mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0f2dd05b9f
qemu/include/hw/arm/npcm7xx.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

138 lines
4.5 KiB
C
Raw Normal View History

hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
/*
* Nuvoton NPCM7xx SoC family.
*
* Copyright 2020 Google LLC
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#ifndef NPCM7XX_H
#define NPCM7XX_H
#include "hw/boards.h"
hw/adc: Add an ADC module for NPCM7XX The ADC is part of NPCM7XX Module. Its behavior is controled by the ADC_CON register. It converts one of the eight analog inputs into a digital input and stores it in the ADC_DATA register when enabled. Users can alter input value by using qom-set QMP command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-4-wuhaotsh@google.com [PMM: Added missing hw/adc/trace.h file] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08 22:09:42 +03:00
#include "hw/adc/npcm7xx_adc.h"
hw/arm: Connect PWM fans in NPCM7XX boards This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan splitter corresponds to 1 PWM output and can connect to multiple fan inputs (MFT devices). In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes these splitters and connect them to their corresponding modules according their specific device trees. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11 21:08:54 +03:00
#include "hw/core/split-irq.h"
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
#include "hw/cpu/a9mpcore.h"
hw/gpio: Add GPIO model for Nuvoton NPCM7xx The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-24 00:06:37 +03:00
#include "hw/gpio/npcm7xx_gpio.h"
hw/i2c: Implement NPCM7XX SMBus Module Single Mode This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-11 01:04:22 +03:00
#include "hw/i2c/npcm7xx_smbus.h"
hw/mem: Stubbed out NPCM7xx Memory Controller model This just implements the bare minimum to cause the boot block to skip memory initialization. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-10-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:56 +03:00
#include "hw/mem/npcm7xx_mc.h"
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
#include "hw/misc/npcm7xx_clk.h"
#include "hw/misc/npcm7xx_gcr.h"
hw/arm: Add MFT device to NPCM7xx Soc This patch adds the recently implemented MFT device to the NPCM7XX SoC file. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11 21:08:53 +03:00
#include "hw/misc/npcm7xx_mft.h"
hw/misc: Add a PWM module for NPCM7XX The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08 22:09:43 +03:00
#include "hw/misc/npcm7xx_pwm.h"
hw/misc: Add npcm7xx random number generator The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-24 00:06:35 +03:00
#include "hw/misc/npcm7xx_rng.h"
hw/arm: Add npcm7xx emc model This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210218212453.831406-3-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-19 00:24:52 +03:00
#include "hw/net/npcm7xx_emc.h"
hw/nvram: NPCM7xx OTP device model This supports reading and writing OTP fuses and keys. Only fuse reading has been tested. Protection is not implemented. Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-9-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:55 +03:00
#include "hw/nvram/npcm7xx_otp.h"
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
#include "hw/timer/npcm7xx_timer.h"
hw/ssi: NPCM7xx Flash Interface Unit device model This implements a device model for the NPCM7xx SPI flash controller. Direct reads and writes, and user-mode transactions have been tested in various modes. Protection features are not implemented yet. All the FIU instances are available in the SoC's address space, regardless of whether or not they're connected to actual flash chips. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-11-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:57 +03:00
#include "hw/ssi/npcm7xx_fiu.h"
hw/arm: Attach PSPI module to NPCM7XX SoC Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-09 02:54:33 +03:00
#include "hw/ssi/npcm_pspi.h"
hw/arm/npcm7xx: Add EHCI and OHCI controllers The NPCM730 and NPCM750 chips have a single USB host port shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This adds support for both of them. Testing notes: * With -device usb-kbd, qemu will automatically insert a full-speed hub, and the keyboard becomes controlled by the OHCI controller. * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly attached to the port without any hubs, and the device becomes controlled by the EHCI controller since it's high speed capable. * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the keyboard is directly attached to the port, but it only advertises itself as full-speed capable, so it becomes controlled by the OHCI controller. In all cases, the keyboard device enumerates correctly. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-24 00:06:36 +03:00
#include "hw/usb/hcd-ehci.h"
#include "hw/usb/hcd-ohci.h"
