Based on a patch by Michael Paquier.
For libpq, use PQExpBuffer instead of StringInfo. This requires us to
track allocation failures so that we can return JSON_OUT_OF_MEMORY as
needed rather than exit()ing.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
The first part of the assertion verifying that the passed index must be PK
or RI was incorrectly passing index relation instead of heap relation in
GetRelationIdentityOrPK(). The assertion was not failing because the
second part of the assertion which needs to be performed only when remote
relation has REPLICA_IDENTITY_FULL set was also incorrect.
The change is not backpatched because the current coding doesn't lead to
any failure.
Reported-by: Dilip Kumar
Author: Amit Kapila
Reviewed-by: Vignesh C
Discussion: https://postgr.es/m/CAFiTN-tmguaT1DXbCC+ZomZg-oZLmU6BPhr0po7akQSG6vNJrg@mail.gmail.com
Commit 8004953b5 added a hash table to avoid O(N^2) cost in choosing
unique relation aliases while deparsing a view or rule. It did
nothing about the similar O(N^2) (maybe worse) costs of choosing
unique column aliases within each RTE. However, that's now
demonstrably a bottleneck when deparsing CHECK constraints for wide
tables, so let's use a similar hash table to handle those.
The extra cost of setting up the hash table will not be repaid unless
the table has many columns. I've set this up so that we use the brute
force method if there are less than 32 columns. The exact cutoff is
not too critical, but this value seems good because it results in both
code paths getting exercised by existing regression-test cases.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/2885468.1722291250@sss.pgh.pa.us
We must drop whitespace while parsing the input, else libxml2
will include "blank" nodes that interfere with the desired
indentation behavior. The end result is that we didn't indent
nodes separated by whitespace.
Also, it seems that libxml2 may add a trailing newline when working
in DOCUMENT mode. This is semantically insignificant, so strip it.
This is in the gray area between being a bug fix and a definition
change. However, the INDENT option is still pretty new (since v16),
so I think we can get away with changing this in stable branches.
Hence, back-patch to v16.
Jim Jones
Discussion: https://postgr.es/m/872865a8-548b-48e1-bfcd-4e38e672c1e4@uni-muenster.de
Point out that the output format depends on DateStyle, and test that,
along with testing some cases previously not covered.
In passing, adjust the horology test to verify that the prevailing
DateStyle is 'Postgres, MDY', much as it has long verified the
prevailing TimeZone. We expect pg_regress to have set these up,
and there are multiple regression tests relying on these settings.
Also make the formatting of entries in table 9.50 more consistent.
David Wheeler (marginal additional hacking by me); review by jian he
Discussion: https://postgr.es/m/56955B33-6959-4FDA-A459-F00363ECDFEE@justatheory.com
The environment variable PG_TEST_PG_COMBINEBACKUP_MODE has been
available since 35a7b288b9, but was not set by any built-in CI tasks.
This commit modifies two of the CI tasks to use the alternative modes,
to exercise the pg_combinebackup code.
The Linux task uses --copy-file-range, macOS uses --clone.
This is not an exhaustive test of combinations. The supported modes
depend on the operating system and filesystem, and it would be nice to
test all supported combinations. Right now we have just one task for
each OS, and it doesn't seem worth adding more just for this.
Reported-by: Peter Eisentraut
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/48da4a1f-ccd9-4988-9622-24f37b1de2b4%40eisentraut.org
In case of torn UTF8 in the input data we might end up going
past the end of the string since we don't account for length.
While validation won't be performed on a sequence with a NULL
byte it's better to avoid going past the end to beging with.
