qemu/nbd/server.c

2469 lines
78 KiB
C
Raw Normal View History

/*
* Copyright (C) 2016-2018 Red Hat, Inc.
* Copyright (C) 2005 Anthony Liguori <anthony@codemonkey.ws>
*
* Network Block Device Server Side
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; under version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
2016-03-14 11:01:28 +03:00
#include "qapi/error.h"
#include "trace.h"
#include "nbd-internal.h"
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 18:25:10 +03:00
#define NBD_META_ID_BASE_ALLOCATION 0
#define NBD_META_ID_DIRTY_BITMAP 1
/* NBD_MAX_BITMAP_EXTENTS: 1 mb of extents data. An empirical
* constant. If an increase is needed, note that the NBD protocol
* recommends no larger than 32 mb, so that the client won't consider
* the reply as a denial of service attack. */
#define NBD_MAX_BITMAP_EXTENTS (0x100000 / 8)
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 18:25:10 +03:00
static int system_errno_to_nbd_errno(int err)
{
switch (err) {
case 0:
return NBD_SUCCESS;
case EPERM:
case EROFS:
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 18:25:10 +03:00
return NBD_EPERM;
case EIO:
return NBD_EIO;
case ENOMEM:
return NBD_ENOMEM;
#ifdef EDQUOT
case EDQUOT:
#endif
case EFBIG:
case ENOSPC:
return NBD_ENOSPC;
case EOVERFLOW:
return NBD_EOVERFLOW;
case ESHUTDOWN:
return NBD_ESHUTDOWN;
qemu-nbd: only send a limited number of errno codes on the wire Right now, NBD includes potentially platform-specific error values in the wire protocol. Luckily, most common error values are more or less universal: in particular, of all errno values <= 34 (up to ERANGE), they are all the same on supported platforms except for 11 (which is EAGAIN on Windows and Linux, but EDEADLK on Darwin and the *BSDs). So, in order to guarantee some portability, only keep a handful of possible error codes and squash everything else to EINVAL. This patch defines a limited set of errno values that are valid for the NBD protocol, and specifies recommendations for what error to return in specific corner cases. The set of errno values is roughly based on the errors listed in the read(2) and write(2) man pages, with some exceptions: - ENOMEM is added for servers that implement copy-on-write or other formats that require dynamic allocation. - EDQUOT is not part of the universal set of errors; it can be changed to ENOSPC on the wire format. - EFBIG is part of the universal set of errors, but it is also changed to ENOSPC because it is pretty similar to ENOSPC or EDQUOT. Incoming values will in general match system errno values, but not on the Hurd which has different errno values (they have a "subsystem code" equal to 0x10 in bits 24-31). The Hurd is probably not something to which QEMU has been ported, but still do the right thing and reverse-map the NBD errno values to the system errno values. The corresponding patch to the NBD protocol description can be found at http://article.gmane.org/gmane.linux.drivers.nbd.general/3154. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-07 18:25:10 +03:00
case EINVAL:
default:
return NBD_EINVAL;
}
}
/* Definitions for opaque data types */
typedef struct NBDRequestData NBDRequestData;
struct NBDRequestData {
QSIMPLEQ_ENTRY(NBDRequestData) entry;
NBDClient *client;
uint8_t *data;
bool complete;
};
struct NBDExport {
int refcount;
void (*close)(NBDExport *exp);
BlockBackend *blk;
char *name;
char *description;
uint64_t dev_offset;
uint64_t size;
uint16_t nbdflags;
QTAILQ_HEAD(, NBDClient) clients;
QTAILQ_ENTRY(NBDExport) next;
AioContext *ctx;
BlockBackend *eject_notifier_blk;
Notifier eject_notifier;
BdrvDirtyBitmap *export_bitmap;
char *export_bitmap_context;
};
static QTAILQ_HEAD(, NBDExport) exports = QTAILQ_HEAD_INITIALIZER(exports);
/* NBDExportMetaContexts represents a list of contexts to be exported,
* as selected by NBD_OPT_SET_META_CONTEXT. Also used for
* NBD_OPT_LIST_META_CONTEXT. */
typedef struct NBDExportMetaContexts {
NBDExport *exp;
bool valid; /* means that negotiation of the option finished without
errors */
bool base_allocation; /* export base:allocation context (block status) */
bool bitmap; /* export qemu:dirty-bitmap:<export bitmap name> */
} NBDExportMetaContexts;
struct NBDClient {
int refcount;
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
void (*close_fn)(NBDClient *client, bool negotiated);
NBDExport *exp;
QCryptoTLSCreds *tlscreds;
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 19:20:33 +03:00
char *tlsauthz;
QIOChannelSocket *sioc; /* The underlying data channel */
QIOChannel *ioc; /* The current I/O channel which may differ (eg TLS) */
Coroutine *recv_coroutine;
CoMutex send_lock;
Coroutine *send_coroutine;
QTAILQ_ENTRY(NBDClient) next;
int nb_requests;
bool closing;
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 06:05:21 +03:00
uint32_t check_align; /* If non-zero, check for aligned client requests */
bool structured_reply;
NBDExportMetaContexts export_meta;
uint32_t opt; /* Current option being negotiated */
uint32_t optlen; /* remaining length of data in ioc for the option being
negotiated now */
};
static void nbd_client_receive_next_request(NBDClient *client);
/* Basic flow for negotiation
Server Client
Negotiate
or
Server Client
Negotiate #1
Option
Negotiate #2
----
followed by
Server Client
Request
Response
Request
Response
...
...
Request (type == 2)
*/
static inline void set_be_option_rep(NBDOptionReply *rep, uint32_t option,
uint32_t type, uint32_t length)
{
stq_be_p(&rep->magic, NBD_REP_MAGIC);
stl_be_p(&rep->option, option);
stl_be_p(&rep->type, type);
stl_be_p(&rep->length, length);
}
/* Send a reply header, including length, but no payload.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_send_rep_len(NBDClient *client, uint32_t type,
uint32_t len, Error **errp)
{
NBDOptionReply rep;
trace_nbd_negotiate_send_rep_len(client->opt, nbd_opt_lookup(client->opt),
type, nbd_rep_lookup(type), len);
assert(len < NBD_MAX_BUFFER_SIZE);
set_be_option_rep(&rep, client->opt, type, len);
return nbd_write(client->ioc, &rep, sizeof(rep), errp);
}
/* Send a reply header with default 0 length.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_send_rep(NBDClient *client, uint32_t type,
Error **errp)
{
return nbd_negotiate_send_rep_len(client, type, 0, errp);
}
/* Send an error reply.
* Return -errno on error, 0 on success. */
static int GCC_FMT_ATTR(4, 0)
nbd_negotiate_send_rep_verr(NBDClient *client, uint32_t type,
Error **errp, const char *fmt, va_list va)
{
char *msg;
int ret;
size_t len;
msg = g_strdup_vprintf(fmt, va);
len = strlen(msg);
assert(len < 4096);
trace_nbd_negotiate_send_rep_err(msg);
ret = nbd_negotiate_send_rep_len(client, type, len, errp);
if (ret < 0) {
goto out;
}
if (nbd_write(client->ioc, msg, len, errp) < 0) {
error_prepend(errp, "write failed (error message): ");
ret = -EIO;
} else {
ret = 0;
}
out:
g_free(msg);
return ret;
}
/* Send an error reply.
* Return -errno on error, 0 on success. */
static int GCC_FMT_ATTR(4, 5)
nbd_negotiate_send_rep_err(NBDClient *client, uint32_t type,
Error **errp, const char *fmt, ...)
{
va_list va;
int ret;
va_start(va, fmt);
ret = nbd_negotiate_send_rep_verr(client, type, errp, fmt, va);
va_end(va);
return ret;
}
/* Drop remainder of the current option, and send a reply with the
* given error type and message. Return -errno on read or write
* failure; or 0 if connection is still live. */
static int GCC_FMT_ATTR(4, 0)
nbd_opt_vdrop(NBDClient *client, uint32_t type, Error **errp,
const char *fmt, va_list va)
{
int ret = nbd_drop(client->ioc, client->optlen, errp);
client->optlen = 0;
if (!ret) {
ret = nbd_negotiate_send_rep_verr(client, type, errp, fmt, va);
}
return ret;
}
static int GCC_FMT_ATTR(4, 5)
nbd_opt_drop(NBDClient *client, uint32_t type, Error **errp,
const char *fmt, ...)
{
int ret;
va_list va;
va_start(va, fmt);
ret = nbd_opt_vdrop(client, type, errp, fmt, va);
va_end(va);
return ret;
}
static int GCC_FMT_ATTR(3, 4)
nbd_opt_invalid(NBDClient *client, Error **errp, const char *fmt, ...)
{
int ret;
va_list va;
va_start(va, fmt);
ret = nbd_opt_vdrop(client, NBD_REP_ERR_INVALID, errp, fmt, va);
va_end(va);
return ret;
}
/* Read size bytes from the unparsed payload of the current option.
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
static int nbd_opt_read(NBDClient *client, void *buffer, size_t size,
Error **errp)
{
if (size > client->optlen) {
return nbd_opt_invalid(client, errp,
"Inconsistent lengths in option %s",
nbd_opt_lookup(client->opt));
}
client->optlen -= size;
return qio_channel_read_all(client->ioc, buffer, size, errp) < 0 ? -EIO : 1;
}
/* Drop size bytes from the unparsed payload of the current option.
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
static int nbd_opt_skip(NBDClient *client, size_t size, Error **errp)
{
if (size > client->optlen) {
return nbd_opt_invalid(client, errp,
"Inconsistent lengths in option %s",
nbd_opt_lookup(client->opt));
}
client->optlen -= size;
return nbd_drop(client->ioc, size, errp) < 0 ? -EIO : 1;
}
/* nbd_opt_read_name
*
* Read a string with the format:
* uint32_t len (<= NBD_MAX_NAME_SIZE)
* len bytes string (not 0-terminated)
*
* @name should be enough to store NBD_MAX_NAME_SIZE+1.
* If @length is non-null, it will be set to the actual string length.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success.
*/
static int nbd_opt_read_name(NBDClient *client, char *name, uint32_t *length,
Error **errp)
{
int ret;
uint32_t len;
ret = nbd_opt_read(client, &len, sizeof(len), errp);
if (ret <= 0) {
return ret;
}
len = cpu_to_be32(len);
if (len > NBD_MAX_NAME_SIZE) {
return nbd_opt_invalid(client, errp,
"Invalid name length: %" PRIu32, len);
}
ret = nbd_opt_read(client, name, len, errp);
if (ret <= 0) {
return ret;
}
name[len] = '\0';
if (length) {
*length = len;
}
return 1;
}
/* Send a single NBD_REP_SERVER reply to NBD_OPT_LIST, including payload.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_send_rep_list(NBDClient *client, NBDExport *exp,
Error **errp)
{
size_t name_len, desc_len;
uint32_t len;
const char *name = exp->name ? exp->name : "";
const char *desc = exp->description ? exp->description : "";
QIOChannel *ioc = client->ioc;
int ret;
trace_nbd_negotiate_send_rep_list(name, desc);
name_len = strlen(name);
desc_len = strlen(desc);
len = name_len + desc_len + sizeof(len);
ret = nbd_negotiate_send_rep_len(client, NBD_REP_SERVER, len, errp);
if (ret < 0) {
return ret;
}
len = cpu_to_be32(name_len);
if (nbd_write(ioc, &len, sizeof(len), errp) < 0) {
error_prepend(errp, "write failed (name length): ");
return -EINVAL;
}
if (nbd_write(ioc, name, name_len, errp) < 0) {
error_prepend(errp, "write failed (name buffer): ");
return -EINVAL;
}
if (nbd_write(ioc, desc, desc_len, errp) < 0) {
error_prepend(errp, "write failed (description buffer): ");
return -EINVAL;
}
return 0;
}
/* Process the NBD_OPT_LIST command, with a potential series of replies.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_handle_list(NBDClient *client, Error **errp)
{
NBDExport *exp;
assert(client->opt == NBD_OPT_LIST);
/* For each export, send a NBD_REP_SERVER reply. */
QTAILQ_FOREACH(exp, &exports, next) {
if (nbd_negotiate_send_rep_list(client, exp, errp)) {
return -EINVAL;
}
}
/* Finish with a NBD_REP_ACK. */
return nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
}
static void nbd_check_meta_export(NBDClient *client)
{
client->export_meta.valid &= client->exp == client->export_meta.exp;
}
/* Send a reply to NBD_OPT_EXPORT_NAME.
