foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
This corrects a small bug in zic that caused it to output an incorrect
year-2440 transition in the Africa/Casablanca zone.
More interestingly, zic has grown a "-r" option that limits the range of
zone transitions that it will put into the output files. That might be
useful to people who don't like the weird GMT offsets that tzdb likes
to use for very old dates. It appears that for dates before the cutoff
time specified with -r, zic will use the zone's standard-time offset
as of the cutoff time. So for example one might do
make install ZIC_OPTIONS='-r @-1893456000'
to cause all dates before 1910-01-01 to be treated as though 1910
standard time prevailed indefinitely far back. (Don't blame me for
the unfriendly way of specifying the cutoff time --- it's seconds
since or before the Unix epoch. You can use extract(epoch ...)
to calculate it.)
As usual, back-patch to all supported branches.
DST law changes in Palestine and Metlakatla.
Historical corrections for Israel.
Etc/UCT is now a backward-compatibility link to Etc/UTC, instead
of being a separate zone that generates the abbreviation "UCT",
which nowadays is typically a typo. Postgres will still accept
"UCT" as an input zone name, but it won't output it.
Fix DefineIndex so that it doesn't attempt to pass down a to-be-reused
index relfilenode to a child index creation, and fix TryReuseIndex
to not think that reuse is sensible for a partitioned index.
In v11, this fixes a problem where ALTER TABLE on a partitioned table
could assign the same relfilenode to several different child indexes,
causing very nasty catalog corruption --- in fact, attempting to DROP
the partitioned table then leads not only to a database crash, but to
inability to restart because the same crash will recur during WAL replay.
Either of these two changes would be enough to prevent the failure, but
since neither action could possibly be sane, let's put in both changes
for future-proofing.
In HEAD, no such bug manifests, but that's just an accidental consequence
of having changed the pg_class representation of partitioned indexes to
have relfilenode = 0. Both of these changes still seem like smart
future-proofing.
This is only a stop-gap because the code for ALTER TABLE on a partitioned
table with a no-op type change still leaves a great deal to be desired.
As the added regression tests show, it gets things wrong for comments on
child indexes/constraints, and it is regenerating child indexes it doesn't
have to. However, fixing those problems will take more work which may not
get back-patched into v11. We need a fix for the corruption problem now.
Per bug #15672 from Jianing Yang.
Patch by me, regression test cases based on work by Amit Langote,
who also did a lot of the investigative work.
Discussion: https://postgr.es/m/15672-b9fa7db32698269f@postgresql.org
When an existing index in a partition is attached to a new index on
its parent, we forgot to set the "relispartition" flag correctly, which
meant that it was not possible to find the index in various operations,
such as adding a foreign key constraint that references that partitioned
table. One of four places that was assigning the parent index was
forgetting to do that, so fix by shifting responsibility of updating the
flag to the routine that changes the parent.
Author: Amit Langote, Álvaro Herrera
Reported-by: Hubert "depesz" Lubaczewski
Discussion: https://postgr.es/m/CA+HiwqHMsRtRYRWYTWavKJ8x14AFsv7bmAV46mYwnfD3vy8goQ@mail.gmail.com
Using PARTITION OF can result in column ordering being changed from the
database being dumped, if the partition uses a column layout different
from the parent's. It's not pg_dump's job to editorialize on table
definitions, so this is not acceptable; back-patch all the way back to
pg10, where partitioned tables where introduced.
This change also ensures that partitions end up in the correct
tablespace, if different from the parent's; this is an oversight in
ca4103025dfe (in pg12 only). Partitioned indexes (in pg11) don't have
this problem, because they're already created as independent indexes and
attached to their parents afterwards.
This change also has the advantage that the partition is restorable from
the dump (as a standalone table) even if its parent table isn't
restored.
