qemu/hw/virtio/virtio-balloon.c

537 lines
15 KiB
C
Raw Normal View History

/*
* Virtio Balloon Device
*
* Copyright IBM, Corp. 2008
* Copyright (C) 2011 Red Hat, Inc.
* Copyright (C) 2011 Amit Shah <amit.shah@redhat.com>
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qemu/iov.h"
#include "qemu/timer.h"
#include "qemu-common.h"
#include "hw/virtio/virtio.h"
#include "hw/i386/pc.h"
#include "sysemu/balloon.h"
#include "hw/virtio/virtio-balloon.h"
#include "sysemu/kvm.h"
#include "exec/address-spaces.h"
#include "qapi/visitor.h"
#include "qapi-event.h"
#include "trace.h"
#if defined(__linux__)
#include <sys/mman.h>
#endif
#include "hw/virtio/virtio-bus.h"
#include "hw/virtio/virtio-access.h"
#define BALLOON_PAGE_SIZE (1 << VIRTIO_BALLOON_PFN_SHIFT)
static void balloon_page(void *addr, int deflate)
{
#if defined(__linux__)
if (!qemu_balloon_is_inhibited() && (!kvm_enabled() ||
kvm_has_sync_mmu())) {
qemu_madvise(addr, BALLOON_PAGE_SIZE,
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 15:26:05 +04:00
deflate ? QEMU_MADV_WILLNEED : QEMU_MADV_DONTNEED);
}
#endif
}
static const char *balloon_stat_names[] = {
[VIRTIO_BALLOON_S_SWAP_IN] = "stat-swap-in",
[VIRTIO_BALLOON_S_SWAP_OUT] = "stat-swap-out",
[VIRTIO_BALLOON_S_MAJFLT] = "stat-major-faults",
[VIRTIO_BALLOON_S_MINFLT] = "stat-minor-faults",
[VIRTIO_BALLOON_S_MEMFREE] = "stat-free-memory",
[VIRTIO_BALLOON_S_MEMTOT] = "stat-total-memory",
[VIRTIO_BALLOON_S_AVAIL] = "stat-available-memory",
[VIRTIO_BALLOON_S_NR] = NULL
};
/*
* reset_stats - Mark all items in the stats array as unset
*
* This function needs to be called at device initialization and before
* updating to a set of newly-generated stats. This will ensure that no
* stale values stick around in case the guest reports a subset of the supported
* statistics.
*/
static inline void reset_stats(VirtIOBalloon *dev)
{
int i;
for (i = 0; i < VIRTIO_BALLOON_S_NR; dev->stats[i++] = -1);
}
static bool balloon_stats_supported(const VirtIOBalloon *s)
{
VirtIODevice *vdev = VIRTIO_DEVICE(s);
return virtio_vdev_has_feature(vdev, VIRTIO_BALLOON_F_STATS_VQ);
}
static bool balloon_stats_enabled(const VirtIOBalloon *s)
{
return s->stats_poll_interval > 0;
}
static void balloon_stats_destroy_timer(VirtIOBalloon *s)
{
if (balloon_stats_enabled(s)) {
timer_del(s->stats_timer);
timer_free(s->stats_timer);
s->stats_timer = NULL;
s->stats_poll_interval = 0;
}
}
static void balloon_stats_change_timer(VirtIOBalloon *s, int64_t secs)
{
timer_mod(s->stats_timer, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + secs * 1000);
}
static void balloon_stats_poll_cb(void *opaque)
{
VirtIOBalloon *s = opaque;
VirtIODevice *vdev = VIRTIO_DEVICE(s);
if (s->stats_vq_elem == NULL || !balloon_stats_supported(s)) {
/* re-schedule */
balloon_stats_change_timer(s, s->stats_poll_interval);
return;
}
virtqueue_push(s->svq, s->stats_vq_elem, s->stats_vq_offset);
virtio_notify(vdev, s->svq);
g_free(s->stats_vq_elem);
s->stats_vq_elem = NULL;
}
static void balloon_stats_get_all(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
Error *err = NULL;
VirtIOBalloon *s = opaque;
int i;
visit_start_struct(v, name, NULL, 0, &err);
if (err) {
goto out;
}
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 16:48:54 +03:00
visit_type_int(v, "last-update", &s->stats_last_update, &err);
qapi: Replace uncommon use of the error API by the common one We commonly use the error API like this: err = NULL; foo(..., &err); if (err) { goto out; } bar(..., &err); Every error source is checked separately. The second function is only called when the first one succeeds. Both functions are free to pass their argument to error_set(). Because error_set() asserts no error has been set, this effectively means they must not be called with an error set. The qapi-generated code uses the error API differently: // *errp was initialized to NULL somewhere up the call chain frob(..., errp); gnat(..., errp); Errors accumulate in *errp: first error wins, subsequent errors get dropped. To make this work, the second function does nothing when called with an error set. Requires non-null errp, or else the second function can't see the first one fail. This usage has also bled into visitor tests, and two device model object property getters rtc_get_date() and balloon_stats_get_all(). With the "accumulate" technique, you need fewer error checks in callers, and buy that with an error check in every callee. Can be nice. However, mixing the two techniques is confusing. You can't use the "accumulate" technique with functions designed for the "check separately" technique. You can use the "check separately" technique with functions designed for the "accumulate" technique, but then error_set() can't catch you setting an error more than once. Standardize on the "check separately" technique for now, because it's overwhelmingly prevalent. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07 11:53:54 +04:00
