The current code can have pg_isready unexpectedly succeed if there is a
server running on the default port. To avoid this we delay running the
test until after a node has been created but before it starts, and then
use that node's port, so we are fairly sure there is nothing running on
the port.
Backpatch to all live branches.
Winsock only signals an FD_CLOSE event once if the other end of the
socket shuts down gracefully. Because each WaitLatchOrSocket() call
constructs and destroys a new event handle every time, with unlucky
timing we can lose it and hang. We get away with this only if the other
end disconnects non-gracefully, because FD_CLOSE is repeatedly signaled
in that case.
To fix this design flaw in our Windows socket support fundamentally,
we'd probably need to rearchitect it so that a single event handle
exists for the lifetime of a socket, or switch to completely different
multiplexing or async I/O APIs. That's going to be a bigger job
and probably wouldn't be back-patchable.
This brute force kludge closes the race by explicitly polling with
MSG_PEEK before sleeping.
Back-patch to all supported releases. This should hopefully clear up
some random build farm and CI hang failures reported over the years. It
might also allow us to try using graceful shutdown in more places again
(reverted in commit 29992a6) to fix instability in the transmission of
FATAL error messages, but that isn't done by this commit.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/176008.1715492071%40sss.pgh.pa.us
When a partitioned table has an index that doesn't support a constraint,
but a partition has an equivalent index that does, then a DETACH
operation would misbehave: a crash in assertion-enabled systems (because
we fail to find the constraint in the parent that we expect to), or a
broken coninhcount value (-1) in production systems (because we blindly
believe that we've successfully detached the parent).
While we should reject an ATTACH of a partition with such an index, we
have failed to do so in existing releases, so adding an error in stable
releases might break the (unlikely) existing applications that rely on
this behavior. At this point I don't even want to reject them in
master, because it'd break pg_upgrade if such databases exist, and there
would be no easy way to fix existing databases without expensive index
rebuilds.
(Later on we could add ALTER TABLE ... ADD CONSTRAINT USING INDEX to
partitioned tables, which would allow the user to fix such patterns. At
that point we could add more restrictions to prevent the problem from
its root.)
Also, add a test case that leaves one table in this condition, so that
we can verify that pg_upgrade continues to work if we later decide to
change the policy on the master branch.
Backpatch to all supported branches.
Co-authored-by: Tender Wang <tndrwang@gmail.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/18500-62948b6fe5522f56@postgresql.org
When creating and initializing a logical slot, the restart_lsn is set
to the latest WAL insertion point (or the latest replay point on
standbys). Subsequently, WAL records are decoded from that point to
find the start point for extracting changes in the
DecodingContextFindStartpoint() function. Since the initial
restart_lsn could be in the middle of a transaction, the start point
must be a consistent point where we won't see the data for partial
transactions.
Previously, when not building a full snapshot, serialized snapshots
were restored, and the SnapBuild jumps to the consistent state even
while finding the start point. Consequently, the slot's restart_lsn
and confirmed_flush could be set to the middle of a transaction. This
could lead to various unexpected consequences. Specifically, there
were reports of logical decoding decoding partial transactions, and
assertion failures occurred because only subtransactions were decoded
without decoding their top-level transaction until decoding the commit
record.
To resolve this issue, the changes prevent restoring the serialized
snapshot and jumping to the consistent state while finding the start
point.
On v17 and HEAD, a flag indicating whether snapshot restores should be
skipped has been added to the SnapBuild struct, and SNAPBUILD_VERSION
has been bumpded.
On backbranches, the flag is stored in the LogicalDecodingContext
instead, preserving on-disk compatibility.
Backpatch to all supported versions.
Reported-by: Drew Callahan
Reviewed-by: Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/2444AA15-D21B-4CCE-8052-52C7C2DAFE5C%40amazon.com
Backpatch-through: 12
This back-patches HEAD commits 066e8ac6e, 6082b3d5d, e7192486d,
and 896cd266f into supported branches. Changes:
* Use xmlAddChildList not xmlAddChild in XMLSERIALIZE
(affects v16 and up only). This was a flat-out coding mistake
that we got away with due to lax checking in previous versions
of xmlAddChild.
* Use xmlParseInNodeContext not xmlParseBalancedChunkMemory.
