qemu/target/ppc/translate/vmx-impl.c.inc

1895 lines
76 KiB
PHP
Raw Normal View History

/*
* translate/vmx-impl.c
*
* Altivec/VMX translation
*/
/*** Altivec vector extension ***/
/* Altivec registers moves */
static inline TCGv_ptr gen_avr_ptr(int reg)
{
TCGv_ptr r = tcg_temp_new_ptr();
tcg_gen_addi_ptr(r, cpu_env, avr_full_offset(reg));
return r;
}
#define GEN_VR_LDX(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv EA; \
TCGv_i64 avr; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
gen_set_access_type(ctx, ACCESS_INT); \
avr = tcg_temp_new_i64(); \
EA = tcg_temp_new(); \
gen_addr_reg_index(ctx, EA); \
tcg_gen_andi_tl(EA, EA, ~0xf); \
/* \
* We only need to swap high and low halves. gen_qemu_ld64_i64 \
* does necessary 64-bit byteswap already. \
*/ \
if (ctx->le_mode) { \
gen_qemu_ld64_i64(ctx, avr, EA); \
set_avr64(rD(ctx->opcode), avr, false); \
tcg_gen_addi_tl(EA, EA, 8); \
gen_qemu_ld64_i64(ctx, avr, EA); \
set_avr64(rD(ctx->opcode), avr, true); \
} else { \
gen_qemu_ld64_i64(ctx, avr, EA); \
set_avr64(rD(ctx->opcode), avr, true); \
tcg_gen_addi_tl(EA, EA, 8); \
gen_qemu_ld64_i64(ctx, avr, EA); \
set_avr64(rD(ctx->opcode), avr, false); \
} \
tcg_temp_free(EA); \
tcg_temp_free_i64(avr); \
}
#define GEN_VR_STX(name, opc2, opc3) \
static void gen_st##name(DisasContext *ctx) \
{ \
TCGv EA; \
TCGv_i64 avr; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
gen_set_access_type(ctx, ACCESS_INT); \
avr = tcg_temp_new_i64(); \
EA = tcg_temp_new(); \
gen_addr_reg_index(ctx, EA); \
tcg_gen_andi_tl(EA, EA, ~0xf); \
/* \
* We only need to swap high and low halves. gen_qemu_st64_i64 \
* does necessary 64-bit byteswap already. \
*/ \
if (ctx->le_mode) { \
get_avr64(avr, rD(ctx->opcode), false); \
gen_qemu_st64_i64(ctx, avr, EA); \
tcg_gen_addi_tl(EA, EA, 8); \
get_avr64(avr, rD(ctx->opcode), true); \
gen_qemu_st64_i64(ctx, avr, EA); \
} else { \
get_avr64(avr, rD(ctx->opcode), true); \
gen_qemu_st64_i64(ctx, avr, EA); \
tcg_gen_addi_tl(EA, EA, 8); \
get_avr64(avr, rD(ctx->opcode), false); \
gen_qemu_st64_i64(ctx, avr, EA); \
} \
tcg_temp_free(EA); \
tcg_temp_free_i64(avr); \
}
#define GEN_VR_LVE(name, opc2, opc3, size) \
static void gen_lve##name(DisasContext *ctx) \
{ \
TCGv EA; \
TCGv_ptr rs; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
gen_set_access_type(ctx, ACCESS_INT); \
EA = tcg_temp_new(); \
gen_addr_reg_index(ctx, EA); \
if (size > 1) { \
tcg_gen_andi_tl(EA, EA, ~(size - 1)); \
} \
rs = gen_avr_ptr(rS(ctx->opcode)); \
gen_helper_lve##name(cpu_env, rs, EA); \
tcg_temp_free(EA); \
tcg_temp_free_ptr(rs); \
}
#define GEN_VR_STVE(name, opc2, opc3, size) \
static void gen_stve##name(DisasContext *ctx) \
{ \
TCGv EA; \
TCGv_ptr rs; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
gen_set_access_type(ctx, ACCESS_INT); \
EA = tcg_temp_new(); \
gen_addr_reg_index(ctx, EA); \
if (size > 1) { \
tcg_gen_andi_tl(EA, EA, ~(size - 1)); \
} \
rs = gen_avr_ptr(rS(ctx->opcode)); \
gen_helper_stve##name(cpu_env, rs, EA); \
tcg_temp_free(EA); \
tcg_temp_free_ptr(rs); \
}
GEN_VR_LDX(lvx, 0x07, 0x03);
/* As we don't emulate the cache, lvxl is stricly equivalent to lvx */
GEN_VR_LDX(lvxl, 0x07, 0x0B);
GEN_VR_LVE(bx, 0x07, 0x00, 1);
GEN_VR_LVE(hx, 0x07, 0x01, 2);
GEN_VR_LVE(wx, 0x07, 0x02, 4);
GEN_VR_STX(svx, 0x07, 0x07);
/* As we don't emulate the cache, stvxl is stricly equivalent to stvx */
GEN_VR_STX(svxl, 0x07, 0x0F);
GEN_VR_STVE(bx, 0x07, 0x04, 1);
GEN_VR_STVE(hx, 0x07, 0x05, 2);
GEN_VR_STVE(wx, 0x07, 0x06, 4);
static void gen_mfvscr(DisasContext *ctx)
{
TCGv_i32 t;
TCGv_i64 avr;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
avr = tcg_temp_new_i64();
tcg_gen_movi_i64(avr, 0);
set_avr64(rD(ctx->opcode), avr, true);
t = tcg_temp_new_i32();
gen_helper_mfvscr(t, cpu_env);
tcg_gen_extu_i32_i64(avr, t);
set_avr64(rD(ctx->opcode), avr, false);
tcg_temp_free_i32(t);
tcg_temp_free_i64(avr);
}
static void gen_mtvscr(DisasContext *ctx)
{
TCGv_i32 val;
int bofs;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
val = tcg_temp_new_i32();
bofs = avr_full_offset(rB(ctx->opcode));
#ifdef HOST_WORDS_BIGENDIAN
bofs += 3 * 4;
#endif
tcg_gen_ld_i32(val, cpu_env, bofs);
gen_helper_mtvscr(cpu_env, val);
tcg_temp_free_i32(val);
}
#define GEN_VX_VMUL10(name, add_cin, ret_carry) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_i64 t0; \
TCGv_i64 t1; \
TCGv_i64 t2; \
TCGv_i64 avr; \
TCGv_i64 ten, z; \
\
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
\
t0 = tcg_temp_new_i64(); \
t1 = tcg_temp_new_i64(); \
t2 = tcg_temp_new_i64(); \
avr = tcg_temp_new_i64(); \
ten = tcg_const_i64(10); \
z = tcg_const_i64(0); \
\
if (add_cin) { \
get_avr64(avr, rA(ctx->opcode), false); \
tcg_gen_mulu2_i64(t0, t1, avr, ten); \
get_avr64(avr, rB(ctx->opcode), false); \
tcg_gen_andi_i64(t2, avr, 0xF); \
tcg_gen_add2_i64(avr, t2, t0, t1, t2, z); \
set_avr64(rD(ctx->opcode), avr, false); \
} else { \
get_avr64(avr, rA(ctx->opcode), false); \
tcg_gen_mulu2_i64(avr, t2, avr, ten); \
set_avr64(rD(ctx->opcode), avr, false); \
} \
\
if (ret_carry) { \
get_avr64(avr, rA(ctx->opcode), true); \
tcg_gen_mulu2_i64(t0, t1, avr, ten); \
tcg_gen_add2_i64(t0, avr, t0, t1, t2, z); \
set_avr64(rD(ctx->opcode), avr, false); \
set_avr64(rD(ctx->opcode), z, true); \
} else { \
get_avr64(avr, rA(ctx->opcode), true); \
tcg_gen_mul_i64(t0, avr, ten); \
tcg_gen_add_i64(avr, t0, t2); \
set_avr64(rD(ctx->opcode), avr, true); \
} \
\
tcg_temp_free_i64(t0); \
tcg_temp_free_i64(t1); \
tcg_temp_free_i64(t2); \
tcg_temp_free_i64(avr); \
tcg_temp_free_i64(ten); \
tcg_temp_free_i64(z); \
} \
GEN_VX_VMUL10(vmul10uq, 0, 0);
GEN_VX_VMUL10(vmul10euq, 1, 0);
GEN_VX_VMUL10(vmul10cuq, 0, 1);
GEN_VX_VMUL10(vmul10ecuq, 1, 1);
#define GEN_VXFORM_V(name, vece, tcg_op, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
\
tcg_op(vece, \
avr_full_offset(rD(ctx->opcode)), \
avr_full_offset(rA(ctx->opcode)), \
avr_full_offset(rB(ctx->opcode)), \
16, 16); \
}
/* Logical operations */
GEN_VXFORM_V(vand, MO_64, tcg_gen_gvec_and, 2, 16);
GEN_VXFORM_V(vandc, MO_64, tcg_gen_gvec_andc, 2, 17);
GEN_VXFORM_V(vor, MO_64, tcg_gen_gvec_or, 2, 18);
GEN_VXFORM_V(vxor, MO_64, tcg_gen_gvec_xor, 2, 19);
GEN_VXFORM_V(vnor, MO_64, tcg_gen_gvec_nor, 2, 20);
GEN_VXFORM_V(veqv, MO_64, tcg_gen_gvec_eqv, 2, 26);
GEN_VXFORM_V(vnand, MO_64, tcg_gen_gvec_nand, 2, 22);
GEN_VXFORM_V(vorc, MO_64, tcg_gen_gvec_orc, 2, 21);
#define GEN_VXFORM(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr ra, rb, rd; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
ra = gen_avr_ptr(rA(ctx->opcode)); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(rd, ra, rb); \
tcg_temp_free_ptr(ra); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
target/ppc: Optimize emulation of lvsl and lvsr instructions Adding simple macro that is calling tcg implementation of appropriate instruction if altivec support is active. Optimization of altivec instruction lvsl (Load Vector for Shift Left). Place bytes sh:sh+15 of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F in destination register. Sh is calculated by adding 2 source registers and getting bits 60-63 of result. First, the bits [28-31] are placed from EA to variable sh. After that, the bytes are created in the following way: sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101 followed by addition of the result with 0x0001020304050607. Value obtained is placed in higher doubleword element of vD. (sh+8):(sh+15) by adding the result of previous multiplication with 0x08090a0b0c0d0e0f. Value obtained is placed in lower doubleword element of vD. Optimization of altivec instruction lvsr (Load Vector for Shift Right). Place bytes 16-sh:31-sh of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F in destination register. Sh is calculated by adding 2 source registers and getting bits 60-63 of result. First, the bits [28-31] are placed from EA to variable sh. After that, the bytes are created in the following way: sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101 followed by substraction of the result from 0x1011121314151617. Value obtained is placed in higher doubleword element of vD. (sh+8):(sh+15) by substracting the result of previous multiplication from 0x18191a1b1c1d1e1f. Value obtained is placed in lower doubleword element of vD. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-2-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:47 +03:00
#define GEN_VXFORM_TRANS(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
trans_##name(ctx); \
}
#define GEN_VXFORM_ENV(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr ra, rb, rd; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
ra = gen_avr_ptr(rA(ctx->opcode)); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(cpu_env, rd, ra, rb); \
tcg_temp_free_ptr(ra); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
#define GEN_VXFORM3(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr ra, rb, rc, rd; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
ra = gen_avr_ptr(rA(ctx->opcode)); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rc = gen_avr_ptr(rC(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(rd, ra, rb, rc); \
tcg_temp_free_ptr(ra); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rc); \
tcg_temp_free_ptr(rd); \
}
/*
* Support for Altivec instruction pairs that use bit 31 (Rc) as
* an opcode bit. In general, these pairs come from different
* versions of the ISA, so we must also support a pair of flags for
* each instruction.
