The error message for a missing or invalid system CA when using
sslrootcert=system differs based on the OpenSSL version used.
In OpenSSL 1.0.1-3.0 it is reported as SSL Error, with varying
degrees of helpfulness in the error message. With OpenSSL 3.1 it
is reported as an SSL SYSCALL error with "Undefined error" as
the error message. This fix pulls out the particular error in
OpenSSL 3.1 as a certificate verify error in order to help the
user better figure out what happened, and to keep the ssl test
working. While there is no evidence that extracing the errors
will clobber errno, this adds a guard against that regardless
to also make the consistent with how we handle OpenSSL errors
elsewhere. It also memorizes the output from OpenSSL 3.0 in
the test in cases where the system CA isn't responding.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/c39be3c5-c1a5-1e33-1024-16f527e251a4@enterprisedb.com
This issue can be reproduced by running `make dist` from the root of the
tree. Error introduced in fcb21b3, where additions of links in
installation.sgml require custom rules in standalone-profile.xsl to make
sure that ./INSTALL is generated correctly for the distribution tarball,
where links are replaced by equivalent terms from the profile file
changed by this commit.
Per buildfarm member guaibasaurus.
Discussion: https://postgr.es/m/ZD859FmcMRCNtz0W@paquier.xyz
DST law changes in Egypt, Greenland, Morocco, and Palestine.
When observing Moscow time, Europe/Kirov and Europe/Volgograd now
use the abbreviations MSK/MSD instead of numeric abbreviations,
for consistency with other timezones observing Moscow time.
Also, America/Yellowknife is no longer distinct from America/Edmonton;
this affects some pre-1948 timestamps in that area.
_bt_dedup_pass()'s heapRel argument hasn't been needed or used since
commit cf2acaf4dc made deleting any existing LP_DEAD index tuples the
caller's responsibility.
Utils.pm has a BEGIN block that editorializes on the locale-related
environment variables, primarily in order to stabilize the behavior
of child programs. It turns out that if the calling test script
has already done "use locale", this fails to affect the behavior
of Perl itself, causing locale behavior to be different between
Perl and child programs. That breaks commit cd82e5c79's attempt
to deal with locale-specific behavior in psql.
To fix, we just need to call setlocale() to redo the calculation
of locale.
Per report from Aleksander Alekseev. No back-patch for now, since
there are no locale-dependent TAP tests in prior branches, and
I'm not yet convinced that this won't have side-effects of its own.
Discussion: https://postgr.es/m/CAJ7c6TO9KpYYxoVVseWEQB5KtjWDkt8NfyAeKPcHoe2Jq+ykpw@mail.gmail.com
Commit c6f2f01611 purported to make
this work, but problems remained. In a plain-format backup, the
files from an in-place tablespace got included in the tar file for
the main tablespace, which is wrong but it's not clear that it
has any user-visible consequences. In a tar-format backup, the
TABLESPACE_MAP option is used, and so we never iterated over
pg_tblspc and thus never backed up the in-place tablespaces
anywhere at all.
To fix this, reverse the changes in that commit, so that when we scan
pg_tblspc during a backup, we create tablespaceinfo objects even for
in-place tablespaces. We set the field that would normally contain the
absolute pathname to the relative path pg_tblspc/${TSOID}, and that's
good enough to make basebackup.c happy without any further changes.
However, pg_basebackup needs a couple of adjustments to make it work.
First, it needs to understand that a relative path for a tablespace
means it's an in-place tablespace. Second, it needs to tolerate the
situation where restoring the main tablespace tries to create
pg_tblspc or a subdirectory and finds that it already exists, because
we restore user-defined tablespaces before the main tablespace.
Since in-place tablespaces are only intended for use in development
and testing, no back-patch.
Patch by me, reviewed by Thomas Munro and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmobwvbEp+fLq2PykMYzizcvuNv0a7gPMJtxOTMOuuRLMHg@mail.gmail.com
When compiled with -C ORACLE, ecpg_get_data() had a one-off issue where
it would incorrectly store the null terminator byte to str[-1] when
varcharsize is 0, which is something that can happen when using SQLDA.
This would eat 1 byte from the previous field stored, corrupting the
results generated.
