qemu/hw/scsi/esp.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1580 lines
41 KiB
C
Raw Normal View History

/*
* QEMU ESP/NCR53C9x emulation
*
* Copyright (c) 2005-2006 Fabrice Bellard
* Copyright (c) 2012 Herve Poussineau
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "migration/vmstate.h"
#include "hw/irq.h"
#include "hw/scsi/esp.h"
#include "trace.h"
#include "qemu/log.h"
#include "qemu/module.h"
/*
* On Sparc32, this is the ESP (NCR53C90) part of chip STP2000 (Master I/O),
* also produced as NCR89C100. See
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
* and
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
*
* On Macintosh Quadra it is a NCR53C96.
*/
static void esp_raise_irq(ESPState *s)
{
if (!(s->rregs[ESP_RSTAT] & STAT_INT)) {
s->rregs[ESP_RSTAT] |= STAT_INT;
qemu_irq_raise(s->irq);
trace_esp_raise_irq();
}
}
static void esp_lower_irq(ESPState *s)
{
if (s->rregs[ESP_RSTAT] & STAT_INT) {
s->rregs[ESP_RSTAT] &= ~STAT_INT;
qemu_irq_lower(s->irq);
trace_esp_lower_irq();
}
}
static void esp_raise_drq(ESPState *s)
{
qemu_irq_raise(s->irq_data);
trace_esp_raise_drq();
}
static void esp_lower_drq(ESPState *s)
{
qemu_irq_lower(s->irq_data);
trace_esp_lower_drq();
}
void esp_dma_enable(ESPState *s, int irq, int level)
{
if (level) {
s->dma_enabled = 1;
trace_esp_dma_enable();
if (s->dma_cb) {
s->dma_cb(s);
s->dma_cb = NULL;
}
} else {
trace_esp_dma_disable();
s->dma_enabled = 0;
}
}
void esp_request_cancelled(SCSIRequest *req)
{
ESPState *s = req->hba_private;
if (req == s->current_req) {
scsi_req_unref(s->current_req);
s->current_req = NULL;
s->current_dev = NULL;
s->async_len = 0;
}
}
static void esp_fifo_push(Fifo8 *fifo, uint8_t val)
{
if (fifo8_num_used(fifo) == fifo->capacity) {
trace_esp_error_fifo_overrun();
return;
}
fifo8_push(fifo, val);
}
static uint8_t esp_fifo_pop(Fifo8 *fifo)
{
if (fifo8_is_empty(fifo)) {
return 0;
}
return fifo8_pop(fifo);
}
static uint32_t esp_fifo_pop_buf(Fifo8 *fifo, uint8_t *dest, int maxlen)
{
const uint8_t *buf;
uint32_t n, n2;
int len;
if (maxlen == 0) {
return 0;
}
len = maxlen;
buf = fifo8_pop_buf(fifo, len, &n);
if (dest) {
memcpy(dest, buf, n);
}
/* Add FIFO wraparound if needed */
len -= n;
len = MIN(len, fifo8_num_used(fifo));
if (len) {
buf = fifo8_pop_buf(fifo, len, &n2);
if (dest) {
memcpy(&dest[n], buf, n2);
}
n += n2;
}
return n;
}
static uint32_t esp_get_tc(ESPState *s)
{
uint32_t dmalen;
dmalen = s->rregs[ESP_TCLO];
dmalen |= s->rregs[ESP_TCMID] << 8;
dmalen |= s->rregs[ESP_TCHI] << 16;
return dmalen;
}
static void esp_set_tc(ESPState *s, uint32_t dmalen)
{
uint32_t old_tc = esp_get_tc(s);
s->rregs[ESP_TCLO] = dmalen;
s->rregs[ESP_TCMID] = dmalen >> 8;
s->rregs[ESP_TCHI] = dmalen >> 16;
if (old_tc && dmalen == 0) {
s->rregs[ESP_RSTAT] |= STAT_TC;
}
}
static uint32_t esp_get_stc(ESPState *s)
{
uint32_t dmalen;
dmalen = s->wregs[ESP_TCLO];
dmalen |= s->wregs[ESP_TCMID] << 8;
dmalen |= s->wregs[ESP_TCHI] << 16;
return dmalen;
}
static const char *esp_phase_names[8] = {
"DATA OUT", "DATA IN", "COMMAND", "STATUS",
"(reserved)", "(reserved)", "MESSAGE OUT", "MESSAGE IN"
};
static void esp_set_phase(ESPState *s, uint8_t phase)
{
s->rregs[ESP_RSTAT] &= ~7;
s->rregs[ESP_RSTAT] |= phase;
trace_esp_set_phase(esp_phase_names[phase]);
}
static uint8_t esp_pdma_read(ESPState *s)
{
uint8_t val;
val = esp_fifo_pop(&s->fifo);
return val;
}
static void esp_pdma_write(ESPState *s, uint8_t val)
{
uint32_t dmalen = esp_get_tc(s);
if (dmalen == 0) {
return;
}
esp_fifo_push(&s->fifo, val);
dmalen--;
esp_set_tc(s, dmalen);
}
static void esp_set_pdma_cb(ESPState *s, enum pdma_cb cb)
{
s->pdma_cb = cb;
}
static int esp_select(ESPState *s)
{
int target;
target = s->wregs[ESP_WBUSID] & BUSID_DID;
s->ti_size = 0;
if (s->current_req) {
/* Started a new command before the old one finished. Cancel it. */
scsi_req_cancel(s->current_req);
}
s->current_dev = scsi_device_find(&s->bus, 0, target, 0);
if (!s->current_dev) {
/* No such drive */
s->rregs[ESP_RSTAT] = 0;
s->rregs[ESP_RINTR] = INTR_DC;
s->rregs[ESP_RSEQ] = SEQ_0;
esp_raise_irq(s);
return -1;
}
/*
* Note that we deliberately don't raise the IRQ here: this will be done
* either in do_command_phase() for DATA OUT transfers or by the deferred
* IRQ mechanism in esp_transfer_data() for DATA IN transfers
*/
s->rregs[ESP_RINTR] |= INTR_FC;
s->rregs[ESP_RSEQ] = SEQ_CD;
return 0;
}
static uint32_t get_cmd(ESPState *s, uint32_t maxlen)
{
uint8_t buf[ESP_CMDFIFO_SZ];
uint32_t dmalen, n;
int target;
target = s->wregs[ESP_WBUSID] & BUSID_DID;
if (s->dma) {
dmalen = MIN(esp_get_tc(s), maxlen);
if (dmalen == 0) {
return 0;
}
if (s->dma_memory_read) {
s->dma_memory_read(s->dma_opaque, buf, dmalen);
dmalen = MIN(fifo8_num_free(&s->cmdfifo), dmalen);
fifo8_push_all(&s->cmdfifo, buf, dmalen);
