This is the way lcov was intended to be used. It is much faster and
more robust and makes the makefiles simpler than running it in each
subdirectory.
The previous coding ran gcov before lcov, but that is useless because
lcov/geninfo call gcov internally and use that information. Moreover,
this led to complications and failures during parallel make. This
separates the two targets: You either use "make coverage" to get
textual output from gcov or "make coverage-html" to get an HTML report
via lcov. (Using both is still problematic because they write the same
output files.)
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
float8_numeric() and float4_numeric() failed to consider the possibility
that the input is an IEEE infinity. The results depended on the
platform-specific behavior of sprintf(): on most platforms you'd get
something like
ERROR: invalid input syntax for type numeric: "inf"
but at least on Windows it's possible for the conversion to succeed and
deliver a finite value (typically 1), due to a nonstandard output format
from sprintf and lack of syntax error checking in these functions.
Since our numeric type lacks the concept of infinity, a suitable conversion
is impossible; the best thing to do is throw an explicit error before
letting sprintf do its thing.
While at it, let's use snprintf not sprintf. Overrunning the buffer
should be impossible if sprintf does what it's supposed to, but this
is cheap insurance against a stack smash if it doesn't.
Problem reported by Taiki Kondo. Patch by me based on fix suggestion
from KaiGai Kohei. Back-patch to all supported branches.
Discussion: https://postgr.es/m/12A9442FBAE80D4E8953883E0B84E088C8C7A2@BPXM01GP.gisp.nec.co.jp
This reverts commit 15bc038f9, along with the followon commits 1635e80d3
and 984c92074 that tried to clean up the problems exposed by bug #14825.
The result was incomplete because it failed to address parallel-query
requirements. With 10.0 release so close upon us, now does not seem like
the time to be adding more code to fix that. I hope we can un-revert this
code and add the missing parallel query support during the v11 cycle.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
The changes in 639928c988c1c2f52bbe7ca89e8c7c78a041b3e2 turned out to
require Perl 5.9.3, which is newer than our minimum required version.
So revert back to the old code for the normal case and only use the new
variant when both coverage and vpath are used. As the minimum Perl
version moves forward, we can drop the old code sometime.
Run xsubpp with the -output option instead of redirecting stdout. That
ensures that the #line directives in the output file point to the right
place in a vpath build. This in turn fixes an error in coverage builds
that it can't find the source files.
Refactor the makefile rules while we're here.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously, we created a variant of the installation instructions for
producing the plain-text INSTALL file by marking up certain parts of
installation.sgml using SGML parameterized marked sections. Marked
sections will not work anymore in XML, so before we can convert the
documentation to XML, we need a new approach.
DocBook provides a "profiling" feature that allows selecting content
based on attributes, which would work here. But it imposes a noticeable
overhead when building the full documentation and causes complications
when building some output formats, and given that we recently spent a
fair amount of effort optimizing the documentation build time, it seems
sad to have to accept that.
So as an alternative, (1) we create our own mini-profiling layer that
adjusts just the text we want, and (2) assemble the pieces of content
that we want in the INSTALL file using XInclude. That way, there is no
overhead when building the full documentation and most of the "ugly"
stuff in installation.sgml can be removed and dealt with out of line.
When requesting a particular replication slot, the new pg_basebackup
option -C/--create-slot creates it before starting to replicate from it.
Further refactor the slot creation logic to include the temporary slot
creation logic into the same function. Add new arguments is_temporary
and preserve_wal to CreateReplicationSlot(). Print in --verbose mode
that a slot has been created.
Author: Michael Banck <michael.banck@credativ.de>
It drops objects outside information_schema that depend on objects
inside information_schema. For example, it will drop a user-defined
view if the view query refers to information_schema.
Discussion: https://postgr.es/m/20170831025345.GE3963697@rfd.leadboat.com
Add some more tests for the --create-slot and --drop-slot options,
verifying that the right kind of slot was created and that the slot was
dropped. While working on an unrelated patch for pg_basebackup, some of
this was temporarily broken without any tests noticing.
posix_fallocate() is not quite a drop-in replacement for fallocate(),
because it is defined to return the error code as its function result,
not in "errno". I (tgl) missed this because RHEL6's version seems
to set errno as well. That is not the case on more modern Linuxen,
though, as per buildfarm results.