Fix by taking the length into consideration.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAOYmi+mTnmM172g=_+Yvc47hzzeAsYPy2C4UBY3HK9p-AXNV0g@mail.gmail.com
The only current implementation is for btree where it calls
_bt_getrootheight(). Other index types can now also use this to pass
information to their amcostestimate routine. Previously, btree was
hardcoded and other index types could not hook into the optimizer at
this point.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
When generating window_pathkeys, distinct_pathkeys, or sort_pathkeys,
we failed to realize that the grouping/ordering expressions might be
nullable by grouping sets. As a result, we may incorrectly deem that
the PathKeys are redundant by EquivalenceClass processing and thus
remove them from the pathkeys list. That would lead to wrong results
in some cases.
To fix this issue, we mark the grouping expressions nullable by
grouping sets if that is the case. If the grouping expression is a
Var or PlaceHolderVar or constructed from those, we can just add the
RT index of the RTE_GROUP RTE to the existing nullingrels field(s);
otherwise we have to add a PlaceHolderVar to carry on the nullingrel
bit.
However, we have to manually remove this nullingrel bit from
expressions in various cases where these expressions are logically
below the grouping step, such as when we generate groupClause pathkeys
for grouping sets, or when we generate PathTarget for initial input to
grouping nodes.
Furthermore, in set_upper_references, the targetlist and quals of an
Agg node should have nullingrels that include the effects of the
grouping step, ie they will have nullingrels equal to the input
Vars/PHVs' nullingrels plus the nullingrel bit that references the
grouping RTE. In order to perform exact nullingrels matches, we also
need to manually remove this nullingrel bit.
Bump catversion because this changes the querytree produced by the
parser.
Thanks to Tom Lane for the idea to invent a new kind of RTE.
Per reports from Geoff Winkless, Tobias Wendorff, Richard Guo from
various threads.
Author: Richard Guo
Reviewed-by: Ashutosh Bapat, Sutou Kouhei
Discussion: https://postgr.es/m/CAMbWs4_dp7e7oTwaiZeBX8+P1rXw4ThkZxh1QG81rhu9Z47VsQ@mail.gmail.com
If there are subqueries in the grouping expressions, each of these
subqueries in the targetlist and HAVING clause is expanded into
distinct SubPlan nodes. As a result, only one of these SubPlan nodes
would be converted to reference to the grouping key column output by
the Agg node; others would have to get evaluated afresh. This is not
efficient, and with grouping sets this can cause wrong results issues
in cases where they should go to NULL because they are from the wrong
grouping set. Furthermore, during re-evaluation, these SubPlan nodes
might use nulled column values from grouping sets, which is not
correct.
This issue is not limited to subqueries. For other types of
expressions that are part of grouping items, if they are transformed
into another form during preprocessing, they may fail to match lower
target items. This can also lead to wrong results with grouping sets.
To fix this issue, we introduce a new kind of RTE representing the
output of the grouping step, with columns that are the Vars or
expressions being grouped on. In the parser, we replace the grouping
expressions in the targetlist and HAVING clause with Vars referencing
this new RTE, so that the output of the parser directly expresses the
semantic requirement that the grouping expressions be gotten from the
grouping output rather than computed some other way. In the planner,
we first preprocess all the columns of this new RTE and then replace
any Vars in the targetlist and HAVING clause that reference this new
RTE with the underlying grouping expressions, so that we will have
only one instance of a SubPlan node for each subquery contained in the
grouping expressions.
Bump catversion because this changes the querytree produced by the
parser.
Thanks to Tom Lane for the idea to invent a new kind of RTE.
Per reports from Geoff Winkless, Tobias Wendorff, Richard Guo from
various threads.
Author: Richard Guo
Reviewed-by: Ashutosh Bapat, Sutou Kouhei
Discussion: https://postgr.es/m/CAMbWs4_dp7e7oTwaiZeBX8+P1rXw4ThkZxh1QG81rhu9Z47VsQ@mail.gmail.com
This change makes the code slightly easier to reason about, because
there is actually no need to know if a specific caller of one of these
routines should fail hard on a PANIC, or just let it go through with a
DEBUG2.