esp_set_tc(s, esp_get_tc(s) - dmalen);
} else {
return 0;
}
} else {
dmalen = MIN(fifo8_num_used(&s->fifo), maxlen);
if (dmalen == 0) {
return 0;
}
n = esp_fifo_pop_buf(&s->fifo, buf, dmalen);
n = MIN(fifo8_num_free(&s->cmdfifo), n);
fifo8_push_all(&s->cmdfifo, buf, n);
}
trace_esp_get_cmd(dmalen, target);
return dmalen;
}
static void do_command_phase(ESPState *s)
{
uint32_t cmdlen;
int32_t datalen;
SCSIDevice *current_lun;
uint8_t buf[ESP_CMDFIFO_SZ];
trace_esp_do_command_phase(s->lun);
cmdlen = fifo8_num_used(&s->cmdfifo);
if (!cmdlen || !s->current_dev) {
return;
}
esp_fifo_pop_buf(&s->cmdfifo, buf, cmdlen);
current_lun = scsi_device_find(&s->bus, 0, s->current_dev->id, s->lun);
if (!current_lun) {
/* No such drive */
s->rregs[ESP_RSTAT] = 0;
s->rregs[ESP_RINTR] = INTR_DC;
s->rregs[ESP_RSEQ] = SEQ_0;
esp_raise_irq(s);
return;
}
s->current_req = scsi_req_new(current_lun, 0, s->lun, buf, cmdlen, s);
datalen = scsi_req_enqueue(s->current_req);
s->ti_size = datalen;
fifo8_reset(&s->cmdfifo);
if (datalen != 0) {
s->ti_cmd = 0;
if (datalen > 0) {
/*
* Switch to DATA IN phase but wait until initial data xfer is
* complete before raising the command completion interrupt
*/
s->data_in_ready = false;
esp_set_phase(s, STAT_DI);
} else {
esp_set_phase(s, STAT_DO);
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
esp_raise_irq(s);
esp_lower_drq(s);
}
scsi_req_continue(s->current_req);
return;
}
}
static void do_message_phase(ESPState *s)
{
if (s->cmdfifo_cdb_offset) {
uint8_t message = esp_fifo_pop(&s->cmdfifo);
trace_esp_do_identify(message);
s->lun = message & 7;
s->cmdfifo_cdb_offset--;
}
/* Ignore extended messages for now */
if (s->cmdfifo_cdb_offset) {
int len = MIN(s->cmdfifo_cdb_offset, fifo8_num_used(&s->cmdfifo));
esp_fifo_pop_buf(&s->cmdfifo, NULL, len);
s->cmdfifo_cdb_offset = 0;
}
}
static void do_cmd(ESPState *s)
{
do_message_phase(s);
assert(s->cmdfifo_cdb_offset == 0);
do_command_phase(s);
}
static void satn_pdma_cb(ESPState *s)
{
uint8_t buf[ESP_FIFO_SZ];
int n;
/* Copy FIFO into cmdfifo */
n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
n = MIN(fifo8_num_free(&s->cmdfifo), n);
fifo8_push_all(&s->cmdfifo, buf, n);
if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
s->cmdfifo_cdb_offset = 1;
s->do_cmd = 0;
do_cmd(s);
}
}
static void handle_satn(ESPState *s)
{
int32_t cmdlen;
if (s->dma && !s->dma_enabled) {
s->dma_cb = handle_satn;
return;
}
esp_set_pdma_cb(s, SATN_PDMA_CB);
if (esp_select(s) < 0) {
return;
}
cmdlen = get_cmd(s, ESP_CMDFIFO_SZ);
if (cmdlen > 0) {
s->cmdfifo_cdb_offset = 1;
s->do_cmd = 0;
do_cmd(s);
} else if (cmdlen == 0) {
if (s->dma) {
esp_raise_drq(s);
}
s->do_cmd = 1;
/* Target present, but no cmd yet - switch to command phase */
s->rregs[ESP_RSEQ] = SEQ_CD;
esp_set_phase(s, STAT_CD);
}
}
static void s_without_satn_pdma_cb(ESPState *s)
{
uint8_t buf[ESP_FIFO_SZ];
int n;
/* Copy FIFO into cmdfifo */
n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
n = MIN(fifo8_num_free(&s->cmdfifo), n);
fifo8_push_all(&s->cmdfifo, buf, n);
if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
s->cmdfifo_cdb_offset = 0;
s->do_cmd = 0;
do_cmd(s);
}
}
static void handle_s_without_atn(ESPState *s)
{
int32_t cmdlen;
if (s->dma && !s->dma_enabled) {
s->dma_cb = handle_s_without_atn;
return;
}
esp_set_pdma_cb(s, S_WITHOUT_SATN_PDMA_CB);
if (esp_select(s) < 0) {
return;
}
cmdlen = get_cmd(s, ESP_CMDFIFO_SZ);
if (cmdlen > 0) {
s->cmdfifo_cdb_offset = 0;
s->do_cmd = 0;
do_cmd(s);
} else if (cmdlen == 0) {
if (s->dma) {
esp_raise_drq(s);
}
s->do_cmd = 1;
/* Target present, but no cmd yet - switch to command phase */
s->rregs[ESP_RSEQ] = SEQ_CD;
esp_set_phase(s, STAT_CD);
}
}
static void satn_stop_pdma_cb(ESPState *s)
{
uint8_t buf[ESP_FIFO_SZ];
int n;
/* Copy FIFO into cmdfifo */
n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
n = MIN(fifo8_num_free(&s->cmdfifo), n);
fifo8_push_all(&s->cmdfifo, buf, n);
if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
trace_esp_handle_satn_stop(fifo8_num_used(&s->cmdfifo));
s->do_cmd = 1;
s->cmdfifo_cdb_offset = 1;
esp_set_phase(s, STAT_CD);
s->rregs[ESP_RSTAT] |= STAT_TC;
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
s->rregs[ESP_RSEQ] = SEQ_CD;
esp_raise_irq(s);
}
}
static void handle_satn_stop(ESPState *s)
{
int32_t cmdlen;
if (s->dma && !s->dma_enabled) {
s->dma_cb = handle_satn_stop;
return;
}
esp_set_pdma_cb(s, SATN_STOP_PDMA_CB);
if (esp_select(s) < 0) {
return;
}
cmdlen = get_cmd(s, 1);
if (cmdlen > 0) {
trace_esp_handle_satn_stop(fifo8_num_used(&s->cmdfifo));
s->do_cmd = 1;
s->cmdfifo_cdb_offset = 1;
esp_set_phase(s, STAT_MO);
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
s->rregs[ESP_RSEQ] = SEQ_MO;
esp_raise_irq(s);
} else if (cmdlen == 0) {
if (s->dma) {
esp_raise_drq(s);
}