Aside from fixing the return-convention confusion, remove the test
for ENOSYS; we expect that glibc will mask that for posix_fallocate,
though it does not for fallocate. Keep the test for EINTR, because
POSIX specifies that as a possible result, and buildfarm results
suggest that it can happen in practice.
Back-patch to 9.4, like the previous commit.
Thomas Munro
Discussion: https://postgr.es/m/1002664500.12301802.1471008223422.JavaMail.yahoo@mail.yahoo.com
The blacklist mechanism added by the preceding commit directly fixes
most of the practical cases that the same-transaction test was meant
to cover. What remains is use-cases like
begin;
create type e as enum('x');
alter type e add value 'y';
-- use 'y' somehow
commit;
However, because the same-transaction test is heuristic, it fails on
small variants of that, such as renaming the type or changing its
owner. Rather than try to explain the behavior to users, let's
remove it and just have a rule that the newly added value can't be
used before being committed, full stop. Perhaps later it will be
worth the implementation effort and overhead to have a more accurate
test for type-was-created-in-this-transaction. We'll wait for some
field experience with v10 before deciding to do that.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
Commit 15bc038f9 allowed ALTER TYPE ADD VALUE to be executed inside
transaction blocks, by disallowing the use of the added value later
in the same transaction, except under limited circumstances. However,
the test for "limited circumstances" was heuristic and could reject
references to enum values that were created during CREATE TYPE AS ENUM,
not just later. This breaks the use-case of restoring pg_dump scripts
in a single transaction, as reported in bug #14825 from Balazs Szilfai.
We can improve this by keeping a "blacklist" table of enum value OIDs
created by ALTER TYPE ADD VALUE during the current transaction. Any
visible-but-uncommitted value whose OID is not in the blacklist must
have been created by CREATE TYPE AS ENUM, and can be used safely
because it could not have a lifespan shorter than its parent enum type.
This change also removes the restriction that a renamed enum value
can't be used before being committed (unless it was on the blacklist).
Andrew Dunstan, with cosmetic improvements by me.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
The --slot option somehow ended up under options controlling the output,
and some other options were in a nonsensical place or were not moved
after recent renamings, so tidy all that up a bit.
A FOR ALL TABLES publication naturally considers all base tables to be a
candidate for replication. This includes transient heaps that are
created during a table rewrite during DDL. This causes failures on the
subscriber side because it will not have a table like pg_temp_16386 to
receive data (and if it did, it would be the wrong table).
The prevent this problem, we filter out any tables that match this
naming pattern and match an actual table from FOR ALL TABLES
publications. This is only a heuristic, meaning that user tables that
match that naming could accidentally be omitted. A more robust solution
might require an explicit marking of such tables in pg_class somehow.
Reported-by: yxq <yxq@o2.pl>
Bug: #14785
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
This was intended as infrastructure for weakening VACUUM's locking
requirements, similar to what was done for btree indexes in commit
2ed5b87f96d473962ec5230fd820abfeaccb2069. However, for hash indexes,
it seems that the improvements which are possible are actually
extremely marginal. Furthermore, performing the LSN cross-check will
end up skipping cleanup far more often than is necessary; we only care
about page modifications due to a VACUUM, but the LSN check will fail
if ANY modification has occurred. So, rather than pressing forward
with that "optimization", just rip the LSN field out.
Patch by me, reviewed by Ashutosh Sharma and Amit Kapila
Discussion: http://postgr.es/m/CAA4eK1JxqqcuC5Un7YLQVhOYSZBS+t=3xqZuEkt5RyquyuxpwQ@mail.gmail.com
On Linux, shared memory segments created with shm_open() are backed by
swap files created in tmpfs. If the swap file needs to be extended,
but there's no tmpfs space left, you get a very unfriendly SIGBUS trap.
To avoid this, force allocation of the full request size when we create
the segment. This adds a few cycles, but none that we wouldn't expend
later anyway, assuming the request isn't hugely bigger than the actual
need.
Make this code #ifdef __linux__, because (a) there's not currently a
reason to think the same problem exists on other platforms, and (b)
applying posix_fallocate() to an FD created by shm_open() isn't very
portable anyway.
Back-patch to 9.4 where the DSM code came in.