This is to dodge a bug in xmlParseBalancedChunkMemory in libxm2
releases 2.13.0-2.13.2. While that bug is now fixed upstream and
will probably never be seen in any production-oriented distro, it is
currently a problem on some more-bleeding-edge-friendly platforms.
* Suppress "chunk is not well balanced" errors from libxml2,
unless it is the only error. This eliminates an error-reporting
discrepancy between 2.13 and older releases. This error is
almost always redundant with previous errors, if not flat-out
inappropriate, which is why 2.13 changed the behavior and why
nobody's likely to miss it.
Erik Wienhold and Tom Lane, per report from Frank Streitzig.
Discussion: https://postgr.es/m/trinity-b0161630-d230-4598-9ebc-7a23acdb37cb-1720186432160@3c-app-gmx-bap25
Discussion: https://postgr.es/m/trinity-361ba18b-541a-4fe7-bc63-655ae3a7d599-1720259822452@3c-app-gmx-bs01
If we choose ports in the range typically used for ephemeral ports there
is a danger of encountering a port conflict due to a race condition
between the time we choose the port in a range below that typically used
to allocate ephemeral ports, but higher than the range typically used by
well known services.
Author: Jelte Fenema-Nio, with some editing by me.
Discussion: https://postgr.es/m/d6ee8761-39d1-0033-1afb-d5a57ee056f2@gmail.com
Backpatch to all live branches (12 and up)
Currently they are started in unix socket mode in ost cases, and then
converted to run in TCP mode. This can result in port collisions, and
there is no virtue in startng in unix socket mode, so start as we will
be going on.
Discussion: https://postgr.es/m/d6ee8761-39d1-0033-1afb-d5a57ee056f2@gmail.com
Backpatch to all live branches (12 and up).
The numeric round() and trunc() functions clamp the scale argument to
the range between +/- NUMERIC_MAX_RESULT_SCALE (2000), which is much
smaller than the actual allowed range of type numeric. As a result,
they return incorrect results when asked to round/truncate more than
2000 digits before or after the decimal point.
Fix by using the correct upper and lower scale limits based on the
actual allowed (and documented) range of type numeric.
While at it, use the new NUMERIC_WEIGHT_MAX constant instead of
SHRT_MAX in all other overflow checks, and fix a comment thinko in
power_var() introduced by e54a758d24 -- the minimum value of
ln_dweight is -NUMERIC_DSCALE_MAX (-16383), not -SHRT_MAX, though this
doesn't affect the point being made in the comment, that the resulting
local_rscale value may exceed NUMERIC_MAX_DISPLAY_SCALE (1000).
Back-patch to all supported branches.
Dean Rasheed, reviewed by Joel Jacobson.
Discussion: https://postgr.es/m/CAEZATCXB%2BrDTuMjhK5ZxcouufigSc-X4tGJCBTMpZ3n%3DxxQuhg%40mail.gmail.com
macOS 15's SDK pulls in headers related to <regex.h> when we include
<xlocale.h>. This causes our own regex_t implementation to clash with
the OS's regex_t implementation. Luckily our function names already had
pg_ prefixes, but the macros and typenames did not.
Include <regex.h> explicitly on all POSIX systems, and fix everything
that breaks. Then we can prove that we are capable of fully hiding and
replacing the system regex API with our own.
1. Deal with standard-clobbering macros by undefining them all first.
POSIX says they are "symbolic constants". If they are macros, this
allows us to redefine them. If they are enums or variables, our macros
will hide them.
2. Deal with standard-clobbering types by giving our types pg_
prefixes, and then using macros to redirect xxx_t -> pg_xxx_t.
After including our "regex/regex.h", the system <regex.h> is hidden,
because we've replaced all the standard names. The PostgreSQL source
tree and extensions can continue to use standard prefix-less type and
macro names, but reach our implementation, if they included our
"regex/regex.h" header.
Back-patch to all supported branches, so that macOS 15's tool chain can
build them.
Reported-by: Stan Hu <stanhu@gmail.com>
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/CAMBWrQnEwEJtgOv7EUNsXmFw2Ub4p5P%2B5QTBEgYwiyjy7rAsEQ%40mail.gmail.com
State explicitly that the coordinates in our geometric data types are
float8. Also explain that polygons store their bounding box.
