Some older OpenSSL versions (0.9.8 branch) define TLS*_VERSION macros
but not the corresponding SSL_OP_NO_* macro, which causes the code for
handling ssl_min_protocol_version/ssl_max_protocol_version to fail to
compile. To fix, add more #ifdefs and error handling.
Reported-by: Victor Wagner <vitus@wagner.pp.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190924101859.09383b4f%40fafnir.local.vm
This test already knew that, to get stable test output, it had to hide
"loops" counts in EXPLAIN ANALYZE results. But that's not nearly enough:
if we get a smaller number of workers than we planned for, then the
"Workers Launched" number will change, and so will all the rows and loops
counts up to the Gather node. This has resulted in repeated failures in
the buildfarm, so adjust the test to filter out all these counts.
(Really, we wouldn't bother with EXPLAIN ANALYZE at all here, except
that currently the only way to verify that executor-time pruning has
happened is to look for '(never executed)' annotations. Those are
stable and needn't be filtered out.)
Back-patch to v11 where the test was introduced.
Discussion: https://postgr.es/m/11952.1569536725@sss.pgh.pa.us
We've noted certain EXPLAIN queries on these tables occasionally showing
unexpected plan choices. This seems to happen because VACUUM sometimes
fails to update relpages/reltuples for one of these single-page tables,
due to bgwriter or checkpointer holding a pin on the lone page at just
the wrong time. To ensure those values get set, insert explicit ANALYZE
operations on these tables after we finish populating them. This
doesn't seem to affect any other test cases, so it's a usable fix.
Back-patch to v12. In principle the issue exists further back, but
we have not seen it before v12, so I won't risk back-patching further.
Discussion: https://postgr.es/m/24480.1569518042@sss.pgh.pa.us
The documentation states that no target settings will be used when
standby.signal is present, but this is not quite the case since
recovery_target_timeline is a valid recovery target for a standby.
Update the documentation with this exception.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/e445616d-023e-a268-8aa1-67b8b335340c%40pgmasters.net
The test name and the following test cases suggest the index created
should be hash index, but it forgot to add 'using hash' in the test case.
This in itself won't improve code coverage as there were some other tests
which were covering the corresponding code. However, it is better if the
added tests serve their actual purpose.
Reported-by: Paul A Jungwirth
Author: Paul A Jungwirth
Reviewed-by: Mahendra Singh
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CA+renyV=Us-5XfMC25bNp-uWSj39XgHHmGE9Rh2cQKMegSj52g@mail.gmail.com
LIKE INCLUDING DEFAULTS tried to copy the attrdef expression without
copying the state of the attgenerated column. This is in fact wrong,
because GENERATED and DEFAULT expressions are not the same kind of animal;
one can contain Vars and the other not. We *must* copy attgenerated
when we're copying the attrdef expression. Rearrange the if-tests
so that the expression is copied only when the correct one of
INCLUDING DEFAULTS and INCLUDING GENERATED has been specified.
Per private report from Manuel Rigger.
Tom Lane and Peter Eisentraut
In-core relation options can use a custom lock mode since 47167b7, that
has lowered the lock available for some autovacuum parameters. However
it forgot to consider custom relation options. This causes failures
with ALTER TABLE SET when changing a custom relation option, as its lock
is not defined. The existing APIs to define a custom reloption does not
allow to define a custom lock mode, so enforce its initialization to
AccessExclusiveMode which should be safe enough in all cases. An
upcoming patch will extend the existing APIs to allow a custom lock mode
to be defined.
The problem can be reproduced with bloom indexes, so add a test there.
Reported-by: Nikolay Sharplov
Analyzed-by: Thomas Munro, Michael Paquier
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
Backpatch-through: 9.6
The array <@ and @> operators do not worry about duplicates: if every
member of array X matches some element of array Y, then X is contained
in Y, even if several members of X get matched to the same Y member.
This was not explicitly stated in the docs though, so improve matters.
Discussion: https://postgr.es/m/156614120484.1310.310161642239149585@wrigleys.postgresql.org
In the v12 contributors list, remove a couple of duplicates
that had crept in due to variant spellings of a person's name.
