mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
318df7238b
qemu/target/riscv/op_helper.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

545 lines
16 KiB
C
Raw Normal View History

RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
/*
* RISC-V Emulation Helpers for QEMU.
*
* Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
* Copyright (c) 2017-2018 SiFive, Inc.
target/riscv: implement Zicboz extension The RISC-V base cache management operation (CBO) ISA extension has been ratified. It defines three extensions: Cache-Block Management, Cache-Block Prefetch and Cache-Block Zero. More information about the spec can be found at [1]. Let's start by implementing the Cache-Block Zero extension, Zicboz. It uses the cbo.zero instruction that, as with all CBO instructions that will be added later, needs to be implemented in an overlap group with the LQ instruction due to overlapping patterns. cbo.zero throws a Illegal Instruction/Virtual Instruction exception depending on CSR state. This is also the case for the remaining cbo instructions we're going to add next, so create a check_zicbo_envcfg() that will be used by all Zicbo[mz] instructions. [1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Christoph Muellner <cmuellner@linux.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-24 16:25:34 +03:00
* Copyright (c) 2022 VRULL GmbH
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "cpu.h"
target/riscv: Reduce overhead of MSTATUS_SUM change Kernel needs to access user mode memory e.g. during syscalls, the window is usually opened up for a very limited time through MSTATUS.SUM, the overhead is too much if tlb_flush() gets called for every SUM change. This patch creates a separate MMU index for S+SUM, so that it's not necessary to flush tlb anymore when SUM changes. This is similar to how ARM handles Privileged Access Never (PAN). Result of 'pipe 10' from unixbench boosts from 223656 to 1705006. Many other syscalls benefit a lot from this too. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Fei Wu <fei2.wu@intel.com> Message-Id: <20230324054154.414846-3-fei2.wu@intel.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-8-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-8-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:15 +03:00
#include "internals.h"
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
#include "qemu/main-loop.h"
#include "exec/exec-all.h"
#include "exec/helper-proto.h"
/* Exceptions processing helpers */
compiler.h: replace QEMU_NORETURN with G_NORETURN G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in glib-compat. Note that this attribute must be placed before the function declaration (bringing a bit of consistency in qemu codebase usage). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Warner Losh <imp@bsdimp.com> Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
2022-04-20 16:26:02 +03:00
G_NORETURN void riscv_raise_exception(CPURISCVState *env,
uint32_t exception, uintptr_t pc)
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
{
target/riscv: Use env_cpu, env_archcpu Cleanup in the boilerplate that each target must define. Replace riscv_env_get_cpu with env_archcpu. The combination CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-23 05:11:37 +03:00
CPUState *cs = env_cpu(env);
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
cs->exception_index = exception;
cpu_loop_exit_restore(cs, pc);
}
void helper_raise_exception(CPURISCVState *env, uint32_t exception)
{
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_raise_exception(env, exception, 0);
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
target/riscv: Reorg csr instructions Introduce csrr and csrw helpers, for read-only and write-only insns. Note that we do not properly implement this in riscv_csrrw, in that we cannot distinguish true read-only (rs1 == 0) from any other zero write_mask another source register -- this should still raise an exception for read-only registers. Only issue gen_io_start for CF_USE_ICOUNT. Use ctx->zero for csrrc. Use get_gpr and dest_gpr. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210823195529.560295-19-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-23 22:55:23 +03:00
target_ulong helper_csrr(CPURISCVState *env, int csr)
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
{
target/riscv: rvk: add CSR support for Zkr - add SEED CSR which must be accessed with a read-write instruction: A read-only instruction such as CSRRS/CSRRC with rs1=x0 or CSRRSI/CSRRCI with uimm=0 will raise an illegal instruction exception. - add USEED, SSEED fields for MSECCFG CSR Co-authored-by: Ruibo Lu <luruibo2000@163.com> Co-authored-by: Zewen Ye <lustrew@foxmail.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220423023510.30794-13-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-23 05:35:08 +03:00
/*
* The seed CSR must be accessed with a read-write instruction. A
* read-only instruction such as CSRRS/CSRRC with rs1=x0 or CSRRSI/
* CSRRCI with uimm=0 will raise an illegal instruction exception.
*/
if (csr == CSR_SEED) {
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
}
RISC-V: Implement modular CSR helper interface Previous CSR code uses csr_read_helper and csr_write_helper to update CSR registers however this interface prevents atomic read/modify/write CSR operations; in addition there is no trap-free method to access to CSRs due to the monolithic CSR functions call longjmp. The current iCSR interface is not safe to be called by target/riscv/gdbstub.c as privilege checks or missing CSRs may call longjmp to generate exceptions. It needs to indicate existence so traps can be generated in the CSR instruction helpers. This commit moves CSR access from the monolithic switch statements in target/riscv/op_helper.c into modular read/write functions in target/riscv/csr.c using a new function pointer table for dispatch (which can later be used to allow CPUs to hook up model specific CSRs). A read/modify/write interface is added to support atomic CSR operations and a non-trapping interface is added to allow exception-free access to CSRs by the debugger. The CSR functions and CSR dispatch table are ordered to match The RISC-V Instruction Set Manual, Volume II: Privileged Architecture Version 1.10, 2.2 CSR Listing. An API is added to allow derived cpu instances to modify or implement new CSR operations. Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-05 02:23:55 +03:00
target_ulong val = 0;
target/riscv: Reorg csr instructions Introduce csrr and csrw helpers, for read-only and write-only insns. Note that we do not properly implement this in riscv_csrrw, in that we cannot distinguish true read-only (rs1 == 0) from any other zero write_mask another source register -- this should still raise an exception for read-only registers. Only issue gen_io_start for CF_USE_ICOUNT. Use ctx->zero for csrrc. Use get_gpr and dest_gpr. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210823195529.560295-19-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-23 22:55:23 +03:00
