Hash join tuples reuse the HOT status bit to indicate match status
during hash join execution. Correct reuse requires clearing the bit in
all tuples. Serial hash join and parallel multi-batch hash join do so
upon inserting the tuple into the hashtable. Single batch parallel hash
join and batch 0 of unexpected multi-batch hash joins forgot to do this.
It hadn't come up before because hashtable tuple match bits are only
used for right and full outer joins and parallel ROJ and FOJ were
unsupported. 11c2d6fdf5 introduced support for parallel ROJ/FOJ but
neglected to ensure the match bits were reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/flat/CAMbWs48Nde1Mv%3DBJv6_vXmRKHMuHZm2Q_g4F6Z3_pn%2B3EV6BGQ%40mail.gmail.com
bea3d7e has redesigned the regexp engine so as all the allocations go
through palloc() with a dedicated memory context. hba.c had to cope
with the past memory management logic by going through all the HBA and
ident lines generated, then directly free all the regexps found in
AuthTokens to ensure that no leaks would happen. Such leaks could
happen for example in the postmaster after a SIGHUP, in the event of
an HBA and/or ident reload failure where all the new content parsed must
be discarded, including all the regexps that may have been compiled.
Now that regexps are palloc()'d in their own memory context,
MemoryContextDelete() is enough to ensure that all the compiled regexps
are properly gone. Simplifying this logic in hba.c has the effect to
only remove code. Most of it is new in v16, except the part for regexps
compiled in ident entries for the system username, so doing this cleanup
now rather than when v17 opens for business will reduce future diffs
with the upcoming REL_16_STABLE.
Some comments were incorrect since bea3d7e, now fixed to reflect the
reality.
Reviewed-by: Bertrand Drouvot, Álvaro Herrera
Discussion: https://postgr.es/m/ZDdJ289Ky2qEj4h+@paquier.xyz
This GUC was renamed to debug_parallel_query in 5352ca22e. That commit
added an entry into map_old_guc_names[] to allow the old name still to
work. That was done to allow a transition time where the buildfarm
configs could be swapped over to use debug_parallel_query instead. That
work is now complete.
Here we remove the old name with the intention of breaking any user code
which is using force_parallel_query. As mentioned in the commit message
for 5352ca22e, it appeared many users were misled into thinking that
setting this GUC was doing something useful for them to make queries run
more quickly.
Discussion: https://postgr.es/m/CAApHDvoR7EOz7Tvyzrd18FO-Dw2Cp4Uyq25TEWguK+XyCJtzOw@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced relatively recently, after the code
base had parameter name mismatches fixed in bulk (see commits starting
with commits 4274dc22 and 035ce1fe).
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
Like all earlier commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
In the HTML output, this decorates section headers and variable list
terms with a marker ("#") that is a link to the same section/term.
That way, links inside a page can be discovered for easier sharing.
The marker only appears when hovering.
This now requires that all elements that are candidates for such a
link have an id attribute. Otherwise, an error will be generated.
All previously missing ids have been added prior to this patch.
Author: Brar Piening <brar@gmx.de>
Reviewed-by: Karl O. Pinc <kop@karlpinc.com>
Discussion: https://www.postgresql.org/message-id/flat/CAB8KJ=jpuQU9QJe4+RgWENrK5g9jhoysMw2nvTN_esoOU0=a_w@mail.gmail.com
The test previously had a list of OSes that direct I/O was expected to
work on. That worked well enough for the systems in our build farm, but
didn't survive contact with the Debian build bots running on tmpfs via
overlayfs. tmpfs does not support O_DIRECT, but we don't want to
exclude Linux generally.
The new approach is to try to create an empty file with O_DIRECT from
Perl first. If that fails, we'll skip the test and report what the
error was.
Reported-by: Christoph Berg <myon@debian.org>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/ZDYd4A78cT2ULxZZ%40msg.df7cb.de
We can't assert that we're the only process attached to a barrier after
BarrierArriveAndDetachExceptLast(). Although that'll be true almost
always, a late-starting parallel worker can attach very briefly (that
is, immediately detach after checking the phase) right at that moment.