*/
#define GEN_VXFORM_DUAL(name0, flg0, flg2_0, name1, flg1, flg2_1) \
static void glue(gen_, name0##_##name1)(DisasContext *ctx) \
{ \
if ((Rc(ctx->opcode) == 0) && \
((ctx->insns_flags & flg0) || (ctx->insns_flags2 & flg2_0))) { \
gen_##name0(ctx); \
} else if ((Rc(ctx->opcode) == 1) && \
((ctx->insns_flags & flg1) || (ctx->insns_flags2 & flg2_1))) { \
gen_##name1(ctx); \
} else { \
gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL); \
} \
}
/*
* We use this macro if one instruction is realized with direct
* translation, and second one with helper.
*/
#define GEN_VXFORM_TRANS_DUAL(name0, flg0, flg2_0, name1, flg1, flg2_1)\
static void glue(gen_, name0##_##name1)(DisasContext *ctx) \
{ \
if ((Rc(ctx->opcode) == 0) && \
((ctx->insns_flags & flg0) || (ctx->insns_flags2 & flg2_0))) { \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
trans_##name0(ctx); \
} else if ((Rc(ctx->opcode) == 1) && \
((ctx->insns_flags & flg1) || (ctx->insns_flags2 & flg2_1))) { \
gen_##name1(ctx); \
} else { \
gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL); \
} \
}
/* Adds support to provide invalid mask */
#define GEN_VXFORM_DUAL_EXT(name0, flg0, flg2_0, inval0, \
name1, flg1, flg2_1, inval1) \
static void glue(gen_, name0##_##name1)(DisasContext *ctx) \
{ \
if ((Rc(ctx->opcode) == 0) && \
((ctx->insns_flags & flg0) || (ctx->insns_flags2 & flg2_0)) && \
!(ctx->opcode & inval0)) { \
gen_##name0(ctx); \
} else if ((Rc(ctx->opcode) == 1) && \
((ctx->insns_flags & flg1) || (ctx->insns_flags2 & flg2_1)) && \
!(ctx->opcode & inval1)) { \
gen_##name1(ctx); \
} else { \
gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL); \
} \
}
#define GEN_VXFORM_HETRO(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr rb; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
rb = gen_avr_ptr(rB(ctx->opcode)); \
gen_helper_##name(cpu_gpr[rD(ctx->opcode)], cpu_gpr[rA(ctx->opcode)], rb); \
tcg_temp_free_ptr(rb); \
}
GEN_VXFORM_V(vaddubm, MO_8, tcg_gen_gvec_add, 0, 0);
GEN_VXFORM_DUAL_EXT(vaddubm, PPC_ALTIVEC, PPC_NONE, 0, \
vmul10cuq, PPC_NONE, PPC2_ISA300, 0x0000F800)
GEN_VXFORM_V(vadduhm, MO_16, tcg_gen_gvec_add, 0, 1);
GEN_VXFORM_DUAL(vadduhm, PPC_ALTIVEC, PPC_NONE, \
vmul10ecuq, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_V(vadduwm, MO_32, tcg_gen_gvec_add, 0, 2);
GEN_VXFORM_V(vaddudm, MO_64, tcg_gen_gvec_add, 0, 3);
GEN_VXFORM_V(vsububm, MO_8, tcg_gen_gvec_sub, 0, 16);
GEN_VXFORM_V(vsubuhm, MO_16, tcg_gen_gvec_sub, 0, 17);
GEN_VXFORM_V(vsubuwm, MO_32, tcg_gen_gvec_sub, 0, 18);
GEN_VXFORM_V(vsubudm, MO_64, tcg_gen_gvec_sub, 0, 19);
GEN_VXFORM_V(vmaxub, MO_8, tcg_gen_gvec_umax, 1, 0);
GEN_VXFORM_V(vmaxuh, MO_16, tcg_gen_gvec_umax, 1, 1);
GEN_VXFORM_V(vmaxuw, MO_32, tcg_gen_gvec_umax, 1, 2);
GEN_VXFORM_V(vmaxud, MO_64, tcg_gen_gvec_umax, 1, 3);
GEN_VXFORM_V(vmaxsb, MO_8, tcg_gen_gvec_smax, 1, 4);
GEN_VXFORM_V(vmaxsh, MO_16, tcg_gen_gvec_smax, 1, 5);
GEN_VXFORM_V(vmaxsw, MO_32, tcg_gen_gvec_smax, 1, 6);
GEN_VXFORM_V(vmaxsd, MO_64, tcg_gen_gvec_smax, 1, 7);
GEN_VXFORM_V(vminub, MO_8, tcg_gen_gvec_umin, 1, 8);
GEN_VXFORM_V(vminuh, MO_16, tcg_gen_gvec_umin, 1, 9);
GEN_VXFORM_V(vminuw, MO_32, tcg_gen_gvec_umin, 1, 10);
GEN_VXFORM_V(vminud, MO_64, tcg_gen_gvec_umin, 1, 11);
GEN_VXFORM_V(vminsb, MO_8, tcg_gen_gvec_smin, 1, 12);
GEN_VXFORM_V(vminsh, MO_16, tcg_gen_gvec_smin, 1, 13);
GEN_VXFORM_V(vminsw, MO_32, tcg_gen_gvec_smin, 1, 14);
GEN_VXFORM_V(vminsd, MO_64, tcg_gen_gvec_smin, 1, 15);
GEN_VXFORM(vavgub, 1, 16);
GEN_VXFORM(vabsdub, 1, 16);
GEN_VXFORM_DUAL(vavgub, PPC_ALTIVEC, PPC_NONE, \
vabsdub, PPC_NONE, PPC2_ISA300)
GEN_VXFORM(vavguh, 1, 17);
GEN_VXFORM(vabsduh, 1, 17);
GEN_VXFORM_DUAL(vavguh, PPC_ALTIVEC, PPC_NONE, \
vabsduh, PPC_NONE, PPC2_ISA300)
GEN_VXFORM(vavguw, 1, 18);
GEN_VXFORM(vabsduw, 1, 18);
GEN_VXFORM_DUAL(vavguw, PPC_ALTIVEC, PPC_NONE, \
vabsduw, PPC_NONE, PPC2_ISA300)
GEN_VXFORM(vavgsb, 1, 20);
GEN_VXFORM(vavgsh, 1, 21);
GEN_VXFORM(vavgsw, 1, 22);
GEN_VXFORM(vmrghb, 6, 0);
GEN_VXFORM(vmrghh, 6, 1);
GEN_VXFORM(vmrghw, 6, 2);
GEN_VXFORM(vmrglb, 6, 4);
GEN_VXFORM(vmrglh, 6, 5);
GEN_VXFORM(vmrglw, 6, 6);
static void trans_vmrgew(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
int VA = rA(ctx->opcode);
int VB = rB(ctx->opcode);
TCGv_i64 tmp = tcg_temp_new_i64();
TCGv_i64 avr = tcg_temp_new_i64();
get_avr64(avr, VB, true);
tcg_gen_shri_i64(tmp, avr, 32);
get_avr64(avr, VA, true);
tcg_gen_deposit_i64(avr, avr, tmp, 0, 32);
set_avr64(VT, avr, true);
get_avr64(avr, VB, false);
tcg_gen_shri_i64(tmp, avr, 32);
get_avr64(avr, VA, false);
tcg_gen_deposit_i64(avr, avr, tmp, 0, 32);
set_avr64(VT, avr, false);
tcg_temp_free_i64(tmp);
tcg_temp_free_i64(avr);
}
static void trans_vmrgow(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
int VA = rA(ctx->opcode);
int VB = rB(ctx->opcode);
TCGv_i64 t0 = tcg_temp_new_i64();
TCGv_i64 t1 = tcg_temp_new_i64();
TCGv_i64 avr = tcg_temp_new_i64();
get_avr64(t0, VB, true);
get_avr64(t1, VA, true);
tcg_gen_deposit_i64(avr, t0, t1, 32, 32);
set_avr64(VT, avr, true);
get_avr64(t0, VB, false);
get_avr64(t1, VA, false);
tcg_gen_deposit_i64(avr, t0, t1, 32, 32);
set_avr64(VT, avr, false);
tcg_temp_free_i64(t0);
tcg_temp_free_i64(t1);
tcg_temp_free_i64(avr);
}
target/ppc: Optimize emulation of lvsl and lvsr instructions Adding simple macro that is calling tcg implementation of appropriate instruction if altivec support is active. Optimization of altivec instruction lvsl (Load Vector for Shift Left). Place bytes sh:sh+15 of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F in destination register. Sh is calculated by adding 2 source registers and getting bits 60-63 of result. First, the bits [28-31] are placed from EA to variable sh. After that, the bytes are created in the following way: sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101 followed by addition of the result with 0x0001020304050607. Value obtained is placed in higher doubleword element of vD. (sh+8):(sh+15) by adding the result of previous multiplication with 0x08090a0b0c0d0e0f. Value obtained is placed in lower doubleword element of vD. Optimization of altivec instruction lvsr (Load Vector for Shift Right). Place bytes 16-sh:31-sh of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F in destination register. Sh is calculated by adding 2 source registers and getting bits 60-63 of result. First, the bits [28-31] are placed from EA to variable sh. After that, the bytes are created in the following way: sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101 followed by substraction of the result from 0x1011121314151617. Value obtained is placed in higher doubleword element of vD. (sh+8):(sh+15) by substracting the result of previous multiplication from 0x18191a1b1c1d1e1f. Value obtained is placed in lower doubleword element of vD. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-2-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:47 +03:00
/*
* lvsl VRT,RA,RB - Load Vector for Shift Left
*
* Let the EA be the sum (rA|0)+(rB). Let sh=EA[2831].
