qemu/hw/intc/xive.c

2121 lines
63 KiB
C
Raw Normal View History

/*
* QEMU PowerPC XIVE interrupt controller model
*
* Copyright (c) 2017-2018, IBM Corporation.
*
* This code is licensed under the GPL version 2 or later. See the
* COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qapi/error.h"
#include "target/ppc/cpu.h"
#include "sysemu/cpus.h"
#include "sysemu/dma.h"
#include "sysemu/reset.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "monitor/monitor.h"
#include "hw/irq.h"
#include "hw/ppc/xive.h"
#include "hw/ppc/xive2.h"
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
#include "hw/ppc/xive_regs.h"
#include "trace.h"
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/*
* XIVE Thread Interrupt Management context
*/
/*
* Convert an Interrupt Pending Buffer (IPB) register to a Pending
* Interrupt Priority Register (PIPR), which contains the priority of
* the most favored pending notification.
*/
static uint8_t ipb_to_pipr(uint8_t ibp)
{
return ibp ? clz32((uint32_t)ibp << 24) : 0xff;
}
static uint8_t exception_mask(uint8_t ring)
{
switch (ring) {
case TM_QW1_OS:
return TM_QW1_NSR_EO;
case TM_QW3_HV_PHYS:
return TM_QW3_NSR_HE;
default:
g_assert_not_reached();
}
}
static qemu_irq xive_tctx_output(XiveTCTX *tctx, uint8_t ring)
{
switch (ring) {
case TM_QW0_USER:
return 0; /* Not supported */
case TM_QW1_OS:
return tctx->os_output;
case TM_QW2_HV_POOL:
case TM_QW3_HV_PHYS:
return tctx->hv_output;
default:
return 0;
}
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
static uint64_t xive_tctx_accept(XiveTCTX *tctx, uint8_t ring)
{
uint8_t *regs = &tctx->regs[ring];
uint8_t nsr = regs[TM_NSR];
uint8_t mask = exception_mask(ring);
qemu_irq_lower(xive_tctx_output(tctx, ring));
if (regs[TM_NSR] & mask) {
uint8_t cppr = regs[TM_PIPR];
regs[TM_CPPR] = cppr;
/* Reset the pending buffer bit */
regs[TM_IPB] &= ~xive_priority_to_ipb(cppr);
regs[TM_PIPR] = ipb_to_pipr(regs[TM_IPB]);
/* Drop Exception bit */
regs[TM_NSR] &= ~mask;
trace_xive_tctx_accept(tctx->cs->cpu_index, ring,
regs[TM_IPB], regs[TM_PIPR],
regs[TM_CPPR], regs[TM_NSR]);
}
return (nsr << 8) | regs[TM_CPPR];
}
static void xive_tctx_notify(XiveTCTX *tctx, uint8_t ring)
{
uint8_t *regs = &tctx->regs[ring];
if (regs[TM_PIPR] < regs[TM_CPPR]) {
switch (ring) {
case TM_QW1_OS:
regs[TM_NSR] |= TM_QW1_NSR_EO;
break;
case TM_QW3_HV_PHYS:
regs[TM_NSR] |= (TM_QW3_NSR_HE_PHYS << 6);
break;
default:
g_assert_not_reached();
}
trace_xive_tctx_notify(tctx->cs->cpu_index, ring,
regs[TM_IPB], regs[TM_PIPR],
regs[TM_CPPR], regs[TM_NSR]);
qemu_irq_raise(xive_tctx_output(tctx, ring));
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
ppc/xive: Update the state of the External interrupt signal When pulling or pushing an OS context from/to a CPU, we should re-evaluate the state of the External interrupt signal. Otherwise, we can end up catching the External interrupt exception in hypervisor mode, which is unexpected. The problem is best illustrated with the following scenario: 1. an External interrupt is raised while the guest is on the CPU. 2. before the guest can ack the External interrupt, an hypervisor interrupt is raised, for example the Hypervisor Decrementer or Hypervisor Virtualization interrupt. The hypervisor interrupt forces the guest to exit while the External interrupt is still pending. 3. the hypervisor handles the hypervisor interrupt. At this point, the External interrupt is still pending. So it's very likely to be delivered while the hypervisor is running. That's unexpected and can result in an infinite loop where the hypervisor catches the External interrupt, looks for an interrupt in its hypervisor queue, doesn't find any, exits the interrupt handler with the External interrupt still raised, repeat... The fix is simply to always lower the External interrupt signal when pulling an OS context. It means it needs to be raised again when re-pushing the OS context. Fortunately, it's already the case, as we now always call xive_tctx_ipb_update(), which will raise the signal if needed. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Message-Id: <20220429071620.177142-3-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-04-29 10:16:20 +03:00
void xive_tctx_reset_os_signal(XiveTCTX *tctx)
{
/*
* Lower the External interrupt. Used when pulling an OS
* context. It is necessary to avoid catching it in the hypervisor
* context. It should be raised again when re-pushing the OS
* context.
*/
qemu_irq_lower(xive_tctx_output(tctx, TM_QW1_OS));
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
static void xive_tctx_set_cppr(XiveTCTX *tctx, uint8_t ring, uint8_t cppr)
{
uint8_t *regs = &tctx->regs[ring];
trace_xive_tctx_set_cppr(tctx->cs->cpu_index, ring,
regs[TM_IPB], regs[TM_PIPR],
cppr, regs[TM_NSR]);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
if (cppr > XIVE_PRIORITY_MAX) {
cppr = 0xff;
}
tctx->regs[ring + TM_CPPR] = cppr;
/* CPPR has changed, check if we need to raise a pending exception */
xive_tctx_notify(tctx, ring);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
void xive_tctx_ipb_update(XiveTCTX *tctx, uint8_t ring, uint8_t ipb)
{
uint8_t *regs = &tctx->regs[ring];
regs[TM_IPB] |= ipb;
regs[TM_PIPR] = ipb_to_pipr(regs[TM_IPB]);
xive_tctx_notify(tctx, ring);
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/*
* XIVE Thread Interrupt Management Area (TIMA)
*/
static void xive_tm_set_hv_cppr(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, uint64_t value, unsigned size)
{
xive_tctx_set_cppr(tctx, TM_QW3_HV_PHYS, value & 0xff);
}
static uint64_t xive_tm_ack_hv_reg(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, unsigned size)
{
return xive_tctx_accept(tctx, TM_QW3_HV_PHYS);
}
static uint64_t xive_tm_pull_pool_ctx(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, unsigned size)
{
uint32_t qw2w2_prev = xive_tctx_word2(&tctx->regs[TM_QW2_HV_POOL]);
uint32_t qw2w2;
qw2w2 = xive_set_field32(TM_QW2W2_VP, qw2w2_prev, 0);
memcpy(&tctx->regs[TM_QW2_HV_POOL + TM_WORD2], &qw2w2, 4);
return qw2w2;
}
static void xive_tm_vt_push(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset,
uint64_t value, unsigned size)
{
tctx->regs[TM_QW3_HV_PHYS + TM_WORD2] = value & 0xff;
}
static uint64_t xive_tm_vt_poll(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, unsigned size)
{
return tctx->regs[TM_QW3_HV_PHYS + TM_WORD2] & 0xff;
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/*
* Define an access map for each page of the TIMA that we will use in
* the memory region ops to filter values when doing loads and stores
* of raw registers values
*
* Registers accessibility bits :
*
* 0x0 - no access
* 0x1 - write only
* 0x2 - read only
* 0x3 - read/write
*/
static const uint8_t xive_tm_hw_view[] = {
3, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, 0, 0, 0, 0, /* QW-0 User */
3, 3, 3, 3, 3, 3, 0, 2, 3, 3, 3, 3, 0, 0, 0, 0, /* QW-1 OS */
0, 0, 3, 3, 0, 0, 0, 0, 3, 3, 3, 3, 0, 0, 0, 0, /* QW-2 POOL */
3, 3, 3, 3, 0, 3, 0, 2, 3, 0, 0, 3, 3, 3, 3, 0, /* QW-3 PHYS */
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
};
static const uint8_t xive_tm_hv_view[] = {
3, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, 0, 0, 0, 0, /* QW-0 User */
3, 3, 3, 3, 3, 3, 0, 2, 3, 3, 3, 3, 0, 0, 0, 0, /* QW-1 OS */
0, 0, 3, 3, 0, 0, 0, 0, 0, 3, 3, 3, 0, 0, 0, 0, /* QW-2 POOL */
3, 3, 3, 3, 0, 3, 0, 2, 3, 0, 0, 3, 0, 0, 0, 0, /* QW-3 PHYS */
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
};
static const uint8_t xive_tm_os_view[] = {
3, 0, 0, 0, 0, 0, 0, 0, 3, 3, 3, 3, 0, 0, 0, 0, /* QW-0 User */
2, 3, 2, 2, 2, 2, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, /* QW-1 OS */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* QW-2 POOL */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* QW-3 PHYS */
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
};
static const uint8_t xive_tm_user_view[] = {
3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* QW-0 User */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* QW-1 OS */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* QW-2 POOL */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* QW-3 PHYS */
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
};
/*
* Overall TIMA access map for the thread interrupt management context
* registers
*/
static const uint8_t *xive_tm_views[] = {
[XIVE_TM_HW_PAGE] = xive_tm_hw_view,
[XIVE_TM_HV_PAGE] = xive_tm_hv_view,
[XIVE_TM_OS_PAGE] = xive_tm_os_view,
[XIVE_TM_USER_PAGE] = xive_tm_user_view,
};
/*
* Computes a register access mask for a given offset in the TIMA
*/
static uint64_t xive_tm_mask(hwaddr offset, unsigned size, bool write)
{
uint8_t page_offset = (offset >> TM_SHIFT) & 0x3;
uint8_t reg_offset = offset & TM_REG_OFFSET;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
uint8_t reg_mask = write ? 0x1 : 0x2;
uint64_t mask = 0x0;
int i;
for (i = 0; i < size; i++) {
if (xive_tm_views[page_offset][reg_offset + i] & reg_mask) {
mask |= (uint64_t) 0xff << (8 * (size - i - 1));
}
}
return mask;
}
static void xive_tm_raw_write(XiveTCTX *tctx, hwaddr offset, uint64_t value,
unsigned size)
{
uint8_t ring_offset = offset & TM_RING_OFFSET;
uint8_t reg_offset = offset & TM_REG_OFFSET;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
uint64_t mask = xive_tm_mask(offset, size, true);
int i;
/*
* Only 4 or 8 bytes stores are allowed and the User ring is
* excluded
*/
if (size < 4 || !mask || ring_offset == TM_QW0_USER) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid write access at TIMA @%"
HWADDR_PRIx"\n", offset);
return;
}
/*
* Use the register offset for the raw values and filter out
* reserved values
*/
for (i = 0; i < size; i++) {
uint8_t byte_mask = (mask >> (8 * (size - i - 1)));
if (byte_mask) {
tctx->regs[reg_offset + i] = (value >> (8 * (size - i - 1))) &
byte_mask;
}
}
}
static uint64_t xive_tm_raw_read(XiveTCTX *tctx, hwaddr offset, unsigned size)
{
uint8_t ring_offset = offset & TM_RING_OFFSET;
uint8_t reg_offset = offset & TM_REG_OFFSET;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
uint64_t mask = xive_tm_mask(offset, size, false);
uint64_t ret;
int i;
/*
* Only 4 or 8 bytes loads are allowed and the User ring is
* excluded
*/
if (size < 4 || !mask || ring_offset == TM_QW0_USER) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid read access at TIMA @%"
HWADDR_PRIx"\n", offset);
return -1;
}
/* Use the register offset for the raw values */
ret = 0;
for (i = 0; i < size; i++) {
ret |= (uint64_t) tctx->regs[reg_offset + i] << (8 * (size - i - 1));
}
/* filter out reserved values */
return ret & mask;
}
/*
* The TM context is mapped twice within each page. Stores and loads
* to the first mapping below 2K write and read the specified values
* without modification. The second mapping above 2K performs specific
* state changes (side effects) in addition to setting/returning the
* interrupt management area context of the processor thread.