if (err) {
goto out_end;
}
visit_start_struct(v, "stats", NULL, 0, &err);
if (err) {
goto out_end;
}
for (i = 0; i < VIRTIO_BALLOON_S_NR; i++) {
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 16:48:54 +03:00
visit_type_uint64(v, balloon_stat_names[i], &s->stats[i], &err);
if (err) {
qapi: Split visit_end_struct() into pieces As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-29 00:45:27 +03:00
goto out_nested;
}
}
qapi: Split visit_end_struct() into pieces As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-29 00:45:27 +03:00
visit_check_struct(v, &err);
out_nested:
visit_end_struct(v);
qapi: Split visit_end_struct() into pieces As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-29 00:45:27 +03:00
if (!err) {
visit_check_struct(v, &err);
}
out_end:
qapi: Split visit_end_struct() into pieces As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-29 00:45:27 +03:00
visit_end_struct(v);
out:
error_propagate(errp, err);
}
static void balloon_stats_get_poll_interval(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
VirtIOBalloon *s = opaque;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 16:48:54 +03:00
visit_type_int(v, name, &s->stats_poll_interval, errp);
}
static void balloon_stats_set_poll_interval(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
VirtIOBalloon *s = opaque;
Error *local_err = NULL;
int64_t value;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 16:48:54 +03:00
visit_type_int(v, name, &value, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (value < 0) {
error_setg(errp, "timer value must be greater than zero");
return;
}
if (value > UINT32_MAX) {
error_setg(errp, "timer value is too big");
return;
}
if (value == s->stats_poll_interval) {
return;
}
if (value == 0) {
/* timer=0 disables the timer */
balloon_stats_destroy_timer(s);
return;
}
if (balloon_stats_enabled(s)) {
/* timer interval change */
s->stats_poll_interval = value;
balloon_stats_change_timer(s, value);
return;
}
/* create a new timer */
g_assert(s->stats_timer == NULL);
s->stats_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, balloon_stats_poll_cb, s);
s->stats_poll_interval = value;
balloon_stats_change_timer(s, 0);
}
static void virtio_balloon_handle_output(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
VirtQueueElement *elem;
MemoryRegionSection section;
for (;;) {
size_t offset = 0;
uint32_t pfn;
elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
return;
}
while (iov_to_buf(elem->out_sg, elem->out_num, offset, &pfn, 4) == 4) {
ram_addr_t pa;
ram_addr_t addr;
int p = virtio_ldl_p(vdev, &pfn);
pa = (ram_addr_t) p << VIRTIO_BALLOON_PFN_SHIFT;
offset += 4;
/* FIXME: remove get_system_memory(), but how? */
section = memory_region_find(get_system_memory(), pa, 1);
if (!int128_nz(section.size) || !memory_region_is_ram(section.mr))
continue;
trace_virtio_balloon_handle_output(memory_region_name(section.mr),
pa);
/* Using memory_region_get_ram_ptr is bending the rules a bit, but
should be OK because we only want a single page. */
addr = section.offset_within_region;
balloon_page(memory_region_get_ram_ptr(section.mr) + addr,
!!(vq == s->dvq));
memory_region_unref(section.mr);
}
virtqueue_push(vq, elem, offset);
virtio_notify(vdev, vq);
g_free(elem);
}
}
static void virtio_balloon_receive_stats(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
VirtQueueElement *elem;
VirtIOBalloonStat stat;
size_t offset = 0;
qemu_timeval tv;
elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
goto out;
}
if (s->stats_vq_elem != NULL) {
/* This should never happen if the driver follows the spec. */
virtqueue_push(vq, s->stats_vq_elem, 0);
virtio_notify(vdev, vq);
g_free(s->stats_vq_elem);
}
s->stats_vq_elem = elem;
/* Initialize the stats to get rid of any stale values. This is only
* needed to handle the case where a guest supports fewer stats than it
* used to (ie. it has booted into an old kernel).