All the callers of ecpg_get_data() estimate and allocate enough storage
for the data received, and the fix of this commit relies on this
assumption. Note that this maps to the case where no padding or
truncation is required.
This issue has been introduced by 3b7ab43 with the Oracle compatibility
option, so backpatch down to v11.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230410.173500.440060475837236886.horikyota.ntt@gmail.com
Backpatch-through: 11
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
If the last few pages in the specified range are empty (all zero),
then log_newpage_range() could try to emit an empty WAL record
containing no FPIs. This at least upsets an Assert in
ReserveXLogInsertLocation, and might perhaps have bad real-world
consequences in non-assert builds.
This has been broken since log_newpage_range() was introduced,
but the case was hard if not impossible to hit before commit 3d6a98457
decided it was okay to leave VM and FSM pages intentionally zero.
Nonetheless, it seems prudent to back-patch. log_newpage_range()
was added in v12 but later back-patched, so this affects all
supported branches.
Matthias van de Meent, per report from Justin Pryzby
Discussion: https://postgr.es/m/ZD1daibg4RF50IOj@telsasoft.com
The nbtree VACUUM WAL record stores its page offset number payload in
blk 0 (just like the closely related nbtree DELETE WAL record). Commit
ebd551f5 fixed a similar issue with the DELETE WAL record, but missed
this one.
We have two existing conventions for long options: either alphabetical
among short options, or all long options after all the short options.
But the convention apparently used here, next to a functionally
related option, is not one of them.
Here we remove the notes which mention which version the given vacuumdb
option is available from. There are now 11 of these notes and they're
both quite untidy and take up far more space than they seem to be worth.
On running a print preview of the compiled HTML, removing these notes
saves about 1 A4 page (~20% less space).
If people need to see which options are available on older versions, then
consulting the documents for that version seems like a good idea. In any
case, when using newer vacuumdb versions on older servers, the user will
receive an error if they try to use an unsupported option.
Additionally, 3 of the notes are warning about the option only being
available from PostgreSQL 9.6 and later. That version's support ended 2.5
years ago. So, it's quite clear that the value of these notes diminishes
over time.
Discussion: https://postgr.es/m/CAApHDvrCQn6tupx2R67VL9RP1Qy4dDuWKRvt4jaB0vk2akQchw@mail.gmail.com
The finalfunc might return a read-write expanded object. If we
de-duplicate multiple call sites for the aggregate, any function(s)
receiving the aggregate result earlier could alter or destroy the
value that reaches the ones called later. This is a brown-paper-bag
bug in commit 42b746d4c, because we actually considered the need
for read-only-ness but failed to realize that it applied to the case
with a finalfunc as well as the case without.
Per report from Justin Pryzby. New error in HEAD,
no need for back-patch.
Discussion: https://postgr.es/m/ZDm5TuKsh3tzoEjz@telsasoft.com
Commit d6b5dee42 failed to suppress that warning from MSVC,
so let's just get rid of all non-ASCII glyphs in the comments.
The comment for iso8859_1_to_ascii_upper[] is not essential,
and the other cases can be handled by spelling out the
Unicode character names.
(I'm now really in the dark as to why MSVC doesn't complain
about predicate.c's comment. But whatever.)
Discussion: https://postgr.es/m/1546512.1681495035@sss.pgh.pa.us
Other vacuumdb options seem to have notes about which version they're
available from, so let's follow this trend for the newly added
--buffer-usage-limit option.
This addresses various deficiencies in the documentation for VACUUM and
ANALYZE's BUFFER_USEAGE_LIMIT docs.
Here we declare "size" in the syntax synopsis for VACUUM and ANALYZE's
BUFFER_USAGE_LIMIT option and then define exactly what values can be
specified for it in the section for that below.
Also, fix the incorrect ordering of vacuumdb options both in the documents
and in vacuumdb's --help output. These should be in alphabetical order.
In passing also add the minimum/maximum range for the BUFFER_USAGE_LIMIT
option. These will also serve as example values that can be modified and
used.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/16845cb1-b228-e157-f293-5892bced9253@enterprisedb.com
Commit 3e310d837 taught isAssignmentIndirectionExpr() to look through
CoerceToDomain nodes. That's not sufficient, because since commit
04fe805a1 it's been possible for the planner to simplify
CoerceToDomain to RelabelType when the domain has no constraints
to enforce. So we need to look through RelabelType too.