While here, fix the table of geometric data types to show type
"line"'s size correctly: it's 24 bytes not 32. This has somehow
escaped notice since that table was made in 1998.
Per suggestion from Sebastian Skałacki. The size error seems
important enough to justify back-patching.
Discussion: https://postgr.es/m/172000045661.706.1822177575291548794@wrigleys.postgresql.org
The ssl_prefer_server_ciphers setting is quite important from a
security point of view, so simply stating that older versions
doesn't have it isn't very helpful. This adds the version when
the GUC was added to help readers.
Backpatch to all supported versions since this setting has been
around since 9.4.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/5D7E0F5E-E620-4D54-8788-66D421AC76F0@yesql.se
Backpatch-through: v12
Commit d5fd7865 backported BackgroundPsql perl module module with
helper functions for tests running interactive or background psql
tasks to PG 12 to 15, but did not add installation/uninstallation
rules of the build system, causing problems running TAP tests for the
extensions.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Discussion: https://www.postgresql.org/message-id/CABOikdPmRuZrcf_gtgXmQzZ5Tbg9yUJmqXDCAZ2aW%3DWi-PbDyQ%40mail.gmail.com
ProcessIncomingNotify is called from the main processing loop that
normally runs in MessageContext. That outer-loop code assumes that
whatever it allocates will be cleaned up when we're done processing
the current client message --- but if we service a notify interrupt,
then whatever gets allocated before the next switch into
MessageContext will be permanently leaked in TopMemoryContext,
because CommitTransactionCommand sets CurrentMemoryContext to
TopMemoryContext. There are observable leaks associated with
(at least) encoding conversion of incoming queries and parameters
attached to Bind messages.
sinval catchup interrupts have a similar problem. There might be
others, but I've not identified any other clear cases.
To fix, take care to save and restore CurrentMemoryContext across
the Start/CommitTransactionCommand calls in these functions.
Per bug #18512 from wizardbrony. Commit to back branches only;
in HEAD, this was dealt with by the riskier but more thoroughgoing
approach in commit 1afe31f03.
Discussion: https://postgr.es/m/3478884.1718656625@sss.pgh.pa.us
Per buildfarm members prion and trilobite. Back-patch to v12 (all
supported versions), like commit
0844b3968985447ed0a6937cfc8639e379da2fe6.
Strategy reviewed by Tom Lane.
Discussion: https://postgr.es/m/20240628051353.a0.nmisch@google.com
Commit 2c03216d831160bedd72d45f712601b6f7d03f1c moved the tuple data
from there to the buffer-0 data. Back-patch to v12 (all supported
versions), the plan for the next change to this struct.
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
This extends ad98fb14226ae6456fbaed7990ee7591cbe5efd2 to invals of
inplace updates. Trouble requires an inplace update of a catalog having
a TOAST table, so only pg_database was at risk. (The other catalog on
which core code performs inplace updates, pg_class, has no TOAST table.)
Trouble would require something like the inplace-inval.spec test.
Consider GRANT ... ON DATABASE fetching a stale row from cache and
discarding a datfrozenxid update that vac_truncate_clog() has already
relied upon. Back-patch to v12 (all supported versions).
Reviewed (in an earlier version) by Robert Haas.
Discussion: https://postgr.es/m/20240114201411.d0@rfd.leadboat.com
Discussion: https://postgr.es/m/20240512232923.aa.nmisch@google.com
This has no user-visible, important consequences, since other sessions'
catalog scans can't find the relation until we commit. However, this
unblocks introducing a rule about locks required to heap_update() a
pg_class row. CREATE TABLE has been acquiring this lock eventually, but
it can heap_update() pg_class.relchecks earlier. create_toast_table()
has been acquiring only ShareLock. Back-patch to v12 (all supported
versions), the plan for the commit relying on the new rule.
Reviewed (in an earlier version) by Robert Haas.
Discussion: https://postgr.es/m/20240611024525.9f.nmisch@google.com
Commit 5b562644fec696977df4a82790064e8287927891 added a comment that
SetRelationHasSubclass() callers must hold this lock. When commit
17f206fbc824d2b4b14480199ca9ff7dea417eda extended use of this column to
partitioned indexes, it didn't take the lock. As the latter commit
message mentioned, we currently never reset a partitioned index to
relhassubclass=f. That largely avoids harm from the lock omission. The
cause for fixing this now is to unblock introducing a rule about locks
required to heap_update() a pg_class row. This might cause more
deadlocks. It gives minor user-visible benefits:
- If an ALTER INDEX SET TABLESPACE runs concurrently with ALTER TABLE
ATTACH PARTITION or CREATE PARTITION OF, one transaction blocks
instead of failing with "tuple concurrently updated". (Many cases of
DDL concurrency still fail that way.)
