The majority of our audience is probably using a pre-packaged Postgres
build rather than raw sources. For them, much of runtime.sgml is not
too relevant, and they should be reading the packager's docs instead.
Add some notes pointing that way in appropriate places.
Text by me; thanks to Daniel Gustafsson for review and discussion,
and to Laurenz Albe for an earlier version.
Discussion: https://postgr.es/m/159430831443.16535.11360317280100947016@wrigleys.postgresql.org
We were already raising an error for DROP INDEX CONCURRENTLY on a
partitioned table, albeit a different and confusing one:
ERROR: DROP INDEX CONCURRENTLY must be first action in transaction
Change that to throw a more comprehensible error:
ERROR: cannot drop partitioned index \"%s\" concurrently
Michael Paquier authored the test case for indexes on temporary
partitioned tables.
Backpatch to 11, where indexes on partitioned tables were added.
Reported-by: Jan Mussler <jan.mussler@zalando.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16594-d2956ca909585067@postgresql.org
Historically there's been a hard-wired assumption here that no line of
a .pgpass file could be as long as NAMEDATALEN*5 bytes. That's a bit
shaky to start off with, because (a) there's no reason to suppose that
host names fit in NAMEDATALEN, and (b) this figure fails to allow for
backslash escape characters. However, it fails completely if someone
wants to use a very long password, and we're now hearing reports of
people wanting to use "security tokens" that can run up to several
hundred bytes. Another angle is that the file is specified to allow
comment lines, but there's no reason to assume that long comment lines
aren't possible.
Rather than guessing at what might be a more suitable limit, let's
replace the fixed-size buffer with an expansible PQExpBuffer. That
adds one malloc/free cycle to the typical use-case, but that's surely
pretty cheap relative to the I/O this code has to do.
Also, add TAP test cases to exercise this code, because there was no
test coverage before.
This reverts most of commit 2eb3bc588, as there's no longer a need for
a warning message about overlength .pgpass lines. (I kept the explicit
check for comment lines, though.)
In HEAD and v13, this also fixes an oversight in 74a308cf5: there's not
much point in explicit_bzero'ing the line buffer if we only do so in two
of the three exit paths.
Back-patch to all supported branches, except that the test case only
goes back to v10 where src/test/authentication/ was added.
Discussion: https://postgr.es/m/4187382.1598909041@sss.pgh.pa.us
Per discussion, we're planning to remove parser support for postfix
operators in order to simplify the grammar. So it behooves us to
put out a deprecation notice at least one release before that.
There is only one built-in postfix operator, ! for factorial.
Label it deprecated in the docs and in pg_description, and adjust
some examples that formerly relied on it. (The sister prefix
operator !! is also deprecated. We don't really have to remove
that one, but since we're suggesting that people use factorial()
instead, it seems better to remove both operators.)
Also state in the CREATE OPERATOR ref page that postfix operators
in general are going away.
Although this changes the initial contents of pg_description,
I did not force a catversion bump; it doesn't seem essential.
In v13, also back-patch 4c5cf5431, so that there's someplace for
the <link>s to point to.
Mark Dilger and John Naylor, with some adjustments by me
Discussion: https://postgr.es/m/BE2DF53D-251A-4E26-972F-930E523580E9@enterprisedb.com
collectMatchBitmap() needs to re-find the index tuple it was previously
looking at, after transiently dropping lock on the index page it's on.
The tuple should still exist and be at its prior position or somewhere
to the right of that, since ginvacuum never removes tuples but
concurrent insertions could add one. However, there was a thinko in
that logic, to the effect of expecting any inserted tuples to have the
same index "attnum" as what we'd been scanning. Since there's no
physical separation of tuples with different attnums, it's not terribly
hard to devise scenarios where this fails, leading to transient "lost
saved point in index" errors. (While I've duplicated this with manual
testing, it seems impossible to make a reproducible test case with our
available testing technology.)
Fix by just continuing the scan when the attnum doesn't match.
While here, improve the error message used if we do fail, so that it
matches the wording used in btree for a similar case.
collectMatchBitmap()'s posting-tree code path was previously not
exercised at all by our regression tests. While I can't make
a regression test that exhibits the bug, I can at least improve
the code coverage here, so do that. The test case I made for this
is an extension of one added by 4b754d6c1, so it only works in
HEAD and v13; didn't seem worth trying hard to back-patch it.