*/
static uint64_t xive_tm_ack_os_reg(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, unsigned size)
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
{
return xive_tctx_accept(tctx, TM_QW1_OS);
}
static void xive_tm_set_os_cppr(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, uint64_t value, unsigned size)
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
{
xive_tctx_set_cppr(tctx, TM_QW1_OS, value & 0xff);
}
/*
* Adjust the IPB to allow a CPU to process event queues of other
* priorities during one physical interrupt cycle.
*/
static void xive_tm_set_os_pending(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, uint64_t value, unsigned size)
{
xive_tctx_ipb_update(tctx, TM_QW1_OS, xive_priority_to_ipb(value & 0xff));
}
static void xive_os_cam_decode(uint32_t cam, uint8_t *nvt_blk,
uint32_t *nvt_idx, bool *vo)
{
if (nvt_blk) {
*nvt_blk = xive_nvt_blk(cam);
}
if (nvt_idx) {
*nvt_idx = xive_nvt_idx(cam);
}
if (vo) {
*vo = !!(cam & TM_QW1W2_VO);
}
}
static uint32_t xive_tctx_get_os_cam(XiveTCTX *tctx, uint8_t *nvt_blk,
uint32_t *nvt_idx, bool *vo)
{
uint32_t qw1w2 = xive_tctx_word2(&tctx->regs[TM_QW1_OS]);
uint32_t cam = be32_to_cpu(qw1w2);
xive_os_cam_decode(cam, nvt_blk, nvt_idx, vo);
return qw1w2;
}
static void xive_tctx_set_os_cam(XiveTCTX *tctx, uint32_t qw1w2)
{
memcpy(&tctx->regs[TM_QW1_OS + TM_WORD2], &qw1w2, 4);
}
static uint64_t xive_tm_pull_os_ctx(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, unsigned size)
{
uint32_t qw1w2;
uint32_t qw1w2_new;
uint8_t nvt_blk;
uint32_t nvt_idx;
bool vo;
qw1w2 = xive_tctx_get_os_cam(tctx, &nvt_blk, &nvt_idx, &vo);
if (!vo) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: pulling invalid NVT %x/%x !?\n",
nvt_blk, nvt_idx);
}
/* Invalidate CAM line */
qw1w2_new = xive_set_field32(TM_QW1W2_VO, qw1w2, 0);
xive_tctx_set_os_cam(tctx, qw1w2_new);
ppc/xive: Update the state of the External interrupt signal When pulling or pushing an OS context from/to a CPU, we should re-evaluate the state of the External interrupt signal. Otherwise, we can end up catching the External interrupt exception in hypervisor mode, which is unexpected. The problem is best illustrated with the following scenario: 1. an External interrupt is raised while the guest is on the CPU. 2. before the guest can ack the External interrupt, an hypervisor interrupt is raised, for example the Hypervisor Decrementer or Hypervisor Virtualization interrupt. The hypervisor interrupt forces the guest to exit while the External interrupt is still pending. 3. the hypervisor handles the hypervisor interrupt. At this point, the External interrupt is still pending. So it's very likely to be delivered while the hypervisor is running. That's unexpected and can result in an infinite loop where the hypervisor catches the External interrupt, looks for an interrupt in its hypervisor queue, doesn't find any, exits the interrupt handler with the External interrupt still raised, repeat... The fix is simply to always lower the External interrupt signal when pulling an OS context. It means it needs to be raised again when re-pushing the OS context. Fortunately, it's already the case, as we now always call xive_tctx_ipb_update(), which will raise the signal if needed. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Message-Id: <20220429071620.177142-3-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-04-29 10:16:20 +03:00
xive_tctx_reset_os_signal(tctx);
return qw1w2;
}
static void xive_tctx_need_resend(XiveRouter *xrtr, XiveTCTX *tctx,
uint8_t nvt_blk, uint32_t nvt_idx)
{
XiveNVT nvt;
uint8_t ipb;
/*
* Grab the associated NVT to pull the pending bits, and merge
* them with the IPB of the thread interrupt context registers
*/
if (xive_router_get_nvt(xrtr, nvt_blk, nvt_idx, &nvt)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid NVT %x/%x\n",
nvt_blk, nvt_idx);
return;
}
ipb = xive_get_field32(NVT_W4_IPB, nvt.w4);
if (ipb) {
/* Reset the NVT value */
nvt.w4 = xive_set_field32(NVT_W4_IPB, nvt.w4, 0);
xive_router_write_nvt(xrtr, nvt_blk, nvt_idx, &nvt, 4);
}
/*
* Always call xive_tctx_ipb_update(). Even if there were no
* escalation triggered, there could be a pending interrupt which
* was saved when the context was pulled and that we need to take
* into account by recalculating the PIPR (which is not
* saved/restored).
ppc/xive: Update the state of the External interrupt signal When pulling or pushing an OS context from/to a CPU, we should re-evaluate the state of the External interrupt signal. Otherwise, we can end up catching the External interrupt exception in hypervisor mode, which is unexpected. The problem is best illustrated with the following scenario: 1. an External interrupt is raised while the guest is on the CPU. 2. before the guest can ack the External interrupt, an hypervisor interrupt is raised, for example the Hypervisor Decrementer or Hypervisor Virtualization interrupt. The hypervisor interrupt forces the guest to exit while the External interrupt is still pending. 3. the hypervisor handles the hypervisor interrupt. At this point, the External interrupt is still pending. So it's very likely to be delivered while the hypervisor is running. That's unexpected and can result in an infinite loop where the hypervisor catches the External interrupt, looks for an interrupt in its hypervisor queue, doesn't find any, exits the interrupt handler with the External interrupt still raised, repeat... The fix is simply to always lower the External interrupt signal when pulling an OS context. It means it needs to be raised again when re-pushing the OS context. Fortunately, it's already the case, as we now always call xive_tctx_ipb_update(), which will raise the signal if needed. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Message-Id: <20220429071620.177142-3-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-04-29 10:16:20 +03:00
* It will also raise the External interrupt signal if needed.
*/
xive_tctx_ipb_update(tctx, TM_QW1_OS, ipb);
}
/*
* Updating the OS CAM line can trigger a resend of interrupt
*/
static void xive_tm_push_os_ctx(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset, uint64_t value, unsigned size)
{
uint32_t cam = value;
uint32_t qw1w2 = cpu_to_be32(cam);
uint8_t nvt_blk;
uint32_t nvt_idx;
bool vo;
xive_os_cam_decode(cam, &nvt_blk, &nvt_idx, &vo);
/* First update the registers */
xive_tctx_set_os_cam(tctx, qw1w2);
/* Check the interrupt pending bits */
if (vo) {
xive_tctx_need_resend(XIVE_ROUTER(xptr), tctx, nvt_blk, nvt_idx);
}
}
static uint32_t xive_presenter_get_config(XivePresenter *xptr)
{
XivePresenterClass *xpc = XIVE_PRESENTER_GET_CLASS(xptr);
return xpc->get_config(xptr);
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/*
* Define a mapping of "special" operations depending on the TIMA page
* offset and the size of the operation.
