Ensure that CREATE DATABASE and related commands are issued when, and
only when, --create is specified. Previously there were scenarios
where using selective-dump switches would prevent --create from having
any effect. For example, it would fail to do anything in pg_restore
if the archive file had been made by a selective dump, because there
would be no TOC entry for the database.
Since we don't issue \connect either if we don't issue CREATE DATABASE,
this could result in unexpectedly restoring objects into the wrong
database.
Also fix pg_restore's selective restore logic so that when an object is
selected to be restored, we also restore its ACL, comment, and security
label if any. Previously there was no way to get the latter properties
except through tedious mucking about with a -L file. If, for some
reason, you don't want these properties, you can match the old behavior
by adding --no-acl etc.
While at it, try to make _tocEntryRequired() a little better organized
and better documented.
Discussion: https://postgr.es/m/32668.1516848577@sss.pgh.pa.us
get_relation_info() was too optimistic about opening indexes in
partitioned tables, which would raise errors when any queries were
planned on such tables. Fix by ignoring any indexes of the partitioned
kind.
CLUSTER (and ALTER TABLE CLUSTER ON) had a similar problem. Fix by
disallowing these commands in partitioned tables.
Fallout from 8b08f7d4820f.
We had some pretty ad-hoc handling of the public schema and the plpgsql
extension, which are both presumed to exist in template0 but might be
modified or deleted in the database being dumped.
Up to now, by default pg_dump would emit a CREATE EXTENSION IF NOT EXISTS
command as well as a COMMENT command for plpgsql. The usefulness of the
former is questionable, and the latter caused annoying errors in
non-superuser dump/restore scenarios. Let's instead install a rule that
built-in extensions (identified by having low-numbered OIDs) are not to be
dumped. We were doing it that way already in binary-upgrade mode, so this
just makes regular mode behave the same. It remains true that if someone
has installed a non-default ACL on the plpgsql language, that will get
dumped thanks to the pg_init_privs mechanism. This is more consistent with
the handling of built-in objects of other kinds.
Also, change the very ad-hoc mechanism that was used to avoid dumping
creation and comment commands for the public schema. Instead of hardwiring
a test in _printTocEntry(), make use of the DUMP_COMPONENT_ infrastructure
to mark that schema up-front about what we want to do with it. This has
the visible effect that the public schema won't be mentioned in the output
at all, except for updating its ACL if it has a non-default ACL.
Previously, while it was normally not mentioned, --clean mode would drop
and recreate it, again causing headaches for non-superuser usage. This
change likewise makes the public schema less special and more like other
built-in objects.
If plpgsql, or the public schema, has been removed entirely in the source
DB, that situation won't be reproduced in the destination ... but that
was true before.
Discussion: https://postgr.es/m/29048.1516812451@sss.pgh.pa.us
Previously, the docs implied that only Linux and Windows could use huge
pages. That's not quite true: it's just that we only know how to
request them explicitly on those OSes. Be more explicit about what
huge_pages really does and mention that some OSes may use huge pages
automatically.
Author: Thomas Munro and Catalin Iacob
Reviewed-By: Justin Pryzby, Peter Eisentraut
Discussion: https://postgr.es/m/CAEepm=3qzR-hfjepymohuC4XO5phxoSoipOjm6BEhnJHjNR+jg@mail.gmail.com
These were introduced in 4cbb646334b3b998a29abef0d57608d42097e6c9, but
after further analysis and testing, they should not be necessary and
probably weren't the part of that commit that fixed anything.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Connection strings can have items with spaces in them, wrapped in
quotes. The tests however ran a SELECT '$connstr' upon connection which
broke on the embedded quotes. Use dollar quotes on the connstr to
protect against this. This was hit during the development of the macOS
Secure Transport patch, but is independent of it.
Author: Daniel Gustafsson <daniel@yesql.se>
record_image_eq was covered a bit by the materialized view code that it
is meant to support, but record_image_cmp was not tested at all.
While we're here, add more tests to record_eq and record_cmp as well,
for symmetry.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Avoid compiler warnings on MSVC (which doesn't want to see both
__forceinline and inline) and ancient GCC (which doesn't have
__attribute__((always_inline))).
Don't force inline-ing when building at -O0, as the programmer is probably
hoping for exact source-to-object-line correspondence in that case.
