qemu/include/hw/ppc/pnv.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

247 lines
8.6 KiB
C
Raw Normal View History

ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
/*
* QEMU PowerPC PowerNV various definitions
*
* Copyright (c) 2014-2016 BenH, IBM Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef PPC_PNV_H
#define PPC_PNV_H
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#include "cpu.h"
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#include "hw/boards.h"
#include "hw/sysbus.h"
#include "hw/ipmi/ipmi.h"
#include "hw/ppc/pnv_pnor.h"
#define TYPE_PNV_CHIP "pnv-chip"
typedef struct PnvChip PnvChip;
typedef struct Pnv8Chip Pnv8Chip;
typedef struct Pnv9Chip Pnv9Chip;
typedef struct Pnv10Chip Pnv10Chip;
#define PNV_CHIP_TYPE_SUFFIX "-" TYPE_PNV_CHIP
#define PNV_CHIP_TYPE_NAME(cpu_model) cpu_model PNV_CHIP_TYPE_SUFFIX
#define TYPE_PNV_CHIP_POWER8E PNV_CHIP_TYPE_NAME("power8e_v2.1")
DECLARE_INSTANCE_CHECKER(PnvChip, PNV_CHIP_POWER8E,
TYPE_PNV_CHIP_POWER8E)
#define TYPE_PNV_CHIP_POWER8 PNV_CHIP_TYPE_NAME("power8_v2.0")
DECLARE_INSTANCE_CHECKER(PnvChip, PNV_CHIP_POWER8,
TYPE_PNV_CHIP_POWER8)
#define TYPE_PNV_CHIP_POWER8NVL PNV_CHIP_TYPE_NAME("power8nvl_v1.0")
DECLARE_INSTANCE_CHECKER(PnvChip, PNV_CHIP_POWER8NVL,
TYPE_PNV_CHIP_POWER8NVL)
#define TYPE_PNV_CHIP_POWER9 PNV_CHIP_TYPE_NAME("power9_v2.0")
DECLARE_INSTANCE_CHECKER(PnvChip, PNV_CHIP_POWER9,
TYPE_PNV_CHIP_POWER9)
#define TYPE_PNV_CHIP_POWER10 PNV_CHIP_TYPE_NAME("power10_v2.0")
DECLARE_INSTANCE_CHECKER(PnvChip, PNV_CHIP_POWER10,
TYPE_PNV_CHIP_POWER10)
PowerPCCPU *pnv_chip_find_cpu(PnvChip *chip, uint32_t pir);
typedef struct PnvPHB PnvPHB;
#define TYPE_PNV_MACHINE MACHINE_TYPE_NAME("powernv")
typedef struct PnvMachineClass PnvMachineClass;
typedef struct PnvMachineState PnvMachineState;
DECLARE_OBJ_CHECKERS(PnvMachineState, PnvMachineClass,
PNV_MACHINE, TYPE_PNV_MACHINE)
struct PnvMachineClass {
/*< private >*/
MachineClass parent_class;
/*< public >*/
const char *compat;
int compat_size;
void (*dt_power_mgt)(PnvMachineState *pnv, void *fdt);
};
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
struct PnvMachineState {
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
/*< private >*/
MachineState parent_obj;
uint32_t initrd_base;
long initrd_size;
uint32_t num_chips;
PnvChip **chips;
ISABus *isa_bus;
uint32_t cpld_irqstate;
IPMIBmc *bmc;
Notifier powerdown_notifier;
PnvPnor *pnor;
hwaddr fw_load_addr;
};
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
PnvChip *pnv_get_chip(PnvMachineState *pnv, uint32_t chip_id);
PnvChip *pnv_chip_add_phb(PnvChip *chip, PnvPHB *phb);
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
#define PNV_FDT_ADDR 0x01000000
#define PNV_TIMEBASE_FREQ 512000000ULL
ppc/pnv: add skeleton PowerNV platform The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:35 +03:00
/*
* BMC helpers
*/
void pnv_dt_bmc_sensors(IPMIBmc *bmc, void *fdt);
void pnv_bmc_powerdown(IPMIBmc *bmc);
IPMIBmc *pnv_bmc_create(PnvPnor *pnor);
IPMIBmc *pnv_bmc_find(Error **errp);
void pnv_bmc_set_pnor(IPMIBmc *bmc, PnvPnor *pnor);
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
/*
* POWER8 MMIO base addresses
*/
#define PNV_XSCOM_SIZE 0x800000000ull
#define PNV_XSCOM_BASE(chip) \
(0x0003fc0000000000ull + ((uint64_t)(chip)->chip_id) * PNV_XSCOM_SIZE)