* Return -errno on error, 0 on success. */
static int nbd_negotiate_handle_export_name(NBDClient *client,
uint16_t myflags, bool no_zeroes,
Error **errp)
{
char name[NBD_MAX_NAME_SIZE + 1];
char buf[NBD_REPLY_EXPORT_NAME_SIZE] = "";
size_t len;
int ret;
/* Client sends:
[20 .. xx] export name (length bytes)
Server replies:
[ 0 .. 7] size
[ 8 .. 9] export flags
[10 .. 133] reserved (0) [unless no_zeroes]
*/
trace_nbd_negotiate_handle_export_name();
if (client->optlen >= sizeof(name)) {
error_setg(errp, "Bad length received");
return -EINVAL;
}
if (nbd_read(client->ioc, name, client->optlen, "export name", errp) < 0) {
return -EIO;
}
name[client->optlen] = '\0';
client->optlen = 0;
trace_nbd_negotiate_handle_export_name_request(name);
client->exp = nbd_export_find(name);
if (!client->exp) {
error_setg(errp, "export not found");
return -EINVAL;
}
trace_nbd_negotiate_new_style_size_flags(client->exp->size,
client->exp->nbdflags | myflags);
stq_be_p(buf, client->exp->size);
stw_be_p(buf + 8, client->exp->nbdflags | myflags);
len = no_zeroes ? 10 : sizeof(buf);
ret = nbd_write(client->ioc, buf, len, errp);
if (ret < 0) {
error_prepend(errp, "write failed: ");
return ret;
}
QTAILQ_INSERT_TAIL(&client->exp->clients, client, next);
nbd_export_get(client->exp);
nbd_check_meta_export(client);
return 0;
}
/* Send a single NBD_REP_INFO, with a buffer @buf of @length bytes.
* The buffer does NOT include the info type prefix.
* Return -errno on error, 0 if ready to send more. */
static int nbd_negotiate_send_info(NBDClient *client,
uint16_t info, uint32_t length, void *buf,
Error **errp)
{
int rc;
trace_nbd_negotiate_send_info(info, nbd_info_lookup(info), length);
rc = nbd_negotiate_send_rep_len(client, NBD_REP_INFO,
sizeof(info) + length, errp);
if (rc < 0) {
return rc;
}
info = cpu_to_be16(info);
if (nbd_write(client->ioc, &info, sizeof(info), errp) < 0) {
return -EIO;
}
if (nbd_write(client->ioc, buf, length, errp) < 0) {
return -EIO;
}
return 0;
}
/* nbd_reject_length: Handle any unexpected payload.
* @fatal requests that we quit talking to the client, even if we are able
* to successfully send an error reply.
* Return:
* -errno transmission error occurred or @fatal was requested, errp is set
* 0 error message successfully sent to client, errp is not set
*/
static int nbd_reject_length(NBDClient *client, bool fatal, Error **errp)
{
int ret;
assert(client->optlen);
ret = nbd_opt_invalid(client, errp, "option '%s' has unexpected length",
nbd_opt_lookup(client->opt));
if (fatal && !ret) {
error_setg(errp, "option '%s' has unexpected length",
nbd_opt_lookup(client->opt));
return -EINVAL;
}
return ret;
}
/* Handle NBD_OPT_INFO and NBD_OPT_GO.
* Return -errno on error, 0 if ready for next option, and 1 to move
* into transmission phase. */
static int nbd_negotiate_handle_info(NBDClient *client, uint16_t myflags,
Error **errp)
{
int rc;
char name[NBD_MAX_NAME_SIZE + 1];
NBDExport *exp;
uint16_t requests;
uint16_t request;
uint32_t namelen;
bool sendname = false;
bool blocksize = false;
uint32_t sizes[3];
char buf[sizeof(uint64_t) + sizeof(uint16_t)];
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 06:05:21 +03:00
uint32_t check_align = 0;
/* Client sends:
4 bytes: L, name length (can be 0)
L bytes: export name
2 bytes: N, number of requests (can be 0)
N * 2 bytes: N requests
*/
rc = nbd_opt_read_name(client, name, &namelen, errp);
if (rc <= 0) {
return rc;
}
trace_nbd_negotiate_handle_export_name_request(name);
rc = nbd_opt_read(client, &requests, sizeof(requests), errp);
if (rc <= 0) {
return rc;
}
requests = be16_to_cpu(requests);
trace_nbd_negotiate_handle_info_requests(requests);
while (requests--) {
rc = nbd_opt_read(client, &request, sizeof(request), errp);
if (rc <= 0) {
return rc;
}
request = be16_to_cpu(request);
trace_nbd_negotiate_handle_info_request(request,
nbd_info_lookup(request));
/* We care about NBD_INFO_NAME and NBD_INFO_BLOCK_SIZE;
* everything else is either a request we don't know or
* something we send regardless of request */
switch (request) {
case NBD_INFO_NAME:
sendname = true;
break;
case NBD_INFO_BLOCK_SIZE:
blocksize = true;
break;
}
}
if (client->optlen) {
return nbd_reject_length(client, false, errp);
}
exp = nbd_export_find(name);
if (!exp) {
return nbd_negotiate_send_rep_err(client, NBD_REP_ERR_UNKNOWN,
errp, "export '%s' not present",
name);
}
/* Don't bother sending NBD_INFO_NAME unless client requested it */
if (sendname) {
rc = nbd_negotiate_send_info(client, NBD_INFO_NAME, namelen, name,
errp);
if (rc < 0) {
return rc;
}
}
/* Send NBD_INFO_DESCRIPTION only if available, regardless of
* client request */
if (exp->description) {
size_t len = strlen(exp->description);
rc = nbd_negotiate_send_info(client, NBD_INFO_DESCRIPTION,
len, exp->description, errp);
if (rc < 0) {
return rc;
}
}
/* Send NBD_INFO_BLOCK_SIZE always, but tweak the minimum size
* according to whether the client requested it, and according to
* whether this is OPT_INFO or OPT_GO. */
nbd/server: Advertise actual minimum block size Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their reply according to bdrv_block_status() boundaries. If the block device has a request_alignment smaller than 512, but we advertise a block alignment of 512 to the client, then this can result in the server reply violating client expectations by reporting a smaller region of the export than what the client is permitted to address (although this is less of an issue for qemu 4.0 clients, given recent client patches to overlook our non-compliance at EOF). Since it's always better to be strict in what we send, it is worth advertising the actual minimum block limit rather than blindly rounding it up to 512. Note that this patch is not foolproof - it is still possible to provoke non-compliant server behavior using: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file That is arguably a bug in the blkdebug driver (it should never pass back block status smaller than its alignment, even if it has to make multiple bdrv_get_status calls and determine the least-common-denominator status among the group to return). It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario (but again, an issue like that could be argued to be a bug in the block layer, or something where we need a flag to bdrv_block_status() to state whether the result must be aligned to the current layer's limits or can be subdivided for accuracy when chasing backing files). Anyways, as blkdebug is not normally used, and as this patch makes our server more interoperable with qemu 3.1 clients, it is worth applying now, even while we still work on a larger patch series for the 4.1 timeframe to have byte-accurate file lengths. Note that the iotests output changes - for 223 and 233, we can see the server's better granularity advertisement; and for 241, the three test cases have the following effects: - natural alignment: the server's smaller alignment is now advertised, and the hole reported at EOF is now the right result; we've gotten rid of the server's non-compliance - forced server alignment: the server still advertises 512 bytes, but still sends a mid-sector hole. This is still a server compliance bug, which needs to be fixed in the block layer in a later patch; output does not change because the client is already being tolerant of the non-compliance - forced client alignment: the server's smaller alignment means that the client now sees the server's status change mid-sector without any protocol violations, but the fact that the map shows an unaligned mid-sector hole is evidence of the block layer problems with aligned block status, to be fixed in a later patch Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to enhanced iotest 241 coverage]
2019-03-31 04:36:36 +03:00
/* minimum - 1 for back-compat, or actual if client will obey it. */
if (client->opt == NBD_OPT_INFO || blocksize) {
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 06:05:21 +03:00
check_align = sizes[0] = blk_get_request_alignment(exp->blk);
nbd/server: Advertise actual minimum block size Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their reply according to bdrv_block_status() boundaries. If the block device has a request_alignment smaller than 512, but we advertise a block alignment of 512 to the client, then this can result in the server reply violating client expectations by reporting a smaller region of the export than what the client is permitted to address (although this is less of an issue for qemu 4.0 clients, given recent client patches to overlook our non-compliance at EOF). Since it's always better to be strict in what we send, it is worth advertising the actual minimum block limit rather than blindly rounding it up to 512. Note that this patch is not foolproof - it is still possible to provoke non-compliant server behavior using: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file That is arguably a bug in the blkdebug driver (it should never pass back block status smaller than its alignment, even if it has to make multiple bdrv_get_status calls and determine the least-common-denominator status among the group to return). It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario (but again, an issue like that could be argued to be a bug in the block layer, or something where we need a flag to bdrv_block_status() to state whether the result must be aligned to the current layer's limits or can be subdivided for accuracy when chasing backing files). Anyways, as blkdebug is not normally used, and as this patch makes our server more interoperable with qemu 3.1 clients, it is worth applying now, even while we still work on a larger patch series for the 4.1 timeframe to have byte-accurate file lengths. Note that the iotests output changes - for 223 and 233, we can see the server's better granularity advertisement; and for 241, the three test cases have the following effects: - natural alignment: the server's smaller alignment is now advertised, and the hole reported at EOF is now the right result; we've gotten rid of the server's non-compliance - forced server alignment: the server still advertises 512 bytes, but still sends a mid-sector hole. This is still a server compliance bug, which needs to be fixed in the block layer in a later patch; output does not change because the client is already being tolerant of the non-compliance - forced client alignment: the server's smaller alignment means that the client now sees the server's status change mid-sector without any protocol violations, but the fact that the map shows an unaligned mid-sector hole is evidence of the block layer problems with aligned block status, to be fixed in a later patch Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to enhanced iotest 241 coverage]
2019-03-31 04:36:36 +03:00
} else {
sizes[0] = 1;
}
assert(sizes[0] <= NBD_MAX_BUFFER_SIZE);
/* preferred - Hard-code to 4096 for now.