Author: David Rowley
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f_1c260nOt_vBJ067AZ3JXptXVRohDVMLEBmudX1YEx-A@mail.gmail.com
Discussion: https://postgr.es/m/20190423185007.GA27954@alvherre.pgsql
In sigusr1_handler, don't ignore PMSIGNAL_ADVANCE_STATE_MACHINE based
on pmState. The restriction is unnecessary (PostmasterStateMachine
should work in any state), not future-proof (since it makes too many
assumptions about why the signal might be sent), and broken even today
because a race condition can make it necessary to respond to the signal
in PM_WAIT_READONLY state. The race condition seems unlikely, but
if it did happen, a hot-standby postmaster could fail to shut down
after receiving a smart-shutdown request.
In MaybeStartWalReceiver, don't clear the WalReceiverRequested flag
if the fork attempt fails. Leaving it set allows us to try
again in future iterations of the postmaster idle loop. (The startup
process would eventually send a fresh request signal, but this change
may allow us to retry the fork sooner.)
Remove an obsolete comment and unnecessary test in
PostmasterStateMachine's handling of PM_SHUTDOWN_2 state. It's not
possible to have a live walreceiver in that state, and AFAICT has not
been possible since commit 5e85315ea. This isn't a live bug, but the
false comment is quite confusing to readers.
In passing, rearrange sigusr1_handler's CheckPromoteSignal tests so that
we don't uselessly perform stat() calls that we're going to ignore the
results of.
Add some comments clarifying the behavior of MaybeStartWalReceiver;
I very nearly rearranged it in a way that'd reintroduce the race
condition fixed in e5d494d78. Mea culpa for not commenting that
properly at the time.
Back-patch to all supported branches. The PMSIGNAL_ADVANCE_STATE_MACHINE
change is the only one of even minor significance, but we might as well
keep this code in sync across branches.
Discussion: https://postgr.es/m/9001.1556046681@sss.pgh.pa.us
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
cache_locale_time (extraction of LC_TIME-related info) had never been
taught the lessons we previously learned about extraction of info related
to LC_MONETARY and LC_NUMERIC. Specifically, commit 95a777c61 taught
PGLC_localeconv() that data coming out of localeconv() was in an encoding
determined by the relevant locale, but we didn't realize that there's a
similar issue with strftime(). And commit a4930e7ca hardened
PGLC_localeconv() against errors occurring partway through, but failed
to do likewise for cache_locale_time(). So, rearrange the latter
function to perform encoding conversion and not risk failure while
it's got the locales set to temporary values.
This time around I also changed PGLC_localeconv() to treat it as FATAL
if it can't restore the previous settings of the locale values. There
is no reason (except possibly OOM) for that to fail, and proceeding with
the wrong locale values seems like a seriously bad idea --- especially
on Windows where we have to also temporarily change LC_CTYPE. Also,
protect against the possibility that we can't identify the codeset
reported for LC_MONETARY or LC_NUMERIC; rather than just failing,
try to validate the data without conversion.
The user-visible symptom this fixes is that if LC_TIME is set to a locale
name that implies an encoding different from the database encoding,
non-ASCII localized day and month names would be retrieved in the wrong
encoding, leading to either unexpected encoding-conversion error reports
or wrong output from to_char(). The other possible failure modes are
unlikely enough that we've not seen reports of them, AFAIK.
The encoding conversion problems do not manifest on Windows, since
we'd already created special-case code to handle that issue there.
Per report from Juan José Santamaría Flecha. Back-patch to all
supported versions.
Juan José Santamaría Flecha and Tom Lane
Discussion: https://postgr.es/m/CAC+AXB22So5aZm2vZe+MChYXec7gWfr-n-SK-iO091R0P_1Tew@mail.gmail.com
This commit fixes a couple of issues related to the way password
verifiers hashed with MD5 or SCRAM-SHA-256 are detected, leading to
being able to store in catalogs passwords which do not follow the
supported hash formats:
- A MD5-hashed entry was checked based on if its header uses "md5" and
if the string length matches what is expected. Unfortunately the code
never checked if the hash only used hexadecimal characters, as reported
by Tom Lane.
- A SCRAM-hashed entry was checked based on only its header, which
should be "SCRAM-SHA-256$", but it never checked for any fields
afterwards, as reported by Jonathan Katz.