- Match ALTER INDEX ATTACH PARTITION in choosing to lock the index.
While not user-visible today, we'll need this if we ever make something
set the flag to false for a partitioned index, like ANALYZE does today
for tables. Back-patch to v12 (all supported versions), the plan for
the commit relying on the new rule. In back branches, add
LockOrStrongerHeldByMe() instead of adding a LockHeldByMe() parameter.
Reviewed (in an earlier version) by Robert Haas.
Discussion: https://postgr.es/m/20240611024525.9f.nmisch@google.com
Most comments concern RELKIND_VIEW. One addresses the ExecUpdate()
"tupleid" parameter. A later commit will rely on these facts, but they
hold already. Back-patch to v12 (all supported versions), the plan for
that commit.
Reviewed (in an earlier version) by Robert Haas.
Discussion: https://postgr.es/m/20240512232923.aa.nmisch@google.com
This covers both regular and inplace changes, since bugs arise at their
intersection. Where marked, these witness extant bugs. Back-patch to
v12 (all supported versions).
Reviewed (in an earlier version) by Robert Haas.
Discussion: https://postgr.es/m/20240512232923.aa.nmisch@google.com
errfinish() assumes that the __FUNC__ and __FILE__ arguments it's
passed are compile-time constant strings that can just be pointed
to rather than physically copied. However, it's possible for LLVM
to generate code in which those pointers point into a dynamically
loaded code segment. If that segment gets unloaded before we're
done with the ErrorData struct, we have dangling pointers that
will lead to SIGSEGV. In simple cases that won't happen, because we
won't unload LLVM code before end of transaction. But it's possible
to happen if the error is thrown within end-of-transaction code run by
_SPI_commit or _SPI_rollback, because since commit 2e517818f those
functions clean up by ending the transaction and starting a new one.
Rather than fixing this by adding pstrdup() overhead to every
elog/ereport sequence, let's fix it by copying the risky pointers
in CopyErrorData(). That solves it for _SPI_commit/_SPI_rollback
because they use that function to preserve the error data across
the transaction end/restart sequence; and it seems likely that
any other code doing something similar would need to do that too.
I'm suspicious that this behavior amounts to an LLVM bug (or a
bug in our use of it?), because it implies that string constant
references that should be pointer-equal according to a naive
understanding of C semantics will sometimes not be equal.
However, even if it is a bug and someday gets fixed, we'll have
to cope with the current behavior for a long time to come.
Report and patch by me. Back-patch to all supported branches.
Discussion: https://postgr.es/m/1565654.1719425368@sss.pgh.pa.us
We did not recover the subtransaction IDs of prepared transactions
when starting a hot standby from a shutdown checkpoint. As a result,
such subtransactions were considered as aborted, rather than
in-progress. That would lead to hint bits being set incorrectly, and
the subtransactions suddenly becoming visible to old snapshots when
the prepared transaction was committed.
To fix, update pg_subtrans with prepared transactions's subxids when
starting hot standby from a shutdown checkpoint. The snapshots taken
from that state need to be marked as "suboverflowed", so that we also
check the pg_subtrans.
Backport to all supported versions.
Discussion: https://www.postgresql.org/message-id/6b852e98-2d49-4ca1-9e95-db419a2696e0@iki.fi
This went unnoticed, because only a few existing callers of
BackgroundPsql->query used the result, and the ones that did were not
bothered by an extra newline. I noticed because I was about to add a
new test that checks the result.
Backport to all supported versions, since I just backported the
BackgroundPsql facility to all supported versions too.
Backport the new BackgroundPsql modules and the constructor functions,
background_psql() and interactive_psql, to all supported
branches. That makes it easier to backpatch tests that use it.
BackgroundPsql was introduced in version 16. On version 16, this
commit backports just the new timeout argument from master (commit
334f512f45). On older branches, the whole facility. This includes the
change to `use warnings FATAL => 'all'`, which we haven't otherwise
backported, but it seems good to keep the file identical across
branches.