*/
typedef struct XiveTmOp {
uint8_t page_offset;
uint32_t op_offset;
unsigned size;
void (*write_handler)(XivePresenter *xptr, XiveTCTX *tctx,
hwaddr offset,
uint64_t value, unsigned size);
uint64_t (*read_handler)(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset,
unsigned size);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
} XiveTmOp;
static const XiveTmOp xive_tm_operations[] = {
/*
* MMIOs below 2K : raw values and special operations without side
* effects
*/
{ XIVE_TM_OS_PAGE, TM_QW1_OS + TM_CPPR, 1, xive_tm_set_os_cppr, NULL },
{ XIVE_TM_HV_PAGE, TM_QW1_OS + TM_WORD2, 4, xive_tm_push_os_ctx, NULL },
{ XIVE_TM_HV_PAGE, TM_QW3_HV_PHYS + TM_CPPR, 1, xive_tm_set_hv_cppr, NULL },
{ XIVE_TM_HV_PAGE, TM_QW3_HV_PHYS + TM_WORD2, 1, xive_tm_vt_push, NULL },
{ XIVE_TM_HV_PAGE, TM_QW3_HV_PHYS + TM_WORD2, 1, NULL, xive_tm_vt_poll },
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/* MMIOs above 2K : special operations with side effects */
{ XIVE_TM_OS_PAGE, TM_SPC_ACK_OS_REG, 2, NULL, xive_tm_ack_os_reg },
{ XIVE_TM_OS_PAGE, TM_SPC_SET_OS_PENDING, 1, xive_tm_set_os_pending, NULL },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_OS_CTX, 4, NULL, xive_tm_pull_os_ctx },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_OS_CTX, 8, NULL, xive_tm_pull_os_ctx },
{ XIVE_TM_HV_PAGE, TM_SPC_ACK_HV_REG, 2, NULL, xive_tm_ack_hv_reg },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_POOL_CTX, 4, NULL, xive_tm_pull_pool_ctx },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_POOL_CTX, 8, NULL, xive_tm_pull_pool_ctx },
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
};
static const XiveTmOp xive2_tm_operations[] = {
/*
* MMIOs below 2K : raw values and special operations without side
* effects
*/
{ XIVE_TM_OS_PAGE, TM_QW1_OS + TM_CPPR, 1, xive_tm_set_os_cppr, NULL },
{ XIVE_TM_HV_PAGE, TM_QW1_OS + TM_WORD2, 4, xive2_tm_push_os_ctx, NULL },
{ XIVE_TM_HV_PAGE, TM_QW3_HV_PHYS + TM_CPPR, 1, xive_tm_set_hv_cppr, NULL },
{ XIVE_TM_HV_PAGE, TM_QW3_HV_PHYS + TM_WORD2, 1, xive_tm_vt_push, NULL },
{ XIVE_TM_HV_PAGE, TM_QW3_HV_PHYS + TM_WORD2, 1, NULL, xive_tm_vt_poll },
/* MMIOs above 2K : special operations with side effects */
{ XIVE_TM_OS_PAGE, TM_SPC_ACK_OS_REG, 2, NULL, xive_tm_ack_os_reg },
{ XIVE_TM_OS_PAGE, TM_SPC_SET_OS_PENDING, 1, xive_tm_set_os_pending, NULL },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_OS_CTX, 4, NULL, xive2_tm_pull_os_ctx },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_OS_CTX, 8, NULL, xive2_tm_pull_os_ctx },
{ XIVE_TM_HV_PAGE, TM_SPC_ACK_HV_REG, 2, NULL, xive_tm_ack_hv_reg },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_POOL_CTX, 4, NULL, xive_tm_pull_pool_ctx },
{ XIVE_TM_HV_PAGE, TM_SPC_PULL_POOL_CTX, 8, NULL, xive_tm_pull_pool_ctx },
};
static const XiveTmOp *xive_tm_find_op(XivePresenter *xptr, hwaddr offset,
unsigned size, bool write)
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
{
uint8_t page_offset = (offset >> TM_SHIFT) & 0x3;
uint32_t op_offset = offset & TM_ADDRESS_MASK;
const XiveTmOp *tm_ops;
int i, tm_ops_count;
uint32_t cfg;
cfg = xive_presenter_get_config(xptr);
if (cfg & XIVE_PRESENTER_GEN1_TIMA_OS) {
tm_ops = xive_tm_operations;
tm_ops_count = ARRAY_SIZE(xive_tm_operations);
} else {
tm_ops = xive2_tm_operations;
tm_ops_count = ARRAY_SIZE(xive2_tm_operations);
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
for (i = 0; i < tm_ops_count; i++) {
const XiveTmOp *xto = &tm_ops[i];
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/* Accesses done from a more privileged TIMA page is allowed */
if (xto->page_offset >= page_offset &&
xto->op_offset == op_offset &&
xto->size == size &&
((write && xto->write_handler) || (!write && xto->read_handler))) {
return xto;
}
}
return NULL;
}
/*
* TIMA MMIO handlers
*/
void xive_tctx_tm_write(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset,
uint64_t value, unsigned size)
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
{
const XiveTmOp *xto;
trace_xive_tctx_tm_write(tctx->cs->cpu_index, offset, size, value);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/*
* TODO: check V bit in Q[0-3]W2
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
*/
/*
* First, check for special operations in the 2K region
*/
if (offset & TM_SPECIAL_OP) {
xto = xive_tm_find_op(tctx->xptr, offset, size, true);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
if (!xto) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid write access at TIMA "
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
"@%"HWADDR_PRIx"\n", offset);
} else {
xto->write_handler(xptr, tctx, offset, value, size);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
return;
}
/*
* Then, for special operations in the region below 2K.
*/
xto = xive_tm_find_op(tctx->xptr, offset, size, true);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
if (xto) {
xto->write_handler(xptr, tctx, offset, value, size);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
return;
}
/*
* Finish with raw access to the register values
*/
xive_tm_raw_write(tctx, offset, value, size);
}
uint64_t xive_tctx_tm_read(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset,
unsigned size)
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
{
const XiveTmOp *xto;
uint64_t ret;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
/*
* TODO: check V bit in Q[0-3]W2
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
*/
/*
* First, check for special operations in the 2K region
*/
if (offset & TM_SPECIAL_OP) {
xto = xive_tm_find_op(tctx->xptr, offset, size, false);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
if (!xto) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid read access to TIMA"
"@%"HWADDR_PRIx"\n", offset);
return -1;
}
ret = xto->read_handler(xptr, tctx, offset, size);
goto out;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
/*
* Then, for special operations in the region below 2K.
*/
xto = xive_tm_find_op(tctx->xptr, offset, size, false);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
if (xto) {
ret = xto->read_handler(xptr, tctx, offset, size);
goto out;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
/*
* Finish with raw access to the register values
*/
ret = xive_tm_raw_read(tctx, offset, size);
out:
trace_xive_tctx_tm_read(tctx->cs->cpu_index, offset, size, ret);
return ret;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
static char *xive_tctx_ring_print(uint8_t *ring)
{
uint32_t w2 = xive_tctx_word2(ring);
return g_strdup_printf("%02x %02x %02x %02x %02x "
"%02x %02x %02x %08x",
ring[TM_NSR], ring[TM_CPPR], ring[TM_IPB], ring[TM_LSMFB],
ring[TM_ACK_CNT], ring[TM_INC], ring[TM_AGE], ring[TM_PIPR],
be32_to_cpu(w2));
}
static const char * const xive_tctx_ring_names[] = {
"USER", "OS", "POOL", "PHYS",
};
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This ensures that QEMU won't try to use the device if KVM is disabled or if an in-kernel irqchip isn't required. When using ic-mode=dual with the pseries machine, we have two possible interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper will return true as soon as any of the KVM device is created. It might lure QEMU to think that the other one is also around, while it is not. This is exactly what happens with ic-mode=dual at machine init when claiming IRQ numbers, which must be done on all possible IRQ backends, eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device is active but we end up calling kvmppc_xive_source_reset_one() anyway, which fails. This doesn't cause any trouble because of another bug : kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't see the failure. Most of the other kvmppc_xive_* functions have similar xive->fd checks to filter out the case when KVM XIVE isn't active. It might look safer to have idempotent functions but it doesn't really help to understand what's going on when debugging. Since we already have all the kvm_irqchip_in_kernel() in place, also have the callers to check xive->fd as well before calling KVM XIVE specific code. This is straight-forward for the spapr specific XIVE code. Some more care is needed for the platform agnostic XIVE code since it cannot access xive->fd directly. Introduce new in_kernel() methods in some base XIVE classes for this purpose and implement them only in spapr. In all cases, we still need to call kvm_irqchip_in_kernel() so that compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM isn't defined, thus avoiding the need for stubs. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-07 14:32:14 +03:00
/*
* kvm_irqchip_in_kernel() will cause the compiler to turn this
* info a nop if CONFIG_KVM isn't defined.
*/
#define xive_in_kernel(xptr) \
(kvm_irqchip_in_kernel() && \
({ \
XivePresenterClass *xpc = XIVE_PRESENTER_GET_CLASS(xptr); \
xpc->in_kernel ? xpc->in_kernel(xptr) : false; \
}))
void xive_tctx_pic_print_info(XiveTCTX *tctx, GString *buf)
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
{
int cpu_index;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
int i;
/* Skip partially initialized vCPUs. This can happen on sPAPR when vCPUs
* are hot plugged or unplugged.
*/
if (!tctx) {
return;
}
cpu_index = tctx->cs ? tctx->cs->cpu_index : -1;
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This ensures that QEMU won't try to use the device if KVM is disabled or if an in-kernel irqchip isn't required. When using ic-mode=dual with the pseries machine, we have two possible interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper will return true as soon as any of the KVM device is created. It might lure QEMU to think that the other one is also around, while it is not. This is exactly what happens with ic-mode=dual at machine init when claiming IRQ numbers, which must be done on all possible IRQ backends, eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device is active but we end up calling kvmppc_xive_source_reset_one() anyway, which fails. This doesn't cause any trouble because of another bug : kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't see the failure. Most of the other kvmppc_xive_* functions have similar xive->fd checks to filter out the case when KVM XIVE isn't active. It might look safer to have idempotent functions but it doesn't really help to understand what's going on when debugging. Since we already have all the kvm_irqchip_in_kernel() in place, also have the callers to check xive->fd as well before calling KVM XIVE specific code. This is straight-forward for the spapr specific XIVE code. Some more care is needed for the platform agnostic XIVE code since it cannot access xive->fd directly. Introduce new in_kernel() methods in some base XIVE classes for this purpose and implement them only in spapr. In all cases, we still need to call kvm_irqchip_in_kernel() so that compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM isn't defined, thus avoiding the need for stubs. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-07 14:32:14 +03:00
if (xive_in_kernel(tctx->xptr)) {
Error *local_err = NULL;
kvmppc_xive_cpu_synchronize_state(tctx, &local_err);
if (local_err) {
error_report_err(local_err);
return;
}
}
g_string_append_printf(buf, "CPU[%04x]: "
"QW NSR CPPR IPB LSMFB ACK# INC AGE PIPR W2\n",
cpu_index);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
for (i = 0; i < XIVE_TM_RING_COUNT; i++) {
char *s = xive_tctx_ring_print(&tctx->regs[i * XIVE_TM_RING_SIZE]);
g_string_append_printf(buf, "CPU[%04x]: %4s %s\n",
cpu_index, xive_tctx_ring_names[i], s);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
g_free(s);
}
}
void xive_tctx_reset(XiveTCTX *tctx)
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
{
memset(tctx->regs, 0, sizeof(tctx->regs));
/* Set some defaults */
tctx->regs[TM_QW1_OS + TM_LSMFB] = 0xFF;
tctx->regs[TM_QW1_OS + TM_ACK_CNT] = 0xFF;
tctx->regs[TM_QW1_OS + TM_AGE] = 0xFF;
/*
* Initialize PIPR to 0xFF to avoid phantom interrupts when the
* CPPR is first set.