(For the moment this only works for GCC; maybe we can extend it later.)
Make pg_attribute_always_inline be syntactically a drop-in replacement
for inline, rather than an additional wart.
And improve the comments.
Thomas Munro and Michail Nikolaev, small tweaks by me
Discussion: https://postgr.es/m/32278.1514863068@sss.pgh.pa.us
Discussion: https://postgr.es/m/CANtu0oiYp74brgntKOxgg1FK5+t8uQ05guSiFU6FYz_5KUhr6Q@mail.gmail.com
If we're inside a lateral subquery, there may be no unparameterized paths
for a particular child relation of an appendrel, in which case we *must*
be able to create similarly-parameterized paths for each other child
relation, else the planner will fail with "could not devise a query plan
for the given query". This means that there are situations where we'd
better be able to reparameterize at least one path for each child.
This calls into question the assumption in reparameterize_path() that
it can just punt if it feels like it. However, the only case that is
known broken right now is where the child is itself an appendrel so that
all its paths are AppendPaths. (I think possibly I disregarded that in
the original coding on the theory that nested appendrels would get folded
together --- but that only happens *after* reparameterize_path(), so it's
not excused from handling a child AppendPath.) Given that this code's been
like this since 9.3 when LATERAL was introduced, it seems likely we'd have
heard of other cases by now if there were a larger problem.
Per report from Elvis Pranskevichus. Back-patch to 9.3.
Discussion: https://postgr.es/m/5981018.zdth1YWmNy@hammer.magicstack.net
Since 9.6, heavyweight locking is not an abstract and unhandled
concern of the parallel machinery, but rather something to which
we have a specific approach.
Commit 28724fd90d2f85a0573a8107b48abad062a86d83 fixed things so that
if a background worker fails to start due to fork() failure or because
it is terminated before startup succeeds, BGWH_STOPPED will be
reported. However, that only helps if the code that uses the
background worker machinery notices the change in status, and the code
in parallel.c did not.
To fix that, do two things. First, make sure that when a worker
exits, it triggers the leader to read from error queues. That way, if
a worker which has attached to an error queue exits uncleanly, the
leader is sure to throw some error, either the contents of the
ErrorResponse sent by the worker, or "lost connection to parallel
worker" if it exited without sending one. To cover the case where
the worker never starts up in the first place or exits before
attaching to the error queue, the ParallelContext now keeps track
of which workers have sent at least one message via the error
queue. A worker which sends no messages by the time the parallel
operation finishes will be checked to see whether it exited before
attaching to the error queue; if so, a new error message, "parallel
worker failed to initialize", will be reported. If not, we'll
continue to wait until it either starts up and exits cleanly, starts
up and exits uncleanly, or fails to start, and then take the
appropriate action.
Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoYnBgXgdTu6wk5YPdWhmgabYc9nY_pFLq=tB=FSLYkD8Q@mail.gmail.com
The folly of not doing this was exposed by the buildfarm: in some cases,
the GUC settings applied through ALTER DATABASE SET may be essential to
interpreting the reloaded data correctly. Another argument why we can't
really get away with the scheme proposed in commit b3f840120 is that it
cannot work for parallel restore: even if the parent process manages to
hang onto the previous GUC state, worker processes would see the state
post-ALTER-DATABASE. (Perhaps we could have dodged that bullet by
delaying DATABASE PROPERTIES restoration to the end of the run, but
that does nothing for the data semantics problem.)
This leaves us with no solution for the default_transaction_read_only issue
that commit 4bd371f6f intended to work around, other than "you gotta remove
such settings before dumping/upgrading". However, in view of the fact that
parallel restore broke that hack years ago and no one has noticed, it's
fair to question how many people care. I'm unexcited about adding a large
dollop of new complexity to handle that corner case.
This would be a one-liner fix, except it turns out that ReconnectToServer
tries to optimize away "redundant" reconnections. While that may have been
valuable when coded, a quick survey of current callers shows that there are
no cases where that's actually useful, so just remove that check. While at
it, remove the function's useless return value.
Discussion: https://postgr.es/m/12453.1516655001@sss.pgh.pa.us
Some things in be-secure-openssl.c and fe-secure-openssl.c were not
actually specific to OpenSSL but could also be used by other
implementations. In order to avoid copy-and-pasting, move some of that
code to common files.
