TLB_GLOBAL_FLUSH:
iaig = VTD_TLB_GLOBAL_FLUSH_A;
vtd_iotlb_global_invalidate(s);
break;
case VTD_TLB_DSI_FLUSH:
domain_id = VTD_TLB_DID(val);
iaig = VTD_TLB_DSI_FLUSH_A;
vtd_iotlb_domain_invalidate(s, domain_id);
break;
case VTD_TLB_PSI_FLUSH:
domain_id = VTD_TLB_DID(val);
addr = vtd_get_quad_raw(s, DMAR_IVA_REG);
am = VTD_IVA_AM(addr);
addr = VTD_IVA_ADDR(addr);
if (am > VTD_MAMV) {
error_report_once("%s: address mask overflow: 0x%" PRIx64,
__func__, vtd_get_quad_raw(s, DMAR_IVA_REG));
iaig = 0;
break;
}
iaig = VTD_TLB_PSI_FLUSH_A;
vtd_iotlb_page_invalidate(s, domain_id, addr, am);
break;
default:
error_report_once("%s: invalid granularity: 0x%" PRIx64,
__func__, val);
iaig = 0;
}
return iaig;
}
static void vtd_fetch_inv_desc(IntelIOMMUState *s);
static inline bool vtd_queued_inv_disable_check(IntelIOMMUState *s)
{
return s->qi_enabled && (s->iq_tail == s->iq_head) &&
(s->iq_last_desc_type == VTD_INV_DESC_WAIT);
}
static void vtd_handle_gcmd_qie(IntelIOMMUState *s, bool en)
{
uint64_t iqa_val = vtd_get_quad_raw(s, DMAR_IQA_REG);
trace_vtd_inv_qi_enable(en);
if (en) {
s->iq = iqa_val & VTD_IQA_IQA_MASK(s->aw_bits);
/* 2^(x+8) entries */
s->iq_size = 1UL << ((iqa_val & VTD_IQA_QS) + 8 - (s->iq_dw ? 1 : 0));
s->qi_enabled = true;
trace_vtd_inv_qi_setup(s->iq, s->iq_size);
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, 0, VTD_GSTS_QIES);
if (s->iq_tail != 0) {
/*
* This is a spec violation but Windows guests are known to set up
* Queued Invalidation this way so we allow the write and process
* Invalidation Descriptors right away.
*/
trace_vtd_warn_invalid_qi_tail(s->iq_tail);
if (!(vtd_get_long_raw(s, DMAR_FSTS_REG) & VTD_FSTS_IQE)) {
vtd_fetch_inv_desc(s);
}
}
} else {
if (vtd_queued_inv_disable_check(s)) {
/* disable Queued Invalidation */
vtd_set_quad_raw(s, DMAR_IQH_REG, 0);
s->iq_head = 0;
s->qi_enabled = false;
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, VTD_GSTS_QIES, 0);
} else {
error_report_once("%s: detected improper state when disable QI "
"(head=0x%x, tail=0x%x, last_type=%d)",
__func__,
s->iq_head, s->iq_tail, s->iq_last_desc_type);
}
}
}
/* Set Root Table Pointer */
static void vtd_handle_gcmd_srtp(IntelIOMMUState *s)
{
vtd_root_table_setup(s);
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, 0, VTD_GSTS_RTPS);
intel_iommu: better handling of dmar state switch QEMU is not handling the global DMAR switch well, especially when from "on" to "off". Let's first take the example of system reset. Assuming that a guest has IOMMU enabled. When it reboots, we will drop all the existing DMAR mappings to handle the system reset, however we'll still keep the existing memory layouts which has the IOMMU memory region enabled. So after the reboot and before the kernel reloads again, there will be no mapping at all for the host device. That's problematic since any software (for example, SeaBIOS) that runs earlier than the kernel after the reboot will assume the IOMMU is disabled, so any DMA from the software will fail. For example, a guest that boots on an assigned NVMe device might fail to find the boot device after a system reboot/reset and we'll be able to observe SeaBIOS errors if we capture the debugging log: WARNING - Timeout at nvme_wait:144! Meanwhile, we should see DMAR errors on the host of that NVMe device. It's the DMA fault that caused a NVMe driver timeout. The correct fix should be that we do proper switching of device DMA address spaces when system resets, which will setup correct memory regions and notify the backend of the devices. This might not affect much on non-assigned devices since QEMU VT-d emulation will assume a default passthrough mapping if DMAR is not enabled in the GCMD register (please refer to vtd_iommu_translate). However that's required for an assigned devices, since that'll rebuild the correct GPA to HPA mapping that is needed for any DMA operation during guest bootstrap. Besides the system reset, we have some other places that might change the global DMAR status and we'd better do the same thing there. For example, when we change the state of GCMD register, or the DMAR root pointer. Do the same refresh for all these places. For these two places we'll also need to explicitly invalidate the context entry cache and iotlb cache. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173 CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> -- v2: - do the same for GCMD write, or root pointer update [Alex] - test is carried out by me this time, by observing the vtd_switch_address_space tracepoint after system reboot v3: - rewrite commit message as suggested by Alex Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-29 06:36:15 +03:00
vtd_reset_caches(s);
vtd_address_space_refresh_all(s);
}
/* Set Interrupt Remap Table Pointer */
static void vtd_handle_gcmd_sirtp(IntelIOMMUState *s)
{
vtd_interrupt_remap_table_setup(s);
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, 0, VTD_GSTS_IRTPS);
}
/* Handle Translation Enable/Disable */
static void vtd_handle_gcmd_te(IntelIOMMUState *s, bool en)
{
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
if (s->dmar_enabled == en) {
return;
}
trace_vtd_dmar_enable(en);
if (en) {
s->dmar_enabled = true;
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, 0, VTD_GSTS_TES);
} else {
s->dmar_enabled = false;
/* Clear the index of Fault Recording Register */
s->next_frcd_reg = 0;
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, VTD_GSTS_TES, 0);
}
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
intel_iommu: better handling of dmar state switch QEMU is not handling the global DMAR switch well, especially when from "on" to "off". Let's first take the example of system reset. Assuming that a guest has IOMMU enabled. When it reboots, we will drop all the existing DMAR mappings to handle the system reset, however we'll still keep the existing memory layouts which has the IOMMU memory region enabled. So after the reboot and before the kernel reloads again, there will be no mapping at all for the host device. That's problematic since any software (for example, SeaBIOS) that runs earlier than the kernel after the reboot will assume the IOMMU is disabled, so any DMA from the software will fail. For example, a guest that boots on an assigned NVMe device might fail to find the boot device after a system reboot/reset and we'll be able to observe SeaBIOS errors if we capture the debugging log: WARNING - Timeout at nvme_wait:144! Meanwhile, we should see DMAR errors on the host of that NVMe device. It's the DMA fault that caused a NVMe driver timeout. The correct fix should be that we do proper switching of device DMA address spaces when system resets, which will setup correct memory regions and notify the backend of the devices. This might not affect much on non-assigned devices since QEMU VT-d emulation will assume a default passthrough mapping if DMAR is not enabled in the GCMD register (please refer to vtd_iommu_translate). However that's required for an assigned devices, since that'll rebuild the correct GPA to HPA mapping that is needed for any DMA operation during guest bootstrap. Besides the system reset, we have some other places that might change the global DMAR status and we'd better do the same thing there. For example, when we change the state of GCMD register, or the DMAR root pointer. Do the same refresh for all these places. For these two places we'll also need to explicitly invalidate the context entry cache and iotlb cache. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173 CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> -- v2: - do the same for GCMD write, or root pointer update [Alex] - test is carried out by me this time, by observing the vtd_switch_address_space tracepoint after system reboot v3: - rewrite commit message as suggested by Alex Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-29 06:36:15 +03:00
vtd_reset_caches(s);
vtd_address_space_refresh_all(s);
}
/* Handle Interrupt Remap Enable/Disable */
static void vtd_handle_gcmd_ire(IntelIOMMUState *s, bool en)
{
trace_vtd_ir_enable(en);
if (en) {
s->intr_enabled = true;
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, 0, VTD_GSTS_IRES);
} else {
s->intr_enabled = false;
/* Ok - report back to driver */
vtd_set_clear_mask_long(s, DMAR_GSTS_REG, VTD_GSTS_IRES, 0);
}
}
/* Handle write to Global Command Register */
static void vtd_handle_gcmd_write(IntelIOMMUState *s)