*/
reset_stats(s);
while (iov_to_buf(elem->out_sg, elem->out_num, offset, &stat, sizeof(stat))
== sizeof(stat)) {
uint16_t tag = virtio_tswap16(vdev, stat.tag);
uint64_t val = virtio_tswap64(vdev, stat.val);
offset += sizeof(stat);
if (tag < VIRTIO_BALLOON_S_NR)
s->stats[tag] = val;
}
s->stats_vq_offset = offset;
if (qemu_gettimeofday(&tv) < 0) {
fprintf(stderr, "warning: %s: failed to get time of day\n", __func__);
goto out;
}
s->stats_last_update = tv.tv_sec;
out:
if (balloon_stats_enabled(s)) {
balloon_stats_change_timer(s, s->stats_poll_interval);
}
}
static void virtio_balloon_get_config(VirtIODevice *vdev, uint8_t *config_data)
{
VirtIOBalloon *dev = VIRTIO_BALLOON(vdev);
struct virtio_balloon_config config;
config.num_pages = cpu_to_le32(dev->num_pages);
config.actual = cpu_to_le32(dev->actual);
trace_virtio_balloon_get_config(config.num_pages, config.actual);
memcpy(config_data, &config, sizeof(struct virtio_balloon_config));
}
static int build_dimm_list(Object *obj, void *opaque)
{
GSList **list = opaque;
if (object_dynamic_cast(obj, TYPE_PC_DIMM)) {
DeviceState *dev = DEVICE(obj);
if (dev->realized) { /* only realized DIMMs matter */
*list = g_slist_prepend(*list, dev);
}
}
object_child_foreach(obj, build_dimm_list, opaque);
return 0;
}
static ram_addr_t get_current_ram_size(void)
{
GSList *list = NULL, *item;
ram_addr_t size = ram_size;
build_dimm_list(qdev_get_machine(), &list);
for (item = list; item; item = g_slist_next(item)) {
Object *obj = OBJECT(item->data);
if (!strcmp(object_get_typename(obj), TYPE_PC_DIMM)) {
size += object_property_get_int(obj, PC_DIMM_SIZE_PROP,
&error_abort);
}
}
g_slist_free(list);
return size;
}
static void virtio_balloon_set_config(VirtIODevice *vdev,
const uint8_t *config_data)
{
VirtIOBalloon *dev = VIRTIO_BALLOON(vdev);
struct virtio_balloon_config config;
uint32_t oldactual = dev->actual;
ram_addr_t vm_ram_size = get_current_ram_size();
memcpy(&config, config_data, sizeof(struct virtio_balloon_config));
dev->actual = le32_to_cpu(config.actual);
if (dev->actual != oldactual) {
qapi_event_send_balloon_change(vm_ram_size -
((ram_addr_t) dev->actual << VIRTIO_BALLOON_PFN_SHIFT),
&error_abort);
}
trace_virtio_balloon_set_config(dev->actual, oldactual);
}
static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
Error **errp)
{
balloon: add a feature bit to let Guest OS deflate balloon on oom Excessive virtio_balloon inflation can cause invocation of OOM-killer, when Linux is under severe memory pressure. Various mechanisms are responsible for correct virtio_balloon memory management. Nevertheless it is often the case that these control tools does not have enough time to react on fast changing memory load. As a result OS runs out of memory and invokes OOM-killer. The balancing of memory by use of the virtio balloon should not cause the termination of processes while there are pages in the balloon. Now there is no way for virtio balloon driver to free memory at the last moment before some process get killed by OOM-killer. This does not provide a security breach as balloon itself is running inside Guest OS and is working in the cooperation with the host. Thus some improvements from Guest side should be considered as normal. To solve the problem, introduce a virtio_balloon callback which is expected to be called from the oom notifier call chain in out_of_memory() function. If virtio balloon could release some memory, it will make the system return and retry the allocation that forced the out of memory killer to run. This behavior should be enabled if and only if appropriate feature bit is set on the device. It is off by default. This functionality was recently merged into vanilla Linux. commit 5a10b7dbf904bfe01bb9fcc6298f7df09eed77d5 Author: Raushaniya Maksudova <rmaksudova@parallels.com> Date: Mon Nov 10 09:36:29 2014 +1030 This patch adds respective control bits into QEMU. It introduces deflate-on-oom option for balloon device which does the trick. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Raushaniya Maksudova <rmaksudova@parallels.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: James Bottomley <JBottomley@Odin.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-15 13:52:52 +03:00