Move the documentation of the SSL API calls are supposed to do into the
headers files, instead of keeping them in the files for the OpenSSL
implementation. That way, they don't have to be duplicated or be
inconsistent when other implementations are added.
Split the "Authentication and Security" section into two separate
sections "Authentication" and "SSL". The latter part has gotten much
longer over time, and doesn't primarily have to do with authentication.
Also, the row_security parameter was inconsistently categorized, so
clean that up while we're here.
This patch rearranges the division of labor between pg_dump and pg_dumpall
so that pg_dump itself handles all properties attached to a single
database. Notably, a database's ACL (GRANT/REVOKE status) and local GUC
settings established by ALTER DATABASE SET and ALTER ROLE IN DATABASE SET
can be dumped and restored by pg_dump. This is a long-requested
improvement.
"pg_dumpall -g" will now produce only role- and tablespace-related output,
nothing about individual databases. The total output of a regular
pg_dumpall run remains the same.
pg_dump (or pg_restore) will restore database-level properties only when
creating the target database with --create. This applies not only to
ACLs and GUCs but to the other database properties it already handled,
that is database comments and security labels. This is more consistent
and useful, but does represent an incompatibility in the behavior seen
without --create.
(This change makes the proposed patch to have pg_dump use "COMMENT ON
DATABASE CURRENT_DATABASE" unnecessary, since there is no case where
the command is issued that we won't know the true name of the database.
We might still want that patch as a feature in its own right, but pg_dump
no longer needs it.)
pg_dumpall with --clean will now drop and recreate the "postgres" and
"template1" databases in the target cluster, allowing their locale and
encoding settings to be changed if necessary, and providing a cleaner
way to set nondefault tablespaces for them than we had before. This
means that such a script must now always be started in the "postgres"
database; the order of drops and reconnects will not work otherwise.
Without --clean, the script will not adjust any database-level properties
of those two databases (including their comments, ACLs, and security
labels, which it formerly would try to set).
Another minor incompatibility is that the CREATE DATABASE commands in a
pg_dumpall script will now always specify locale and encoding settings.
Formerly those would be omitted if they matched the cluster's default.
While that behavior had some usefulness in some migration scenarios,
it also posed a significant hazard of unwanted locale/encoding changes.
To migrate to another locale/encoding, it's now necessary to use pg_dump
without --create to restore into a database with the desired settings.
Commit 4bd371f6f's hack to emit "SET default_transaction_read_only = off"
is gone: we now dodge that problem by the expedient of not issuing ALTER
DATABASE SET commands until after reconnecting to the target database.
Therefore, such settings won't apply during the restore session.
In passing, improve some shaky grammar in the docs, and add a note pointing
out that pg_dumpall's output can't be expected to load without any errors.
(Someday we might want to fix that, but this is not that patch.)
Haribabu Kommi, reviewed at various times by Andreas Karlsson,
Vaishnavi Prabakaran, and Robert Haas; further hacking by me.
Discussion: https://postgr.es/m/CAJrrPGcUurV0eWTeXODwsOYFN=Ekq36t1s0YnFYUNzsmRfdAyA@mail.gmail.com
Most of the code in pg_dump dumps an object's comment, security label,
and ACL auxiliary TOC entries, in that order, immediately after the
object's main TOC entry, and at least dumpComment's API spec says this
isn't optional. dumpDatabase was significantly violating that when
in binary-upgrade mode, by inserting totally unrelated stuff between.
Also, dumpForeignDataWrapper and dumpForeignServer were being randomly
inconsistent. Reorder code so everybody does it the same.
This may be future-proofing us against some code growing a requirement for
such auxiliary entries to be adjacent to their main entry. But for now
it's just neatnik-ism, so I see no need for back-patch.
Discussion: https://postgr.es/m/21714.1516553459@sss.pgh.pa.us
Commit 8561e4840c81f7e345be2df170839846814fa004 neglected to handle
older Python versions that don't support the "with" statement. So write
the tests in a way that older versions can handle as well.
