qemu/hmp.c

3126 lines
97 KiB
C
Raw Normal View History

/*
* Human Monitor Interface
*
* Copyright IBM, Corp. 2011
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "hmp.h"
#include "net/net.h"
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
#include "net/eth.h"
#include "chardev/char.h"
#include "sysemu/block-backend.h"
#include "sysemu/sysemu.h"
#include "qemu/config-file.h"
#include "qemu/option.h"
#include "qemu/timer.h"
#include "qemu/sockets.h"
#include "monitor/monitor.h"
#include "monitor/qdev.h"
#include "qapi/error.h"
#include "qapi/opts-visitor.h"
#include "qapi/qapi-builtin-visit.h"
#include "qapi/qapi-commands-block.h"
#include "qapi/qapi-commands-char.h"
#include "qapi/qapi-commands-migration.h"
#include "qapi/qapi-commands-misc.h"
#include "qapi/qapi-commands-net.h"
#include "qapi/qapi-commands-rocker.h"
#include "qapi/qapi-commands-run-state.h"
#include "qapi/qapi-commands-tpm.h"
#include "qapi/qapi-commands-ui.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qapi/string-input-visitor.h"
#include "qapi/string-output-visitor.h"
#include "qom/object_interfaces.h"
#include "ui/console.h"
#include "block/nbd.h"
#include "block/qapi.h"
#include "qemu-io.h"
#include "qemu/cutils.h"
migration: add reporting of errors for outgoing migration Currently if an application initiates an outgoing migration, it may or may not, get an error reported back on failure. If the error occurs synchronously to the 'migrate' command execution, the client app will see the error message. This is the case for DNS lookup failures. If the error occurs asynchronously to the monitor command though, the error will be thrown away and the client left guessing about what went wrong. This is the case for failure to connect to the TCP server (eg due to wrong port, or firewall rules, or other similar errors). In the future we'll be adding more scope for errors to happen asynchronously with the TLS protocol handshake. TLS errors are hard to diagnose even when they are well reported, so discarding errors entirely will make it impossible to debug TLS connection problems. Management apps which do migration are already using 'query-migrate' / 'info migrate' to check up on progress of background migration operations and to see their end status. This is a fine place to also include the error message when things go wrong. This patch thus adds an 'error-desc' field to the MigrationInfo struct, which will be populated when the 'status' is set to 'failed': (qemu) migrate -d tcp:localhost:9001 (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed (Error connecting to socket: Connection refused) total time: 0 milliseconds In the HMP, when doing non-detached migration, it is also possible to display this error message directly to the app. (qemu) migrate tcp:localhost:9001 Error connecting to socket: Connection refused Or with QMP { "execute": "query-migrate", "arguments": {} } { "return": { "status": "failed", "error-desc": "address resolution failed for myhost:9000: No address associated with hostname" } } Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-04-27 13:05:00 +03:00
#include "qemu/error-report.h"
#include "exec/ramlist.h"
#include "hw/intc/intc.h"
#include "migration/snapshot.h"
#include "migration/misc.h"
#ifdef CONFIG_SPICE
#include <spice/enums.h>
#endif
static void hmp_handle_error(Monitor *mon, Error **errp)
{
assert(errp);
if (*errp) {
error_reportf_err(*errp, "Error: ");
}
}
void hmp_info_name(Monitor *mon, const QDict *qdict)
{
NameInfo *info;
info = qmp_query_name(NULL);
if (info->has_name) {
monitor_printf(mon, "%s\n", info->name);
}
qapi_free_NameInfo(info);
}
void hmp_info_version(Monitor *mon, const QDict *qdict)
{
VersionInfo *info;
info = qmp_query_version(NULL);
monitor_printf(mon, "%" PRId64 ".%" PRId64 ".%" PRId64 "%s\n",
info->qemu->major, info->qemu->minor, info->qemu->micro,
info->package);
qapi_free_VersionInfo(info);
}
void hmp_info_kvm(Monitor *mon, const QDict *qdict)
{
KvmInfo *info;
info = qmp_query_kvm(NULL);
monitor_printf(mon, "kvm support: ");
if (info->present) {
monitor_printf(mon, "%s\n", info->enabled ? "enabled" : "disabled");
} else {
monitor_printf(mon, "not compiled\n");
}
qapi_free_KvmInfo(info);
}
void hmp_info_status(Monitor *mon, const QDict *qdict)
{
StatusInfo *info;
info = qmp_query_status(NULL);
monitor_printf(mon, "VM status: %s%s",
info->running ? "running" : "paused",
info->singlestep ? " (single step mode)" : "");
if (!info->running && info->status != RUN_STATE_PAUSED) {
monitor_printf(mon, " (%s)", RunState_str(info->status));
}
monitor_printf(mon, "\n");
qapi_free_StatusInfo(info);
}
void hmp_info_uuid(Monitor *mon, const QDict *qdict)
{
UuidInfo *info;
info = qmp_query_uuid(NULL);
monitor_printf(mon, "%s\n", info->UUID);
qapi_free_UuidInfo(info);
}
void hmp_info_chardev(Monitor *mon, const QDict *qdict)
{
ChardevInfoList *char_info, *info;
char_info = qmp_query_chardev(NULL);
for (info = char_info; info; info = info->next) {
monitor_printf(mon, "%s: filename=%s\n", info->value->label,
info->value->filename);
}
qapi_free_ChardevInfoList(char_info);
}
void hmp_info_mice(Monitor *mon, const QDict *qdict)
{
MouseInfoList *mice_list, *mouse;
mice_list = qmp_query_mice(NULL);
if (!mice_list) {
monitor_printf(mon, "No mouse devices connected\n");
return;
}
for (mouse = mice_list; mouse; mouse = mouse->next) {
monitor_printf(mon, "%c Mouse #%" PRId64 ": %s%s\n",
mouse->value->current ? '*' : ' ',
mouse->value->index, mouse->value->name,
mouse->value->absolute ? " (absolute)" : "");
}
qapi_free_MouseInfoList(mice_list);
}
static char *SocketAddress_to_str(SocketAddress *addr)
{
switch (addr->type) {
case SOCKET_ADDRESS_TYPE_INET:
return g_strdup_printf("tcp:%s:%s",
addr->u.inet.host,
addr->u.inet.port);
case SOCKET_ADDRESS_TYPE_UNIX:
return g_strdup_printf("unix:%s",
addr->u.q_unix.path);
case SOCKET_ADDRESS_TYPE_FD:
return g_strdup_printf("fd:%s", addr->u.fd.str);
case SOCKET_ADDRESS_TYPE_VSOCK:
return g_strdup_printf("tcp:%s:%s",
addr->u.vsock.cid,
addr->u.vsock.port);
default:
return g_strdup("unknown address type");
}
}
void hmp_info_migrate(Monitor *mon, const QDict *qdict)
{
MigrationInfo *info;
MigrationCapabilityStatusList *caps, *cap;
info = qmp_query_migrate(NULL);
caps = qmp_query_migrate_capabilities(NULL);
migration_global_dump(mon);
/* do not display parameters during setup */
if (info->has_status && caps) {
monitor_printf(mon, "capabilities: ");
for (cap = caps; cap; cap = cap->next) {
monitor_printf(mon, "%s: %s ",
MigrationCapability_str(cap->value->capability),
cap->value->state ? "on" : "off");
}
monitor_printf(mon, "\n");
}
if (info->has_status) {
migration: add reporting of errors for outgoing migration Currently if an application initiates an outgoing migration, it may or may not, get an error reported back on failure. If the error occurs synchronously to the 'migrate' command execution, the client app will see the error message. This is the case for DNS lookup failures. If the error occurs asynchronously to the monitor command though, the error will be thrown away and the client left guessing about what went wrong. This is the case for failure to connect to the TCP server (eg due to wrong port, or firewall rules, or other similar errors). In the future we'll be adding more scope for errors to happen asynchronously with the TLS protocol handshake. TLS errors are hard to diagnose even when they are well reported, so discarding errors entirely will make it impossible to debug TLS connection problems. Management apps which do migration are already using 'query-migrate' / 'info migrate' to check up on progress of background migration operations and to see their end status. This is a fine place to also include the error message when things go wrong. This patch thus adds an 'error-desc' field to the MigrationInfo struct, which will be populated when the 'status' is set to 'failed': (qemu) migrate -d tcp:localhost:9001 (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed (Error connecting to socket: Connection refused) total time: 0 milliseconds In the HMP, when doing non-detached migration, it is also possible to display this error message directly to the app. (qemu) migrate tcp:localhost:9001 Error connecting to socket: Connection refused Or with QMP { "execute": "query-migrate", "arguments": {} } { "return": { "status": "failed", "error-desc": "address resolution failed for myhost:9000: No address associated with hostname" } } Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-04-27 13:05:00 +03:00
monitor_printf(mon, "Migration status: %s",
MigrationStatus_str(info->status));
migration: add reporting of errors for outgoing migration Currently if an application initiates an outgoing migration, it may or may not, get an error reported back on failure. If the error occurs synchronously to the 'migrate' command execution, the client app will see the error message. This is the case for DNS lookup failures. If the error occurs asynchronously to the monitor command though, the error will be thrown away and the client left guessing about what went wrong. This is the case for failure to connect to the TCP server (eg due to wrong port, or firewall rules, or other similar errors). In the future we'll be adding more scope for errors to happen asynchronously with the TLS protocol handshake. TLS errors are hard to diagnose even when they are well reported, so discarding errors entirely will make it impossible to debug TLS connection problems. Management apps which do migration are already using 'query-migrate' / 'info migrate' to check up on progress of background migration operations and to see their end status. This is a fine place to also include the error message when things go wrong. This patch thus adds an 'error-desc' field to the MigrationInfo struct, which will be populated when the 'status' is set to 'failed': (qemu) migrate -d tcp:localhost:9001 (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed (Error connecting to socket: Connection refused) total time: 0 milliseconds In the HMP, when doing non-detached migration, it is also possible to display this error message directly to the app. (qemu) migrate tcp:localhost:9001 Error connecting to socket: Connection refused Or with QMP { "execute": "query-migrate", "arguments": {} } { "return": { "status": "failed", "error-desc": "address resolution failed for myhost:9000: No address associated with hostname" } } Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-04-27 13:05:00 +03:00
if (info->status == MIGRATION_STATUS_FAILED &&
info->has_error_desc) {
monitor_printf(mon, " (%s)\n", info->error_desc);
} else {
monitor_printf(mon, "\n");
}
monitor_printf(mon, "total time: %" PRIu64 " milliseconds\n",
info->total_time);
if (info->has_expected_downtime) {
monitor_printf(mon, "expected downtime: %" PRIu64 " milliseconds\n",
info->expected_downtime);
}
if (info->has_downtime) {
monitor_printf(mon, "downtime: %" PRIu64 " milliseconds\n",
info->downtime);
}
if (info->has_setup_time) {
monitor_printf(mon, "setup: %" PRIu64 " milliseconds\n",
info->setup_time);
}
}
if (info->has_ram) {
monitor_printf(mon, "transferred ram: %" PRIu64 " kbytes\n",
info->ram->transferred >> 10);
monitor_printf(mon, "throughput: %0.2f mbps\n",
info->ram->mbps);
monitor_printf(mon, "remaining ram: %" PRIu64 " kbytes\n",
info->ram->remaining >> 10);
monitor_printf(mon, "total ram: %" PRIu64 " kbytes\n",
info->ram->total >> 10);
monitor_printf(mon, "duplicate: %" PRIu64 " pages\n",
info->ram->duplicate);
monitor_printf(mon, "skipped: %" PRIu64 " pages\n",
info->ram->skipped);
monitor_printf(mon, "normal: %" PRIu64 " pages\n",
info->ram->normal);
monitor_printf(mon, "normal bytes: %" PRIu64 " kbytes\n",
info->ram->normal_bytes >> 10);
monitor_printf(mon, "dirty sync count: %" PRIu64 "\n",
info->ram->dirty_sync_count);
monitor_printf(mon, "page size: %" PRIu64 " kbytes\n",
info->ram->page_size >> 10);
monitor_printf(mon, "multifd bytes: %" PRIu64 " kbytes\n",
info->ram->multifd_bytes >> 10);
monitor_printf(mon, "pages-per-second: %" PRIu64 "\n",
info->ram->pages_per_second);
if (info->ram->dirty_pages_rate) {
monitor_printf(mon, "dirty pages rate: %" PRIu64 " pages\n",
info->ram->dirty_pages_rate);
}
if (info->ram->postcopy_requests) {
monitor_printf(mon, "postcopy request count: %" PRIu64 "\n",
info->ram->postcopy_requests);
}
}
if (info->has_disk) {
monitor_printf(mon, "transferred disk: %" PRIu64 " kbytes\n",
info->disk->transferred >> 10);
monitor_printf(mon, "remaining disk: %" PRIu64 " kbytes\n",
info->disk->remaining >> 10);
monitor_printf(mon, "total disk: %" PRIu64 " kbytes\n",
info->disk->total >> 10);
}
if (info->has_xbzrle_cache) {
monitor_printf(mon, "cache size: %" PRIu64 " bytes\n",
info->xbzrle_cache->cache_size);
monitor_printf(mon, "xbzrle transferred: %" PRIu64 " kbytes\n",
info->xbzrle_cache->bytes >> 10);
monitor_printf(mon, "xbzrle pages: %" PRIu64 " pages\n",
info->xbzrle_cache->pages);
monitor_printf(mon, "xbzrle cache miss: %" PRIu64 "\n",
info->xbzrle_cache->cache_miss);
monitor_printf(mon, "xbzrle cache miss rate: %0.2f\n",
info->xbzrle_cache->cache_miss_rate);
monitor_printf(mon, "xbzrle overflow : %" PRIu64 "\n",
info->xbzrle_cache->overflow);
}
if (info->has_compression) {
monitor_printf(mon, "compression pages: %" PRIu64 " pages\n",
info->compression->pages);
monitor_printf(mon, "compression busy: %" PRIu64 "\n",