* Let X be the 32-byte value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F.
* Bytes sh:sh+15 of X are placed into vD.
*/
static void trans_lvsl(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
TCGv_i64 result = tcg_temp_new_i64();
TCGv_i64 sh = tcg_temp_new_i64();
TCGv EA = tcg_temp_new();
/* Get sh(from description) by anding EA with 0xf. */
gen_addr_reg_index(ctx, EA);
tcg_gen_extu_tl_i64(sh, EA);
tcg_gen_andi_i64(sh, sh, 0xfULL);
/*
* Create bytes sh:sh+7 of X(from description) and place them in
* higher doubleword of vD.
*/
tcg_gen_muli_i64(sh, sh, 0x0101010101010101ULL);
tcg_gen_addi_i64(result, sh, 0x0001020304050607ull);
set_avr64(VT, result, true);
/*
* Create bytes sh+8:sh+15 of X(from description) and place them in
* lower doubleword of vD.
*/
tcg_gen_addi_i64(result, sh, 0x08090a0b0c0d0e0fULL);
set_avr64(VT, result, false);
tcg_temp_free_i64(result);
tcg_temp_free_i64(sh);
tcg_temp_free(EA);
}
/*
* lvsr VRT,RA,RB - Load Vector for Shift Right
*
* Let the EA be the sum (rA|0)+(rB). Let sh=EA[2831].
* Let X be the 32-byte value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F.
* Bytes (16-sh):(31-sh) of X are placed into vD.
*/
static void trans_lvsr(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
TCGv_i64 result = tcg_temp_new_i64();
TCGv_i64 sh = tcg_temp_new_i64();
TCGv EA = tcg_temp_new();
/* Get sh(from description) by anding EA with 0xf. */
gen_addr_reg_index(ctx, EA);
tcg_gen_extu_tl_i64(sh, EA);
tcg_gen_andi_i64(sh, sh, 0xfULL);
/*
* Create bytes (16-sh):(23-sh) of X(from description) and place them in
* higher doubleword of vD.
*/
tcg_gen_muli_i64(sh, sh, 0x0101010101010101ULL);
tcg_gen_subfi_i64(result, 0x1011121314151617ULL, sh);
set_avr64(VT, result, true);
/*
* Create bytes (24-sh):(32-sh) of X(from description) and place them in
* lower doubleword of vD.
*/
tcg_gen_subfi_i64(result, 0x18191a1b1c1d1e1fULL, sh);
set_avr64(VT, result, false);
tcg_temp_free_i64(result);
tcg_temp_free_i64(sh);
tcg_temp_free(EA);
}
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
/*
* vsl VRT,VRA,VRB - Vector Shift Left
*
* Shifting left 128 bit value of vA by value specified in bits 125-127 of vB.
* Lowest 3 bits in each byte element of register vB must be identical or
* result is undefined.
*/
static void trans_vsl(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
int VA = rA(ctx->opcode);
int VB = rB(ctx->opcode);
TCGv_i64 avr = tcg_temp_new_i64();
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
TCGv_i64 sh = tcg_temp_new_i64();
TCGv_i64 carry = tcg_temp_new_i64();
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
TCGv_i64 tmp = tcg_temp_new_i64();
/* Place bits 125-127 of vB in 'sh'. */
get_avr64(avr, VB, false);
tcg_gen_andi_i64(sh, avr, 0x07ULL);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
/*
* Save highest 'sh' bits of lower doubleword element of vA in variable
* 'carry' and perform shift on lower doubleword.
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
*/
get_avr64(avr, VA, false);
tcg_gen_subfi_i64(tmp, 32, sh);
tcg_gen_shri_i64(carry, avr, 32);
tcg_gen_shr_i64(carry, carry, tmp);
tcg_gen_shl_i64(avr, avr, sh);
set_avr64(VT, avr, false);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
/*
* Perform shift on higher doubleword element of vA and replace lowest
* 'sh' bits with 'carry'.
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
*/
get_avr64(avr, VA, true);
tcg_gen_shl_i64(avr, avr, sh);
tcg_gen_or_i64(avr, avr, carry);
set_avr64(VT, avr, true);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
tcg_temp_free_i64(avr);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
tcg_temp_free_i64(sh);
tcg_temp_free_i64(carry);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
tcg_temp_free_i64(tmp);
}
/*
* vsr VRT,VRA,VRB - Vector Shift Right
*
* Shifting right 128 bit value of vA by value specified in bits 125-127 of vB.
* Lowest 3 bits in each byte element of register vB must be identical or
* result is undefined.
*/
static void trans_vsr(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
int VA = rA(ctx->opcode);
int VB = rB(ctx->opcode);
TCGv_i64 avr = tcg_temp_new_i64();
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
TCGv_i64 sh = tcg_temp_new_i64();
TCGv_i64 carry = tcg_temp_new_i64();
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
TCGv_i64 tmp = tcg_temp_new_i64();
/* Place bits 125-127 of vB in 'sh'. */
get_avr64(avr, VB, false);
tcg_gen_andi_i64(sh, avr, 0x07ULL);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
/*
* Save lowest 'sh' bits of higher doubleword element of vA in variable
* 'carry' and perform shift on higher doubleword.
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
*/
get_avr64(avr, VA, true);
tcg_gen_subfi_i64(tmp, 32, sh);
tcg_gen_shli_i64(carry, avr, 32);
tcg_gen_shl_i64(carry, carry, tmp);
tcg_gen_shr_i64(avr, avr, sh);
set_avr64(VT, avr, true);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
/*
* Perform shift on lower doubleword element of vA and replace highest
* 'sh' bits with 'carry'.
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
*/
get_avr64(avr, VA, false);
tcg_gen_shr_i64(avr, avr, sh);
tcg_gen_or_i64(avr, avr, carry);
set_avr64(VT, avr, false);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
tcg_temp_free_i64(avr);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
tcg_temp_free_i64(sh);
tcg_temp_free_i64(carry);
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
tcg_temp_free_i64(tmp);
}
target/ppc: Optimize emulation of vgbbd instruction Optimize altivec instruction vgbbd (Vector Gather Bits by Bytes by Doubleword) All ith bits (i in range 1 to 8) of each byte of doubleword element in source register are concatenated and placed into ith byte of appropriate doubleword element in destination register. Following solution is done for both doubleword elements of source register in parallel, in order to reduce the number of instructions needed(that's why arrays are used): First, both doubleword elements of source register vB are placed in appropriate element of array avr. Bits are gathered in 2x8 iterations(2 for loops). In first iteration bit 1 of byte 1, bit 2 of byte 2,... bit 8 of byte 8 are in their final spots so avr[i], i={0,1} can be and-ed with tcg_mask. For every following iteration, both avr[i] and tcg_mask variables have to be shifted right for 7 and 8 places, respectively, in order to get bit 1 of byte 2, bit 2 of byte 3.. bit 7 of byte 8 in their final spots so shifted avr values(saved in tmp) can be and-ed with new value of tcg_mask... After first 8 iteration(first loop), all the first bits are in their final places, all second bits but second bit from eight byte are in their places... only 1 eight bit from eight byte is in it's place). In second loop we do all operations symmetrically, in order to get other half of bits in their final spots. Results for first and second doubleword elements are saved in result[0] and result[1] respectively. In the end those results are saved in appropriate doubleword element of destination register vD. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-5-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:50 +03:00
/*
* vgbbd VRT,VRB - Vector Gather Bits by Bytes by Doubleword
*
* All ith bits (i in range 1 to 8) of each byte of doubleword element in source
* register are concatenated and placed into ith byte of appropriate doubleword
* element in destination register.
*
* Following solution is done for both doubleword elements of source register
* in parallel, in order to reduce the number of instructions needed(that's why
* arrays are used):
* First, both doubleword elements of source register vB are placed in
* appropriate element of array avr. Bits are gathered in 2x8 iterations(2 for
* loops). In first iteration bit 1 of byte 1, bit 2 of byte 2,... bit 8 of
* byte 8 are in their final spots so avr[i], i={0,1} can be and-ed with
* tcg_mask. For every following iteration, both avr[i] and tcg_mask variables
* have to be shifted right for 7 and 8 places, respectively, in order to get
* bit 1 of byte 2, bit 2 of byte 3.. bit 7 of byte 8 in their final spots so
* shifted avr values(saved in tmp) can be and-ed with new value of tcg_mask...
* After first 8 iteration(first loop), all the first bits are in their final
* places, all second bits but second bit from eight byte are in their places...
* only 1 eight bit from eight byte is in it's place). In second loop we do all
* operations symmetrically, in order to get other half of bits in their final
* spots. Results for first and second doubleword elements are saved in
* result[0] and result[1] respectively. In the end those results are saved in
* appropriate doubleword element of destination register vD.