ppc/pnv: add XSCOM infrastructure On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves as a backbone to connect different units of the system. The host firmware connects to the PIB through a bridge unit, the Alter-Display-Unit (ADU), which gives him access to all the chiplets on the PCB network (Pervasive Connect Bus), the PIB acting as the root of this network. XSCOM (serial communication) is the interface to the sideband bus provided by the POWER8 pervasive unit to read and write to chiplets resources. This is needed by the host firmware, OPAL and to a lesser extent, Linux. This is among others how the PCI Host bridges get configured at boot or how the LPC bus is accessed. To represent the ADU of a real system, we introduce a specific AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The translation of an XSCOM address into a PCB register address is slightly different between the P9 and the P8. This is handled before the dispatch using a 8byte alignment for all. To customize the device tree, a QOM InterfaceClass, PnvXScomInterface, is provided with a populate() handler. The chip populates the device tree by simply looping on its children. Therefore, each model needing custom nodes should not forget to declare itself as a child at instantiation time. Based on previous work done by : Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Added cpu parameter to xscom_complete()] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 12:46:40 +03:00
#define PNV_OCC_COMMON_AREA_SIZE 0x0000000000800000ull
#define PNV_OCC_COMMON_AREA_BASE 0x7fff800000ull
#define PNV_OCC_SENSOR_BASE(chip) (PNV_OCC_COMMON_AREA_BASE + \
PNV_OCC_SENSOR_DATA_BLOCK_BASE((chip)->chip_id))
#define PNV_HOMER_SIZE 0x0000000000400000ull
#define PNV_HOMER_BASE(chip) \
(0x7ffd800000ull + ((uint64_t)(chip)->chip_id) * PNV_HOMER_SIZE)
/*
* XSCOM 0x20109CA defines the ICP BAR:
*
* 0:29 : bits 14 to 43 of address to define 1 MB region.
* 30 : 1 to enable ICP to receive loads/stores against its BAR region
* 31:63 : Constant 0
*
* Usually defined as :
*
* 0xffffe00200000000 -> 0x0003ffff80000000
* 0xffffe00600000000 -> 0x0003ffff80100000
* 0xffffe02200000000 -> 0x0003ffff80800000
* 0xffffe02600000000 -> 0x0003ffff80900000
*/
#define PNV_ICP_SIZE 0x0000000000100000ull
#define PNV_ICP_BASE(chip) \
(0x0003ffff80000000ull + (uint64_t) (chip)->chip_id * PNV_ICP_SIZE)
#define PNV_PSIHB_SIZE 0x0000000000100000ull
#define PNV_PSIHB_BASE(chip) \
(0x0003fffe80000000ull + (uint64_t)(chip)->chip_id * PNV_PSIHB_SIZE)
#define PNV_PSIHB_FSP_SIZE 0x0000000100000000ull
#define PNV_PSIHB_FSP_BASE(chip) \
(0x0003ffe000000000ull + (uint64_t)(chip)->chip_id * \
PNV_PSIHB_FSP_SIZE)
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
/*
* POWER9 MMIO base addresses
*/
#define PNV9_CHIP_BASE(chip, base) \
((base) + ((uint64_t) (chip)->chip_id << 42))
#define PNV9_XIVE_VC_SIZE 0x0000008000000000ull
#define PNV9_XIVE_VC_BASE(chip) PNV9_CHIP_BASE(chip, 0x0006010000000000ull)
#define PNV9_XIVE_PC_SIZE 0x0000001000000000ull
#define PNV9_XIVE_PC_BASE(chip) PNV9_CHIP_BASE(chip, 0x0006018000000000ull)
#define PNV9_LPCM_SIZE 0x0000000100000000ull
#define PNV9_LPCM_BASE(chip) PNV9_CHIP_BASE(chip, 0x0006030000000000ull)
#define PNV9_PSIHB_SIZE 0x0000000000100000ull
#define PNV9_PSIHB_BASE(chip) PNV9_CHIP_BASE(chip, 0x0006030203000000ull)
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
#define PNV9_XIVE_IC_SIZE 0x0000000000080000ull
#define PNV9_XIVE_IC_BASE(chip) PNV9_CHIP_BASE(chip, 0x0006030203100000ull)
#define PNV9_XIVE_TM_SIZE 0x0000000000040000ull
#define PNV9_XIVE_TM_BASE(chip) PNV9_CHIP_BASE(chip, 0x0006030203180000ull)
#define PNV9_PSIHB_ESB_SIZE 0x0000000000010000ull
#define PNV9_PSIHB_ESB_BASE(chip) PNV9_CHIP_BASE(chip, 0x00060302031c0000ull)
ppc/pnv: add a XIVE interrupt controller model for POWER9 This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-06 11:50:11 +03:00
#define PNV9_XSCOM_SIZE 0x0000000400000000ull
#define PNV9_XSCOM_BASE(chip) PNV9_CHIP_BASE(chip, 0x00603fc00000000ull)