info->compression->busy);
monitor_printf(mon, "compression busy rate: %0.2f\n",
info->compression->busy_rate);
monitor_printf(mon, "compressed size: %" PRIu64 "\n",
info->compression->compressed_size);
monitor_printf(mon, "compression rate: %0.2f\n",
info->compression->compression_rate);
}
if (info->has_cpu_throttle_percentage) {
monitor_printf(mon, "cpu throttle percentage: %" PRIu64 "\n",
info->cpu_throttle_percentage);
}
if (info->has_postcopy_blocktime) {
monitor_printf(mon, "postcopy blocktime: %u\n",
info->postcopy_blocktime);
}
if (info->has_postcopy_vcpu_blocktime) {
Visitor *v;
char *str;
v = string_output_visitor_new(false, &str);
visit_type_uint32List(v, NULL, &info->postcopy_vcpu_blocktime, NULL);
visit_complete(v, &str);
monitor_printf(mon, "postcopy vcpu blocktime: %s\n", str);
g_free(str);
visit_free(v);
}
if (info->has_socket_address) {
SocketAddressList *addr;
monitor_printf(mon, "socket address: [\n");
for (addr = info->socket_address; addr; addr = addr->next) {
char *s = SocketAddress_to_str(addr->value);
monitor_printf(mon, "\t%s\n", s);
g_free(s);
}
monitor_printf(mon, "]\n");
}
qapi_free_MigrationInfo(info);
qapi_free_MigrationCapabilityStatusList(caps);
}
void hmp_info_migrate_capabilities(Monitor *mon, const QDict *qdict)
{
MigrationCapabilityStatusList *caps, *cap;
caps = qmp_query_migrate_capabilities(NULL);
if (caps) {
for (cap = caps; cap; cap = cap->next) {
monitor_printf(mon, "%s: %s\n",
MigrationCapability_str(cap->value->capability),
cap->value->state ? "on" : "off");
}
}
qapi_free_MigrationCapabilityStatusList(caps);
}
void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
{
MigrationParameters *params;
params = qmp_query_migrate_parameters(NULL);
if (params) {
monitor_printf(mon, "%s: %" PRIu64 " ms\n",
MigrationParameter_str(MIGRATION_PARAMETER_ANNOUNCE_INITIAL),
params->announce_initial);
monitor_printf(mon, "%s: %" PRIu64 " ms\n",
MigrationParameter_str(MIGRATION_PARAMETER_ANNOUNCE_MAX),
params->announce_max);
monitor_printf(mon, "%s: %" PRIu64 "\n",
MigrationParameter_str(MIGRATION_PARAMETER_ANNOUNCE_ROUNDS),
params->announce_rounds);
monitor_printf(mon, "%s: %" PRIu64 " ms\n",
MigrationParameter_str(MIGRATION_PARAMETER_ANNOUNCE_STEP),
params->announce_step);
assert(params->has_compress_level);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_LEVEL),
params->compress_level);
assert(params->has_compress_threads);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_THREADS),
params->compress_threads);
assert(params->has_compress_wait_thread);
monitor_printf(mon, "%s: %s\n",
MigrationParameter_str(MIGRATION_PARAMETER_COMPRESS_WAIT_THREAD),
params->compress_wait_thread ? "on" : "off");
assert(params->has_decompress_threads);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_DECOMPRESS_THREADS),
params->decompress_threads);
assert(params->has_cpu_throttle_initial);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_CPU_THROTTLE_INITIAL),
params->cpu_throttle_initial);
assert(params->has_cpu_throttle_increment);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_CPU_THROTTLE_INCREMENT),
params->cpu_throttle_increment);
assert(params->has_max_cpu_throttle);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_MAX_CPU_THROTTLE),
params->max_cpu_throttle);
assert(params->has_tls_creds);
monitor_printf(mon, "%s: '%s'\n",
MigrationParameter_str(MIGRATION_PARAMETER_TLS_CREDS),
params->tls_creds);
assert(params->has_tls_hostname);
monitor_printf(mon, "%s: '%s'\n",
MigrationParameter_str(MIGRATION_PARAMETER_TLS_HOSTNAME),
params->tls_hostname);
assert(params->has_max_bandwidth);
monitor_printf(mon, "%s: %" PRIu64 " bytes/second\n",
MigrationParameter_str(MIGRATION_PARAMETER_MAX_BANDWIDTH),
params->max_bandwidth);
assert(params->has_downtime_limit);
monitor_printf(mon, "%s: %" PRIu64 " milliseconds\n",
MigrationParameter_str(MIGRATION_PARAMETER_DOWNTIME_LIMIT),
params->downtime_limit);
assert(params->has_x_checkpoint_delay);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_X_CHECKPOINT_DELAY),
params->x_checkpoint_delay);
assert(params->has_block_incremental);
monitor_printf(mon, "%s: %s\n",
MigrationParameter_str(MIGRATION_PARAMETER_BLOCK_INCREMENTAL),
params->block_incremental ? "on" : "off");
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_X_MULTIFD_CHANNELS),
params->x_multifd_channels);
monitor_printf(mon, "%s: %u\n",
MigrationParameter_str(MIGRATION_PARAMETER_X_MULTIFD_PAGE_COUNT),
params->x_multifd_page_count);
monitor_printf(mon, "%s: %" PRIu64 "\n",
MigrationParameter_str(MIGRATION_PARAMETER_XBZRLE_CACHE_SIZE),
params->xbzrle_cache_size);
monitor_printf(mon, "%s: %" PRIu64 "\n",
MigrationParameter_str(MIGRATION_PARAMETER_MAX_POSTCOPY_BANDWIDTH),
params->max_postcopy_bandwidth);
}
qapi_free_MigrationParameters(params);
}
void hmp_info_migrate_cache_size(Monitor *mon, const QDict *qdict)
{
monitor_printf(mon, "xbzrel cache size: %" PRId64 " kbytes\n",
qmp_query_migrate_cache_size(NULL) >> 10);
}
void hmp_info_cpus(Monitor *mon, const QDict *qdict)
{
CpuInfoFastList *cpu_list, *cpu;
cpu_list = qmp_query_cpus_fast(NULL);
for (cpu = cpu_list; cpu; cpu = cpu->next) {
int active = ' ';
if (cpu->value->cpu_index == monitor_get_cpu_index()) {
active = '*';
}
monitor_printf(mon, "%c CPU #%" PRId64 ":", active,
cpu->value->cpu_index);
monitor_printf(mon, " thread_id=%" PRId64 "\n", cpu->value->thread_id);
}
qapi_free_CpuInfoFastList(cpu_list);
}
static void print_block_info(Monitor *mon, BlockInfo *info,
BlockDeviceInfo *inserted, bool verbose)
{
ImageInfo *image_info;
assert(!info || !info->has_inserted || info->inserted == inserted);
if (info && *info->device) {
monitor_printf(mon, "%s", info->device);
if (inserted && inserted->has_node_name) {
monitor_printf(mon, " (%s)", inserted->node_name);
}
} else {
assert(info || inserted);
monitor_printf(mon, "%s",
inserted && inserted->has_node_name ? inserted->node_name
: info && info->has_qdev ? info->qdev
: "<anonymous>");
}
if (inserted) {
monitor_printf(mon, ": %s (%s%s%s)\n",
inserted->file,
inserted->drv,
inserted->ro ? ", read-only" : "",
inserted->encrypted ? ", encrypted" : "");
} else {
monitor_printf(mon, ": [not inserted]\n");
}
if (info) {
if (info->has_qdev) {
monitor_printf(mon, " Attached to: %s\n", info->qdev);
}
if (info->has_io_status && info->io_status != BLOCK_DEVICE_IO_STATUS_OK) {
monitor_printf(mon, " I/O status: %s\n",
BlockDeviceIoStatus_str(info->io_status));
}
if (info->removable) {
monitor_printf(mon, " Removable device: %slocked, tray %s\n",
info->locked ? "" : "not ",
info->tray_open ? "open" : "closed");
}
}
hmp: Make "info block" output more readable HMP is meant for humans and you should notice it. This changes the output format to use a bit more space to display the information more readable and leaves out irrelevant information (e.g. mention only that an image is encrypted, but not when it's not; display I/O limits only if throttling is in effect; ...) Before: (qemu) info block ide0-hd0: removable=0 io-status=ok file=/tmp/overlay.qcow2 backing_file=/tmp/backing.img backing_file_depth=1 ro=0 drv=qcow2 encrypted=1 bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: removable=1 locked=0 tray-open=0 io-status=ok file=/home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso ro=1 drv=raw encrypted=0 bps=0 bps_rd=0 bps_wr=0 iops=0 iops_rd=0 iops_wr=0 floppy0: removable=1 locked=0 tray-open=0 [not inserted] sd0: removable=1 locked=0 tray-open=0 [not inserted] After: (qemu) info block ide0-hd0: /tmp/overlay.qcow2 (qcow2, encrypted) Backing file: /tmp/backing.img (chain depth: 1) I/O limits: bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: /home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso (raw, read-only) Removable device: not locked, tray closed floppy0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-06-19 18:10:55 +04:00
if (!inserted) {
return;
}
monitor_printf(mon, " Cache mode: %s%s%s\n",
inserted->cache->writeback ? "writeback" : "writethrough",
inserted->cache->direct ? ", direct" : "",
inserted->cache->no_flush ? ", ignore flushes" : "");
if (inserted->has_backing_file) {
monitor_printf(mon,
" Backing file: %s "
"(chain depth: %" PRId64 ")\n",
inserted->backing_file,
inserted->backing_file_depth);
}
if (inserted->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF) {
monitor_printf(mon, " Detect zeroes: %s\n",
BlockdevDetectZeroesOptions_str(inserted->detect_zeroes));
}
hmp: Make "info block" output more readable HMP is meant for humans and you should notice it. This changes the output format to use a bit more space to display the information more readable and leaves out irrelevant information (e.g. mention only that an image is encrypted, but not when it's not; display I/O limits only if throttling is in effect; ...) Before: (qemu) info block ide0-hd0: removable=0 io-status=ok file=/tmp/overlay.qcow2 backing_file=/tmp/backing.img backing_file_depth=1 ro=0 drv=qcow2 encrypted=1 bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: removable=1 locked=0 tray-open=0 io-status=ok file=/home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso ro=1 drv=raw encrypted=0 bps=0 bps_rd=0 bps_wr=0 iops=0 iops_rd=0 iops_wr=0 floppy0: removable=1 locked=0 tray-open=0 [not inserted] sd0: removable=1 locked=0 tray-open=0 [not inserted] After: (qemu) info block ide0-hd0: /tmp/overlay.qcow2 (qcow2, encrypted) Backing file: /tmp/backing.img (chain depth: 1) I/O limits: bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: /home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso (raw, read-only) Removable device: not locked, tray closed floppy0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-06-19 18:10:55 +04:00
if (inserted->bps || inserted->bps_rd || inserted->bps_wr ||
inserted->iops || inserted->iops_rd || inserted->iops_wr)
{
monitor_printf(mon, " I/O throttling: bps=%" PRId64
" bps_rd=%" PRId64 " bps_wr=%" PRId64
" bps_max=%" PRId64
" bps_rd_max=%" PRId64
" bps_wr_max=%" PRId64
" iops=%" PRId64 " iops_rd=%" PRId64
" iops_wr=%" PRId64
" iops_max=%" PRId64
" iops_rd_max=%" PRId64
" iops_wr_max=%" PRId64
" iops_size=%" PRId64
" group=%s\n",
inserted->bps,
inserted->bps_rd,
inserted->bps_wr,
inserted->bps_max,
inserted->bps_rd_max,
inserted->bps_wr_max,
inserted->iops,
inserted->iops_rd,
inserted->iops_wr,
inserted->iops_max,
inserted->iops_rd_max,
inserted->iops_wr_max,
inserted->iops_size,
inserted->group);
}
hmp: Make "info block" output more readable HMP is meant for humans and you should notice it. This changes the output format to use a bit more space to display the information more readable and leaves out irrelevant information (e.g. mention only that an image is encrypted, but not when it's not; display I/O limits only if throttling is in effect; ...) Before: (qemu) info block ide0-hd0: removable=0 io-status=ok file=/tmp/overlay.qcow2 backing_file=/tmp/backing.img backing_file_depth=1 ro=0 drv=qcow2 encrypted=1 bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: removable=1 locked=0 tray-open=0 io-status=ok file=/home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso ro=1 drv=raw encrypted=0 bps=0 bps_rd=0 bps_wr=0 iops=0 iops_rd=0 iops_wr=0 floppy0: removable=1 locked=0 tray-open=0 [not inserted] sd0: removable=1 locked=0 tray-open=0 [not inserted] After: (qemu) info block ide0-hd0: /tmp/overlay.qcow2 (qcow2, encrypted) Backing file: /tmp/backing.img (chain depth: 1) I/O limits: bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: /home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso (raw, read-only) Removable device: not locked, tray closed floppy0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-06-19 18:10:55 +04:00
if (verbose) {
monitor_printf(mon, "\nImages:\n");
image_info = inserted->image;
while (1) {
bdrv_image_info_dump((fprintf_function)monitor_printf,
mon, image_info);
if (image_info->has_backing_image) {
image_info = image_info->backing_image;
} else {
break;
}
}
}
}
void hmp_info_block(Monitor *mon, const QDict *qdict)
{
BlockInfoList *block_list, *info;
BlockDeviceInfoList *blockdev_list, *blockdev;
const char *device = qdict_get_try_str(qdict, "device");
bool verbose = qdict_get_try_bool(qdict, "verbose", false);
bool nodes = qdict_get_try_bool(qdict, "nodes", false);
bool printed = false;
/* Print BlockBackend information */
if (!nodes) {
block_list = qmp_query_block(NULL);
} else {
block_list = NULL;
}
hmp: Make "info block" output more readable HMP is meant for humans and you should notice it. This changes the output format to use a bit more space to display the information more readable and leaves out irrelevant information (e.g. mention only that an image is encrypted, but not when it's not; display I/O limits only if throttling is in effect; ...) Before: (qemu) info block ide0-hd0: removable=0 io-status=ok file=/tmp/overlay.qcow2 backing_file=/tmp/backing.img backing_file_depth=1 ro=0 drv=qcow2 encrypted=1 bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: removable=1 locked=0 tray-open=0 io-status=ok file=/home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso ro=1 drv=raw encrypted=0 bps=0 bps_rd=0 bps_wr=0 iops=0 iops_rd=0 iops_wr=0 floppy0: removable=1 locked=0 tray-open=0 [not inserted] sd0: removable=1 locked=0 tray-open=0 [not inserted] After: (qemu) info block ide0-hd0: /tmp/overlay.qcow2 (qcow2, encrypted) Backing file: /tmp/backing.img (chain depth: 1) I/O limits: bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: /home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso (raw, read-only) Removable device: not locked, tray closed floppy0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-06-19 18:10:55 +04:00