* TODO: is blk_bs(blk)->bl.opt_transfer appropriate? */
nbd/server: Advertise actual minimum block size Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their reply according to bdrv_block_status() boundaries. If the block device has a request_alignment smaller than 512, but we advertise a block alignment of 512 to the client, then this can result in the server reply violating client expectations by reporting a smaller region of the export than what the client is permitted to address (although this is less of an issue for qemu 4.0 clients, given recent client patches to overlook our non-compliance at EOF). Since it's always better to be strict in what we send, it is worth advertising the actual minimum block limit rather than blindly rounding it up to 512. Note that this patch is not foolproof - it is still possible to provoke non-compliant server behavior using: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file That is arguably a bug in the blkdebug driver (it should never pass back block status smaller than its alignment, even if it has to make multiple bdrv_get_status calls and determine the least-common-denominator status among the group to return). It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario (but again, an issue like that could be argued to be a bug in the block layer, or something where we need a flag to bdrv_block_status() to state whether the result must be aligned to the current layer's limits or can be subdivided for accuracy when chasing backing files). Anyways, as blkdebug is not normally used, and as this patch makes our server more interoperable with qemu 3.1 clients, it is worth applying now, even while we still work on a larger patch series for the 4.1 timeframe to have byte-accurate file lengths. Note that the iotests output changes - for 223 and 233, we can see the server's better granularity advertisement; and for 241, the three test cases have the following effects: - natural alignment: the server's smaller alignment is now advertised, and the hole reported at EOF is now the right result; we've gotten rid of the server's non-compliance - forced server alignment: the server still advertises 512 bytes, but still sends a mid-sector hole. This is still a server compliance bug, which needs to be fixed in the block layer in a later patch; output does not change because the client is already being tolerant of the non-compliance - forced client alignment: the server's smaller alignment means that the client now sees the server's status change mid-sector without any protocol violations, but the fact that the map shows an unaligned mid-sector hole is evidence of the block layer problems with aligned block status, to be fixed in a later patch Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-7-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to enhanced iotest 241 coverage]
2019-03-31 04:36:36 +03:00
sizes[1] = MAX(4096, sizes[0]);
/* maximum - At most 32M, but smaller as appropriate. */
sizes[2] = MIN(blk_get_max_transfer(exp->blk), NBD_MAX_BUFFER_SIZE);
trace_nbd_negotiate_handle_info_block_size(sizes[0], sizes[1], sizes[2]);
sizes[0] = cpu_to_be32(sizes[0]);
sizes[1] = cpu_to_be32(sizes[1]);
sizes[2] = cpu_to_be32(sizes[2]);
rc = nbd_negotiate_send_info(client, NBD_INFO_BLOCK_SIZE,
sizeof(sizes), sizes, errp);
if (rc < 0) {
return rc;
}
/* Send NBD_INFO_EXPORT always */
trace_nbd_negotiate_new_style_size_flags(exp->size,
exp->nbdflags | myflags);
stq_be_p(buf, exp->size);
stw_be_p(buf + 8, exp->nbdflags | myflags);
rc = nbd_negotiate_send_info(client, NBD_INFO_EXPORT,
sizeof(buf), buf, errp);
if (rc < 0) {
return rc;
}
/*
* If the client is just asking for NBD_OPT_INFO, but forgot to
* request block sizes in a situation that would impact
* performance, then return an error. But for NBD_OPT_GO, we
* tolerate all clients, regardless of alignments.
*/
if (client->opt == NBD_OPT_INFO && !blocksize &&
blk_get_request_alignment(exp->blk) > 1) {
return nbd_negotiate_send_rep_err(client,
NBD_REP_ERR_BLOCK_SIZE_REQD,
errp,
"request NBD_INFO_BLOCK_SIZE to "
"use this export");
}
/* Final reply */
rc = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
if (rc < 0) {
return rc;
}
if (client->opt == NBD_OPT_GO) {
client->exp = exp;
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 06:05:21 +03:00
client->check_align = check_align;
QTAILQ_INSERT_TAIL(&client->exp->clients, client, next);
nbd_export_get(client->exp);
nbd_check_meta_export(client);
rc = 1;
}
return rc;
}
/* Handle NBD_OPT_STARTTLS. Return NULL to drop connection, or else the
* new channel for all further (now-encrypted) communication. */
static QIOChannel *nbd_negotiate_handle_starttls(NBDClient *client,
Error **errp)
{
QIOChannel *ioc;
QIOChannelTLS *tioc;
struct NBDTLSHandshakeData data = { 0 };
assert(client->opt == NBD_OPT_STARTTLS);
trace_nbd_negotiate_handle_starttls();
ioc = client->ioc;
if (nbd_negotiate_send_rep(client, NBD_REP_ACK, errp) < 0) {
return NULL;
}
tioc = qio_channel_tls_new_server(ioc,
client->tlscreds,
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 19:20:33 +03:00
client->tlsauthz,
errp);
if (!tioc) {
return NULL;
}
qio_channel_set_name(QIO_CHANNEL(tioc), "nbd-server-tls");
trace_nbd_negotiate_handle_starttls_handshake();
data.loop = g_main_loop_new(g_main_context_default(), FALSE);
qio_channel_tls_handshake(tioc,
nbd_tls_handshake,
&data,
NULL,
NULL);
if (!data.complete) {
g_main_loop_run(data.loop);
}
g_main_loop_unref(data.loop);
if (data.error) {
object_unref(OBJECT(tioc));
error_propagate(errp, data.error);
return NULL;
}
return QIO_CHANNEL(tioc);
}
/* nbd_negotiate_send_meta_context
*
* Send one chunk of reply to NBD_OPT_{LIST,SET}_META_CONTEXT
*
* For NBD_OPT_LIST_META_CONTEXT @context_id is ignored, 0 is used instead.
*/
static int nbd_negotiate_send_meta_context(NBDClient *client,
const char *context,
uint32_t context_id,
Error **errp)
{
NBDOptionReplyMetaContext opt;
struct iovec iov[] = {
{.iov_base = &opt, .iov_len = sizeof(opt)},
{.iov_base = (void *)context, .iov_len = strlen(context)}
};
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
context_id = 0;
}
trace_nbd_negotiate_meta_query_reply(context, context_id);
set_be_option_rep(&opt.h, client->opt, NBD_REP_META_CONTEXT,
sizeof(opt) - sizeof(opt.h) + iov[1].iov_len);
stl_be_p(&opt.context_id, context_id);
return qio_channel_writev_all(client->ioc, iov, 2, errp) < 0 ? -EIO : 0;
}
/* Read strlen(@pattern) bytes, and set @match to true if they match @pattern.
* @match is never set to false.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success.
*
* Note: return code = 1 doesn't mean that we've read exactly @pattern.
* It only means that there are no errors.
*/
static int nbd_meta_pattern(NBDClient *client, const char *pattern, bool *match,
Error **errp)
{
int ret;
char *query;
size_t len = strlen(pattern);
assert(len);
query = g_malloc(len);
ret = nbd_opt_read(client, query, len, errp);
if (ret <= 0) {
g_free(query);
return ret;
}
if (strncmp(query, pattern, len) == 0) {
trace_nbd_negotiate_meta_query_parse(pattern);
*match = true;
} else {
trace_nbd_negotiate_meta_query_skip("pattern not matched");
}
g_free(query);
return 1;
}
/*
* Read @len bytes, and set @match to true if they match @pattern, or if @len
* is 0 and the client is performing _LIST_. @match is never set to false.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success.
*
* Note: return code = 1 doesn't mean that we've read exactly @pattern.
* It only means that there are no errors.
*/
static int nbd_meta_empty_or_pattern(NBDClient *client, const char *pattern,
uint32_t len, bool *match, Error **errp)
{
if (len == 0) {
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
*match = true;
}
trace_nbd_negotiate_meta_query_parse("empty");
return 1;
}
if (len != strlen(pattern)) {
trace_nbd_negotiate_meta_query_skip("different lengths");
return nbd_opt_skip(client, len, errp);
}
return nbd_meta_pattern(client, pattern, match, errp);
}
/* nbd_meta_base_query
*
* Handle queries to 'base' namespace. For now, only the base:allocation
* context is available. 'len' is the amount of text remaining to be read from
* the current name, after the 'base:' portion has been stripped.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success.
*/
static int nbd_meta_base_query(NBDClient *client, NBDExportMetaContexts *meta,
uint32_t len, Error **errp)
{
return nbd_meta_empty_or_pattern(client, "allocation", len,
&meta->base_allocation, errp);
}
/* nbd_meta_bitmap_query
*
* Handle query to 'qemu:' namespace.
* @len is the amount of text remaining to be read from the current name, after
* the 'qemu:' portion has been stripped.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
static int nbd_meta_qemu_query(NBDClient *client, NBDExportMetaContexts *meta,
uint32_t len, Error **errp)
{
bool dirty_bitmap = false;
size_t dirty_bitmap_len = strlen("dirty-bitmap:");
int ret;
if (!meta->exp->export_bitmap) {
trace_nbd_negotiate_meta_query_skip("no dirty-bitmap exported");
return nbd_opt_skip(client, len, errp);
}
if (len == 0) {
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
meta->bitmap = true;
}
trace_nbd_negotiate_meta_query_parse("empty");
return 1;
}
if (len < dirty_bitmap_len) {
trace_nbd_negotiate_meta_query_skip("not dirty-bitmap:");
return nbd_opt_skip(client, len, errp);
}
len -= dirty_bitmap_len;
ret = nbd_meta_pattern(client, "dirty-bitmap:", &dirty_bitmap, errp);
if (ret <= 0) {
return ret;
}
if (!dirty_bitmap) {
trace_nbd_negotiate_meta_query_skip("not dirty-bitmap:");
return nbd_opt_skip(client, len, errp);
}
trace_nbd_negotiate_meta_query_parse("dirty-bitmap:");
return nbd_meta_empty_or_pattern(
client, meta->exp->export_bitmap_context +
strlen("qemu:dirty_bitmap:"), len, &meta->bitmap, errp);
}
/* nbd_negotiate_meta_query
*
* Parse namespace name and call corresponding function to parse body of the
* query.
*
* The only supported namespace now is 'base'.
*
* The function aims not wasting time and memory to read long unknown namespace
* names.
*
* Return -errno on I/O error, 0 if option was completely handled by
* sending a reply about inconsistent lengths, or 1 on success. */
static int nbd_negotiate_meta_query(NBDClient *client,
NBDExportMetaContexts *meta, Error **errp)
{
/*
* Both 'qemu' and 'base' namespaces have length = 5 including a
* colon. If another length namespace is later introduced, this
* should certainly be refactored.