{
uint32_t status = vtd_get_long_raw(s, DMAR_GSTS_REG);
uint32_t val = vtd_get_long_raw(s, DMAR_GCMD_REG);
uint32_t changed = status ^ val;
trace_vtd_reg_write_gcmd(status, val);
if (changed & VTD_GCMD_TE) {
/* Translation enable/disable */
vtd_handle_gcmd_te(s, val & VTD_GCMD_TE);
}
if (val & VTD_GCMD_SRTP) {
/* Set/update the root-table pointer */
vtd_handle_gcmd_srtp(s);
}
if (changed & VTD_GCMD_QIE) {
/* Queued Invalidation Enable */
vtd_handle_gcmd_qie(s, val & VTD_GCMD_QIE);
}
if (val & VTD_GCMD_SIRTP) {
/* Set/update the interrupt remapping root-table pointer */
vtd_handle_gcmd_sirtp(s);
}
if (changed & VTD_GCMD_IRE) {
/* Interrupt remap enable/disable */
vtd_handle_gcmd_ire(s, val & VTD_GCMD_IRE);
}
}
/* Handle write to Context Command Register */
static void vtd_handle_ccmd_write(IntelIOMMUState *s)
{
uint64_t ret;
uint64_t val = vtd_get_quad_raw(s, DMAR_CCMD_REG);
/* Context-cache invalidation request */
if (val & VTD_CCMD_ICC) {
if (s->qi_enabled) {
error_report_once("Queued Invalidation enabled, "
"should not use register-based invalidation");
return;
}
ret = vtd_context_cache_invalidate(s, val);
/* Invalidation completed. Change something to show */
vtd_set_clear_mask_quad(s, DMAR_CCMD_REG, VTD_CCMD_ICC, 0ULL);
ret = vtd_set_clear_mask_quad(s, DMAR_CCMD_REG, VTD_CCMD_CAIG_MASK,
ret);
}
}
/* Handle write to IOTLB Invalidation Register */
static void vtd_handle_iotlb_write(IntelIOMMUState *s)
{
uint64_t ret;
uint64_t val = vtd_get_quad_raw(s, DMAR_IOTLB_REG);
/* IOTLB invalidation request */
if (val & VTD_TLB_IVT) {
if (s->qi_enabled) {
error_report_once("Queued Invalidation enabled, "
"should not use register-based invalidation");
return;
}
ret = vtd_iotlb_flush(s, val);
/* Invalidation completed. Change something to show */
vtd_set_clear_mask_quad(s, DMAR_IOTLB_REG, VTD_TLB_IVT, 0ULL);
ret = vtd_set_clear_mask_quad(s, DMAR_IOTLB_REG,
VTD_TLB_FLUSH_GRANU_MASK_A, ret);
}
}
/* Fetch an Invalidation Descriptor from the Invalidation Queue */
static bool vtd_get_inv_desc(IntelIOMMUState *s,
VTDInvDesc *inv_desc)
{
dma_addr_t base_addr = s->iq;
uint32_t offset = s->iq_head;
uint32_t dw = s->iq_dw ? 32 : 16;
dma_addr_t addr = base_addr + offset * dw;
if (dma_memory_read(&address_space_memory, addr, inv_desc, dw)) {
error_report_once("Read INV DESC failed.");
return false;
}
inv_desc->lo = le64_to_cpu(inv_desc->lo);
inv_desc->hi = le64_to_cpu(inv_desc->hi);
if (dw == 32) {
inv_desc->val[2] = le64_to_cpu(inv_desc->val[2]);
inv_desc->val[3] = le64_to_cpu(inv_desc->val[3]);
}
return true;
}
static bool vtd_process_wait_desc(IntelIOMMUState *s, VTDInvDesc *inv_desc)
{
if ((inv_desc->hi & VTD_INV_DESC_WAIT_RSVD_HI) ||
(inv_desc->lo & VTD_INV_DESC_WAIT_RSVD_LO)) {
error_report_once("%s: invalid wait desc: hi=%"PRIx64", lo=%"PRIx64
" (reserved nonzero)", __func__, inv_desc->hi,
inv_desc->lo);
return false;
}
if (inv_desc->lo & VTD_INV_DESC_WAIT_SW) {
/* Status Write */
uint32_t status_data = (uint32_t)(inv_desc->lo >>
VTD_INV_DESC_WAIT_DATA_SHIFT);
assert(!(inv_desc->lo & VTD_INV_DESC_WAIT_IF));
/* FIXME: need to be masked with HAW? */
dma_addr_t status_addr = inv_desc->hi;
trace_vtd_inv_desc_wait_sw(status_addr, status_data);
status_data = cpu_to_le32(status_data);
if (dma_memory_write(&address_space_memory, status_addr, &status_data,
sizeof(status_data))) {
trace_vtd_inv_desc_wait_write_fail(inv_desc->hi, inv_desc->lo);
return false;
}
} else if (inv_desc->lo & VTD_INV_DESC_WAIT_IF) {
/* Interrupt flag */
vtd_generate_completion_event(s);
} else {
error_report_once("%s: invalid wait desc: hi=%"PRIx64", lo=%"PRIx64
" (unknown type)", __func__, inv_desc->hi,
inv_desc->lo);
return false;
}
return true;
}
static bool vtd_process_context_cache_desc(IntelIOMMUState *s,
VTDInvDesc *inv_desc)
{
uint16_t sid, fmask;
if ((inv_desc->lo & VTD_INV_DESC_CC_RSVD) || inv_desc->hi) {
error_report_once("%s: invalid cc inv desc: hi=%"PRIx64", lo=%"PRIx64
" (reserved nonzero)", __func__, inv_desc->hi,
inv_desc->lo);
return false;
}
switch (inv_desc->lo & VTD_INV_DESC_CC_G) {
case VTD_INV_DESC_CC_DOMAIN:
trace_vtd_inv_desc_cc_domain(
(uint16_t)VTD_INV_DESC_CC_DID(inv_desc->lo));
/* Fall through */
case VTD_INV_DESC_CC_GLOBAL:
vtd_context_global_invalidate(s);
break;
case VTD_INV_DESC_CC_DEVICE:
sid = VTD_INV_DESC_CC_SID(inv_desc->lo);
fmask = VTD_INV_DESC_CC_FM(inv_desc->lo);
vtd_context_device_invalidate(s, sid, fmask);
break;
default:
error_report_once("%s: invalid cc inv desc: hi=%"PRIx64", lo=%"PRIx64
" (invalid type)", __func__, inv_desc->hi,
inv_desc->lo);
return false;
}
return true;
}
static bool vtd_process_iotlb_desc(IntelIOMMUState *s, VTDInvDesc *inv_desc)
{
uint16_t domain_id;
uint8_t am;
hwaddr addr;
if ((inv_desc->lo & VTD_INV_DESC_IOTLB_RSVD_LO) ||
(inv_desc->hi & VTD_INV_DESC_IOTLB_RSVD_HI)) {
error_report_once("%s: invalid iotlb inv desc: hi=0x%"PRIx64
", lo=0x%"PRIx64" (reserved bits unzero)",
__func__, inv_desc->hi, inv_desc->lo);
return false;
}
switch (inv_desc->lo & VTD_INV_DESC_IOTLB_G) {
case VTD_INV_DESC_IOTLB_GLOBAL:
vtd_iotlb_global_invalidate(s);
break;
case VTD_INV_DESC_IOTLB_DOMAIN:
domain_id = VTD_INV_DESC_IOTLB_DID(inv_desc->lo);
vtd_iotlb_domain_invalidate(s, domain_id);
break;
case VTD_INV_DESC_IOTLB_PAGE:
domain_id = VTD_INV_DESC_IOTLB_DID(inv_desc->lo);
addr = VTD_INV_DESC_IOTLB_ADDR(inv_desc->hi);
am = VTD_INV_DESC_IOTLB_AM(inv_desc->hi);
if (am > VTD_MAMV) {
error_report_once("%s: invalid iotlb inv desc: hi=0x%"PRIx64
", lo=0x%"PRIx64" (am=%u > VTD_MAMV=%u)",
__func__, inv_desc->hi, inv_desc->lo,
am, (unsigned)VTD_MAMV);
return false;
}
vtd_iotlb_page_invalidate(s, domain_id, addr, am);
break;
default:
error_report_once("%s: invalid iotlb inv desc: hi=0x%"PRIx64
", lo=0x%"PRIx64" (type mismatch: 0x%llx)",
__func__, inv_desc->hi, inv_desc->lo,
inv_desc->lo & VTD_INV_DESC_IOTLB_G);
return false;
}
return true;
}
static bool vtd_process_inv_iec_desc(IntelIOMMUState *s,
VTDInvDesc *inv_desc)
{
trace_vtd_inv_desc_iec(inv_desc->iec.granularity,
inv_desc->iec.index,
inv_desc->iec.index_mask);
vtd_iec_notify_all(s, !inv_desc->iec.granularity,
inv_desc->iec.index,
inv_desc->iec.index_mask);
return true;
}
static bool vtd_process_device_iotlb_desc(IntelIOMMUState *s,
VTDInvDesc *inv_desc)
{
VTDAddressSpace *vtd_dev_as;
IOMMUTLBEvent event;
struct VTDBus *vtd_bus;
hwaddr addr;
uint64_t sz;
uint16_t sid;
uint8_t devfn;
bool size;
uint8_t bus_num;
addr = VTD_INV_DESC_DEVICE_IOTLB_ADDR(inv_desc->hi);
sid = VTD_INV_DESC_DEVICE_IOTLB_SID(inv_desc->lo);
devfn = sid & 0xff;
bus_num = sid >> 8;
size = VTD_INV_DESC_DEVICE_IOTLB_SIZE(inv_desc->hi);
if ((inv_desc->lo & VTD_INV_DESC_DEVICE_IOTLB_RSVD_LO) ||
(inv_desc->hi & VTD_INV_DESC_DEVICE_IOTLB_RSVD_HI)) {
error_report_once("%s: invalid dev-iotlb inv desc: hi=%"PRIx64
", lo=%"PRIx64" (reserved nonzero)", __func__,
inv_desc->hi, inv_desc->lo);
return false;
}
vtd_bus = vtd_find_as_from_bus_num(s, bus_num);
if (!vtd_bus) {
goto done;
}
vtd_dev_as = vtd_bus->dev_as[devfn];
if (!vtd_dev_as) {
goto done;
}
/* According to ATS spec table 2.4:
* S = 0, bits 15:12 = xxxx range size: 4K
* S = 1, bits 15:12 = xxx0 range size: 8K
* S = 1, bits 15:12 = xx01 range size: 16K
* S = 1, bits 15:12 = x011 range size: 32K
* S = 1, bits 15:12 = 0111 range size: 64K
* ...
*/
if (size) {
sz = (VTD_PAGE_SIZE * 2) << cto64(addr >> VTD_PAGE_SHIFT);
addr &= ~(sz - 1);
} else {
sz = VTD_PAGE_SIZE;
}
event.type = IOMMU_NOTIFIER_DEVIOTLB_UNMAP;
event.entry.target_as = &vtd_dev_as->as;
event.entry.addr_mask = sz - 1;
event.entry.iova = addr;
event.entry.perm = IOMMU_NONE;
event.entry.translated_addr = 0;
memory_region_notify_iommu(&vtd_dev_as->iommu, 0, event);
done:
return true;
}
static bool vtd_process_inv_desc(IntelIOMMUState *s)
{
VTDInvDesc inv_desc;
uint8_t desc_type;
trace_vtd_inv_qi_head(s->iq_head);
if (!vtd_get_inv_desc(s, &inv_desc)) {
s->iq_last_desc_type = VTD_INV_DESC_NONE;
return false;
}
desc_type = inv_desc.lo & VTD_INV_DESC_TYPE;
/* FIXME: should update at first or at last? */
s->iq_last_desc_type = desc_type;
switch (desc_type) {
case VTD_INV_DESC_CC:
trace_vtd_inv_desc("context-cache", inv_desc.hi, inv_desc.lo);
if (!vtd_process_context_cache_desc(s, &inv_desc)) {
return false;
}
break;
case VTD_INV_DESC_IOTLB:
trace_vtd_inv_desc("iotlb", inv_desc.hi, inv_desc.lo);
if (!vtd_process_iotlb_desc(s, &inv_desc)) {
return false;
}
break;
/*
* TODO: the entity of below two cases will be implemented in future series.