for (info = block_list; info; info = info->next) {
if (device && strcmp(device, info->value->device)) {
continue;
}
if (info != block_list) {
monitor_printf(mon, "\n");
hmp: Make "info block" output more readable HMP is meant for humans and you should notice it. This changes the output format to use a bit more space to display the information more readable and leaves out irrelevant information (e.g. mention only that an image is encrypted, but not when it's not; display I/O limits only if throttling is in effect; ...) Before: (qemu) info block ide0-hd0: removable=0 io-status=ok file=/tmp/overlay.qcow2 backing_file=/tmp/backing.img backing_file_depth=1 ro=0 drv=qcow2 encrypted=1 bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: removable=1 locked=0 tray-open=0 io-status=ok file=/home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso ro=1 drv=raw encrypted=0 bps=0 bps_rd=0 bps_wr=0 iops=0 iops_rd=0 iops_wr=0 floppy0: removable=1 locked=0 tray-open=0 [not inserted] sd0: removable=1 locked=0 tray-open=0 [not inserted] After: (qemu) info block ide0-hd0: /tmp/overlay.qcow2 (qcow2, encrypted) Backing file: /tmp/backing.img (chain depth: 1) I/O limits: bps=0 bps_rd=0 bps_wr=0 iops=1024 iops_rd=0 iops_wr=0 ide1-cd0: /home/kwolf/images/iso/Fedora-18-x86_64-Live-Desktop.iso (raw, read-only) Removable device: not locked, tray closed floppy0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-06-19 18:10:55 +04:00
}
print_block_info(mon, info->value, info->value->has_inserted
? info->value->inserted : NULL,
verbose);
printed = true;
}
qapi_free_BlockInfoList(block_list);
if ((!device && !nodes) || printed) {
return;
}
/* Print node information */
blockdev_list = qmp_query_named_block_nodes(NULL);
for (blockdev = blockdev_list; blockdev; blockdev = blockdev->next) {
assert(blockdev->value->has_node_name);
if (device && strcmp(device, blockdev->value->node_name)) {
continue;
}
if (blockdev != blockdev_list) {
monitor_printf(mon, "\n");
}
print_block_info(mon, NULL, blockdev->value, verbose);
}
qapi_free_BlockDeviceInfoList(blockdev_list);
}
void hmp_info_blockstats(Monitor *mon, const QDict *qdict)
{
BlockStatsList *stats_list, *stats;
stats_list = qmp_query_blockstats(false, false, NULL);
for (stats = stats_list; stats; stats = stats->next) {
if (!stats->value->has_device) {
continue;
}
monitor_printf(mon, "%s:", stats->value->device);
monitor_printf(mon, " rd_bytes=%" PRId64
" wr_bytes=%" PRId64
" rd_operations=%" PRId64
" wr_operations=%" PRId64
" flush_operations=%" PRId64
" wr_total_time_ns=%" PRId64
" rd_total_time_ns=%" PRId64
" flush_total_time_ns=%" PRId64
" rd_merged=%" PRId64
" wr_merged=%" PRId64
" idle_time_ns=%" PRId64
"\n",
stats->value->stats->rd_bytes,
stats->value->stats->wr_bytes,
stats->value->stats->rd_operations,
stats->value->stats->wr_operations,
stats->value->stats->flush_operations,
stats->value->stats->wr_total_time_ns,
stats->value->stats->rd_total_time_ns,
stats->value->stats->flush_total_time_ns,
stats->value->stats->rd_merged,
stats->value->stats->wr_merged,
stats->value->stats->idle_time_ns);
}
qapi_free_BlockStatsList(stats_list);
}
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:56:47 +03:00
#ifdef CONFIG_VNC
/* Helper for hmp_info_vnc_clients, _servers */
static void hmp_info_VncBasicInfo(Monitor *mon, VncBasicInfo *info,
const char *name)
{
monitor_printf(mon, " %s: %s:%s (%s%s)\n",
name,
info->host,
info->service,
NetworkAddressFamily_str(info->family),
info->websocket ? " (Websocket)" : "");
}
/* Helper displaying and auth and crypt info */
static void hmp_info_vnc_authcrypt(Monitor *mon, const char *indent,
VncPrimaryAuth auth,
VncVencryptSubAuth *vencrypt)
{
monitor_printf(mon, "%sAuth: %s (Sub: %s)\n", indent,
VncPrimaryAuth_str(auth),
vencrypt ? VncVencryptSubAuth_str(*vencrypt) : "none");
}
static void hmp_info_vnc_clients(Monitor *mon, VncClientInfoList *client)
{
while (client) {
VncClientInfo *cinfo = client->value;
hmp_info_VncBasicInfo(mon, qapi_VncClientInfo_base(cinfo), "Client");
monitor_printf(mon, " x509_dname: %s\n",
cinfo->has_x509_dname ?
cinfo->x509_dname : "none");
monitor_printf(mon, " sasl_username: %s\n",
cinfo->has_sasl_username ?
cinfo->sasl_username : "none");
client = client->next;
}
}
static void hmp_info_vnc_servers(Monitor *mon, VncServerInfo2List *server)
{
while (server) {
VncServerInfo2 *sinfo = server->value;
hmp_info_VncBasicInfo(mon, qapi_VncServerInfo2_base(sinfo), "Server");
hmp_info_vnc_authcrypt(mon, " ", sinfo->auth,
sinfo->has_vencrypt ? &sinfo->vencrypt : NULL);
server = server->next;
}
}
void hmp_info_vnc(Monitor *mon, const QDict *qdict)
{
VncInfo2List *info2l;
Error *err = NULL;
info2l = qmp_query_vnc_servers(&err);
if (err) {
hmp_handle_error(mon, &err);
return;
}
if (!info2l) {
monitor_printf(mon, "None\n");
return;
}
while (info2l) {
VncInfo2 *info = info2l->value;
monitor_printf(mon, "%s:\n", info->id);
hmp_info_vnc_servers(mon, info->server);
hmp_info_vnc_clients(mon, info->clients);
if (!info->server) {
/* The server entry displays its auth, we only
* need to display in the case of 'reverse' connections
* where there's no server.
*/
hmp_info_vnc_authcrypt(mon, " ", info->auth,
info->has_vencrypt ? &info->vencrypt : NULL);
}
if (info->has_display) {
monitor_printf(mon, " Display: %s\n", info->display);
}
info2l = info2l->next;
}
qapi_free_VncInfo2List(info2l);
}
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:56:47 +03:00
#endif
#ifdef CONFIG_SPICE
void hmp_info_spice(Monitor *mon, const QDict *qdict)
{
SpiceChannelList *chan;
SpiceInfo *info;
const char *channel_name;
const char * const channel_names[] = {
[SPICE_CHANNEL_MAIN] = "main",
[SPICE_CHANNEL_DISPLAY] = "display",
[SPICE_CHANNEL_INPUTS] = "inputs",
[SPICE_CHANNEL_CURSOR] = "cursor",
[SPICE_CHANNEL_PLAYBACK] = "playback",
[SPICE_CHANNEL_RECORD] = "record",
[SPICE_CHANNEL_TUNNEL] = "tunnel",
[SPICE_CHANNEL_SMARTCARD] = "smartcard",
[SPICE_CHANNEL_USBREDIR] = "usbredir",
[SPICE_CHANNEL_PORT] = "port",
#if 0
/* minimum spice-protocol is 0.12.3, webdav was added in 0.12.7,
* no easy way to #ifdef (SPICE_CHANNEL_* is a enum). Disable
* as quick fix for build failures with older versions. */
[SPICE_CHANNEL_WEBDAV] = "webdav",
#endif
};
info = qmp_query_spice(NULL);
if (!info->enabled) {
monitor_printf(mon, "Server: disabled\n");
goto out;
}
monitor_printf(mon, "Server:\n");
if (info->has_port) {
monitor_printf(mon, " address: %s:%" PRId64 "\n",
info->host, info->port);
}
if (info->has_tls_port) {
monitor_printf(mon, " address: %s:%" PRId64 " [tls]\n",
info->host, info->tls_port);
}
monitor_printf(mon, " migrated: %s\n",
info->migrated ? "true" : "false");
monitor_printf(mon, " auth: %s\n", info->auth);
monitor_printf(mon, " compiled: %s\n", info->compiled_version);
monitor_printf(mon, " mouse-mode: %s\n",
SpiceQueryMouseMode_str(info->mouse_mode));
if (!info->has_channels || info->channels == NULL) {
monitor_printf(mon, "Channels: none\n");
} else {
for (chan = info->channels; chan; chan = chan->next) {
monitor_printf(mon, "Channel:\n");
monitor_printf(mon, " address: %s:%s%s\n",
qapi: Unbox base members Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616a "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-27 01:34:49 +03:00
chan->value->host, chan->value->port,
chan->value->tls ? " [tls]" : "");
monitor_printf(mon, " session: %" PRId64 "\n",
chan->value->connection_id);
monitor_printf(mon, " channel: %" PRId64 ":%" PRId64 "\n",
chan->value->channel_type, chan->value->channel_id);
channel_name = "unknown";
if (chan->value->channel_type > 0 &&
chan->value->channel_type < ARRAY_SIZE(channel_names) &&
channel_names[chan->value->channel_type]) {
channel_name = channel_names[chan->value->channel_type];
}
monitor_printf(mon, " channel name: %s\n", channel_name);
}
}
out:
qapi_free_SpiceInfo(info);
}
#endif
void hmp_info_balloon(Monitor *mon, const QDict *qdict)
{
BalloonInfo *info;
Error *err = NULL;
info = qmp_query_balloon(&err);
if (err) {
hmp_handle_error(mon, &err);
return;
}
monitor_printf(mon, "balloon: actual=%" PRId64 "\n", info->actual >> 20);
qapi_free_BalloonInfo(info);
}
static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev)
{
PciMemoryRegionList *region;
monitor_printf(mon, " Bus %2" PRId64 ", ", dev->bus);
monitor_printf(mon, "device %3" PRId64 ", function %" PRId64 ":\n",
dev->slot, dev->function);
monitor_printf(mon, " ");
if (dev->class_info->has_desc) {
monitor_printf(mon, "%s", dev->class_info->desc);
} else {
monitor_printf(mon, "Class %04" PRId64, dev->class_info->q_class);
}
monitor_printf(mon, ": PCI device %04" PRIx64 ":%04" PRIx64 "\n",
dev->id->vendor, dev->id->device);
if (dev->id->has_subsystem_vendor && dev->id->has_subsystem) {
monitor_printf(mon, " PCI subsystem %04" PRIx64 ":%04" PRIx64 "\n",
dev->id->subsystem_vendor, dev->id->subsystem);
}
if (dev->has_irq) {
monitor_printf(mon, " IRQ %" PRId64 ".\n", dev->irq);
}
if (dev->has_pci_bridge) {
monitor_printf(mon, " BUS %" PRId64 ".\n",
dev->pci_bridge->bus->number);
monitor_printf(mon, " secondary bus %" PRId64 ".\n",
dev->pci_bridge->bus->secondary);
monitor_printf(mon, " subordinate bus %" PRId64 ".\n",
dev->pci_bridge->bus->subordinate);
monitor_printf(mon, " IO range [0x%04"PRIx64", 0x%04"PRIx64"]\n",
dev->pci_bridge->bus->io_range->base,
dev->pci_bridge->bus->io_range->limit);
monitor_printf(mon,
" memory range [0x%08"PRIx64", 0x%08"PRIx64"]\n",
dev->pci_bridge->bus->memory_range->base,
dev->pci_bridge->bus->memory_range->limit);
monitor_printf(mon, " prefetchable memory range "
"[0x%08"PRIx64", 0x%08"PRIx64"]\n",
dev->pci_bridge->bus->prefetchable_range->base,
dev->pci_bridge->bus->prefetchable_range->limit);
}
for (region = dev->regions; region; region = region->next) {
uint64_t addr, size;
addr = region->value->address;
size = region->value->size;
monitor_printf(mon, " BAR%" PRId64 ": ", region->value->bar);
if (!strcmp(region->value->type, "io")) {
monitor_printf(mon, "I/O at 0x%04" PRIx64
" [0x%04" PRIx64 "].\n",
addr, addr + size - 1);
} else {
monitor_printf(mon, "%d bit%s memory at 0x%08" PRIx64
" [0x%08" PRIx64 "].\n",
region->value->mem_type_64 ? 64 : 32,
region->value->prefetch ? " prefetchable" : "",
addr, addr + size - 1);
}
}
monitor_printf(mon, " id \"%s\"\n", dev->qdev_id);
if (dev->has_pci_bridge) {
if (dev->pci_bridge->has_devices) {
PciDeviceInfoList *cdev;
for (cdev = dev->pci_bridge->devices; cdev; cdev = cdev->next) {
hmp_info_pci_device(mon, cdev->value);
}
}
}
}
static int hmp_info_irq_foreach(Object *obj, void *opaque)
{
InterruptStatsProvider *intc;
InterruptStatsProviderClass *k;
Monitor *mon = opaque;
if (object_dynamic_cast(obj, TYPE_INTERRUPT_STATS_PROVIDER)) {
intc = INTERRUPT_STATS_PROVIDER(obj);
k = INTERRUPT_STATS_PROVIDER_GET_CLASS(obj);
uint64_t *irq_counts;
unsigned int nb_irqs, i;
if (k->get_statistics &&
k->get_statistics(intc, &irq_counts, &nb_irqs)) {
if (nb_irqs > 0) {
monitor_printf(mon, "IRQ statistics for %s:\n",
object_get_typename(obj));
for (i = 0; i < nb_irqs; i++) {
if (irq_counts[i] > 0) {
monitor_printf(mon, "%2d: %" PRId64 "\n", i,
irq_counts[i]);
}
}
}
} else {
monitor_printf(mon, "IRQ statistics not available for %s.\n",
object_get_typename(obj));
}
}
return 0;
}
void hmp_info_irq(Monitor *mon, const QDict *qdict)
{
object_child_foreach_recursive(object_get_root(),
hmp_info_irq_foreach, mon);
}
static int hmp_info_pic_foreach(Object *obj, void *opaque)
{
InterruptStatsProvider *intc;
InterruptStatsProviderClass *k;
Monitor *mon = opaque;
if (object_dynamic_cast(obj, TYPE_INTERRUPT_STATS_PROVIDER)) {
intc = INTERRUPT_STATS_PROVIDER(obj);
k = INTERRUPT_STATS_PROVIDER_GET_CLASS(obj);
if (k->print_info) {
k->print_info(intc, mon);
} else {
monitor_printf(mon, "Interrupt controller information not available for %s.\n",
object_get_typename(obj));
}
}
return 0;
}
void hmp_info_pic(Monitor *mon, const QDict *qdict)
{
object_child_foreach_recursive(object_get_root(),
hmp_info_pic_foreach, mon);
}
void hmp_info_pci(Monitor *mon, const QDict *qdict)
{
PciInfoList *info_list, *info;
Error *err = NULL;
info_list = qmp_query_pci(&err);
if (err) {
monitor_printf(mon, "PCI devices not supported\n");
error_free(err);
return;
}
for (info = info_list; info; info = info->next) {
PciDeviceInfoList *dev;
for (dev = info->value->devices; dev; dev = dev->next) {
hmp_info_pci_device(mon, dev->value);
}
}
qapi_free_PciInfoList(info_list);
}
void hmp_info_block_jobs(Monitor *mon, const QDict *qdict)
{
BlockJobInfoList *list;
Error *err = NULL;
list = qmp_query_block_jobs(&err);
assert(!err);
if (!list) {
monitor_printf(mon, "No active jobs\n");
return;
}
while (list) {
if (strcmp(list->value->type, "stream") == 0) {
monitor_printf(mon, "Streaming device %s: Completed %" PRId64
" of %" PRId64 " bytes, speed limit %" PRId64
" bytes/s\n",
list->value->device,
list->value->offset,
list->value->len,
list->value->speed);
} else {
monitor_printf(mon, "Type %s, device %s: Completed %" PRId64
" of %" PRId64 " bytes, speed limit %" PRId64
" bytes/s\n",
list->value->type,
list->value->device,
list->value->offset,
list->value->len,
list->value->speed);
}
list = list->next;
}
qapi_free_BlockJobInfoList(list);
}