RISCVException ret = riscv_csrrw(env, csr, &val, 0, 0);
target/riscv: Return the exception from invalid CSR accesses When performing a CSR access let's return a negative exception value on an error instead of -1. This will allow us to specify the exception in future patches. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com Message-Id: <a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:46 +03:00
target/riscv: Use RISCVException enum for CSR access Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 302b208f40373557fa11b351b5c9f43039ca8ea3.1617290165.git.alistair.francis@wdc.com
2021-04-01 18:18:07 +03:00
if (ret != RISCV_EXCP_NONE) {
riscv_raise_exception(env, ret, GETPC());
RISC-V: Implement modular CSR helper interface Previous CSR code uses csr_read_helper and csr_write_helper to update CSR registers however this interface prevents atomic read/modify/write CSR operations; in addition there is no trap-free method to access to CSRs due to the monolithic CSR functions call longjmp. The current iCSR interface is not safe to be called by target/riscv/gdbstub.c as privilege checks or missing CSRs may call longjmp to generate exceptions. It needs to indicate existence so traps can be generated in the CSR instruction helpers. This commit moves CSR access from the monolithic switch statements in target/riscv/op_helper.c into modular read/write functions in target/riscv/csr.c using a new function pointer table for dispatch (which can later be used to allow CPUs to hook up model specific CSRs). A read/modify/write interface is added to support atomic CSR operations and a non-trapping interface is added to allow exception-free access to CSRs by the debugger. The CSR functions and CSR dispatch table are ordered to match The RISC-V Instruction Set Manual, Volume II: Privileged Architecture Version 1.10, 2.2 CSR Listing. An API is added to allow derived cpu instances to modify or implement new CSR operations. Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-05 02:23:55 +03:00
}
return val;
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
target/riscv: Reorg csr instructions Introduce csrr and csrw helpers, for read-only and write-only insns. Note that we do not properly implement this in riscv_csrrw, in that we cannot distinguish true read-only (rs1 == 0) from any other zero write_mask another source register -- this should still raise an exception for read-only registers. Only issue gen_io_start for CF_USE_ICOUNT. Use ctx->zero for csrrc. Use get_gpr and dest_gpr. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210823195529.560295-19-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-23 22:55:23 +03:00
void helper_csrw(CPURISCVState *env, int csr, target_ulong src)
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
{
target/riscv: Adjust csr write mask with XLEN Write mask is representing the bits we care about. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220120122050.41546-11-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-20 15:20:37 +03:00
target_ulong mask = env->xl == MXL_RV32 ? UINT32_MAX : (target_ulong)-1;
RISCVException ret = riscv_csrrw(env, csr, NULL, src, mask);
target/riscv: Return the exception from invalid CSR accesses When performing a CSR access let's return a negative exception value on an error instead of -1. This will allow us to specify the exception in future patches. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com Message-Id: <a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:46 +03:00
target/riscv: Use RISCVException enum for CSR access Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 302b208f40373557fa11b351b5c9f43039ca8ea3.1617290165.git.alistair.francis@wdc.com
2021-04-01 18:18:07 +03:00
if (ret != RISCV_EXCP_NONE) {
riscv_raise_exception(env, ret, GETPC());
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
}
target/riscv: Reorg csr instructions Introduce csrr and csrw helpers, for read-only and write-only insns. Note that we do not properly implement this in riscv_csrrw, in that we cannot distinguish true read-only (rs1 == 0) from any other zero write_mask another source register -- this should still raise an exception for read-only registers. Only issue gen_io_start for CF_USE_ICOUNT. Use ctx->zero for csrrc. Use get_gpr and dest_gpr. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210823195529.560295-19-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-23 22:55:23 +03:00
target_ulong helper_csrrw(CPURISCVState *env, int csr,
target_ulong src, target_ulong write_mask)
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
{
RISC-V: Implement modular CSR helper interface Previous CSR code uses csr_read_helper and csr_write_helper to update CSR registers however this interface prevents atomic read/modify/write CSR operations; in addition there is no trap-free method to access to CSRs due to the monolithic CSR functions call longjmp. The current iCSR interface is not safe to be called by target/riscv/gdbstub.c as privilege checks or missing CSRs may call longjmp to generate exceptions. It needs to indicate existence so traps can be generated in the CSR instruction helpers. This commit moves CSR access from the monolithic switch statements in target/riscv/op_helper.c into modular read/write functions in target/riscv/csr.c using a new function pointer table for dispatch (which can later be used to allow CPUs to hook up model specific CSRs). A read/modify/write interface is added to support atomic CSR operations and a non-trapping interface is added to allow exception-free access to CSRs by the debugger. The CSR functions and CSR dispatch table are ordered to match The RISC-V Instruction Set Manual, Volume II: Privileged Architecture Version 1.10, 2.2 CSR Listing. An API is added to allow derived cpu instances to modify or implement new CSR operations. Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-05 02:23:55 +03:00
target_ulong val = 0;
target/riscv: Reorg csr instructions Introduce csrr and csrw helpers, for read-only and write-only insns. Note that we do not properly implement this in riscv_csrrw, in that we cannot distinguish true read-only (rs1 == 0) from any other zero write_mask another source register -- this should still raise an exception for read-only registers. Only issue gen_io_start for CF_USE_ICOUNT. Use ctx->zero for csrrc. Use get_gpr and dest_gpr. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210823195529.560295-19-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-23 22:55:23 +03:00
RISCVException ret = riscv_csrrw(env, csr, &val, src, write_mask);
target/riscv: Return the exception from invalid CSR accesses When performing a CSR access let's return a negative exception value on an error instead of -1. This will allow us to specify the exception in future patches. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com Message-Id: <a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:46 +03:00