*/
static void trans_vgbbd(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
int VB = rB(ctx->opcode);
TCGv_i64 tmp = tcg_temp_new_i64();
uint64_t mask = 0x8040201008040201ULL;
int i, j;
TCGv_i64 result[2];
result[0] = tcg_temp_new_i64();
result[1] = tcg_temp_new_i64();
TCGv_i64 avr[2];
avr[0] = tcg_temp_new_i64();
avr[1] = tcg_temp_new_i64();
TCGv_i64 tcg_mask = tcg_temp_new_i64();
tcg_gen_movi_i64(tcg_mask, mask);
for (j = 0; j < 2; j++) {
get_avr64(avr[j], VB, j);
tcg_gen_and_i64(result[j], avr[j], tcg_mask);
}
for (i = 1; i < 8; i++) {
tcg_gen_movi_i64(tcg_mask, mask >> (i * 8));
for (j = 0; j < 2; j++) {
tcg_gen_shri_i64(tmp, avr[j], i * 7);
tcg_gen_and_i64(tmp, tmp, tcg_mask);
tcg_gen_or_i64(result[j], result[j], tmp);
}
}
for (i = 1; i < 8; i++) {
tcg_gen_movi_i64(tcg_mask, mask << (i * 8));
for (j = 0; j < 2; j++) {
tcg_gen_shli_i64(tmp, avr[j], i * 7);
tcg_gen_and_i64(tmp, tmp, tcg_mask);
tcg_gen_or_i64(result[j], result[j], tmp);
}
}
for (j = 0; j < 2; j++) {
set_avr64(VT, result[j], j);
}
tcg_temp_free_i64(tmp);
tcg_temp_free_i64(tcg_mask);
tcg_temp_free_i64(result[0]);
tcg_temp_free_i64(result[1]);
tcg_temp_free_i64(avr[0]);
tcg_temp_free_i64(avr[1]);
}
/*
* vclzw VRT,VRB - Vector Count Leading Zeros Word
*
* Counting the number of leading zero bits of each word element in source
* register and placing result in appropriate word element of destination
* register.
*/
static void trans_vclzw(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
int VB = rB(ctx->opcode);
TCGv_i32 tmp = tcg_temp_new_i32();
int i;
/* Perform count for every word element using tcg_gen_clzi_i32. */
for (i = 0; i < 4; i++) {
tcg_gen_ld_i32(tmp, cpu_env,
offsetof(CPUPPCState, vsr[32 + VB].u64[0]) + i * 4);
tcg_gen_clzi_i32(tmp, tmp, 32);
tcg_gen_st_i32(tmp, cpu_env,
offsetof(CPUPPCState, vsr[32 + VT].u64[0]) + i * 4);
}
tcg_temp_free_i32(tmp);
}
/*
* vclzd VRT,VRB - Vector Count Leading Zeros Doubleword
*
* Counting the number of leading zero bits of each doubleword element in source
* register and placing result in appropriate doubleword element of destination
* register.
*/
static void trans_vclzd(DisasContext *ctx)
{
int VT = rD(ctx->opcode);
int VB = rB(ctx->opcode);
TCGv_i64 avr = tcg_temp_new_i64();
/* high doubleword */
get_avr64(avr, VB, true);
tcg_gen_clzi_i64(avr, avr, 64);
set_avr64(VT, avr, true);
/* low doubleword */
get_avr64(avr, VB, false);
tcg_gen_clzi_i64(avr, avr, 64);
set_avr64(VT, avr, false);
tcg_temp_free_i64(avr);
}
GEN_VXFORM(vmuloub, 4, 0);
GEN_VXFORM(vmulouh, 4, 1);
GEN_VXFORM(vmulouw, 4, 2);
GEN_VXFORM_V(vmuluwm, MO_32, tcg_gen_gvec_mul, 4, 2);
GEN_VXFORM_DUAL(vmulouw, PPC_ALTIVEC, PPC_NONE,
vmuluwm, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM(vmulosb, 4, 4);
GEN_VXFORM(vmulosh, 4, 5);
GEN_VXFORM(vmulosw, 4, 6);
GEN_VXFORM_V(vmulld, MO_64, tcg_gen_gvec_mul, 4, 7);
GEN_VXFORM(vmuleub, 4, 8);
GEN_VXFORM(vmuleuh, 4, 9);
GEN_VXFORM(vmuleuw, 4, 10);
GEN_VXFORM(vmulhuw, 4, 10);
GEN_VXFORM(vmulhud, 4, 11);
GEN_VXFORM_DUAL(vmuleuw, PPC_ALTIVEC, PPC_NONE,
vmulhuw, PPC_NONE, PPC2_ISA310);
GEN_VXFORM(vmulesb, 4, 12);
GEN_VXFORM(vmulesh, 4, 13);
GEN_VXFORM(vmulesw, 4, 14);
GEN_VXFORM(vmulhsw, 4, 14);
GEN_VXFORM_DUAL(vmulesw, PPC_ALTIVEC, PPC_NONE,
vmulhsw, PPC_NONE, PPC2_ISA310);
GEN_VXFORM(vmulhsd, 4, 15);
GEN_VXFORM_V(vslb, MO_8, tcg_gen_gvec_shlv, 2, 4);
GEN_VXFORM_V(vslh, MO_16, tcg_gen_gvec_shlv, 2, 5);
GEN_VXFORM_V(vslw, MO_32, tcg_gen_gvec_shlv, 2, 6);
GEN_VXFORM(vrlwnm, 2, 6);
GEN_VXFORM_DUAL(vslw, PPC_ALTIVEC, PPC_NONE, \
vrlwnm, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_V(vsld, MO_64, tcg_gen_gvec_shlv, 2, 23);
GEN_VXFORM_V(vsrb, MO_8, tcg_gen_gvec_shrv, 2, 8);
GEN_VXFORM_V(vsrh, MO_16, tcg_gen_gvec_shrv, 2, 9);
GEN_VXFORM_V(vsrw, MO_32, tcg_gen_gvec_shrv, 2, 10);
GEN_VXFORM_V(vsrd, MO_64, tcg_gen_gvec_shrv, 2, 27);
GEN_VXFORM_V(vsrab, MO_8, tcg_gen_gvec_sarv, 2, 12);
GEN_VXFORM_V(vsrah, MO_16, tcg_gen_gvec_sarv, 2, 13);
GEN_VXFORM_V(vsraw, MO_32, tcg_gen_gvec_sarv, 2, 14);
GEN_VXFORM_V(vsrad, MO_64, tcg_gen_gvec_sarv, 2, 15);
GEN_VXFORM(vsrv, 2, 28);
GEN_VXFORM(vslv, 2, 29);
GEN_VXFORM(vslo, 6, 16);
GEN_VXFORM(vsro, 6, 17);
GEN_VXFORM(vaddcuw, 0, 6);
GEN_VXFORM(vsubcuw, 0, 22);
#define GEN_VXFORM_SAT(NAME, VECE, NORM, SAT, OPC2, OPC3) \
static void glue(glue(gen_, NAME), _vec)(unsigned vece, TCGv_vec t, \
TCGv_vec sat, TCGv_vec a, \
TCGv_vec b) \
{ \
TCGv_vec x = tcg_temp_new_vec_matching(t); \
glue(glue(tcg_gen_, NORM), _vec)(VECE, x, a, b); \
glue(glue(tcg_gen_, SAT), _vec)(VECE, t, a, b); \
tcg_gen_cmp_vec(TCG_COND_NE, VECE, x, x, t); \
tcg_gen_or_vec(VECE, sat, sat, x); \
tcg_temp_free_vec(x); \
} \
static void glue(gen_, NAME)(DisasContext *ctx) \
{ \
static const TCGOpcode vecop_list[] = { \
glue(glue(INDEX_op_, NORM), _vec), \
glue(glue(INDEX_op_, SAT), _vec), \
INDEX_op_cmp_vec, 0 \
}; \
static const GVecGen4 g = { \
.fniv = glue(glue(gen_, NAME), _vec), \
.fno = glue(gen_helper_, NAME), \
.opt_opc = vecop_list, \
.write_aofs = true, \
.vece = VECE, \
}; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
tcg_gen_gvec_4(avr_full_offset(rD(ctx->opcode)), \
offsetof(CPUPPCState, vscr_sat), \
avr_full_offset(rA(ctx->opcode)), \
avr_full_offset(rB(ctx->opcode)), \
16, 16, &g); \
}
GEN_VXFORM_SAT(vaddubs, MO_8, add, usadd, 0, 8);
GEN_VXFORM_DUAL_EXT(vaddubs, PPC_ALTIVEC, PPC_NONE, 0, \
vmul10uq, PPC_NONE, PPC2_ISA300, 0x0000F800)
GEN_VXFORM_SAT(vadduhs, MO_16, add, usadd, 0, 9);
GEN_VXFORM_DUAL(vadduhs, PPC_ALTIVEC, PPC_NONE, \
vmul10euq, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_SAT(vadduws, MO_32, add, usadd, 0, 10);
GEN_VXFORM_SAT(vaddsbs, MO_8, add, ssadd, 0, 12);
GEN_VXFORM_SAT(vaddshs, MO_16, add, ssadd, 0, 13);
GEN_VXFORM_SAT(vaddsws, MO_32, add, ssadd, 0, 14);
GEN_VXFORM_SAT(vsububs, MO_8, sub, ussub, 0, 24);
GEN_VXFORM_SAT(vsubuhs, MO_16, sub, ussub, 0, 25);
GEN_VXFORM_SAT(vsubuws, MO_32, sub, ussub, 0, 26);
GEN_VXFORM_SAT(vsubsbs, MO_8, sub, sssub, 0, 28);
GEN_VXFORM_SAT(vsubshs, MO_16, sub, sssub, 0, 29);
GEN_VXFORM_SAT(vsubsws, MO_32, sub, sssub, 0, 30);
GEN_VXFORM(vadduqm, 0, 4);
GEN_VXFORM(vaddcuq, 0, 5);
GEN_VXFORM3(vaddeuqm, 30, 0);
GEN_VXFORM3(vaddecuq, 30, 0);
GEN_VXFORM_DUAL(vaddeuqm, PPC_NONE, PPC2_ALTIVEC_207, \
vaddecuq, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM(vsubuqm, 0, 20);
GEN_VXFORM(vsubcuq, 0, 21);
GEN_VXFORM3(vsubeuqm, 31, 0);
GEN_VXFORM3(vsubecuq, 31, 0);
GEN_VXFORM_DUAL(vsubeuqm, PPC_NONE, PPC2_ALTIVEC_207, \
vsubecuq, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_V(vrlb, MO_8, tcg_gen_gvec_rotlv, 2, 0);
GEN_VXFORM_V(vrlh, MO_16, tcg_gen_gvec_rotlv, 2, 1);
GEN_VXFORM_V(vrlw, MO_32, tcg_gen_gvec_rotlv, 2, 2);
GEN_VXFORM(vrlwmi, 2, 2);
GEN_VXFORM_DUAL(vrlw, PPC_ALTIVEC, PPC_NONE, \
vrlwmi, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_V(vrld, MO_64, tcg_gen_gvec_rotlv, 2, 3);
GEN_VXFORM(vrldmi, 2, 3);
GEN_VXFORM_DUAL(vrld, PPC_NONE, PPC2_ALTIVEC_207, \
vrldmi, PPC_NONE, PPC2_ISA300)
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
GEN_VXFORM_TRANS(vsl, 2, 7);
GEN_VXFORM(vrldnm, 2, 7);
GEN_VXFORM_DUAL(vsl, PPC_ALTIVEC, PPC_NONE, \
vrldnm, PPC_NONE, PPC2_ISA300)