void hmp_info_tpm(Monitor *mon, const QDict *qdict)
{
TPMInfoList *info_list, *info;
Error *err = NULL;
unsigned int c = 0;
TPMPassthroughOptions *tpo;
TPMEmulatorOptions *teo;
info_list = qmp_query_tpm(&err);
if (err) {
monitor_printf(mon, "TPM device not supported\n");
error_free(err);
return;
}
if (info_list) {
monitor_printf(mon, "TPM device:\n");
}
for (info = info_list; info; info = info->next) {
TPMInfo *ti = info->value;
monitor_printf(mon, " tpm%d: model=%s\n",
c, TpmModel_str(ti->model));
monitor_printf(mon, " \\ %s: type=%s",
ti->id, TpmTypeOptionsKind_str(ti->options->type));
switch (ti->options->type) {
case TPM_TYPE_OPTIONS_KIND_PASSTHROUGH:
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18 01:48:37 +03:00
tpo = ti->options->u.passthrough.data;
monitor_printf(mon, "%s%s%s%s",
tpo->has_path ? ",path=" : "",
tpo->has_path ? tpo->path : "",
tpo->has_cancel_path ? ",cancel-path=" : "",
tpo->has_cancel_path ? tpo->cancel_path : "");
break;
case TPM_TYPE_OPTIONS_KIND_EMULATOR:
teo = ti->options->u.emulator.data;
monitor_printf(mon, ",chardev=%s", teo->chardev);
break;
case TPM_TYPE_OPTIONS_KIND__MAX:
break;
}
monitor_printf(mon, "\n");
c++;
}
qapi_free_TPMInfoList(info_list);
}
void hmp_quit(Monitor *mon, const QDict *qdict)
{
monitor_suspend(mon);
qmp_quit(NULL);
}
void hmp_stop(Monitor *mon, const QDict *qdict)
{
qmp_stop(NULL);
}
void hmp_sync_profile(Monitor *mon, const QDict *qdict)
{
const char *op = qdict_get_try_str(qdict, "op");
if (op == NULL) {
bool on = qsp_is_enabled();
monitor_printf(mon, "sync-profile is %s\n", on ? "on" : "off");
return;
}
if (!strcmp(op, "on")) {
qsp_enable();
} else if (!strcmp(op, "off")) {
qsp_disable();
} else if (!strcmp(op, "reset")) {
qsp_reset();
} else {
Error *err = NULL;
error_setg(&err, QERR_INVALID_PARAMETER, op);
hmp_handle_error(mon, &err);
}
}
void hmp_system_reset(Monitor *mon, const QDict *qdict)
{
qmp_system_reset(NULL);
}
void hmp_system_powerdown(Monitor *mon, const QDict *qdict)
{
qmp_system_powerdown(NULL);
}
void hmp_exit_preconfig(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_x_exit_preconfig(&err);
hmp_handle_error(mon, &err);
}
void hmp_cpu(Monitor *mon, const QDict *qdict)
{
int64_t cpu_index;
/* XXX: drop the monitor_set_cpu() usage when all HMP commands that
use it are converted to the QAPI */
cpu_index = qdict_get_int(qdict, "index");
if (monitor_set_cpu(cpu_index) < 0) {
monitor_printf(mon, "invalid CPU index\n");
}
}
void hmp_memsave(Monitor *mon, const QDict *qdict)
{
uint32_t size = qdict_get_int(qdict, "size");
const char *filename = qdict_get_str(qdict, "filename");
uint64_t addr = qdict_get_int(qdict, "val");
Error *err = NULL;
int cpu_index = monitor_get_cpu_index();
if (cpu_index < 0) {
monitor_printf(mon, "No CPU available\n");
return;
}
qmp_memsave(addr, size, filename, true, cpu_index, &err);
hmp_handle_error(mon, &err);
}
void hmp_pmemsave(Monitor *mon, const QDict *qdict)
{
uint32_t size = qdict_get_int(qdict, "size");
const char *filename = qdict_get_str(qdict, "filename");
uint64_t addr = qdict_get_int(qdict, "val");
Error *err = NULL;
qmp_pmemsave(addr, size, filename, &err);
hmp_handle_error(mon, &err);
}
void hmp_ringbuf_write(Monitor *mon, const QDict *qdict)
{
const char *chardev = qdict_get_str(qdict, "device");
const char *data = qdict_get_str(qdict, "data");
Error *err = NULL;
qmp_ringbuf_write(chardev, data, false, 0, &err);
hmp_handle_error(mon, &err);
}
void hmp_ringbuf_read(Monitor *mon, const QDict *qdict)
{
uint32_t size = qdict_get_int(qdict, "size");
const char *chardev = qdict_get_str(qdict, "device");
char *data;
Error *err = NULL;
int i;
data = qmp_ringbuf_read(chardev, size, false, 0, &err);
if (err) {
hmp_handle_error(mon, &err);
return;
}
for (i = 0; data[i]; i++) {
unsigned char ch = data[i];
if (ch == '\\') {
monitor_printf(mon, "\\\\");
} else if ((ch < 0x20 && ch != '\n' && ch != '\t') || ch == 0x7F) {
monitor_printf(mon, "\\u%04X", ch);
} else {
monitor_printf(mon, "%c", ch);
}
}
monitor_printf(mon, "\n");
g_free(data);
}
void hmp_cont(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_cont(&err);
hmp_handle_error(mon, &err);
}
void hmp_system_wakeup(Monitor *mon, const QDict *qdict)
{
qmp hmp: Make system_wakeup check wake-up support and run state The qmp/hmp command 'system_wakeup' is simply a direct call to 'qemu_system_wakeup_request' from vl.c. This function verifies if runstate is SUSPENDED and if the wake up reason is valid before proceeding. However, no error or warning is thrown if any of those pre-requirements isn't met. There is no way for the caller to differentiate between a successful wakeup or an error state caused when trying to wake up a guest that wasn't suspended. This means that system_wakeup is silently failing, which can be considered a bug. Adding error handling isn't an API break in this case - applications that didn't check the result will remain broken, the ones that check it will have a chance to deal with it. Adding to that, the commit before previous created a new QMP API called query-current-machine, with a new flag called wakeup-suspend-support, that indicates if the guest has the capability of waking up from suspended state. Although such guest will never reach SUSPENDED state and erroring it out in this scenario would suffice, it is more informative for the user to differentiate between a failure because the guest isn't suspended versus a failure because the guest does not have support for wake up at all. All this considered, this patch changes qmp_system_wakeup to check if the guest is capable of waking up from suspend, and if it is suspended. After this patch, this is the output of system_wakeup in a guest that does not have wake-up from suspend support (ppc64): (qemu) system_wakeup wake-up from suspend is not supported by this guest (qemu) And this is the output of system_wakeup in a x86 guest that has the support but isn't suspended: (qemu) system_wakeup Unable to wake up: guest is not in suspended state (qemu) Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-4-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-05 22:47:01 +03:00
Error *err = NULL;
qmp_system_wakeup(&err);
hmp_handle_error(mon, &err);
}
void hmp_nmi(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_inject_nmi(&err);
hmp_handle_error(mon, &err);
}
void hmp_set_link(Monitor *mon, const QDict *qdict)
{
const char *name = qdict_get_str(qdict, "name");
bool up = qdict_get_bool(qdict, "up");
Error *err = NULL;
qmp_set_link(name, up, &err);
hmp_handle_error(mon, &err);
}
void hmp_block_passwd(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *password = qdict_get_str(qdict, "password");
Error *err = NULL;
qmp_block_passwd(true, device, false, NULL, password, &err);
hmp_handle_error(mon, &err);
}
void hmp_balloon(Monitor *mon, const QDict *qdict)
{
int64_t value = qdict_get_int(qdict, "value");
Error *err = NULL;
qmp_balloon(value, &err);
hmp_handle_error(mon, &err);
}
void hmp_block_resize(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
int64_t size = qdict_get_int(qdict, "size");
Error *err = NULL;
qmp_block_resize(true, device, false, NULL, size, &err);
hmp_handle_error(mon, &err);
}
void hmp_drive_mirror(Monitor *mon, const QDict *qdict)
{
const char *filename = qdict_get_str(qdict, "target");
const char *format = qdict_get_try_str(qdict, "format");
bool reuse = qdict_get_try_bool(qdict, "reuse", false);
bool full = qdict_get_try_bool(qdict, "full", false);
Error *err = NULL;
DriveMirror mirror = {
.device = (char *)qdict_get_str(qdict, "device"),
.target = (char *)filename,
.has_format = !!format,
.format = (char *)format,
.sync = full ? MIRROR_SYNC_MODE_FULL : MIRROR_SYNC_MODE_TOP,
.has_mode = true,
.mode = reuse ? NEW_IMAGE_MODE_EXISTING : NEW_IMAGE_MODE_ABSOLUTE_PATHS,
.unmap = true,
};
if (!filename) {
error_setg(&err, QERR_MISSING_PARAMETER, "target");
hmp_handle_error(mon, &err);
return;
}
qmp_drive_mirror(&mirror, &err);
hmp_handle_error(mon, &err);
}
void hmp_drive_backup(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *filename = qdict_get_str(qdict, "target");
const char *format = qdict_get_try_str(qdict, "format");
bool reuse = qdict_get_try_bool(qdict, "reuse", false);
bool full = qdict_get_try_bool(qdict, "full", false);
bool compress = qdict_get_try_bool(qdict, "compress", false);
Error *err = NULL;
DriveBackup backup = {
.device = (char *)device,
.target = (char *)filename,
.has_format = !!format,
.format = (char *)format,
.sync = full ? MIRROR_SYNC_MODE_FULL : MIRROR_SYNC_MODE_TOP,
.has_mode = true,
.mode = reuse ? NEW_IMAGE_MODE_EXISTING : NEW_IMAGE_MODE_ABSOLUTE_PATHS,
.has_compress = !!compress,
.compress = compress,
};
if (!filename) {
error_setg(&err, QERR_MISSING_PARAMETER, "target");
hmp_handle_error(mon, &err);
return;
}
qmp_drive_backup(&backup, &err);
hmp_handle_error(mon, &err);
}
void hmp_snapshot_blkdev(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *filename = qdict_get_try_str(qdict, "snapshot-file");
const char *format = qdict_get_try_str(qdict, "format");
bool reuse = qdict_get_try_bool(qdict, "reuse", false);
enum NewImageMode mode;
Error *err = NULL;
if (!filename) {
/* In the future, if 'snapshot-file' is not specified, the snapshot
will be taken internally. Today it's actually required. */
error_setg(&err, QERR_MISSING_PARAMETER, "snapshot-file");
hmp_handle_error(mon, &err);
return;
}
mode = reuse ? NEW_IMAGE_MODE_EXISTING : NEW_IMAGE_MODE_ABSOLUTE_PATHS;
qmp_blockdev_snapshot_sync(true, device, false, NULL,
filename, false, NULL,
!!format, format,
true, mode, &err);
hmp_handle_error(mon, &err);
}
void hmp_snapshot_blkdev_internal(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *name = qdict_get_str(qdict, "name");
Error *err = NULL;
qmp_blockdev_snapshot_internal_sync(device, name, &err);
hmp_handle_error(mon, &err);
}
void hmp_snapshot_delete_blkdev_internal(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *name = qdict_get_str(qdict, "name");
const char *id = qdict_get_try_str(qdict, "id");
Error *err = NULL;
qmp_blockdev_snapshot_delete_internal_sync(device, !!id, id,
true, name, &err);
hmp_handle_error(mon, &err);
}
void hmp_loadvm(Monitor *mon, const QDict *qdict)
{
int saved_vm_running = runstate_is_running();
const char *name = qdict_get_str(qdict, "name");
Error *err = NULL;
vm_stop(RUN_STATE_RESTORE_VM);
if (load_snapshot(name, &err) == 0 && saved_vm_running) {
vm_start();
}
hmp_handle_error(mon, &err);
}
void hmp_savevm(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
save_snapshot(qdict_get_try_str(qdict, "name"), &err);
hmp_handle_error(mon, &err);
}
void hmp_delvm(Monitor *mon, const QDict *qdict)
{
BlockDriverState *bs;
Error *err = NULL;
const char *name = qdict_get_str(qdict, "name");
if (bdrv_all_delete_snapshot(name, &bs, &err) < 0) {
error_reportf_err(err,
"Error while deleting snapshot on device '%s': ",
bdrv_get_device_name(bs));
}
}
void hmp_info_snapshots(Monitor *mon, const QDict *qdict)
{
BlockDriverState *bs, *bs1;
BdrvNextIterator it1;
QEMUSnapshotInfo *sn_tab, *sn;
bool no_snapshot = true;
int nb_sns, i;
int total;
int *global_snapshots;
AioContext *aio_context;
typedef struct SnapshotEntry {
QEMUSnapshotInfo sn;
QTAILQ_ENTRY(SnapshotEntry) next;
} SnapshotEntry;
typedef struct ImageEntry {
const char *imagename;
QTAILQ_ENTRY(ImageEntry) next;
QTAILQ_HEAD(, SnapshotEntry) snapshots;
} ImageEntry;
QTAILQ_HEAD(, ImageEntry) image_list =
QTAILQ_HEAD_INITIALIZER(image_list);
ImageEntry *image_entry, *next_ie;
SnapshotEntry *snapshot_entry;
bs = bdrv_all_find_vmstate_bs();
if (!bs) {
monitor_printf(mon, "No available block device supports snapshots\n");
return;
}
aio_context = bdrv_get_aio_context(bs);
aio_context_acquire(aio_context);
nb_sns = bdrv_snapshot_list(bs, &sn_tab);
aio_context_release(aio_context);
if (nb_sns < 0) {
monitor_printf(mon, "bdrv_snapshot_list: error %d\n", nb_sns);
return;
}
for (bs1 = bdrv_first(&it1); bs1; bs1 = bdrv_next(&it1)) {
int bs1_nb_sns = 0;
ImageEntry *ie;
SnapshotEntry *se;
AioContext *ctx = bdrv_get_aio_context(bs1);
aio_context_acquire(ctx);
if (bdrv_can_snapshot(bs1)) {
sn = NULL;
bs1_nb_sns = bdrv_snapshot_list(bs1, &sn);
if (bs1_nb_sns > 0) {
no_snapshot = false;
ie = g_new0(ImageEntry, 1);
ie->imagename = bdrv_get_device_name(bs1);
QTAILQ_INIT(&ie->snapshots);
QTAILQ_INSERT_TAIL(&image_list, ie, next);
for (i = 0; i < bs1_nb_sns; i++) {
se = g_new0(SnapshotEntry, 1);
se->sn = sn[i];
QTAILQ_INSERT_TAIL(&ie->snapshots, se, next);
}
}
g_free(sn);
}
aio_context_release(ctx);
}
if (no_snapshot) {
monitor_printf(mon, "There is no snapshot available.\n");
return;
}
global_snapshots = g_new0(int, nb_sns);
total = 0;
for (i = 0; i < nb_sns; i++) {
SnapshotEntry *next_sn;
if (bdrv_all_find_snapshot(sn_tab[i].name, &bs1) == 0) {
global_snapshots[total] = i;
total++;
QTAILQ_FOREACH(image_entry, &image_list, next) {
QTAILQ_FOREACH_SAFE(snapshot_entry, &image_entry->snapshots,
next, next_sn) {
if (!strcmp(sn_tab[i].name, snapshot_entry->sn.name)) {
QTAILQ_REMOVE(&image_entry->snapshots, snapshot_entry,
next);
g_free(snapshot_entry);
}
}
}
}
}
monitor_printf(mon, "List of snapshots present on all disks:\n");
if (total > 0) {
bdrv_snapshot_dump((fprintf_function)monitor_printf, mon, NULL);
monitor_printf(mon, "\n");
for (i = 0; i < total; i++) {
sn = &sn_tab[global_snapshots[i]];
/* The ID is not guaranteed to be the same on all images, so
* overwrite it.