* To make guest (which integrates scalable mode support patch set in
* iommu driver) work, just return true is enough so far.
*/
case VTD_INV_DESC_PC:
break;
case VTD_INV_DESC_PIOTLB:
break;
case VTD_INV_DESC_WAIT:
trace_vtd_inv_desc("wait", inv_desc.hi, inv_desc.lo);
if (!vtd_process_wait_desc(s, &inv_desc)) {
return false;
}
break;
case VTD_INV_DESC_IEC:
trace_vtd_inv_desc("iec", inv_desc.hi, inv_desc.lo);
if (!vtd_process_inv_iec_desc(s, &inv_desc)) {
return false;
}
break;
case VTD_INV_DESC_DEVICE:
trace_vtd_inv_desc("device", inv_desc.hi, inv_desc.lo);
if (!vtd_process_device_iotlb_desc(s, &inv_desc)) {
return false;
}
break;
default:
error_report_once("%s: invalid inv desc: hi=%"PRIx64", lo=%"PRIx64
" (unknown type)", __func__, inv_desc.hi,
inv_desc.lo);
return false;
}
s->iq_head++;
if (s->iq_head == s->iq_size) {
s->iq_head = 0;
}
return true;
}
/* Try to fetch and process more Invalidation Descriptors */
static void vtd_fetch_inv_desc(IntelIOMMUState *s)
{
int qi_shift;
/* Refer to 10.4.23 of VT-d spec 3.0 */
qi_shift = s->iq_dw ? VTD_IQH_QH_SHIFT_5 : VTD_IQH_QH_SHIFT_4;
trace_vtd_inv_qi_fetch();
if (s->iq_tail >= s->iq_size) {
/* Detects an invalid Tail pointer */
error_report_once("%s: detected invalid QI tail "
"(tail=0x%x, size=0x%x)",
__func__, s->iq_tail, s->iq_size);
vtd_handle_inv_queue_error(s);
return;
}
while (s->iq_head != s->iq_tail) {
if (!vtd_process_inv_desc(s)) {
/* Invalidation Queue Errors */
vtd_handle_inv_queue_error(s);
break;
}
/* Must update the IQH_REG in time */
vtd_set_quad_raw(s, DMAR_IQH_REG,
(((uint64_t)(s->iq_head)) << qi_shift) &
VTD_IQH_QH_MASK);
}
}
/* Handle write to Invalidation Queue Tail Register */
static void vtd_handle_iqt_write(IntelIOMMUState *s)
{
uint64_t val = vtd_get_quad_raw(s, DMAR_IQT_REG);
if (s->iq_dw && (val & VTD_IQT_QT_256_RSV_BIT)) {
error_report_once("%s: RSV bit is set: val=0x%"PRIx64,
__func__, val);
return;
}
s->iq_tail = VTD_IQT_QT(s->iq_dw, val);
trace_vtd_inv_qi_tail(s->iq_tail);
if (s->qi_enabled && !(vtd_get_long_raw(s, DMAR_FSTS_REG) & VTD_FSTS_IQE)) {
/* Process Invalidation Queue here */
vtd_fetch_inv_desc(s);
}
}
static void vtd_handle_fsts_write(IntelIOMMUState *s)
{
uint32_t fsts_reg = vtd_get_long_raw(s, DMAR_FSTS_REG);
uint32_t fectl_reg = vtd_get_long_raw(s, DMAR_FECTL_REG);
uint32_t status_fields = VTD_FSTS_PFO | VTD_FSTS_PPF | VTD_FSTS_IQE;
if ((fectl_reg & VTD_FECTL_IP) && !(fsts_reg & status_fields)) {
vtd_set_clear_mask_long(s, DMAR_FECTL_REG, VTD_FECTL_IP, 0);
trace_vtd_fsts_clear_ip();
}
/* FIXME: when IQE is Clear, should we try to fetch some Invalidation
* Descriptors if there are any when Queued Invalidation is enabled?
*/
}
static void vtd_handle_fectl_write(IntelIOMMUState *s)
{
uint32_t fectl_reg;
/* FIXME: when software clears the IM field, check the IP field. But do we
* need to compare the old value and the new value to conclude that
* software clears the IM field? Or just check if the IM field is zero?
*/
fectl_reg = vtd_get_long_raw(s, DMAR_FECTL_REG);
trace_vtd_reg_write_fectl(fectl_reg);
if ((fectl_reg & VTD_FECTL_IP) && !(fectl_reg & VTD_FECTL_IM)) {
vtd_generate_interrupt(s, DMAR_FEADDR_REG, DMAR_FEDATA_REG);
vtd_set_clear_mask_long(s, DMAR_FECTL_REG, VTD_FECTL_IP, 0);
}
}
static void vtd_handle_ics_write(IntelIOMMUState *s)
{
uint32_t ics_reg = vtd_get_long_raw(s, DMAR_ICS_REG);
uint32_t iectl_reg = vtd_get_long_raw(s, DMAR_IECTL_REG);
if ((iectl_reg & VTD_IECTL_IP) && !(ics_reg & VTD_ICS_IWC)) {
trace_vtd_reg_ics_clear_ip();
vtd_set_clear_mask_long(s, DMAR_IECTL_REG, VTD_IECTL_IP, 0);
}
}
static void vtd_handle_iectl_write(IntelIOMMUState *s)
{
uint32_t iectl_reg;
/* FIXME: when software clears the IM field, check the IP field. But do we
* need to compare the old value and the new value to conclude that
* software clears the IM field? Or just check if the IM field is zero?
*/
iectl_reg = vtd_get_long_raw(s, DMAR_IECTL_REG);
trace_vtd_reg_write_iectl(iectl_reg);
if ((iectl_reg & VTD_IECTL_IP) && !(iectl_reg & VTD_IECTL_IM)) {
vtd_generate_interrupt(s, DMAR_IEADDR_REG, DMAR_IEDATA_REG);
vtd_set_clear_mask_long(s, DMAR_IECTL_REG, VTD_IECTL_IP, 0);
}
}
static uint64_t vtd_mem_read(void *opaque, hwaddr addr, unsigned size)
{
IntelIOMMUState *s = opaque;
uint64_t val;
trace_vtd_reg_read(addr, size);
if (addr + size > DMAR_REG_SIZE) {
error_report_once("%s: MMIO over range: addr=0x%" PRIx64
" size=0x%x", __func__, addr, size);
return (uint64_t)-1;
}
switch (addr) {
/* Root Table Address Register, 64-bit */
case DMAR_RTADDR_REG:
val = vtd_get_quad_raw(s, DMAR_RTADDR_REG);
if (size == 4) {
val = val & ((1ULL << 32) - 1);
}
break;
case DMAR_RTADDR_REG_HI:
assert(size == 4);
val = vtd_get_quad_raw(s, DMAR_RTADDR_REG) >> 32;
break;
/* Invalidation Queue Address Register, 64-bit */
case DMAR_IQA_REG:
val = s->iq | (vtd_get_quad(s, DMAR_IQA_REG) & VTD_IQA_QS);
if (size == 4) {
val = val & ((1ULL << 32) - 1);
}
break;
case DMAR_IQA_REG_HI:
assert(size == 4);
val = s->iq >> 32;
break;
default:
if (size == 4) {
val = vtd_get_long(s, addr);
} else {
val = vtd_get_quad(s, addr);
}
}
return val;
}
static void vtd_mem_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
IntelIOMMUState *s = opaque;
trace_vtd_reg_write(addr, size, val);
if (addr + size > DMAR_REG_SIZE) {
error_report_once("%s: MMIO over range: addr=0x%" PRIx64
" size=0x%x", __func__, addr, size);
return;
}
switch (addr) {
/* Global Command Register, 32-bit */
case DMAR_GCMD_REG:
vtd_set_long(s, addr, val);
vtd_handle_gcmd_write(s);
break;
/* Context Command Register, 64-bit */
case DMAR_CCMD_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
vtd_handle_ccmd_write(s);
}
break;
case DMAR_CCMD_REG_HI:
assert(size == 4);
vtd_set_long(s, addr, val);
vtd_handle_ccmd_write(s);
break;
/* IOTLB Invalidation Register, 64-bit */
case DMAR_IOTLB_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
vtd_handle_iotlb_write(s);
}
break;
case DMAR_IOTLB_REG_HI:
assert(size == 4);
vtd_set_long(s, addr, val);
vtd_handle_iotlb_write(s);
break;
/* Invalidate Address Register, 64-bit */
case DMAR_IVA_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
}
break;
case DMAR_IVA_REG_HI:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Fault Status Register, 32-bit */
case DMAR_FSTS_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
vtd_handle_fsts_write(s);
break;
/* Fault Event Control Register, 32-bit */
case DMAR_FECTL_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
vtd_handle_fectl_write(s);
break;
/* Fault Event Data Register, 32-bit */
case DMAR_FEDATA_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Fault Event Address Register, 32-bit */
case DMAR_FEADDR_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
/*
* While the register is 32-bit only, some guests (Xen...) write to
* it with 64-bit.