target/ppc: Optimize emulation of vsl and vsr instructions Optimization of altivec instructions vsl and vsr(Vector Shift Left/Rigt). Perform shift operation (left and right respectively) on 128 bit value of register vA by value specified in bits 125-127 of register vB. Lowest 3 bits in each byte element of register vB must be identical or result is undefined. For vsl instruction, the first step is bits 125-127 of register vB have to be saved in variable sh. Then, the highest sh bits of the lower doubleword element of register vA are saved in variable shifted, in order not to lose those bits when shift operation is performed on the lower doubleword element of register vA, which is the next step. After shifting the lower doubleword element shift operation is performed on higher doubleword element of vA, with replacement of the lowest sh bits(that are now 0) with bits saved in shifted. For vsr instruction, firstly, the bits 125-127 of register vB have to be saved in variable sh. Then, the lowest sh bits of the higher doubleword element of register vA are saved in variable shifted, in odred not to lose those bits when the shift operation is performed on the higher doubleword element of register vA, which is the next step. After shifting higher doubleword element, shift operation is performed on lower doubleword element of vA, with replacement of highest sh bits(that are now 0) with bits saved in shifted. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-3-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:48 +03:00
GEN_VXFORM_TRANS(vsr, 2, 11);
GEN_VXFORM_ENV(vpkuhum, 7, 0);
GEN_VXFORM_ENV(vpkuwum, 7, 1);
GEN_VXFORM_ENV(vpkudum, 7, 17);
GEN_VXFORM_ENV(vpkuhus, 7, 2);
GEN_VXFORM_ENV(vpkuwus, 7, 3);
GEN_VXFORM_ENV(vpkudus, 7, 19);
GEN_VXFORM_ENV(vpkshus, 7, 4);
GEN_VXFORM_ENV(vpkswus, 7, 5);
GEN_VXFORM_ENV(vpksdus, 7, 21);
GEN_VXFORM_ENV(vpkshss, 7, 6);
GEN_VXFORM_ENV(vpkswss, 7, 7);
GEN_VXFORM_ENV(vpksdss, 7, 23);
GEN_VXFORM(vpkpx, 7, 12);
GEN_VXFORM_ENV(vsum4ubs, 4, 24);
GEN_VXFORM_ENV(vsum4sbs, 4, 28);
GEN_VXFORM_ENV(vsum4shs, 4, 25);
GEN_VXFORM_ENV(vsum2sws, 4, 26);
GEN_VXFORM_ENV(vsumsws, 4, 30);
GEN_VXFORM_ENV(vaddfp, 5, 0);
GEN_VXFORM_ENV(vsubfp, 5, 1);
GEN_VXFORM_ENV(vmaxfp, 5, 16);
GEN_VXFORM_ENV(vminfp, 5, 17);
GEN_VXFORM_HETRO(vextublx, 6, 24)
GEN_VXFORM_HETRO(vextuhlx, 6, 25)
GEN_VXFORM_HETRO(vextuwlx, 6, 26)
GEN_VXFORM_TRANS_DUAL(vmrgow, PPC_NONE, PPC2_ALTIVEC_207,
vextuwlx, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_HETRO(vextubrx, 6, 28)
GEN_VXFORM_HETRO(vextuhrx, 6, 29)
GEN_VXFORM_HETRO(vextuwrx, 6, 30)
target/ppc: Optimize emulation of lvsl and lvsr instructions Adding simple macro that is calling tcg implementation of appropriate instruction if altivec support is active. Optimization of altivec instruction lvsl (Load Vector for Shift Left). Place bytes sh:sh+15 of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F in destination register. Sh is calculated by adding 2 source registers and getting bits 60-63 of result. First, the bits [28-31] are placed from EA to variable sh. After that, the bytes are created in the following way: sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101 followed by addition of the result with 0x0001020304050607. Value obtained is placed in higher doubleword element of vD. (sh+8):(sh+15) by adding the result of previous multiplication with 0x08090a0b0c0d0e0f. Value obtained is placed in lower doubleword element of vD. Optimization of altivec instruction lvsr (Load Vector for Shift Right). Place bytes 16-sh:31-sh of value 0x00 || 0x01 || 0x02 || ... || 0x1E || 0x1F in destination register. Sh is calculated by adding 2 source registers and getting bits 60-63 of result. First, the bits [28-31] are placed from EA to variable sh. After that, the bytes are created in the following way: sh:(sh+7) of X(from description) by multiplying sh with 0x0101010101010101 followed by substraction of the result from 0x1011121314151617. Value obtained is placed in higher doubleword element of vD. (sh+8):(sh+15) by substracting the result of previous multiplication from 0x18191a1b1c1d1e1f. Value obtained is placed in lower doubleword element of vD. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-2-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:47 +03:00
GEN_VXFORM_TRANS(lvsl, 6, 31)
GEN_VXFORM_TRANS(lvsr, 6, 32)
GEN_VXFORM_TRANS_DUAL(vmrgew, PPC_NONE, PPC2_ALTIVEC_207,
vextuwrx, PPC_NONE, PPC2_ISA300)
#define GEN_VXRFORM1(opname, name, str, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr ra, rb, rd; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
ra = gen_avr_ptr(rA(ctx->opcode)); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##opname(cpu_env, rd, ra, rb); \
tcg_temp_free_ptr(ra); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
#define GEN_VXRFORM(name, opc2, opc3) \
GEN_VXRFORM1(name, name, #name, opc2, opc3) \
GEN_VXRFORM1(name##_dot, name##_, #name ".", opc2, (opc3 | (0x1 << 4)))
/*
* Support for Altivec instructions that use bit 31 (Rc) as an opcode
* bit but also use bit 21 as an actual Rc bit. In general, thse pairs
* come from different versions of the ISA, so we must also support a
* pair of flags for each instruction.
*/
#define GEN_VXRFORM_DUAL(name0, flg0, flg2_0, name1, flg1, flg2_1) \
static void glue(gen_, name0##_##name1)(DisasContext *ctx) \
{ \
if ((Rc(ctx->opcode) == 0) && \
((ctx->insns_flags & flg0) || (ctx->insns_flags2 & flg2_0))) { \
if (Rc21(ctx->opcode) == 0) { \
gen_##name0(ctx); \
} else { \
gen_##name0##_(ctx); \
} \
} else if ((Rc(ctx->opcode) == 1) && \
((ctx->insns_flags & flg1) || (ctx->insns_flags2 & flg2_1))) { \
if (Rc21(ctx->opcode) == 0) { \
gen_##name1(ctx); \
} else { \
gen_##name1##_(ctx); \
} \
} else { \
gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL); \
} \
}
GEN_VXRFORM(vcmpequb, 3, 0)
GEN_VXRFORM(vcmpequh, 3, 1)
GEN_VXRFORM(vcmpequw, 3, 2)
GEN_VXRFORM(vcmpequd, 3, 3)
GEN_VXRFORM(vcmpnezb, 3, 4)
GEN_VXRFORM(vcmpnezh, 3, 5)
GEN_VXRFORM(vcmpnezw, 3, 6)
GEN_VXRFORM(vcmpgtsb, 3, 12)
GEN_VXRFORM(vcmpgtsh, 3, 13)
GEN_VXRFORM(vcmpgtsw, 3, 14)
GEN_VXRFORM(vcmpgtsd, 3, 15)
GEN_VXRFORM(vcmpgtub, 3, 8)
GEN_VXRFORM(vcmpgtuh, 3, 9)
GEN_VXRFORM(vcmpgtuw, 3, 10)
GEN_VXRFORM(vcmpgtud, 3, 11)
GEN_VXRFORM(vcmpeqfp, 3, 3)
GEN_VXRFORM(vcmpgefp, 3, 7)
GEN_VXRFORM(vcmpgtfp, 3, 11)
GEN_VXRFORM(vcmpbfp, 3, 15)
GEN_VXRFORM(vcmpneb, 3, 0)
GEN_VXRFORM(vcmpneh, 3, 1)
GEN_VXRFORM(vcmpnew, 3, 2)
GEN_VXRFORM_DUAL(vcmpequb, PPC_ALTIVEC, PPC_NONE, \
vcmpneb, PPC_NONE, PPC2_ISA300)
GEN_VXRFORM_DUAL(vcmpequh, PPC_ALTIVEC, PPC_NONE, \
vcmpneh, PPC_NONE, PPC2_ISA300)
GEN_VXRFORM_DUAL(vcmpequw, PPC_ALTIVEC, PPC_NONE, \
vcmpnew, PPC_NONE, PPC2_ISA300)
GEN_VXRFORM_DUAL(vcmpeqfp, PPC_ALTIVEC, PPC_NONE, \
vcmpequd, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXRFORM_DUAL(vcmpbfp, PPC_ALTIVEC, PPC_NONE, \
vcmpgtsd, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXRFORM_DUAL(vcmpgtfp, PPC_ALTIVEC, PPC_NONE, \
vcmpgtud, PPC_NONE, PPC2_ALTIVEC_207)
static void gen_vsplti(DisasContext *ctx, int vece)
{
int simm;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