Backpatch down to v10, which is where SCRAM has been introduced, and
where password verifiers in plain format have been removed.
Author: Jonathan Katz
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/016deb6b-1f0a-8e9f-1833-a8675b170aa9@postgresql.org
Backpatch-through: 10
This commit adds the description that "non-exclusive" pg_start_backup
and pg_stop_backup can be executed even during recovery. Previously
it was wrongly documented that those functions are not allowed to be
executed during recovery.
Back-patch to 9.6 where non-exclusive backup API was added.
Discussion: https://postgr.es/m/CAHGQGwEuAYrEX7Yhmf2MCrTK81HDkkg-JqsOUh8zw6+zYC5zzw@mail.gmail.com
HoldPinnedPortals() did things in the wrong order: it must not mark
a portal autoHeld until it's been successfully held. Otherwise,
a failure while persisting the portal results in a server crash
because we think the portal is in a good state when it's not.
Also add a check that portal->status is READY before attempting to
hold a pinned portal. We have such a check before the only other
use of HoldPortal(), so it seems unwise not to check it here.
Lastly, rethink the responsibility for where to call HoldPinnedPortals.
The comment for it imagined that it was optional for any individual PL
to call it or not, but that cannot be the case: if some outer level of
procedure has a pinned portal, failing to persist it when an inner
procedure commits is going to be trouble. Let's have SPI do it instead
of the individual PLs. That's not a complete solution, since in theory
a PL might not be using SPI to perform commit/rollback, but such a PL
is going to have to be aware of lots of related requirements anyway.
(This change doesn't cause an API break for any external PLs that might
be calling HoldPinnedPortals per the old regime, because calling it
twice during a commit or rollback sequence won't hurt.)
Per bug #15703 from Julian Schauder. Back-patch to v11 where this code
came in.
Discussion: https://postgr.es/m/15703-c12c5bc0ea34ba26@postgresql.org
If a FOR ALL TABLES publication exists, temporary and unlogged tables
are ignored for publishing changes. But CheckCmdReplicaIdentity()
would still check in that case that such a table has a replica
identity set before accepting updates. To fix, have
GetRelationPublicationActions() return that such a table publishes no
actions.
Discussion: https://www.postgresql.org/message-id/f3f151f7-c4dd-1646-b998-f60bd6217dd3@2ndquadrant.com
Previously, include actions include_dir, include_if_exists, and include
listed commented-out values which were not the defaults, which is
inconsistent with other entries. Instead, replace them with '', which
is the default value.
Reported-by: Emanuel Araújo
Discussion: https://postgr.es/m/CAMuTAkYMx6Q27wpELDR3_v9aG443y7ZjeXu15_+1nGUjhMWOJA@mail.gmail.com
Backpatch-through: 9.4
The buildfarm points out that UINT64_FORMAT might not work with sscanf;
it's calibrated for our printf implementation, which might not agree
with the platform-supplied sscanf. Fall back to just accepting an
unsigned long, which is already more than the documentation promises.
Oversight in e6c3ba7fb; back-patch to v11, as that was.
Since Postgres 10, SHOW commands can be triggered with replication
connections in a WAL sender context, however it missed that a
transaction context is needed for syscache lookups. This commit makes
sure that the syscache lookups can happen correctly by setting a
transaction context when running SHOW commands in a WAL sender.
Superuser-only parameters can be displayed using SHOW commands not only
to superusers, but also to members of system role pg_read_all_settings,
which requires a syscache lookup to check if the connected role is a
member of this system role or not, or the instance crashes. Superusers
do not need to check the syscache so it worked correctly in this case.
New tests are added to cover this issue.