*/
int ret;
size_t ns_len = 5;
char ns[5];
uint32_t len;
ret = nbd_opt_read(client, &len, sizeof(len), errp);
if (ret <= 0) {
return ret;
}
len = cpu_to_be32(len);
if (len < ns_len) {
trace_nbd_negotiate_meta_query_skip("length too short");
return nbd_opt_skip(client, len, errp);
}
len -= ns_len;
ret = nbd_opt_read(client, ns, ns_len, errp);
if (ret <= 0) {
return ret;
}
if (!strncmp(ns, "base:", ns_len)) {
trace_nbd_negotiate_meta_query_parse("base:");
return nbd_meta_base_query(client, meta, len, errp);
} else if (!strncmp(ns, "qemu:", ns_len)) {
trace_nbd_negotiate_meta_query_parse("qemu:");
return nbd_meta_qemu_query(client, meta, len, errp);
}
trace_nbd_negotiate_meta_query_skip("unknown namespace");
return nbd_opt_skip(client, len, errp);
}
/* nbd_negotiate_meta_queries
* Handle NBD_OPT_LIST_META_CONTEXT and NBD_OPT_SET_META_CONTEXT
*
* Return -errno on I/O error, or 0 if option was completely handled. */
static int nbd_negotiate_meta_queries(NBDClient *client,
NBDExportMetaContexts *meta, Error **errp)
{
int ret;
char export_name[NBD_MAX_NAME_SIZE + 1];
NBDExportMetaContexts local_meta;
uint32_t nb_queries;
int i;
if (!client->structured_reply) {
return nbd_opt_invalid(client, errp,
"request option '%s' when structured reply "
"is not negotiated",
nbd_opt_lookup(client->opt));
}
if (client->opt == NBD_OPT_LIST_META_CONTEXT) {
/* Only change the caller's meta on SET. */
meta = &local_meta;
}
memset(meta, 0, sizeof(*meta));
ret = nbd_opt_read_name(client, export_name, NULL, errp);
if (ret <= 0) {
return ret;
}
meta->exp = nbd_export_find(export_name);
if (meta->exp == NULL) {
return nbd_opt_drop(client, NBD_REP_ERR_UNKNOWN, errp,
"export '%s' not present", export_name);
}
ret = nbd_opt_read(client, &nb_queries, sizeof(nb_queries), errp);
if (ret <= 0) {
return ret;
}
nb_queries = cpu_to_be32(nb_queries);
trace_nbd_negotiate_meta_context(nbd_opt_lookup(client->opt),
export_name, nb_queries);
if (client->opt == NBD_OPT_LIST_META_CONTEXT && !nb_queries) {
/* enable all known contexts */
meta->base_allocation = true;
meta->bitmap = !!meta->exp->export_bitmap;
} else {
for (i = 0; i < nb_queries; ++i) {
ret = nbd_negotiate_meta_query(client, meta, errp);
if (ret <= 0) {
return ret;
}
}
}
if (meta->base_allocation) {
ret = nbd_negotiate_send_meta_context(client, "base:allocation",
NBD_META_ID_BASE_ALLOCATION,
errp);
if (ret < 0) {
return ret;
}
}
if (meta->bitmap) {
ret = nbd_negotiate_send_meta_context(client,
meta->exp->export_bitmap_context,
NBD_META_ID_DIRTY_BITMAP,
errp);
if (ret < 0) {
return ret;
}
}
ret = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
if (ret == 0) {
meta->valid = true;
}
return ret;
}
/* nbd_negotiate_options
* Process all NBD_OPT_* client option commands, during fixed newstyle
* negotiation.
* Return:
* -errno on error, errp is set
* 0 on successful negotiation, errp is not set
* 1 if client sent NBD_OPT_ABORT, i.e. on valid disconnect,
* errp is not set
*/
static int nbd_negotiate_options(NBDClient *client, uint16_t myflags,
Error **errp)
{
uint32_t flags;
bool fixedNewstyle = false;
bool no_zeroes = false;
/* Client sends:
[ 0 .. 3] client flags
Then we loop until NBD_OPT_EXPORT_NAME or NBD_OPT_GO:
[ 0 .. 7] NBD_OPTS_MAGIC
[ 8 .. 11] NBD option
[12 .. 15] Data length
... Rest of request
[ 0 .. 7] NBD_OPTS_MAGIC
[ 8 .. 11] Second NBD option
[12 .. 15] Data length
... Rest of request
*/
if (nbd_read32(client->ioc, &flags, "flags", errp) < 0) {
return -EIO;
}
trace_nbd_negotiate_options_flags(flags);
if (flags & NBD_FLAG_C_FIXED_NEWSTYLE) {
fixedNewstyle = true;
flags &= ~NBD_FLAG_C_FIXED_NEWSTYLE;
}
if (flags & NBD_FLAG_C_NO_ZEROES) {
no_zeroes = true;
flags &= ~NBD_FLAG_C_NO_ZEROES;
}
if (flags != 0) {
error_setg(errp, "Unknown client flags 0x%" PRIx32 " received", flags);
return -EINVAL;
}
while (1) {
int ret;
uint32_t option, length;
uint64_t magic;
if (nbd_read64(client->ioc, &magic, "opts magic", errp) < 0) {
return -EINVAL;
}
trace_nbd_negotiate_options_check_magic(magic);
if (magic != NBD_OPTS_MAGIC) {
error_setg(errp, "Bad magic received");
return -EINVAL;
}
if (nbd_read32(client->ioc, &option, "option", errp) < 0) {
return -EINVAL;
}
client->opt = option;
if (nbd_read32(client->ioc, &length, "option length", errp) < 0) {
return -EINVAL;
}
assert(!client->optlen);
client->optlen = length;
nbd/server: CVE-2017-15119 Reject options larger than 32M The NBD spec gives us permission to abruptly disconnect on clients that send outrageously large option requests, rather than having to spend the time reading to the end of the option. No real option request requires that much data anyways; and meanwhile, we already have the practice of abruptly dropping the connection on any client that sends NBD_CMD_WRITE with a payload larger than 32M. For comparison, nbdkit drops the connection on any request with more than 4096 bytes; however, that limit is probably too low (as the NBD spec states an export name can theoretically be up to 4096 bytes, which means a valid NBD_OPT_INFO could be even longer) - even if qemu doesn't permit exports longer than 256 bytes. It could be argued that a malicious client trying to get us to read nearly 4G of data on a bad request is a form of denial of service. In particular, if the server requires TLS, but a client that does not know the TLS credentials sends any option (other than NBD_OPT_STARTTLS or NBD_OPT_EXPORT_NAME) with a stated payload of nearly 4G, then the server was keeping the connection alive trying to read all the payload, tying up resources that it would rather be spending on a client that can get past the TLS handshake. Hence, this warranted a CVE. Present since at least 2.5 when handling known options, and made worse in 2.6 when fixing support for NBD_FLAG_C_FIXED_NEWSTYLE to handle unknown options. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com>
2017-11-23 01:25:16 +03:00
if (length > NBD_MAX_BUFFER_SIZE) {
error_setg(errp, "len (%" PRIu32" ) is larger than max len (%u)",
length, NBD_MAX_BUFFER_SIZE);
return -EINVAL;
}
trace_nbd_negotiate_options_check_option(option,
nbd_opt_lookup(option));
if (client->tlscreds &&
client->ioc == (QIOChannel *)client->sioc) {
QIOChannel *tioc;
if (!fixedNewstyle) {
error_setg(errp, "Unsupported option 0x%" PRIx32, option);
return -EINVAL;
}
switch (option) {
case NBD_OPT_STARTTLS:
if (length) {
/* Unconditionally drop the connection if the client
* can't start a TLS negotiation correctly */
return nbd_reject_length(client, true, errp);
}
tioc = nbd_negotiate_handle_starttls(client, errp);
if (!tioc) {
return -EIO;
}
ret = 0;
object_unref(OBJECT(client->ioc));
client->ioc = QIO_CHANNEL(tioc);
break;
case NBD_OPT_EXPORT_NAME:
/* No way to return an error to client, so drop connection */
error_setg(errp, "Option 0x%x not permitted before TLS",
option);
return -EINVAL;
default:
/* Let the client keep trying, unless they asked to
* quit. Always try to give an error back to the
* client; but when replying to OPT_ABORT, be aware
* that the client may hang up before receiving the
* error, in which case we are fine ignoring the
* resulting EPIPE. */
ret = nbd_opt_drop(client, NBD_REP_ERR_TLS_REQD,
option == NBD_OPT_ABORT ? NULL : errp,
"Option 0x%" PRIx32
" not permitted before TLS", option);
if (option == NBD_OPT_ABORT) {
return 1;
}
break;
}
} else if (fixedNewstyle) {
switch (option) {
case NBD_OPT_LIST:
if (length) {
ret = nbd_reject_length(client, false, errp);
} else {
ret = nbd_negotiate_handle_list(client, errp);
}
break;
case NBD_OPT_ABORT:
/* NBD spec says we must try to reply before
* disconnecting, but that we must also tolerate
* guests that don't wait for our reply. */
nbd_negotiate_send_rep(client, NBD_REP_ACK, NULL);
return 1;
case NBD_OPT_EXPORT_NAME:
return nbd_negotiate_handle_export_name(client,
myflags, no_zeroes,
errp);
case NBD_OPT_INFO:
case NBD_OPT_GO:
ret = nbd_negotiate_handle_info(client, myflags, errp);
if (ret == 1) {
assert(option == NBD_OPT_GO);
return 0;
}
break;
case NBD_OPT_STARTTLS:
if (length) {
ret = nbd_reject_length(client, false, errp);
} else if (client->tlscreds) {
ret = nbd_negotiate_send_rep_err(client,
NBD_REP_ERR_INVALID, errp,
"TLS already enabled");
} else {
ret = nbd_negotiate_send_rep_err(client,
NBD_REP_ERR_POLICY, errp,
"TLS not configured");
}
break;
case NBD_OPT_STRUCTURED_REPLY:
if (length) {
ret = nbd_reject_length(client, false, errp);
} else if (client->structured_reply) {
ret = nbd_negotiate_send_rep_err(
client, NBD_REP_ERR_INVALID, errp,
"structured reply already negotiated");
} else {
ret = nbd_negotiate_send_rep(client, NBD_REP_ACK, errp);
client->structured_reply = true;
myflags |= NBD_FLAG_SEND_DF;
}
break;
case NBD_OPT_LIST_META_CONTEXT:
case NBD_OPT_SET_META_CONTEXT:
ret = nbd_negotiate_meta_queries(client, &client->export_meta,
errp);
break;
default:
ret = nbd_opt_drop(client, NBD_REP_ERR_UNSUP, errp,
"Unsupported option %" PRIu32 " (%s)",
option, nbd_opt_lookup(option));
break;
}
} else {
/*
* If broken new-style we should drop the connection
* for anything except NBD_OPT_EXPORT_NAME
*/
switch (option) {
case NBD_OPT_EXPORT_NAME:
return nbd_negotiate_handle_export_name(client,
myflags, no_zeroes,
errp);
default:
error_setg(errp, "Unsupported option %" PRIu32 " (%s)",
option, nbd_opt_lookup(option));
return -EINVAL;
}
}
if (ret < 0) {
return ret;
}
}
}
/* nbd_negotiate
* Return:
* -errno on error, errp is set
* 0 on successful negotiation, errp is not set
* 1 if client sent NBD_OPT_ABORT, i.e. on valid disconnect,
* errp is not set
*/
static coroutine_fn int nbd_negotiate(NBDClient *client, Error **errp)
{
char buf[NBD_OLDSTYLE_NEGOTIATE_SIZE] = "";
int ret;
const uint16_t myflags = (NBD_FLAG_HAS_FLAGS | NBD_FLAG_SEND_TRIM |
NBD_FLAG_SEND_FLUSH | NBD_FLAG_SEND_FUA |
NBD_FLAG_SEND_WRITE_ZEROES | NBD_FLAG_SEND_CACHE);
/* Old style negotiation header, no room for options
[ 0 .. 7] passwd ("NBDMAGIC")
[ 8 .. 15] magic (NBD_CLIENT_MAGIC)
[16 .. 23] size
[24 .. 27] export flags (zero-extended)
[28 .. 151] reserved (0)
New style negotiation header, client can send options
[ 0 .. 7] passwd ("NBDMAGIC")
[ 8 .. 15] magic (NBD_OPTS_MAGIC)
[16 .. 17] server flags (0)
....options sent, ending in NBD_OPT_EXPORT_NAME or NBD_OPT_GO....