*/
vtd_set_quad(s, addr, val);
}
break;
/* Fault Event Upper Address Register, 32-bit */
case DMAR_FEUADDR_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Protected Memory Enable Register, 32-bit */
case DMAR_PMEN_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Root Table Address Register, 64-bit */
case DMAR_RTADDR_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
}
break;
case DMAR_RTADDR_REG_HI:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Invalidation Queue Tail Register, 64-bit */
case DMAR_IQT_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
}
vtd_handle_iqt_write(s);
break;
case DMAR_IQT_REG_HI:
assert(size == 4);
vtd_set_long(s, addr, val);
/* 19:63 of IQT_REG is RsvdZ, do nothing here */
break;
/* Invalidation Queue Address Register, 64-bit */
case DMAR_IQA_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
}
if (s->ecap & VTD_ECAP_SMTS &&
val & VTD_IQA_DW_MASK) {
s->iq_dw = true;
} else {
s->iq_dw = false;
}
break;
case DMAR_IQA_REG_HI:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Invalidation Completion Status Register, 32-bit */
case DMAR_ICS_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
vtd_handle_ics_write(s);
break;
/* Invalidation Event Control Register, 32-bit */
case DMAR_IECTL_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
vtd_handle_iectl_write(s);
break;
/* Invalidation Event Data Register, 32-bit */
case DMAR_IEDATA_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Invalidation Event Address Register, 32-bit */
case DMAR_IEADDR_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Invalidation Event Upper Address Register, 32-bit */
case DMAR_IEUADDR_REG:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
/* Fault Recording Registers, 128-bit */
case DMAR_FRCD_REG_0_0:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
}
break;
case DMAR_FRCD_REG_0_1:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
case DMAR_FRCD_REG_0_2:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
/* May clear bit 127 (Fault), update PPF */
vtd_update_fsts_ppf(s);
}
break;
case DMAR_FRCD_REG_0_3:
assert(size == 4);
vtd_set_long(s, addr, val);
/* May clear bit 127 (Fault), update PPF */
vtd_update_fsts_ppf(s);
break;
case DMAR_IRTA_REG:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
}
break;
case DMAR_IRTA_REG_HI:
assert(size == 4);
vtd_set_long(s, addr, val);
break;
default:
if (size == 4) {
vtd_set_long(s, addr, val);
} else {
vtd_set_quad(s, addr, val);
}
}
}
static IOMMUTLBEntry vtd_iommu_translate(IOMMUMemoryRegion *iommu, hwaddr addr,
IOMMUAccessFlags flag, int iommu_idx)
{
VTDAddressSpace *vtd_as = container_of(iommu, VTDAddressSpace, iommu);
IntelIOMMUState *s = vtd_as->iommu_state;
IOMMUTLBEntry iotlb = {
/* We'll fill in the rest later. */
.target_as = &address_space_memory,
};
bool success;
if (likely(s->dmar_enabled)) {
success = vtd_do_iommu_translate(vtd_as, vtd_as->bus, vtd_as->devfn,
addr, flag & IOMMU_WO, &iotlb);
} else {
/* DMAR disabled, passthrough, use 4k-page*/
iotlb.iova = addr & VTD_PAGE_MASK_4K;
iotlb.translated_addr = addr & VTD_PAGE_MASK_4K;
iotlb.addr_mask = ~VTD_PAGE_MASK_4K;
iotlb.perm = IOMMU_RW;
success = true;
}
if (likely(success)) {
trace_vtd_dmar_translate(pci_bus_num(vtd_as->bus),
VTD_PCI_SLOT(vtd_as->devfn),
VTD_PCI_FUNC(vtd_as->devfn),
iotlb.iova, iotlb.translated_addr,
iotlb.addr_mask);
} else {
error_report_once("%s: detected translation failure "
"(dev=%02x:%02x:%02x, iova=0x%" PRIx64 ")",
__func__, pci_bus_num(vtd_as->bus),
VTD_PCI_SLOT(vtd_as->devfn),
VTD_PCI_FUNC(vtd_as->devfn),
addr);
}
return iotlb;
}
static int vtd_iommu_notify_flag_changed(IOMMUMemoryRegion *iommu,
IOMMUNotifierFlag old,
IOMMUNotifierFlag new,
Error **errp)
{
VTDAddressSpace *vtd_as = container_of(iommu, VTDAddressSpace, iommu);
IntelIOMMUState *s = vtd_as->iommu_state;
/* Update per-address-space notifier flags */
vtd_as->notifier_flags = new;
if (old == IOMMU_NOTIFIER_NONE) {
QLIST_INSERT_HEAD(&s->vtd_as_with_notifiers, vtd_as, next);
} else if (new == IOMMU_NOTIFIER_NONE) {
QLIST_REMOVE(vtd_as, next);
}
return 0;
}
static int vtd_post_load(void *opaque, int version_id)
{
IntelIOMMUState *iommu = opaque;
/*
* Memory regions are dynamically turned on/off depending on
* context entry configurations from the guest. After migration,
* we need to make sure the memory regions are still correct.
*/
vtd_switch_address_space_all(iommu);
/*
* We don't need to migrate the root_scalable because we can
* simply do the calculation after the loading is complete. We
* can actually do similar things with root, dmar_enabled, etc.
* however since we've had them already so we'd better keep them
* for compatibility of migration.
*/
vtd_update_scalable_state(iommu);
return 0;
}
static const VMStateDescription vtd_vmstate = {
.name = "iommu-intel",
.version_id = 1,
.minimum_version_id = 1,
.priority = MIG_PRI_IOMMU,
.post_load = vtd_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT64(root, IntelIOMMUState),
VMSTATE_UINT64(intr_root, IntelIOMMUState),
VMSTATE_UINT64(iq, IntelIOMMUState),
VMSTATE_UINT32(intr_size, IntelIOMMUState),
VMSTATE_UINT16(iq_head, IntelIOMMUState),
VMSTATE_UINT16(iq_tail, IntelIOMMUState),
VMSTATE_UINT16(iq_size, IntelIOMMUState),
VMSTATE_UINT16(next_frcd_reg, IntelIOMMUState),
VMSTATE_UINT8_ARRAY(csr, IntelIOMMUState, DMAR_REG_SIZE),
VMSTATE_UINT8(iq_last_desc_type, IntelIOMMUState),
VMSTATE_UNUSED(1), /* bool root_extended is obsolete by VT-d */
VMSTATE_BOOL(dmar_enabled, IntelIOMMUState),
VMSTATE_BOOL(qi_enabled, IntelIOMMUState),
VMSTATE_BOOL(intr_enabled, IntelIOMMUState),
VMSTATE_BOOL(intr_eime, IntelIOMMUState),
VMSTATE_END_OF_LIST()
}
};
static const MemoryRegionOps vtd_mem_ops = {
.read = vtd_mem_read,
.write = vtd_mem_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.impl = {
.min_access_size = 4,
.max_access_size = 8,
},
.valid = {
.min_access_size = 4,
.max_access_size = 8,
},
};
static Property vtd_properties[] = {
DEFINE_PROP_UINT32("version", IntelIOMMUState, version, 0),
DEFINE_PROP_ON_OFF_AUTO("eim", IntelIOMMUState, intr_eim,
ON_OFF_AUTO_AUTO),
intel_iommu: reject broken EIM Cluster x2APIC cannot work without KVM's x2apic API when the maximal APIC ID is greater than 8 and only KVM's LAPIC can support x2APIC, so we forbid other APICs and also the old KVM case with less than 9, to simplify the code. There is no point in enabling EIM in forbidden APICs, so we keep it enabled only for the KVM APIC; unconditionally, because making the option depend on KVM version would be a maintanance burden. Old QEMUs would enable eim whenever intremap was on, which would trick guests into thinking that they can enable cluster x2APIC even if any interrupt destination would get clamped to 8 bits. Depending on your configuration, QEMU could notice that the destination LAPIC is not present and report it with a very non-obvious: KVM: injection failed, MSI lost (Operation not permitted) Or the guest could say something about unexpected interrupts, because clamping leads to aliasing so interrupts were being delivered to incorrect VCPUs. KVM_X2APIC_API is the feature that allows us to enable EIM for KVM. QEMU 2.7 allowed EIM whenever interrupt remapping was enabled. In order to keep backward compatibility, we again allow guests to misbehave in non-obvious ways, and make it the default for old machine types. A user can enable the buggy mode it with "x-buggy-eim=on". Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-10 18:28:47 +03:00
DEFINE_PROP_BOOL("x-buggy-eim", IntelIOMMUState, buggy_eim, false),
DEFINE_PROP_UINT8("aw-bits", IntelIOMMUState, aw_bits,
VTD_HOST_ADDRESS_WIDTH),
DEFINE_PROP_BOOL("caching-mode", IntelIOMMUState, caching_mode, FALSE),
DEFINE_PROP_BOOL("x-scalable-mode", IntelIOMMUState, scalable_mode, FALSE),
DEFINE_PROP_BOOL("dma-drain", IntelIOMMUState, dma_drain, true),
DEFINE_PROP_END_OF_LIST(),
};
/* Read IRTE entry with specific index */
static int vtd_irte_get(IntelIOMMUState *iommu, uint16_t index,
VTD_IR_TableEntry *entry, uint16_t sid)
{
static const uint16_t vtd_svt_mask[VTD_SQ_MAX] = \
{0xffff, 0xfffb, 0xfff9, 0xfff8};
dma_addr_t addr = 0x00;
uint16_t mask, source_id;
uint8_t bus, bus_max, bus_min;
if (index >= iommu->intr_size) {
error_report_once("%s: index too large: ind=0x%x",
__func__, index);
return -VTD_FR_IR_INDEX_OVER;