target/riscv: Use RISCVException enum for CSR access Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 302b208f40373557fa11b351b5c9f43039ca8ea3.1617290165.git.alistair.francis@wdc.com
2021-04-01 18:18:07 +03:00
if (ret != RISCV_EXCP_NONE) {
riscv_raise_exception(env, ret, GETPC());
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
RISC-V: Implement modular CSR helper interface Previous CSR code uses csr_read_helper and csr_write_helper to update CSR registers however this interface prevents atomic read/modify/write CSR operations; in addition there is no trap-free method to access to CSRs due to the monolithic CSR functions call longjmp. The current iCSR interface is not safe to be called by target/riscv/gdbstub.c as privilege checks or missing CSRs may call longjmp to generate exceptions. It needs to indicate existence so traps can be generated in the CSR instruction helpers. This commit moves CSR access from the monolithic switch statements in target/riscv/op_helper.c into modular read/write functions in target/riscv/csr.c using a new function pointer table for dispatch (which can later be used to allow CPUs to hook up model specific CSRs). A read/modify/write interface is added to support atomic CSR operations and a non-trapping interface is added to allow exception-free access to CSRs by the debugger. The CSR functions and CSR dispatch table are ordered to match The RISC-V Instruction Set Manual, Volume II: Privileged Architecture Version 1.10, 2.2 CSR Listing. An API is added to allow derived cpu instances to modify or implement new CSR operations. Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-05 02:23:55 +03:00
return val;
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
target/riscv: helper functions to wrap calls to 128-bit csr insns Given the side effects they have, the csr instructions are realized as helpers. We extend this existing infrastructure for 128-bit sized csr. We return 128-bit values using the same approach as for div/rem. Theses helpers all call a unique function that is currently a fallback on the 64-bit version. The trans_csrxx functions supporting 128-bit are yet to be implemented. Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr> Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220106210108.138226-17-frederic.petrot@univ-grenoble-alpes.fr Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-07 00:01:06 +03:00
target_ulong helper_csrr_i128(CPURISCVState *env, int csr)
{
Int128 rv = int128_zero();
RISCVException ret = riscv_csrrw_i128(env, csr, &rv,
int128_zero(),
int128_zero());
if (ret != RISCV_EXCP_NONE) {
riscv_raise_exception(env, ret, GETPC());
}
env->retxh = int128_gethi(rv);
return int128_getlo(rv);
}
void helper_csrw_i128(CPURISCVState *env, int csr,
target_ulong srcl, target_ulong srch)
{
RISCVException ret = riscv_csrrw_i128(env, csr, NULL,
int128_make128(srcl, srch),
UINT128_MAX);
if (ret != RISCV_EXCP_NONE) {
riscv_raise_exception(env, ret, GETPC());
}
}
target_ulong helper_csrrw_i128(CPURISCVState *env, int csr,
target_ulong srcl, target_ulong srch,
target_ulong maskl, target_ulong maskh)
{
Int128 rv = int128_zero();
RISCVException ret = riscv_csrrw_i128(env, csr, &rv,
int128_make128(srcl, srch),
int128_make128(maskl, maskh));
if (ret != RISCV_EXCP_NONE) {
riscv_raise_exception(env, ret, GETPC());
}
env->retxh = int128_gethi(rv);
return int128_getlo(rv);
}
target/riscv: implement Zicboz extension The RISC-V base cache management operation (CBO) ISA extension has been ratified. It defines three extensions: Cache-Block Management, Cache-Block Prefetch and Cache-Block Zero. More information about the spec can be found at [1]. Let's start by implementing the Cache-Block Zero extension, Zicboz. It uses the cbo.zero instruction that, as with all CBO instructions that will be added later, needs to be implemented in an overlap group with the LQ instruction due to overlapping patterns. cbo.zero throws a Illegal Instruction/Virtual Instruction exception depending on CSR state. This is also the case for the remaining cbo instructions we're going to add next, so create a check_zicbo_envcfg() that will be used by all Zicbo[mz] instructions. [1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Christoph Muellner <cmuellner@linux.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-24 16:25:34 +03:00
/*
* check_zicbo_envcfg
*
* Raise virtual exceptions and illegal instruction exceptions for
* Zicbo[mz] instructions based on the settings of [mhs]envcfg as
* specified in section 2.5.1 of the CMO specification.
*/
static void check_zicbo_envcfg(CPURISCVState *env, target_ulong envbits,
uintptr_t ra)
{
#ifndef CONFIG_USER_ONLY
if ((env->priv < PRV_M) && !get_field(env->menvcfg, envbits)) {
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, ra);
}
target/riscv: Remove riscv_cpu_virt_enabled() Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-05 11:58:10 +03:00
if (env->virt_enabled &&
target/riscv: Use PRV_RESERVED instead of PRV_H PRV_H has no real meaning, but just a reserved privilege mode currently. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230407014743.18779-3-liweiwei@iscas.ac.cn> [ Changes by AF: - Convert one missing use of PRV_H ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-07 04:47:42 +03:00
(((env->priv <= PRV_S) && !get_field(env->henvcfg, envbits)) ||
target/riscv: implement Zicboz extension The RISC-V base cache management operation (CBO) ISA extension has been ratified. It defines three extensions: Cache-Block Management, Cache-Block Prefetch and Cache-Block Zero. More information about the spec can be found at [1]. Let's start by implementing the Cache-Block Zero extension, Zicboz. It uses the cbo.zero instruction that, as with all CBO instructions that will be added later, needs to be implemented in an overlap group with the LQ instruction due to overlapping patterns. cbo.zero throws a Illegal Instruction/Virtual Instruction exception depending on CSR state. This is also the case for the remaining cbo instructions we're going to add next, so create a check_zicbo_envcfg() that will be used by all Zicbo[mz] instructions. [1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Christoph Muellner <cmuellner@linux.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-24 16:25:34 +03:00
((env->priv < PRV_S) && !get_field(env->senvcfg, envbits)))) {
riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, ra);
}
if ((env->priv < PRV_S) && !get_field(env->senvcfg, envbits)) {
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, ra);
}
#endif
}
void helper_cbo_zero(CPURISCVState *env, target_ulong address)
{
RISCVCPU *cpu = env_archcpu(env);
uint16_t cbozlen = cpu->cfg.cboz_blocksize;
int mmu_idx = cpu_mmu_index(env, false);
uintptr_t ra = GETPC();
void *mem;
check_zicbo_envcfg(env, MENVCFG_CBZE, ra);
/* Mask off low-bits to align-down to the cache-block. */
address &= ~(cbozlen - 1);
/*
* cbo.zero requires MMU_DATA_STORE access. Do a probe_write()
* to raise any exceptions, including PMP.