*/
qio_channel_set_blocking(client->ioc, false, NULL);
trace_nbd_negotiate_begin();
memcpy(buf, "NBDMAGIC", 8);
stq_be_p(buf + 8, NBD_OPTS_MAGIC);
stw_be_p(buf + 16, NBD_FLAG_FIXED_NEWSTYLE | NBD_FLAG_NO_ZEROES);
if (nbd_write(client->ioc, buf, 18, errp) < 0) {
error_prepend(errp, "write failed: ");
return -EINVAL;
}
ret = nbd_negotiate_options(client, myflags, errp);
if (ret != 0) {
if (ret < 0) {
error_prepend(errp, "option negotiation failed: ");
}
return ret;
}
assert(!client->optlen);
trace_nbd_negotiate_success();
return 0;
}
static int nbd_receive_request(QIOChannel *ioc, NBDRequest *request,
Error **errp)
{
uint8_t buf[NBD_REQUEST_SIZE];
uint32_t magic;
int ret;
ret = nbd_read(ioc, buf, sizeof(buf), "request", errp);
if (ret < 0) {
return ret;
}
/* Request
[ 0 .. 3] magic (NBD_REQUEST_MAGIC)
[ 4 .. 5] flags (NBD_CMD_FLAG_FUA, ...)
[ 6 .. 7] type (NBD_CMD_READ, ...)
[ 8 .. 15] handle
[16 .. 23] from
[24 .. 27] len
*/
magic = ldl_be_p(buf);
request->flags = lduw_be_p(buf + 4);
request->type = lduw_be_p(buf + 6);
request->handle = ldq_be_p(buf + 8);
request->from = ldq_be_p(buf + 16);
request->len = ldl_be_p(buf + 24);
trace_nbd_receive_request(magic, request->flags, request->type,
request->from, request->len);
if (magic != NBD_REQUEST_MAGIC) {
error_setg(errp, "invalid magic (got 0x%" PRIx32 ")", magic);
return -EINVAL;
}
return 0;
}
#define MAX_NBD_REQUESTS 16
void nbd_client_get(NBDClient *client)
{
client->refcount++;
}
void nbd_client_put(NBDClient *client)
{
if (--client->refcount == 0) {
/* The last reference should be dropped by client->close,
* which is called by client_close.
*/
assert(client->closing);
qio_channel_detach_aio_context(client->ioc);
object_unref(OBJECT(client->sioc));
object_unref(OBJECT(client->ioc));
if (client->tlscreds) {
object_unref(OBJECT(client->tlscreds));
}
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 19:20:33 +03:00
g_free(client->tlsauthz);
if (client->exp) {
QTAILQ_REMOVE(&client->exp->clients, client, next);
nbd_export_put(client->exp);
}
g_free(client);
}
}
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
static void client_close(NBDClient *client, bool negotiated)
{
if (client->closing) {
return;
}
client->closing = true;
/* Force requests to finish. They will drop their own references,
* then we'll close the socket and free the NBDClient.
*/
qio_channel_shutdown(client->ioc, QIO_CHANNEL_SHUTDOWN_BOTH,
NULL);
/* Also tell the client, so that they release their reference. */
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
if (client->close_fn) {
client->close_fn(client, negotiated);
}
}
static NBDRequestData *nbd_request_get(NBDClient *client)
{
NBDRequestData *req;
assert(client->nb_requests <= MAX_NBD_REQUESTS - 1);
client->nb_requests++;
req = g_new0(NBDRequestData, 1);
nbd_client_get(client);
req->client = client;
return req;
}
static void nbd_request_put(NBDRequestData *req)
{
NBDClient *client = req->client;
if (req->data) {
qemu_vfree(req->data);
}
g_free(req);
client->nb_requests--;
nbd_client_receive_next_request(client);
nbd_client_put(client);
}
static void blk_aio_attached(AioContext *ctx, void *opaque)
{
NBDExport *exp = opaque;
NBDClient *client;
trace_nbd_blk_aio_attached(exp->name, ctx);
exp->ctx = ctx;
QTAILQ_FOREACH(client, &exp->clients, next) {
qio_channel_attach_aio_context(client->ioc, ctx);
if (client->recv_coroutine) {
aio_co_schedule(ctx, client->recv_coroutine);
}
if (client->send_coroutine) {
aio_co_schedule(ctx, client->send_coroutine);
}
}
}
static void blk_aio_detach(void *opaque)
{
NBDExport *exp = opaque;
NBDClient *client;
trace_nbd_blk_aio_detach(exp->name, exp->ctx);
QTAILQ_FOREACH(client, &exp->clients, next) {
qio_channel_detach_aio_context(client->ioc);
}
exp->ctx = NULL;
}
static void nbd_eject_notifier(Notifier *n, void *data)
{
NBDExport *exp = container_of(n, NBDExport, eject_notifier);
nbd_export_close(exp);
}
NBDExport *nbd_export_new(BlockDriverState *bs, uint64_t dev_offset,
uint64_t size, const char *name, const char *desc,
const char *bitmap, uint16_t nbdflags,
void (*close)(NBDExport *), bool writethrough,
BlockBackend *on_eject_blk, Error **errp)
{
AioContext *ctx;
BlockBackend *blk;
NBDExport *exp = g_new0(NBDExport, 1);
uint64_t perm;
int ret;
/*
* NBD exports are used for non-shared storage migration. Make sure
* that BDRV_O_INACTIVE is cleared and the image is ready for write
* access since the export could be available before migration handover.
*/
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 22:47:16 +03:00
assert(name);
ctx = bdrv_get_aio_context(bs);
aio_context_acquire(ctx);
bdrv_invalidate_cache(bs, NULL);
aio_context_release(ctx);
/* Don't allow resize while the NBD server is running, otherwise we don't
* care what happens with the node. */
perm = BLK_PERM_CONSISTENT_READ;
if ((nbdflags & NBD_FLAG_READ_ONLY) == 0) {
perm |= BLK_PERM_WRITE;
}
blk = blk_new(bdrv_get_aio_context(bs), perm,
BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE_UNCHANGED |
BLK_PERM_WRITE | BLK_PERM_GRAPH_MOD);
ret = blk_insert_bs(blk, bs, errp);
if (ret < 0) {
goto fail;
}
blk_set_enable_write_cache(blk, !writethrough);
blk_set_allow_aio_context_change(blk, true);
exp->refcount = 1;
QTAILQ_INIT(&exp->clients);
exp->blk = blk;
assert(dev_offset <= INT64_MAX);
exp->dev_offset = dev_offset;
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 22:47:16 +03:00
exp->name = g_strdup(name);
exp->description = g_strdup(desc);
exp->nbdflags = nbdflags;
assert(size <= INT64_MAX - dev_offset);
exp->size = QEMU_ALIGN_DOWN(size, BDRV_SECTOR_SIZE);
if (bitmap) {
BdrvDirtyBitmap *bm = NULL;
while (true) {
bm = bdrv_find_dirty_bitmap(bs, bitmap);
if (bm != NULL || bs->backing == NULL) {
break;
}
bs = bs->backing->bs;
}
if (bm == NULL) {
error_setg(errp, "Bitmap '%s' is not found", bitmap);
goto fail;
}
if (bdrv_dirty_bitmap_check(bm, BDRV_BITMAP_ALLOW_RO, errp)) {
goto fail;
}
if ((nbdflags & NBD_FLAG_READ_ONLY) && bdrv_is_writable(bs) &&
bdrv_dirty_bitmap_enabled(bm)) {
error_setg(errp,
"Enabled bitmap '%s' incompatible with readonly export",
bitmap);
goto fail;
}
bdrv_dirty_bitmap_set_busy(bm, true);
exp->export_bitmap = bm;
exp->export_bitmap_context = g_strdup_printf("qemu:dirty-bitmap:%s",
bitmap);
}
exp->close = close;
exp->ctx = blk_get_aio_context(blk);
blk_add_aio_context_notifier(blk, blk_aio_attached, blk_aio_detach, exp);
if (on_eject_blk) {
blk_ref(on_eject_blk);
exp->eject_notifier_blk = on_eject_blk;
exp->eject_notifier.notify = nbd_eject_notifier;
blk_add_remove_bs_notifier(on_eject_blk, &exp->eject_notifier);
}
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 22:47:16 +03:00
QTAILQ_INSERT_TAIL(&exports, exp, next);
nbd_export_get(exp);
return exp;
fail:
blk_unref(blk);
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 22:47:16 +03:00
g_free(exp->name);
g_free(exp->description);
g_free(exp);
return NULL;
}
NBDExport *nbd_export_find(const char *name)
{
NBDExport *exp;
QTAILQ_FOREACH(exp, &exports, next) {
if (strcmp(name, exp->name) == 0) {
return exp;
}
}
return NULL;
}
void nbd_export_close(NBDExport *exp)
{
NBDClient *client, *next;
nbd_export_get(exp);
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 22:47:16 +03:00
/*
* TODO: Should we expand QMP NbdServerRemoveNode enum to allow a
* close mode that stops advertising the export to new clients but
* still permits existing clients to run to completion? Because of
* that possibility, nbd_export_close() can be called more than
* once on an export.
*/
QTAILQ_FOREACH_SAFE(client, &exp->clients, next, next) {
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
client_close(client, true);
}
nbd: Merge nbd_export_set_name into nbd_export_new The existing NBD code had a weird split where nbd_export_new() created an export but did not add it to the list of exported names until a later nbd_export_set_name() came along and grabbed a second reference on the object; later, the first call to nbd_export_close() drops the second reference while removing the export from the list. This is in part because the QAPI NbdServerRemoveNode enum documents the possibility of adding a mode where we could do a soft disconnect: preventing new clients, but waiting for existing clients to gracefully quit, based on the mode used when calling nbd_export_close(). But in spite of all that, note that we never change the name of an NBD export while it is exposed, which means it is easier to just inline the process of setting the name as part of creating the export. Inline the contents of nbd_export_set_name() and nbd_export_set_description() into the two points in an export lifecycle where they matter, then adjust both callers to pass the name up front. Note that for creation, all callers pass a non-NULL name, (passing NULL at creation was for old style servers, but we removed support for that in commit 7f7dfe2a), so we can add an assert and do things unconditionally; but for cleanup, because of the dual nature of nbd_export_close(), we still have to be careful to avoid use-after-free. Along the way, add a comment reminding ourselves of the potential of adding a middle mode disconnect. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190111194720.15671-5-eblake@redhat.com>
2019-01-11 22:47:16 +03:00
if (exp->name) {
nbd_export_put(exp);
g_free(exp->name);
exp->name = NULL;
QTAILQ_REMOVE(&exports, exp, next);
}
g_free(exp->description);
exp->description = NULL;
nbd_export_put(exp);
}
void nbd_export_remove(NBDExport *exp, NbdServerRemoveMode mode, Error **errp)
{
if (mode == NBD_SERVER_REMOVE_MODE_HARD || QTAILQ_EMPTY(&exp->clients)) {
nbd_export_close(exp);
return;
}
assert(mode == NBD_SERVER_REMOVE_MODE_SAFE);
error_setg(errp, "export '%s' still in use", exp->name);
error_append_hint(errp, "Use mode='hard' to force client disconnect\n");
}
void nbd_export_get(NBDExport *exp)
{
assert(exp->refcount > 0);
exp->refcount++;
}
void nbd_export_put(NBDExport *exp)
{
assert(exp->refcount > 0);
if (exp->refcount == 1) {
nbd_export_close(exp);
}
/* nbd_export_close() may theoretically reduce refcount to 0. It may happen
* if someone calls nbd_export_put() on named export not through
* nbd_export_set_name() when refcount is 1. So, let's assert that
* it is > 0.