Per bug #16595 from Jesse Kinkead. This has been broken since
multicolumn capability was added to GIN (commit 27cb66fdf),
so back-patch to all supported branches.
Discussion: https://postgr.es/m/16595-633118be8eef9ce2@postgresql.org
We were displaying the wrong phase information for 'info' message in the
index clean up phase because we were switching to the previous phase a bit
early. We were also not displaying context information for heap phase
unless the block number is valid which is fine for error cases but for
messages at 'info' or lower error level it appears to be inconsistent with
index phase information.
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Reviewed-by: Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k4HcbhPnCs7paRTw1K-AHin8y4xKomB9Ru0ATw0UeTy2w@mail.gmail.com
The trouble with doing this is that an apparently-constant subquery
output column isn't really constant if it is a grouping column that
appears in only some of the grouping sets. A qual using such a
column would be subject to incorrect const-folding after push-down,
as seen in bug #16585 from Paul Sivash.
To fix, just disable qual pushdown altogether if the sub-query has
nonempty groupingSets. While we could imagine far less restrictive
solutions, there is not much point in working harder right now,
because subquery_planner() won't move HAVING clauses to WHERE within
such a subquery. If the qual stays in HAVING it's not going to be
a lot more useful than if we'd kept it at the outer level.
Having said that, this restriction could be removed if we used a
parsetree representation that distinguished such outputs from actual
constants, which is something I hope to do in future. Hence, make
the patch a minimal addition rather than integrating it more tightly
(e.g. by renumbering the existing items in subquery_is_pushdown_safe's
comment).
Back-patch to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/16585-9d8c340d23ade8c1@postgresql.org
Commit 1281a5c90 rearranged the logic in this area rather drastically,
and it broke the case of adding a foreign key constraint in the same
ALTER that adds the pkey or unique constraint it depends on. While
self-referential fkeys are surely a pretty niche case, this used to
work so we shouldn't break it.
To fix, reorganize the scheduling rules in ATParseTransformCmd so
that a transformed AT_AddConstraint subcommand will be delayed into
a later pass in all cases, not only when it's been spit out as a
side-effect of parsing some other command type.
Also tweak the logic so that we won't run ATParseTransformCmd twice
while doing this. It seems to work even without that, but it's
surely wasting cycles to do so.
Per bug #16589 from Jeremy Evans. Back-patch to v13 where the new
code was introduced.
Discussion: https://postgr.es/m/16589-31c8d981ca503896@postgresql.org
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
Commit 9d701e624f caused the regression test for EXPLAIN to fail on
the buildfarm member prion. This happened because of instability of
test output, i.e., in text format, whether "Planning:" line is output
varies depending on the system state.
This commit updated the regression test so that it ignores that
"Planning:" line to produce more stable test output and get rid of
the test failure.
Back-patch to v13.
Author: Fujii Masao
Discussion: https://postgr.es/m/1803897.1598021621@sss.pgh.pa.us
Commit ce77abe63c allowed EXPLAIN (BUFFERS) to report the information
on buffer usage during planning phase. However three issues were
reported regarding this feature.
(1) Previously, EXPLAIN option BUFFERS required ANALYZE. So the query
had to be actually executed by specifying ANALYZE even when we
want to see only the planner's buffer usage. This was inconvenient
especially when the query was write one like DELETE.
(2) EXPLAIN included the planner's buffer usage in summary
information. So SUMMARY option had to be enabled to report that.
Also this format was confusing.
(3) The output structure for planning information was not consistent
between TEXT format and the others. For example, "Planning" tag
was output in JSON format, but not in TEXT format.
For (1), this commit allows us to perform EXPLAIN (BUFFERS) without
ANALYZE to report the planner's buffer usage.
For (2), this commit changed EXPLAIN output so that the planner's
buffer usage is reported before summary information.
For (3), this commit made the output structure for planning
information more consistent between the formats.
Back-patch to v13 where the planner's buffer usage was allowed to
be reported in EXPLAIN.
Reported-by: Pierre Giraud, David Rowley
Author: Fujii Masao
Reviewed-by: David Rowley, Julien Rouhaud, Pierre Giraud
Discussion: https://postgr.es/m/07b226e6-fa49-687f-b110-b7c37572f69e@dalibo.com
When the leftover invalid index is "ccold", there's no need to re-run
the command. Reword the instructions to make that explicit.