BarrierArriveAndDetachExceptLast() already contains an assertion like
that, but it holds a spinlock preventing the race. This thinko caused a
one-off failure on build farm animal chimaera.
Diagnosed-by: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3590249.1680971629@sss.pgh.pa.us
This reverts commit e056c557aef4 and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
Our policy since commit ab77a5a45 has been that a plan node having
any initplans is automatically not parallel-safe. (This could be
relaxed, but not today.) clean_up_removed_plan_level neglected
this, and could attach initplans to a parallel-safe child plan
node without clearing the plan's parallel-safe flag. That could
lead to "subplan was not initialized" errors at runtime, in case
an initplan referenced another one and only the referencing one
got transmitted to parallel workers.
The fix in clean_up_removed_plan_level is trivial enough.
materialize_finished_plan also moves initplans from one node
to another, but it's okay because it already copies the source
node's parallel_safe flag. The other place that does this kind
of thing is standard_planner's hack to inject a top-level Gather
when debug_parallel_query is active. But that's actually dead
code given that we're correctly enforcing the "initplans aren't
parallel safe" rule, so just replace it with an Assert that
there are no initplans.
Also improve some related comments.
Normally we'd add a regression test case for this sort of bug.
The mistake itself is already reached by existing tests, but there
is accidentally no visible problem. The only known test case that
creates an actual failure seems too indirect and fragile to justify
keeping it as a regression test (not least because it fails to fail
in v11, though the bug is clearly present there too).
Per report from Justin Pryzby. Back-patch to all supported branches.
Discussion: https://postgr.es/m/ZDVt6MaNWkRDO1LQ@telsasoft.com
The previous wording used MVF to indicate the Most Common Values'
Frequencies, but the abbreviation was never explained or defined.
Reword to mcv_freqs to make the use clearer.
Also add MCF and MCV as acronyms as they were using <acronym>
markup but were missing from the acronyms page.
Reported-by: Eric Mutta <eric.mutta@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/166112292492.654.5377188452604176150@wrigleys.postgresql.org
Calling fseek() or ftello() on a handle to a non-seeking device such as
a pipe or a communications device is not supported. Unfortunately,
MSVC's flavor of these routines, _fseeki64() and _ftelli64(), do not
return an error when given a pipe as handle. Some of the logic of
pg_dump and restore relies on these routines to check if a handle is
seekable, causing failures when passing the contents of pg_dump to
pg_restore through a pipe, for example.
This commit introduces wrappers for fseeko() and ftello() on MSVC so as
any callers are able to properly detect the cases of non-seekable
handles. This relies mainly on GetFileType(), sharing a bit of code
with the MSVC port for fstat(). The code in charge of getting a file
type is refactored into a new file called win32common.c, shared by
win32stat.c and the new win32fseek.c. It includes the MSVC ports for
fseeko() and ftello().
Like 765f5df, this is backpatched down to 14, where the fstat()
implementation for MSVC is able to understand about files larger than
4GB in size. Using a TAP test for that is proving to be tricky as
IPC::Run handles the pipes by itself, still I have been able to check
the fix manually.
Reported-by: Daniel Watzinger
Author: Juan José Santamaría Flecha, Michael Paquier
Discussion: https://postgr.es/m/CAC+AXB26a4EmxM2suXxPpJaGrqAdxracd7hskLg-zxtPB50h7A@mail.gmail.com
Backpatch-through: 14
Clarify the goals of the recently added guidelines for rmgrdesc authors:
to avoid gratuitous inconsistencies across resource managers, and to
make it reasonably easy to write a reusable custom parser.
Beyond that, the guidelines leave rmgrdesc authors with a significant
amount of leeway. This even includes the leeway to invent custom
conventions (in cases where it's warranted).
Follow-up to commit 7d8219a4.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkbYuvwYKm-Y-72QEh6SPMQcAo9uONv+mR3bMGcu9E_Cg@mail.gmail.com
Make heap desc routines that output status bit as arrays of constants
avoid outputting array literals that contain superfluous punctuation
characters that complicate parsing the output. Also make sure that no
heap desc routine repeats the same key name (at the same nesting level),
for the same reason. Arguably, these were both oversights in commit
7d8219a4.