The only caller of XLogFileReadAnyTLI() used DEBUG2, and XLogFileRead()
has never used its emode. This can be simplified since 1bb2558046
that has introduced XLogFileReadAnyTLI(), splitting both.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20240906201043.a640f3b44e755d4db2b6943e@sraoss.co.jp
This change adds WAL usage reporting to the output of ANALYZE VERBOSE
and autoanalyze reports. It aligns the analyze output with VACUUM,
providing consistency. Additionally, it aids in troubleshooting cases
where WAL records are generated during analyze operations.
Author: Anthonin Bonnefoy
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAO6_Xqr__kTTCLkftqS0qSCm-J7_xbRG3Ge2rWhucxQJMJhcRA%40mail.gmail.com
Previously this code used PageGetHeapFreeSpace on heap pages,
and usually used PageGetFreeSpace on index pages (though for some
reason GetHashPageStats used PageGetExactFreeSpace instead).
The difference is that those functions subtract off the size of
a line pointer, and PageGetHeapFreeSpace has some additional
rules about returning zero if adding another line pointer would
require exceeding MaxHeapTuplesPerPage. Those things make sense
when testing to see if a new tuple can be put on the page, but
they seem pretty strange for pure statistics collection.
Additionally, statapprox_heap had a special rule about counting
a "new" page as being fully available space. This also seems
strange, because it's not actually usable until VACUUM or some
such process initializes the page. Moreover, it's inconsistent
with what pgstat_heap does, which is to count such a page as
having zero free space. So make it work like pgstat_heap, which
as of this patch unconditionally calls PageGetExactFreeSpace.
This is more of a definitional change than a bug fix, so no
back-patch. The module's documentation doesn't define exactly
what "free space" means either, so we left that as-is.
Frédéric Yhuel, reviewed by Rafia Sabih and Andreas Karlsson.
Discussion: https://postgr.es/m/3a18f843-76f6-4a84-8cca-49537fefa15d@dalibo.com
SPI_connect/SPI_connect_ext have not returned any value other than
SPI_OK_CONNECT since commit 1833f1a1c in v10; any errors are thrown
via ereport. (The most likely failure is out-of-memory, which has
always been thrown that way, so callers had better be prepared for
such errors.) This makes it somewhat pointless to check these
functions' result, and some callers within our code haven't been
bothering; indeed, the only usage example within spi.sgml doesn't
bother. So it's likely that the omission has propagated into
extensions too.
Hence, let's standardize on not checking, and document the return
value as historical, while not actually changing these functions'
behavior. (The original proposal was to change their return type
to "void", but that would needlessly break extensions that are
conforming to the old practice.) This saves a small amount of
boilerplate code in a lot of places.
Stepan Neretin
Discussion: https://postgr.es/m/CAMaYL5Z9Uk8cD9qGz9QaZ2UBJFOu7jFx5Mwbznz-1tBbPDQZow@mail.gmail.com
The existing function PQprotocolVersion() does not include the minor
version of the protocol. In preparation for pending work that will
bump that number for the first time, add a new function to provide it
to clients that may care, using the (major * 10000 + minor)
convention already used by PQserverVersion().
Jacob Champion based on earlier work by Jelte Fennema-Nio
Discussion: http://postgr.es/m/CAOYmi+mM8+6Swt1k7XsLcichJv8xdhPnuNv7-02zJWsezuDL+g@mail.gmail.com
As introduced by f9900df5f9, a REINDEX CONCURRENTLY job done for an
index with predicates or expressions would set PROC_IN_SAFE_IC in its
MyProc->statusFlags, causing it to be ignored by other concurrent
operations.
Such concurrent index rebuilds should never be ignored, as a predicate
or an expression could call a user-defined function that accesses a
different table than the table where the index is rebuilt.
A test that uses injection points is added, backpatched down to 17.
Michail has proposed a different test, but I have added something
simpler with more coverage.
Oversight in f9900df5f9.