Backpatch to 12, where REINDEX CONCURRENTLY appeared.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/20200819211312.GA15497@alvherre.pgsql
Commit a477bfc1d fixed eval_const_expressions() to ensure that it
didn't generate unnecessary RelabelType nodes, but I failed to notice
that some other places in the planner had the same issue. Really
noplace in the planner should be using plain makeRelabelType(), for
fear of generating expressions that should be equal() to semantically
equivalent trees, but aren't.
An example is that because canonicalize_ec_expression() failed
to be careful about this, we could end up with an equivalence class
containing both a plain Const, and a Const-with-RelabelType
representing exactly the same value. So far as I can tell this led to
no visible misbehavior, but we did waste a bunch of cycles generating
and evaluating "Const = Const-with-RelabelType" to prove such entries
are redundant.
Hence, move the support function added by a477bfc1d to where it can
be more generally useful, and use it in the places where planner code
previously used makeRelabelType.
Back-patch to v12, like the previous patch. While I have no concrete
evidence of any real misbehavior here, it's certainly possible that
I overlooked a case where equivalent expressions that aren't equal()
could cause a user-visible problem. In any case carrying extra
RelabelType nodes through planning to execution isn't very desirable.
Discussion: https://postgr.es/m/1311836.1597781384@sss.pgh.pa.us
A number of client programs have a "--progress" option that when printing
to a TTY, updates the current line by printing a '\r' and overwriting it.
After the last line, '\n' needs to be printed to move the cursor to the
next line. pg_basebackup and pgbench got this right, but pg_rewind and
pg_checksums were slightly wrong. pg_rewind printed the newline to stdout
instead of stderr, and pg_checksums printed the newline even when not
printing to a TTY. Fix them, and also add a 'finished' argument to
pg_basebackup's progress_report() function, to keep it consistent with
the other programs.
Backpatch to v12. pg_rewind's newline was broken with the logging changes
in commit cc8d415117 in v12, and pg_checksums was introduced in v12.
Discussion: https://www.postgresql.org/message-id/82b539e5-ae33-34b0-1aee-22b3379fd3eb@iki.fi
Put the -r option in the right section (it certainly isn't an
option controlling "the location and format of the output").
Clarify the behavior of the tablespace and waldir options
(that part per gripe from robert@interactive.co.uk).
Make a large number of small copy-editing fixes in text that
visibly wasn't written by native speakers, and try to avoid
grammatical inconsistencies between the descriptions of
the different options.
Back-patch to v13, since HEAD hasn't meaningfully diverged yet.
Discussion: https://postgr.es/m/159749418850.14322.216503677134569752@wrigleys.postgresql.org
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
Parallel-restoring a foreign key that references a partitioned table
with several levels of partitions can fail:
pg_restore: while PROCESSING TOC:
pg_restore: from TOC entry 6684; 2606 29166 FK CONSTRAINT fk fk_a_fkey postgres
pg_restore: error: could not execute query: ERROR: there is no unique constraint matching given keys for referenced table "pk"
Command was: ALTER TABLE fkpart3.fk
ADD CONSTRAINT fk_a_fkey FOREIGN KEY (a) REFERENCES fkpart3.pk(a);
This happens in parallel restore mode because some index partitions
aren't yet attached to the topmost partitioned index that the FK uses,
and so the index is still invalid. The current code marks the FK as
dependent on the first level of index-attach dump objects; the bug is
fixed by recursively marking the FK on their children.
Backpatch to 12, where FKs to partitioned tables were introduced.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3170626.1594842723@sss.pgh.pa.us
Backpatch: 12-master
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Make these examples self-contained by providing declarations of the
user-defined row types they rely on. There wasn't room to do this
in the old doc format, but now there is, and I think it makes the
examples a good bit less confusing.
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
If a page range is desummarized at just the right time concurrently with
an index walk, BRIN would raise an error indicating index corruption.
This is scary and unhelpful; silently returning that the page range is
not summarized is sufficient reaction.
This bug was introduced by commit 975ad4e602ff as additional protection
against a bug whose actual fix was elsewhere. Backpatch equally.
Reported-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/2588667e-d07d-7e10-74e2-7e1e46194491@postgrespro.ru
Backpatch: 9.5 - master