#define PNV9_OCC_COMMON_AREA_SIZE 0x0000000000800000ull
#define PNV9_OCC_COMMON_AREA_BASE 0x203fff800000ull
#define PNV9_OCC_SENSOR_BASE(chip) (PNV9_OCC_COMMON_AREA_BASE + \
PNV_OCC_SENSOR_DATA_BLOCK_BASE((chip)->chip_id))
#define PNV9_HOMER_SIZE 0x0000000000400000ull
#define PNV9_HOMER_BASE(chip) \
(0x203ffd800000ull + ((uint64_t)(chip)->chip_id) * PNV9_HOMER_SIZE)
/*
* POWER10 MMIO base addresses - 16TB stride per chip
*/
#define PNV10_CHIP_BASE(chip, base) \
((base) + ((uint64_t) (chip)->chip_id << 44))
#define PNV10_XSCOM_SIZE 0x0000000400000000ull
#define PNV10_XSCOM_BASE(chip) PNV10_CHIP_BASE(chip, 0x00603fc00000000ull)
#define PNV10_LPCM_SIZE 0x0000000100000000ull
#define PNV10_LPCM_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006030000000000ull)
ppc/pnv: Add a XIVE2 controller to the POWER10 chip The XIVE2 interrupt controller of the POWER10 processor follows the same logic than on POWER9 but the HW interface has been largely reviewed. It has a new register interface, different BARs, extra VSDs, new layout for the XIVE2 structures, and a set of new features which are described below. This is a model of the POWER10 XIVE2 interrupt controller for the PowerNV machine. It focuses primarily on the needs of the skiboot firmware but some initial hypervisor support is implemented for KVM use (escalation). Support for new features will be implemented in time and will require new support from the OS. * XIVE2 BARS The interrupt controller BARs have a different layout outlined below. Each sub-engine has now own its range and the indirect TIMA access was replaced with a set of pages, one per CPU, under the IC BAR: - IC BAR (Interrupt Controller) . 4 pages, one per sub-engine . 128 indirect TIMA pages - TM BAR (Thread Interrupt Management Area) . 4 pages - ESB BAR (ESB pages for IPIs) . up to 1TB - END BAR (ESB pages for ENDs) . up to 2TB - NVC BAR (Notification Virtual Crowd) . up to 128 - NVPG BAR (Notification Virtual Process and Group) . up to 1TB - Direct mapped Thread Context Area (reads & writes) OPAL does not use the grouping and crowd capability. * Virtual Structure Tables XIVE2 adds new tables types and also changes the field layout of the END and NVP Virtualization Structure Descriptors. - EAS - END new layout - NVT was splitted in : . NVP (Processor), 32B . NVG (Group), 32B . NVC (Crowd == P9 block group) 32B - IC for remote configuration - SYNC for cache injection - ERQ for event input queue The setup is slighly different on XIVE2 because the indexing has changed for some of the tables, block ID or the chip topology ID can be used. * XIVE2 features SCOM and MMIO registers have a new layout and XIVE2 adds a new global capability and configuration registers. The lowlevel hardware offers a set of new features among which : - a configurable number of priorities : 1 - 8 - StoreEOI with load-after-store ordering is activated by default - Gen2 TIMA layout - A P9-compat mode, or Gen1, TIMA toggle bit for SW compatibility - increase to 24bit for VP number Other features will have some impact on the Hypervisor and guest OS when activated, but this is not required for initial support of the controller. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-02 08:51:38 +03:00
#define PNV10_XIVE2_IC_SIZE 0x0000000002000000ull
#define PNV10_XIVE2_IC_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006030200000000ull)
#define PNV10_PSIHB_ESB_SIZE 0x0000000000100000ull
#define PNV10_PSIHB_ESB_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006030202000000ull)
#define PNV10_PSIHB_SIZE 0x0000000000100000ull
#define PNV10_PSIHB_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006030203000000ull)