*/
tctx->regs[TM_QW1_OS + TM_PIPR] =
ipb_to_pipr(tctx->regs[TM_QW1_OS + TM_IPB]);
tctx->regs[TM_QW3_HV_PHYS + TM_PIPR] =
ipb_to_pipr(tctx->regs[TM_QW3_HV_PHYS + TM_IPB]);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
static void xive_tctx_realize(DeviceState *dev, Error **errp)
{
XiveTCTX *tctx = XIVE_TCTX(dev);
PowerPCCPU *cpu;
CPUPPCState *env;
assert(tctx->cs);
assert(tctx->xptr);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
cpu = POWERPC_CPU(tctx->cs);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
env = &cpu->env;
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_POWER9:
tctx->hv_output = qdev_get_gpio_in(DEVICE(cpu), POWER9_INPUT_HINT);
tctx->os_output = qdev_get_gpio_in(DEVICE(cpu), POWER9_INPUT_INT);
break;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
default:
error_setg(errp, "XIVE interrupt controller does not support "
"this CPU bus model");
return;
}
/* Connect the presenter to the VCPU (required for CPU hotplug) */
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This ensures that QEMU won't try to use the device if KVM is disabled or if an in-kernel irqchip isn't required. When using ic-mode=dual with the pseries machine, we have two possible interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper will return true as soon as any of the KVM device is created. It might lure QEMU to think that the other one is also around, while it is not. This is exactly what happens with ic-mode=dual at machine init when claiming IRQ numbers, which must be done on all possible IRQ backends, eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device is active but we end up calling kvmppc_xive_source_reset_one() anyway, which fails. This doesn't cause any trouble because of another bug : kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't see the failure. Most of the other kvmppc_xive_* functions have similar xive->fd checks to filter out the case when KVM XIVE isn't active. It might look safer to have idempotent functions but it doesn't really help to understand what's going on when debugging. Since we already have all the kvm_irqchip_in_kernel() in place, also have the callers to check xive->fd as well before calling KVM XIVE specific code. This is straight-forward for the spapr specific XIVE code. Some more care is needed for the platform agnostic XIVE code since it cannot access xive->fd directly. Introduce new in_kernel() methods in some base XIVE classes for this purpose and implement them only in spapr. In all cases, we still need to call kvm_irqchip_in_kernel() so that compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM isn't defined, thus avoiding the need for stubs. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-07 14:32:14 +03:00
if (xive_in_kernel(tctx->xptr)) {
if (kvmppc_xive_cpu_connect(tctx, errp) < 0) {
return;
}
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
static int vmstate_xive_tctx_pre_save(void *opaque)
{
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This ensures that QEMU won't try to use the device if KVM is disabled or if an in-kernel irqchip isn't required. When using ic-mode=dual with the pseries machine, we have two possible interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper will return true as soon as any of the KVM device is created. It might lure QEMU to think that the other one is also around, while it is not. This is exactly what happens with ic-mode=dual at machine init when claiming IRQ numbers, which must be done on all possible IRQ backends, eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device is active but we end up calling kvmppc_xive_source_reset_one() anyway, which fails. This doesn't cause any trouble because of another bug : kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't see the failure. Most of the other kvmppc_xive_* functions have similar xive->fd checks to filter out the case when KVM XIVE isn't active. It might look safer to have idempotent functions but it doesn't really help to understand what's going on when debugging. Since we already have all the kvm_irqchip_in_kernel() in place, also have the callers to check xive->fd as well before calling KVM XIVE specific code. This is straight-forward for the spapr specific XIVE code. Some more care is needed for the platform agnostic XIVE code since it cannot access xive->fd directly. Introduce new in_kernel() methods in some base XIVE classes for this purpose and implement them only in spapr. In all cases, we still need to call kvm_irqchip_in_kernel() so that compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM isn't defined, thus avoiding the need for stubs. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-07 14:32:14 +03:00
XiveTCTX *tctx = XIVE_TCTX(opaque);
Error *local_err = NULL;
int ret;
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This ensures that QEMU won't try to use the device if KVM is disabled or if an in-kernel irqchip isn't required. When using ic-mode=dual with the pseries machine, we have two possible interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper will return true as soon as any of the KVM device is created. It might lure QEMU to think that the other one is also around, while it is not. This is exactly what happens with ic-mode=dual at machine init when claiming IRQ numbers, which must be done on all possible IRQ backends, eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device is active but we end up calling kvmppc_xive_source_reset_one() anyway, which fails. This doesn't cause any trouble because of another bug : kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't see the failure. Most of the other kvmppc_xive_* functions have similar xive->fd checks to filter out the case when KVM XIVE isn't active. It might look safer to have idempotent functions but it doesn't really help to understand what's going on when debugging. Since we already have all the kvm_irqchip_in_kernel() in place, also have the callers to check xive->fd as well before calling KVM XIVE specific code. This is straight-forward for the spapr specific XIVE code. Some more care is needed for the platform agnostic XIVE code since it cannot access xive->fd directly. Introduce new in_kernel() methods in some base XIVE classes for this purpose and implement them only in spapr. In all cases, we still need to call kvm_irqchip_in_kernel() so that compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM isn't defined, thus avoiding the need for stubs. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-07 14:32:14 +03:00
if (xive_in_kernel(tctx->xptr)) {
ret = kvmppc_xive_cpu_get_state(tctx, &local_err);
if (ret < 0) {
error_report_err(local_err);
return ret;
}
}
return 0;
}
static int vmstate_xive_tctx_post_load(void *opaque, int version_id)
{
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This ensures that QEMU won't try to use the device if KVM is disabled or if an in-kernel irqchip isn't required. When using ic-mode=dual with the pseries machine, we have two possible interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper will return true as soon as any of the KVM device is created. It might lure QEMU to think that the other one is also around, while it is not. This is exactly what happens with ic-mode=dual at machine init when claiming IRQ numbers, which must be done on all possible IRQ backends, eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device is active but we end up calling kvmppc_xive_source_reset_one() anyway, which fails. This doesn't cause any trouble because of another bug : kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't see the failure. Most of the other kvmppc_xive_* functions have similar xive->fd checks to filter out the case when KVM XIVE isn't active. It might look safer to have idempotent functions but it doesn't really help to understand what's going on when debugging. Since we already have all the kvm_irqchip_in_kernel() in place, also have the callers to check xive->fd as well before calling KVM XIVE specific code. This is straight-forward for the spapr specific XIVE code. Some more care is needed for the platform agnostic XIVE code since it cannot access xive->fd directly. Introduce new in_kernel() methods in some base XIVE classes for this purpose and implement them only in spapr. In all cases, we still need to call kvm_irqchip_in_kernel() so that compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM isn't defined, thus avoiding the need for stubs. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-07 14:32:14 +03:00
XiveTCTX *tctx = XIVE_TCTX(opaque);
Error *local_err = NULL;
int ret;
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This ensures that QEMU won't try to use the device if KVM is disabled or if an in-kernel irqchip isn't required. When using ic-mode=dual with the pseries machine, we have two possible interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper will return true as soon as any of the KVM device is created. It might lure QEMU to think that the other one is also around, while it is not. This is exactly what happens with ic-mode=dual at machine init when claiming IRQ numbers, which must be done on all possible IRQ backends, eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device is active but we end up calling kvmppc_xive_source_reset_one() anyway, which fails. This doesn't cause any trouble because of another bug : kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't see the failure. Most of the other kvmppc_xive_* functions have similar xive->fd checks to filter out the case when KVM XIVE isn't active. It might look safer to have idempotent functions but it doesn't really help to understand what's going on when debugging. Since we already have all the kvm_irqchip_in_kernel() in place, also have the callers to check xive->fd as well before calling KVM XIVE specific code. This is straight-forward for the spapr specific XIVE code. Some more care is needed for the platform agnostic XIVE code since it cannot access xive->fd directly. Introduce new in_kernel() methods in some base XIVE classes for this purpose and implement them only in spapr. In all cases, we still need to call kvm_irqchip_in_kernel() so that compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM isn't defined, thus avoiding the need for stubs. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-07 14:32:14 +03:00
if (xive_in_kernel(tctx->xptr)) {
/*
* Required for hotplugged CPU, for which the state comes
* after all states of the machine.
*/
ret = kvmppc_xive_cpu_set_state(tctx, &local_err);
if (ret < 0) {
error_report_err(local_err);
return ret;
}
}
return 0;
}
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
static const VMStateDescription vmstate_xive_tctx = {
.name = TYPE_XIVE_TCTX,
.version_id = 1,
.minimum_version_id = 1,
.pre_save = vmstate_xive_tctx_pre_save,
.post_load = vmstate_xive_tctx_post_load,
.fields = (const VMStateField[]) {
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
VMSTATE_BUFFER(regs, XiveTCTX),
VMSTATE_END_OF_LIST()
},
};
static Property xive_tctx_properties[] = {
DEFINE_PROP_LINK("cpu", XiveTCTX, cs, TYPE_CPU, CPUState *),
DEFINE_PROP_LINK("presenter", XiveTCTX, xptr, TYPE_XIVE_PRESENTER,
XivePresenter *),
DEFINE_PROP_END_OF_LIST(),
};
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
static void xive_tctx_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->desc = "XIVE Interrupt Thread Context";
dc->realize = xive_tctx_realize;
dc->vmsd = &vmstate_xive_tctx;
device_class_set_props(dc, xive_tctx_properties);
/*
* Reason: part of XIVE interrupt controller, needs to be wired up
* by xive_tctx_create().
*/
dc->user_creatable = false;
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
}
static const TypeInfo xive_tctx_info = {
.name = TYPE_XIVE_TCTX,
.parent = TYPE_DEVICE,
.instance_size = sizeof(XiveTCTX),
.class_init = xive_tctx_class_init,
};
Object *xive_tctx_create(Object *cpu, XivePresenter *xptr, Error **errp)
{
Object *obj;
obj = object_new(TYPE_XIVE_TCTX);
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 18:29:22 +03:00
object_property_add_child(cpu, TYPE_XIVE_TCTX, obj);
object_unref(obj);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 19:05:54 +03:00
object_property_set_link(obj, "cpu", cpu, &error_abort);
object_property_set_link(obj, "presenter", OBJECT(xptr), &error_abort);
if (!qdev_realize(DEVICE(obj), NULL, errp)) {
object_unparent(obj);
return NULL;
}
return obj;
}
void xive_tctx_destroy(XiveTCTX *tctx)
{
Object *obj = OBJECT(tctx);
object_unparent(obj);
}
/*
* XIVE ESB helpers
*/
uint8_t xive_esb_set(uint8_t *pq, uint8_t value)
{
uint8_t old_pq = *pq & 0x3;
*pq &= ~0x3;
*pq |= value & 0x3;
return old_pq;
}
bool xive_esb_trigger(uint8_t *pq)
{
uint8_t old_pq = *pq & 0x3;
switch (old_pq) {
case XIVE_ESB_RESET:
xive_esb_set(pq, XIVE_ESB_PENDING);
return true;
case XIVE_ESB_PENDING:
case XIVE_ESB_QUEUED:
xive_esb_set(pq, XIVE_ESB_QUEUED);
return false;
case XIVE_ESB_OFF:
xive_esb_set(pq, XIVE_ESB_OFF);
return false;
default:
g_assert_not_reached();
}
}
bool xive_esb_eoi(uint8_t *pq)
{
uint8_t old_pq = *pq & 0x3;
switch (old_pq) {
case XIVE_ESB_RESET:
case XIVE_ESB_PENDING:
xive_esb_set(pq, XIVE_ESB_RESET);
return false;
case XIVE_ESB_QUEUED:
xive_esb_set(pq, XIVE_ESB_PENDING);
return true;
case XIVE_ESB_OFF:
xive_esb_set(pq, XIVE_ESB_OFF);
return false;
default:
g_assert_not_reached();
}
}
/*
* XIVE Interrupt Source (or IVSE)
*/
uint8_t xive_source_esb_get(XiveSource *xsrc, uint32_t srcno)
{
assert(srcno < xsrc->nr_irqs);
return xsrc->status[srcno] & 0x3;
}
uint8_t xive_source_esb_set(XiveSource *xsrc, uint32_t srcno, uint8_t pq)
{
assert(srcno < xsrc->nr_irqs);
return xive_esb_set(&xsrc->status[srcno], pq);
}
/*
* Returns whether the event notification should be forwarded.