*/
pstrcpy(sn->id_str, sizeof(sn->id_str), "--");
bdrv_snapshot_dump((fprintf_function)monitor_printf, mon, sn);
monitor_printf(mon, "\n");
}
} else {
monitor_printf(mon, "None\n");
}
QTAILQ_FOREACH(image_entry, &image_list, next) {
if (QTAILQ_EMPTY(&image_entry->snapshots)) {
continue;
}
monitor_printf(mon,
"\nList of partial (non-loadable) snapshots on '%s':\n",
image_entry->imagename);
bdrv_snapshot_dump((fprintf_function)monitor_printf, mon, NULL);
monitor_printf(mon, "\n");
QTAILQ_FOREACH(snapshot_entry, &image_entry->snapshots, next) {
bdrv_snapshot_dump((fprintf_function)monitor_printf, mon,
&snapshot_entry->sn);
monitor_printf(mon, "\n");
}
}
QTAILQ_FOREACH_SAFE(image_entry, &image_list, next, next_ie) {
SnapshotEntry *next_sn;
QTAILQ_FOREACH_SAFE(snapshot_entry, &image_entry->snapshots, next,
next_sn) {
g_free(snapshot_entry);
}
g_free(image_entry);
}
g_free(sn_tab);
g_free(global_snapshots);
}
void hmp_announce_self(Monitor *mon, const QDict *qdict)
{
qmp_announce_self(migrate_announce_params(), NULL);
}
void hmp_migrate_cancel(Monitor *mon, const QDict *qdict)
{
qmp_migrate_cancel(NULL);
}
void hmp_migrate_continue(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
const char *state = qdict_get_str(qdict, "state");
int val = qapi_enum_parse(&MigrationStatus_lookup, state, -1, &err);
if (val >= 0) {
qmp_migrate_continue(val, &err);
}
hmp_handle_error(mon, &err);
}
void hmp_migrate_incoming(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
const char *uri = qdict_get_str(qdict, "uri");
qmp_migrate_incoming(uri, &err);
hmp_handle_error(mon, &err);
}
void hmp_migrate_recover(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
const char *uri = qdict_get_str(qdict, "uri");
qmp_migrate_recover(uri, &err);
hmp_handle_error(mon, &err);
}
void hmp_migrate_pause(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_migrate_pause(&err);
hmp_handle_error(mon, &err);
}
/* Kept for backwards compatibility */
void hmp_migrate_set_downtime(Monitor *mon, const QDict *qdict)
{
double value = qdict_get_double(qdict, "value");
qmp_migrate_set_downtime(value, NULL);
}
void hmp_migrate_set_cache_size(Monitor *mon, const QDict *qdict)
{
int64_t value = qdict_get_int(qdict, "value");
Error *err = NULL;
qmp_migrate_set_cache_size(value, &err);
hmp_handle_error(mon, &err);
}
/* Kept for backwards compatibility */
void hmp_migrate_set_speed(Monitor *mon, const QDict *qdict)
{
int64_t value = qdict_get_int(qdict, "value");
qmp_migrate_set_speed(value, NULL);
}
void hmp_migrate_set_capability(Monitor *mon, const QDict *qdict)
{
const char *cap = qdict_get_str(qdict, "capability");
bool state = qdict_get_bool(qdict, "state");
Error *err = NULL;
MigrationCapabilityStatusList *caps = g_malloc0(sizeof(*caps));
int val;
val = qapi_enum_parse(&MigrationCapability_lookup, cap, -1, &err);
if (val < 0) {
goto end;
}
caps->value = g_malloc0(sizeof(*caps->value));
caps->value->capability = val;
caps->value->state = state;
caps->next = NULL;
qmp_migrate_set_capabilities(caps, &err);
end:
qapi_free_MigrationCapabilityStatusList(caps);
hmp_handle_error(mon, &err);
}
void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
{
const char *param = qdict_get_str(qdict, "parameter");
const char *valuestr = qdict_get_str(qdict, "value");
Visitor *v = string_input_visitor_new(valuestr);
MigrateSetParameters *p = g_new0(MigrateSetParameters, 1);
uint64_t valuebw = 0;
uint64_t cache_size;
Error *err = NULL;
int val, ret;
val = qapi_enum_parse(&MigrationParameter_lookup, param, -1, &err);
if (val < 0) {
goto cleanup;
}
switch (val) {
case MIGRATION_PARAMETER_COMPRESS_LEVEL:
p->has_compress_level = true;
visit_type_int(v, param, &p->compress_level, &err);
break;
case MIGRATION_PARAMETER_COMPRESS_THREADS:
p->has_compress_threads = true;
visit_type_int(v, param, &p->compress_threads, &err);
break;
case MIGRATION_PARAMETER_COMPRESS_WAIT_THREAD:
p->has_compress_wait_thread = true;
visit_type_bool(v, param, &p->compress_wait_thread, &err);
break;
case MIGRATION_PARAMETER_DECOMPRESS_THREADS:
p->has_decompress_threads = true;
visit_type_int(v, param, &p->decompress_threads, &err);
break;
case MIGRATION_PARAMETER_CPU_THROTTLE_INITIAL:
p->has_cpu_throttle_initial = true;
visit_type_int(v, param, &p->cpu_throttle_initial, &err);
break;
case MIGRATION_PARAMETER_CPU_THROTTLE_INCREMENT:
p->has_cpu_throttle_increment = true;
visit_type_int(v, param, &p->cpu_throttle_increment, &err);
break;
case MIGRATION_PARAMETER_MAX_CPU_THROTTLE:
p->has_max_cpu_throttle = true;
visit_type_int(v, param, &p->max_cpu_throttle, &err);
break;
case MIGRATION_PARAMETER_TLS_CREDS:
p->has_tls_creds = true;
p->tls_creds = g_new0(StrOrNull, 1);
p->tls_creds->type = QTYPE_QSTRING;
visit_type_str(v, param, &p->tls_creds->u.s, &err);
break;
case MIGRATION_PARAMETER_TLS_HOSTNAME:
p->has_tls_hostname = true;
p->tls_hostname = g_new0(StrOrNull, 1);
p->tls_hostname->type = QTYPE_QSTRING;
visit_type_str(v, param, &p->tls_hostname->u.s, &err);
break;
case MIGRATION_PARAMETER_MAX_BANDWIDTH:
p->has_max_bandwidth = true;
/*
* Can't use visit_type_size() here, because it
* defaults to Bytes rather than Mebibytes.
*/
ret = qemu_strtosz_MiB(valuestr, NULL, &valuebw);
if (ret < 0 || valuebw > INT64_MAX
|| (size_t)valuebw != valuebw) {
error_setg(&err, "Invalid size %s", valuestr);
break;
}
p->max_bandwidth = valuebw;
break;
case MIGRATION_PARAMETER_DOWNTIME_LIMIT:
p->has_downtime_limit = true;
visit_type_int(v, param, &p->downtime_limit, &err);
break;
case MIGRATION_PARAMETER_X_CHECKPOINT_DELAY:
p->has_x_checkpoint_delay = true;
visit_type_int(v, param, &p->x_checkpoint_delay, &err);
break;
case MIGRATION_PARAMETER_BLOCK_INCREMENTAL:
p->has_block_incremental = true;
visit_type_bool(v, param, &p->block_incremental, &err);
break;
case MIGRATION_PARAMETER_X_MULTIFD_CHANNELS:
p->has_x_multifd_channels = true;
visit_type_int(v, param, &p->x_multifd_channels, &err);
break;
case MIGRATION_PARAMETER_X_MULTIFD_PAGE_COUNT:
p->has_x_multifd_page_count = true;
visit_type_int(v, param, &p->x_multifd_page_count, &err);
break;
case MIGRATION_PARAMETER_XBZRLE_CACHE_SIZE:
p->has_xbzrle_cache_size = true;
visit_type_size(v, param, &cache_size, &err);
if (err || cache_size > INT64_MAX
|| (size_t)cache_size != cache_size) {
error_setg(&err, "Invalid size %s", valuestr);
break;
}
p->xbzrle_cache_size = cache_size;
break;
case MIGRATION_PARAMETER_MAX_POSTCOPY_BANDWIDTH:
p->has_max_postcopy_bandwidth = true;
visit_type_size(v, param, &p->max_postcopy_bandwidth, &err);
break;
case MIGRATION_PARAMETER_ANNOUNCE_INITIAL:
p->has_announce_initial = true;
visit_type_size(v, param, &p->announce_initial, &err);
break;
case MIGRATION_PARAMETER_ANNOUNCE_MAX:
p->has_announce_max = true;
visit_type_size(v, param, &p->announce_max, &err);
break;
case MIGRATION_PARAMETER_ANNOUNCE_ROUNDS:
p->has_announce_rounds = true;
visit_type_size(v, param, &p->announce_rounds, &err);
break;
case MIGRATION_PARAMETER_ANNOUNCE_STEP:
p->has_announce_step = true;
visit_type_size(v, param, &p->announce_step, &err);
break;
default:
assert(0);
}
if (err) {
goto cleanup;
}
qmp_migrate_set_parameters(p, &err);
cleanup:
qapi_free_MigrateSetParameters(p);
visit_free(v);
hmp_handle_error(mon, &err);
}
void hmp_client_migrate_info(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
const char *protocol = qdict_get_str(qdict, "protocol");
const char *hostname = qdict_get_str(qdict, "hostname");
bool has_port = qdict_haskey(qdict, "port");
int port = qdict_get_try_int(qdict, "port", -1);
bool has_tls_port = qdict_haskey(qdict, "tls-port");
int tls_port = qdict_get_try_int(qdict, "tls-port", -1);
const char *cert_subject = qdict_get_try_str(qdict, "cert-subject");
qmp_client_migrate_info(protocol, hostname,
has_port, port, has_tls_port, tls_port,
!!cert_subject, cert_subject, &err);
hmp_handle_error(mon, &err);
}
void hmp_migrate_start_postcopy(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_migrate_start_postcopy(&err);
hmp_handle_error(mon, &err);
}
void hmp_x_colo_lost_heartbeat(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_x_colo_lost_heartbeat(&err);
hmp_handle_error(mon, &err);
}
void hmp_set_password(Monitor *mon, const QDict *qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
const char *password = qdict_get_str(qdict, "password");
const char *connected = qdict_get_try_str(qdict, "connected");
Error *err = NULL;
qmp_set_password(protocol, password, !!connected, connected, &err);
hmp_handle_error(mon, &err);
}
void hmp_expire_password(Monitor *mon, const QDict *qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
const char *whenstr = qdict_get_str(qdict, "time");
Error *err = NULL;
qmp_expire_password(protocol, whenstr, &err);
hmp_handle_error(mon, &err);
}
void hmp_eject(Monitor *mon, const QDict *qdict)
{
bool force = qdict_get_try_bool(qdict, "force", false);
const char *device = qdict_get_str(qdict, "device");
Error *err = NULL;
qmp_eject(true, device, false, NULL, true, force, &err);
hmp_handle_error(mon, &err);
}
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:56:47 +03:00
#ifdef CONFIG_VNC
static void hmp_change_read_arg(void *opaque, const char *password,
void *readline_opaque)
{
qmp_change_vnc_password(password, NULL);
monitor_read_command(opaque, 1);
}
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:56:47 +03:00
#endif
void hmp_change(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *target = qdict_get_str(qdict, "target");
const char *arg = qdict_get_try_str(qdict, "arg");
const char *read_only = qdict_get_try_str(qdict, "read-only-mode");
BlockdevChangeReadOnlyMode read_only_mode = 0;
Error *err = NULL;
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:56:47 +03:00
#ifdef CONFIG_VNC
if (strcmp(device, "vnc") == 0) {
if (read_only) {
monitor_printf(mon,
"Parameter 'read-only-mode' is invalid for VNC\n");
return;
}
if (strcmp(target, "passwd") == 0 ||
strcmp(target, "password") == 0) {
if (!arg) {
monitor_read_password(mon, hmp_change_read_arg, NULL);
return;
}
}
qmp_change("vnc", target, !!arg, arg, &err);
qapi: add conditions to VNC type/commands/events on the schema Add #if defined(CONFIG_VNC) in generated code, and adjust the qmp/hmp code accordingly. query-qmp-schema no longer reports the command/events etc as available when disabled at compile. Commands made conditional: * query-vnc, query-vnc-servers, change-vnc-password Before the patch, the commands for !CONFIG_VNC are stubs that fail like this: {"error": {"class": "GenericError", "desc": "The feature 'vnc' is not enabled"}} Afterwards, they fail like this: {"error": {"class": "CommandNotFound", "desc": "The command FOO has not been found"}} I call that an improvement, because it lets clients distinguish between command unavailable (class CommandNotFound) and command failed (class GenericError). Events made conditional: * VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED HMP change: * info vnc Will return "unknown command: 'info vnc'" when VNC is compiled out (same as error for spice when --disable-spice) Occurrences of VNC (case insensitive) in the schema that aren't covered by this change: * add_client Command has other uses, including "socket bases character devices". These are unconditional as far as I can tell. * set_password, expire_password In theory, these commands could be used for managing any service's password. In practice, they're used for VNC and SPICE services. They're documented for "remote display session" / "remote display server". The service is selected by argument @protocol. The code special-cases protocol-specific argument checking, then calls a protocol-specific function to do the work. If it fails, the command fails with "Could not set password". It does when the service isn't compiled in (it's a stub then). We could make these commands conditional on the conjunction of all services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)], but I doubt it's worthwhile. * change Command has other uses, namely changing media. This patch inlines a stub; no functional change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:56:47 +03:00
} else
#endif
{
if (read_only) {
read_only_mode =
qapi_enum_parse(&BlockdevChangeReadOnlyMode_lookup,