VirtIOBalloon *dev = VIRTIO_BALLOON(vdev);
f |= dev->host_features;
virtio_add_feature(&f, VIRTIO_BALLOON_F_STATS_VQ);
return f;
}
static void virtio_balloon_stat(void *opaque, BalloonInfo *info)
{
VirtIOBalloon *dev = opaque;
info->actual = get_current_ram_size() - ((uint64_t) dev->actual <<
VIRTIO_BALLOON_PFN_SHIFT);
}
balloon: Separate out stat and balloon handling Passing on '0' as ballooning target to indicate retrieval of stats is bad API. It also makes 'balloon 0' in the monitor cause a segfault. Have two different functions handle the different functionality instead. Detailed explanation from Markus's review: 1. do_info_balloon() is an info_async() method. It receives a callback with argument, to be called exactly once (callback frees the argument). It passes the callback via qemu_balloon_status() and indirectly through qemu_balloon_event to virtio_balloon_to_target(). virtio_balloon_to_target() executes its balloon stats half. It stores the callback in the device state. If it can't send a stats request, it resets stats and calls the callback right away. Else, it sends a stats request. The device model runs the callback when it receives the answer. Works. 2. do_balloon() is a cmd_async() method. It receives a callback with argument, to be called when the command completes. do_balloon() calls it right before it succeeds. Odd, but should work. Nevertheless, it passes the callback on via qemu_ballon() and indirectly through qemu_balloon_event to virtio_balloon_to_target(). a. If the argument is non-zero, virtio_balloon_to_target() executes its balloon half, which doesn't use the callback in any way. Odd, but works. b. If the argument is zero, virtio_balloon_to_target() executes its balloon stats half, just like in 1. It either calls the callback right away, or arranges for it to be called later. Thus, the callback runs twice: use after free and double free. Test case: start with -S -device virtio-balloon, execute "balloon 0" in human monitor. Runs the callback first from virtio_balloon_to_target(), then again from do_balloon(). Reported-by: Mike Cao <bcao@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-07-20 12:00:56 +04:00
static void virtio_balloon_to_target(void *opaque, ram_addr_t target)
{
VirtIOBalloon *dev = VIRTIO_BALLOON(opaque);
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
ram_addr_t vm_ram_size = get_current_ram_size();
if (target > vm_ram_size) {
target = vm_ram_size;
}
if (target) {
dev->num_pages = (vm_ram_size - target) >> VIRTIO_BALLOON_PFN_SHIFT;
virtio_notify_config(vdev);
}
trace_virtio_balloon_to_target(target, dev->num_pages);
}
static void virtio_balloon_save(QEMUFile *f, void *opaque)
{
virtio_save(VIRTIO_DEVICE(opaque), f);
}
static void virtio_balloon_save_device(VirtIODevice *vdev, QEMUFile *f)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
qemu_put_be32(f, s->num_pages);
qemu_put_be32(f, s->actual);
}
static int virtio_balloon_load(QEMUFile *f, void *opaque, int version_id)
{
if (version_id != 1)
return -EINVAL;
return virtio_load(VIRTIO_DEVICE(opaque), f, version_id);
}
static int virtio_balloon_load_device(VirtIODevice *vdev, QEMUFile *f,
int version_id)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
s->num_pages = qemu_get_be32(f);
s->actual = qemu_get_be32(f);
if (balloon_stats_enabled(s)) {
balloon_stats_change_timer(s, s->stats_poll_interval);
}
return 0;
}
static void virtio_balloon_device_realize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBalloon *s = VIRTIO_BALLOON(dev);
int ret;
virtio_init(vdev, "virtio-balloon", VIRTIO_ID_BALLOON,
sizeof(struct virtio_balloon_config));
ret = qemu_add_balloon_handler(virtio_balloon_to_target,
virtio_balloon_stat, s);
if (ret < 0) {
2015-03-31 20:00:26 +03:00
error_setg(errp, "Only one balloon device is supported");
virtio_cleanup(vdev);
return;
}
s->ivq = virtio_add_queue(vdev, 128, virtio_balloon_handle_output);