Author: Michail Nikolaev
Discussion: https://postgr.es/m/CANtu0oj9A3kZVduFTG0vrmGnKB+DCHgEpzOp0qAyOgmks84j0w@mail.gmail.com
Backpatch-through: 14
When the ON ERROR / ON EMPTY behavior is to return NULL, returning
NULL directly from ExecEvalJsonExprPath() suffices. Therefore, there's
no need to create separate steps to check the error/empty flag or
those to evaluate the the constant NULL expression. This speeds up
common cases because the default ON ERROR / ON EMPTY behavior for
JSON_QUERY() and JSON_VALUE() is to return NULL. However, these steps
are necessary if the RETURNING type is a domain, as constraints on the
domain may need to be checked.
Reported-by: Jian He <jian.universality@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
In label_sort_with_costsize, the cost_sort function is called with the
parameters 'input_disabled_nodes' and 'input_cost' in the wrong order.
This does not cause any plan diffs in the regression tests, because
label_sort_with_costsize is only used to label the Sort node nicely
for EXPLAIN, and cost numbers are not displayed in regression tests.
Oversight in e22253467. Fixed by passing arguments in the right
order.
Per report from Alexander Lakhin running UBSan.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/a9b7231d-68bc-f117-a07c-96688f3e6aef@gmail.com
This commit adds two callbacks in pgstats to have a better control of
the flush timing of pgstat_report_stat(), whose operation depends on the
three PGSTAT_*_INTERVAL variables:
- have_fixed_pending_cb(), to check if a stats kind has any pending
data waiting for a flush. This is used as a fast path if there are no
pending statistics to flush, and this check is done for fixed-numbered
statistics only if there are no variable-numbered statistics to flush.
A flush will need to happen if at least one callback reports any pending
data.
- flush_fixed_cb(), to do the actual flush.
These callbacks are currently used by the SLRU, WAL and IO statistics,
generalizing the concept for all stats kinds (builtin and custom).
The SLRU and IO stats relied each on one global variable to determine
whether a flush should happen; these are now local to pgstat_slru.c and
pgstat_io.c, cleaning up a bit how the pending flush states are tracked
in pgstat.c.
pgstat_flush_io() and pgstat_flush_wal() are still required, but we do
not need to check their return result anymore.
Reviewed-by: Bertrand Drouvot, Kyotaro Horiguchi
Discussion: https://postgr.es/m/ZtaVO0N-aTwiAk3w@paquier.xyz
Looking up a nonexistent user ID would lead to a null pointer
dereference. That's unlikely to happen here, but perhaps
not impossible.
Thinko in commit 4d5111b3f, noticed by Coverity.
The following routines are changed to use the syscache entries added for
pg_extension in 490f869d92e5:
- get_extension_oid()
- get_extension_name()
- get_extension_schema()
A catalog scan is costly and could easily lead to a noticeable
performance impact when called once or more per query, so this is going
to be helpful for developers for extension data lookups.
Author: Andrei Lepikhov
Reviewed-by: Jelte Fennema-Nio
Discussion: https://postgr.es/m/529295b2-6ba9-4dae-acd1-20a9c6fb8f9a@gmail.com
Instead always fetch the locale and look at the ctype_is_c field.
hba.c relies on regexes working for the C locale without needing
catalog access, which worked before due to a special case for
C_COLLATION_OID in lc_ctype_is_c(). Move the special case to
pg_set_regex_collation() now that lc_ctype_is_c() is gone.
Author: Andreas Karlsson
Discussion: https://postgr.es/m/60929555-4709-40a7-b136-bcb44cff5a3c@proxel.se
pg_stat_get_io() applied TimestampTzGetDatum twice to the
stat_reset_timestamp value. On 64-bit builds that's harmless because
TimestampTzGetDatum is a no-op, but on 32-bit builds it results in
displaying garbage in the stats_reset column of the pg_stat_io view.
Bug dates to commit a9c70b46d which introduced pg_stat_io, so
back-patch to v16 where that came in.