*/
static bool xive_source_lsi_trigger(XiveSource *xsrc, uint32_t srcno)
{
uint8_t old_pq = xive_source_esb_get(xsrc, srcno);
xive_source_set_asserted(xsrc, srcno, true);
switch (old_pq) {
case XIVE_ESB_RESET:
xive_source_esb_set(xsrc, srcno, XIVE_ESB_PENDING);
return true;
default:
return false;
}
}
/*
* Sources can be configured with PQ offloading in which case the check
* on the PQ state bits of MSIs is disabled
*/
static bool xive_source_esb_disabled(XiveSource *xsrc, uint32_t srcno)
{
return (xsrc->esb_flags & XIVE_SRC_PQ_DISABLE) &&
!xive_source_irq_is_lsi(xsrc, srcno);
}
/*
* Returns whether the event notification should be forwarded.
*/
static bool xive_source_esb_trigger(XiveSource *xsrc, uint32_t srcno)
{
bool ret;
assert(srcno < xsrc->nr_irqs);
if (xive_source_esb_disabled(xsrc, srcno)) {
return true;
}
ret = xive_esb_trigger(&xsrc->status[srcno]);
if (xive_source_irq_is_lsi(xsrc, srcno) &&
xive_source_esb_get(xsrc, srcno) == XIVE_ESB_QUEUED) {
qemu_log_mask(LOG_GUEST_ERROR,
"XIVE: queued an event on LSI IRQ %d\n", srcno);
}
return ret;
}
/*
* Returns whether the event notification should be forwarded.
*/
static bool xive_source_esb_eoi(XiveSource *xsrc, uint32_t srcno)
{
bool ret;
assert(srcno < xsrc->nr_irqs);
if (xive_source_esb_disabled(xsrc, srcno)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid EOI for IRQ %d\n", srcno);
return false;
}
ret = xive_esb_eoi(&xsrc->status[srcno]);
/*
* LSI sources do not set the Q bit but they can still be
* asserted, in which case we should forward a new event
* notification
*/
if (xive_source_irq_is_lsi(xsrc, srcno) &&
xive_source_is_asserted(xsrc, srcno)) {
ret = xive_source_lsi_trigger(xsrc, srcno);
}
return ret;
}
/*
* Forward the source event notification to the Router
*/
static void xive_source_notify(XiveSource *xsrc, int srcno)
{
XiveNotifierClass *xnc = XIVE_NOTIFIER_GET_CLASS(xsrc->xive);
bool pq_checked = !xive_source_esb_disabled(xsrc, srcno);
if (xnc->notify) {
xnc->notify(xsrc->xive, srcno, pq_checked);
}
}
/*
* In a two pages ESB MMIO setting, even page is the trigger page, odd
* page is for management
*/
static inline bool addr_is_even(hwaddr addr, uint32_t shift)
{
return !((addr >> shift) & 1);
}
static inline bool xive_source_is_trigger_page(XiveSource *xsrc, hwaddr addr)
{
return xive_source_esb_has_2page(xsrc) &&
addr_is_even(addr, xsrc->esb_shift - 1);
}
/*
* ESB MMIO loads
* Trigger page Management/EOI page
*
* ESB MMIO setting 2 pages 1 or 2 pages
*
* 0x000 .. 0x3FF -1 EOI and return 0|1
* 0x400 .. 0x7FF -1 EOI and return 0|1
* 0x800 .. 0xBFF -1 return PQ
* 0xC00 .. 0xCFF -1 return PQ and atomically PQ=00
* 0xD00 .. 0xDFF -1 return PQ and atomically PQ=01
* 0xE00 .. 0xDFF -1 return PQ and atomically PQ=10
* 0xF00 .. 0xDFF -1 return PQ and atomically PQ=11
*/
static uint64_t xive_source_esb_read(void *opaque, hwaddr addr, unsigned size)
{
XiveSource *xsrc = XIVE_SOURCE(opaque);
uint32_t offset = addr & 0xFFF;
uint32_t srcno = addr >> xsrc->esb_shift;
uint64_t ret = -1;
/* In a two pages ESB MMIO setting, trigger page should not be read */
if (xive_source_is_trigger_page(xsrc, addr)) {
qemu_log_mask(LOG_GUEST_ERROR,
"XIVE: invalid load on IRQ %d trigger page at "
"0x%"HWADDR_PRIx"\n", srcno, addr);
return -1;
}
switch (offset) {
case XIVE_ESB_LOAD_EOI ... XIVE_ESB_LOAD_EOI + 0x7FF:
ret = xive_source_esb_eoi(xsrc, srcno);
/* Forward the source event notification for routing */
if (ret) {
xive_source_notify(xsrc, srcno);
}
break;
case XIVE_ESB_GET ... XIVE_ESB_GET + 0x3FF:
ret = xive_source_esb_get(xsrc, srcno);
break;
case XIVE_ESB_SET_PQ_00 ... XIVE_ESB_SET_PQ_00 + 0x0FF:
case XIVE_ESB_SET_PQ_01 ... XIVE_ESB_SET_PQ_01 + 0x0FF:
case XIVE_ESB_SET_PQ_10 ... XIVE_ESB_SET_PQ_10 + 0x0FF:
case XIVE_ESB_SET_PQ_11 ... XIVE_ESB_SET_PQ_11 + 0x0FF:
ret = xive_source_esb_set(xsrc, srcno, (offset >> 8) & 0x3);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB load addr %x\n",
offset);
}
trace_xive_source_esb_read(addr, srcno, ret);
return ret;
}
/*
* ESB MMIO stores
* Trigger page Management/EOI page
*
* ESB MMIO setting 2 pages 1 or 2 pages
*
* 0x000 .. 0x3FF Trigger Trigger
* 0x400 .. 0x7FF Trigger EOI
* 0x800 .. 0xBFF Trigger undefined
* 0xC00 .. 0xCFF Trigger PQ=00
* 0xD00 .. 0xDFF Trigger PQ=01
* 0xE00 .. 0xDFF Trigger PQ=10
* 0xF00 .. 0xDFF Trigger PQ=11
*/
static void xive_source_esb_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
XiveSource *xsrc = XIVE_SOURCE(opaque);
uint32_t offset = addr & 0xFFF;
uint32_t srcno = addr >> xsrc->esb_shift;
bool notify = false;
trace_xive_source_esb_write(addr, srcno, value);
/* In a two pages ESB MMIO setting, trigger page only triggers */
if (xive_source_is_trigger_page(xsrc, addr)) {
notify = xive_source_esb_trigger(xsrc, srcno);
goto out;
}
switch (offset) {
case 0 ... 0x3FF:
notify = xive_source_esb_trigger(xsrc, srcno);
break;
case XIVE_ESB_STORE_EOI ... XIVE_ESB_STORE_EOI + 0x3FF:
if (!(xsrc->esb_flags & XIVE_SRC_STORE_EOI)) {
qemu_log_mask(LOG_GUEST_ERROR,
"XIVE: invalid Store EOI for IRQ %d\n", srcno);
return;
}
notify = xive_source_esb_eoi(xsrc, srcno);
break;
/*
* This is an internal offset used to inject triggers when the PQ
* state bits are not controlled locally. Such as for LSIs when
* under ABT mode.
*/
case XIVE_ESB_INJECT ... XIVE_ESB_INJECT + 0x3FF:
notify = true;
break;
case XIVE_ESB_SET_PQ_00 ... XIVE_ESB_SET_PQ_00 + 0x0FF:
case XIVE_ESB_SET_PQ_01 ... XIVE_ESB_SET_PQ_01 + 0x0FF:
case XIVE_ESB_SET_PQ_10 ... XIVE_ESB_SET_PQ_10 + 0x0FF:
case XIVE_ESB_SET_PQ_11 ... XIVE_ESB_SET_PQ_11 + 0x0FF:
xive_source_esb_set(xsrc, srcno, (offset >> 8) & 0x3);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr %x\n",
offset);
return;
}
out:
/* Forward the source event notification for routing */
if (notify) {
xive_source_notify(xsrc, srcno);
}
}
static const MemoryRegionOps xive_source_esb_ops = {
.read = xive_source_esb_read,
.write = xive_source_esb_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 8,
},
.impl = {
.min_access_size = 1,
.max_access_size = 8,
},
};
void xive_source_set_irq(void *opaque, int srcno, int val)
{
XiveSource *xsrc = XIVE_SOURCE(opaque);
bool notify = false;
if (xive_source_irq_is_lsi(xsrc, srcno)) {
if (val) {
notify = xive_source_lsi_trigger(xsrc, srcno);
} else {
xive_source_set_asserted(xsrc, srcno, false);
}
} else {
if (val) {
notify = xive_source_esb_trigger(xsrc, srcno);
}
}
/* Forward the source event notification for routing */
if (notify) {
xive_source_notify(xsrc, srcno);
}
}
void xive_source_pic_print_info(XiveSource *xsrc, uint32_t offset, Monitor *mon)
{
int i;
for (i = 0; i < xsrc->nr_irqs; i++) {
uint8_t pq = xive_source_esb_get(xsrc, i);
if (pq == XIVE_ESB_OFF) {
continue;
}
monitor_printf(mon, " %08x %s %c%c%c\n", i + offset,
xive_source_irq_is_lsi(xsrc, i) ? "LSI" : "MSI",
pq & XIVE_ESB_VAL_P ? 'P' : '-',
pq & XIVE_ESB_VAL_Q ? 'Q' : '-',
xive_source_is_asserted(xsrc, i) ? 'A' : ' ');
}
}
static void xive_source_reset(void *dev)
{
XiveSource *xsrc = XIVE_SOURCE(dev);
/* Do not clear the LSI bitmap */
memset(xsrc->status, xsrc->reset_pq, xsrc->nr_irqs);
}
static void xive_source_realize(DeviceState *dev, Error **errp)
{
XiveSource *xsrc = XIVE_SOURCE(dev);
size_t esb_len = xive_source_esb_len(xsrc);
assert(xsrc->xive);
if (!xsrc->nr_irqs) {
error_setg(errp, "Number of interrupt needs to be greater than 0");
return;
}
if (xsrc->esb_shift != XIVE_ESB_4K &&
xsrc->esb_shift != XIVE_ESB_4K_2PAGE &&
xsrc->esb_shift != XIVE_ESB_64K &&
xsrc->esb_shift != XIVE_ESB_64K_2PAGE) {
error_setg(errp, "Invalid ESB shift setting");
return;
}
xsrc->status = g_malloc0(xsrc->nr_irqs);
xsrc->lsi_map = bitmap_new(xsrc->nr_irqs);
memory_region_init(&xsrc->esb_mmio, OBJECT(xsrc), "xive.esb", esb_len);
memory_region_init_io(&xsrc->esb_mmio_emulated, OBJECT(xsrc),
&xive_source_esb_ops, xsrc, "xive.esb-emulated",
esb_len);
memory_region_add_subregion(&xsrc->esb_mmio, 0, &xsrc->esb_mmio_emulated);
qemu_register_reset(xive_source_reset, dev);
}
static const VMStateDescription vmstate_xive_source = {
.name = TYPE_XIVE_SOURCE,
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]) {
VMSTATE_UINT32_EQUAL(nr_irqs, XiveSource, NULL),
VMSTATE_VBUFFER_UINT32(status, XiveSource, 1, NULL, nr_irqs),
VMSTATE_END_OF_LIST()
},
};
/*
* The default XIVE interrupt source setting for the ESB MMIOs is two
* 64k pages without Store EOI, to be in sync with KVM.