*/
mem = probe_write(env, address, cbozlen, mmu_idx, ra);
if (likely(mem)) {
memset(mem, 0, cbozlen);
} else {
/*
* This means that we're dealing with an I/O page. Section 4.2
* of cmobase v1.0.1 says:
*
* "Cache-block zero instructions store zeros independently
* of whether data from the underlying memory locations are
* cacheable."
*
* Write zeros in address + cbozlen regardless of not being
* a RAM page.
*/
for (int i = 0; i < cbozlen; i++) {
cpu_stb_mmuidx_ra(env, address + i, 0, mmu_idx, ra);
}
}
}
target/riscv: implement Zicbom extension Zicbom is the Cache-Block Management extension defined in the already ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1]. The extension contains three instructions: cbo.clean, cbo.flush and cbo.inval. All of them must be implemented in the same group as LQ and cbo.zero due to overlapping patterns. All these instructions can throw a Illegal Instruction/Virtual Instruction exception, similar to the existing cbo.zero. The same check_zicbo_envcfg() is used to handle these exceptions. Aside from that, these instructions also need to handle page faults and guest page faults. This is done in a new check_zicbom_access() helper. As with Zicboz, the cache block size for Zicbom is also configurable. Note that the spec determines that Zicbo[mp] and Zicboz can have different cache sizes (Section 2.7 of [1]), so we also include a 'cbom_blocksize' to go along with the existing 'cboz_blocksize'. They are set to the same size, so unless users want to play around with the settings both sizes will be the same. [1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu> Signed-off-by: Christoph Muellner <cmuellner@linux.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230224132536.552293-4-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-24 16:25:35 +03:00
/*
* check_zicbom_access
*
* Check access permissions (LOAD, STORE or FETCH as specified in
* section 2.5.2 of the CMO specification) for Zicbom, raising
* either store page-fault (non-virtualized) or store guest-page
* fault (virtualized).
*/
static void check_zicbom_access(CPURISCVState *env,
target_ulong address,
uintptr_t ra)
{
RISCVCPU *cpu = env_archcpu(env);
int mmu_idx = cpu_mmu_index(env, false);
uint16_t cbomlen = cpu->cfg.cbom_blocksize;
void *phost;
int ret;
/* Mask off low-bits to align-down to the cache-block. */
address &= ~(cbomlen - 1);
/*
* Section 2.5.2 of cmobase v1.0.1:
*
* "A cache-block management instruction is permitted to
* access the specified cache block whenever a load instruction
* or store instruction is permitted to access the corresponding
* physical addresses. If neither a load instruction nor store
* instruction is permitted to access the physical addresses,
* but an instruction fetch is permitted to access the physical
* addresses, whether a cache-block management instruction is
* permitted to access the cache block is UNSPECIFIED."
*/
ret = probe_access_flags(env, address, cbomlen, MMU_DATA_LOAD,
mmu_idx, true, &phost, ra);
if (ret != TLB_INVALID_MASK) {
/* Success: readable */
return;
}
/*
* Since not readable, must be writable. On failure, store
* fault/store guest amo fault will be raised by
* riscv_cpu_tlb_fill(). PMP exceptions will be caught
* there as well.
*/
probe_write(env, address, cbomlen, mmu_idx, ra);
}
void helper_cbo_clean_flush(CPURISCVState *env, target_ulong address)
{
uintptr_t ra = GETPC();
check_zicbo_envcfg(env, MENVCFG_CBCFE, ra);
check_zicbom_access(env, address, ra);
/* We don't emulate the cache-hierarchy, so we're done. */
}
void helper_cbo_inval(CPURISCVState *env, target_ulong address)
{
uintptr_t ra = GETPC();
check_zicbo_envcfg(env, MENVCFG_CBIE, ra);
check_zicbom_access(env, address, ra);
/* We don't emulate the cache-hierarchy, so we're done. */
}
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
#ifndef CONFIG_USER_ONLY
target/riscv: Don't save pc when exception return As pc will be written by the xepc in exception return, just ignore pc in translation. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220120122050.41546-3-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-20 15:20:29 +03:00
target_ulong helper_sret(CPURISCVState *env)
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
{
target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit mstatus/mstatush and vsstatus/vsstatush are two halved for RISCV32. This patch expands mstatus and vsstatus to uint64_t instead of target_ulong so that it can be saved as one unit and reduce some ifdefs in the code. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-2-jiangyifei@huawei.com
2020-10-26 14:55:25 +03:00
uint64_t mstatus;
target_ulong prev_priv, prev_virt;
target/riscv: Add Hypervisor trap return support Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-01 04:02:33 +03:00
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
if (!(env->priv >= PRV_S)) {
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
target_ulong retpc = env->sepc;
if (!riscv_has_ext(env, RVC) && (retpc & 0x3)) {
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_raise_exception(env, RISCV_EXCP_INST_ADDR_MIS, GETPC());
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
target/riscv: Drop support for ISA spec version 1.09.1 The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since 4.1. It's not commonly used so let's remove support for it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-05-05 23:04:50 +03:00
if (get_field(env->mstatus, MSTATUS_TSR) && !(env->priv >= PRV_M)) {
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
RISC-V: Implement mstatus.TSR/TW/TVM This adds the necessary minimum to support S-mode virtualization for priv ISA >= v1.10 Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Co-authored-by: Matthew Suozzo <msuozzo@google.com> Co-authored-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:08 +03:00
}
target/riscv: Remove riscv_cpu_virt_enabled() Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-05 11:58:10 +03:00
if (env->virt_enabled && get_field(env->hstatus, HSTATUS_VTSR)) {
target/riscv: Support the Virtual Instruction fault Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:49 +03:00
riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, GETPC());
}
target/riscv: Add Hypervisor trap return support Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-01 04:02:33 +03:00
mstatus = env->mstatus;
target/riscv: Simplify helper_sret() a little bit There are 2 paths in helper_sret() and the same mstatus update codes are replicated. Extract the common parts to simplify it a little bit. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-12-07 12:00:36 +03:00
prev_priv = get_field(mstatus, MSTATUS_SPP);
mstatus = set_field(mstatus, MSTATUS_SIE,
get_field(mstatus, MSTATUS_SPIE));