Discussion: https://www.postgresql.org/message-id/b7c64f20-ea01-4f15-9088-0cd6832af149@iki.fi
Commit 4c1532763a removed some redundant uses of 'use 5.008001;' in perl
scripts, including in plperl's plc_perlboot.pl. Because it made other
changes it wasn't backpatched. However, now this is causing a failure on
back branches when built with bleeding edge perl. Therefore, backpatch
just that part of it which removed those uses, from 15 all the way down
to 9.2, which is the earliest version currently built in the buildfarm.
per report from Alexander Lakhin
Discussion: https://postgr.es/m/4cc2ee93-e03c-8e13-61ed-412e7e6ff19d@gmail.com
afterTriggerInvokeEvents and AfterTriggerExecute have always
treated it as an error if the trigger OID mentioned in a queued
after-trigger event can't be found. However, that fails to
account for the edge case where the trigger's been dropped in
the current transaction since queueing the event. There seems
no very good reason to disallow that case, so instead silently
do nothing if the trigger OID can't be found.
This does give up a little bit of bug-detection ability, but I don't
recall that these error messages have ever actually revealed a bug,
so it seems mostly theoretical. Alternatives such as marking
pending events DONE at the time of dropping a trigger would be
complicated and perhaps introduce bugs of their own.
Per bug #18517 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/18517-af2d19882240902c@postgresql.org
Reconstruction of an SP-GiST index by REINDEX CONCURRENTLY may
insert some REDIRECT tuples. This will typically happen in
a transaction that lacks an XID, which leads either to assertion
failure in spgFormDeadTuple or to insertion of a REDIRECT tuple
with zero xid. The latter's not good either, since eventually
VACUUM will apply GlobalVisTestIsRemovableXid() to the zero xid,
resulting in either an assertion failure or a garbage answer.
In practice, since REINDEX CONCURRENTLY locks out index scans
till it's done, it doesn't matter whether it inserts REDIRECTs
or PLACEHOLDERs; and likewise it doesn't matter how soon VACUUM
reduces such a REDIRECT to a PLACEHOLDER. So in non-assert builds
there's no observable problem here, other than perhaps a little
index bloat. But it's not behaving as intended.
To fix, remove the failing Assert in spgFormDeadTuple, acknowledging
that we might sometimes insert a zero XID; and guard VACUUM's
GlobalVisTestIsRemovableXid() call with a test for valid XID,
ensuring that we'll reduce such a REDIRECT the first time VACUUM
sees it. (Versions before v14 use TransactionIdPrecedes here,
which won't fail on zero xid, so they really have no bug at all
in non-assert builds.)
Another solution could be to not create REDIRECTs at all during
REINDEX CONCURRENTLY, making the relevant code paths treat that
case like index build (which likewise knows that no concurrent
index scans can be happening). That would allow restoring the
Assert in spgFormDeadTuple, but we'd still need the VACUUM change
because redirection tuples with zero xid may be out there already.
But there doesn't seem to be a nice way for spginsert() to tell that
it's being called in REINDEX CONCURRENTLY without some API changes,
so we'll leave that as a possible future improvement.
In HEAD, also rename the SpGistState.myXid field to redirectXid,
which seems less misleading (since it might not in fact be our
transaction's XID) and is certainly less uninformatively generic.
Per bug #18499 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18499-8a519c280f956480@postgresql.org
DeleteInitPrivs did not get the memo about how, when dropping a
whole object (with subid == 0), you should drop entries relating
to its sub-objects too. This is visible in the test_pg_dump test
case if one drops the extension at the end: the entry for
GRANT SELECT(col1) ON regress_pg_dump_table TO public;
was still present in pg_init_privs afterwards, although it was
pointing to a dangling table OID.
Noted while fooling with a fix for REASSIGN OWNED for pg_init_privs
entries. This bug is aboriginal in the pg_init_privs feature
though, and there seems no reason not to back-patch the fix.
The manual says clearly that punctuation in the input of
websearch_to_tsquery() is ignored, except for the special cases
of dashes and quotes. However, this failed for cases like
"(foo bar) or something", or in general an ISOPERATOR character
in front of the "or". We'd switch back to WAITOPERAND state,
then ignore the operator character while remaining in that state,
and then reach the "or" in WAITOPERAND state which (intentionally)
makes us treat it as data.