*/
static Property xive_source_properties[] = {
DEFINE_PROP_UINT64("flags", XiveSource, esb_flags, 0),
DEFINE_PROP_UINT32("nr-irqs", XiveSource, nr_irqs, 0),
DEFINE_PROP_UINT32("shift", XiveSource, esb_shift, XIVE_ESB_64K_2PAGE),
/*
* By default, PQs are initialized to 0b01 (Q=1) which corresponds
* to "ints off"
*/
DEFINE_PROP_UINT8("reset-pq", XiveSource, reset_pq, XIVE_ESB_OFF),
DEFINE_PROP_LINK("xive", XiveSource, xive, TYPE_XIVE_NOTIFIER,
XiveNotifier *),
DEFINE_PROP_END_OF_LIST(),
};
static void xive_source_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->desc = "XIVE Interrupt Source";
device_class_set_props(dc, xive_source_properties);
dc->realize = xive_source_realize;
dc->vmsd = &vmstate_xive_source;
/*
* Reason: part of XIVE interrupt controller, needs to be wired up,
* e.g. by spapr_xive_instance_init().
*/
dc->user_creatable = false;
}
static const TypeInfo xive_source_info = {
.name = TYPE_XIVE_SOURCE,
.parent = TYPE_DEVICE,
.instance_size = sizeof(XiveSource),
.class_init = xive_source_class_init,
};
/*
* XiveEND helpers
*/
void xive_end_queue_pic_print_info(XiveEND *end, uint32_t width, Monitor *mon)
{
uint64_t qaddr_base = xive_end_qaddr(end);
uint32_t qsize = xive_get_field32(END_W0_QSIZE, end->w0);
uint32_t qindex = xive_get_field32(END_W1_PAGE_OFF, end->w1);
uint32_t qentries = 1 << (qsize + 10);
int i;
/*
* print out the [ (qindex - (width - 1)) .. (qindex + 1)] window
*/
monitor_printf(mon, " [ ");
qindex = (qindex - (width - 1)) & (qentries - 1);
for (i = 0; i < width; i++) {
uint64_t qaddr = qaddr_base + (qindex << 2);
uint32_t qdata = -1;
if (dma_memory_read(&address_space_memory, qaddr,
&qdata, sizeof(qdata), MEMTXATTRS_UNSPECIFIED)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: failed to read EQ @0x%"
HWADDR_PRIx "\n", qaddr);
return;
}
monitor_printf(mon, "%s%08x ", i == width - 1 ? "^" : "",
be32_to_cpu(qdata));
qindex = (qindex + 1) & (qentries - 1);
}
monitor_printf(mon, "]");
}
void xive_end_pic_print_info(XiveEND *end, uint32_t end_idx, Monitor *mon)
{
uint64_t qaddr_base = xive_end_qaddr(end);
uint32_t qindex = xive_get_field32(END_W1_PAGE_OFF, end->w1);
uint32_t qgen = xive_get_field32(END_W1_GENERATION, end->w1);
uint32_t qsize = xive_get_field32(END_W0_QSIZE, end->w0);
uint32_t qentries = 1 << (qsize + 10);
uint32_t nvt_blk = xive_get_field32(END_W6_NVT_BLOCK, end->w6);
uint32_t nvt_idx = xive_get_field32(END_W6_NVT_INDEX, end->w6);
uint8_t priority = xive_get_field32(END_W7_F0_PRIORITY, end->w7);
uint8_t pq;
if (!xive_end_is_valid(end)) {
return;
}
pq = xive_get_field32(END_W1_ESn, end->w1);
monitor_printf(mon, " %08x %c%c %c%c%c%c%c%c%c%c prio:%d nvt:%02x/%04x",
end_idx,
pq & XIVE_ESB_VAL_P ? 'P' : '-',
pq & XIVE_ESB_VAL_Q ? 'Q' : '-',
xive_end_is_valid(end) ? 'v' : '-',
xive_end_is_enqueue(end) ? 'q' : '-',
xive_end_is_notify(end) ? 'n' : '-',
xive_end_is_backlog(end) ? 'b' : '-',
xive_end_is_escalate(end) ? 'e' : '-',
xive_end_is_uncond_escalation(end) ? 'u' : '-',
xive_end_is_silent_escalation(end) ? 's' : '-',
xive_end_is_firmware(end) ? 'f' : '-',
priority, nvt_blk, nvt_idx);
if (qaddr_base) {
monitor_printf(mon, " eq:@%08"PRIx64"% 6d/%5d ^%d",
qaddr_base, qindex, qentries, qgen);
xive_end_queue_pic_print_info(end, 6, mon);
}
monitor_printf(mon, "\n");
}
static void xive_end_enqueue(XiveEND *end, uint32_t data)
{
uint64_t qaddr_base = xive_end_qaddr(end);
uint32_t qsize = xive_get_field32(END_W0_QSIZE, end->w0);
uint32_t qindex = xive_get_field32(END_W1_PAGE_OFF, end->w1);
uint32_t qgen = xive_get_field32(END_W1_GENERATION, end->w1);
uint64_t qaddr = qaddr_base + (qindex << 2);
uint32_t qdata = cpu_to_be32((qgen << 31) | (data & 0x7fffffff));
uint32_t qentries = 1 << (qsize + 10);
if (dma_memory_write(&address_space_memory, qaddr,
&qdata, sizeof(qdata), MEMTXATTRS_UNSPECIFIED)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: failed to write END data @0x%"
HWADDR_PRIx "\n", qaddr);
return;
}
qindex = (qindex + 1) & (qentries - 1);
if (qindex == 0) {
qgen ^= 1;
end->w1 = xive_set_field32(END_W1_GENERATION, end->w1, qgen);
}
end->w1 = xive_set_field32(END_W1_PAGE_OFF, end->w1, qindex);
}
void xive_end_eas_pic_print_info(XiveEND *end, uint32_t end_idx,
Monitor *mon)
{
XiveEAS *eas = (XiveEAS *) &end->w4;
uint8_t pq;
if (!xive_end_is_escalate(end)) {
return;
}
pq = xive_get_field32(END_W1_ESe, end->w1);
monitor_printf(mon, " %08x %c%c %c%c end:%02x/%04x data:%08x\n",
end_idx,
pq & XIVE_ESB_VAL_P ? 'P' : '-',
pq & XIVE_ESB_VAL_Q ? 'Q' : '-',
xive_eas_is_valid(eas) ? 'V' : ' ',
xive_eas_is_masked(eas) ? 'M' : ' ',
(uint8_t) xive_get_field64(EAS_END_BLOCK, eas->w),
(uint32_t) xive_get_field64(EAS_END_INDEX, eas->w),
(uint32_t) xive_get_field64(EAS_END_DATA, eas->w));
}
/*
* XIVE Router (aka. Virtualization Controller or IVRE)
*/
int xive_router_get_eas(XiveRouter *xrtr, uint8_t eas_blk, uint32_t eas_idx,
XiveEAS *eas)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->get_eas(xrtr, eas_blk, eas_idx, eas);
}
static
int xive_router_get_pq(XiveRouter *xrtr, uint8_t eas_blk, uint32_t eas_idx,
uint8_t *pq)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->get_pq(xrtr, eas_blk, eas_idx, pq);
}
static
int xive_router_set_pq(XiveRouter *xrtr, uint8_t eas_blk, uint32_t eas_idx,
uint8_t *pq)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->set_pq(xrtr, eas_blk, eas_idx, pq);
}
int xive_router_get_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
XiveEND *end)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->get_end(xrtr, end_blk, end_idx, end);
}
int xive_router_write_end(XiveRouter *xrtr, uint8_t end_blk, uint32_t end_idx,
XiveEND *end, uint8_t word_number)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->write_end(xrtr, end_blk, end_idx, end, word_number);
}
int xive_router_get_nvt(XiveRouter *xrtr, uint8_t nvt_blk, uint32_t nvt_idx,
XiveNVT *nvt)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->get_nvt(xrtr, nvt_blk, nvt_idx, nvt);
}
int xive_router_write_nvt(XiveRouter *xrtr, uint8_t nvt_blk, uint32_t nvt_idx,
XiveNVT *nvt, uint8_t word_number)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->write_nvt(xrtr, nvt_blk, nvt_idx, nvt, word_number);
}
static int xive_router_get_block_id(XiveRouter *xrtr)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->get_block_id(xrtr);
}
static void xive_router_realize(DeviceState *dev, Error **errp)
{
XiveRouter *xrtr = XIVE_ROUTER(dev);
assert(xrtr->xfb);
}
static void xive_router_end_notify_handler(XiveRouter *xrtr, XiveEAS *eas)
{
XiveRouterClass *xrc = XIVE_ROUTER_GET_CLASS(xrtr);
return xrc->end_notify(xrtr, eas);
}
/*
* Encode the HW CAM line in the block group mode format :
*
* chip << 19 | 0000000 0 0001 thread (7Bit)
*/
static uint32_t xive_tctx_hw_cam_line(XivePresenter *xptr, XiveTCTX *tctx)
{
CPUPPCState *env = &POWERPC_CPU(tctx->cs)->env;
uint32_t pir = env->spr_cb[SPR_PIR].default_value;
uint8_t blk = xive_router_get_block_id(XIVE_ROUTER(xptr));
return xive_nvt_cam_line(blk, 1 << 7 | (pir & 0x7f));
}
/*
* The thread context register words are in big-endian format.