Try to standardize Japanese names as given-name-first.
Alexander Lakhin
Discussion: https://postgr.es/m/a8263c91-6a21-61d4-3156-34bf2fe54e15@gmail.com
If the bitstring length is not a multiple of 8, we'd shift the
rightmost bits into the pad space, which must be zeroes --- bit_cmp,
for one, depends on that. This'd lead to the result failing to
compare equal to what it should compare equal to, as reported in
bug #16013 from Daryl Waycott.
This is, if memory serves, not the first such bug in the bitstring
functions. In hopes of making it the last one, do a bit more work
than minimally necessary to fix the bug:
* Add assertion checks to bit_out() and varbit_out() to complain if
they are given incorrectly-padded input. This will improve the
odds that manual testing of any new patch finds problems.
* Encapsulate the padding-related logic in macros to make it
easier to use.
Also, remove unnecessary padding logic from bit_or() and bitxor().
Somebody had already noted that we need not re-pad the result of
bit_and() since the inputs are required to be the same length,
but failed to extrapolate that to the other two.
Also, move a comment block that once was near the head of varbit.c
(but people kept putting other stuff in front of it), to put it in
the header block.
Note for the release notes: if anyone has inconsistent data as a
result of saving the output of bitshiftright() in a table, it's
possible to fix it with something like
UPDATE mytab SET bitcol = ~(~bitcol) WHERE bitcol != ~(~bitcol);
This has been broken since day one, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/16013-c2765b6996aacae9@postgresql.org
The code used the destination slot's natts where it intended to
use the source slot's natts. Adding an Assert shows that there
is no case in "make check-world" where these counts are different,
so maybe this is a harmless bug, but it's still a bug.
Takayuki Tsunakawa
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1FD34C0E@G01JPEXMBYT05
Since we introduced the idea of leakproof functions, texteq and textne
were marked leakproof but their sibling text comparison functions were
not. This inconsistency seemed justified because texteq/textne just
relied on memcmp() and so could easily be seen to be leakproof, while
the other comparison functions are far more complex and indeed can
throw input-dependent errors.
However, that argument crashed and burned with the addition of
nondeterministic collations, because now texteq/textne may invoke
the exact same varstr_cmp() infrastructure as the rest. It makes no
sense whatever to give them different leakproofness markings.
After a certain amount of angst we've concluded that it's all right
to consider varstr_cmp() to be leakproof, mostly because the other
choice would be disastrous for performance of many queries where
leakproofness matters. The input-dependent errors should only be
reachable for corrupt input data, or so we hope anyway; certainly,
if they are reachable in practice, we've got problems with requirements
as basic as maintaining a btree index on a text column.
Hence, run around to all the SQL functions that derive from varstr_cmp()
and mark them leakproof. This should result in a useful gain in
flexibility/performance for queries in which non-leakproofness degrades
the efficiency of the query plan.
Back-patch to v12 where nondeterministic collations were added.
While this isn't an essential bug fix given the determination
that varstr_cmp() is leakproof, we might as well apply it now that
we've been forced into a post-beta4 catversion bump.
Discussion: https://postgr.es/m/31481.1568303470@sss.pgh.pa.us
text_pattern_ops and its siblings can't be used with nondeterministic
collations, because they use the text_eq operator which will not behave
as bitwise equality if applied with a nondeterministic collation. The
initial implementation of that restriction was to insert a run-time test
in the related comparison functions, but that is inefficient, may throw
misleading errors, and will throw errors in some cases that would work.
It seems sufficient to just prevent the combination during CREATE INDEX,
so do that instead.
Lacking any better way to identify the opclasses involved, we need to
hard-wire tests for them, which requires hand-assigned values for their
OIDs, which forces a catversion bump because they previously had OIDs
that would be assigned automatically. That's slightly annoying in the
v12 branch, but fortunately we're not at rc1 yet, so just do it.
Back-patch to v12 where nondeterministic collations were added.
In passing, run make reformat-dat-files, which found some unrelated
whitespace issues (slightly different ones in HEAD and v12).