mstatus = set_field(mstatus, MSTATUS_SPIE, 1);
mstatus = set_field(mstatus, MSTATUS_SPP, PRV_U);
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+ Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when leaving M-mode. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-12-07 12:00:37 +03:00
if (env->priv_ver >= PRIV_VERSION_1_12_0) {
mstatus = set_field(mstatus, MSTATUS_MPRV, 0);
}
target/riscv: Simplify helper_sret() a little bit There are 2 paths in helper_sret() and the same mstatus update codes are replicated. Extract the common parts to simplify it a little bit. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-12-07 12:00:36 +03:00
env->mstatus = mstatus;
target/riscv: Add Hypervisor trap return support Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-01 04:02:33 +03:00
target/riscv: Remove riscv_cpu_virt_enabled() Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-05 11:58:10 +03:00
if (riscv_has_ext(env, RVH) && !env->virt_enabled) {
target/riscv: Add Hypervisor trap return support Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-01 04:02:33 +03:00
/* We support Hypervisor extensions and virtulisation is disabled */
target_ulong hstatus = env->hstatus;
prev_virt = get_field(hstatus, HSTATUS_SPV);
target/riscv: Update the Hypervisor trap return/entry Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: e7e4e801234f2934306e734f65860f601a5745bd.1597259519.git.alistair.francis@wdc.com Message-Id: <e7e4e801234f2934306e734f65860f601a5745bd.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:33 +03:00
hstatus = set_field(hstatus, HSTATUS_SPV, 0);
target/riscv: Add Hypervisor trap return support Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-01 04:02:33 +03:00
env->hstatus = hstatus;
if (prev_virt) {
riscv_cpu_swap_hypervisor_regs(env);
}
riscv_cpu_set_virt_enabled(env, prev_virt);
}
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_cpu_set_mode(env, prev_priv);
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
return retpc;
}
target/riscv: Don't save pc when exception return As pc will be written by the xepc in exception return, just ignore pc in translation. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220120122050.41546-3-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-20 15:20:29 +03:00
target_ulong helper_mret(CPURISCVState *env)
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
{
if (!(env->priv >= PRV_M)) {
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
target_ulong retpc = env->mepc;
if (!riscv_has_ext(env, RVC) && (retpc & 0x3)) {
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_raise_exception(env, RISCV_EXCP_INST_ADDR_MIS, GETPC());
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit mstatus/mstatush and vsstatus/vsstatush are two halved for RISCV32. This patch expands mstatus and vsstatus to uint64_t instead of target_ulong so that it can be saved as one unit and reduce some ifdefs in the code. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-2-jiangyifei@huawei.com
2020-10-26 14:55:25 +03:00
uint64_t mstatus = env->mstatus;
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
target_ulong prev_priv = get_field(mstatus, MSTATUS_MPP);
target/riscv/pmp: Raise exception if no PMP entry is configured As per the privilege specification, any access from S/U mode should fail if no pmp region is configured. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201223192553.332508-1-atish.patra@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-12-23 22:25:53 +03:00
target/riscv: remove RISCV_FEATURE_PMP RISCV_FEATURE_PMP is being set via riscv_set_feature() by mirroring the cpu->cfg.pmp flag. Use the flag instead. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20230222185205.355361-8-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-22 21:52:02 +03:00
if (riscv_cpu_cfg(env)->pmp &&
target/riscv/pmp: fix no pmp illegal intrs As per the privilege specification, any access from S/U mode should fail if no pmp region is configured and pmp is present, othwerwise access should succeed. Fixes: d102f19a208 (target/riscv/pmp: Raise exception if no PMP entry is configured) Signed-off-by: Nikita Shubin <n.shubin@yadro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211214092659.15709-1-nikita.shubin@maquefel.me Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-14 12:26:59 +03:00
!pmp_get_num_rules(env) && (prev_priv != PRV_M)) {
target/riscv: Fix mret exception cause when no pmp rule is configured The priv spec v1.12 says: If no PMP entry matches an M-mode access, the access succeeds. If no PMP entry matches an S-mode or U-mode access, but at least one PMP entry is implemented, the access fails. Failed accesses generate an instruction, load, or store access-fault exception. At present the exception cause is set to 'illegal instruction' but should have been 'instruction access fault'. Fixes: d102f19a2085 ("target/riscv/pmp: Raise exception if no PMP entry is configured") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221205065303.204095-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-12-05 09:53:03 +03:00
riscv_raise_exception(env, RISCV_EXCP_INST_ACCESS_FAULT, GETPC());
target/riscv/pmp: Raise exception if no PMP entry is configured As per the privilege specification, any access from S/U mode should fail if no pmp region is configured. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201223192553.332508-1-atish.patra@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-12-23 22:25:53 +03:00
}
target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit mstatus/mstatush and vsstatus/vsstatush are two halved for RISCV32. This patch expands mstatus and vsstatus to uint64_t instead of target_ulong so that it can be saved as one unit and reduce some ifdefs in the code. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-2-jiangyifei@huawei.com
2020-10-26 14:55:25 +03:00
target_ulong prev_virt = get_field(env->mstatus, MSTATUS_MPV);
target/riscv: Drop support for ISA spec version 1.09.1 The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since 4.1. It's not commonly used so let's remove support for it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-05-05 23:04:50 +03:00
mstatus = set_field(mstatus, MSTATUS_MIE,
get_field(mstatus, MSTATUS_MPIE));
riscv: Set xPIE to 1 after xRET When executing an xRET instruction, supposing xPP holds the value y, xIE is set to xPIE; the privilege mode is changed to y; xPIE is set to 1. But QEMU sets xPIE to 0 incorrectly. Signed-off-by: Yiting Wang <yiting.wang@windriver.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-03 06:53:42 +03:00
mstatus = set_field(mstatus, MSTATUS_MPIE, 1);