Bertrand Drouvot
Discussion: https://postgr.es/m/Ztrd+XcPTz1zorkg@ip-10-97-1-34.eu-west-3.compute.internal
Digging into the history, this was not necessary even when it was
added, but might have been some time before that. In any case, there
is no use for this now.
Use EMPTY ARRAY instead of EMPTY.
This change does not affect the runtime behavior of JSON_TABLE(),
which continues to return an empty relation ON ERROR. It only alters
whether the default ON ERROR behavior is shown in the deparsed output.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
The deparsing code in get_json_expr_options() unnecessarily emitted
the default column-specific ON ERROR / EMPTY behavior when the
top-level ON ERROR behavior in JSON_TABLE was set to ERROR. Fix that
by not overriding the column-specific default, determined based on
the column's JsonExprOp in get_json_table_columns(), with
JSON_BEHAVIOR_ERROR when that is the top-level ON ERROR behavior.
Note that this only removes redundancy; the current deparsing output
is not incorrect, just redundant.
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
When the ON ERROR / ON EMPTY behavior is to return NULL, returning
NULL directly from ExecEvalJsonExprPath() suffices. Therefore, there's
no need to create separate steps to check the error/empty flag or
those to evaluate the the constant NULL expression. This speeds up
common cases because the default ON ERROR / ON EMPTY behavior for
JSON_QUERY() and JSON_VALUE() is to return NULL. However, these steps
are necessary if the RETURNING type is a domain, as constraints on the
domain may need to be checked.
Reported-by: Jian He <jian.universality@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
Use EMPTY ARRAY instead of EMPTY.
This change does not affect the runtime behavior of JSON_TABLE(),
which continues to return an empty relation ON ERROR. It only alters
whether the default ON ERROR behavior is shown in the deparsed output.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
The deparsing code in get_json_expr_options() unnecessarily emitted
the default column-specific ON ERROR / EMPTY behavior when the
top-level ON ERROR behavior in JSON_TABLE was set to ERROR. Fix that
by not overriding the column-specific default, determined based on
the column's JsonExprOp in get_json_table_columns(), with
JSON_BEHAVIOR_ERROR when that is the top-level ON ERROR behavior.
Note that this only removes redundancy; the current deparsing output
is not incorrect, just redundant.
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
Set global variables after error paths so that they don't end up in an
inconsistent state.
The inconsistent state doesn't lead to an actual problem, because
after an error, pg_set_regex_collation() will be called again before
the globals are accessed.
Change extracted from patch by Andreas Karlsson, though not discussed
explicitly.
Discussion: https://postgr.es/m/60929555-4709-40a7-b136-bcb44cff5a3c@proxel.se
Since commit 2549f0661, we reject an identifier immediately following
a numeric literal (without separating whitespace), because that risks
ambiguity with hex/octal/binary integers. However, that patch used
token patterns like "{integer}{ident_start}", which is problematic
because {ident_start} matches only a single byte. If the first
character after the integer is a multibyte character, this ends up
with flex reporting an error message that includes a partial multibyte
character. That can cause assorted bad-encoding problems downstream,
both in the report to the client and in the postmaster log file.
To fix, use {identifier} not {ident_start} in the "junk" token
patterns, so that they will match complete multibyte characters.
This seems generally better user experience quite aside from the
encoding problem: for "123abc" the error message will now say that
the error appeared at or near "123abc" instead of "123a".
While at it, add some commentary about why these patterns exist
and how they work.
Report and patch by Karina Litskevich; review by Pavel Borisov.
Back-patch to v15 where the problem came in.
Discussion: https://postgr.es/m/CACiT8iZ_diop=0zJ7zuY3BXegJpkKK1Av-PU7xh0EDYHsa5+=g@mail.gmail.com
Commit 6ebeeae29 accidentally omitted testing the return value from
findTypeByOid which can return NULL. Fix by adding a check to make
sure that we have a pointer to dereference.