s->dvq = virtio_add_queue(vdev, 128, virtio_balloon_handle_output);
s->svq = virtio_add_queue(vdev, 128, virtio_balloon_receive_stats);
reset_stats(s);
register_savevm(dev, "virtio-balloon", -1, 1,
virtio_balloon_save, virtio_balloon_load, s);
}
static void virtio_balloon_device_unrealize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBalloon *s = VIRTIO_BALLOON(dev);
balloon_stats_destroy_timer(s);
qemu_remove_balloon_handler(s);
unregister_savevm(dev, "virtio-balloon", s);
virtio_cleanup(vdev);
}
static void virtio_balloon_device_reset(VirtIODevice *vdev)
{
VirtIOBalloon *s = VIRTIO_BALLOON(vdev);
if (s->stats_vq_elem != NULL) {
g_free(s->stats_vq_elem);
s->stats_vq_elem = NULL;
}
}
static void virtio_balloon_instance_init(Object *obj)
{
VirtIOBalloon *s = VIRTIO_BALLOON(obj);
object_property_add(obj, "guest-stats", "guest statistics",
balloon_stats_get_all, NULL, NULL, s, NULL);
object_property_add(obj, "guest-stats-polling-interval", "int",
balloon_stats_get_poll_interval,
balloon_stats_set_poll_interval,
NULL, s, NULL);
}
static Property virtio_balloon_properties[] = {
balloon: add a feature bit to let Guest OS deflate balloon on oom Excessive virtio_balloon inflation can cause invocation of OOM-killer, when Linux is under severe memory pressure. Various mechanisms are responsible for correct virtio_balloon memory management. Nevertheless it is often the case that these control tools does not have enough time to react on fast changing memory load. As a result OS runs out of memory and invokes OOM-killer. The balancing of memory by use of the virtio balloon should not cause the termination of processes while there are pages in the balloon. Now there is no way for virtio balloon driver to free memory at the last moment before some process get killed by OOM-killer. This does not provide a security breach as balloon itself is running inside Guest OS and is working in the cooperation with the host. Thus some improvements from Guest side should be considered as normal. To solve the problem, introduce a virtio_balloon callback which is expected to be called from the oom notifier call chain in out_of_memory() function. If virtio balloon could release some memory, it will make the system return and retry the allocation that forced the out of memory killer to run. This behavior should be enabled if and only if appropriate feature bit is set on the device. It is off by default. This functionality was recently merged into vanilla Linux. commit 5a10b7dbf904bfe01bb9fcc6298f7df09eed77d5 Author: Raushaniya Maksudova <rmaksudova@parallels.com> Date: Mon Nov 10 09:36:29 2014 +1030 This patch adds respective control bits into QEMU. It introduces deflate-on-oom option for balloon device which does the trick. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Raushaniya Maksudova <rmaksudova@parallels.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: James Bottomley <JBottomley@Odin.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-15 13:52:52 +03:00
DEFINE_PROP_BIT("deflate-on-oom", VirtIOBalloon, host_features,
VIRTIO_BALLOON_F_DEFLATE_ON_OOM, false),
DEFINE_PROP_END_OF_LIST(),
};
static void virtio_balloon_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
dc->props = virtio_balloon_properties;
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
vdc->realize = virtio_balloon_device_realize;
vdc->unrealize = virtio_balloon_device_unrealize;
vdc->reset = virtio_balloon_device_reset;
vdc->get_config = virtio_balloon_get_config;
vdc->set_config = virtio_balloon_set_config;
vdc->get_features = virtio_balloon_get_features;
vdc->save = virtio_balloon_save_device;
vdc->load = virtio_balloon_load_device;
}
static const TypeInfo virtio_balloon_info = {
.name = TYPE_VIRTIO_BALLOON,
.parent = TYPE_VIRTIO_DEVICE,
.instance_size = sizeof(VirtIOBalloon),
.instance_init = virtio_balloon_instance_init,
.class_init = virtio_balloon_class_init,
};
static void virtio_register_types(void)
{
type_register_static(&virtio_balloon_info);
}
type_init(virtio_register_types)