simm = SIMM5(ctx->opcode);
tcg_gen_gvec_dup_imm(vece, avr_full_offset(rD(ctx->opcode)), 16, 16, simm);
}
#define GEN_VXFORM_VSPLTI(name, vece, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) { gen_vsplti(ctx, vece); }
GEN_VXFORM_VSPLTI(vspltisb, MO_8, 6, 12);
GEN_VXFORM_VSPLTI(vspltish, MO_16, 6, 13);
GEN_VXFORM_VSPLTI(vspltisw, MO_32, 6, 14);
#define GEN_VXFORM_NOA(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr rb, rd; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(rd, rb); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
#define GEN_VXFORM_NOA_ENV(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr rb, rd; \
\
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(cpu_env, rd, rb); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
#define GEN_VXFORM_NOA_2(name, opc2, opc3, opc4) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr rb, rd; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(rd, rb); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
#define GEN_VXFORM_NOA_3(name, opc2, opc3, opc4) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr rb; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
rb = gen_avr_ptr(rB(ctx->opcode)); \
gen_helper_##name(cpu_gpr[rD(ctx->opcode)], rb); \
tcg_temp_free_ptr(rb); \
}
GEN_VXFORM_NOA(vupkhsb, 7, 8);
GEN_VXFORM_NOA(vupkhsh, 7, 9);
GEN_VXFORM_NOA(vupkhsw, 7, 25);
GEN_VXFORM_NOA(vupklsb, 7, 10);
GEN_VXFORM_NOA(vupklsh, 7, 11);
GEN_VXFORM_NOA(vupklsw, 7, 27);
GEN_VXFORM_NOA(vupkhpx, 7, 13);
GEN_VXFORM_NOA(vupklpx, 7, 15);
GEN_VXFORM_NOA_ENV(vrefp, 5, 4);
GEN_VXFORM_NOA_ENV(vrsqrtefp, 5, 5);
GEN_VXFORM_NOA_ENV(vexptefp, 5, 6);
GEN_VXFORM_NOA_ENV(vlogefp, 5, 7);
GEN_VXFORM_NOA_ENV(vrfim, 5, 11);
GEN_VXFORM_NOA_ENV(vrfin, 5, 8);
GEN_VXFORM_NOA_ENV(vrfip, 5, 10);
GEN_VXFORM_NOA_ENV(vrfiz, 5, 9);
GEN_VXFORM_NOA(vprtybw, 1, 24);
GEN_VXFORM_NOA(vprtybd, 1, 24);
GEN_VXFORM_NOA(vprtybq, 1, 24);
static void gen_vsplt(DisasContext *ctx, int vece)
{
int uimm, dofs, bofs;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
uimm = UIMM5(ctx->opcode);
bofs = avr_full_offset(rB(ctx->opcode));
dofs = avr_full_offset(rD(ctx->opcode));
/* Experimental testing shows that hardware masks the immediate. */
bofs += (uimm << vece) & 15;
#ifndef HOST_WORDS_BIGENDIAN
bofs ^= 15;
bofs &= ~((1 << vece) - 1);
#endif
tcg_gen_gvec_dup_mem(vece, dofs, bofs, 16, 16);
}
#define GEN_VXFORM_VSPLT(name, vece, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) { gen_vsplt(ctx, vece); }
#define GEN_VXFORM_UIMM_ENV(name, opc2, opc3) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr rb, rd; \
TCGv_i32 uimm; \
\
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
uimm = tcg_const_i32(UIMM5(ctx->opcode)); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(cpu_env, rd, rb, uimm); \
tcg_temp_free_i32(uimm); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
#define GEN_VXFORM_UIMM_SPLAT(name, opc2, opc3, splat_max) \
static void glue(gen_, name)(DisasContext *ctx) \
{ \
TCGv_ptr rb, rd; \
uint8_t uimm = UIMM4(ctx->opcode); \
TCGv_i32 t0; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
if (uimm > splat_max) { \
uimm = 0; \
} \
t0 = tcg_temp_new_i32(); \
tcg_gen_movi_i32(t0, uimm); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
gen_helper_##name(rd, rb, t0); \
tcg_temp_free_i32(t0); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
}
GEN_VXFORM_VSPLT(vspltb, MO_8, 6, 8);
GEN_VXFORM_VSPLT(vsplth, MO_16, 6, 9);
GEN_VXFORM_VSPLT(vspltw, MO_32, 6, 10);
GEN_VXFORM_UIMM_SPLAT(vextractub, 6, 8, 15);
GEN_VXFORM_UIMM_SPLAT(vextractuh, 6, 9, 14);
GEN_VXFORM_UIMM_SPLAT(vextractuw, 6, 10, 12);
GEN_VXFORM_UIMM_SPLAT(vextractd, 6, 11, 8);
GEN_VXFORM_UIMM_ENV(vcfux, 5, 12);
GEN_VXFORM_UIMM_ENV(vcfsx, 5, 13);
GEN_VXFORM_UIMM_ENV(vctuxs, 5, 14);
GEN_VXFORM_UIMM_ENV(vctsxs, 5, 15);
GEN_VXFORM_DUAL(vspltb, PPC_ALTIVEC, PPC_NONE,
vextractub, PPC_NONE, PPC2_ISA300);
GEN_VXFORM_DUAL(vsplth, PPC_ALTIVEC, PPC_NONE,
vextractuh, PPC_NONE, PPC2_ISA300);
GEN_VXFORM_DUAL(vspltw, PPC_ALTIVEC, PPC_NONE,
vextractuw, PPC_NONE, PPC2_ISA300);
static bool do_vextdx(DisasContext *ctx, arg_VA *a, int size, bool right,
void (*gen_helper)(TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv_ptr, TCGv))
{
TCGv_ptr vrt, vra, vrb;
TCGv rc;
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
vrt = gen_avr_ptr(a->vrt);
vra = gen_avr_ptr(a->vra);
vrb = gen_avr_ptr(a->vrb);
rc = tcg_temp_new();
tcg_gen_andi_tl(rc, cpu_gpr[a->rc], 0x1F);
if (right) {
tcg_gen_subfi_tl(rc, 32 - size, rc);
}
gen_helper(cpu_env, vrt, vra, vrb, rc);
tcg_temp_free_ptr(vrt);
tcg_temp_free_ptr(vra);
tcg_temp_free_ptr(vrb);
tcg_temp_free(rc);
return true;
}
TRANS(VEXTDUBVLX, do_vextdx, 1, false, gen_helper_VEXTDUBVLX)
TRANS(VEXTDUHVLX, do_vextdx, 2, false, gen_helper_VEXTDUHVLX)
TRANS(VEXTDUWVLX, do_vextdx, 4, false, gen_helper_VEXTDUWVLX)
TRANS(VEXTDDVLX, do_vextdx, 8, false, gen_helper_VEXTDDVLX)
TRANS(VEXTDUBVRX, do_vextdx, 1, true, gen_helper_VEXTDUBVLX)
TRANS(VEXTDUHVRX, do_vextdx, 2, true, gen_helper_VEXTDUHVLX)
TRANS(VEXTDUWVRX, do_vextdx, 4, true, gen_helper_VEXTDUWVLX)
TRANS(VEXTDDVRX, do_vextdx, 8, true, gen_helper_VEXTDDVLX)
static bool do_vinsx(DisasContext *ctx, int vrt, int size, bool right, TCGv ra,
TCGv_i64 rb, void (*gen_helper)(TCGv_ptr, TCGv_ptr, TCGv_i64, TCGv))
{
TCGv_ptr t;
TCGv idx;
t = gen_avr_ptr(vrt);
idx = tcg_temp_new();
tcg_gen_andi_tl(idx, ra, 0xF);
if (right) {
tcg_gen_subfi_tl(idx, 16 - size, idx);
}
gen_helper(cpu_env, t, rb, idx);
tcg_temp_free_ptr(t);
tcg_temp_free(idx);
return true;
}
static bool do_vinsvx(DisasContext *ctx, int vrt, int size, bool right, TCGv ra,
int vrb, void (*gen_helper)(TCGv_ptr, TCGv_ptr, TCGv_i64, TCGv))
{
bool ok;
TCGv_i64 val;
val = tcg_temp_new_i64();
get_avr64(val, vrb, true);
ok = do_vinsx(ctx, vrt, size, right, ra, val, gen_helper);
tcg_temp_free_i64(val);
return ok;
}
static bool do_vinsx_VX(DisasContext *ctx, arg_VX *a, int size, bool right,
void (*gen_helper)(TCGv_ptr, TCGv_ptr, TCGv_i64, TCGv))
{
bool ok;
TCGv_i64 val;
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
val = tcg_temp_new_i64();
tcg_gen_extu_tl_i64(val, cpu_gpr[a->vrb]);
ok = do_vinsx(ctx, a->vrt, size, right, cpu_gpr[a->vra], val, gen_helper);
tcg_temp_free_i64(val);
return ok;
}
static bool do_vinsvx_VX(DisasContext *ctx, arg_VX *a, int size, bool right,
void (*gen_helper)(TCGv_ptr, TCGv_ptr, TCGv_i64, TCGv))
{
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
return do_vinsvx(ctx, a->vrt, size, right, cpu_gpr[a->vra], a->vrb,
gen_helper);
}
static bool do_vins_VX_uim4(DisasContext *ctx, arg_VX_uim4 *a, int size,
void (*gen_helper)(TCGv_ptr, TCGv_ptr, TCGv_i64, TCGv))
{
bool ok;
TCGv_i64 val;
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
if (a->uim > (16 - size)) {
/*
* PowerISA v3.1 says that the resulting value is undefined in this
* case, so just log a guest error and leave VRT unchanged. The
* real hardware would do a partial insert, e.g. if VRT is zeroed and
* RB is 0x12345678, executing "vinsw VRT,RB,14" results in
* VRT = 0x0000...00001234, but we don't bother to reproduce this
* behavior as software shouldn't rely on it.