Author: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAEudQAqfMTH8Ya_J6E-NW_y_JyDFDxtQ4V_g6nY_1=0oDbQqdg@mail.gmail.com
pgstat_initialize() is currently used by the WAL stats as a code path to
take some custom actions when a backend starts. A callback is added to
generalize the concept so as all stats kinds can do the same, for
builtin and custom kinds, if set.
Reviewed-by: Bertrand Drouvot, Kyotaro Horiguchi
Discussion: https://postgr.es/m/ZtZr1K4PLdeWclXY@paquier.xyz
There were two spots in pgstat_read_statsfile() where is was possible to
finish with a null-pointer-dereference crash for custom pgstats kinds:
- When reading stats for a fixed-numbered stats entry.
- When reading a variable stats entry with name serialization.
For both cases, these issues were reachable by starting a server after
changing shared_preload_libraries so as the stats written previously
could not be loaded.
The code is changed so as the stats are ignored in this case, like the
other code paths doing similar sanity checks. Two WARNINGs are added to
be able to debug these issues. A test is added for the case of
fixed-numbered stats with the module injection_points.
Oversights in 7949d95945, spotted while looking at a different report.
Discussion: https://postgr.es/m/Ztj0Jftsn4xXuXtl@paquier.xyz
This fixes defects with installcheck for TAP tests that expect the
module injection_points to exist in an installation, but the contents of
src/test/modules are not installed by default with installcheck. This
would cause, for example, failures under installcheck-world for a build
with injection points enabled, when the contents of src/test/modules/
are not installed.
The availability of the module can be done with a scan of
pg_available_extension. This has been introduced in 2cdcae9da6, and
it is refactored here as a new routine in Cluster.pm.
Tests are changed in different ways depending on what they need:
- The libpq TAP test sets up a node even without injection points, so it
is enough to check that CREATE EXTENSION can be used. There is no need
for the variable enable_injection_points.
- In test_misc, 006_signal_autovacuum requires a runtime check.
- 041_checkpoint_at_promote in recovery tests and 005_timeouts in
test_misc are updated to use the routine introduced in Cluster.pm.
- test_slru's 001_multixact, injection_points's 001_stats and
modules/gin/ do not require a check as these modules disable
installcheck entirely.
Discussion: https://postgr.es/m/ZtesYQ-WupeAK7xK@paquier.xyz
When WindowAgg finished one partition of a PARTITION BY, it previously
would call tuplestore_end() to purge all the stored tuples before again
calling tuplestore_begin_heap() and carefully setting up all of the
tuplestore read pointers exactly as required for the given frameOptions.
Since the frameOptions don't change between partitions, this part does
not make much sense. For queries that had very few rows per partition,
the overhead of this was very large.
It seems much better to create the tuplestore and the read pointers once
and simply call tuplestore_clear() at the end of each partition.
tuplestore_clear() moves all of the read pointers back to the start
position and deletes all the previously stored tuples.
A simple test query with 1 million partitions and 1 tuple per partition
has been shown to run around 40% faster than without this change. The
additional effort seems to have mostly been spent in malloc/free.
Making this work required adding a new bool field to WindowAggState
which had the unfortunate effect of being the 9th bool field in a group
resulting in the struct being enlarged. Here we shuffle the fields
around a little so that the two bool fields for runcondition relating
stuff fit into existing padding. Also, move the "runcondition" field to
be near those. This frees up enough space with the other bool fields so
that the newly added one fits into the padding bytes. This was done to
address a very small but apparent performance regression with queries
containing a large number of rows per partition.
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Discussion: https://postgr.es/m/CAHoyFK9n-QCXKTUWT_xxtXninSMEv%2BgbJN66-y6prM3f4WkEHw%40mail.gmail.com
The code to calculate the frame offsets is only performed once per scan.
Moving this code out of line gives a small (around 4-5%) speedup when testing
with some CPUs. Other tested CPUs are indifferent to the change.