Peter Eisentraut, with small corrections by me
Discussion: https://postgr.es/m/22566.1568675619@sss.pgh.pa.us
Remove mention of ECPG's DECLARE STATEMENT, since that was reverted
yesterday. Rewrite some other entries per suggestions from Peter
Eisentraut. Make a couple of desultory wording and markup adjustments.
Discussion: https://postgr.es/m/d4dff575-90ab-9c8c-cc6f-8c657e2de665@2ndquadrant.com
DST law changes in Fiji and Norfolk Island. Historical corrections
for Alberta, Austria, Belgium, British Columbia, Cambodia, Hong Kong,
Indiana (Perry County), Kaliningrad, Kentucky, Michigan, Norfolk
Island, South Korea, and Turkey.
Although the SQL/JSON tech report makes reference to ECMAScript which
allows both single- and double-quoted strings, all the rest of the
report speaks only of double-quoted string literals in jsonpaths.
That's more compatible with JSON itself; moreover single-quoted strings
are hard to use inside a jsonpath that is itself a single-quoted SQL
literal. So guess that the intent is to allow only double-quoted
literals, and remove lexer support for single-quoted literals.
It'll be less painful to add this again later if we're wrong, than to
remove a shipped feature.
Also, adjust the lexer so that unrecognized backslash sequences are
treated as just meaning the escaped character, not as errors. This
change has much better support in the standards, as JSON, JavaScript
and ECMAScript all make it plain that that's what's supposed to
happen.
Back-patch to v12.
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
This reverts commit bd7c95f0c1a38becffceb3ea7234d57167f6d4bf,
along with assorted follow-on fixes. There are some questions
about the definition and implementation of that statement, and
we don't have time to resolve them before v13 release. Rather
than ship the feature and then have backwards-compatibility
concerns constraining any redesign, let's remove it for now
and try again later.
Discussion: https://postgr.es/m/TY2PR01MB2443EC8286995378AEB7D9F8F5B10@TY2PR01MB2443.jpnprd01.prod.outlook.com
f5f084fc3e has removed test because of its instability. This commit provides
alternative test with determined ordering using extra ORDER BY expression.
Backpatch-through: 12
6cae9d2c10 introduced test for NULL values in KNN SP-GiST. This test relies on
undetermined ordering showing different results on various platforms. This
commit removes that test. Will be replaced with better test later.
Discussion: https://postgr.es/m/6d51305e1159241cabee132f7efc7eff%40xs4all.nl
Backpatch-through: 12
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Reported-by: Nikita Glukhov
Discussion: https://postgr.es/m/826f57ee-afc7-8977-c44c-6111d18b02ec%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
Provide some documentation about the differences between XQuery
regular expressions and those supported by Spencer's regex engine.
Since SQL now exposes XQuery regexps with the LIKE_REGEX operator,
I made this a standalone section designed to help somebody who
has to translate a LIKE_REGEX query to Postgres. (Eventually we might
extend Spencer's engine to allow precise implementation of XQuery,
but not today.)
Reference that in the jsonpath docs, provide definitions of the
XQuery flag letters, and add a description of the JavaScript-inspired
string literal syntax used within jsonpath. Also point out explicitly
that backslashes used within like_regex patterns will need to be doubled.
This also syncs the docs with the decision implemented in commit
d5b90cd64 to desupport XQuery's 'x' flag for now.
Jonathan Katz and Tom Lane
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
Make the error messages around GSSAPI encryption a bit clearer. Tweak
some messages to avoid plural problems.
Also make a code change for clarity. Using "conf" for "confidential"
is quite confusing. Using "conf_state" is perhaps not much better but
that's what the GSSAPI documentation uses, so there is at least some
hope of understanding it.
It's important users be able to know (without looking at the source code)
that running DDL or DDL-like commands can interrupt autovacuum which can
lead to a lot of dead tuples and hence slower database operations.
Reported-by: James Coleman
Author: James Coleman
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAAaqYe-XYyNwML1=f=gnd0qWg46PnvD=BDrCZ5-L94B887XVxQ@mail.gmail.com