Per bug #17897 from Alexander Lakhin. Although 3e310d837 was
back-patched to v11, it seems sufficient to apply this change
to v12 and later, since 04fe805a1 came in in v12.
Dmitry Dolgov
Discussion: https://postgr.es/m/17897-4216c546c3874044@postgresql.org
Buildfarm member hamerkop is unhappy that daitch_mokotoff.c "contains
a character that cannot be represented in the current code page
(932). Save the file in Unicode format to prevent data loss". There
are a lot of non-ASCII characters in comments, but I do not see any
outside a comment, so this is just cosmetic. Nonetheless the warning
is fairly scary and people might waste time trying to understand the
cause, so we ought to silence it.
We have only one other occurrence of a non-ASCII character in .c or .h
files in the tree: predicate.c mentions "Uwe Röhm". It's far from
clear why hamerkop isn't complaining about that too; but it isn't,
so maybe there is some special provision for accented Roman letters.
We can remove the non-letter symbols from the comment for
iso8859_1_to_ascii_upper without any real loss of usefulness,
so let's try that first to see if it silences the warning.
Discussion: https://postgr.es/m/1546512.1681495035@sss.pgh.pa.us
For some reason I had not implemented RBM_ZERO_AND_CLEANUP_LOCK support in
ExtendBufferedRelTo(), likely thinking it not being reachable. But it is
reachable, e.g. when replaying a WAL record for a page in a relation that
subsequently is truncated (likely only reachable when doing crash recovery or
PITR, not during ongoing streaming replication).
As now all of the RBM_* modes are supported, remove assertions checking mode.
As we had no test coverage for this scenario, add a new TAP test. There's
plenty more that ought to be tested in this area...
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/392271.1681238924%40sss.pgh.pa.us
Discussion: https://postgr.es/m/0b5eb82b-cb99-e0a4-b932-3dc60e2e3926@gmail.com
Starting with OpenSSL 1.1.0 there is no need to call PQinitOpenSSL
or PQinitSSL to avoid duplicate initialization of OpenSSL. Add a
note to the documentation to explain this.
Backpatch to all supported versions as older OpenSSL versions are
equally likely to be used for all branches.
Reported-by: Sebastien Flaesch <sebastien.flaesch@4js.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/DBAP191MB12895BFFEC4B5FE0460D0F2FB0459@DBAP191MB1289.EURP191.PROD.OUTLOOK.COM
Backpatch-through: 11, all supported versions
The partition pruning logic assumed that "b IS NOT true" was exactly the
same as "b IS FALSE". This is not the case when considering NULL values.
Fix this so we correctly include any partition which could hold NULL
values for the NOT case.
Additionally, this fixes a bug in the partition pruning code which handles
partitioned tables partitioned like ((NOT boolcol)). This is a seemingly
unlikely schema design, and it was untested and also broken.
Here we add tests for the ((NOT boolcol)) case and insert some actual data
into those tables and verify we do get the correct rows back when running
queries. I've also adjusted the existing boolpart tests to include some
data and verify we get the correct results too.
Both the bugs being fixed here could lead to incorrect query results with
fewer rows being returned than expected. No additional rows could have
been returned accidentally.
In passing, remove needless ternary expression. It's more simple just to
pass !is_not_clause to makeBoolConst(). It makes sense to do this so the
code is consistent with the bug fix in the "else if" condition just below.
David Kimura did submit a patch to fix the first of the issues here, but
that's not what's being committed here.
Reported-by: David Kimura
Reviewed-by: Richard Guo, David Kimura
Discussion: https://postgr.es/m/CAHnPFjQ5qxs6J_p+g8=ww7GQvfn71_JE+Tygj0S7RdRci1uwPw@mail.gmail.com
Backpatch-through: 11, all supported versions
Hash join tuples reuse the HOT status bit to indicate match status
during hash join execution. Correct reuse requires clearing the bit in
all tuples. Serial hash join and parallel multi-batch hash join do so
upon inserting the tuple into the hashtable. Single batch parallel hash
join and batch 0 of unexpected multi-batch hash joins forgot to do this.