s->do_cmd = 1;
/* Target present, switch to message out phase */
s->rregs[ESP_RSEQ] = SEQ_MO;
esp_set_phase(s, STAT_MO);
}
}
static void write_response_pdma_cb(ESPState *s)
{
esp_set_phase(s, STAT_ST);
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
s->rregs[ESP_RSEQ] = SEQ_CD;
esp_raise_irq(s);
}
static void write_response(ESPState *s)
{
uint8_t buf[2];
trace_esp_write_response(s->status);
buf[0] = s->status;
buf[1] = 0;
if (s->dma) {
if (s->dma_memory_write) {
s->dma_memory_write(s->dma_opaque, buf, 2);
esp_set_phase(s, STAT_ST);
s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
s->rregs[ESP_RSEQ] = SEQ_CD;
} else {
esp_set_pdma_cb(s, WRITE_RESPONSE_PDMA_CB);
esp_raise_drq(s);
return;
}
} else {
fifo8_reset(&s->fifo);
fifo8_push_all(&s->fifo, buf, 2);
s->rregs[ESP_RFLAGS] = 2;
}
esp_raise_irq(s);
}
static void esp_dma_done(ESPState *s)
{
s->rregs[ESP_RINTR] |= INTR_BS;
esp_raise_irq(s);
}
static void do_dma_pdma_cb(ESPState *s)
{
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
uint8_t buf[ESP_CMDFIFO_SZ];
int len;
uint32_t n;
if (s->do_cmd) {
/* Copy FIFO into cmdfifo */
n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
n = MIN(fifo8_num_free(&s->cmdfifo), n);
fifo8_push_all(&s->cmdfifo, buf, n);
/* Ensure we have received complete command after SATN and stop */
if (esp_get_tc(s) || fifo8_is_empty(&s->cmdfifo)) {
return;
}
s->ti_size = 0;
if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
/* No command received */
if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
return;
}
/* Command has been received */
s->do_cmd = 0;
do_cmd(s);
} else {
/*
* Extra message out bytes received: update cmdfifo_cdb_offset
* and then switch to command phase
*/
s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
esp_set_phase(s, STAT_CD);
s->rregs[ESP_RSEQ] = SEQ_CD;
s->rregs[ESP_RINTR] |= INTR_BS;
esp_raise_irq(s);
}
return;
}
if (!s->current_req) {
return;
}
if (to_device) {
/* Copy FIFO data to device */
len = MIN(s->async_len, ESP_FIFO_SZ);
len = MIN(len, fifo8_num_used(&s->fifo));
n = esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
s->async_buf += n;
s->async_len -= n;
s->ti_size += n;
if (n < len) {
/* Unaligned accesses can cause FIFO wraparound */
len = len - n;
n = esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
s->async_buf += n;
s->async_len -= n;
s->ti_size += n;
}
if (s->async_len == 0) {
scsi_req_continue(s->current_req);
return;
}
if (esp_get_tc(s) == 0) {
esp_lower_drq(s);
esp_dma_done(s);
}
return;
} else {
if (s->async_len == 0 && fifo8_num_used(&s->fifo) < 2) {
/* Defer until the scsi layer has completed */
scsi_req_continue(s->current_req);
s->data_in_ready = false;
return;
}
if (esp_get_tc(s) == 0 && fifo8_num_used(&s->fifo) < 2) {
esp_lower_drq(s);
esp_dma_done(s);
}
/* Copy device data to FIFO */
len = MIN(s->async_len, esp_get_tc(s));
len = MIN(len, fifo8_num_free(&s->fifo));
fifo8_push_all(&s->fifo, s->async_buf, len);
s->async_buf += len;
s->async_len -= len;
s->ti_size -= len;
esp_set_tc(s, esp_get_tc(s) - len);
}
}
static void esp_do_dma(ESPState *s)
{
uint32_t len, cmdlen;
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
uint8_t buf[ESP_CMDFIFO_SZ];
len = esp_get_tc(s);
if (s->do_cmd) {
/*
* handle_ti_cmd() case: esp_do_dma() is called only from
* handle_ti_cmd() with do_cmd != NULL (see the assert())
*/
cmdlen = fifo8_num_used(&s->cmdfifo);
trace_esp_do_dma(cmdlen, len);
if (s->dma_memory_read) {
len = MIN(len, fifo8_num_free(&s->cmdfifo));
s->dma_memory_read(s->dma_opaque, buf, len);
fifo8_push_all(&s->cmdfifo, buf, len);
esp_set_tc(s, esp_get_tc(s) - len);
} else {
esp_set_pdma_cb(s, DO_DMA_PDMA_CB);
esp_raise_drq(s);
return;
}
trace_esp_handle_ti_cmd(cmdlen);
s->ti_size = 0;
if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
/* No command received */
if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
return;
}
/* Command has been received */
s->do_cmd = 0;
do_cmd(s);
} else {
/*
* Extra message out bytes received: update cmdfifo_cdb_offset
* and then switch to command phase
*/
s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
esp_set_phase(s, STAT_CD);
s->rregs[ESP_RSEQ] = SEQ_CD;
s->rregs[ESP_RINTR] |= INTR_BS;
esp_raise_irq(s);
}
return;
}
if (!s->current_req) {
return;
}
if (s->async_len == 0) {
/* Defer until data is available. */
return;
}
if (len > s->async_len) {
len = s->async_len;
}
if (to_device) {
if (s->dma_memory_read) {
s->dma_memory_read(s->dma_opaque, s->async_buf, len);
esp_set_tc(s, esp_get_tc(s) - len);
s->async_buf += len;
s->async_len -= len;
s->ti_size += len;
if (s->async_len == 0) {
scsi_req_continue(s->current_req);
/*
* If there is still data to be read from the device then
* complete the DMA operation immediately. Otherwise defer
* until the scsi layer has completed.