_tocEntryRequired() expects that it can identify ACL, SECURITY LABEL,
and COMMENT TOC entries that are for large objects by seeing whether
the tag for them starts with "LARGE OBJECT ". While that works fine
for actual large objects, which are indeed tagged that way, it's
subject to false positives unless every such entry's tag starts with an
appropriate type ID. And in fact it does not work for ACLs, because
up to now we customarily tagged those entries with just the bare name
of the object. This means that an ACL for an object named
"LARGE OBJECT something" would be misclassified as data not schema,
with undesirable results in a schema-only or data-only dump ---
although pg_upgrade seems unaffected, due to the special case for
binary-upgrade mode further down in _tocEntryRequired().
We can fix this by changing all the dumpACL calls to use the label
strings already in use for comments and security labels, which do
follow the convention of starting with an object type indicator.
Well, mostly they follow it. dumpDatabase() got it wrong, using
just the bare database name for those purposes, so that a database
named "LARGE OBJECT something" would similarly be subject to having
its comment or security label dropped or included when not wanted.
Bring that into line too. (Note that up to now, database ACLs have
not been processed by pg_dump, so that this issue doesn't affect them.)
_tocEntryRequired() itself is not free of fault: it was overly liberal
about matching object tags to "LARGE OBJECT " in binary-upgrade mode.
This looks like it is probably harmless because there would be no data
component to strip anyway in that mode, but at best it's trouble
waiting to happen, so tighten that up too.
The possible misclassification of SECURITY LABEL entries for databases is
in principle a security problem, but the opportunities for actual exploits
seem too narrow to be interesting. The other cases seem like just bugs,
since an object owner can change its ACL or comment for himself, he needn't
try to trick someone else into doing it by choosing a strange name.
This has been broken since per-large-object TOC entries were introduced
in 9.0, so back-patch to all supported branches.
Discussion: https://postgr.es/m/21714.1516553459@sss.pgh.pa.us
In each of the supplied procedural languages (PL/pgSQL, PL/Perl,
PL/Python, PL/Tcl), add language-specific commit and rollback
functions/commands to control transactions in procedures in that
language. Add similar underlying functions to SPI. Some additional
cleanup so that transaction commit or abort doesn't blow away data
structures still used by the procedure call. Add execution context
tracking to CALL and DO statements so that transaction control commands
can only be issued in top-level procedure and block calls, not function
calls or other procedure or block calls.
- SPI
Add a new function SPI_connect_ext() that is like SPI_connect() but
allows passing option flags. The only option flag right now is
SPI_OPT_NONATOMIC. A nonatomic SPI connection can execute transaction
control commands, otherwise it's not allowed. This is meant to be
passed down from CALL and DO statements which themselves know in which
context they are called. A nonatomic SPI connection uses different
memory management. A normal SPI connection allocates its memory in
TopTransactionContext. For nonatomic connections we use PortalContext
instead. As the comment in SPI_connect_ext() (previously SPI_connect())
indicates, one could potentially use PortalContext in all cases, but it
seems safest to leave the existing uses alone, because this stuff is
complicated enough already.
SPI also gets new functions SPI_start_transaction(), SPI_commit(), and
SPI_rollback(), which can be used by PLs to implement their transaction
control logic.
- portalmem.c
Some adjustments were made in the code that cleans up portals at
transaction abort. The portal code could already handle a command
*committing* a transaction and continuing (e.g., VACUUM), but it was not
quite prepared for a command *aborting* a transaction and continuing.
In AtAbort_Portals(), remove the code that marks an active portal as
failed. As the comment there already predicted, this doesn't work if
the running command wants to keep running after transaction abort. And
it's actually not necessary, because pquery.c is careful to run all
portal code in a PG_TRY block and explicitly runs MarkPortalFailed() if
there is an exception. So the code in AtAbort_Portals() is never used
anyway.
In AtAbort_Portals() and AtCleanup_Portals(), we need to be careful not
to clean up active portals too much. This mirrors similar code in
PreCommit_Portals().
- PL/Perl
Gets new functions spi_commit() and spi_rollback()
- PL/pgSQL
Gets new commands COMMIT and ROLLBACK.
Update the PL/SQL porting example in the documentation to reflect that
transactions are now possible in procedures.
- PL/Python
Gets new functions plpy.commit and plpy.rollback.