target/riscv: Fix the mstatus.MPP value after executing MRET The MPP will be set to the least-privileged supported mode (U if U-mode is implemented, else M). Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230407014743.18779-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-07 04:47:41 +03:00
mstatus = set_field(mstatus, MSTATUS_MPP,
riscv_has_ext(env, RVU) ? PRV_U : PRV_M);
target/riscv: Add Hypervisor trap return support Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-01 04:02:33 +03:00
mstatus = set_field(mstatus, MSTATUS_MPV, 0);
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+ Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when leaving M-mode. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221207090037.281452-2-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-12-07 12:00:37 +03:00
if ((env->priv_ver >= PRIV_VERSION_1_12_0) && (prev_priv != PRV_M)) {
mstatus = set_field(mstatus, MSTATUS_MPRV, 0);
}
RISC-V: Implement modular CSR helper interface Previous CSR code uses csr_read_helper and csr_write_helper to update CSR registers however this interface prevents atomic read/modify/write CSR operations; in addition there is no trap-free method to access to CSRs due to the monolithic CSR functions call longjmp. The current iCSR interface is not safe to be called by target/riscv/gdbstub.c as privilege checks or missing CSRs may call longjmp to generate exceptions. It needs to indicate existence so traps can be generated in the CSR instruction helpers. This commit moves CSR access from the monolithic switch statements in target/riscv/op_helper.c into modular read/write functions in target/riscv/csr.c using a new function pointer table for dispatch (which can later be used to allow CPUs to hook up model specific CSRs). A read/modify/write interface is added to support atomic CSR operations and a non-trapping interface is added to allow exception-free access to CSRs by the debugger. The CSR functions and CSR dispatch table are ordered to match The RISC-V Instruction Set Manual, Volume II: Privileged Architecture Version 1.10, 2.2 CSR Listing. An API is added to allow derived cpu instances to modify or implement new CSR operations. Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-05 02:23:55 +03:00
env->mstatus = mstatus;
target/riscv: Add Hypervisor trap return support Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-01 04:02:33 +03:00
riscv_cpu_set_mode(env, prev_priv);
if (riscv_has_ext(env, RVH)) {
if (prev_virt) {
riscv_cpu_swap_hypervisor_regs(env);
}
riscv_cpu_set_virt_enabled(env, prev_virt);
}
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
return retpc;
}
void helper_wfi(CPURISCVState *env)
{
target/riscv: Use env_cpu, env_archcpu Cleanup in the boilerplate that each target must define. Replace riscv_env_get_cpu with env_archcpu. The combination CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-23 05:11:37 +03:00
CPUState *cs = env_cpu(env);
target/riscv: fix wfi exception behavior The wfi exception trigger behavior should take into account user mode, hstatus.vtw, and the fact the an wfi might raise different types of exceptions depending on various factors: If supervisor mode is not present: - an illegal instruction exception should be generated if user mode executes and wfi instruction and mstatus.tw = 1. If supervisor mode is present: - when a wfi instruction is executed, an illegal exception should be triggered if either the current mode is user or the mode is supervisor and mstatus.tw is set. Plus, if the hypervisor extensions are enabled: - a virtual instruction exception should be raised when a wfi is executed from virtual-user or virtual-supervisor and hstatus.vtw is set. Signed-off-by: Jose Martins <josemartins90@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210420213656.85148-1-josemartins90@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-04-21 00:36:56 +03:00
bool rvs = riscv_has_ext(env, RVS);
bool prv_u = env->priv == PRV_U;
bool prv_s = env->priv == PRV_S;
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
target/riscv: fix wfi exception behavior The wfi exception trigger behavior should take into account user mode, hstatus.vtw, and the fact the an wfi might raise different types of exceptions depending on various factors: If supervisor mode is not present: - an illegal instruction exception should be generated if user mode executes and wfi instruction and mstatus.tw = 1. If supervisor mode is present: - when a wfi instruction is executed, an illegal exception should be triggered if either the current mode is user or the mode is supervisor and mstatus.tw is set. Plus, if the hypervisor extensions are enabled: - a virtual instruction exception should be raised when a wfi is executed from virtual-user or virtual-supervisor and hstatus.vtw is set. Signed-off-by: Jose Martins <josemartins90@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210420213656.85148-1-josemartins90@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-04-21 00:36:56 +03:00
if (((prv_s || (!rvs && prv_u)) && get_field(env->mstatus, MSTATUS_TW)) ||
target/riscv: Remove riscv_cpu_virt_enabled() Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-05 11:58:10 +03:00
(rvs && prv_u && !env->virt_enabled)) {
target/riscv: fix wfi exception behavior The wfi exception trigger behavior should take into account user mode, hstatus.vtw, and the fact the an wfi might raise different types of exceptions depending on various factors: If supervisor mode is not present: - an illegal instruction exception should be generated if user mode executes and wfi instruction and mstatus.tw = 1. If supervisor mode is present: - when a wfi instruction is executed, an illegal exception should be triggered if either the current mode is user or the mode is supervisor and mstatus.tw is set. Plus, if the hypervisor extensions are enabled: - a virtual instruction exception should be raised when a wfi is executed from virtual-user or virtual-supervisor and hstatus.vtw is set. Signed-off-by: Jose Martins <josemartins90@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210420213656.85148-1-josemartins90@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-04-21 00:36:56 +03:00
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
target/riscv: Fix format for indentation Fix identation problems, and try to use the same indentation strategy in the same file. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-3-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-05 11:58:11 +03:00
} else if (env->virt_enabled &&
(prv_u || (prv_s && get_field(env->hstatus, HSTATUS_VTW)))) {
target/riscv: Support the Virtual Instruction fault Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:49 +03:00
riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, GETPC());