*/
return;
}
if (esp_get_tc(s) == 0) {
/* Partially filled a scsi buffer. Complete immediately. */
esp_dma_done(s);
esp_lower_drq(s);
}
} else {
esp_set_pdma_cb(s, DO_DMA_PDMA_CB);
esp_raise_drq(s);
}
} else {
if (s->dma_memory_write) {
s->dma_memory_write(s->dma_opaque, s->async_buf, len);
esp_set_tc(s, esp_get_tc(s) - len);
s->async_buf += len;
s->async_len -= len;
s->ti_size -= len;
if (s->async_len == 0) {
scsi_req_continue(s->current_req);
return;
}
if (esp_get_tc(s) == 0) {
/* Partially filled a scsi buffer. Complete immediately. */
esp_dma_done(s);
esp_lower_drq(s);
}
} else {
/* Copy device data to FIFO */
len = MIN(len, fifo8_num_free(&s->fifo));
fifo8_push_all(&s->fifo, s->async_buf, len);
s->async_buf += len;
s->async_len -= len;
s->ti_size -= len;
esp_set_tc(s, esp_get_tc(s) - len);
esp_set_pdma_cb(s, DO_DMA_PDMA_CB);
esp_raise_drq(s);
}
}
}
static void esp_do_nodma(ESPState *s)
{
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
uint8_t buf[ESP_FIFO_SZ];
uint32_t cmdlen;
int len, n;
if (s->do_cmd) {
/* Copy FIFO into cmdfifo */
n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
n = MIN(fifo8_num_free(&s->cmdfifo), n);
fifo8_push_all(&s->cmdfifo, buf, n);
cmdlen = fifo8_num_used(&s->cmdfifo);
trace_esp_handle_ti_cmd(cmdlen);
s->ti_size = 0;
if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
/* No command received */
if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
return;
}
/* Command has been received */
s->do_cmd = 0;
do_cmd(s);
} else {
/*
* Extra message out bytes received: update cmdfifo_cdb_offset
* and then switch to command phase
*/
s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
esp_set_phase(s, STAT_CD);
s->rregs[ESP_RSEQ] = SEQ_CD;
s->rregs[ESP_RINTR] |= INTR_BS;
esp_raise_irq(s);
}
return;
}
if (!s->current_req) {
return;
}
if (s->async_len == 0) {
/* Defer until data is available. */
return;
}
if (to_device) {
len = MIN(s->async_len, ESP_FIFO_SZ);
len = MIN(len, fifo8_num_used(&s->fifo));
esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
s->async_buf += len;
s->async_len -= len;
s->ti_size += len;
} else {
if (fifo8_is_empty(&s->fifo)) {
fifo8_push(&s->fifo, s->async_buf[0]);
s->async_buf++;
s->async_len--;
s->ti_size--;
}
}
if (s->async_len == 0) {
scsi_req_continue(s->current_req);
return;
}
s->rregs[ESP_RINTR] |= INTR_BS;
esp_raise_irq(s);
}
static void esp_pdma_cb(ESPState *s)
{
switch (s->pdma_cb) {
case SATN_PDMA_CB:
satn_pdma_cb(s);
break;
case S_WITHOUT_SATN_PDMA_CB:
s_without_satn_pdma_cb(s);
break;
case SATN_STOP_PDMA_CB:
satn_stop_pdma_cb(s);
break;
case WRITE_RESPONSE_PDMA_CB:
write_response_pdma_cb(s);
break;
case DO_DMA_PDMA_CB:
do_dma_pdma_cb(s);
break;
default:
g_assert_not_reached();
}
}
void esp_command_complete(SCSIRequest *req, size_t resid)
{
ESPState *s = req->hba_private;
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
trace_esp_command_complete();
/*
* Non-DMA transfers from the target will leave the last byte in
* the FIFO so don't reset ti_size in this case
*/
if (s->dma || to_device) {
if (s->ti_size != 0) {
trace_esp_command_complete_unexpected();
}
s->ti_size = 0;
}
s->async_len = 0;
if (req->status) {
trace_esp_command_complete_fail();
}
s->status = req->status;
/*
* If the transfer is finished, switch to status phase. For non-DMA
* transfers from the target the last byte is still in the FIFO
*/
if (s->ti_size == 0) {
esp_set_phase(s, STAT_ST);
esp_dma_done(s);
esp_lower_drq(s);
}
if (s->current_req) {
scsi_req_unref(s->current_req);
s->current_req = NULL;
s->current_dev = NULL;
}
}
void esp_transfer_data(SCSIRequest *req, uint32_t len)
{
ESPState *s = req->hba_private;
int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
uint32_t dmalen = esp_get_tc(s);
assert(!s->do_cmd);
trace_esp_transfer_data(dmalen, s->ti_size);
s->async_len = len;
s->async_buf = scsi_req_get_buf(req);
if (!to_device && !s->data_in_ready) {
/*
* Initial incoming data xfer is complete so raise command
* completion interrupt
*/
s->data_in_ready = true;
s->rregs[ESP_RINTR] |= INTR_BS;
esp_raise_irq(s);
}
if (s->ti_cmd == 0) {
/*
* Always perform the initial transfer upon reception of the next TI
* command to ensure the DMA/non-DMA status of the command is correct.