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
#include "target/arm/cpu.h"
hw/arm: Add Nuvoton SD module to board Signed-off-by: Shengtan Mao <stmao@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20211008002628.1958285-3-wuhaotsh@google.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-08 03:26:25 +03:00
#include "hw/sd/npcm7xx_sdhci.h"
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
#define NPCM7XX_MAX_NUM_CPUS (2)
/* The first half of the address space is reserved for DDR4 DRAM. */
#define NPCM7XX_DRAM_BA (0x00000000)
#define NPCM7XX_DRAM_SZ (2 * GiB)
/* Magic addresses for setting up direct kernel booting and SMP boot stubs. */
#define NPCM7XX_LOADER_START (0x00000000) /* Start of SDRAM */
#define NPCM7XX_SMP_LOADER_START (0xffff0000) /* Boot ROM */
#define NPCM7XX_SMP_BOOTREG_ADDR (0xf080013c) /* GCR.SCRPAD */
#define NPCM7XX_GIC_CPU_IF_ADDR (0xf03fe100) /* GIC within A9 */
hw/arm/npcm7xx: add board setup stub for CPU and UART clocks When booting directly into a kernel, bypassing the boot loader, the CPU and UART clocks are not set up correctly. This makes the system appear very slow, and causes the initrd boot test to fail when optimization is off. The UART clock must run at 24 MHz. The default 25 MHz reference clock cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works perfectly with the default /20 divider. The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs at 800 MHz by default, so we need to double the feedback divider as well to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz). We don't bother checking for PLL lock because we know our emulated PLLs lock instantly. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-13-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:59 +03:00
#define NPCM7XX_BOARD_SETUP_ADDR (0xffff1000) /* Boot ROM */
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
hw/arm: Connect PWM fans in NPCM7XX boards This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan splitter corresponds to 1 PWM output and can connect to multiple fan inputs (MFT devices). In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes these splitters and connect them to their corresponding modules according their specific device trees. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11 21:08:54 +03:00
#define NPCM7XX_NR_PWM_MODULES 2
hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-09 17:03:02 +03:00
struct NPCM7xxMachine {
hw/arm: Add two NPCM7xx-based machines This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:52 +03:00
MachineState parent;
hw/arm: Connect PWM fans in NPCM7XX boards This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan splitter corresponds to 1 PWM output and can connect to multiple fan inputs (MFT devices). In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes these splitters and connect them to their corresponding modules according their specific device trees. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11 21:08:54 +03:00
/*
* PWM fan splitter. each splitter connects to one PWM output and
* multiple MFT inputs.
*/
SplitIRQ fan_splitter[NPCM7XX_NR_PWM_MODULES *
NPCM7XX_PWM_PER_MODULE];
hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-09 17:03:02 +03:00
};
hw/arm: Add two NPCM7xx-based machines This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:52 +03:00
#define TYPE_NPCM7XX_MACHINE MACHINE_TYPE_NAME("npcm7xx")
hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-09 17:03:02 +03:00
OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMachine, NPCM7XX_MACHINE)
hw/arm: Add two NPCM7xx-based machines This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:52 +03:00
typedef struct NPCM7xxMachineClass {
MachineClass parent;
const char *soc_type;
} NPCM7xxMachineClass;
#define NPCM7XX_MACHINE_CLASS(klass) \
OBJECT_CLASS_CHECK(NPCM7xxMachineClass, (klass), TYPE_NPCM7XX_MACHINE)
#define NPCM7XX_MACHINE_GET_CLASS(obj) \
OBJECT_GET_CLASS(NPCM7xxMachineClass, (obj), TYPE_NPCM7XX_MACHINE)
hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-09 17:03:02 +03:00
struct NPCM7xxState {
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
DeviceState parent;
ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS];
A9MPPrivState a9mpcore;
MemoryRegion sram;
MemoryRegion irom;
MemoryRegion ram3;
MemoryRegion *dram;
NPCM7xxGCRState gcr;
NPCM7xxCLKState clk;
NPCM7xxTimerCtrlState tim[3];
hw/adc: Add an ADC module for NPCM7XX The ADC is part of NPCM7XX Module. Its behavior is controled by the ADC_CON register. It converts one of the eight analog inputs into a digital input and stores it in the ADC_DATA register when enabled. Users can alter input value by using qom-set QMP command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-4-wuhaotsh@google.com [PMM: Added missing hw/adc/trace.h file] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08 22:09:42 +03:00
NPCM7xxADCState adc;