RISC-V: Implement mstatus.TSR/TW/TVM This adds the necessary minimum to support S-mode virtualization for priv ISA >= v1.10 Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Co-authored-by: Matthew Suozzo <msuozzo@google.com> Co-authored-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:08 +03:00
} else {
cs->halted = 1;
cs->exception_index = EXCP_HLT;
cpu_loop_exit(cs);
}
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
void helper_tlb_flush(CPURISCVState *env)
{
target/riscv: Use env_cpu, env_archcpu Cleanup in the boilerplate that each target must define. Replace riscv_env_get_cpu with env_archcpu. The combination CPU(riscv_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-23 05:11:37 +03:00
CPUState *cs = env_cpu(env);
target/riscv: fix H extension TVM trap - Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled. - Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled. - Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with HSTATUS.VTVM enabled. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA. Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 13:15:59 +03:00
if (!env->virt_enabled &&
(env->priv == PRV_U ||
(env->priv == PRV_S && get_field(env->mstatus, MSTATUS_TVM)))) {
RISC-V: Use riscv prefix consistently on cpu helpers * Add riscv prefix to raise_exception function * Add riscv prefix to CSR read/write functions * Add riscv prefix to signal handler function * Add riscv prefix to get fflags function * Remove redundant declaration of riscv_cpu_init and rename cpu_riscv_init to riscv_cpu_init * rename riscv_set_mode to riscv_cpu_set_mode Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:23 +03:00
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
target/riscv: fix H extension TVM trap - Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled. - Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled. - Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with HSTATUS.VTVM enabled. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA. Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 13:15:59 +03:00
} else if (env->virt_enabled &&
(env->priv == PRV_U || get_field(env->hstatus, HSTATUS_VTVM))) {
target/riscv: Support the Virtual Instruction fault Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:49 +03:00
riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, GETPC());
RISC-V: Implement mstatus.TSR/TW/TVM This adds the necessary minimum to support S-mode virtualization for priv ISA >= v1.10 Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Co-authored-by: Matthew Suozzo <msuozzo@google.com> Co-authored-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-15 02:58:08 +03:00
} else {
tlb_flush(cs);
}
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
}
RISC-V: Adding XTheadSync ISA extension This patch adds support for the XTheadSync ISA extension. The patch uses the T-Head specific decoder and translation. The implementation introduces a helper to execute synchronization tasks: helper_tlb_flush_all() performs a synchronized TLB flush on all CPUs. Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Message-Id: <20230131202013.2541053-3-christoph.muellner@vrull.eu> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-31 23:20:01 +03:00
void helper_tlb_flush_all(CPURISCVState *env)
{
CPUState *cs = env_cpu(env);
tlb_flush_all_cpus_synced(cs);
}
target/riscv: Implement checks for hfence Call the helper_hyp_tlb_flush() function on hfence instructions which will generate an illegal insruction execption if we don't have permission to flush the Hypervisor level TLBs. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-04-04 01:54:59 +03:00
void helper_hyp_tlb_flush(CPURISCVState *env)
{
CPUState *cs = env_cpu(env);
target/riscv: fix H extension TVM trap - Trap satp/hgatp accesses from HS-mode when MSTATUS.TVM is enabled. - Trap satp accesses from VS-mode when HSTATUS.VTVM is enabled. - Raise RISCV_EXCP_ILLEGAL_INST when U-mode executes SFENCE.VMA/SINVAL.VMA. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes SFENCE.VMA/SINVAL.VMA or VS-mode executes SFENCE.VMA/SINVAL.VMA with HSTATUS.VTVM enabled. - Raise RISCV_EXCP_VIRT_INSTRUCTION_FAULT when VU-mode executes HFENCE.GVMA/HFENCE.VVMA/HINVAL.GVMA/HINVAL.VVMA. Signed-off-by: Yi Chen <chenyi2000@zju.edu.cn> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230406101559.39632-1-chenyi2000@zju.edu.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-06 13:15:59 +03:00
if (env->virt_enabled) {
target/riscv: Support the Virtual Instruction fault Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:49 +03:00
riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, GETPC());
}
target/riscv: Implement checks for hfence Call the helper_hyp_tlb_flush() function on hfence instructions which will generate an illegal insruction execption if we don't have permission to flush the Hypervisor level TLBs. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-04-04 01:54:59 +03:00
if (env->priv == PRV_M ||
target/riscv: Remove riscv_cpu_virt_enabled() Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-05 11:58:10 +03:00
(env->priv == PRV_S && !env->virt_enabled)) {
target/riscv: Implement checks for hfence Call the helper_hyp_tlb_flush() function on hfence instructions which will generate an illegal insruction execption if we don't have permission to flush the Hypervisor level TLBs. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-04-04 01:54:59 +03:00
tlb_flush(cs);
return;
}
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
}
target/riscv: Support the Virtual Instruction fault Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:49 +03:00
void helper_hyp_gvma_tlb_flush(CPURISCVState *env)
{
target/riscv: Remove riscv_cpu_virt_enabled() Directly use env->virt_enabled instead. Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230405085813.40643-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-05 11:58:10 +03:00
if (env->priv == PRV_S && !env->virt_enabled &&
target/riscv: Support the Virtual Instruction fault Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com Message-Id: <4c744dce9b0b057cbb5cc0f4d4ac75cda682a8af.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:49 +03:00
get_field(env->mstatus, MSTATUS_TVM)) {
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, GETPC());
}
helper_hyp_tlb_flush(env);
}
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
static int check_access_hlsv(CPURISCVState *env, bool x, uintptr_t ra)
{
if (env->priv == PRV_M) {
/* always allowed */
} else if (env->virt_enabled) {
riscv_raise_exception(env, RISCV_EXCP_VIRT_INSTRUCTION_FAULT, ra);
} else if (env->priv == PRV_U && !get_field(env->hstatus, HSTATUS_HU)) {
riscv_raise_exception(env, RISCV_EXCP_ILLEGAL_INST, ra);
}