*/
assert(exp->refcount > 0);
if (--exp->refcount == 0) {
assert(exp->name == NULL);
assert(exp->description == NULL);
if (exp->close) {
exp->close(exp);
}
if (exp->blk) {
if (exp->eject_notifier_blk) {
notifier_remove(&exp->eject_notifier);
blk_unref(exp->eject_notifier_blk);
}
blk_remove_aio_context_notifier(exp->blk, blk_aio_attached,
blk_aio_detach, exp);
blk_unref(exp->blk);
exp->blk = NULL;
}
if (exp->export_bitmap) {
bdrv_dirty_bitmap_set_busy(exp->export_bitmap, false);
g_free(exp->export_bitmap_context);
}
g_free(exp);
}
}
BlockBackend *nbd_export_get_blockdev(NBDExport *exp)
{
return exp->blk;
}
void nbd_export_close_all(void)
{
NBDExport *exp, *next;
QTAILQ_FOREACH_SAFE(exp, &exports, next, next) {
nbd_export_close(exp);
}
}
static int coroutine_fn nbd_co_send_iov(NBDClient *client, struct iovec *iov,
unsigned niov, Error **errp)
{
int ret;
g_assert(qemu_in_coroutine());
qemu_co_mutex_lock(&client->send_lock);
client->send_coroutine = qemu_coroutine_self();
ret = qio_channel_writev_all(client->ioc, iov, niov, errp) < 0 ? -EIO : 0;
client->send_coroutine = NULL;
qemu_co_mutex_unlock(&client->send_lock);
return ret;
}
static inline void set_be_simple_reply(NBDSimpleReply *reply, uint64_t error,
uint64_t handle)
{
stl_be_p(&reply->magic, NBD_SIMPLE_REPLY_MAGIC);
stl_be_p(&reply->error, error);
stq_be_p(&reply->handle, handle);
}
static int nbd_co_send_simple_reply(NBDClient *client,
uint64_t handle,
uint32_t error,
void *data,
size_t len,
Error **errp)
{
NBDSimpleReply reply;
int nbd_err = system_errno_to_nbd_errno(error);
struct iovec iov[] = {
{.iov_base = &reply, .iov_len = sizeof(reply)},
{.iov_base = data, .iov_len = len}
};
trace_nbd_co_send_simple_reply(handle, nbd_err, nbd_err_lookup(nbd_err),
len);
set_be_simple_reply(&reply, nbd_err, handle);
return nbd_co_send_iov(client, iov, len ? 2 : 1, errp);
}
static inline void set_be_chunk(NBDStructuredReplyChunk *chunk, uint16_t flags,
uint16_t type, uint64_t handle, uint32_t length)
{
stl_be_p(&chunk->magic, NBD_STRUCTURED_REPLY_MAGIC);
stw_be_p(&chunk->flags, flags);
stw_be_p(&chunk->type, type);
stq_be_p(&chunk->handle, handle);
stl_be_p(&chunk->length, length);
}
static int coroutine_fn nbd_co_send_structured_done(NBDClient *client,
uint64_t handle,
Error **errp)
{
NBDStructuredReplyChunk chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
};
trace_nbd_co_send_structured_done(handle);
set_be_chunk(&chunk, NBD_REPLY_FLAG_DONE, NBD_REPLY_TYPE_NONE, handle, 0);
return nbd_co_send_iov(client, iov, 1, errp);
}
static int coroutine_fn nbd_co_send_structured_read(NBDClient *client,
uint64_t handle,
uint64_t offset,
void *data,
size_t size,
bool final,
Error **errp)
{
NBDStructuredReadData chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
{.iov_base = data, .iov_len = size}
};
assert(size);
trace_nbd_co_send_structured_read(handle, offset, data, size);
set_be_chunk(&chunk.h, final ? NBD_REPLY_FLAG_DONE : 0,
NBD_REPLY_TYPE_OFFSET_DATA, handle,
sizeof(chunk) - sizeof(chunk.h) + size);
stq_be_p(&chunk.offset, offset);
return nbd_co_send_iov(client, iov, 2, errp);
}
static int coroutine_fn nbd_co_send_structured_error(NBDClient *client,
uint64_t handle,
uint32_t error,
const char *msg,
Error **errp)
{
NBDStructuredError chunk;
int nbd_err = system_errno_to_nbd_errno(error);
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
{.iov_base = (char *)msg, .iov_len = msg ? strlen(msg) : 0},
};
assert(nbd_err);
trace_nbd_co_send_structured_error(handle, nbd_err,
nbd_err_lookup(nbd_err), msg ? msg : "");
set_be_chunk(&chunk.h, NBD_REPLY_FLAG_DONE, NBD_REPLY_TYPE_ERROR, handle,
sizeof(chunk) - sizeof(chunk.h) + iov[1].iov_len);
stl_be_p(&chunk.error, nbd_err);
stw_be_p(&chunk.message_length, iov[1].iov_len);
return nbd_co_send_iov(client, iov, 1 + !!iov[1].iov_len, errp);
}
/* Do a sparse read and send the structured reply to the client.
* Returns -errno if sending fails. bdrv_block_status_above() failure is
* reported to the client, at which point this function succeeds.
*/
static int coroutine_fn nbd_co_send_sparse_read(NBDClient *client,
uint64_t handle,
uint64_t offset,
uint8_t *data,
size_t size,
Error **errp)
{
int ret = 0;
NBDExport *exp = client->exp;
size_t progress = 0;
while (progress < size) {
int64_t pnum;
int status = bdrv_block_status_above(blk_bs(exp->blk), NULL,
offset + progress,
size - progress, &pnum, NULL,
NULL);
bool final;
if (status < 0) {
char *msg = g_strdup_printf("unable to check for holes: %s",
strerror(-status));
ret = nbd_co_send_structured_error(client, handle, -status, msg,
errp);
g_free(msg);
return ret;
}
assert(pnum && pnum <= size - progress);
final = progress + pnum == size;
if (status & BDRV_BLOCK_ZERO) {
NBDStructuredReadHole chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
};
trace_nbd_co_send_structured_read_hole(handle, offset + progress,
pnum);
set_be_chunk(&chunk.h, final ? NBD_REPLY_FLAG_DONE : 0,
NBD_REPLY_TYPE_OFFSET_HOLE,
handle, sizeof(chunk) - sizeof(chunk.h));
stq_be_p(&chunk.offset, offset + progress);
stl_be_p(&chunk.length, pnum);
ret = nbd_co_send_iov(client, iov, 1, errp);
} else {
ret = blk_pread(exp->blk, offset + progress + exp->dev_offset,
data + progress, pnum);
if (ret < 0) {
error_setg_errno(errp, -ret, "reading from file failed");
break;
}
ret = nbd_co_send_structured_read(client, handle, offset + progress,
data + progress, pnum, final,
errp);
}
if (ret < 0) {
break;
}
progress += pnum;
}
return ret;
}
/*
* Populate @extents from block status. Update @bytes to be the actual
* length encoded (which may be smaller than the original), and update
* @nb_extents to the number of extents used.
*
* Returns zero on success and -errno on bdrv_block_status_above failure.
*/
static int blockstatus_to_extents(BlockDriverState *bs, uint64_t offset,
uint64_t *bytes, NBDExtent *extents,
unsigned int *nb_extents)
{
uint64_t remaining_bytes = *bytes;
NBDExtent *extent = extents, *extents_end = extents + *nb_extents;
bool first_extent = true;
assert(*nb_extents);
while (remaining_bytes) {
uint32_t flags;
int64_t num;
int ret = bdrv_block_status_above(bs, NULL, offset, remaining_bytes,
&num, NULL, NULL);
if (ret < 0) {
return ret;
}
flags = (ret & BDRV_BLOCK_ALLOCATED ? 0 : NBD_STATE_HOLE) |
(ret & BDRV_BLOCK_ZERO ? NBD_STATE_ZERO : 0);
if (first_extent) {
extent->flags = flags;
extent->length = num;
first_extent = false;
} else if (flags == extent->flags) {
/* extend current extent */
extent->length += num;
} else {
if (extent + 1 == extents_end) {
break;
}
/* start new extent */
extent++;
extent->flags = flags;
extent->length = num;
}
offset += num;
remaining_bytes -= num;
}
extents_end = extent + 1;
for (extent = extents; extent < extents_end; extent++) {
extent->flags = cpu_to_be32(extent->flags);
extent->length = cpu_to_be32(extent->length);
}
*bytes -= remaining_bytes;
*nb_extents = extents_end - extents;
return 0;
}
/* nbd_co_send_extents
*
* @length is only for tracing purposes (and may be smaller or larger
* than the client's original request). @last controls whether
* NBD_REPLY_FLAG_DONE is sent. @extents should already be in
* big-endian format.
*/
static int nbd_co_send_extents(NBDClient *client, uint64_t handle,
NBDExtent *extents, unsigned int nb_extents,
uint64_t length, bool last,
uint32_t context_id, Error **errp)
{
NBDStructuredMeta chunk;
struct iovec iov[] = {
{.iov_base = &chunk, .iov_len = sizeof(chunk)},
{.iov_base = extents, .iov_len = nb_extents * sizeof(extents[0])}
};
trace_nbd_co_send_extents(handle, nb_extents, context_id, length, last);
set_be_chunk(&chunk.h, last ? NBD_REPLY_FLAG_DONE : 0,
NBD_REPLY_TYPE_BLOCK_STATUS,
handle, sizeof(chunk) - sizeof(chunk.h) + iov[1].iov_len);
stl_be_p(&chunk.context_id, context_id);
return nbd_co_send_iov(client, iov, 2, errp);
}
/* Get block status from the exported device and send it to the client */
static int nbd_co_send_block_status(NBDClient *client, uint64_t handle,
BlockDriverState *bs, uint64_t offset,
uint32_t length, bool dont_fragment,
bool last, uint32_t context_id,
Error **errp)
{
int ret;
unsigned int nb_extents = dont_fragment ? 1 : NBD_MAX_BITMAP_EXTENTS;
NBDExtent *extents = g_new(NBDExtent, nb_extents);
uint64_t final_length = length;
ret = blockstatus_to_extents(bs, offset, &final_length, extents,
&nb_extents);
if (ret < 0) {
g_free(extents);
return nbd_co_send_structured_error(
client, handle, -ret, "can't get block status", errp);
}
ret = nbd_co_send_extents(client, handle, extents, nb_extents,
final_length, last, context_id, errp);
g_free(extents);
return ret;
}
/*
* Populate @extents from a dirty bitmap. Unless @dont_fragment, the
* final extent may exceed the original @length. Store in @length the
* byte length encoded (which may be smaller or larger than the
* original), and return the number of extents used.