In passing, make the desc output code (which covers Heap's DELETE,
UPDATE, HOT_UPDATE, LOCK, and LOCK_UPDATED record types) consistent in
terms of the output order of each field. This order also matches WAL
record struct order. Heap's DELETE desc output now shows the record's
xmax field for the first time (just like UPDATE/HOT_UPDATE records).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=pNYtxiJ2Jx5Lj=fKo1OEZ4GE0p_kct+ugAUTqBwU46g@mail.gmail.com
Make xl_heap_lock's infobits_set field of type uint8, not int8. Using
int8 isn't appropriate given that the field just holds status bits.
This fixes an oversight in commit 0ac5ad5134.
In passing rename the nearby TransactionId field to "xmax" to make
things consistency with related records, such as xl_heap_lock_updated.
Deliberately avoid a bump in XLOG_PAGE_MAGIC. No backpatch, either.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkCd3kOS8b7Rfxw7Mh1_6jvX=Nzo-CWR1VBTiOtVZkWHA@mail.gmail.com
At least one slow buildfarm system (hoverfly) showed that the database
creation was not replicated before we try to create logical replication slots
on the standby, in that database.
Reported-by: Noah Misch <noah@leadboat.com>
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/20230411053657.GA1177147@rfd.leadboat.com
There's no need to check if opt->arg is NULL since defGetString() already
does that and raises an ERROR if it is. Let's just remove that check.
Also, combine the two remaining ERRORs into a single check. It seems
better to give an indication about what sort of values we're looking for
rather than just to state that the value given isn't valid. Make
BUFFER_USAGE_LIMIT uppercase in this ERROR message too. It's already
upper case in one other error message, so make that consistent.
Reported-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230411.102335.1643720544536884844.horikyota.ntt@gmail.com
The tables in "71.3. Extensibility" listing the support functions
for bloom and minmax-multi opclasses should include the associated
options function. While this isn't quite as required as the rest,
you need it for full functionality of the opclass.
Back-patch to v14 where these functions were added.
We cannot use the generic array_desc approach with per-tuple nbtree
posting list update metadata because array_desc can only deal with fixed
width elements (e.g., page offset numbers). Using array_desc led to
incorrect rmgr descriptions for updates from nbtree DELETE/VACUUM WAL
records.
To fix, add specialized code to describe the update metadata as array
elements in desc output. We now iterate over the update metadata using
an approach that matches related REDO routines.
Also stop showing the updates offset number array separately in nbtree
DELETE/VACUUM desc output. It's redundant information, since the same
page offset numbers appear in the description of each individual update
element. Also make some small tweaks to the way that we format arrays
in all desc routines (not just nbtree desc routines) to make arrays a
little less verbose.
Oversight in commit 1c453cfd, which enhanced the nbtree rmgr desc
routines.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkbYuvwYKm-Y-72QEh6SPMQcAo9uONv+mR3bMGcu9E_Cg@mail.gmail.com
EXTRACT(EPOCH), EXTRACT(SECOND), and some related cases print more
trailing zeroes than they used to. This behavior change happened
with commit a2da77cdb (Change return type of EXTRACT to numeric),
and it was intentional according to the commit log:
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
It's been like that for two releases now, so while I suggested
changing this back, it's probably better to adjust the documentation
examples.
Per bug #17866 from Евгений Жужнев. Back-patch to v14 where the
change came in.
Discussion: https://postgr.es/m/17866-18eb70095b1594e2@postgresql.org
Checking for the required versions of IO::Pty as well as IPC::Run
can be achieved with a single eval call, and by using the VERSION
function the comparison is guaranteed to follow the same rules as
calling 'use' on the module with a version.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/6d880ea2-f8ca-f458-4dcd-a7a3e6d6cd7c@dunslane.net
The new direct I/O test deliberately uses a very small shared_buffers to
force some disk transfers without making the data set large and slow,
but ran into a problem with wal_level = minimal: log_newpage_range()
pins many buffers, leading to a few intermittent "no unpinned buffers
available" errors.