hw/arm: Connect PWM fans in NPCM7XX boards This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan splitter corresponds to 1 PWM output and can connect to multiple fan inputs (MFT devices). In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes these splitters and connect them to their corresponding modules according their specific device trees. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11 21:08:54 +03:00
NPCM7xxPWMState pwm[NPCM7XX_NR_PWM_MODULES];
hw/arm: Add MFT device to NPCM7xx Soc This patch adds the recently implemented MFT device to the NPCM7XX SoC file. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11 21:08:53 +03:00
NPCM7xxMFTState mft[8];
hw/nvram: NPCM7xx OTP device model This supports reading and writing OTP fuses and keys. Only fuse reading has been tested. Protection is not implemented. Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-9-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:55 +03:00
NPCM7xxOTPState key_storage;
NPCM7xxOTPState fuse_array;
hw/mem: Stubbed out NPCM7xx Memory Controller model This just implements the bare minimum to cause the boot block to skip memory initialization. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-10-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:56 +03:00
NPCM7xxMCState mc;
hw/misc: Add npcm7xx random number generator The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-24 00:06:35 +03:00
NPCM7xxRNGState rng;
hw/gpio: Add GPIO model for Nuvoton NPCM7xx The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-24 00:06:37 +03:00
NPCM7xxGPIOState gpio[8];
hw/i2c: Implement NPCM7XX SMBus Module Single Mode This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-11 01:04:22 +03:00
NPCM7xxSMBusState smbus[16];
hw/arm/npcm7xx: Add EHCI and OHCI controllers The NPCM730 and NPCM750 chips have a single USB host port shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This adds support for both of them. Testing notes: * With -device usb-kbd, qemu will automatically insert a full-speed hub, and the keyboard becomes controlled by the OHCI controller. * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly attached to the port without any hubs, and the device becomes controlled by the EHCI controller since it's high speed capable. * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the keyboard is directly attached to the port, but it only advertises itself as full-speed capable, so it becomes controlled by the OHCI controller. In all cases, the keyboard device enumerates correctly. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-24 00:06:36 +03:00
EHCISysBusState ehci;
OHCISysBusState ohci;
hw/ssi: NPCM7xx Flash Interface Unit device model This implements a device model for the NPCM7xx SPI flash controller. Direct reads and writes, and user-mode transactions have been tested in various modes. Protection features are not implemented yet. All the FIU instances are available in the SoC's address space, regardless of whether or not they're connected to actual flash chips. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-11-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:57 +03:00
NPCM7xxFIUState fiu[2];
hw/arm: Add npcm7xx emc model This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210218212453.831406-3-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-19 00:24:52 +03:00
NPCM7xxEMCState emc[2];
hw/arm: Add Nuvoton SD module to board Signed-off-by: Shengtan Mao <stmao@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20211008002628.1958285-3-wuhaotsh@google.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-08 03:26:25 +03:00
NPCM7xxSDHCIState mmc;
hw/arm: Attach PSPI module to NPCM7XX SoC Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-09 02:54:33 +03:00
NPCMPSPIState pspi[2];
hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-09 17:03:02 +03:00
};
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
#define TYPE_NPCM7XX "npcm7xx"
hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-09 17:03:02 +03:00
OBJECT_DECLARE_TYPE(NPCM7xxState, NPCM7xxClass, NPCM7XX)
hw/arm: Add NPCM730 and NPCM750 SoC models The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11 08:20:51 +03:00
#define TYPE_NPCM730 "npcm730"
#define TYPE_NPCM750 "npcm750"
typedef struct NPCM7xxClass {
DeviceClass parent;
/* Bitmask of modules that are permanently disabled on this chip. */
uint32_t disabled_modules;
/* Number of CPU cores enabled in this SoC class (may be 1 or 2). */
uint32_t num_cpus;
} NPCM7xxClass;
/**
* npcm7xx_load_kernel - Loads memory with everything needed to boot
* @machine - The machine containing the SoC to be booted.
* @soc - The SoC containing the CPU to be booted.
*
* This will set up the ARM boot info structure for the specific NPCM7xx
* derivative and call arm_load_kernel() to set up loading of the kernel, etc.
* into memory, if requested by the user.
*/
void npcm7xx_load_kernel(MachineState *machine, NPCM7xxState *soc);
#endif /* NPCM7XX_H */
Reference in New Issue Copy Permalink