}
addr = iommu->intr_root + index * sizeof(*entry);
if (dma_memory_read(&address_space_memory, addr, entry,
sizeof(*entry))) {
error_report_once("%s: read failed: ind=0x%x addr=0x%" PRIx64,
__func__, index, addr);
return -VTD_FR_IR_ROOT_INVAL;
}
trace_vtd_ir_irte_get(index, le64_to_cpu(entry->data[1]),
le64_to_cpu(entry->data[0]));
if (!entry->irte.present) {
error_report_once("%s: detected non-present IRTE "
"(index=%u, high=0x%" PRIx64 ", low=0x%" PRIx64 ")",
__func__, index, le64_to_cpu(entry->data[1]),
le64_to_cpu(entry->data[0]));
return -VTD_FR_IR_ENTRY_P;
}
if (entry->irte.__reserved_0 || entry->irte.__reserved_1 ||
entry->irte.__reserved_2) {
error_report_once("%s: detected non-zero reserved IRTE "
"(index=%u, high=0x%" PRIx64 ", low=0x%" PRIx64 ")",
__func__, index, le64_to_cpu(entry->data[1]),
le64_to_cpu(entry->data[0]));
return -VTD_FR_IR_IRTE_RSVD;
}
if (sid != X86_IOMMU_SID_INVALID) {
/* Validate IRTE SID */
source_id = le32_to_cpu(entry->irte.source_id);
switch (entry->irte.sid_vtype) {
case VTD_SVT_NONE:
break;
case VTD_SVT_ALL:
mask = vtd_svt_mask[entry->irte.sid_q];
if ((source_id & mask) != (sid & mask)) {
error_report_once("%s: invalid IRTE SID "
"(index=%u, sid=%u, source_id=%u)",
__func__, index, sid, source_id);
return -VTD_FR_IR_SID_ERR;
}
break;
case VTD_SVT_BUS:
bus_max = source_id >> 8;
bus_min = source_id & 0xff;
bus = sid >> 8;
if (bus > bus_max || bus < bus_min) {
error_report_once("%s: invalid SVT_BUS "
"(index=%u, bus=%u, min=%u, max=%u)",
__func__, index, bus, bus_min, bus_max);
return -VTD_FR_IR_SID_ERR;
}
break;
default:
error_report_once("%s: detected invalid IRTE SVT "
"(index=%u, type=%d)", __func__,
index, entry->irte.sid_vtype);
/* Take this as verification failure. */
return -VTD_FR_IR_SID_ERR;
}
}
return 0;
}
/* Fetch IRQ information of specific IR index */
static int vtd_remap_irq_get(IntelIOMMUState *iommu, uint16_t index,
X86IOMMUIrq *irq, uint16_t sid)
{
VTD_IR_TableEntry irte = {};
int ret = 0;
ret = vtd_irte_get(iommu, index, &irte, sid);
if (ret) {
return ret;
}
irq->trigger_mode = irte.irte.trigger_mode;
irq->vector = irte.irte.vector;
irq->delivery_mode = irte.irte.delivery_mode;
irq->dest = le32_to_cpu(irte.irte.dest_id);
if (!iommu->intr_eime) {
#define VTD_IR_APIC_DEST_MASK (0xff00ULL)
#define VTD_IR_APIC_DEST_SHIFT (8)
irq->dest = (irq->dest & VTD_IR_APIC_DEST_MASK) >>
VTD_IR_APIC_DEST_SHIFT;
}
irq->dest_mode = irte.irte.dest_mode;
irq->redir_hint = irte.irte.redir_hint;
trace_vtd_ir_remap(index, irq->trigger_mode, irq->vector,
irq->delivery_mode, irq->dest, irq->dest_mode);
return 0;
}
/* Interrupt remapping for MSI/MSI-X entry */
static int vtd_interrupt_remap_msi(IntelIOMMUState *iommu,
MSIMessage *origin,
MSIMessage *translated,
uint16_t sid)
{
int ret = 0;
VTD_IR_MSIAddress addr;
uint16_t index;
X86IOMMUIrq irq = {};
assert(origin && translated);
trace_vtd_ir_remap_msi_req(origin->address, origin->data);
if (!iommu || !iommu->intr_enabled) {
memcpy(translated, origin, sizeof(*origin));
goto out;
}
if (origin->address & VTD_MSI_ADDR_HI_MASK) {
error_report_once("%s: MSI address high 32 bits non-zero detected: "
"address=0x%" PRIx64, __func__, origin->address);
return -VTD_FR_IR_REQ_RSVD;
}
addr.data = origin->address & VTD_MSI_ADDR_LO_MASK;
if (addr.addr.__head != 0xfee) {
error_report_once("%s: MSI address low 32 bit invalid: 0x%" PRIx32,
__func__, addr.data);
return -VTD_FR_IR_REQ_RSVD;
}
/* This is compatible mode. */
if (addr.addr.int_mode != VTD_IR_INT_FORMAT_REMAP) {
memcpy(translated, origin, sizeof(*origin));
goto out;
}
index = addr.addr.index_h << 15 | le16_to_cpu(addr.addr.index_l);
#define VTD_IR_MSI_DATA_SUBHANDLE (0x0000ffff)
#define VTD_IR_MSI_DATA_RESERVED (0xffff0000)
if (addr.addr.sub_valid) {
/* See VT-d spec 5.1.2.2 and 5.1.3 on subhandle */
index += origin->data & VTD_IR_MSI_DATA_SUBHANDLE;
}
ret = vtd_remap_irq_get(iommu, index, &irq, sid);
if (ret) {
return ret;
}
if (addr.addr.sub_valid) {
trace_vtd_ir_remap_type("MSI");
if (origin->data & VTD_IR_MSI_DATA_RESERVED) {
error_report_once("%s: invalid IR MSI "
"(sid=%u, address=0x%" PRIx64
", data=0x%" PRIx32 ")",
__func__, sid, origin->address, origin->data);
return -VTD_FR_IR_REQ_RSVD;
}
} else {
uint8_t vector = origin->data & 0xff;
uint8_t trigger_mode = (origin->data >> MSI_DATA_TRIGGER_SHIFT) & 0x1;
trace_vtd_ir_remap_type("IOAPIC");
/* IOAPIC entry vector should be aligned with IRTE vector
* (see vt-d spec 5.1.5.1). */
if (vector != irq.vector) {
trace_vtd_warn_ir_vector(sid, index, vector, irq.vector);
}
/* The Trigger Mode field must match the Trigger Mode in the IRTE.
* (see vt-d spec 5.1.5.1). */
if (trigger_mode != irq.trigger_mode) {
trace_vtd_warn_ir_trigger(sid, index, trigger_mode,
irq.trigger_mode);
}
}
/*
* We'd better keep the last two bits, assuming that guest OS
* might modify it. Keep it does not hurt after all.
*/
irq.msi_addr_last_bits = addr.addr.__not_care;
/* Translate X86IOMMUIrq to MSI message */
x86_iommu_irq_to_msi_message(&irq, translated);
out:
trace_vtd_ir_remap_msi(origin->address, origin->data,
translated->address, translated->data);
return 0;
}
static int vtd_int_remap(X86IOMMUState *iommu, MSIMessage *src,
MSIMessage *dst, uint16_t sid)
{
return vtd_interrupt_remap_msi(INTEL_IOMMU_DEVICE(iommu),
src, dst, sid);
}
static MemTxResult vtd_mem_ir_read(void *opaque, hwaddr addr,
uint64_t *data, unsigned size,
MemTxAttrs attrs)
{
return MEMTX_OK;
}
static MemTxResult vtd_mem_ir_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size,
MemTxAttrs attrs)
{
int ret = 0;
MSIMessage from = {}, to = {};
uint16_t sid = X86_IOMMU_SID_INVALID;
from.address = (uint64_t) addr + VTD_INTERRUPT_ADDR_FIRST;
from.data = (uint32_t) value;
if (!attrs.unspecified) {
/* We have explicit Source ID */
sid = attrs.requester_id;
}
ret = vtd_interrupt_remap_msi(opaque, &from, &to, sid);
if (ret) {
/* TODO: report error */
/* Drop this interrupt */
return MEMTX_ERROR;
}
apic_get_class()->send_msi(&to);
return MEMTX_OK;
}
static const MemoryRegionOps vtd_mem_ir_ops = {
.read_with_attrs = vtd_mem_ir_read,
.write_with_attrs = vtd_mem_ir_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
VTDAddressSpace *vtd_find_add_as(IntelIOMMUState *s, PCIBus *bus, int devfn)
{
uintptr_t key = (uintptr_t)bus;
VTDBus *vtd_bus = g_hash_table_lookup(s->vtd_as_by_busptr, &key);
VTDAddressSpace *vtd_dev_as;
char name[128];
if (!vtd_bus) {
uintptr_t *new_key = g_malloc(sizeof(*new_key));
*new_key = (uintptr_t)bus;
/* No corresponding free() */
vtd_bus = g_malloc0(sizeof(VTDBus) + sizeof(VTDAddressSpace *) * \
PCI_DEVFN_MAX);
vtd_bus->bus = bus;
g_hash_table_insert(s->vtd_as_by_busptr, new_key, vtd_bus);
}
vtd_dev_as = vtd_bus->dev_as[devfn];
if (!vtd_dev_as) {
snprintf(name, sizeof(name), "vtd-%02x.%x", PCI_SLOT(devfn),
PCI_FUNC(devfn));
vtd_bus->dev_as[devfn] = vtd_dev_as = g_malloc0(sizeof(VTDAddressSpace));
vtd_dev_as->bus = bus;
vtd_dev_as->devfn = (uint8_t)devfn;
vtd_dev_as->iommu_state = s;
vtd_dev_as->context_cache_entry.context_cache_gen = 0;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
vtd_dev_as->iova_tree = iova_tree_new();
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
memory_region_init(&vtd_dev_as->root, OBJECT(s), name, UINT64_MAX);
address_space_init(&vtd_dev_as->as, &vtd_dev_as->root, "vtd-root");
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
/*
* Build the DMAR-disabled container with aliases to the
* shared MRs. Note that aliasing to a shared memory region
* could help the memory API to detect same FlatViews so we
* can have devices to share the same FlatView when DMAR is
* disabled (either by not providing "intel_iommu=on" or with
* "iommu=pt"). It will greatly reduce the total number of
* FlatViews of the system hence VM runs faster.
*/
memory_region_init_alias(&vtd_dev_as->nodmar, OBJECT(s),
"vtd-nodmar", &s->mr_nodmar, 0,
memory_region_size(&s->mr_nodmar));
/*
* Build the per-device DMAR-enabled container.
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
*
* TODO: currently we have per-device IOMMU memory region only
* because we have per-device IOMMU notifiers for devices. If
* one day we can abstract the IOMMU notifiers out of the
* memory regions then we can also share the same memory
* region here just like what we've done above with the nodmar
* region.