*/
static unsigned int bitmap_to_extents(BdrvDirtyBitmap *bitmap, uint64_t offset,
uint64_t *length, NBDExtent *extents,
unsigned int nb_extents,
bool dont_fragment)
{
uint64_t begin = offset, end = offset;
uint64_t overall_end = offset + *length;
unsigned int i = 0;
BdrvDirtyBitmapIter *it;
bool dirty;
bdrv_dirty_bitmap_lock(bitmap);
it = bdrv_dirty_iter_new(bitmap);
dirty = bdrv_get_dirty_locked(NULL, bitmap, offset);
assert(begin < overall_end && nb_extents);
while (begin < overall_end && i < nb_extents) {
nbd/server: fix bitmap export bitmap_to_extents function is broken: it switches dirty variable after every iteration, however it can process only part of dirty (or zero) area during one iteration in case when this area is too large for one extent. Fortunately, the bug doesn't produce wrong extent flags: it just inserts a zero-length extent between sequential extents representing large dirty (or zero) area. However, zero-length extents are forbidden by the NBD protocol. So, a careful client should consider such a reply as a server fault, while a less-careful will likely ignore zero-length extents. The bug can only be triggered by a client that requests block status for nearly 4G at once (a request of 4G and larger is impossible per the protocol, and requests smaller than 4G less the bitmap granularity cause the loop to quit iterating rather than revisit the tail of the large area); it also cannot trigger if the client used the NBD_CMD_FLAG_REQ_ONE flag. Since qemu 3.0 as client (using the x-dirty-bitmap extension) always passes the flag, it is immune; and we are not aware of other open-source clients that know how to request qemu:dirty-bitmap:FOO contexts. Clients that want to avoid the bug could cap block status requests to a smaller length, such as 2G or 3G. Fix this by more careful handling of dirty variable. Bug was introduced in 3d068aff16 "nbd/server: implement dirty bitmap export", with the whole function. and is present in v3.0.0 release. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180914165116.23182-1-vsementsov@virtuozzo.com> CC: qemu-stable@nongnu.org Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: improved commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-09-14 19:51:16 +03:00
bool next_dirty = !dirty;
if (dirty) {
end = bdrv_dirty_bitmap_next_zero(bitmap, begin, UINT64_MAX);
} else {
bdrv_set_dirty_iter(it, begin);
end = bdrv_dirty_iter_next(it);
}
if (end == -1 || end - begin > UINT32_MAX) {
/* Cap to an aligned value < 4G beyond begin. */
end = MIN(bdrv_dirty_bitmap_size(bitmap),
begin + UINT32_MAX + 1 -
bdrv_dirty_bitmap_granularity(bitmap));
nbd/server: fix bitmap export bitmap_to_extents function is broken: it switches dirty variable after every iteration, however it can process only part of dirty (or zero) area during one iteration in case when this area is too large for one extent. Fortunately, the bug doesn't produce wrong extent flags: it just inserts a zero-length extent between sequential extents representing large dirty (or zero) area. However, zero-length extents are forbidden by the NBD protocol. So, a careful client should consider such a reply as a server fault, while a less-careful will likely ignore zero-length extents. The bug can only be triggered by a client that requests block status for nearly 4G at once (a request of 4G and larger is impossible per the protocol, and requests smaller than 4G less the bitmap granularity cause the loop to quit iterating rather than revisit the tail of the large area); it also cannot trigger if the client used the NBD_CMD_FLAG_REQ_ONE flag. Since qemu 3.0 as client (using the x-dirty-bitmap extension) always passes the flag, it is immune; and we are not aware of other open-source clients that know how to request qemu:dirty-bitmap:FOO contexts. Clients that want to avoid the bug could cap block status requests to a smaller length, such as 2G or 3G. Fix this by more careful handling of dirty variable. Bug was introduced in 3d068aff16 "nbd/server: implement dirty bitmap export", with the whole function. and is present in v3.0.0 release. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180914165116.23182-1-vsementsov@virtuozzo.com> CC: qemu-stable@nongnu.org Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: improved commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-09-14 19:51:16 +03:00
next_dirty = dirty;
}
if (dont_fragment && end > overall_end) {
end = overall_end;
}
extents[i].length = cpu_to_be32(end - begin);
extents[i].flags = cpu_to_be32(dirty ? NBD_STATE_DIRTY : 0);
i++;
begin = end;
nbd/server: fix bitmap export bitmap_to_extents function is broken: it switches dirty variable after every iteration, however it can process only part of dirty (or zero) area during one iteration in case when this area is too large for one extent. Fortunately, the bug doesn't produce wrong extent flags: it just inserts a zero-length extent between sequential extents representing large dirty (or zero) area. However, zero-length extents are forbidden by the NBD protocol. So, a careful client should consider such a reply as a server fault, while a less-careful will likely ignore zero-length extents. The bug can only be triggered by a client that requests block status for nearly 4G at once (a request of 4G and larger is impossible per the protocol, and requests smaller than 4G less the bitmap granularity cause the loop to quit iterating rather than revisit the tail of the large area); it also cannot trigger if the client used the NBD_CMD_FLAG_REQ_ONE flag. Since qemu 3.0 as client (using the x-dirty-bitmap extension) always passes the flag, it is immune; and we are not aware of other open-source clients that know how to request qemu:dirty-bitmap:FOO contexts. Clients that want to avoid the bug could cap block status requests to a smaller length, such as 2G or 3G. Fix this by more careful handling of dirty variable. Bug was introduced in 3d068aff16 "nbd/server: implement dirty bitmap export", with the whole function. and is present in v3.0.0 release. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20180914165116.23182-1-vsementsov@virtuozzo.com> CC: qemu-stable@nongnu.org Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: improved commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-09-14 19:51:16 +03:00
dirty = next_dirty;
}
bdrv_dirty_iter_free(it);
bdrv_dirty_bitmap_unlock(bitmap);
assert(offset < end);
*length = end - offset;
return i;
}
static int nbd_co_send_bitmap(NBDClient *client, uint64_t handle,
BdrvDirtyBitmap *bitmap, uint64_t offset,
uint32_t length, bool dont_fragment, bool last,
uint32_t context_id, Error **errp)
{
int ret;
unsigned int nb_extents = dont_fragment ? 1 : NBD_MAX_BITMAP_EXTENTS;
NBDExtent *extents = g_new(NBDExtent, nb_extents);
uint64_t final_length = length;
nb_extents = bitmap_to_extents(bitmap, offset, &final_length, extents,
nb_extents, dont_fragment);
ret = nbd_co_send_extents(client, handle, extents, nb_extents,
final_length, last, context_id, errp);
g_free(extents);
return ret;
}
/* nbd_co_receive_request
* Collect a client request. Return 0 if request looks valid, -EIO to drop
* connection right away, and any other negative value to report an error to
* the client (although the caller may still need to disconnect after reporting
* the error).
*/
static int nbd_co_receive_request(NBDRequestData *req, NBDRequest *request,
Error **errp)
{
NBDClient *client = req->client;
int valid_flags;
g_assert(qemu_in_coroutine());
assert(client->recv_coroutine == qemu_coroutine_self());
if (nbd_receive_request(client->ioc, request, errp) < 0) {
return -EIO;
}
trace_nbd_co_receive_request_decode_type(request->handle, request->type,
nbd_cmd_lookup(request->type));
if (request->type != NBD_CMD_WRITE) {
/* No payload, we are ready to read the next request. */
req->complete = true;
}
if (request->type == NBD_CMD_DISC) {
/* Special case: we're going to disconnect without a reply,
* whether or not flags, from, or len are bogus */
return -EIO;
}
if (request->type == NBD_CMD_READ || request->type == NBD_CMD_WRITE ||
request->type == NBD_CMD_CACHE)
{
if (request->len > NBD_MAX_BUFFER_SIZE) {
error_setg(errp, "len (%" PRIu32" ) is larger than max len (%u)",
request->len, NBD_MAX_BUFFER_SIZE);
return -EINVAL;
}
req->data = blk_try_blockalign(client->exp->blk, request->len);
if (req->data == NULL) {
error_setg(errp, "No memory");
return -ENOMEM;
}
}
if (request->type == NBD_CMD_WRITE) {
if (nbd_read(client->ioc, req->data, request->len, "CMD_WRITE data",
errp) < 0)
{
return -EIO;
}
req->complete = true;
trace_nbd_co_receive_request_payload_received(request->handle,
request->len);
}
/* Sanity checks. */
if (client->exp->nbdflags & NBD_FLAG_READ_ONLY &&
(request->type == NBD_CMD_WRITE ||
request->type == NBD_CMD_WRITE_ZEROES ||
request->type == NBD_CMD_TRIM)) {
error_setg(errp, "Export is read-only");
return -EROFS;
}
if (request->from > client->exp->size ||
request->len > client->exp->size - request->from) {
error_setg(errp, "operation past EOF; From: %" PRIu64 ", Len: %" PRIu32
", Size: %" PRIu64, request->from, request->len,
client->exp->size);
return (request->type == NBD_CMD_WRITE ||
request->type == NBD_CMD_WRITE_ZEROES) ? -ENOSPC : -EINVAL;
}
nbd/server: Trace client noncompliance on unaligned requests We've recently added traces for clients to flag server non-compliance; let's do the same for servers to flag client non-compliance. According to the spec, if the client requests NBD_INFO_BLOCK_SIZE, it is promising to send all requests aligned to those boundaries. Of course, if the client does not request NBD_INFO_BLOCK_SIZE, then it made no promises so we shouldn't flag anything; and because we are willing to handle clients that made no promises (the spec allows us to use NBD_REP_ERR_BLOCK_SIZE_REQD if we had been unwilling), we already have to handle unaligned requests (which the block layer already does on our behalf). So even though the spec allows us to return EINVAL for clients that promised to behave, it's easier to always answer unaligned requests. Still, flagging non-compliance can be useful in debugging a client that is trying to be maximally portable. Qemu as client used to have one spot where it sent non-compliant requests: if the server sends an unaligned reply to NBD_CMD_BLOCK_STATUS, and the client was iterating over the entire disk, the next request would start at that unaligned point; this was fixed in commit a39286dd when the client was taught to work around server non-compliance; but is equally fixed if the server is patched to not send unaligned replies in the first place (yes, qemu 4.0 as server still has few such bugs, although they will be patched in 4.1). Fortunately, I did not find any more spots where qemu as client was non-compliant. I was able to test the patch by using the following hack to convince qemu-io to run various unaligned commands, coupled with serving 512-byte alignment by intentionally omitting '-f raw' on the server while viewing server traces. | diff --git i/nbd/client.c w/nbd/client.c | index 427980bdd22..1858b2aac35 100644 | --- i/nbd/client.c | +++ w/nbd/client.c | @@ -449,6 +449,7 @@ static int nbd_opt_info_or_go(QIOChannel *ioc, uint32_t opt, | nbd_send_opt_abort(ioc); | return -1; | } | + info->min_block = 1;//hack | if (!is_power_of_2(info->min_block)) { | error_setg(errp, "server minimum block size %" PRIu32 | " is not a power of two", info->min_block); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20190403030526.12258-3-eblake@redhat.com> [eblake: address minor review nits] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-04-03 06:05:21 +03:00
if (client->check_align && !QEMU_IS_ALIGNED(request->from | request->len,
client->check_align)) {
/*
* The block layer gracefully handles unaligned requests, but
* it's still worth tracing client non-compliance
*/
trace_nbd_co_receive_align_compliance(nbd_cmd_lookup(request->type),
request->from,
request->len,
client->check_align);
}
valid_flags = NBD_CMD_FLAG_FUA;
if (request->type == NBD_CMD_READ && client->structured_reply) {
valid_flags |= NBD_CMD_FLAG_DF;
} else if (request->type == NBD_CMD_WRITE_ZEROES) {
valid_flags |= NBD_CMD_FLAG_NO_HOLE;
} else if (request->type == NBD_CMD_BLOCK_STATUS) {
valid_flags |= NBD_CMD_FLAG_REQ_ONE;
}
if (request->flags & ~valid_flags) {
error_setg(errp, "unsupported flags for command %s (got 0x%x)",
nbd_cmd_lookup(request->type), request->flags);
return -EINVAL;
}
return 0;
}
/* Send simple reply without a payload, or a structured error
* @error_msg is ignored if @ret >= 0
* Returns 0 if connection is still live, -errno on failure to talk to client
*/
static coroutine_fn int nbd_send_generic_reply(NBDClient *client,
uint64_t handle,
int ret,
const char *error_msg,
Error **errp)
{
if (client->structured_reply && ret < 0) {
return nbd_co_send_structured_error(client, handle, -ret, error_msg,
errp);
} else {
return nbd_co_send_simple_reply(client, handle, ret < 0 ? -ret : 0,
NULL, 0, errp);
}
}
/* Handle NBD_CMD_READ request.