read_only,
BLOCKDEV_CHANGE_READ_ONLY_MODE_RETAIN, &err);
if (err) {
hmp_handle_error(mon, &err);
return;
}
}
qmp_blockdev_change_medium(true, device, false, NULL, target,
!!arg, arg, !!read_only, read_only_mode,
&err);
}
hmp_handle_error(mon, &err);
}
void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
char *device = (char *) qdict_get_str(qdict, "device");
BlockIOThrottle throttle = {
.bps = qdict_get_int(qdict, "bps"),
.bps_rd = qdict_get_int(qdict, "bps_rd"),
.bps_wr = qdict_get_int(qdict, "bps_wr"),
.iops = qdict_get_int(qdict, "iops"),
.iops_rd = qdict_get_int(qdict, "iops_rd"),
.iops_wr = qdict_get_int(qdict, "iops_wr"),
};
/* qmp_block_set_io_throttle has separate parameters for the
* (deprecated) block device name and the qdev ID but the HMP
* version has only one, so we must decide which one to pass. */
if (blk_by_name(device)) {
throttle.has_device = true;
throttle.device = device;
} else {
throttle.has_id = true;
throttle.id = device;
}
qmp_block_set_io_throttle(&throttle, &err);
hmp_handle_error(mon, &err);
}
void hmp_block_stream(Monitor *mon, const QDict *qdict)
{
Error *error = NULL;
const char *device = qdict_get_str(qdict, "device");
const char *base = qdict_get_try_str(qdict, "base");
int64_t speed = qdict_get_try_int(qdict, "speed", 0);
qmp_block_stream(true, device, device, base != NULL, base, false, NULL,
false, NULL, qdict_haskey(qdict, "speed"), speed, true,
BLOCKDEV_ON_ERROR_REPORT, false, false, false, false,
&error);
hmp_handle_error(mon, &error);
}
void hmp_block_job_set_speed(Monitor *mon, const QDict *qdict)
{
Error *error = NULL;
const char *device = qdict_get_str(qdict, "device");
int64_t value = qdict_get_int(qdict, "speed");
qmp_block_job_set_speed(device, value, &error);
hmp_handle_error(mon, &error);
}
void hmp_block_job_cancel(Monitor *mon, const QDict *qdict)
{
Error *error = NULL;
const char *device = qdict_get_str(qdict, "device");
bool force = qdict_get_try_bool(qdict, "force", false);
qmp_block_job_cancel(device, true, force, &error);
hmp_handle_error(mon, &error);
}
void hmp_block_job_pause(Monitor *mon, const QDict *qdict)
{
Error *error = NULL;
const char *device = qdict_get_str(qdict, "device");
qmp_block_job_pause(device, &error);
hmp_handle_error(mon, &error);
}
void hmp_block_job_resume(Monitor *mon, const QDict *qdict)
{
Error *error = NULL;
const char *device = qdict_get_str(qdict, "device");
qmp_block_job_resume(device, &error);
hmp_handle_error(mon, &error);
}
void hmp_block_job_complete(Monitor *mon, const QDict *qdict)
{
Error *error = NULL;
const char *device = qdict_get_str(qdict, "device");
qmp_block_job_complete(device, &error);
hmp_handle_error(mon, &error);
}
typedef struct HMPMigrationStatus
{
QEMUTimer *timer;
Monitor *mon;
bool is_block_migration;
} HMPMigrationStatus;
static void hmp_migrate_status_cb(void *opaque)
{
HMPMigrationStatus *status = opaque;
MigrationInfo *info;
info = qmp_query_migrate(NULL);
if (!info->has_status || info->status == MIGRATION_STATUS_ACTIVE ||
info->status == MIGRATION_STATUS_SETUP) {
if (info->has_disk) {
int progress;
if (info->disk->remaining) {
progress = info->disk->transferred * 100 / info->disk->total;
} else {
progress = 100;
}
monitor_printf(status->mon, "Completed %d %%\r", progress);
monitor_flush(status->mon);
}
timer_mod(status->timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + 1000);
} else {
if (status->is_block_migration) {
monitor_printf(status->mon, "\n");
}
migration: add reporting of errors for outgoing migration Currently if an application initiates an outgoing migration, it may or may not, get an error reported back on failure. If the error occurs synchronously to the 'migrate' command execution, the client app will see the error message. This is the case for DNS lookup failures. If the error occurs asynchronously to the monitor command though, the error will be thrown away and the client left guessing about what went wrong. This is the case for failure to connect to the TCP server (eg due to wrong port, or firewall rules, or other similar errors). In the future we'll be adding more scope for errors to happen asynchronously with the TLS protocol handshake. TLS errors are hard to diagnose even when they are well reported, so discarding errors entirely will make it impossible to debug TLS connection problems. Management apps which do migration are already using 'query-migrate' / 'info migrate' to check up on progress of background migration operations and to see their end status. This is a fine place to also include the error message when things go wrong. This patch thus adds an 'error-desc' field to the MigrationInfo struct, which will be populated when the 'status' is set to 'failed': (qemu) migrate -d tcp:localhost:9001 (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed (Error connecting to socket: Connection refused) total time: 0 milliseconds In the HMP, when doing non-detached migration, it is also possible to display this error message directly to the app. (qemu) migrate tcp:localhost:9001 Error connecting to socket: Connection refused Or with QMP { "execute": "query-migrate", "arguments": {} } { "return": { "status": "failed", "error-desc": "address resolution failed for myhost:9000: No address associated with hostname" } } Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-04-27 13:05:00 +03:00
if (info->has_error_desc) {
error_report("%s", info->error_desc);
}
monitor_resume(status->mon);
timer_del(status->timer);
timer_free(status->timer);
g_free(status);
}
qapi_free_MigrationInfo(info);
}
void hmp_migrate(Monitor *mon, const QDict *qdict)
{
bool detach = qdict_get_try_bool(qdict, "detach", false);
bool blk = qdict_get_try_bool(qdict, "blk", false);
bool inc = qdict_get_try_bool(qdict, "inc", false);
bool resume = qdict_get_try_bool(qdict, "resume", false);
const char *uri = qdict_get_str(qdict, "uri");
Error *err = NULL;
qmp_migrate(uri, !!blk, blk, !!inc, inc,
false, false, true, resume, &err);
if (err) {
hmp_handle_error(mon, &err);
return;
}
if (!detach) {
HMPMigrationStatus *status;
if (monitor_suspend(mon) < 0) {
monitor_printf(mon, "terminal does not allow synchronous "
"migration, continuing detached\n");
return;
}
status = g_malloc0(sizeof(*status));
status->mon = mon;
status->is_block_migration = blk || inc;
status->timer = timer_new_ms(QEMU_CLOCK_REALTIME, hmp_migrate_status_cb,
status);
timer_mod(status->timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME));
}
}
void hmp_device_add(Monitor *mon, const QDict *qdict)
{
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 19:25:50 +03:00
Error *err = NULL;
qmp_device_add((QDict *)qdict, NULL, &err);
hmp_handle_error(mon, &err);
}
void hmp_device_del(Monitor *mon, const QDict *qdict)
{
const char *id = qdict_get_str(qdict, "id");
Error *err = NULL;
qmp_device_del(id, &err);
hmp_handle_error(mon, &err);
}
void hmp_dump_guest_memory(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
bool win_dmp = qdict_get_try_bool(qdict, "windmp", false);
bool paging = qdict_get_try_bool(qdict, "paging", false);
bool zlib = qdict_get_try_bool(qdict, "zlib", false);
bool lzo = qdict_get_try_bool(qdict, "lzo", false);
bool snappy = qdict_get_try_bool(qdict, "snappy", false);
const char *file = qdict_get_str(qdict, "filename");
bool has_begin = qdict_haskey(qdict, "begin");
bool has_length = qdict_haskey(qdict, "length");
bool has_detach = qdict_haskey(qdict, "detach");
int64_t begin = 0;
int64_t length = 0;
bool detach = false;
enum DumpGuestMemoryFormat dump_format = DUMP_GUEST_MEMORY_FORMAT_ELF;
char *prot;
if (zlib + lzo + snappy + win_dmp > 1) {
error_setg(&err, "only one of '-z|-l|-s|-w' can be set");
hmp_handle_error(mon, &err);
return;
}
if (win_dmp) {
dump_format = DUMP_GUEST_MEMORY_FORMAT_WIN_DMP;
}
if (zlib) {
dump_format = DUMP_GUEST_MEMORY_FORMAT_KDUMP_ZLIB;
}
if (lzo) {
dump_format = DUMP_GUEST_MEMORY_FORMAT_KDUMP_LZO;
}
if (snappy) {
dump_format = DUMP_GUEST_MEMORY_FORMAT_KDUMP_SNAPPY;
}
if (has_begin) {
begin = qdict_get_int(qdict, "begin");
}
if (has_length) {
length = qdict_get_int(qdict, "length");
}
if (has_detach) {
detach = qdict_get_bool(qdict, "detach");
}
prot = g_strconcat("file:", file, NULL);
qmp_dump_guest_memory(paging, prot, true, detach, has_begin, begin,
has_length, length, true, dump_format, &err);
hmp_handle_error(mon, &err);
g_free(prot);
}
void hmp_netdev_add(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
QemuOpts *opts;
opts = qemu_opts_from_qdict(qemu_find_opts("netdev"), qdict, &err);
if (err) {
goto out;
}
netdev_add(opts, &err);
if (err) {
qemu_opts_del(opts);
}
out:
hmp_handle_error(mon, &err);
}
void hmp_netdev_del(Monitor *mon, const QDict *qdict)
{
const char *id = qdict_get_str(qdict, "id");
Error *err = NULL;
qmp_netdev_del(id, &err);
hmp_handle_error(mon, &err);
}
void hmp_object_add(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
QemuOpts *opts;
Object *obj = NULL;
opts = qemu_opts_from_qdict(qemu_find_opts("object"), qdict, &err);
if (err) {
hmp_handle_error(mon, &err);
return;
}
obj = user_creatable_add_opts(opts, &err);
qemu_opts_del(opts);
if (err) {
hmp_handle_error(mon, &err);
}
if (obj) {
object_unref(obj);
}
}
void hmp_getfd(Monitor *mon, const QDict *qdict)
{
const char *fdname = qdict_get_str(qdict, "fdname");
Error *err = NULL;
qmp_getfd(fdname, &err);
hmp_handle_error(mon, &err);
}
void hmp_closefd(Monitor *mon, const QDict *qdict)
{
const char *fdname = qdict_get_str(qdict, "fdname");
Error *err = NULL;
qmp_closefd(fdname, &err);
hmp_handle_error(mon, &err);
}
void hmp_sendkey(Monitor *mon, const QDict *qdict)
{
const char *keys = qdict_get_str(qdict, "keys");
KeyValueList *keylist, *head = NULL, *tmp = NULL;
int has_hold_time = qdict_haskey(qdict, "hold-time");
int hold_time = qdict_get_try_int(qdict, "hold-time", -1);
Error *err = NULL;
const char *separator;
int keyname_len;
while (1) {
separator = qemu_strchrnul(keys, '-');
keyname_len = separator - keys;
/* Be compatible with old interface, convert user inputted "<" */
if (keys[0] == '<' && keyname_len == 1) {
keys = "less";
keyname_len = 4;
}
keylist = g_malloc0(sizeof(*keylist));
keylist->value = g_malloc0(sizeof(*keylist->value));
if (!head) {
head = keylist;
}
if (tmp) {
tmp->next = keylist;
}
tmp = keylist;
if (strstart(keys, "0x", NULL)) {
char *endp;
int value = strtoul(keys, &endp, 0);
assert(endp <= keys + keyname_len);
if (endp != keys + keyname_len) {
goto err_out;
}
keylist->value->type = KEY_VALUE_KIND_NUMBER;
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18 01:48:37 +03:00
keylist->value->u.number.data = value;
} else {
int idx = index_from_key(keys, keyname_len);
if (idx == Q_KEY_CODE__MAX) {
goto err_out;
}
keylist->value->type = KEY_VALUE_KIND_QCODE;
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18 01:48:37 +03:00
keylist->value->u.qcode.data = idx;
}
if (!*separator) {
break;
}
keys = separator + 1;
}
qmp_send_key(head, has_hold_time, hold_time, &err);
hmp_handle_error(mon, &err);
out:
qapi_free_KeyValueList(head);
return;
err_out:
monitor_printf(mon, "invalid parameter: %.*s\n", keyname_len, keys);
goto out;
}
void hmp_screendump(Monitor *mon, const QDict *qdict)
{
const char *filename = qdict_get_str(qdict, "filename");
const char *id = qdict_get_try_str(qdict, "device");
int64_t head = qdict_get_try_int(qdict, "head", 0);
Error *err = NULL;
qmp_screendump(filename, id != NULL, id, id != NULL, head, &err);
hmp_handle_error(mon, &err);
}
void hmp_nbd_server_start(Monitor *mon, const QDict *qdict)
{
const char *uri = qdict_get_str(qdict, "uri");
bool writable = qdict_get_try_bool(qdict, "writable", false);
bool all = qdict_get_try_bool(qdict, "all", false);
Error *local_err = NULL;
BlockInfoList *block_list, *info;
SocketAddress *addr;
if (writable && !all) {
error_setg(&local_err, "-w only valid together with -a");
goto exit;
}
/* First check if the address is valid and start the server. */
addr = socket_parse(uri, &local_err);
if (local_err != NULL) {
goto exit;
}
nbd_server_start(addr, NULL, NULL, &local_err);
qapi_free_SocketAddress(addr);
if (local_err != NULL) {
goto exit;
}
if (!all) {
return;
}
/* Then try adding all block devices. If one fails, close all and
* exit.