The fix is simple enough: if we see an ISOPERATOR character while in
WAITOPERATOR state, we have to skip it while staying in that state.
(We don't need to worry about other punctuation characters: those will
be consumed as though they were words, but then rejected by lexizing.)
In v14 and up (since commit eb086056f) we can simplify the code a bit
more too, because there is no longer a reason for the WAITOPERAND
state to distinguish between quoted and unquoted operands.
Per bug #18479 from Manos Emmanouilidis. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18479-d9b46e2fc242c33e@postgresql.org
The previous coding here assumed that we didn't need to recheck any
of the querytree tests made in exec_simple_check_plan(). I think
we supposed that those properties were fully determined by the
syntax of the source text and hence couldn't change. That is true
for most of them, but at least hasTargetSRFs and hasAggs can change
by dint of forcibly dropping an originally-referenced function and
recreating it with new properties. That leads to "unexpected plan
node type" or similar failures.
These tests are pretty cheap compared to the cost of replanning, so
rather than sweat over exactly which properties need to be rechecked,
let's just recheck them all. Hence, factor out those tests into a new
function exec_is_simple_query(), and rearrange callers as needed.
A second problem in the same area was that if we failed during
replanning or during exec_save_simple_expr(), we'd potentially
leave behind now-dangling pointers to the old simple expression,
potentially resulting in crashes later. To fix, clear those pointers
before replanning.
The v12 code looks quite different in this area but still has the
bug about needing to recheck query simplicity. I chose to back-patch
all of the plpgsql_simple.sql test script, which formerly didn't exist
in this branch.
Per bug #18497 from Nikita Kalinin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18497-fe93b6da82ce31d4@postgresql.org
The purpose of the function is to reduce the effective
autovacuum_multixact_freeze_max_age if the multixact members SLRU is
approaching wraparound, to make multixid freezing more aggressive.
The returned value should therefore never be greater than plain
autovacuum_multixact_freeze_max_age.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/85fb354c-f89f-4d47-b3a2-3cbd461c90a3@iki.fi
Backpatch-through: 12, all supported versions
infer_arbiter_indexes failed to renumber varnos in index expressions
or predicates that it got from the catalogs. This escaped detection
up to now because the stored varnos in such trees will be 1, and an
INSERT's result relation is usually the first rangetable entry,
so that that was fine. However, in cases such as inserting through
an updatable view, it's not fine, leading to failure to match the
expressions to the query with ensuing "there is no unique or exclusion
constraint matching the ON CONFLICT specification" errors.
Fix by copy-and-paste from get_relation_info().
Per bug #18502 from Michael Wang. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/18502-545b53f5b81e54e0@postgresql.org
test_predtest() neglected to consider the possibility that
SPI_plan_get_cached_plan would return NULL. This led to a core
dump if the input (incorrectly) contains more than one SQL
command.
While here, let's expend more than zero effort on the error
message for this case and nearby ones.
Per (half of) bug #18483 from Alexander Kozhemyakin.
Back-patch to all supported branches, not because this is
very significant (it's merely test scaffolding) but to make
our world a bit safer for fuzz testing.
Discussion: https://postgr.es/m/18483-30bfff42de238000@postgresql.org
Normally this case isn't even reachable by non-superusers, since
permissions checks prevent naming such a table. However, it is
possible to make it happen by altering a parent table whose child
is another session's temp table.
We definitely can't support any such ALTER that requires modifying
the contents of such a table, since we lack access to the other
session's temporary-buffer pool. But there seems no good reason
to allow it even if it'd only require changing catalog contents.
One reason not to allow it is that we'd rather not expose the
implementation-dependent behavior of whether a specific ALTER
requires touching the table contents. Another is that there may
be (in future, even if not today) optimizations that assume that
a session's own temp tables won't be modified by other sessions.
Hence, add a RELATION_IS_OTHER_TEMP() check to all the places
where ALTER TABLE currently does CheckTableNotInUse(). (I looked
through all other callers of CheckTableNotInUse(), and they seem
OK already.)