Thomas Munro, per a bug report from Amul Sul
Discussion: https://postgr.es/m/1002664500.12301802.1471008223422.JavaMail.yahoo@mail.yahoo.com
If construct_array() or construct_md_array() were given a dimension of
zero, they'd produce an array that contains no elements but has positive
dimension. This violates a general expectation that empty arrays should
have ndims = 0; in particular, while arrays like this print as empty,
they don't compare equal to other empty arrays.
Up to now we've expected callers to avoid making such calls and instead
be careful to call construct_empty_array() if there would be no elements.
But this has always been an easily missed case, and we've repeatedly had to
fix callers to do it right. In bug #14826, Erwin Brandstetter pointed out
yet another such oversight, in ts_lexize(); and a bit of examination of
other call sites found at least two more with similar issues. So let's
fix the problem centrally and permanently by changing these two functions
to construct a proper zero-D empty array whenever the array would be empty.
This renders a few explicit calls of construct_empty_array() redundant,
but the only such place I found that really seemed worth changing was in
ExecEvalArrayExpr().
Although this fixes some very old bugs, no back-patch: the problem is
pretty minor and the risk of changing behavior seems to outweigh the
benefit in stable branches.
Discussion: https://postgr.es/m/20170923125723.1448.39412@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20570.1506198383@sss.pgh.pa.us
* Failure to check for malloc failure (ok, pretty unlikely here, but
that's not an excuse).
* Leakage of open fd on read error, and of malloc'd buffer always.
* Incorrect assumption that a short read would set errno to zero.
* Failure to adhere to message style conventions (in particular,
not reporting errno where relevant; using "couldn't open" rather than
"could not open" is not really in line with project style either).
* Missing newlines on some messages.
Coverity spotted the leak problems; I noticed the rest while
fixing the leaks.
There is no reason to ever prevent the use of SortSupport on Windows
when ICU locales are used. We previously avoided SortSupport on Windows
with UTF-8 server encoding and a non C-locale due to restrictions in
Windows' libc functionality.
This is now considered to be a restriction in one platform's libc
collation provider, and not a more general platform restriction.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Explain more about how the different password authentication methods and
the password_encryption settings relate to each other, give some
upgrading advice, and set a better link from the release notes.
Reviewed-by: Jeff Janes <jeff.janes@gmail.com>
One test case was meant to check that pg_basebackup does not succeed
when a slot is specified with -S but WAL streaming is not selected,
which used to require specifying -X stream. Since -X stream is the
default in PostgreSQL 10, this test case no longer covers that meaning,
but the pg_basebackup invocation happened to fail anyway for the
unrelated reason that the specified replication slot does not exist. To
fix, move the test case to later in the file where the slot does exist,
and add -X none to the invocation so that it covers the originally meant
behavior.
extracted from a patch by Michael Banck <michael.banck@credativ.de>
Invoke vacuum(), as well as "work item" processing, in the PortalContext
that do_autovacuum() has manufactured, which will be reset before each
such invocation. This ensures cleanup of any memory leaked by these
operations. It also avoids the rather dangerous practice of calling
vacuum() in a context that vacuum() itself will destroy while it runs.
There's no known live bug there, but it's not hard to imagine introducing
one if we leave it like this.
Tom Lane, reviewed by Michael Paquier and Alvaro Herrera
Discussion: https://postgr.es/m/13849.1506114543@sss.pgh.pa.us
Buildfarm member skink shows that this is even more flaky than
I thought. There are probably some actual pgbench bugs here
as well as a timing dependency. But we can't have stuff this
unstable in the buildfarm, it obscures other issues.
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
In two cases, we set a different umask for some piece of code and
restore it afterwards. But if the contained code errors out, the umask
is not restored. So add TRY/CATCH blocks to fix that.
This reverts commit f41e56c76e39f02bef7ba002c9de03d62b76de4d.
The build farm client would run the pg_upgrade tests twice, once as part
of the existing pg_upgrade check run and once as part of picking up all
TAP tests by looking for "t" directories. Since the pg_upgrade tests
are pretty slow, we will need a better solution or possibly a build farm
client change before we can proceed with this.
Commit 09cb5c0e7d6fbc9dee26dc429e4fc0f2a88e5272 added a similar
optimization to btree back in 2006, but nobody bothered to implement
the same thing for hash indexes, probably because they weren't
WAL-logged and had lots of other performance problems as well. As
with the corresponding btree case, this eliminates the problem of
potentially needing to refind our position within the page, and cuts
down on pin/unpin traffic as well.