*/
block_list = qmp_query_block(NULL);
for (info = block_list; info; info = info->next) {
if (!info->value->has_inserted) {
continue;
}
qmp_nbd_server_add(info->value->device, false, NULL,
nbd: Allow bitmap export during QMP nbd-server-add With the experimental x-nbd-server-add-bitmap command, there was a window of time where an NBD client could see the export but not the associated dirty bitmap, which can cause a client that planned on using the dirty bitmap to be forced to treat the entire image as dirty as a safety fallback. Furthermore, if the QMP client successfully exports a disk but then fails to add the bitmap, it has to take on the burden of removing the export. Since we don't allow changing the exposed dirty bitmap (whether to a different bitmap, or removing advertisement of the bitmap), it is nicer to make the bitmap tied to the export at the time the export is created, with automatic failure to export if the bitmap is not available. The experimental command included an optional 'bitmap-export-name' field for remapping the name exposed over NBD to be different from the bitmap name stored on disk. However, my libvirt demo code for implementing differential backups on top of persistent bitmaps did not need to take advantage of that feature (it is instead possible to create a new temporary bitmap with the desired name, use block-dirty-bitmap-merge to merge one or more persistent bitmaps into the temporary, then associate the temporary with the NBD export, if control is needed over the exported bitmap name). Hence, I'm not copying that part of the experiment over to the stable addition. For more details on the libvirt demo, see https://www.redhat.com/archives/libvir-list/2018-October/msg01254.html, https://kvmforum2018.sched.com/event/FzuB/facilitating-incremental-backup-eric-blake-red-hat This patch focuses on the user interface, and reduces (but does not completely eliminate) the window where an NBD client can see the export but not the dirty bitmap, with less work to clean up after errors. Later patches will add further cleanups now that this interface is declared stable via a single QMP command, including removing the race window. Update test 223 to use the new interface. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-6-eblake@redhat.com>
2019-01-11 22:47:17 +03:00
true, writable, false, NULL, &local_err);
if (local_err != NULL) {
qmp_nbd_server_stop(NULL);
break;
}
}
qapi_free_BlockInfoList(block_list);
exit:
hmp_handle_error(mon, &local_err);
}
void hmp_nbd_server_add(Monitor *mon, const QDict *qdict)
{
const char *device = qdict_get_str(qdict, "device");
const char *name = qdict_get_try_str(qdict, "name");
bool writable = qdict_get_try_bool(qdict, "writable", false);
Error *local_err = NULL;
nbd: Allow bitmap export during QMP nbd-server-add With the experimental x-nbd-server-add-bitmap command, there was a window of time where an NBD client could see the export but not the associated dirty bitmap, which can cause a client that planned on using the dirty bitmap to be forced to treat the entire image as dirty as a safety fallback. Furthermore, if the QMP client successfully exports a disk but then fails to add the bitmap, it has to take on the burden of removing the export. Since we don't allow changing the exposed dirty bitmap (whether to a different bitmap, or removing advertisement of the bitmap), it is nicer to make the bitmap tied to the export at the time the export is created, with automatic failure to export if the bitmap is not available. The experimental command included an optional 'bitmap-export-name' field for remapping the name exposed over NBD to be different from the bitmap name stored on disk. However, my libvirt demo code for implementing differential backups on top of persistent bitmaps did not need to take advantage of that feature (it is instead possible to create a new temporary bitmap with the desired name, use block-dirty-bitmap-merge to merge one or more persistent bitmaps into the temporary, then associate the temporary with the NBD export, if control is needed over the exported bitmap name). Hence, I'm not copying that part of the experiment over to the stable addition. For more details on the libvirt demo, see https://www.redhat.com/archives/libvir-list/2018-October/msg01254.html, https://kvmforum2018.sched.com/event/FzuB/facilitating-incremental-backup-eric-blake-red-hat This patch focuses on the user interface, and reduces (but does not completely eliminate) the window where an NBD client can see the export but not the dirty bitmap, with less work to clean up after errors. Later patches will add further cleanups now that this interface is declared stable via a single QMP command, including removing the race window. Update test 223 to use the new interface. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-6-eblake@redhat.com>
2019-01-11 22:47:17 +03:00
qmp_nbd_server_add(device, !!name, name, true, writable,
false, NULL, &local_err);
hmp_handle_error(mon, &local_err);
}
void hmp_nbd_server_remove(Monitor *mon, const QDict *qdict)
{
const char *name = qdict_get_str(qdict, "name");
bool force = qdict_get_try_bool(qdict, "force", false);
Error *err = NULL;
/* Rely on NBD_SERVER_REMOVE_MODE_SAFE being the default */
qmp_nbd_server_remove(name, force, NBD_SERVER_REMOVE_MODE_HARD, &err);
hmp_handle_error(mon, &err);
}
void hmp_nbd_server_stop(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_nbd_server_stop(&err);
hmp_handle_error(mon, &err);
}
void hmp_cpu_add(Monitor *mon, const QDict *qdict)
{
int cpuid;
Error *err = NULL;
error_report("cpu_add is deprecated, please use device_add instead");
cpuid = qdict_get_int(qdict, "id");
qmp_cpu_add(cpuid, &err);
hmp_handle_error(mon, &err);
}
void hmp_chardev_add(Monitor *mon, const QDict *qdict)
{
const char *args = qdict_get_str(qdict, "args");
Error *err = NULL;
QemuOpts *opts;
QemuOpts: Wean off qerror_report_err() qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-13 14:50:26 +03:00
opts = qemu_opts_parse_noisily(qemu_find_opts("chardev"), args, true);
if (opts == NULL) {
error_setg(&err, "Parsing chardev args failed");
} else {
qemu_chr_new_from_opts(opts, NULL, &err);
net: don't poke at chardev internal QemuOpts The vhost-user & colo code is poking at the QemuOpts instance in the CharDriverState struct, not realizing that it is valid for this to be NULL. e.g. the following crash shows a codepath where it will be NULL: Program terminated with signal SIGSEGV, Segmentation fault. #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 617 QTAILQ_FOREACH(opt, &opts->head, next) { [Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))] (gdb) bt #0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617 #1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314 #2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360 #3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051 #4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108 #5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186 #6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205 #7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978 #8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105 #9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319 #10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369 #11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124 #12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994 #13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387 #14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399 #15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927 #16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84 #17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0 #18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213 #19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258 #20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506 #21 0x000055baf676587b in main_loop () at vl.c:1908 #22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604 (gdb) p opts $1 = (QemuOpts *) 0x0 The crash occurred when attaching vhost-user net via QMP: { "execute": "chardev-add", "arguments": { "id": "charnet2", "backend": { "type": "socket", "data": { "addr": { "type": "unix", "data": { "path": "/var/run/openvswitch/vhost-user1" } }, "wait": false, "server": false } } }, "id": "libvirt-19" } { "return": { }, "id": "libvirt-19" } { "execute": "netdev_add", "arguments": { "type": "vhost-user", "chardev": "charnet2", "id": "hostnet2" }, "id": "libvirt-20" } Code using chardevs should not be poking at the internals of the CharDriverState struct. What vhost-user wants is a chardev that is operating as reconnectable network service, along with the ability to do FD passing over the connection. The colo code simply wants a network service. Add a feature concept to the char drivers so that chardev users can query the actual features they wish to have supported. The QemuOpts member is removed to prevent future mistakes in this area. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-07 15:18:34 +03:00
qemu_opts_del(opts);
}
hmp_handle_error(mon, &err);
}
void hmp_chardev_change(Monitor *mon, const QDict *qdict)
{
const char *args = qdict_get_str(qdict, "args");
const char *id;
Error *err = NULL;
ChardevBackend *backend = NULL;
ChardevReturn *ret = NULL;
QemuOpts *opts = qemu_opts_parse_noisily(qemu_find_opts("chardev"), args,
true);
if (!opts) {
error_setg(&err, "Parsing chardev args failed");
goto end;
}
id = qdict_get_str(qdict, "id");
if (qemu_opts_id(opts)) {
error_setg(&err, "Unexpected 'id' parameter");
goto end;
}
backend = qemu_chr_parse_opts(opts, &err);
if (!backend) {
goto end;
}
ret = qmp_chardev_change(id, backend, &err);
end:
qapi_free_ChardevReturn(ret);
qapi_free_ChardevBackend(backend);
qemu_opts_del(opts);
hmp_handle_error(mon, &err);
}
void hmp_chardev_remove(Monitor *mon, const QDict *qdict)
{
Error *local_err = NULL;
qmp_chardev_remove(qdict_get_str(qdict, "id"), &local_err);
hmp_handle_error(mon, &local_err);
}
void hmp_chardev_send_break(Monitor *mon, const QDict *qdict)
{
Error *local_err = NULL;
qmp_chardev_send_break(qdict_get_str(qdict, "id"), &local_err);
hmp_handle_error(mon, &local_err);
}
void hmp_qemu_io(Monitor *mon, const QDict *qdict)
{
BlockBackend *blk;
BlockBackend *local_blk = NULL;
const char* device = qdict_get_str(qdict, "device");
const char* command = qdict_get_str(qdict, "command");
Error *err = NULL;
int ret;
blk = blk_by_name(device);
if (!blk) {
BlockDriverState *bs = bdrv_lookup_bs(NULL, device, &err);
if (bs) {
blk = local_blk = blk_new(0, BLK_PERM_ALL);
ret = blk_insert_bs(blk, bs, &err);
if (ret < 0) {
goto fail;
}
} else {
goto fail;
}
}
/*
* Notably absent: Proper permission management. This is sad, but it seems
* almost impossible to achieve without changing the semantics and thereby
* limiting the use cases of the qemu-io HMP command.
*
* In an ideal world we would unconditionally create a new BlockBackend for
* qemuio_command(), but we have commands like 'reopen' and want them to
* take effect on the exact BlockBackend whose name the user passed instead
* of just on a temporary copy of it.
*
* Another problem is that deleting the temporary BlockBackend involves
* draining all requests on it first, but some qemu-iotests cases want to
* issue multiple aio_read/write requests and expect them to complete in
* the background while the monitor has already returned.
*
* This is also what prevents us from saving the original permissions and
* restoring them later: We can't revoke permissions until all requests
* have completed, and we don't know when that is nor can we really let
* anything else run before we have revoken them to avoid race conditions.
*
* What happens now is that command() in qemu-io-cmds.c can extend the
* permissions if necessary for the qemu-io command. And they simply stay
* extended, possibly resulting in a read-only guest device keeping write
* permissions. Ugly, but it appears to be the lesser evil.