Per bug #18492 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18492-c7a2634bf4968763@postgresql.org
If the CALL is within an atomic context (e.g. there's an outer
transaction block), _SPI_execute_plan should acquire a fresh snapshot
to execute any such functions with. We failed to do that and instead
passed them the Portal snapshot, which had been acquired at the start
of the current SQL command. This'd lead to seeing stale values of
rows modified since the start of the command.
This is arguably a bug in 84f5c2908: I failed to see that "are we in
non-atomic mode" needs to be defined the same way as it is further
down in _SPI_execute_plan, i.e. check !_SPI_current->atomic not just
options->allow_nonatomic. Alternatively the blame could be laid on
plpgsql, which is unconditionally passing allow_nonatomic = true
for CALL/DO even when it knows it's in an atomic context. However,
fixing it in spi.c seems like a better idea since that will also fix
the problem for any extensions that may have copied plpgsql's coding
pattern.
While here, update an obsolete comment about _SPI_execute_plan's
snapshot management.
Per report from Victor Yegorov. Back-patch to all supported versions.
Discussion: https://postgr.es/m/CAGnEboiRe+fG2QxuBO2390F7P8e2MQ6UyBjZSL_w1Cej+E4=Vw@mail.gmail.com
Previously, when considering LIMIT pushdown, postgres_fdw failed to
check whether the query has this clause, which led to pushing false
LIMIT clauses, causing incorrect results.
This clause has been supported since v13, so we need to do a
remote-version check before deciding that it will be safe to push such a
clause, but we do not currently have a way to do the check (without
accessing the remote server); disable pushing such a clause for now.
Oversight in commit 357889eb1. Back-patch to v13, where that commit
added the support.
Per bug #18467 from Onder Kalaci.
Patch by Japin Li, per a suggestion from Tom Lane, with some changes to
the comments by me. Review by Onder Kalaci, Alvaro Herrera, and me.
Discussion: https://postgr.es/m/18467-7bb89084ff03a08d%40postgresql.org
Before the v13-era commit 913bbd88d, check_sql_fn_retval fails to
resolve polymorphic output types and then just throws up its hands and
assumes the check will be made at runtime. I think that's true for
ordinary functions returning RECORD, but it doesn't happen in CALL,
potentially resulting in crashes if the actual output of the SQL
procedure's SELECT doesn't match the type inferred from polymorphism.
With a little bit of rearrangement, we can use get_call_result_type
instead of get_func_result_type and thereby infer the correct types.
I'm still unwilling to back-patch all of 913bbd88d, so if the types
don't match you'll get an error rather than perhaps silently inserting
a cast as v13 and later can. That's consistent with prior behavior
though, so it seems fine.
Prior to 70ffb27b2, you'd typically get other errors due to other
shortcomings of CALL's management of polymorphism. Nonetheless,
this is an independent bug.
Although there is no bug in v13 and up, it seems prudent to add
the test case for this to the newer branches too. It's clearly
an under-tested area.
Per report from Andrew Bille.
Discussion: https://postgr.es/m/CAJnzarw9EeWHAQRm76dXd=7j+rgw6ERqC=nCay8jeFqTwKwhqQ@mail.gmail.com
The documentation for POSIX semaphores is missing a reference to
max_wal_senders. This commit fixes that in the same way that
commit 4ebe51a5fb fixed the same issue in the documentation for
System V semaphores.
Discussion: https://postgr.es/m/20240517164452.GA1914161%40nathanxps13
Backpatch-through: 12
In a procedure or function returning tuple, we use that function to
parse the Tcl script's result, which is supposed to be a Tcl list.
If it isn't, you get an error. Commit 26abb50c4 incautiously
supposed that we could use throw_tcl_error() to report such an error.
That doesn't actually work, because low-level functions like
Tcl_ListObjGetElements() don't fill Tcl's errorInfo variable.
The result is either a null-pointer-dereference crash or emission
of misleading context information describing the previous Tcl error.
Back off to just reporting the interpreter's result string, and
improve throw_tcl_error()'s comment to explain when to use it.
Also, although the similar code in pltcl_trigger_handler() avoided
this mistake, it was using a fairly confusing wording of the
error message. Improve that while we're here.
Per report from A. Kozhemyakin. Back-patch to all supported
branches.