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
*/
strcat(name, "-dmar");
memory_region_init_iommu(&vtd_dev_as->iommu, sizeof(vtd_dev_as->iommu),
TYPE_INTEL_IOMMU_MEMORY_REGION, OBJECT(s),
name, UINT64_MAX);
memory_region_init_alias(&vtd_dev_as->iommu_ir, OBJECT(s), "vtd-ir",
&s->mr_ir, 0, memory_region_size(&s->mr_ir));
memory_region_add_subregion_overlap(MEMORY_REGION(&vtd_dev_as->iommu),
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
VTD_INTERRUPT_ADDR_FIRST,
&vtd_dev_as->iommu_ir, 1);
/*
* Hook both the containers under the root container, we
* switch between DMAR & noDMAR by enable/disable
* corresponding sub-containers
*/
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
memory_region_add_subregion_overlap(&vtd_dev_as->root, 0,
MEMORY_REGION(&vtd_dev_as->iommu),
0);
memory_region_add_subregion_overlap(&vtd_dev_as->root, 0,
&vtd_dev_as->nodmar, 0);
intel_iommu: allow dynamic switch of IOMMU region This is preparation work to finally enabled dynamic switching ON/OFF for VT-d protection. The old VT-d codes is using static IOMMU address space, and that won't satisfy vfio-pci device listeners. Let me explain. vfio-pci devices depend on the memory region listener and IOMMU replay mechanism to make sure the device mapping is coherent with the guest even if there are domain switches. And there are two kinds of domain switches: (1) switch from domain A -> B (2) switch from domain A -> no domain (e.g., turn DMAR off) Case (1) is handled by the context entry invalidation handling by the VT-d replay logic. What the replay function should do here is to replay the existing page mappings in domain B. However for case (2), we don't want to replay any domain mappings - we just need the default GPA->HPA mappings (the address_space_memory mapping). And this patch helps on case (2) to build up the mapping automatically by leveraging the vfio-pci memory listeners. Another important thing that this patch does is to seperate IR (Interrupt Remapping) from DMAR (DMA Remapping). IR region should not depend on the DMAR region (like before this patch). It should be a standalone region, and it should be able to be activated without DMAR (which is a common behavior of Linux kernel - by default it enables IR while disabled DMAR). Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: \"Michael S. Tsirkin\" <mst@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-9-git-send-email-peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-07 13:59:14 +03:00
vtd_switch_address_space(vtd_dev_as);
}
return vtd_dev_as;
}
static uint64_t get_naturally_aligned_size(uint64_t start,
uint64_t size, int gaw)
{
uint64_t max_mask = 1ULL << gaw;
uint64_t alignment = start ? start & -start : max_mask;
alignment = MIN(alignment, max_mask);
size = MIN(size, max_mask);
if (alignment <= size) {
/* Increase the alignment of start */
return alignment;
} else {
/* Find the largest page mask from size */
return 1ULL << (63 - clz64(size));
}
}
/* Unmap the whole range in the notifier's scope. */
static void vtd_address_space_unmap(VTDAddressSpace *as, IOMMUNotifier *n)
{
hwaddr size, remain;
hwaddr start = n->start;
hwaddr end = n->end;
IntelIOMMUState *s = as->iommu_state;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
DMAMap map;
/*
* Note: all the codes in this function has a assumption that IOVA
* bits are no more than VTD_MGAW bits (which is restricted by
* VT-d spec), otherwise we need to consider overflow of 64 bits.
*/
if (end > VTD_ADDRESS_SIZE(s->aw_bits) - 1) {
/*
* Don't need to unmap regions that is bigger than the whole
* VT-d supported address space size
*/
end = VTD_ADDRESS_SIZE(s->aw_bits) - 1;
}
assert(start <= end);
size = remain = end - start + 1;
while (remain >= VTD_PAGE_SIZE) {
IOMMUTLBEvent event;
uint64_t mask = get_naturally_aligned_size(start, remain, s->aw_bits);
assert(mask);
event.type = IOMMU_NOTIFIER_UNMAP;
event.entry.iova = start;
event.entry.addr_mask = mask - 1;
event.entry.target_as = &address_space_memory;
event.entry.perm = IOMMU_NONE;
/* This field is meaningless for unmap */
event.entry.translated_addr = 0;
memory_region_notify_iommu_one(n, &event);
start += mask;
remain -= mask;
}
assert(!remain);
trace_vtd_as_unmap_whole(pci_bus_num(as->bus),
VTD_PCI_SLOT(as->devfn),
VTD_PCI_FUNC(as->devfn),
n->start, size);
map.iova = n->start;
map.size = size;
intel-iommu: rework the page walk logic This patch fixes a potential small window that the DMA page table might be incomplete or invalid when the guest sends domain/context invalidations to a device. This can cause random DMA errors for assigned devices. This is a major change to the VT-d shadow page walking logic. It includes but is not limited to: - For each VTDAddressSpace, now we maintain what IOVA ranges we have mapped and what we have not. With that information, now we only send MAP or UNMAP when necessary. Say, we don't send MAP notifies if we know we have already mapped the range, meanwhile we don't send UNMAP notifies if we know we never mapped the range at all. - Introduce vtd_sync_shadow_page_table[_range] APIs so that we can call in any places to resync the shadow page table for a device. - When we receive domain/context invalidation, we should not really run the replay logic, instead we use the new sync shadow page table API to resync the whole shadow page table without unmapping the whole region. After this change, we'll only do the page walk once for each domain invalidations (before this, it can be multiple, depending on number of notifiers per address space). While at it, the page walking logic is also refactored to be simpler. CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Jintack Lim <jintack@cs.columbia.edu> Tested-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-18 10:25:17 +03:00
iova_tree_remove(as->iova_tree, &map);
}
static void vtd_address_space_unmap_all(IntelIOMMUState *s)
{
VTDAddressSpace *vtd_as;
IOMMUNotifier *n;
QLIST_FOREACH(vtd_as, &s->vtd_as_with_notifiers, next) {
IOMMU_NOTIFIER_FOREACH(n, &vtd_as->iommu) {
vtd_address_space_unmap(vtd_as, n);
}
}
}
intel_iommu: better handling of dmar state switch QEMU is not handling the global DMAR switch well, especially when from "on" to "off". Let's first take the example of system reset. Assuming that a guest has IOMMU enabled. When it reboots, we will drop all the existing DMAR mappings to handle the system reset, however we'll still keep the existing memory layouts which has the IOMMU memory region enabled. So after the reboot and before the kernel reloads again, there will be no mapping at all for the host device. That's problematic since any software (for example, SeaBIOS) that runs earlier than the kernel after the reboot will assume the IOMMU is disabled, so any DMA from the software will fail. For example, a guest that boots on an assigned NVMe device might fail to find the boot device after a system reboot/reset and we'll be able to observe SeaBIOS errors if we capture the debugging log: WARNING - Timeout at nvme_wait:144! Meanwhile, we should see DMAR errors on the host of that NVMe device. It's the DMA fault that caused a NVMe driver timeout. The correct fix should be that we do proper switching of device DMA address spaces when system resets, which will setup correct memory regions and notify the backend of the devices. This might not affect much on non-assigned devices since QEMU VT-d emulation will assume a default passthrough mapping if DMAR is not enabled in the GCMD register (please refer to vtd_iommu_translate). However that's required for an assigned devices, since that'll rebuild the correct GPA to HPA mapping that is needed for any DMA operation during guest bootstrap. Besides the system reset, we have some other places that might change the global DMAR status and we'd better do the same thing there. For example, when we change the state of GCMD register, or the DMAR root pointer. Do the same refresh for all these places. For these two places we'll also need to explicitly invalidate the context entry cache and iotlb cache. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173 CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> -- v2: - do the same for GCMD write, or root pointer update [Alex] - test is carried out by me this time, by observing the vtd_switch_address_space tracepoint after system reboot v3: - rewrite commit message as suggested by Alex Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-29 06:36:15 +03:00
static void vtd_address_space_refresh_all(IntelIOMMUState *s)
{
vtd_address_space_unmap_all(s);
vtd_switch_address_space_all(s);
}
static int vtd_replay_hook(IOMMUTLBEvent *event, void *private)
{
memory_region_notify_iommu_one(private, event);
return 0;
}
static void vtd_iommu_replay(IOMMUMemoryRegion *iommu_mr, IOMMUNotifier *n)
{
VTDAddressSpace *vtd_as = container_of(iommu_mr, VTDAddressSpace, iommu);
IntelIOMMUState *s = vtd_as->iommu_state;
uint8_t bus_n = pci_bus_num(vtd_as->bus);
VTDContextEntry ce;
/*
* The replay can be triggered by either a invalidation or a newly
* created entry. No matter what, we release existing mappings
* (it means flushing caches for UNMAP-only registers).
*/
vtd_address_space_unmap(vtd_as, n);
if (vtd_dev_to_context_entry(s, bus_n, vtd_as->devfn, &ce) == 0) {
trace_vtd_replay_ce_valid(s->root_scalable ? "scalable mode" :
"legacy mode",
bus_n, PCI_SLOT(vtd_as->devfn),
PCI_FUNC(vtd_as->devfn),
vtd_get_domain_id(s, &ce),
ce.hi, ce.lo);
if (vtd_as_has_map_notifier(vtd_as)) {
/* This is required only for MAP typed notifiers */
vtd_page_walk_info info = {
.hook_fn = vtd_replay_hook,
.private = (void *)n,
.notify_unmap = false,
.aw = s->aw_bits,
.as = vtd_as,
.domain_id = vtd_get_domain_id(s, &ce),
};
vtd_page_walk(s, &ce, 0, ~0ULL, &info);
}
} else {
trace_vtd_replay_ce_invalid(bus_n, PCI_SLOT(vtd_as->devfn),
PCI_FUNC(vtd_as->devfn));
}
return;
}
/* Do the initialization. It will also be called when reset, so pay
* attention when adding new initialization stuff.