*/
int xive_presenter_tctx_match(XivePresenter *xptr, XiveTCTX *tctx,
uint8_t format,
uint8_t nvt_blk, uint32_t nvt_idx,
bool cam_ignore, uint32_t logic_serv)
{
uint32_t cam = xive_nvt_cam_line(nvt_blk, nvt_idx);
uint32_t qw3w2 = xive_tctx_word2(&tctx->regs[TM_QW3_HV_PHYS]);
uint32_t qw2w2 = xive_tctx_word2(&tctx->regs[TM_QW2_HV_POOL]);
uint32_t qw1w2 = xive_tctx_word2(&tctx->regs[TM_QW1_OS]);
uint32_t qw0w2 = xive_tctx_word2(&tctx->regs[TM_QW0_USER]);
/*
* TODO (PowerNV): ignore mode. The low order bits of the NVT
* identifier are ignored in the "CAM" match.
*/
if (format == 0) {
if (cam_ignore == true) {
/*
* F=0 & i=1: Logical server notification (bits ignored at
* the end of the NVT identifier)
*/
qemu_log_mask(LOG_UNIMP, "XIVE: no support for LS NVT %x/%x\n",
nvt_blk, nvt_idx);
return -1;
}
/* F=0 & i=0: Specific NVT notification */
/* PHYS ring */
if ((be32_to_cpu(qw3w2) & TM_QW3W2_VT) &&
cam == xive_tctx_hw_cam_line(xptr, tctx)) {
return TM_QW3_HV_PHYS;
}
/* HV POOL ring */
if ((be32_to_cpu(qw2w2) & TM_QW2W2_VP) &&
cam == xive_get_field32(TM_QW2W2_POOL_CAM, qw2w2)) {
return TM_QW2_HV_POOL;
}
/* OS ring */
if ((be32_to_cpu(qw1w2) & TM_QW1W2_VO) &&
cam == xive_get_field32(TM_QW1W2_OS_CAM, qw1w2)) {
return TM_QW1_OS;
}
} else {
/* F=1 : User level Event-Based Branch (EBB) notification */
/* USER ring */
if ((be32_to_cpu(qw1w2) & TM_QW1W2_VO) &&
(cam == xive_get_field32(TM_QW1W2_OS_CAM, qw1w2)) &&
(be32_to_cpu(qw0w2) & TM_QW0W2_VU) &&
(logic_serv == xive_get_field32(TM_QW0W2_LOGIC_SERV, qw0w2))) {
return TM_QW0_USER;
}
}
return -1;
}
/*
* This is our simple Xive Presenter Engine model. It is merged in the
* Router as it does not require an extra object.
*
* It receives notification requests sent by the IVRE to find one
* matching NVT (or more) dispatched on the processor threads. In case
* of a single NVT notification, the process is abbreviated and the
* thread is signaled if a match is found. In case of a logical server
* notification (bits ignored at the end of the NVT identifier), the
* IVPE and IVRE select a winning thread using different filters. This
* involves 2 or 3 exchanges on the PowerBus that the model does not
* support.
*
* The parameters represent what is sent on the PowerBus
*/
bool xive_presenter_notify(XiveFabric *xfb, uint8_t format,
uint8_t nvt_blk, uint32_t nvt_idx,
bool cam_ignore, uint8_t priority,
uint32_t logic_serv)
{
XiveFabricClass *xfc = XIVE_FABRIC_GET_CLASS(xfb);
XiveTCTXMatch match = { .tctx = NULL, .ring = 0 };
int count;
/*
* Ask the machine to scan the interrupt controllers for a match
*/
count = xfc->match_nvt(xfb, format, nvt_blk, nvt_idx, cam_ignore,
priority, logic_serv, &match);
if (count < 0) {
return false;
}
/* handle CPU exception delivery */
if (count) {
trace_xive_presenter_notify(nvt_blk, nvt_idx, match.ring);
xive_tctx_ipb_update(match.tctx, match.ring,
xive_priority_to_ipb(priority));
}
return !!count;
}
/*
* Notification using the END ESe/ESn bit (Event State Buffer for
* escalation and notification). Provide further coalescing in the
* Router.
*/
static bool xive_router_end_es_notify(XiveRouter *xrtr, uint8_t end_blk,
uint32_t end_idx, XiveEND *end,
uint32_t end_esmask)
{
uint8_t pq = xive_get_field32(end_esmask, end->w1);
bool notify = xive_esb_trigger(&pq);
if (pq != xive_get_field32(end_esmask, end->w1)) {
end->w1 = xive_set_field32(end_esmask, end->w1, pq);
xive_router_write_end(xrtr, end_blk, end_idx, end, 1);
}
/* ESe/n[Q]=1 : end of notification */
return notify;
}
/*
* An END trigger can come from an event trigger (IPI or HW) or from
* another chip. We don't model the PowerBus but the END trigger
* message has the same parameters than in the function below.
*/
void xive_router_end_notify(XiveRouter *xrtr, XiveEAS *eas)
{
XiveEND end;
uint8_t priority;
uint8_t format;
uint8_t nvt_blk;
uint32_t nvt_idx;
XiveNVT nvt;
bool found;
uint8_t end_blk = xive_get_field64(EAS_END_BLOCK, eas->w);
uint32_t end_idx = xive_get_field64(EAS_END_INDEX, eas->w);
uint32_t end_data = xive_get_field64(EAS_END_DATA, eas->w);
/* END cache lookup */
if (xive_router_get_end(xrtr, end_blk, end_idx, &end)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: No END %x/%x\n", end_blk,
end_idx);
return;
}
if (!xive_end_is_valid(&end)) {
trace_xive_router_end_notify(end_blk, end_idx, end_data);
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: END %x/%x is invalid\n",
end_blk, end_idx);
return;
}
if (xive_end_is_enqueue(&end)) {
xive_end_enqueue(&end, end_data);
/* Enqueuing event data modifies the EQ toggle and index */
xive_router_write_end(xrtr, end_blk, end_idx, &end, 1);
}
/*
* When the END is silent, we skip the notification part.
*/
if (xive_end_is_silent_escalation(&end)) {
goto do_escalation;
}
/*
* The W7 format depends on the F bit in W6. It defines the type
* of the notification :
*
* F=0 : single or multiple NVT notification
* F=1 : User level Event-Based Branch (EBB) notification, no
* priority
*/
format = xive_get_field32(END_W6_FORMAT_BIT, end.w6);
priority = xive_get_field32(END_W7_F0_PRIORITY, end.w7);
/* The END is masked */
if (format == 0 && priority == 0xff) {
return;
}
/*
* Check the END ESn (Event State Buffer for notification) for
* even further coalescing in the Router
*/
if (!xive_end_is_notify(&end)) {
/* ESn[Q]=1 : end of notification */
if (!xive_router_end_es_notify(xrtr, end_blk, end_idx,
&end, END_W1_ESn)) {
return;
}
}
/*
* Follows IVPE notification
*/
nvt_blk = xive_get_field32(END_W6_NVT_BLOCK, end.w6);
nvt_idx = xive_get_field32(END_W6_NVT_INDEX, end.w6);
/* NVT cache lookup */
if (xive_router_get_nvt(xrtr, nvt_blk, nvt_idx, &nvt)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: no NVT %x/%x\n",
nvt_blk, nvt_idx);
return;
}
if (!xive_nvt_is_valid(&nvt)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: NVT %x/%x is invalid\n",
nvt_blk, nvt_idx);
return;
}
found = xive_presenter_notify(xrtr->xfb, format, nvt_blk, nvt_idx,
xive_get_field32(END_W7_F0_IGNORE, end.w7),
priority,
xive_get_field32(END_W7_F1_LOG_SERVER_ID, end.w7));
/* TODO: Auto EOI. */
if (found) {
return;
}
/*
* If no matching NVT is dispatched on a HW thread :
* - specific VP: update the NVT structure if backlog is activated
* - logical server : forward request to IVPE (not supported)
*/
if (xive_end_is_backlog(&end)) {
uint8_t ipb;
if (format == 1) {
qemu_log_mask(LOG_GUEST_ERROR,
"XIVE: END %x/%x invalid config: F1 & backlog\n",
end_blk, end_idx);
return;
}
/*
* Record the IPB in the associated NVT structure for later
* use. The presenter will resend the interrupt when the vCPU
* is dispatched again on a HW thread.