* Return -errno if sending fails. Other errors are reported directly to the
* client as an error reply. */
static coroutine_fn int nbd_do_cmd_read(NBDClient *client, NBDRequest *request,
uint8_t *data, Error **errp)
{
int ret;
NBDExport *exp = client->exp;
assert(request->type == NBD_CMD_READ || request->type == NBD_CMD_CACHE);
/* XXX: NBD Protocol only documents use of FUA with WRITE */
if (request->flags & NBD_CMD_FLAG_FUA) {
ret = blk_co_flush(exp->blk);
if (ret < 0) {
return nbd_send_generic_reply(client, request->handle, ret,
"flush failed", errp);
}
}
if (client->structured_reply && !(request->flags & NBD_CMD_FLAG_DF) &&
request->len && request->type != NBD_CMD_CACHE)
{
return nbd_co_send_sparse_read(client, request->handle, request->from,
data, request->len, errp);
}
ret = blk_pread(exp->blk, request->from + exp->dev_offset, data,
request->len);
if (ret < 0 || request->type == NBD_CMD_CACHE) {
return nbd_send_generic_reply(client, request->handle, ret,
"reading from file failed", errp);
}
if (client->structured_reply) {
if (request->len) {
return nbd_co_send_structured_read(client, request->handle,
request->from, data,
request->len, true, errp);
} else {
return nbd_co_send_structured_done(client, request->handle, errp);
}
} else {
return nbd_co_send_simple_reply(client, request->handle, 0,
data, request->len, errp);
}
}
/* Handle NBD request.
* Return -errno if sending fails. Other errors are reported directly to the
* client as an error reply. */
static coroutine_fn int nbd_handle_request(NBDClient *client,
NBDRequest *request,
uint8_t *data, Error **errp)
{
int ret;
int flags;
NBDExport *exp = client->exp;
char *msg;
switch (request->type) {
case NBD_CMD_READ:
case NBD_CMD_CACHE:
return nbd_do_cmd_read(client, request, data, errp);
case NBD_CMD_WRITE:
flags = 0;
if (request->flags & NBD_CMD_FLAG_FUA) {
flags |= BDRV_REQ_FUA;
}
ret = blk_pwrite(exp->blk, request->from + exp->dev_offset,
data, request->len, flags);
return nbd_send_generic_reply(client, request->handle, ret,
"writing to file failed", errp);
case NBD_CMD_WRITE_ZEROES:
flags = 0;
if (request->flags & NBD_CMD_FLAG_FUA) {
flags |= BDRV_REQ_FUA;
}
if (!(request->flags & NBD_CMD_FLAG_NO_HOLE)) {
flags |= BDRV_REQ_MAY_UNMAP;
}
ret = blk_pwrite_zeroes(exp->blk, request->from + exp->dev_offset,
request->len, flags);
return nbd_send_generic_reply(client, request->handle, ret,
"writing to file failed", errp);
case NBD_CMD_DISC:
/* unreachable, thanks to special case in nbd_co_receive_request() */
abort();
case NBD_CMD_FLUSH:
ret = blk_co_flush(exp->blk);
return nbd_send_generic_reply(client, request->handle, ret,
"flush failed", errp);
case NBD_CMD_TRIM:
ret = blk_co_pdiscard(exp->blk, request->from + exp->dev_offset,
request->len);
nbd/server: Honor FUA request on NBD_CMD_TRIM The NBD spec states that since trim requests can affect disk contents, then they should allow for FUA semantics just like writes for ensuring the disk has settled before returning. As bdrv_[co_]pdiscard() does not support a flags argument, we can't pass FUA down the block layer stack, and must therefore emulate it with a flush at the NBD layer. Note that in all reality, generic well-behaved clients will never send TRIM+FUA (in fact, qemu as a client never does, and we have no intention to plumb flags into bdrv_pdiscard). This is because the NBD protocol states that it is unspecified to READ a trimmed area (you might read stale data, all zeroes, or even random unrelated data) without first rewriting it, and even the experimental BLOCK_STATUS extension states that TRIM need not affect reported status. Thus, in the general case, a client cannot tell the difference between an arbitrary server that ignores TRIM, a server that had a power outage without flushing to disk, and a server that actually affected the disk before returning; so waiting for the trim actions to flush to disk makes little sense. However, for a specific client and server pair, where the client knows the server treats TRIM'd areas as guaranteed reads-zero, waiting for a flush makes sense, hence why the protocol documents that FUA is valid on trim. So, even though the NBD protocol doesn't have a way for the server to advertise what effects (if any) TRIM will actually have, and thus any client that relies on specific effects is probably in error, we can at least support a client that requests TRIM+FUA. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180307225732.155835-1-eblake@redhat.com>
2018-03-08 01:57:32 +03:00
if (ret == 0 && request->flags & NBD_CMD_FLAG_FUA) {
ret = blk_co_flush(exp->blk);
}
return nbd_send_generic_reply(client, request->handle, ret,
"discard failed", errp);
case NBD_CMD_BLOCK_STATUS:
if (!request->len) {
return nbd_send_generic_reply(client, request->handle, -EINVAL,
"need non-zero length", errp);
}
if (client->export_meta.valid &&
(client->export_meta.base_allocation ||
client->export_meta.bitmap))
{
bool dont_fragment = request->flags & NBD_CMD_FLAG_REQ_ONE;
if (client->export_meta.base_allocation) {
ret = nbd_co_send_block_status(client, request->handle,
blk_bs(exp->blk), request->from,
request->len, dont_fragment,
!client->export_meta.bitmap,
NBD_META_ID_BASE_ALLOCATION,
errp);
if (ret < 0) {
return ret;
}
}
if (client->export_meta.bitmap) {
ret = nbd_co_send_bitmap(client, request->handle,
client->exp->export_bitmap,
request->from, request->len,
dont_fragment,
true, NBD_META_ID_DIRTY_BITMAP, errp);
if (ret < 0) {
return ret;
}
}
return ret;
} else {
return nbd_send_generic_reply(client, request->handle, -EINVAL,
"CMD_BLOCK_STATUS not negotiated",
errp);
}
default:
msg = g_strdup_printf("invalid request type (%" PRIu32 ") received",
request->type);
ret = nbd_send_generic_reply(client, request->handle, -EINVAL, msg,
errp);
g_free(msg);
return ret;
}
}
/* Owns a reference to the NBDClient passed as opaque. */
static coroutine_fn void nbd_trip(void *opaque)
{
NBDClient *client = opaque;
NBDRequestData *req;
NBDRequest request = { 0 }; /* GCC thinks it can be used uninitialized */
int ret;
Error *local_err = NULL;
trace_nbd_trip();
if (client->closing) {
nbd_client_put(client);
return;
}
req = nbd_request_get(client);
ret = nbd_co_receive_request(req, &request, &local_err);
client->recv_coroutine = NULL;
if (client->closing) {
/*
* The client may be closed when we are blocked in
* nbd_co_receive_request()
*/
goto done;
}
nbd_client_receive_next_request(client);
if (ret == -EIO) {
goto disconnect;
}
if (ret < 0) {
/* It wans't -EIO, so, according to nbd_co_receive_request()
* semantics, we should return the error to the client. */
Error *export_err = local_err;
local_err = NULL;
ret = nbd_send_generic_reply(client, request.handle, -EINVAL,
error_get_pretty(export_err), &local_err);
error_free(export_err);
} else {
ret = nbd_handle_request(client, &request, req->data, &local_err);
}
if (ret < 0) {
error_prepend(&local_err, "Failed to send reply: ");
goto disconnect;
}
/* We must disconnect after NBD_CMD_WRITE if we did not
* read the payload.
*/
if (!req->complete) {
error_setg(&local_err, "Request handling failed in intermediate state");
goto disconnect;
}
done:
nbd_request_put(req);
nbd_client_put(client);
return;
disconnect:
if (local_err) {
error_reportf_err(local_err, "Disconnect client, due to: ");
}
nbd_request_put(req);
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
client_close(client, true);
nbd_client_put(client);
}
static void nbd_client_receive_next_request(NBDClient *client)
{
if (!client->recv_coroutine && client->nb_requests < MAX_NBD_REQUESTS) {
nbd_client_get(client);
client->recv_coroutine = qemu_coroutine_create(nbd_trip, client);
aio_co_schedule(client->exp->ctx, client->recv_coroutine);
}
}
static coroutine_fn void nbd_co_client_start(void *opaque)
{
NBDClient *client = opaque;
Error *local_err = NULL;
qemu_co_mutex_init(&client->send_lock);
if (nbd_negotiate(client, &local_err)) {
if (local_err) {
error_report_err(local_err);
}
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
client_close(client, false);
return;
}
nbd_client_receive_next_request(client);
}
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
/*
* Create a new client listener using the given channel @sioc.
* Begin servicing it in a coroutine. When the connection closes, call
* @close_fn with an indication of whether the client completed negotiation.
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
*/
void nbd_client_new(QIOChannelSocket *sioc,
QCryptoTLSCreds *tlscreds,
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 19:20:33 +03:00
const char *tlsauthz,
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
void (*close_fn)(NBDClient *, bool))
{
NBDClient *client;
Coroutine *co;
client = g_new0(NBDClient, 1);
client->refcount = 1;
client->tlscreds = tlscreds;
if (tlscreds) {
object_ref(OBJECT(client->tlscreds));
}
qemu-nbd: add support for authorization of TLS clients Currently any client which can complete the TLS handshake is able to use the NBD server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the NBD server. This is still a fairly low bar to cross. This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the authorization check will not be permitted to use the NBD server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name is CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB escape the commas in the name and use: qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ --object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB' \ --tls-creds tls0 \ --tls-authz authz0 \ ....other qemu-nbd args... NB: a real shell command line would not have leading whitespace after the line continuation, it is just included here for clarity. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20190227162035.18543-2-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: split long line in --help text, tweak 233 to show that whitespace after ,, in identity= portion is actually okay] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-27 19:20:33 +03:00
client->tlsauthz = g_strdup(tlsauthz);
client->sioc = sioc;
object_ref(OBJECT(client->sioc));
client->ioc = QIO_CHANNEL(sioc);
object_ref(OBJECT(client->ioc));
nbd: Fix regression on resiliency to port scan Back in qemu 2.5, qemu-nbd was immune to port probes (a transient server would not quit, regardless of how many probe connections came and went, until a connection actually negotiated). But we broke that in commit ee7d7aa when removing the return value to nbd_client_new(), although that patch also introduced a bug causing an assertion failure on a client that fails negotiation. We then made it worse during refactoring in commit 1a6245a (a segfault before we could even assert); the (masked) assertion was cleaned up in d3780c2 (still in 2.6), and just recently we finally fixed the segfault ("nbd: Fully intialize client in case of failed negotiation"). But that still means that ever since we added TLS support to qemu-nbd, we have been vulnerable to an ill-timed port-scan being able to cause a denial of service by taking down qemu-nbd before a real client has a chance to connect. Since negotiation is now handled asynchronously via coroutines, we no longer have a synchronous point of return by re-adding a return value to nbd_client_new(). So this patch instead wires things up to pass the negotiation status through the close_fn callback function. Simple test across two terminals: $ qemu-nbd -f raw -p 30001 file $ nmap 127.0.0.1 -p 30001 && \ qemu-io -c 'r 0 512' -f raw nbd://localhost:30001 Note that this patch does not change what constitutes successful negotiation (thus, a client must enter transmission phase before that client can be considered as a reason to terminate the server when the connection ends). Perhaps we may want to tweak things in a later patch to also treat a client that uses NBD_OPT_ABORT as being a 'successful' negotiation (the client correctly talked the NBD protocol, and informed us it was not going to use our export after all), but that's a discussion for another day. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451614 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170608222617.20376-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-09 01:26:17 +03:00
client->close_fn = close_fn;
co = qemu_coroutine_create(nbd_co_client_start, client);
qemu_coroutine_enter(co);
}