* It is not possible to use s->dma directly in the section below as
* some OSs send non-DMA NOP commands after a DMA transfer. Hence if the
* async data transfer is delayed then s->dma is set incorrectly.
*/
return;
}
if (s->ti_cmd == (CMD_TI | CMD_DMA)) {
if (dmalen) {
esp_do_dma(s);
} else if (s->ti_size <= 0) {
/*
* If this was the last part of a DMA transfer then the
* completion interrupt is deferred to here.
*/
esp_dma_done(s);
esp_lower_drq(s);
}
} else if (s->ti_cmd == CMD_TI) {
esp_do_nodma(s);
}
}
static void handle_ti(ESPState *s)
{
uint32_t dmalen;
if (s->dma && !s->dma_enabled) {
s->dma_cb = handle_ti;
return;
}
s->ti_cmd = s->rregs[ESP_CMD];
if (s->dma) {
dmalen = esp_get_tc(s);
trace_esp_handle_ti(dmalen);
esp_do_dma(s);
} else {
trace_esp_handle_ti(s->ti_size);
esp_do_nodma(s);
}
}
void esp_hard_reset(ESPState *s)
{
memset(s->rregs, 0, ESP_REGS);
memset(s->wregs, 0, ESP_REGS);
s->tchi_written = 0;
s->ti_size = 0;
s->async_len = 0;
fifo8_reset(&s->fifo);
fifo8_reset(&s->cmdfifo);
s->dma = 0;
s->do_cmd = 0;
s->dma_cb = NULL;
s->rregs[ESP_CFG1] = 7;
}
static void esp_soft_reset(ESPState *s)
{
qemu_irq_lower(s->irq);
qemu_irq_lower(s->irq_data);
esp_hard_reset(s);
}
static void esp_bus_reset(ESPState *s)
{
bus_cold_reset(BUS(&s->bus));
}
static void parent_esp_reset(ESPState *s, int irq, int level)
{
if (level) {
esp_soft_reset(s);
}
}
static void esp_run_cmd(ESPState *s)
{
uint8_t cmd = s->rregs[ESP_CMD];
if (cmd & CMD_DMA) {
s->dma = 1;
/* Reload DMA counter. */
if (esp_get_stc(s) == 0) {
esp_set_tc(s, 0x10000);
} else {
esp_set_tc(s, esp_get_stc(s));
}
} else {
s->dma = 0;
}
switch (cmd & CMD_CMD) {
case CMD_NOP:
trace_esp_mem_writeb_cmd_nop(cmd);
break;
case CMD_FLUSH:
trace_esp_mem_writeb_cmd_flush(cmd);
fifo8_reset(&s->fifo);
break;
case CMD_RESET:
trace_esp_mem_writeb_cmd_reset(cmd);
esp_soft_reset(s);
break;
case CMD_BUSRESET:
trace_esp_mem_writeb_cmd_bus_reset(cmd);
esp_bus_reset(s);
if (!(s->wregs[ESP_CFG1] & CFG1_RESREPT)) {
s->rregs[ESP_RINTR] |= INTR_RST;
esp_raise_irq(s);
}
break;
case CMD_TI:
trace_esp_mem_writeb_cmd_ti(cmd);
handle_ti(s);
break;
case CMD_ICCS:
trace_esp_mem_writeb_cmd_iccs(cmd);
write_response(s);
s->rregs[ESP_RINTR] |= INTR_FC;
esp_set_phase(s, STAT_MI);
break;
case CMD_MSGACC:
trace_esp_mem_writeb_cmd_msgacc(cmd);
s->rregs[ESP_RINTR] |= INTR_DC;
s->rregs[ESP_RSEQ] = 0;
s->rregs[ESP_RFLAGS] = 0;
esp_raise_irq(s);
break;
case CMD_PAD:
trace_esp_mem_writeb_cmd_pad(cmd);
s->rregs[ESP_RSTAT] = STAT_TC;
s->rregs[ESP_RINTR] |= INTR_FC;
s->rregs[ESP_RSEQ] = 0;
break;
case CMD_SATN:
trace_esp_mem_writeb_cmd_satn(cmd);
break;
case CMD_RSTATN:
trace_esp_mem_writeb_cmd_rstatn(cmd);
break;
case CMD_SEL:
trace_esp_mem_writeb_cmd_sel(cmd);
handle_s_without_atn(s);
break;
case CMD_SELATN:
trace_esp_mem_writeb_cmd_selatn(cmd);
handle_satn(s);
break;
case CMD_SELATNS:
trace_esp_mem_writeb_cmd_selatns(cmd);
handle_satn_stop(s);
break;
case CMD_ENSEL:
trace_esp_mem_writeb_cmd_ensel(cmd);
s->rregs[ESP_RINTR] = 0;
break;
case CMD_DISSEL:
trace_esp_mem_writeb_cmd_dissel(cmd);
s->rregs[ESP_RINTR] = 0;
esp_raise_irq(s);
break;
default:
trace_esp_error_unhandled_command(cmd);
break;
}
}
uint64_t esp_reg_read(ESPState *s, uint32_t saddr)
{
uint32_t val;
switch (saddr) {
case ESP_FIFO:
if (s->dma_memory_read && s->dma_memory_write &&
(s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) {
/* Data out. */
qemu_log_mask(LOG_UNIMP, "esp: PIO data read not implemented\n");
s->rregs[ESP_FIFO] = 0;
} else {
if ((s->rregs[ESP_RSTAT] & 0x7) == STAT_DI) {
if (s->ti_size) {
esp_do_nodma(s);
} else {
/*
* The last byte of a non-DMA transfer has been read out
* of the FIFO so switch to status phase
*/
esp_set_phase(s, STAT_ST);
}
}
s->rregs[ESP_FIFO] = esp_fifo_pop(&s->fifo);
}
val = s->rregs[ESP_FIFO];
break;
case ESP_RINTR:
/*
* Clear sequence step, interrupt register and all status bits
* except TC
*/
val = s->rregs[ESP_RINTR];
s->rregs[ESP_RINTR] = 0;
s->rregs[ESP_RSTAT] &= ~STAT_TC;