It hadn't come up before because hashtable tuple match bits are only
used for right and full outer joins and parallel ROJ and FOJ were
unsupported. 11c2d6fdf5 introduced support for parallel ROJ/FOJ but
neglected to ensure the match bits were reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/flat/CAMbWs48Nde1Mv%3DBJv6_vXmRKHMuHZm2Q_g4F6Z3_pn%2B3EV6BGQ%40mail.gmail.com
bea3d7e has redesigned the regexp engine so as all the allocations go
through palloc() with a dedicated memory context. hba.c had to cope
with the past memory management logic by going through all the HBA and
ident lines generated, then directly free all the regexps found in
AuthTokens to ensure that no leaks would happen. Such leaks could
happen for example in the postmaster after a SIGHUP, in the event of
an HBA and/or ident reload failure where all the new content parsed must
be discarded, including all the regexps that may have been compiled.
Now that regexps are palloc()'d in their own memory context,
MemoryContextDelete() is enough to ensure that all the compiled regexps
are properly gone. Simplifying this logic in hba.c has the effect to
only remove code. Most of it is new in v16, except the part for regexps
compiled in ident entries for the system username, so doing this cleanup
now rather than when v17 opens for business will reduce future diffs
with the upcoming REL_16_STABLE.
Some comments were incorrect since bea3d7e, now fixed to reflect the
reality.
Reviewed-by: Bertrand Drouvot, Álvaro Herrera
Discussion: https://postgr.es/m/ZDdJ289Ky2qEj4h+@paquier.xyz
This GUC was renamed to debug_parallel_query in 5352ca22e. That commit
added an entry into map_old_guc_names[] to allow the old name still to
work. That was done to allow a transition time where the buildfarm
configs could be swapped over to use debug_parallel_query instead. That
work is now complete.
Here we remove the old name with the intention of breaking any user code
which is using force_parallel_query. As mentioned in the commit message
for 5352ca22e, it appeared many users were misled into thinking that
setting this GUC was doing something useful for them to make queries run
more quickly.
Discussion: https://postgr.es/m/CAApHDvoR7EOz7Tvyzrd18FO-Dw2Cp4Uyq25TEWguK+XyCJtzOw@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced relatively recently, after the code
base had parameter name mismatches fixed in bulk (see commits starting
with commits 4274dc22 and 035ce1fe).
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
Like all earlier commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
In the HTML output, this decorates section headers and variable list
terms with a marker ("#") that is a link to the same section/term.
That way, links inside a page can be discovered for easier sharing.
The marker only appears when hovering.
This now requires that all elements that are candidates for such a
link have an id attribute. Otherwise, an error will be generated.
All previously missing ids have been added prior to this patch.
Author: Brar Piening <brar@gmx.de>
Reviewed-by: Karl O. Pinc <kop@karlpinc.com>
Discussion: https://www.postgresql.org/message-id/flat/CAB8KJ=jpuQU9QJe4+RgWENrK5g9jhoysMw2nvTN_esoOU0=a_w@mail.gmail.com
The test previously had a list of OSes that direct I/O was expected to
work on. That worked well enough for the systems in our build farm, but
didn't survive contact with the Debian build bots running on tmpfs via
overlayfs. tmpfs does not support O_DIRECT, but we don't want to
exclude Linux generally.
The new approach is to try to create an empty file with O_DIRECT from
Perl first. If that fails, we'll skip the test and report what the
error was.
Reported-by: Christoph Berg <myon@debian.org>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/ZDYd4A78cT2ULxZZ%40msg.df7cb.de
We can't assert that we're the only process attached to a barrier after
BarrierArriveAndDetachExceptLast(). Although that'll be true almost
always, a late-starting parallel worker can attach very briefly (that
is, immediately detach after checking the phase) right at that moment.
BarrierArriveAndDetachExceptLast() already contains an assertion like
that, but it holds a spinlock preventing the race. This thinko caused a
one-off failure on build farm animal chimaera.
Diagnosed-by: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3590249.1680971629@sss.pgh.pa.us
Tom Lane