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Discussion: https://postgr.es/m/CAApHDvqPgFtwme2Zyf75BpMLwYr2mnUstDyPiP%3DEpudYuQTPPQ%40mail.gmail.com
This reverts some hacks added in d33a81203 and cd69ec66c.
At the time the concern was the already-ancient version of
libedit shipped in Debian 10 (Buster). That platform is
now two years past EOL, so desupporting it for PG 18 seems
fine. (Also, if anyone is really hot to keep testing it,
they can use SKIP_READLINE_TESTS to skip this test.)
We might have to reconsider if any animals still in the
buildfarm don't like this, but the best way to find out
is to try it.
Anton Melnikov
Discussion: https://postgr.es/m/CAGRrpzZU48F2oV3d8eDLr=4TU9xFH5Jt9ED+qU1+X91gMH68Sw@mail.gmail.com
Change to using %m in the error message string. We need to be a bit
careful here to preserve errno until we need to print it.
This change avoids the use of not-thread-safe strerror() and unifies
some error message strings, and maybe makes the code appear more
consistent.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/daa87d79-c044-46c4-8458-8d77241ed7b0%40eisentraut.org
This commit adds columns in view pg_stat_subscription_stats to show the
number of times a particular conflict type has occurred during the
application of logical replication changes. The following columns are
added:
confl_insert_exists:
Number of times a row insertion violated a NOT DEFERRABLE unique
constraint.
confl_update_origin_differs:
Number of times an update was performed on a row that was
previously modified by another origin.
confl_update_exists:
Number of times that the updated value of a row violates a
NOT DEFERRABLE unique constraint.
confl_update_missing:
Number of times that the tuple to be updated is missing.
confl_delete_origin_differs:
Number of times a delete was performed on a row that was
previously modified by another origin.
confl_delete_missing:
Number of times that the tuple to be deleted is missing.
The update_origin_differs and delete_origin_differs conflicts can be
detected only when track_commit_timestamp is enabled.
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Peter Smith, Anit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57160A07BD575773045FC214948F2@OS0PR01MB5716.jpnprd01.prod.outlook.com
When generating paths for the ORDER BY clause, one thing we need to
ensure is that the output paths project the correct final_target. To
achieve this, in create_ordered_paths, we compare the pathtarget of
each generated path with the given 'target', and add a post-sort
projection step if the two targets do not match.
Currently we perform a simple pointer comparison between the two
targets. It turns out that this is not sufficient. Each sorted_path
generated in create_ordered_paths initially projects the correct
target required by the preceding steps of sort. If it is the same
pointer as sort_input_target, pointer comparison suffices, because
sort_input_target is always identical to final_target when no
post-sort projection is needed.
However, sorted_path's initial pathtarget may not be the same pointer
as sort_input_target, because in apply_scanjoin_target_to_paths, if
the target to be applied has the same expressions as the existing
reltarget, we only inject the sortgroupref info into the existing
pathtargets, rather than create new projection paths. As a result,
pointer comparison in create_ordered_paths is not reliable.
Instead, we can compare PathTarget.exprs to determine whether a
projection step is needed. If the expressions match, we can be
confident that a post-sort projection is not required.
It could be argued that this change adds extra check cost each time we
decide whether a post-sort projection is needed. However, as
explained in apply_scanjoin_target_to_paths, by avoiding the creation
of projection paths, we save effort both immediately and at plan
creation time. This, I think, justifies the extra check cost.
There are two ensuing plan changes in the regression tests, but they
look reasonable and are exactly what we are fixing here. So no
additional test cases are added.
No backpatch as this could result in plan changes.
Author: Richard Guo
Reviewed-by: Peter Eisentraut, David Rowley, Tom Lane
Discussion: https://postgr.es/m/CAMbWs48TosSvmnz88663_2yg3hfeOFss-J2PtnENDH6J_rLnRQ@mail.gmail.com
Peter Eisentraut