*/
static void vtd_init(IntelIOMMUState *s)
{
X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(s);
memset(s->csr, 0, DMAR_REG_SIZE);
memset(s->wmask, 0, DMAR_REG_SIZE);
memset(s->w1cmask, 0, DMAR_REG_SIZE);
memset(s->womask, 0, DMAR_REG_SIZE);
s->root = 0;
s->root_scalable = false;
s->dmar_enabled = false;
s->intr_enabled = false;
s->iq_head = 0;
s->iq_tail = 0;
s->iq = 0;
s->iq_size = 0;
s->qi_enabled = false;
s->iq_last_desc_type = VTD_INV_DESC_NONE;
s->iq_dw = false;
s->next_frcd_reg = 0;
s->cap = VTD_CAP_FRO | VTD_CAP_NFR | VTD_CAP_ND |
VTD_CAP_MAMV | VTD_CAP_PSI | VTD_CAP_SLLPS |
VTD_CAP_SAGAW_39bit | VTD_CAP_MGAW(s->aw_bits);
if (s->dma_drain) {
s->cap |= VTD_CAP_DRAIN;
}
if (s->aw_bits == VTD_HOST_AW_48BIT) {
s->cap |= VTD_CAP_SAGAW_48bit;
}
s->ecap = VTD_ECAP_QI | VTD_ECAP_IRO;
/*
* Rsvd field masks for spte
*/
vtd_spte_rsvd[0] = ~0ULL;
vtd_spte_rsvd[1] = VTD_SPTE_PAGE_L1_RSVD_MASK(s->aw_bits,
x86_iommu->dt_supported);
vtd_spte_rsvd[2] = VTD_SPTE_PAGE_L2_RSVD_MASK(s->aw_bits);
vtd_spte_rsvd[3] = VTD_SPTE_PAGE_L3_RSVD_MASK(s->aw_bits);
vtd_spte_rsvd[4] = VTD_SPTE_PAGE_L4_RSVD_MASK(s->aw_bits);
vtd_spte_rsvd_large[2] = VTD_SPTE_LPAGE_L2_RSVD_MASK(s->aw_bits,
x86_iommu->dt_supported);
vtd_spte_rsvd_large[3] = VTD_SPTE_LPAGE_L3_RSVD_MASK(s->aw_bits,
x86_iommu->dt_supported);
if (x86_iommu_ir_supported(x86_iommu)) {
s->ecap |= VTD_ECAP_IR | VTD_ECAP_MHMV;
if (s->intr_eim == ON_OFF_AUTO_ON) {
s->ecap |= VTD_ECAP_EIM;
}
assert(s->intr_eim != ON_OFF_AUTO_AUTO);
}
if (x86_iommu->dt_supported) {
s->ecap |= VTD_ECAP_DT;
}
if (x86_iommu->pt_supported) {
s->ecap |= VTD_ECAP_PT;
}
if (s->caching_mode) {
s->cap |= VTD_CAP_CM;
}
/* TODO: read cap/ecap from host to decide which cap to be exposed. */
if (s->scalable_mode) {
s->ecap |= VTD_ECAP_SMTS | VTD_ECAP_SRS | VTD_ECAP_SLTS;
}
vtd_reset_caches(s);
/* Define registers with default values and bit semantics */
vtd_define_long(s, DMAR_VER_REG, 0x10UL, 0, 0);
vtd_define_quad(s, DMAR_CAP_REG, s->cap, 0, 0);
vtd_define_quad(s, DMAR_ECAP_REG, s->ecap, 0, 0);
vtd_define_long(s, DMAR_GCMD_REG, 0, 0xff800000UL, 0);
vtd_define_long_wo(s, DMAR_GCMD_REG, 0xff800000UL);
vtd_define_long(s, DMAR_GSTS_REG, 0, 0, 0);
vtd_define_quad(s, DMAR_RTADDR_REG, 0, 0xfffffffffffffc00ULL, 0);
vtd_define_quad(s, DMAR_CCMD_REG, 0, 0xe0000003ffffffffULL, 0);
vtd_define_quad_wo(s, DMAR_CCMD_REG, 0x3ffff0000ULL);
/* Advanced Fault Logging not supported */
vtd_define_long(s, DMAR_FSTS_REG, 0, 0, 0x11UL);
vtd_define_long(s, DMAR_FECTL_REG, 0x80000000UL, 0x80000000UL, 0);
vtd_define_long(s, DMAR_FEDATA_REG, 0, 0x0000ffffUL, 0);
vtd_define_long(s, DMAR_FEADDR_REG, 0, 0xfffffffcUL, 0);
/* Treated as RsvdZ when EIM in ECAP_REG is not supported
* vtd_define_long(s, DMAR_FEUADDR_REG, 0, 0xffffffffUL, 0);
*/
vtd_define_long(s, DMAR_FEUADDR_REG, 0, 0, 0);
/* Treated as RO for implementations that PLMR and PHMR fields reported
* as Clear in the CAP_REG.
* vtd_define_long(s, DMAR_PMEN_REG, 0, 0x80000000UL, 0);
*/
vtd_define_long(s, DMAR_PMEN_REG, 0, 0, 0);
vtd_define_quad(s, DMAR_IQH_REG, 0, 0, 0);
vtd_define_quad(s, DMAR_IQT_REG, 0, 0x7fff0ULL, 0);
vtd_define_quad(s, DMAR_IQA_REG, 0, 0xfffffffffffff807ULL, 0);
vtd_define_long(s, DMAR_ICS_REG, 0, 0, 0x1UL);
vtd_define_long(s, DMAR_IECTL_REG, 0x80000000UL, 0x80000000UL, 0);
vtd_define_long(s, DMAR_IEDATA_REG, 0, 0xffffffffUL, 0);
vtd_define_long(s, DMAR_IEADDR_REG, 0, 0xfffffffcUL, 0);
/* Treadted as RsvdZ when EIM in ECAP_REG is not supported */
vtd_define_long(s, DMAR_IEUADDR_REG, 0, 0, 0);
/* IOTLB registers */
vtd_define_quad(s, DMAR_IOTLB_REG, 0, 0Xb003ffff00000000ULL, 0);
vtd_define_quad(s, DMAR_IVA_REG, 0, 0xfffffffffffff07fULL, 0);
vtd_define_quad_wo(s, DMAR_IVA_REG, 0xfffffffffffff07fULL);
/* Fault Recording Registers, 128-bit */
vtd_define_quad(s, DMAR_FRCD_REG_0_0, 0, 0, 0);
vtd_define_quad(s, DMAR_FRCD_REG_0_2, 0, 0, 0x8000000000000000ULL);
/*
* Interrupt remapping registers.
*/
vtd_define_quad(s, DMAR_IRTA_REG, 0, 0xfffffffffffff80fULL, 0);
}
/* Should not reset address_spaces when reset because devices will still use
* the address space they got at first (won't ask the bus again).
*/
static void vtd_reset(DeviceState *dev)
{
IntelIOMMUState *s = INTEL_IOMMU_DEVICE(dev);
vtd_init(s);
intel_iommu: better handling of dmar state switch QEMU is not handling the global DMAR switch well, especially when from "on" to "off". Let's first take the example of system reset. Assuming that a guest has IOMMU enabled. When it reboots, we will drop all the existing DMAR mappings to handle the system reset, however we'll still keep the existing memory layouts which has the IOMMU memory region enabled. So after the reboot and before the kernel reloads again, there will be no mapping at all for the host device. That's problematic since any software (for example, SeaBIOS) that runs earlier than the kernel after the reboot will assume the IOMMU is disabled, so any DMA from the software will fail. For example, a guest that boots on an assigned NVMe device might fail to find the boot device after a system reboot/reset and we'll be able to observe SeaBIOS errors if we capture the debugging log: WARNING - Timeout at nvme_wait:144! Meanwhile, we should see DMAR errors on the host of that NVMe device. It's the DMA fault that caused a NVMe driver timeout. The correct fix should be that we do proper switching of device DMA address spaces when system resets, which will setup correct memory regions and notify the backend of the devices. This might not affect much on non-assigned devices since QEMU VT-d emulation will assume a default passthrough mapping if DMAR is not enabled in the GCMD register (please refer to vtd_iommu_translate). However that's required for an assigned devices, since that'll rebuild the correct GPA to HPA mapping that is needed for any DMA operation during guest bootstrap. Besides the system reset, we have some other places that might change the global DMAR status and we'd better do the same thing there. For example, when we change the state of GCMD register, or the DMAR root pointer. Do the same refresh for all these places. For these two places we'll also need to explicitly invalidate the context entry cache and iotlb cache. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1625173 CC: QEMU Stable <qemu-stable@nongnu.org> Reported-by: Cong Li <coli@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> -- v2: - do the same for GCMD write, or root pointer update [Alex] - test is carried out by me this time, by observing the vtd_switch_address_space tracepoint after system reboot v3: - rewrite commit message as suggested by Alex Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-29 06:36:15 +03:00
vtd_address_space_refresh_all(s);
}
static AddressSpace *vtd_host_dma_iommu(PCIBus *bus, void *opaque, int devfn)
{
IntelIOMMUState *s = opaque;
VTDAddressSpace *vtd_as;
assert(0 <= devfn && devfn < PCI_DEVFN_MAX);
vtd_as = vtd_find_add_as(s, bus, devfn);
return &vtd_as->as;
}
static bool vtd_decide_config(IntelIOMMUState *s, Error **errp)
{
X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(s);
if (s->intr_eim == ON_OFF_AUTO_ON && !x86_iommu_ir_supported(x86_iommu)) {
error_setg(errp, "eim=on cannot be selected without intremap=on");
return false;
}
if (s->intr_eim == ON_OFF_AUTO_AUTO) {
intel_iommu: reject broken EIM Cluster x2APIC cannot work without KVM's x2apic API when the maximal APIC ID is greater than 8 and only KVM's LAPIC can support x2APIC, so we forbid other APICs and also the old KVM case with less than 9, to simplify the code. There is no point in enabling EIM in forbidden APICs, so we keep it enabled only for the KVM APIC; unconditionally, because making the option depend on KVM version would be a maintanance burden. Old QEMUs would enable eim whenever intremap was on, which would trick guests into thinking that they can enable cluster x2APIC even if any interrupt destination would get clamped to 8 bits. Depending on your configuration, QEMU could notice that the destination LAPIC is not present and report it with a very non-obvious: KVM: injection failed, MSI lost (Operation not permitted) Or the guest could say something about unexpected interrupts, because clamping leads to aliasing so interrupts were being delivered to incorrect VCPUs. KVM_X2APIC_API is the feature that allows us to enable EIM for KVM. QEMU 2.7 allowed EIM whenever interrupt remapping was enabled. In order to keep backward compatibility, we again allow guests to misbehave in non-obvious ways, and make it the default for old machine types. A user can enable the buggy mode it with "x-buggy-eim=on". Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-10 18:28:47 +03:00
s->intr_eim = (kvm_irqchip_in_kernel() || s->buggy_eim)
&& x86_iommu_ir_supported(x86_iommu) ?