*/
qemu_log_mask(LOG_GUEST_ERROR, "Invalid index for VINS* at"
" 0x" TARGET_FMT_lx ", UIM = %d > %d\n", ctx->cia, a->uim,
16 - size);
return true;
}
val = tcg_temp_new_i64();
tcg_gen_extu_tl_i64(val, cpu_gpr[a->vrb]);
ok = do_vinsx(ctx, a->vrt, size, false, tcg_constant_tl(a->uim), val,
gen_helper);
tcg_temp_free_i64(val);
return ok;
}
static bool do_vinsert_VX_uim4(DisasContext *ctx, arg_VX_uim4 *a, int size,
void (*gen_helper)(TCGv_ptr, TCGv_ptr, TCGv_i64, TCGv))
{
REQUIRE_INSNS_FLAGS2(ctx, ISA300);
REQUIRE_VECTOR(ctx);
if (a->uim > (16 - size)) {
qemu_log_mask(LOG_GUEST_ERROR, "Invalid index for VINSERT* at"
" 0x" TARGET_FMT_lx ", UIM = %d > %d\n", ctx->cia, a->uim,
16 - size);
return true;
}
return do_vinsvx(ctx, a->vrt, size, false, tcg_constant_tl(a->uim), a->vrb,
gen_helper);
}
TRANS(VINSBLX, do_vinsx_VX, 1, false, gen_helper_VINSBLX)
TRANS(VINSHLX, do_vinsx_VX, 2, false, gen_helper_VINSHLX)
TRANS(VINSWLX, do_vinsx_VX, 4, false, gen_helper_VINSWLX)
TRANS(VINSDLX, do_vinsx_VX, 8, false, gen_helper_VINSDLX)
TRANS(VINSBRX, do_vinsx_VX, 1, true, gen_helper_VINSBLX)
TRANS(VINSHRX, do_vinsx_VX, 2, true, gen_helper_VINSHLX)
TRANS(VINSWRX, do_vinsx_VX, 4, true, gen_helper_VINSWLX)
TRANS(VINSDRX, do_vinsx_VX, 8, true, gen_helper_VINSDLX)
TRANS(VINSW, do_vins_VX_uim4, 4, gen_helper_VINSWLX)
TRANS(VINSD, do_vins_VX_uim4, 8, gen_helper_VINSDLX)
TRANS(VINSBVLX, do_vinsvx_VX, 1, false, gen_helper_VINSBLX)
TRANS(VINSHVLX, do_vinsvx_VX, 2, false, gen_helper_VINSHLX)
TRANS(VINSWVLX, do_vinsvx_VX, 4, false, gen_helper_VINSWLX)
TRANS(VINSBVRX, do_vinsvx_VX, 1, true, gen_helper_VINSBLX)
TRANS(VINSHVRX, do_vinsvx_VX, 2, true, gen_helper_VINSHLX)
TRANS(VINSWVRX, do_vinsvx_VX, 4, true, gen_helper_VINSWLX)
TRANS(VINSERTB, do_vinsert_VX_uim4, 1, gen_helper_VINSBLX)
TRANS(VINSERTH, do_vinsert_VX_uim4, 2, gen_helper_VINSHLX)
TRANS(VINSERTW, do_vinsert_VX_uim4, 4, gen_helper_VINSWLX)
TRANS(VINSERTD, do_vinsert_VX_uim4, 8, gen_helper_VINSDLX)
static void gen_vsldoi(DisasContext *ctx)
{
TCGv_ptr ra, rb, rd;
TCGv_i32 sh;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
ra = gen_avr_ptr(rA(ctx->opcode));
rb = gen_avr_ptr(rB(ctx->opcode));
rd = gen_avr_ptr(rD(ctx->opcode));
sh = tcg_const_i32(VSH(ctx->opcode));
gen_helper_vsldoi(rd, ra, rb, sh);
tcg_temp_free_ptr(ra);
tcg_temp_free_ptr(rb);
tcg_temp_free_ptr(rd);
tcg_temp_free_i32(sh);
}
static bool trans_VSLDBI(DisasContext *ctx, arg_VN *a)
{
TCGv_i64 t0, t1, t2;
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
t0 = tcg_temp_new_i64();
t1 = tcg_temp_new_i64();
get_avr64(t0, a->vra, true);
get_avr64(t1, a->vra, false);
if (a->sh != 0) {
t2 = tcg_temp_new_i64();
get_avr64(t2, a->vrb, true);
tcg_gen_extract2_i64(t0, t1, t0, 64 - a->sh);
tcg_gen_extract2_i64(t1, t2, t1, 64 - a->sh);
tcg_temp_free_i64(t2);
}
set_avr64(a->vrt, t0, true);
set_avr64(a->vrt, t1, false);
tcg_temp_free_i64(t0);
tcg_temp_free_i64(t1);
return true;
}
static bool trans_VSRDBI(DisasContext *ctx, arg_VN *a)
{
TCGv_i64 t2, t1, t0;
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
t0 = tcg_temp_new_i64();
t1 = tcg_temp_new_i64();
get_avr64(t0, a->vrb, false);
get_avr64(t1, a->vrb, true);
if (a->sh != 0) {
t2 = tcg_temp_new_i64();
get_avr64(t2, a->vra, false);
tcg_gen_extract2_i64(t0, t0, t1, a->sh);
tcg_gen_extract2_i64(t1, t1, t2, a->sh);
tcg_temp_free_i64(t2);
}
set_avr64(a->vrt, t0, false);
set_avr64(a->vrt, t1, true);
tcg_temp_free_i64(t0);
tcg_temp_free_i64(t1);
return true;
}
#define GEN_VAFORM_PAIRED(name0, name1, opc2) \
static void glue(gen_, name0##_##name1)(DisasContext *ctx) \
{ \
TCGv_ptr ra, rb, rc, rd; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
ra = gen_avr_ptr(rA(ctx->opcode)); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rc = gen_avr_ptr(rC(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
if (Rc(ctx->opcode)) { \
gen_helper_##name1(cpu_env, rd, ra, rb, rc); \
} else { \
gen_helper_##name0(cpu_env, rd, ra, rb, rc); \
} \
tcg_temp_free_ptr(ra); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rc); \
tcg_temp_free_ptr(rd); \
}
GEN_VAFORM_PAIRED(vmhaddshs, vmhraddshs, 16)
static void gen_vmladduhm(DisasContext *ctx)
{
TCGv_ptr ra, rb, rc, rd;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
ra = gen_avr_ptr(rA(ctx->opcode));
rb = gen_avr_ptr(rB(ctx->opcode));
rc = gen_avr_ptr(rC(ctx->opcode));
rd = gen_avr_ptr(rD(ctx->opcode));
gen_helper_vmladduhm(rd, ra, rb, rc);
tcg_temp_free_ptr(ra);
tcg_temp_free_ptr(rb);
tcg_temp_free_ptr(rc);
tcg_temp_free_ptr(rd);
}
static void gen_vpermr(DisasContext *ctx)
{
TCGv_ptr ra, rb, rc, rd;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
ra = gen_avr_ptr(rA(ctx->opcode));
rb = gen_avr_ptr(rB(ctx->opcode));
rc = gen_avr_ptr(rC(ctx->opcode));
rd = gen_avr_ptr(rD(ctx->opcode));
gen_helper_vpermr(cpu_env, rd, ra, rb, rc);
tcg_temp_free_ptr(ra);
tcg_temp_free_ptr(rb);
tcg_temp_free_ptr(rc);
tcg_temp_free_ptr(rd);
}
GEN_VAFORM_PAIRED(vmsumubm, vmsummbm, 18)
GEN_VAFORM_PAIRED(vmsumuhm, vmsumuhs, 19)
GEN_VAFORM_PAIRED(vmsumshm, vmsumshs, 20)
GEN_VAFORM_PAIRED(vsel, vperm, 21)
GEN_VAFORM_PAIRED(vmaddfp, vnmsubfp, 23)
GEN_VXFORM_NOA(vclzb, 1, 28)
GEN_VXFORM_NOA(vclzh, 1, 29)
GEN_VXFORM_TRANS(vclzw, 1, 30)
GEN_VXFORM_TRANS(vclzd, 1, 31)
GEN_VXFORM_NOA_2(vnegw, 1, 24, 6)
GEN_VXFORM_NOA_2(vnegd, 1, 24, 7)
GEN_VXFORM_NOA_2(vextsb2w, 1, 24, 16)
GEN_VXFORM_NOA_2(vextsh2w, 1, 24, 17)
GEN_VXFORM_NOA_2(vextsb2d, 1, 24, 24)
GEN_VXFORM_NOA_2(vextsh2d, 1, 24, 25)
GEN_VXFORM_NOA_2(vextsw2d, 1, 24, 26)
GEN_VXFORM_NOA_2(vctzb, 1, 24, 28)
GEN_VXFORM_NOA_2(vctzh, 1, 24, 29)
GEN_VXFORM_NOA_2(vctzw, 1, 24, 30)
GEN_VXFORM_NOA_2(vctzd, 1, 24, 31)
GEN_VXFORM_NOA_3(vclzlsbb, 1, 24, 0)
GEN_VXFORM_NOA_3(vctzlsbb, 1, 24, 1)
GEN_VXFORM_NOA(vpopcntb, 1, 28)
GEN_VXFORM_NOA(vpopcnth, 1, 29)
GEN_VXFORM_NOA(vpopcntw, 1, 30)
GEN_VXFORM_NOA(vpopcntd, 1, 31)
GEN_VXFORM_DUAL(vclzb, PPC_NONE, PPC2_ALTIVEC_207, \
vpopcntb, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vclzh, PPC_NONE, PPC2_ALTIVEC_207, \
vpopcnth, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vclzw, PPC_NONE, PPC2_ALTIVEC_207, \
vpopcntw, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vclzd, PPC_NONE, PPC2_ALTIVEC_207, \
vpopcntd, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM(vbpermd, 6, 23);
GEN_VXFORM(vbpermq, 6, 21);