Erik Wienhold and Tom Lane
Discussion: https://postgr.es/m/6a2a1c40-2b2c-4a33-8b72-243c0766fcda@postgrespro.ru
The formulas for SEMMNI and SEMMNS do not include the archiver
process, which was converted to an auxiliary process in v14, and
the WAL summarizer process, which was introduced in v17. This
commit corrects these formulas and adds a missing reference to
max_wal_senders nearby. Since this section of the documentation
tends to be incorrect quite often, we should likely give up on
documenting the exact formulas in favor of something less fragile,
but that is left as a future exercise.
Reported-by: Sami Imseih
Reviewed-by: Sami Imseih
Discussion: https://postgr.es/m/20240517164452.GA1914161%40nathanxps13
Backpatch-through: 12
Coverity complains that ECPGdebug is accessing debugstream without
holding debug_mutex, which is a fair complaint: we should take
debug_mutex while changing the settings ecpg_log looks at.
In some branches it also complains about unlocked use of simple_debug.
I think it's intentional and safe to have a quick unlocked check of
simple_debug at the start of ecpg_log, since that early exit will
always be taken in non-debug cases. But we should recheck
simple_debug after acquiring the mutex. In the worst case, calling
ECPGdebug concurrently with ecpg_log in another thread could result
in a null-pointer dereference due to debugstream transiently being
NULL while simple_debug isn't 0.
This is largely hypothetical, since it's unlikely anybody uses
ECPGdebug() at all in the field, and our own regression tests
don't seem to be hitting the theoretical race conditions either.
Still, if we're going to the trouble of having mutexes here, we ought
to be using them in a way that's actually safe not just almost safe.
Hence, back-patch to all supported branches.
Parameter column_name must be an existing column because ALTER
MATERIALIZED VIEW cannot add new columns. The old description was
likely copied from ALTER TABLE.
Author: Erik Wienhold
Discussion: https://postgr.es/m/6880ca53-7961-4eeb-86d5-6bd05fc2027e@ewie.name
Backpatch-through: 12
We are capable of optimizing MIN() and MAX() aggregates on indexed
columns into subqueries that exploit the index, rather than the normal
thing of scanning the whole table. When we do this, we replace the
Aggref node(s) with Params referencing subquery outputs. Such Params
really ought to be included in the per-plan-node extParam/allParam
sets computed by SS_finalize_plan. However, we've never done so
up to now because of an ancient implementation choice to perform
that substitution during set_plan_references, which runs after
SS_finalize_plan, so that SS_finalize_plan never sees these Params.
The cleanest fix would be to perform a separate tree walk to do
these substitutions before SS_finalize_plan runs. That seems
unattractive, first because a whole-tree mutation pass is expensive,
and second because we lack infrastructure for visiting expression
subtrees in a Plan tree, so that we'd need a new function knowing
as much as SS_finalize_plan knows about that. I also considered
swapping the order of SS_finalize_plan and set_plan_references,
but that fell foul of various assumptions that seem tricky to fix.
So the approach adopted here is to teach SS_finalize_plan itself
to check for such Aggrefs. I refactored things a bit in setrefs.c
to avoid having three copies of the code that does that.
Back-patch of v17 commits d0d44049d and 779ac2c74. When d0d44049d
went in, there was no evidence that it was fixing a reachable bug,
so I refrained from back-patching. Now we have such evidence.
Per bug #18465 from Hal Takahara. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18465-2fae927718976b22@postgresql.org
Discussion: https://postgr.es/m/2391880.1689025003@sss.pgh.pa.us
Commit 695b4a113ab added a dependency on retrieving oldestxid from
pg_control, which only exists in 9.0 and onwards, but the check for
8.4 as the oldest version was retained. Since there has been few if
any complaints of 8.4 upgrades not working, fix by setting 9.0 as
the oldest version supported rather than resurrecting 8.4 support.
Backpatch to all supported versions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1973418.1657040382@sss.pgh.pa.us
Backpatch-through: v12
Specifically, it terminates a background worker even if the caller
couldn't terminate the background worker with pg_terminate_backend().
Commit 3a9b18b3095366cd0c4305441d426d04572d88c1 neglected to update
this. Back-patch to v13, which introduced DROP DATABASE FORCE.
Reviewed by Amit Kapila. Reported by Kirill Reshke.
Discussion: https://postgr.es/m/20240429212756.60.nmisch@google.com