*/
qemuio_command(blk, command);
fail:
blk_unref(local_blk);
hmp_handle_error(mon, &err);
}
void hmp_object_del(Monitor *mon, const QDict *qdict)
{
const char *id = qdict_get_str(qdict, "id");
Error *err = NULL;
user_creatable_del(id, &err);
hmp_handle_error(mon, &err);
}
void hmp_info_memdev(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
MemdevList *memdev_list = qmp_query_memdev(&err);
MemdevList *m = memdev_list;
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
Visitor *v;
char *str;
while (m) {
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
v = string_output_visitor_new(false, &str);
visit_type_uint16List(v, NULL, &m->value->host_nodes, NULL);
monitor_printf(mon, "memory backend: %s\n", m->value->id);
monitor_printf(mon, " size: %" PRId64 "\n", m->value->size);
monitor_printf(mon, " merge: %s\n",
m->value->merge ? "true" : "false");
monitor_printf(mon, " dump: %s\n",
m->value->dump ? "true" : "false");
monitor_printf(mon, " prealloc: %s\n",
m->value->prealloc ? "true" : "false");
monitor_printf(mon, " policy: %s\n",
HostMemPolicy_str(m->value->policy));
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
visit_complete(v, &str);
monitor_printf(mon, " host nodes: %s\n", str);
g_free(str);
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 19:48:43 +03:00
visit_free(v);
m = m->next;
}
monitor_printf(mon, "\n");
qapi_free_MemdevList(memdev_list);
hmp_handle_error(mon, &err);
}
void hmp_info_memory_devices(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
MemoryDeviceInfoList *info_list = qmp_query_memory_devices(&err);
MemoryDeviceInfoList *info;
MemoryDeviceInfo *value;
PCDIMMDeviceInfo *di;
for (info = info_list; info; info = info->next) {
value = info->value;
if (value) {
switch (value->type) {
case MEMORY_DEVICE_INFO_KIND_DIMM:
qapi: Don't special-case simple union wrappers Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18 01:48:37 +03:00
di = value->u.dimm.data;
break;
case MEMORY_DEVICE_INFO_KIND_NVDIMM:
di = value->u.nvdimm.data;
break;
default:
di = NULL;
break;
}
if (di) {
monitor_printf(mon, "Memory device [%s]: \"%s\"\n",
MemoryDeviceInfoKind_str(value->type),
di->id ? di->id : "");
monitor_printf(mon, " addr: 0x%" PRIx64 "\n", di->addr);
monitor_printf(mon, " slot: %" PRId64 "\n", di->slot);
monitor_printf(mon, " node: %" PRId64 "\n", di->node);
monitor_printf(mon, " size: %" PRIu64 "\n", di->size);
monitor_printf(mon, " memdev: %s\n", di->memdev);
monitor_printf(mon, " hotplugged: %s\n",
di->hotplugged ? "true" : "false");
monitor_printf(mon, " hotpluggable: %s\n",
di->hotpluggable ? "true" : "false");
}
}
}
qapi_free_MemoryDeviceInfoList(info_list);
hmp_handle_error(mon, &err);
}
void hmp_info_iothreads(Monitor *mon, const QDict *qdict)
{
IOThreadInfoList *info_list = qmp_query_iothreads(NULL);
IOThreadInfoList *info;
IOThreadInfo *value;
for (info = info_list; info; info = info->next) {
value = info->value;
monitor_printf(mon, "%s:\n", value->id);
monitor_printf(mon, " thread_id=%" PRId64 "\n", value->thread_id);
monitor_printf(mon, " poll-max-ns=%" PRId64 "\n", value->poll_max_ns);
monitor_printf(mon, " poll-grow=%" PRId64 "\n", value->poll_grow);
monitor_printf(mon, " poll-shrink=%" PRId64 "\n", value->poll_shrink);
}
qapi_free_IOThreadInfoList(info_list);
}
void hmp_qom_list(Monitor *mon, const QDict *qdict)
{
const char *path = qdict_get_try_str(qdict, "path");
ObjectPropertyInfoList *list;
Error *err = NULL;
if (path == NULL) {
monitor_printf(mon, "/\n");
return;
}
list = qmp_qom_list(path, &err);
if (err == NULL) {
ObjectPropertyInfoList *start = list;
while (list != NULL) {
ObjectPropertyInfo *value = list->value;
monitor_printf(mon, "%s (%s)\n",
value->name, value->type);
list = list->next;
}
qapi_free_ObjectPropertyInfoList(start);
}
hmp_handle_error(mon, &err);
}
void hmp_qom_set(Monitor *mon, const QDict *qdict)
{
const char *path = qdict_get_str(qdict, "path");
const char *property = qdict_get_str(qdict, "property");
const char *value = qdict_get_str(qdict, "value");
Error *err = NULL;
bool ambiguous = false;
Object *obj;
obj = object_resolve_path(path, &ambiguous);
if (obj == NULL) {
error_set(&err, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", path);
} else {
if (ambiguous) {
monitor_printf(mon, "Warning: Path '%s' is ambiguous\n", path);
}
object_property_parse(obj, value, property, &err);
}
hmp_handle_error(mon, &err);
}
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
void hmp_rocker(Monitor *mon, const QDict *qdict)
{
const char *name = qdict_get_str(qdict, "name");
RockerSwitch *rocker;
Error *err = NULL;
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
rocker = qmp_query_rocker(name, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
return;
}
monitor_printf(mon, "name: %s\n", rocker->name);
monitor_printf(mon, "id: 0x%" PRIx64 "\n", rocker->id);
monitor_printf(mon, "ports: %d\n", rocker->ports);
qapi_free_RockerSwitch(rocker);
}
void hmp_rocker_ports(Monitor *mon, const QDict *qdict)
{
RockerPortList *list, *port;
const char *name = qdict_get_str(qdict, "name");
Error *err = NULL;
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
list = qmp_query_rocker_ports(name, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
return;
}
monitor_printf(mon, " ena/ speed/ auto\n");
monitor_printf(mon, " port link duplex neg?\n");
for (port = list; port; port = port->next) {
monitor_printf(mon, "%10s %-4s %-3s %2s %-3s\n",
port->value->name,
port->value->enabled ? port->value->link_up ?
"up" : "down" : "!ena",
port->value->speed == 10000 ? "10G" : "??",
port->value->duplex ? "FD" : "HD",
port->value->autoneg ? "Yes" : "No");
}
qapi_free_RockerPortList(list);
}
void hmp_rocker_of_dpa_flows(Monitor *mon, const QDict *qdict)
{
RockerOfDpaFlowList *list, *info;
const char *name = qdict_get_str(qdict, "name");
uint32_t tbl_id = qdict_get_try_int(qdict, "tbl_id", -1);
Error *err = NULL;
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
list = qmp_query_rocker_of_dpa_flows(name, tbl_id != -1, tbl_id, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
return;
}
monitor_printf(mon, "prio tbl hits key(mask) --> actions\n");
for (info = list; info; info = info->next) {
RockerOfDpaFlow *flow = info->value;
RockerOfDpaFlowKey *key = flow->key;
RockerOfDpaFlowMask *mask = flow->mask;
RockerOfDpaFlowAction *action = flow->action;
if (flow->hits) {
monitor_printf(mon, "%-4d %-3d %-4" PRIu64,
key->priority, key->tbl_id, flow->hits);
} else {
monitor_printf(mon, "%-4d %-3d ",
key->priority, key->tbl_id);
}
if (key->has_in_pport) {
monitor_printf(mon, " pport %d", key->in_pport);
if (mask->has_in_pport) {
monitor_printf(mon, "(0x%x)", mask->in_pport);
}
}
if (key->has_vlan_id) {
monitor_printf(mon, " vlan %d",
key->vlan_id & VLAN_VID_MASK);
if (mask->has_vlan_id) {
monitor_printf(mon, "(0x%x)", mask->vlan_id);
}
}
if (key->has_tunnel_id) {
monitor_printf(mon, " tunnel %d", key->tunnel_id);
if (mask->has_tunnel_id) {
monitor_printf(mon, "(0x%x)", mask->tunnel_id);
}
}
if (key->has_eth_type) {
switch (key->eth_type) {
case 0x0806:
monitor_printf(mon, " ARP");
break;
case 0x0800:
monitor_printf(mon, " IP");
break;
case 0x86dd:
monitor_printf(mon, " IPv6");
break;
case 0x8809:
monitor_printf(mon, " LACP");
break;
case 0x88cc:
monitor_printf(mon, " LLDP");
break;
default:
monitor_printf(mon, " eth type 0x%04x", key->eth_type);
break;
}
}
if (key->has_eth_src) {
if ((strcmp(key->eth_src, "01:00:00:00:00:00") == 0) &&
(mask->has_eth_src) &&
(strcmp(mask->eth_src, "01:00:00:00:00:00") == 0)) {
monitor_printf(mon, " src <any mcast/bcast>");
} else if ((strcmp(key->eth_src, "00:00:00:00:00:00") == 0) &&
(mask->has_eth_src) &&
(strcmp(mask->eth_src, "01:00:00:00:00:00") == 0)) {
monitor_printf(mon, " src <any ucast>");
} else {
monitor_printf(mon, " src %s", key->eth_src);
if (mask->has_eth_src) {
monitor_printf(mon, "(%s)", mask->eth_src);
}
}
}
if (key->has_eth_dst) {
if ((strcmp(key->eth_dst, "01:00:00:00:00:00") == 0) &&
(mask->has_eth_dst) &&
(strcmp(mask->eth_dst, "01:00:00:00:00:00") == 0)) {
monitor_printf(mon, " dst <any mcast/bcast>");
} else if ((strcmp(key->eth_dst, "00:00:00:00:00:00") == 0) &&
(mask->has_eth_dst) &&
(strcmp(mask->eth_dst, "01:00:00:00:00:00") == 0)) {
monitor_printf(mon, " dst <any ucast>");
} else {
monitor_printf(mon, " dst %s", key->eth_dst);
if (mask->has_eth_dst) {
monitor_printf(mon, "(%s)", mask->eth_dst);
}
}
}
if (key->has_ip_proto) {
monitor_printf(mon, " proto %d", key->ip_proto);
if (mask->has_ip_proto) {
monitor_printf(mon, "(0x%x)", mask->ip_proto);
}
}
if (key->has_ip_tos) {
monitor_printf(mon, " TOS %d", key->ip_tos);
if (mask->has_ip_tos) {
monitor_printf(mon, "(0x%x)", mask->ip_tos);
}
}
if (key->has_ip_dst) {
monitor_printf(mon, " dst %s", key->ip_dst);
}
if (action->has_goto_tbl || action->has_group_id ||
action->has_new_vlan_id) {
monitor_printf(mon, " -->");
}
if (action->has_new_vlan_id) {
monitor_printf(mon, " apply new vlan %d",
ntohs(action->new_vlan_id));
}
if (action->has_group_id) {
monitor_printf(mon, " write group 0x%08x", action->group_id);
}
if (action->has_goto_tbl) {
monitor_printf(mon, " goto tbl %d", action->goto_tbl);
}
monitor_printf(mon, "\n");
}
qapi_free_RockerOfDpaFlowList(list);
}
void hmp_rocker_of_dpa_groups(Monitor *mon, const QDict *qdict)
{
RockerOfDpaGroupList *list, *g;
const char *name = qdict_get_str(qdict, "name");
uint8_t type = qdict_get_try_int(qdict, "type", 9);
Error *err = NULL;
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
bool set = false;
list = qmp_query_rocker_of_dpa_groups(name, type != 9, type, &err);
if (err != NULL) {
hmp_handle_error(mon, &err);
qmp/hmp: add rocker device support Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-11 04:21:21 +03:00
return;
}
monitor_printf(mon, "id (decode) --> buckets\n");
for (g = list; g; g = g->next) {
RockerOfDpaGroup *group = g->value;
monitor_printf(mon, "0x%08x", group->id);
monitor_printf(mon, " (type %s", group->type == 0 ? "L2 interface" :
group->type == 1 ? "L2 rewrite" :
group->type == 2 ? "L3 unicast" :
group->type == 3 ? "L2 multicast" :
group->type == 4 ? "L2 flood" :
group->type == 5 ? "L3 interface" :
group->type == 6 ? "L3 multicast" :
group->type == 7 ? "L3 ECMP" :
group->type == 8 ? "L2 overlay" :
"unknown");
if (group->has_vlan_id) {
monitor_printf(mon, " vlan %d", group->vlan_id);
}
if (group->has_pport) {
monitor_printf(mon, " pport %d", group->pport);
}
if (group->has_index) {
monitor_printf(mon, " index %d", group->index);
}
monitor_printf(mon, ") -->");
if (group->has_set_vlan_id && group->set_vlan_id) {
set = true;
monitor_printf(mon, " set vlan %d",
group->set_vlan_id & VLAN_VID_MASK);
}
if (group->has_set_eth_src) {
if (!set) {
set = true;
monitor_printf(mon, " set");
}
monitor_printf(mon, " src %s", group->set_eth_src);
}
if (group->has_set_eth_dst) {
if (!set) {
set = true;
monitor_printf(mon, " set");
}
monitor_printf(mon, " dst %s", group->set_eth_dst);
}
set = false;
if (group->has_ttl_check && group->ttl_check) {
monitor_printf(mon, " check TTL");
}
if (group->has_group_id && group->group_id) {
monitor_printf(mon, " group id 0x%08x", group->group_id);
}
if (group->has_pop_vlan && group->pop_vlan) {
monitor_printf(mon, " pop vlan");
}
if (group->has_out_pport) {
monitor_printf(mon, " out pport %d", group->out_pport);
}
if (group->has_group_ids) {
struct uint32List *id;
monitor_printf(mon, " groups [");
for (id = group->group_ids; id; id = id->next) {
monitor_printf(mon, "0x%08x", id->value);
if (id->next) {
monitor_printf(mon, ",");
}
}
monitor_printf(mon, "]");
}
monitor_printf(mon, "\n");
}
qapi_free_RockerOfDpaGroupList(list);
}
void hmp_info_dump(Monitor *mon, const QDict *qdict)
{
DumpQueryResult *result = qmp_query_dump(NULL);
assert(result && result->status < DUMP_STATUS__MAX);
monitor_printf(mon, "Status: %s\n", DumpStatus_str(result->status));
if (result->status == DUMP_STATUS_ACTIVE) {
float percent = 0;
assert(result->total != 0);
percent = 100.0 * result->completed / result->total;
monitor_printf(mon, "Finished: %.2f %%\n", percent);
}
qapi_free_DumpQueryResult(result);
}
void hmp_info_ramblock(Monitor *mon, const QDict *qdict)
{
ram_block_dump(mon);
}
void hmp_hotpluggable_cpus(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
HotpluggableCPUList *l = qmp_query_hotpluggable_cpus(&err);
HotpluggableCPUList *saved = l;
CpuInstanceProperties *c;
if (err != NULL) {
hmp_handle_error(mon, &err);
return;
}
monitor_printf(mon, "Hotpluggable CPUs:\n");
while (l) {
monitor_printf(mon, " type: \"%s\"\n", l->value->type);
monitor_printf(mon, " vcpus_count: \"%" PRIu64 "\"\n",
l->value->vcpus_count);
if (l->value->has_qom_path) {
monitor_printf(mon, " qom_path: \"%s\"\n", l->value->qom_path);
}
c = l->value->props;
monitor_printf(mon, " CPUInstance Properties:\n");
if (c->has_node_id) {
monitor_printf(mon, " node-id: \"%" PRIu64 "\"\n", c->node_id);
}
if (c->has_socket_id) {
monitor_printf(mon, " socket-id: \"%" PRIu64 "\"\n", c->socket_id);
}
if (c->has_core_id) {
monitor_printf(mon, " core-id: \"%" PRIu64 "\"\n", c->core_id);
}
if (c->has_thread_id) {
monitor_printf(mon, " thread-id: \"%" PRIu64 "\"\n", c->thread_id);
}
l = l->next;
}
qapi_free_HotpluggableCPUList(saved);
}
void hmp_info_vm_generation_id(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
GuidInfo *info = qmp_query_vm_generation_id(&err);
if (info) {
monitor_printf(mon, "%s\n", info->guid);
}
hmp_handle_error(mon, &err);
qapi_free_GuidInfo(info);
}
void hmp_info_memory_size_summary(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
MemoryInfo *info = qmp_query_memory_size_summary(&err);
if (info) {
monitor_printf(mon, "base memory: %" PRIu64 "\n",
info->base_memory);
if (info->has_plugged_memory) {
monitor_printf(mon, "plugged memory: %" PRIu64 "\n",
info->plugged_memory);
}
qapi_free_MemoryInfo(info);
}
hmp_handle_error(mon, &err);
}