target/ppc: Optimize emulation of vgbbd instruction Optimize altivec instruction vgbbd (Vector Gather Bits by Bytes by Doubleword) All ith bits (i in range 1 to 8) of each byte of doubleword element in source register are concatenated and placed into ith byte of appropriate doubleword element in destination register. Following solution is done for both doubleword elements of source register in parallel, in order to reduce the number of instructions needed(that's why arrays are used): First, both doubleword elements of source register vB are placed in appropriate element of array avr. Bits are gathered in 2x8 iterations(2 for loops). In first iteration bit 1 of byte 1, bit 2 of byte 2,... bit 8 of byte 8 are in their final spots so avr[i], i={0,1} can be and-ed with tcg_mask. For every following iteration, both avr[i] and tcg_mask variables have to be shifted right for 7 and 8 places, respectively, in order to get bit 1 of byte 2, bit 2 of byte 3.. bit 7 of byte 8 in their final spots so shifted avr values(saved in tmp) can be and-ed with new value of tcg_mask... After first 8 iteration(first loop), all the first bits are in their final places, all second bits but second bit from eight byte are in their places... only 1 eight bit from eight byte is in it's place). In second loop we do all operations symmetrically, in order to get other half of bits in their final spots. Results for first and second doubleword elements are saved in result[0] and result[1] respectively. In the end those results are saved in appropriate doubleword element of destination register vD. Signed-off-by: Stefan Brankovic <stefan.brankovic@rt-rk.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1563200574-11098-5-git-send-email-stefan.brankovic@rt-rk.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-15 17:22:50 +03:00
GEN_VXFORM_TRANS(vgbbd, 6, 20);
GEN_VXFORM(vpmsumb, 4, 16)
GEN_VXFORM(vpmsumh, 4, 17)
GEN_VXFORM(vpmsumw, 4, 18)
GEN_VXFORM(vpmsumd, 4, 19)
#define GEN_BCD(op) \
static void gen_##op(DisasContext *ctx) \
{ \
TCGv_ptr ra, rb, rd; \
TCGv_i32 ps; \
\
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
\
ra = gen_avr_ptr(rA(ctx->opcode)); \
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
\
ps = tcg_const_i32((ctx->opcode & 0x200) != 0); \
\
gen_helper_##op(cpu_crf[6], rd, ra, rb, ps); \
\
tcg_temp_free_ptr(ra); \
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
tcg_temp_free_i32(ps); \
}
#define GEN_BCD2(op) \
static void gen_##op(DisasContext *ctx) \
{ \
TCGv_ptr rd, rb; \
TCGv_i32 ps; \
\
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
\
rb = gen_avr_ptr(rB(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
\
ps = tcg_const_i32((ctx->opcode & 0x200) != 0); \
\
gen_helper_##op(cpu_crf[6], rd, rb, ps); \
\
tcg_temp_free_ptr(rb); \
tcg_temp_free_ptr(rd); \
tcg_temp_free_i32(ps); \
}
GEN_BCD(bcdadd)
GEN_BCD(bcdsub)
GEN_BCD2(bcdcfn)
GEN_BCD2(bcdctn)
GEN_BCD2(bcdcfz)
GEN_BCD2(bcdctz)
GEN_BCD2(bcdcfsq)
GEN_BCD2(bcdctsq)
GEN_BCD2(bcdsetsgn)
GEN_BCD(bcdcpsgn);
GEN_BCD(bcds);
GEN_BCD(bcdus);
GEN_BCD(bcdsr);
GEN_BCD(bcdtrunc);
GEN_BCD(bcdutrunc);
static void gen_xpnd04_1(DisasContext *ctx)
{
switch (opc4(ctx->opcode)) {
case 0:
gen_bcdctsq(ctx);
break;
case 2:
gen_bcdcfsq(ctx);
break;
case 4:
gen_bcdctz(ctx);
break;
case 5:
gen_bcdctn(ctx);
break;
case 6:
gen_bcdcfz(ctx);
break;
case 7:
gen_bcdcfn(ctx);
break;
case 31:
gen_bcdsetsgn(ctx);
break;
default:
gen_invalid(ctx);
break;
}
}
static void gen_xpnd04_2(DisasContext *ctx)
{
switch (opc4(ctx->opcode)) {
case 0:
gen_bcdctsq(ctx);
break;
case 2:
gen_bcdcfsq(ctx);
break;
case 4:
gen_bcdctz(ctx);
break;
case 6:
gen_bcdcfz(ctx);
break;
case 7:
gen_bcdcfn(ctx);
break;
case 31:
gen_bcdsetsgn(ctx);
break;
default:
gen_invalid(ctx);
break;
}
}
GEN_VXFORM_DUAL(vsubcuw, PPC_ALTIVEC, PPC_NONE, \
xpnd04_1, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_DUAL(vsubsws, PPC_ALTIVEC, PPC_NONE, \
xpnd04_2, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_DUAL(vsububm, PPC_ALTIVEC, PPC_NONE, \
bcdadd, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vsububs, PPC_ALTIVEC, PPC_NONE, \
bcdadd, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vsubuhm, PPC_ALTIVEC, PPC_NONE, \
bcdsub, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vsubuhs, PPC_ALTIVEC, PPC_NONE, \
bcdsub, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vaddshs, PPC_ALTIVEC, PPC_NONE, \
bcdcpsgn, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_DUAL(vsubudm, PPC2_ALTIVEC_207, PPC_NONE, \
bcds, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_DUAL(vsubuwm, PPC_ALTIVEC, PPC_NONE, \
bcdus, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_DUAL(vsubsbs, PPC_ALTIVEC, PPC_NONE, \
bcdtrunc, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_DUAL(vsubuqm, PPC2_ALTIVEC_207, PPC_NONE, \
bcdtrunc, PPC_NONE, PPC2_ISA300)
GEN_VXFORM_DUAL(vsubcuq, PPC2_ALTIVEC_207, PPC_NONE, \
bcdutrunc, PPC_NONE, PPC2_ISA300)
static void gen_vsbox(DisasContext *ctx)
{
TCGv_ptr ra, rd;
if (unlikely(!ctx->altivec_enabled)) {
gen_exception(ctx, POWERPC_EXCP_VPU);
return;
}
ra = gen_avr_ptr(rA(ctx->opcode));
rd = gen_avr_ptr(rD(ctx->opcode));
gen_helper_vsbox(rd, ra);
tcg_temp_free_ptr(ra);
tcg_temp_free_ptr(rd);
}
GEN_VXFORM(vcipher, 4, 20)
GEN_VXFORM(vcipherlast, 4, 20)
GEN_VXFORM(vncipher, 4, 21)
GEN_VXFORM(vncipherlast, 4, 21)
GEN_VXFORM_DUAL(vcipher, PPC_NONE, PPC2_ALTIVEC_207,
vcipherlast, PPC_NONE, PPC2_ALTIVEC_207)
GEN_VXFORM_DUAL(vncipher, PPC_NONE, PPC2_ALTIVEC_207,
vncipherlast, PPC_NONE, PPC2_ALTIVEC_207)
#define VSHASIGMA(op) \
static void gen_##op(DisasContext *ctx) \
{ \
TCGv_ptr ra, rd; \
TCGv_i32 st_six; \
if (unlikely(!ctx->altivec_enabled)) { \
gen_exception(ctx, POWERPC_EXCP_VPU); \
return; \
} \
ra = gen_avr_ptr(rA(ctx->opcode)); \
rd = gen_avr_ptr(rD(ctx->opcode)); \
st_six = tcg_const_i32(rB(ctx->opcode)); \
gen_helper_##op(rd, ra, st_six); \
tcg_temp_free_ptr(ra); \
tcg_temp_free_ptr(rd); \
tcg_temp_free_i32(st_six); \
}
VSHASIGMA(vshasigmaw)
VSHASIGMA(vshasigmad)
GEN_VXFORM3(vpermxor, 22, 0xFF)
GEN_VXFORM_DUAL(vsldoi, PPC_ALTIVEC, PPC_NONE,
vpermxor, PPC_NONE, PPC2_ALTIVEC_207)
static bool trans_VCFUGED(DisasContext *ctx, arg_VX *a)
{
static const GVecGen3 g = {
.fni8 = gen_helper_CFUGED,
.vece = MO_64,
};
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
tcg_gen_gvec_3(avr_full_offset(a->vrt), avr_full_offset(a->vra),
avr_full_offset(a->vrb), 16, 16, &g);
return true;
}
static bool trans_VCLZDM(DisasContext *ctx, arg_VX *a)
{
static const GVecGen3i g = {
.fni8 = do_cntzdm,
.vece = MO_64,
};
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
tcg_gen_gvec_3i(avr_full_offset(a->vrt), avr_full_offset(a->vra),
avr_full_offset(a->vrb), 16, 16, false, &g);
return true;
}
static bool trans_VCTZDM(DisasContext *ctx, arg_VX *a)
{
static const GVecGen3i g = {
.fni8 = do_cntzdm,
.vece = MO_64,
};
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
tcg_gen_gvec_3i(avr_full_offset(a->vrt), avr_full_offset(a->vra),
avr_full_offset(a->vrb), 16, 16, true, &g);
return true;
}
static bool trans_VPDEPD(DisasContext *ctx, arg_VX *a)
{
static const GVecGen3 g = {
.fni8 = gen_helper_PDEPD,
.vece = MO_64,
};
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
tcg_gen_gvec_3(avr_full_offset(a->vrt), avr_full_offset(a->vra),
avr_full_offset(a->vrb), 16, 16, &g);
return true;
}
static bool trans_VPEXTD(DisasContext *ctx, arg_VX *a)
{
static const GVecGen3 g = {
.fni8 = gen_helper_PEXTD,
.vece = MO_64,
};
REQUIRE_INSNS_FLAGS2(ctx, ISA310);
REQUIRE_VECTOR(ctx);
tcg_gen_gvec_3(avr_full_offset(a->vrt), avr_full_offset(a->vra),
avr_full_offset(a->vrb), 16, 16, &g);
return true;
}
#undef GEN_VR_LDX
#undef GEN_VR_STX
#undef GEN_VR_LVE
#undef GEN_VR_STVE
#undef GEN_VX_LOGICAL
#undef GEN_VX_LOGICAL_207
#undef GEN_VXFORM
#undef GEN_VXFORM_207
#undef GEN_VXFORM_DUAL
#undef GEN_VXRFORM_DUAL
#undef GEN_VXRFORM1
#undef GEN_VXRFORM
#undef GEN_VXFORM_VSPLTI
#undef GEN_VXFORM_NOA
#undef GEN_VXFORM_UIMM
#undef GEN_VAFORM_PAIRED
#undef GEN_BCD2