target/riscv: Check SUM in the correct register Table 9.5 "Effect of MPRV..." specifies that MPV=1 uses VS-level vsstatus.SUM instead of HS-level sstatus.SUM. For HLV/HSV instructions, the HS-level register does not apply, but the VS-level register presumably does, though this is not mentioned explicitly in the manual. However, it matches the behavior for MPV. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-18-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-18-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:25 +03:00
int mode = get_field(env->hstatus, HSTATUS_SPVP);
if (!x && mode == PRV_S && get_field(env->vsstatus, MSTATUS_SUM)) {
mode = MMUIdx_S_SUM;
}
return mode | MMU_2STAGE_BIT;
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
}
target_ulong helper_hyp_hlv_bu(CPURISCVState *env, target_ulong addr)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_UB, mmu_idx);
return cpu_ldb_mmu(env, addr, oi, ra);
}
target_ulong helper_hyp_hlv_hu(CPURISCVState *env, target_ulong addr)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_TEUW, mmu_idx);
return cpu_ldw_mmu(env, addr, oi, ra);
}
target_ulong helper_hyp_hlv_wu(CPURISCVState *env, target_ulong addr)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_TEUL, mmu_idx);
return cpu_ldl_mmu(env, addr, oi, ra);
}
target_ulong helper_hyp_hlv_d(CPURISCVState *env, target_ulong addr)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_TEUQ, mmu_idx);
return cpu_ldq_mmu(env, addr, oi, ra);
}
void helper_hyp_hsv_b(CPURISCVState *env, target_ulong addr, target_ulong val)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_UB, mmu_idx);
cpu_stb_mmu(env, addr, val, oi, ra);
}
void helper_hyp_hsv_h(CPURISCVState *env, target_ulong addr, target_ulong val)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_TEUW, mmu_idx);
cpu_stw_mmu(env, addr, val, oi, ra);
}
void helper_hyp_hsv_w(CPURISCVState *env, target_ulong addr, target_ulong val)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_TEUL, mmu_idx);
cpu_stl_mmu(env, addr, val, oi, ra);
}
void helper_hyp_hsv_d(CPURISCVState *env, target_ulong addr, target_ulong val)
{
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, false, ra);
MemOpIdx oi = make_memop_idx(MO_TEUQ, mmu_idx);
cpu_stq_mmu(env, addr, val, oi, ra);
}
target/riscv: Use cpu_ld*_code_mmu for HLVX Use the new functions to properly check execute permission for the read rather than read permission. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-10-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-10-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:17 +03:00
/*
* TODO: These implementations are not quite correct. They perform the
* access using execute permission just fine, but the final PMP check
* is supposed to have read permission as well. Without replicating
* a fair fraction of cputlb.c, fixing this requires adding new mmu_idx
* which would imply that exact check in tlb_fill.
*/
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
target_ulong helper_hyp_hlvx_hu(CPURISCVState *env, target_ulong addr)
target/riscv: Allow generating hlv/hlvx/hsv instructions Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com Message-Id: <477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:19 +03:00
{
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, true, ra);
target/riscv: Use cpu_ld*_code_mmu for HLVX Use the new functions to properly check execute permission for the read rather than read permission. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-10-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-10-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:17 +03:00
MemOpIdx oi = make_memop_idx(MO_TEUW, mmu_idx);
target/riscv: Allow generating hlv/hlvx/hsv instructions Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com Message-Id: <477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:19 +03:00
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
return cpu_ldw_code_mmu(env, addr, oi, GETPC());
target/riscv: Split the Hypervisor execute load helpers Split the hypervisor execute load functions into two seperate functions. This avoids us having to pass the memop to the C helper functions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 5b1550f0faa3c435cc77f3c1ae811dea98ab9e36.1604464950.git.alistair.francis@wdc.com
2020-11-04 07:43:34 +03:00
}
target/riscv: Allow generating hlv/hlvx/hsv instructions Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com Message-Id: <477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:19 +03:00
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
target_ulong helper_hyp_hlvx_wu(CPURISCVState *env, target_ulong addr)
target/riscv: Split the Hypervisor execute load helpers Split the hypervisor execute load functions into two seperate functions. This avoids us having to pass the memop to the C helper functions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 5b1550f0faa3c435cc77f3c1ae811dea98ab9e36.1604464950.git.alistair.francis@wdc.com
2020-11-04 07:43:34 +03:00
{
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
uintptr_t ra = GETPC();
int mmu_idx = check_access_hlsv(env, true, ra);
target/riscv: Use cpu_ld*_code_mmu for HLVX Use the new functions to properly check execute permission for the read rather than read permission. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-10-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-10-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:17 +03:00
MemOpIdx oi = make_memop_idx(MO_TEUL, mmu_idx);
target/riscv: Split the Hypervisor execute load helpers Split the hypervisor execute load functions into two seperate functions. This avoids us having to pass the memop to the C helper functions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 5b1550f0faa3c435cc77f3c1ae811dea98ab9e36.1604464950.git.alistair.francis@wdc.com
2020-11-04 07:43:34 +03:00
target/riscv: Handle HLV, HSV via helpers Implement these instructions via helpers, in expectation of determining the mmu_idx to use at runtime. This allows the permission check to also be moved out of line, which allows HLSX to be removed from TB_FLAGS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230325105429.1142530-11-richard.henderson@linaro.org> Message-Id: <20230412114333.118895-11-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-04-12 14:43:18 +03:00
return cpu_ldl_code_mmu(env, addr, oi, ra);
target/riscv: Allow generating hlv/hlvx/hsv instructions Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com Message-Id: <477c864312280ea55a98dc84cb01d826751b6c14.1597259519.git.alistair.francis@wdc.com>
2020-08-12 22:13:19 +03:00
}
RISC-V CPU Helpers Privileged control and status register helpers and page fault handling. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-02 15:31:10 +03:00
#endif /* !CONFIG_USER_ONLY */
Reference in New Issue Copy Permalink