esp: only set ESP_RSEQ at the start of the select sequence When processing a command to select a target and send a CDB, the ESP device maintains a sequence step register so that if an error occurs the host can determine which part of the selection/CDB submission sequence failed. The old Linux 2.6 driver is really pedantic here: it checks the sequence step register even if a command succeeds and complains loudly on the console if the sequence step register doesn't match the expected bus phase and interrupt flags. This reason this mismatch occurs is because the ESP emulation currently doesn't update the bus phase until the next TI (Transfer Information) command and so the cleared sequence step register is considered invalid for the stale bus phase. Normally this isn't an issue as the host only checks the sequence step register if an error occurs but the old Linux 2.6 driver does this in several places causing a large stream of "esp0: STEP_ASEL for tgt 0" messages to appear on the console during the boot process. Fix this by not clearing the sequence step register when reading the interrupt register and clearing the DMA status, so the guest sees a valid sequence step and bus phase combination at the end of the command phase. No other change is required since the sequence step register is correctly updated throughout the selection/CDB submission sequence once one of the select commands is issued. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Fixes: 1b9e48a5bd ("esp: implement non-DMA transfers in PDMA mode") Message-Id: <20210518212511.21688-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-19 00:25:11 +03:00
/*
* According to the datasheet ESP_RSEQ should be cleared, but as the
* emulation currently defers information transfers to the next TI
* command leave it for now so that pedantic guests such as the old
* Linux 2.6 driver see the correct flags before the next SCSI phase
* transition.
*
* s->rregs[ESP_RSEQ] = SEQ_0;
*/
esp_lower_irq(s);
break;
case ESP_TCHI:
/* Return the unique id if the value has never been written */
if (!s->tchi_written) {
val = s->chip_id;
} else {
val = s->rregs[saddr];
}
break;
case ESP_RFLAGS:
/* Bottom 5 bits indicate number of bytes in FIFO */
val = fifo8_num_used(&s->fifo);
break;
default:
val = s->rregs[saddr];
break;
}
trace_esp_mem_readb(saddr, val);
return val;
}
void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val)
{
trace_esp_mem_writeb(saddr, s->wregs[saddr], val);
switch (saddr) {
case ESP_TCHI:
s->tchi_written = true;
/* fall through */
case ESP_TCLO:
case ESP_TCMID:
s->rregs[ESP_RSTAT] &= ~STAT_TC;
break;
case ESP_FIFO:
if (s->do_cmd) {
if (!fifo8_is_full(&s->fifo)) {
esp_fifo_push(&s->fifo, val);
esp_fifo_push(&s->cmdfifo, fifo8_pop(&s->fifo));
}
/*
* If any unexpected message out/command phase data is
* transferred using non-DMA, raise the interrupt
*/
if (s->rregs[ESP_CMD] == CMD_TI) {
s->rregs[ESP_RINTR] |= INTR_BS;
esp_raise_irq(s);
}
} else {
esp_fifo_push(&s->fifo, val);
}
break;
case ESP_CMD:
s->rregs[saddr] = val;
esp_run_cmd(s);
break;
case ESP_WBUSID ... ESP_WSYNO:
break;
case ESP_CFG1:
case ESP_CFG2: case ESP_CFG3:
case ESP_RES3: case ESP_RES4:
s->rregs[saddr] = val;
break;
case ESP_WCCF ... ESP_WTEST:
break;
default:
trace_esp_error_invalid_write(val, saddr);
return;
}
s->wregs[saddr] = val;
}
static bool esp_mem_accepts(void *opaque, hwaddr addr,
unsigned size, bool is_write,
MemTxAttrs attrs)
{
return (size == 1) || (is_write && size == 4);
}
static bool esp_is_before_version_5(void *opaque, int version_id)
{
ESPState *s = ESP(opaque);
version_id = MIN(version_id, s->mig_version_id);
return version_id < 5;
}
static bool esp_is_version_5(void *opaque, int version_id)
{
ESPState *s = ESP(opaque);
version_id = MIN(version_id, s->mig_version_id);
return version_id >= 5;
}
static bool esp_is_version_6(void *opaque, int version_id)
{
ESPState *s = ESP(opaque);
version_id = MIN(version_id, s->mig_version_id);
return version_id >= 6;
}
int esp_pre_save(void *opaque)
{
ESPState *s = ESP(object_resolve_path_component(
OBJECT(opaque), "esp"));
s->mig_version_id = vmstate_esp.version_id;
return 0;
}
static int esp_post_load(void *opaque, int version_id)
{
ESPState *s = ESP(opaque);
int len, i;
version_id = MIN(version_id, s->mig_version_id);
if (version_id < 5) {
esp_set_tc(s, s->mig_dma_left);
/* Migrate ti_buf to fifo */
len = s->mig_ti_wptr - s->mig_ti_rptr;
for (i = 0; i < len; i++) {
fifo8_push(&s->fifo, s->mig_ti_buf[i]);
}
/* Migrate cmdbuf to cmdfifo */
for (i = 0; i < s->mig_cmdlen; i++) {
fifo8_push(&s->cmdfifo, s->mig_cmdbuf[i]);
}
}
s->mig_version_id = vmstate_esp.version_id;
return 0;
}
/*
* PDMA (or pseudo-DMA) is only used on the Macintosh and requires the
* guest CPU to perform the transfers between the SCSI bus and memory
* itself. This is indicated by the dma_memory_read and dma_memory_write
* functions being NULL (in contrast to the ESP PCI device) whilst
* dma_enabled is still set.