We could presumably fix that by adjusting shared_buffers, but crake
seems to be trying to tell us something interesting with these settings,
so let's just avoid wal_level = minimal in this test for now.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230408060408.n7xdwk3mxj5oykt6%40awork3.anarazel.de
If a variable has an initialization expression that wraps onto the
next line(s), pg_bsd_indent will now indent the continuation lines
one stop, instead of aligning them flush with the variable declaration.
We've been holding off applying this until the last v16 CF finished,
but now it's time.
Thomas Munro and Tom Lane
Discussion: https://postgr.es/m/20230120013137.7ky7nl4e4zjorrfa@awork3.anarazel.de
Our convention for some time has been that successful tests shouldn't
print anything on stderr. A stray "diag" call violated that, and
for that matter messed up the normal TAP progress display.
IPC::Run versions prior to 0.98 cause the interactive session to time out,
so SKIP the test in case these versions are detected (they are within the
base requirement for our TAP tests in general). Error reported by the BF
and investigation by Tom Lane.
Discussion: https://postgr.es/m/414A86BD-986B-48A7-A1E4-EEBCE5AF08CB@yesql.se
This reverts commit 3d4fa227bce4294ce1cc214b4a9d3b7caa3f0454.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Previously, a PostgreSQL-specific callback checked by the regex engine
had a way to trigger a special error code REG_CANCEL if it detected that
the next call to CHECK_FOR_INTERRUPTS() would certainly throw via
ereport().
A later proposed bugfix aims to move some complex logic out of signal
handlers, so that it won't run until the next CHECK_FOR_INTERRUPTS(),
which makes the above design impossible unless we split
CHECK_FOR_INTERRUPTS() into two phases, one to run logic and another to
ereport(). We may develop such a system in the future, but for the
regex code it is no longer necessary.
An earlier commit moved regex memory management over to our
MemoryContext system. Given that the purpose of the two-phase interrupt
checking was to free memory before throwing, something we don't need to
worry about anymore, it seems simpler to inject CHECK_FOR_INTERRUPTS()
directly into cancelation points, and just let it throw.
Since the plan is to keep PostgreSQL-specific concerns separate from the
main regex engine code (with a view to bein able to stay in sync with
other projects), do this with a new macro INTERRUPT(), customizable in
regcustom.h and defaulting to nothing.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Now that our regex engine uses palloc(), it's not necessary to set up a
special memory context callback to free compiled regexes. The regex has
no resources other than the memory that is already going to be freed in
bulk.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Previously, regex_t objects' memory was managed with malloc() and free()
directly. Switch to palloc()-based memory management instead.
Advantages:
* memory used by cached regexes is now visible with MemoryContext
observability tools
* cleanup can be done automatically in certain failure modes
(something that later commits will take advantage of)
* cleanup can be done in bulk
On the downside, there may be more fragmentation (wasted memory) due to
per-regex MemoryContext objects. This is a problem shared with other
cached objects in PostgreSQL and can probably be improved with later
tuning.
Thanks to Noah Misch for suggesting this general approach, which
unblocks later work on interrupts.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Unsurprisingly, this requires wal_level = logical to be set on the primary and
standby. The infrastructure added in 26669757b6a ensures that slots are
invalidated if the primary's wal_level is lowered.
Creating a slot on a standby waits for a xl_running_xact record to be
processed. If the primary is idle (and thus not emitting xl_running_xact
records), that can take a while. To make that faster, this commit also
introduces the pg_log_standby_snapshot() function. By executing it on the
primary, completion of slot creation on the standby can be accelerated.
Note that logical decoding on a standby does not itself enforce that required
catalog rows are not removed. The user has to use physical replication slots +
hot_standby_feedback or other measures to prevent that. If catalog rows
required for a slot are removed, the slot is invalidated.
See 6af1793954e for an overall design of logical decoding on a standby.
Bumps catversion, for the addition of the pg_log_standby_snapshot() function.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de> (in an older version)
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: FabrÌzio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