ON_OFF_AUTO_ON : ON_OFF_AUTO_OFF;
}
intel_iommu: reject broken EIM Cluster x2APIC cannot work without KVM's x2apic API when the maximal APIC ID is greater than 8 and only KVM's LAPIC can support x2APIC, so we forbid other APICs and also the old KVM case with less than 9, to simplify the code. There is no point in enabling EIM in forbidden APICs, so we keep it enabled only for the KVM APIC; unconditionally, because making the option depend on KVM version would be a maintanance burden. Old QEMUs would enable eim whenever intremap was on, which would trick guests into thinking that they can enable cluster x2APIC even if any interrupt destination would get clamped to 8 bits. Depending on your configuration, QEMU could notice that the destination LAPIC is not present and report it with a very non-obvious: KVM: injection failed, MSI lost (Operation not permitted) Or the guest could say something about unexpected interrupts, because clamping leads to aliasing so interrupts were being delivered to incorrect VCPUs. KVM_X2APIC_API is the feature that allows us to enable EIM for KVM. QEMU 2.7 allowed EIM whenever interrupt remapping was enabled. In order to keep backward compatibility, we again allow guests to misbehave in non-obvious ways, and make it the default for old machine types. A user can enable the buggy mode it with "x-buggy-eim=on". Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-10 18:28:47 +03:00
if (s->intr_eim == ON_OFF_AUTO_ON && !s->buggy_eim) {
if (!kvm_irqchip_in_kernel()) {
error_setg(errp, "eim=on requires accel=kvm,kernel-irqchip=split");
return false;
}
if (!kvm_enable_x2apic()) {
error_setg(errp, "eim=on requires support on the KVM side"
"(X2APIC_API, first shipped in v4.7)");
return false;
}
}
/* Currently only address widths supported are 39 and 48 bits */
if ((s->aw_bits != VTD_HOST_AW_39BIT) &&
(s->aw_bits != VTD_HOST_AW_48BIT)) {
error_setg(errp, "Supported values for aw-bits are: %d, %d",
VTD_HOST_AW_39BIT, VTD_HOST_AW_48BIT);
return false;
}
if (s->scalable_mode && !s->dma_drain) {
error_setg(errp, "Need to set dma_drain for scalable mode");
return false;
}
return true;
}
static int vtd_machine_done_notify_one(Object *child, void *unused)
{
IntelIOMMUState *iommu = INTEL_IOMMU_DEVICE(x86_iommu_get_default());
/*
* We hard-coded here because vfio-pci is the only special case
* here. Let's be more elegant in the future when we can, but so
* far there seems to be no better way.
*/
if (object_dynamic_cast(child, "vfio-pci") && !iommu->caching_mode) {
vtd_panic_require_caching_mode();
}
return 0;
}
static void vtd_machine_done_hook(Notifier *notifier, void *unused)
{
object_child_foreach_recursive(object_get_root(),
vtd_machine_done_notify_one, NULL);
}
static Notifier vtd_machine_done_notify = {
.notify = vtd_machine_done_hook,
};
static void vtd_realize(DeviceState *dev, Error **errp)
{
MachineState *ms = MACHINE(qdev_get_machine());
PCMachineState *pcms = PC_MACHINE(ms);
X86MachineState *x86ms = X86_MACHINE(ms);
PCIBus *bus = pcms->bus;
IntelIOMMUState *s = INTEL_IOMMU_DEVICE(dev);
X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(dev);
x86_iommu->type = TYPE_INTEL;
if (!vtd_decide_config(s, errp)) {
return;
}
QLIST_INIT(&s->vtd_as_with_notifiers);
qemu_mutex_init(&s->iommu_lock);
memset(s->vtd_as_by_bus_num, 0, sizeof(s->vtd_as_by_bus_num));
memory_region_init_io(&s->csrmem, OBJECT(s), &vtd_mem_ops, s,
"intel_iommu", DMAR_REG_SIZE);
/* Create the shared memory regions by all devices */
memory_region_init(&s->mr_nodmar, OBJECT(s), "vtd-nodmar",
UINT64_MAX);
memory_region_init_io(&s->mr_ir, OBJECT(s), &vtd_mem_ir_ops,
s, "vtd-ir", VTD_INTERRUPT_ADDR_SIZE);
memory_region_init_alias(&s->mr_sys_alias, OBJECT(s),
"vtd-sys-alias", get_system_memory(), 0,
memory_region_size(get_system_memory()));
memory_region_add_subregion_overlap(&s->mr_nodmar, 0,
&s->mr_sys_alias, 0);
memory_region_add_subregion_overlap(&s->mr_nodmar,
VTD_INTERRUPT_ADDR_FIRST,
&s->mr_ir, 1);
sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->csrmem);
/* No corresponding destroy */
s->iotlb = g_hash_table_new_full(vtd_uint64_hash, vtd_uint64_equal,
g_free, g_free);
s->vtd_as_by_busptr = g_hash_table_new_full(vtd_uint64_hash, vtd_uint64_equal,
g_free, g_free);
vtd_init(s);
sysbus_mmio_map(SYS_BUS_DEVICE(s), 0, Q35_HOST_BRIDGE_IOMMU_ADDR);
pci_setup_iommu(bus, vtd_host_dma_iommu, dev);
/* Pseudo address space under root PCI bus. */
x86ms->ioapic_as = vtd_host_dma_iommu(bus, s, Q35_PSEUDO_DEVFN_IOAPIC);
qemu_add_machine_init_done_notifier(&vtd_machine_done_notify);
}
static void vtd_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
X86IOMMUClass *x86_class = X86_IOMMU_DEVICE_CLASS(klass);
dc->reset = vtd_reset;
dc->vmsd = &vtd_vmstate;
device_class_set_props(dc, vtd_properties);
dc->hotpluggable = false;
x86_class->realize = vtd_realize;
x86_class->int_remap = vtd_int_remap;
/* Supported by the pc-q35-* machine types */
sysbus: Set user_creatable=false by default on TYPE_SYS_BUS_DEVICE commit 33cd52b5d7b9adfd009e95f07e6c64dd88ae2a31 unset cannot_instantiate_with_device_add_yet in TYPE_SYSBUS, making all sysbus devices appear on "-device help" and lack the "no-user" flag in "info qdm". To fix this, we can set user_creatable=false by default on TYPE_SYS_BUS_DEVICE, but this requires setting user_creatable=true explicitly on the sysbus devices that actually work with -device. Fortunately today we have just a few has_dynamic_sysbus=1 machines: virt, pc-q35-*, ppce500, and spapr. virt, ppce500, and spapr have extra checks to ensure just a few device types can be instantiated: * virt supports only TYPE_VFIO_CALXEDA_XGMAC, TYPE_VFIO_AMD_XGBE. * ppce500 supports only TYPE_ETSEC_COMMON. * spapr supports only TYPE_SPAPR_PCI_HOST_BRIDGE. This patch sets user_creatable=true explicitly on those 4 device classes. Now, the more complex cases: pc-q35-*: q35 has no sysbus device whitelist yet (which is a separate bug). We are in the process of fixing it and building a sysbus whitelist on q35, but in the meantime we can fix the "-device help" and "info qdm" bugs mentioned above. Also, despite not being strictly necessary for fixing the q35 bug, reducing the list of user_creatable=true devices will help us be more confident when building the q35 whitelist. xen: We also have a hack at xen_set_dynamic_sysbus(), that sets has_dynamic_sysbus=true at runtime when using the Xen accelerator. This hack is only used to allow xen-backend devices to be dynamically plugged/unplugged. This means today we can use -device with the following 22 device types, that are the ones compiled into the qemu-system-x86_64 and qemu-system-i386 binaries: * allwinner-ahci * amd-iommu * cfi.pflash01 * esp * fw_cfg_io * fw_cfg_mem * generic-sdhci * hpet * intel-iommu * ioapic * isabus-bridge * kvmclock * kvm-ioapic * kvmvapic * SUNW,fdtwo * sysbus-ahci * sysbus-fdc * sysbus-ohci * unimplemented-device * virtio-mmio * xen-backend * xen-sysdev This patch adds user_creatable=true explicitly to those devices, temporarily, just to keep 100% compatibility with existing behavior of q35. Subsequent patches will remove user_creatable=true from the devices that are really not meant to user-creatable on any machine, and remove the FIXME comment from the ones that are really supposed to be user-creatable. This is being done in separate patches because we still don't have an obvious list of devices that will be whitelisted by q35, and I would like to get each device reviewed individually. Cc: Alexander Graf <agraf@suse.de> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Frank Blaschka <frank.blaschka@de.ibm.com> Cc: Gabriel L. Somlo <somlo@cmu.edu> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Pierre Morel <pmorel@linux.vnet.ibm.com> Cc: Prasad J Pandit <pjp@fedoraproject.org> Cc: qemu-arm@nongnu.org Cc: qemu-block@nongnu.org Cc: qemu-ppc@nongnu.org Cc: Richard Henderson <rth@twiddle.net> Cc: Rob Herring <robh@kernel.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: sstabellini@kernel.org Cc: Thomas Huth <thuth@redhat.com> Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-3-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [ehabkost: Small changes at sysbus_device_class_init() comments] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-03 23:35:45 +03:00
dc->user_creatable = true;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
dc->desc = "Intel IOMMU (VT-d) DMA Remapping device";
}
static const TypeInfo vtd_info = {
.name = TYPE_INTEL_IOMMU_DEVICE,
.parent = TYPE_X86_IOMMU_DEVICE,
.instance_size = sizeof(IntelIOMMUState),
.class_init = vtd_class_init,
};
static void vtd_iommu_memory_region_class_init(ObjectClass *klass,
void *data)
{
IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
imrc->translate = vtd_iommu_translate;
imrc->notify_flag_changed = vtd_iommu_notify_flag_changed;
imrc->replay = vtd_iommu_replay;
}
static const TypeInfo vtd_iommu_memory_region_info = {
.parent = TYPE_IOMMU_MEMORY_REGION,
.name = TYPE_INTEL_IOMMU_MEMORY_REGION,
.class_init = vtd_iommu_memory_region_class_init,
};
static void vtd_register_types(void)
{
type_register_static(&vtd_info);
type_register_static(&vtd_iommu_memory_region_info);
}
type_init(vtd_register_types)