*/
static bool esp_pdma_needed(void *opaque)
{
ESPState *s = ESP(opaque);
return s->dma_memory_read == NULL && s->dma_memory_write == NULL &&
s->dma_enabled;
}
static const VMStateDescription vmstate_esp_pdma = {
.name = "esp/pdma",
.version_id = 0,
.minimum_version_id = 0,
.needed = esp_pdma_needed,
.fields = (const VMStateField[]) {
VMSTATE_UINT8(pdma_cb, ESPState),
VMSTATE_END_OF_LIST()
}
};
const VMStateDescription vmstate_esp = {
.name = "esp",
.version_id = 6,
.minimum_version_id = 3,
.post_load = esp_post_load,
.fields = (const VMStateField[]) {
VMSTATE_BUFFER(rregs, ESPState),
VMSTATE_BUFFER(wregs, ESPState),
VMSTATE_INT32(ti_size, ESPState),
VMSTATE_UINT32_TEST(mig_ti_rptr, ESPState, esp_is_before_version_5),
VMSTATE_UINT32_TEST(mig_ti_wptr, ESPState, esp_is_before_version_5),
VMSTATE_BUFFER_TEST(mig_ti_buf, ESPState, esp_is_before_version_5),
VMSTATE_UINT32(status, ESPState),
VMSTATE_UINT32_TEST(mig_deferred_status, ESPState,
esp_is_before_version_5),
VMSTATE_BOOL_TEST(mig_deferred_complete, ESPState,
esp_is_before_version_5),
VMSTATE_UINT32(dma, ESPState),
VMSTATE_STATIC_BUFFER(mig_cmdbuf, ESPState, 0,
esp_is_before_version_5, 0, 16),
VMSTATE_STATIC_BUFFER(mig_cmdbuf, ESPState, 4,
esp_is_before_version_5, 16,
sizeof(typeof_field(ESPState, mig_cmdbuf))),
VMSTATE_UINT32_TEST(mig_cmdlen, ESPState, esp_is_before_version_5),
VMSTATE_UINT32(do_cmd, ESPState),
VMSTATE_UINT32_TEST(mig_dma_left, ESPState, esp_is_before_version_5),
VMSTATE_BOOL_TEST(data_in_ready, ESPState, esp_is_version_5),
VMSTATE_UINT8_TEST(cmdfifo_cdb_offset, ESPState, esp_is_version_5),
VMSTATE_FIFO8_TEST(fifo, ESPState, esp_is_version_5),
VMSTATE_FIFO8_TEST(cmdfifo, ESPState, esp_is_version_5),
VMSTATE_UINT8_TEST(ti_cmd, ESPState, esp_is_version_5),
VMSTATE_UINT8_TEST(lun, ESPState, esp_is_version_6),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * const []) {
&vmstate_esp_pdma,
NULL
}
};
static void sysbus_esp_mem_write(void *opaque, hwaddr addr,
uint64_t val, unsigned int size)
{
SysBusESPState *sysbus = opaque;
ESPState *s = ESP(&sysbus->esp);
uint32_t saddr;
saddr = addr >> sysbus->it_shift;
esp_reg_write(s, saddr, val);
}
static uint64_t sysbus_esp_mem_read(void *opaque, hwaddr addr,
unsigned int size)
{
SysBusESPState *sysbus = opaque;
ESPState *s = ESP(&sysbus->esp);
uint32_t saddr;
saddr = addr >> sysbus->it_shift;
return esp_reg_read(s, saddr);
}
static const MemoryRegionOps sysbus_esp_mem_ops = {
.read = sysbus_esp_mem_read,
.write = sysbus_esp_mem_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid.accepts = esp_mem_accepts,
};
static void sysbus_esp_pdma_write(void *opaque, hwaddr addr,
uint64_t val, unsigned int size)
{
SysBusESPState *sysbus = opaque;
ESPState *s = ESP(&sysbus->esp);
trace_esp_pdma_write(size);
switch (size) {
case 1:
esp_pdma_write(s, val);
break;
case 2:
esp_pdma_write(s, val >> 8);
esp_pdma_write(s, val);
break;
}
esp_pdma_cb(s);
}
static uint64_t sysbus_esp_pdma_read(void *opaque, hwaddr addr,
unsigned int size)
{
SysBusESPState *sysbus = opaque;
ESPState *s = ESP(&sysbus->esp);
uint64_t val = 0;
trace_esp_pdma_read(size);
switch (size) {
case 1:
val = esp_pdma_read(s);
break;
case 2:
val = esp_pdma_read(s);
val = (val << 8) | esp_pdma_read(s);
break;
}
esp_pdma_cb(s);
return val;
}
static void *esp_load_request(QEMUFile *f, SCSIRequest *req)
{
ESPState *s = container_of(req->bus, ESPState, bus);
scsi_req_ref(req);
s->current_req = req;
return s;
}
static const MemoryRegionOps sysbus_esp_pdma_ops = {
.read = sysbus_esp_pdma_read,
.write = sysbus_esp_pdma_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
.impl.min_access_size = 1,
.impl.max_access_size = 2,
};
static const struct SCSIBusInfo esp_scsi_info = {
.tcq = false,
.max_target = ESP_MAX_DEVS,
.max_lun = 7,
.load_request = esp_load_request,
.transfer_data = esp_transfer_data,
.complete = esp_command_complete,
.cancel = esp_request_cancelled
};
static void sysbus_esp_gpio_demux(void *opaque, int irq, int level)
{
SysBusESPState *sysbus = SYSBUS_ESP(opaque);
ESPState *s = ESP(&sysbus->esp);
switch (irq) {
case 0:
parent_esp_reset(s, irq, level);
break;
case 1:
esp_dma_enable(s, irq, level);
break;
}
}
static void sysbus_esp_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
SysBusESPState *sysbus = SYSBUS_ESP(dev);
ESPState *s = ESP(&sysbus->esp);
if (!qdev_realize(DEVICE(s), NULL, errp)) {
return;
}
sysbus_init_irq(sbd, &s->irq);
sysbus_init_irq(sbd, &s->irq_data);
assert(sysbus->it_shift != -1);
s->chip_id = TCHI_FAS100A;
memory_region_init_io(&sysbus->iomem, OBJECT(sysbus), &sysbus_esp_mem_ops,
sysbus, "esp-regs", ESP_REGS << sysbus->it_shift);
sysbus_init_mmio(sbd, &sysbus->iomem);
memory_region_init_io(&sysbus->pdma, OBJECT(sysbus), &sysbus_esp_pdma_ops,
sysbus, "esp-pdma", 4);
sysbus_init_mmio(sbd, &sysbus->pdma);
qdev_init_gpio_in(dev, sysbus_esp_gpio_demux, 2);
scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named() The function scsi_bus_new() creates a new SCSI bus; callers can either pass in a name argument to specify the name of the new bus, or they can pass in NULL to allow the bus to be given an automatically generated unique name. Almost all callers want to use the autogenerated name; the only exception is the virtio-scsi device. Taking a name argument that should almost always be NULL is an easy-to-misuse API design -- it encourages callers to think perhaps they should pass in some standard name like "scsi" or "scsi-bus". We don't do this anywhere for SCSI, but we do (incorrectly) do it for other bus types such as i2c. The function name also implies that it will return a newly allocated object, when it in fact does in-place allocation. We more commonly name such functions foo_init(), with foo_new() being the allocate-and-return variant. Replace all the scsi_bus_new() callsites with either: * scsi_bus_init() for the usual case where the caller wants an autogenerated bus name * scsi_bus_init_named() for the rare case where the caller needs to specify the bus name and document that for the _named() version it's then the caller's responsibility to think about uniqueness of bus names. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210923121153.23754-2-peter.maydell@linaro.org
2021-09-23 15:11:48 +03:00
scsi_bus_init(&s->bus, sizeof(s->bus), dev, &esp_scsi_info);
}
static void sysbus_esp_hard_reset(DeviceState *dev)
{
SysBusESPState *sysbus = SYSBUS_ESP(dev);
ESPState *s = ESP(&sysbus->esp);
esp_hard_reset(s);
}
static void sysbus_esp_init(Object *obj)
{
SysBusESPState *sysbus = SYSBUS_ESP(obj);
object_initialize_child(obj, "esp", &sysbus->esp, TYPE_ESP);
}
static const VMStateDescription vmstate_sysbus_esp_scsi = {
.name = "sysbusespscsi",
.version_id = 2,
scsi: esp: Defer command completion until previous interrupts have been handled The guest OS reads RSTAT, RSEQ, and RINTR, and expects those registers to reflect a consistent state. However, it is possible that the registers can change after RSTAT was read, but before RINTR is read, when esp_command_complete() is called. Guest OS qemu -------- ---- [handle interrupt] Read RSTAT esp_command_complete() RSTAT = STAT_ST esp_dma_done() RSTAT |= STAT_TC RSEQ = 0 RINTR = INTR_BS Read RSEQ Read RINTR RINTR = 0 RSTAT &= ~STAT_TC RSEQ = SEQ_CD The guest OS would then try to handle INTR_BS combined with an old value of RSTAT. This sometimes resulted in lost events, spurious interrupts, guest OS confusion, and stalled SCSI operations. A typical guest error log (observed with various versions of Linux) looks as follows. scsi host1: Spurious irq, sreg=13. ... scsi host1: Aborting command [84531f10:2a] scsi host1: Current command [f882eea8:35] scsi host1: Queued command [84531f10:2a] scsi host1: Active command [f882eea8:35] scsi host1: Dumping command log scsi host1: ent[15] CMD val[44] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[00] event[0c] scsi host1: ent[16] CMD val[01] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c] scsi host1: ent[17] CMD val[43] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c] scsi host1: ent[18] EVENT val[0d] sreg[92] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c] ... Defer handling command completion until previous interrupts have been handled to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-29 20:17:42 +03:00
.minimum_version_id = 1,
.pre_save = esp_pre_save,
.fields = (const VMStateField[]) {
VMSTATE_UINT8_V(esp.mig_version_id, SysBusESPState, 2),
VMSTATE_STRUCT(esp, SysBusESPState, 0, vmstate_esp, ESPState),
VMSTATE_END_OF_LIST()
}
};
static void sysbus_esp_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = sysbus_esp_realize;
dc->reset = sysbus_esp_hard_reset;
dc->vmsd = &vmstate_sysbus_esp_scsi;
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
}
static const TypeInfo sysbus_esp_info = {
.name = TYPE_SYSBUS_ESP,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_init = sysbus_esp_init,
.instance_size = sizeof(SysBusESPState),
.class_init = sysbus_esp_class_init,
};
static void esp_finalize(Object *obj)
{
ESPState *s = ESP(obj);
fifo8_destroy(&s->fifo);
fifo8_destroy(&s->cmdfifo);
}
static void esp_init(Object *obj)
{
ESPState *s = ESP(obj);
fifo8_create(&s->fifo, ESP_FIFO_SZ);
fifo8_create(&s->cmdfifo, ESP_CMDFIFO_SZ);
}
static void esp_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
/* internal device for sysbusesp/pciespscsi, not user-creatable */
dc->user_creatable = false;
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
}
static const TypeInfo esp_info = {
.name = TYPE_ESP,
.parent = TYPE_DEVICE,
.instance_init = esp_init,
.instance_finalize = esp_finalize,
.instance_size = sizeof(ESPState),
.class_init = esp_class_init,
};
static void esp_register_types(void)
{
type_register_static(&sysbus_esp_info);
type_register_static(&esp_info);
}
type_init(esp_register_types)