ppc/pnv: Add a XIVE2 controller to the POWER10 chip The XIVE2 interrupt controller of the POWER10 processor follows the same logic than on POWER9 but the HW interface has been largely reviewed. It has a new register interface, different BARs, extra VSDs, new layout for the XIVE2 structures, and a set of new features which are described below. This is a model of the POWER10 XIVE2 interrupt controller for the PowerNV machine. It focuses primarily on the needs of the skiboot firmware but some initial hypervisor support is implemented for KVM use (escalation). Support for new features will be implemented in time and will require new support from the OS. * XIVE2 BARS The interrupt controller BARs have a different layout outlined below. Each sub-engine has now own its range and the indirect TIMA access was replaced with a set of pages, one per CPU, under the IC BAR: - IC BAR (Interrupt Controller) . 4 pages, one per sub-engine . 128 indirect TIMA pages - TM BAR (Thread Interrupt Management Area) . 4 pages - ESB BAR (ESB pages for IPIs) . up to 1TB - END BAR (ESB pages for ENDs) . up to 2TB - NVC BAR (Notification Virtual Crowd) . up to 128 - NVPG BAR (Notification Virtual Process and Group) . up to 1TB - Direct mapped Thread Context Area (reads & writes) OPAL does not use the grouping and crowd capability. * Virtual Structure Tables XIVE2 adds new tables types and also changes the field layout of the END and NVP Virtualization Structure Descriptors. - EAS - END new layout - NVT was splitted in : . NVP (Processor), 32B . NVG (Group), 32B . NVC (Crowd == P9 block group) 32B - IC for remote configuration - SYNC for cache injection - ERQ for event input queue The setup is slighly different on XIVE2 because the indexing has changed for some of the tables, block ID or the chip topology ID can be used. * XIVE2 features SCOM and MMIO registers have a new layout and XIVE2 adds a new global capability and configuration registers. The lowlevel hardware offers a set of new features among which : - a configurable number of priorities : 1 - 8 - StoreEOI with load-after-store ordering is activated by default - Gen2 TIMA layout - A P9-compat mode, or Gen1, TIMA toggle bit for SW compatibility - increase to 24bit for VP number Other features will have some impact on the Hypervisor and guest OS when activated, but this is not required for initial support of the controller. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-02 08:51:38 +03:00
#define PNV10_XIVE2_TM_SIZE 0x0000000000040000ull
#define PNV10_XIVE2_TM_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006030203180000ull)
#define PNV10_XIVE2_NVC_SIZE 0x0000000008000000ull
#define PNV10_XIVE2_NVC_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006030208000000ull)
#define PNV10_XIVE2_NVPG_SIZE 0x0000010000000000ull
#define PNV10_XIVE2_NVPG_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006040000000000ull)
#define PNV10_XIVE2_ESB_SIZE 0x0000010000000000ull
#define PNV10_XIVE2_ESB_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006050000000000ull)
#define PNV10_XIVE2_END_SIZE 0x0000020000000000ull
#define PNV10_XIVE2_END_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006060000000000ull)
#define PNV10_OCC_COMMON_AREA_SIZE 0x0000000000800000ull
#define PNV10_OCC_COMMON_AREA_BASE 0x300fff800000ull
#define PNV10_OCC_SENSOR_BASE(chip) (PNV10_OCC_COMMON_AREA_BASE + \
PNV_OCC_SENSOR_DATA_BLOCK_BASE((chip)->chip_id))
#define PNV10_HOMER_SIZE 0x0000000000400000ull
#define PNV10_HOMER_BASE(chip) \
(0x300ffd800000ll + ((uint64_t)(chip)->chip_id) * PNV10_HOMER_SIZE)
#endif /* PPC_PNV_H */