Ashutosh Sharma, reviewed by Alexander Korotkov, Jesper Pedersen,
Amit Kapila, and me. Some final edits to comments and README by
me.
Discussion: http://postgr.es/m/CAE9k0Pm3KTx93K8_5j6VMzG4h5F+SyknxUwXrN-zqSZ9X8ZS3w@mail.gmail.com
There seems to be some considerable imprecision in the timing of -P
progress reports. Nominally each thread ought to produce 2 reports
in this test, but about 10% of the time we only get one, and 1% of
the time we get three, as per buildfarm results so far. Pending
further investigation, treat the last case as a "pass". (I, tgl,
am suspicious that this still might not be lax enough, now that it's
obvious that the behavior is load-dependent; but there's not yet
buildfarm evidence to confirm that suspicion.)
Fabien Coelho
Discussion: https://postgr.es/m/26654.1505232433@sss.pgh.pa.us
The recent addition of a test suite for this module revealed a few
problems. It uses a crypt() method that is no longer considered secure
and doesn't work anymore on some platforms. Using a volatile input
function violates internal sanity check assumptions and leads to
failures on the build farm.
So this module is neither a usable security tool nor a good example for
an extension. No one wanted to argue for keeping or improving it, so
remove it.
Discussion: https://www.postgresql.org/message-id/5645b0d7-cc40-6ab5-c553-292a91091ee7%402ndquadrant.com
Adjust commentary in regc_pg_locale.c to remove mention of the possibility
of not having <wctype.h> functions, since we no longer consider that.
Eliminate duplicate code in wparser_def.c by generalizing the p_iswhat
macro to take a parameter saying what to return for non-ASCII chars
in C locale. (That's not really a consequence of the
USE_WIDE_UPPER_LOWER-ectomy, but I noticed it while doing that.)
These functions are required by SUS v2, which is our minimum baseline
for Unix platforms, and are present on all interesting Windows versions
as well. Even our oldest buildfarm members have them. Thus, we were not
testing the "!USE_WIDE_UPPER_LOWER" code paths, which explains why the bug
fixed in commit e6023ee7f escaped detection. Per discussion, there seems
to be no more real-world value in maintaining this option. Hence, remove
the configure-time tests for wcstombs() and towlower(), remove the
USE_WIDE_UPPER_LOWER symbol, and remove all the !USE_WIDE_UPPER_LOWER code.
There's not actually all that much of the latter, but simplifying the #if
nests is a win in itself.
Discussion: https://postgr.es/m/20170921052928.GA188913@rfd.leadboat.com
The placement of the ifdef blocks in formatting.c was pretty bogus, so
the code failed to compile if USE_WIDE_UPPER_LOWER was not defined.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reported-by: Noah Misch <noah@leadboat.com>
This patch absorbs a few unreleased fixes in the IANA code.
It corresponds to commit 2d8b944c1cec0808ac4f7a9ee1a463c28f9cd00a
in https://github.com/eggert/tz. Non-cosmetic changes include:
TZDEFRULESTRING is updated to match current US DST practice,
rather than what it was over ten years ago. This only matters
for interpretation of POSIX-style zone names (e.g., "EST5EDT"),
and only if the timezone database doesn't include either an exact
match for the zone name or a "posixrules" entry. The latter
should not be true in any current Postgres installation, but
this could possibly matter when using --with-system-tzdata.
Get rid of a nonportable use of "++var" on a bool var.
This is part of a larger fix that eliminates some vestigial
support for consecutive leap seconds, and adds checks to
the "zic" compiler that the data files do not specify that.
Remove a couple of ancient compatibility hacks. The IANA
crew think these are obsolete, and I tend to agree. But
perhaps our buildfarm will think different.
Back-patch to all supported branches, in line with our policy
that all branches should be using current IANA code. Before v10,
this includes application of current pgindent rules, to avoid
whitespace problems in future back-patches.
Discussion: https://postgr.es/m/E1dsWhf-0000pT-F9@gemulon.postgresql.org
"\if :{?variable_name}" will be translated to "\if TRUE" if the variable
exists and "\if FALSE" otherwise. Thus it will be possible to execute code
conditionally on the existence of the variable, regardless of its value.
Fabien Coelho, with some review by Robins Tharakan and some light text
editing by me.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1708260835520.3627@lancre