*/
ipb = xive_get_field32(NVT_W4_IPB, nvt.w4) |
xive_priority_to_ipb(priority);
nvt.w4 = xive_set_field32(NVT_W4_IPB, nvt.w4, ipb);
xive_router_write_nvt(xrtr, nvt_blk, nvt_idx, &nvt, 4);
/*
* On HW, follows a "Broadcast Backlog" to IVPEs
*/
}
do_escalation:
/*
* If activated, escalate notification using the ESe PQ bits and
* the EAS in w4-5
*/
if (!xive_end_is_escalate(&end)) {
return;
}
/*
* Check the END ESe (Event State Buffer for escalation) for even
* further coalescing in the Router
*/
if (!xive_end_is_uncond_escalation(&end)) {
/* ESe[Q]=1 : end of notification */
if (!xive_router_end_es_notify(xrtr, end_blk, end_idx,
&end, END_W1_ESe)) {
return;
}
}
trace_xive_router_end_escalate(end_blk, end_idx,
(uint8_t) xive_get_field32(END_W4_ESC_END_BLOCK, end.w4),
(uint32_t) xive_get_field32(END_W4_ESC_END_INDEX, end.w4),
(uint32_t) xive_get_field32(END_W5_ESC_END_DATA, end.w5));
/*
* The END trigger becomes an Escalation trigger
*/
xive_router_end_notify_handler(xrtr, (XiveEAS *) &end.w4);
}
void xive_router_notify(XiveNotifier *xn, uint32_t lisn, bool pq_checked)
{
XiveRouter *xrtr = XIVE_ROUTER(xn);
ppc/pnv: Improve trigger data definition The trigger data is used for both triggers of a HW source interrupts, PHB, PSI, and triggers for rerouting interrupts between interrupt controllers. When an interrupt is rerouted, the trigger data follows an "END trigger" format. In that case, the remote IC needs EAS containing an END index to perform a lookup of an END. An END trigger, bit0 of word0 set to '1', is defined as : |0123|4567|0123|4567|0123|4567|0123|4567| W0 E=1 |1P--|BLOC| END IDX | W1 E=1 |M | END DATA | An EAS is defined as : |0123|4567|0123|4567|0123|4567|0123|4567| W0 |V---|BLOC| END IDX | W1 |M | END DATA | The END trigger adds an extra 'PQ' bit, bit1 of word0 set to '1', signaling that the PQ bits have been checked. That bit is unused in the initial EAS definition. When a HW device performs the trigger, the trigger data follows an "EAS trigger" format because the trigger data in that case contains an EAS index which the IC needs to look for. An EAS trigger, bit0 of word0 set to '0', is defined as : |0123|4567|0123|4567|0123|4567|0123|4567| W0 E=0 |0P--|---- ---- ---- ---- ---- ---- ----| W1 E=0 |BLOC| EAS INDEX | There is also a 'PQ' bit, bit1 of word0 to '1', signaling that the PQ bits have been checked. Introduce these new trigger bits and rename the XIVE_SRCNO macros in XIVE_EAS to reflect better the nature of the data. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191007084102.29776-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-07 11:40:54 +03:00
uint8_t eas_blk = XIVE_EAS_BLOCK(lisn);
uint32_t eas_idx = XIVE_EAS_INDEX(lisn);
XiveEAS eas;
/* EAS cache lookup */
if (xive_router_get_eas(xrtr, eas_blk, eas_idx, &eas)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: Unknown LISN %x\n", lisn);
return;
}
if (!pq_checked) {
bool notify;
uint8_t pq;
/* PQ cache lookup */
if (xive_router_get_pq(xrtr, eas_blk, eas_idx, &pq)) {
/* Set FIR */
g_assert_not_reached();
}
notify = xive_esb_trigger(&pq);
if (xive_router_set_pq(xrtr, eas_blk, eas_idx, &pq)) {
/* Set FIR */
g_assert_not_reached();
}
if (!notify) {
return;
}
}
if (!xive_eas_is_valid(&eas)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %x\n", lisn);
return;
}
if (xive_eas_is_masked(&eas)) {
/* Notification completed */
return;
}
/*
* The event trigger becomes an END trigger
*/
xive_router_end_notify_handler(xrtr, &eas);
}
static Property xive_router_properties[] = {
DEFINE_PROP_LINK("xive-fabric", XiveRouter, xfb,
TYPE_XIVE_FABRIC, XiveFabric *),
DEFINE_PROP_END_OF_LIST(),
};
static void xive_router_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
XiveNotifierClass *xnc = XIVE_NOTIFIER_CLASS(klass);
XiveRouterClass *xrc = XIVE_ROUTER_CLASS(klass);
dc->desc = "XIVE Router Engine";
device_class_set_props(dc, xive_router_properties);
/* Parent is SysBusDeviceClass. No need to call its realize hook */
dc->realize = xive_router_realize;
xnc->notify = xive_router_notify;
/* By default, the router handles END triggers locally */
xrc->end_notify = xive_router_end_notify;
}
static const TypeInfo xive_router_info = {
.name = TYPE_XIVE_ROUTER,
.parent = TYPE_SYS_BUS_DEVICE,
.abstract = true,
.instance_size = sizeof(XiveRouter),
.class_size = sizeof(XiveRouterClass),
.class_init = xive_router_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_XIVE_NOTIFIER },
{ TYPE_XIVE_PRESENTER },
{ }
}
};
void xive_eas_pic_print_info(XiveEAS *eas, uint32_t lisn, Monitor *mon)
{
if (!xive_eas_is_valid(eas)) {
return;
}
monitor_printf(mon, " %08x %s end:%02x/%04x data:%08x\n",
lisn, xive_eas_is_masked(eas) ? "M" : " ",
(uint8_t) xive_get_field64(EAS_END_BLOCK, eas->w),
(uint32_t) xive_get_field64(EAS_END_INDEX, eas->w),
(uint32_t) xive_get_field64(EAS_END_DATA, eas->w));
}
/*
* END ESB MMIO loads
*/
static uint64_t xive_end_source_read(void *opaque, hwaddr addr, unsigned size)
{
XiveENDSource *xsrc = XIVE_END_SOURCE(opaque);
uint32_t offset = addr & 0xFFF;
uint8_t end_blk;
uint32_t end_idx;
XiveEND end;
uint32_t end_esmask;
uint8_t pq;
uint64_t ret = -1;
/*
* The block id should be deduced from the load address on the END
* ESB MMIO but our model only supports a single block per XIVE chip.
*/
end_blk = xive_router_get_block_id(xsrc->xrtr);
end_idx = addr >> (xsrc->esb_shift + 1);
trace_xive_end_source_read(end_blk, end_idx, addr);
if (xive_router_get_end(xsrc->xrtr, end_blk, end_idx, &end)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: No END %x/%x\n", end_blk,
end_idx);
return -1;
}
if (!xive_end_is_valid(&end)) {
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: END %x/%x is invalid\n",
end_blk, end_idx);
return -1;
}
end_esmask = addr_is_even(addr, xsrc->esb_shift) ? END_W1_ESn : END_W1_ESe;
pq = xive_get_field32(end_esmask, end.w1);
switch (offset) {
case XIVE_ESB_LOAD_EOI ... XIVE_ESB_LOAD_EOI + 0x7FF:
ret = xive_esb_eoi(&pq);
/* Forward the source event notification for routing ?? */
break;
case XIVE_ESB_GET ... XIVE_ESB_GET + 0x3FF:
ret = pq;
break;
case XIVE_ESB_SET_PQ_00 ... XIVE_ESB_SET_PQ_00 + 0x0FF:
case XIVE_ESB_SET_PQ_01 ... XIVE_ESB_SET_PQ_01 + 0x0FF:
case XIVE_ESB_SET_PQ_10 ... XIVE_ESB_SET_PQ_10 + 0x0FF:
case XIVE_ESB_SET_PQ_11 ... XIVE_ESB_SET_PQ_11 + 0x0FF:
ret = xive_esb_set(&pq, (offset >> 8) & 0x3);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid END ESB load addr %d\n",
offset);
return -1;
}
if (pq != xive_get_field32(end_esmask, end.w1)) {
end.w1 = xive_set_field32(end_esmask, end.w1, pq);
xive_router_write_end(xsrc->xrtr, end_blk, end_idx, &end, 1);
}
return ret;
}
/*
* END ESB MMIO stores are invalid
*/
static void xive_end_source_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr 0x%"
HWADDR_PRIx"\n", addr);
}
static const MemoryRegionOps xive_end_source_ops = {
.read = xive_end_source_read,
.write = xive_end_source_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 8,
},
.impl = {
.min_access_size = 1,
.max_access_size = 8,
},
};
static void xive_end_source_realize(DeviceState *dev, Error **errp)
{
XiveENDSource *xsrc = XIVE_END_SOURCE(dev);
assert(xsrc->xrtr);
if (!xsrc->nr_ends) {
error_setg(errp, "Number of interrupt needs to be greater than 0");
return;
}
if (xsrc->esb_shift != XIVE_ESB_4K &&
xsrc->esb_shift != XIVE_ESB_64K) {
error_setg(errp, "Invalid ESB shift setting");
return;
}
/*
* Each END is assigned an even/odd pair of MMIO pages, the even page
* manages the ESn field while the odd page manages the ESe field.
*/
memory_region_init_io(&xsrc->esb_mmio, OBJECT(xsrc),
&xive_end_source_ops, xsrc, "xive.end",
(1ull << (xsrc->esb_shift + 1)) * xsrc->nr_ends);
}
static Property xive_end_source_properties[] = {
DEFINE_PROP_UINT32("nr-ends", XiveENDSource, nr_ends, 0),
DEFINE_PROP_UINT32("shift", XiveENDSource, esb_shift, XIVE_ESB_64K),
DEFINE_PROP_LINK("xive", XiveENDSource, xrtr, TYPE_XIVE_ROUTER,
XiveRouter *),
DEFINE_PROP_END_OF_LIST(),
};
static void xive_end_source_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->desc = "XIVE END Source";
device_class_set_props(dc, xive_end_source_properties);
dc->realize = xive_end_source_realize;
/*
* Reason: part of XIVE interrupt controller, needs to be wired up,
* e.g. by spapr_xive_instance_init().
*/
dc->user_creatable = false;
}
static const TypeInfo xive_end_source_info = {
.name = TYPE_XIVE_END_SOURCE,
.parent = TYPE_DEVICE,
.instance_size = sizeof(XiveENDSource),
.class_init = xive_end_source_class_init,
};
/*
* XIVE Notifier
*/
static const TypeInfo xive_notifier_info = {
.name = TYPE_XIVE_NOTIFIER,
.parent = TYPE_INTERFACE,
.class_size = sizeof(XiveNotifierClass),
};
/*
* XIVE Presenter
*/
static const TypeInfo xive_presenter_info = {
.name = TYPE_XIVE_PRESENTER,
.parent = TYPE_INTERFACE,
.class_size = sizeof(XivePresenterClass),
};
/*
* XIVE Fabric
*/
static const TypeInfo xive_fabric_info = {
.name = TYPE_XIVE_FABRIC,
.parent = TYPE_INTERFACE,
.class_size = sizeof(XiveFabricClass),
};
static void xive_register_types(void)
{
type_register_static(&xive_fabric_info);
type_register_static(&xive_source_info);
type_register_static(&xive_notifier_info);
type_register_static(&xive_presenter_info);
type_register_static(&xive_router_info);
type_register_static(&xive_end_source_info);
ppc/xive: introduce the XIVE interrupt thread context Each POWER9 processor chip has a XIVE presenter that can generate four different exceptions to its threads: - hypervisor exception, - O/S exception - Event-Based Branch (EBB) - msgsnd (doorbell). Each exception has a state independent from the others called a Thread Interrupt Management context. This context is a set of registers which lets the thread handle priority management and interrupt acknowledgment among other things. The most important ones being : - Interrupt Priority Register (PIPR) - Interrupt Pending Buffer (IPB) - Current Processor Priority (CPPR) - Notification Source Register (NSR) These registers are accessible through a specific MMIO region, called the Thread Interrupt Management Area (TIMA), four aligned pages, each exposing a different view of the registers. First page (page address ending in 0b00) gives access to the entire context and is reserved for the ring 0 view for the physical thread context. The second (page address ending in 0b01) is for the hypervisor, ring 1 view. The third (page address ending in 0b10) is for the operating system, ring 2 view. The fourth (page address ending in 0b11) is for user level, ring 3 view. The thread interrupt context is modeled with a XiveTCTX object containing the values of the different exception registers. The TIMA region is mapped at the same address for each CPU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-09 22:45:53 +03:00
type_register_static(&xive_tctx_info);
}
type_init(xive_register_types)