Reported-by: Alexander Kukushkin
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/15734-2daa8761eeed8e20@postgresql.org
Backpatch-through: 10
Commit c098509927f9a49ebceb301a2cb6a477ecd4ac3c changed
PostgresNode::get_new_node() to probe 0.0.0.0 instead of 127.0.0.1, but
the new test was less effective for Windows native Perl. This increased
the failure rate of buildfarm members bowerbird and jacana. Instead,
test 0.0.0.0 and concrete addresses. This restores the old level of
defense, but the algorithm is still subject to its longstanding time of
check to time of use race condition. Back-patch to 9.6, like the
previous change.
Discussion: https://postgr.es/m/GrdLgAdUK9FdyZg8VIcTDKVOkys122ZINEb3CjjoySfGj2KyPiMKTh1zqtRp0TAD7FJ27G-OBB3eplxIB5GhcQH5o8zzGZfp0MuJaXJxVxk=@yesql.se
The original coding of generate_partition_qual() just copied the list
of predicate expressions into the global CacheMemoryContext, making it
effectively impossible to clean up when the owning relcache entry is
destroyed --- the relevant code in RelationDestroyRelation() only managed
to free the topmost List header :-(. This resulted in a session-lifespan
memory leak whenever a table partition's relcache entry is rebuilt.
Fortunately, that's not normally a large data structure, and rebuilds
shouldn't occur all that often in production situations; but this is
still a bug worth fixing back to v10 where the code was introduced.
To fix, put the cached expression tree into its own small memory context,
as we do with other complicated substructures of relcache entries.
Also, deal more honestly with the case that a partition has an empty
partcheck list; while that probably isn't a case that's very interesting
for production use, it's legal.
In passing, clarify comments about how partitioning-related relcache
data structures are managed, and add some Asserts that we're not leaking
old copies when we overwrite these data fields.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/7961.1552498252@sss.pgh.pa.us
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer stop if shmat() of an old segment fails with EACCES. A
postmaster will no longer recycle segments pertaining to other data
directories. That's good for production, but it's bad for integration
tests that crash a postmaster and immediately delete its data directory.
Such a test now leaks a segment indefinitely. No "make check-world"
test does that. win32_shmem.c already avoided all these problems. In
9.6 and later, enhance PostgresNode to facilitate testing. Back-patch
to 9.4 (all supported versions).
Reviewed (in earlier versions) by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20190408064141.GA2016666@rfd.leadboat.com
transaction.
The transaction that is initiated by the parallel worker to cooperate
with the actual transaction started by the main backend to complete the
query execution should not be counted as a separate transaction. The
other internal transactions started and committed by the parallel worker
are still counted as separate transactions as we that is what we do in
other places like autovacuum.
This will partially fix the bloat in transaction stats due to additional
transactions performed by parallel workers. For a complete fix, we need to
decide how we want to show all the transactions that are started internally
for various operations and that is a matter of separate patch.
Reported-by: Haribabu Kommi
Author: Haribabu Kommi
Reviewed-by: Amit Kapila, Jamison Kirk and Rahila Syed
Backpatch-through: 9.6
Discussion: https://postgr.es/m/CAJrrPGc9=jKXuScvNyQ+VNhO0FZk7LLAShAJRyZjnedd2D61EQ@mail.gmail.com
We've long had reports of intermittent "could not reattach to shared
memory" errors on Windows. Buildfarm member dory fails that way when
PGSharedMemoryReAttach() execution overlaps with creation of a thread
for the process's "default thread pool". Fix that by providing a second
region to receive asynchronous allocations that would otherwise intrude
into UsedShmemSegAddr. In pgwin32_ReserveSharedMemoryRegion(), stop
trying to free reservations landing at incorrect addresses; the caller's
next step has been to terminate the affected process. Back-patch to 9.4
(all supported versions).
Reviewed by Tom Lane. He also did much of the prerequisite research;
see commit bcbf2346d69f6006f126044864dd9383d50d87b4.
Discussion: https://postgr.es/m/20190402135442.GA1173872@rfd.leadboat.com
join_is_legal() needs to reject forming certain outer joins in cases
where that would lead the planner down a blind alley. However, it
mistakenly supposed that the way to handle full joins was to treat them
as applying the same constraints as for left joins, only to both sides.