- PL/Tcl
Gets new commands commit and rollback.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Add support for huge pages (called large pages on Windows) to the
Windows build.
This (probably) breaks compatibility with Windows versions prior to
Windows 2003 or Windows Vista.
Authors: Takayuki Tsunakawa and Thomas Munro
Reviewed by: Magnus Hagander, Amit Kapila
Document how to properly create root and intermediate certificates using
v3_ca extensions and where to place intermediate certificates so they
are properly transferred to the remote side with the leaf certificate to
link to the remote root certificate. This corrects docs that used to
say that intermediate certificates must be stored with the root
certificate.
Also add instructions on how to create root, intermediate, and leaf
certificates.
Discussion: https://postgr.es/m/20180116002238.GC12724@momjian.us
Reviewed-by: Michael Paquier
Backpatch-through: 9.3
The previous code converted SPI_processed to a Python float if it didn't
fit into a Python int. But Python longs have unlimited precision, so
use that instead in all cases.
As in eee50a8d4c389171ad5180568a7221f7e9b28f09, we use the Python
LongLong API unconditionally for simplicity.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Apparently, Peter's compiler has faith that the switch test values here
could never not be valid values of their enums. Mine does not, and
I tend to agree with it.
We don't actually need two code paths, one for 32 bits and one for 64
bits. Since the existing code already assumed that "long long" is
available, we can just use PyLong_FromLongLong() for 64 bits as well.
In Python 2.5 and later, PyLong_FromLong() and PyLong_FromLongLong() use
the same code, so there will be no difference for 64-bit platforms. In
Python 2.4, the code is different, but performance testing showed no
noticeable difference in PL/Python, and that Python version is ancient
anyway.
Discussion: https://www.postgresql.org/message-id/0a02203c-e157-55b2-464e-6087066a1849@2ndquadrant.com
When an UPDATE causes a row to no longer match the partition
constraint, try to move it to a different partition where it does
match the partition constraint. In essence, the UPDATE is split into
a DELETE from the old partition and an INSERT into the new one. This
can lead to surprising behavior in concurrency scenarios because
EvalPlanQual rechecks won't work as they normally did; the known
problems are documented. (There is a pending patch to improve the
situation further, but it needs more review.)
Amit Khandekar, reviewed and tested by Amit Langote, David Rowley,
Rajkumar Raghuwanshi, Dilip Kumar, Amul Sul, Thomas Munro, Álvaro
Herrera, Amit Kapila, and me. A few final revisions by me.
Discussion: http://postgr.es/m/CAJ3gD9do9o2ccQ7j7+tSgiE1REY65XRiMb=yJO3u3QhyP8EEPQ@mail.gmail.com
When an index column is an expression, it makes no sense to compare its
attribute numbers.
This seems to account for remaining buildfarm fallout from 8b08f7d4820f.
At least, it solves the issue in my local 32bit VM -- let's see what the
rest thinks.
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
There used to be a lot of different *Type and *Kind symbol groups to
address objects within different commands, most of which have been
replaced by ObjectType, starting with
b256f2426433c56b4bea3a8102757749885b81ba. But this conversion was never
done for the ACL commands until now.
This change ends up being just a plain replacement of the types and
symbols, without any code restructuring needed, except deleting some now
redundant code.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
For no apparent reason, this function was using a 16bit-wide inhseqno
value, rather than the correct 32 bit width which is what is stored in
the pg_inherits catalog. This becomes evident if you try to create a
table with more than 65535 parents, because this error appears:
ERROR: duplicate key value violates unique constraint «pg_inherits_relid_seqno_index»
DETAIL: Key (inhrelid, inhseqno)=(329371, 0) already exists.
Needless to say, having so many parents is an uncommon situations, which
explains why this error has never been reported despite being having
been introduced with the Postgres95 1.01 sources in commit d31084e9d111:
https://git.postgresql.org/gitweb/?p=postgresql.git;a=blob;f=src/backend/commands/creatinh.c;hb=d31084e9d111#l349
Backpatch all the way back.
David Rowley noticed this while reviewing a patch of mine.
Discussion: https://postgr.es/m/CAKJS1f8Dn7swSEhOWwzZzssW7747YB=2Hi+T7uGud40dur69-g@mail.gmail.com