That doesn't work, as shown in bug #15741 from Anthony Skorski: given
a lateral reference out of a join that's fully enclosed by a full join,
the code would fail to believe that any join ordering is legal, resulting
in errors like "failed to build any N-way joins".
However, we don't really need to consider full joins at all for this
purpose, because we effectively force them to be evaluated in syntactic
order, and that order is always legal for lateral references. Hence,
get rid of this broken logic for full joins and just ignore them instead.
This seems to have been an oversight in commit 7e19db0c0.
Back-patch to all supported branches, as that was.
Discussion: https://postgr.es/m/15741-276f1f464b3f40eb@postgresql.org
When trying to insert a tuple into a partitioned table, the routing to
the correct partition has been messed up by mixing when a tuple needs to
be stored in an intermediate parent's slot and when a tuple needs to be
converted because of attribute changes between the immediate parent
relation and the parent relation one level above that (the grandparent).
This could trigger errors like the following:
ERROR: cannot extract attribute from empty tuple slot SQL state: XX000
This was not detected because regression tests with dropped attributes
only included tests with two levels of partitioning, and this can be
triggered with three levels or more.
This fixes bug #15733, which has been introduced by 34295b8. The bug
happens only on REL_11_STABLE and HEAD gains the regression tests added
for this bug.
Reported-by: Petr Fedorov
Author: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/15733-7692379e310b80ec@postgresql.org
pg_get_indexdef_worker carelessly fetched indoption entries even for
non-key index columns that don't have one. 99.999% of the time this
would be harmless, since the code wouldn't examine the value ... but
some fine day this will be a fetch off the end of memory, resulting
in SIGSEGV.
Detected through valgrind testing. Odd that the buildfarm's valgrind
critters haven't noticed.
Before those commits, partitioning-related code in the executor could
assume that ModifyTableState.resultRelInfo[] contains only leaf partitions.
However, now a fully-pruned update results in a dummy ModifyTable that
references the root partitioned table, and that breaks some stuff.
In v11, this led to an assertion or core dump in the tuple routing code.
Fix by disabling tuple routing, since we don't need that anyway.
(I chose to do that in HEAD as well for safety, even though the problem
doesn't manifest in HEAD as it stands.)
In v10, this confused ExecInitModifyTable's decision about whether it
needed to close the root table. But we can get rid of that altogether
by being smarter about where to find the root table.
Note that since the referenced commits haven't shipped yet, this
isn't fixing any bug the field has seen.
Amit Langote, per a report from me
Discussion: https://postgr.es/m/20710.1554582479@sss.pgh.pa.us
The foreign-key-checking loop in ATRewriteTables failed to ignore
relations without storage (e.g., partitioned tables), unlike the
initial loop. This accidentally worked as long as RI_Initial_Check
succeeded, which it does in most practical cases (including all the
ones exercised in the existing regression tests :-(). However, if
that failed, as for instance when there are permissions issues,
then we entered the slow fire-the-trigger-on-each-tuple path.
And that would try to read from the referencing relation, and fail
if it lacks storage.
A second problem, recently introduced in HEAD, was that this loop
had been broken by sloppy refactoring for the tableam API changes.
Repair both issues, and add a regression test case so we have some
coverage on this code path. Back-patch as needed to v11.
(It looks like this code could do with additional bulletproofing,
but let's get a working test case in place first.)
Hadi Moshayedi, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/CAK=1=WrnNmBbe5D9sm3t0a6dnAq3cdbF1vXY816j1wsMqzC8bw@mail.gmail.com
Discussion: https://postgr.es/m/19030.1554574075@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190325180405.jytoehuzkeozggxx%40alap3.anarazel.de
The limitations that it is not allowed to create/attach a foreign table
as a partition of an indexed partitioned table were not documented.
Reported-By: Stepan Yankevych
Author: Etsuro Fujita
Reviewed-By: Amit Langote
Backpatch-through: 11 where partitioned index was introduced
Discussion: https://postgr.es/m/1553869152.858391073.5f8m3n0x@frv53.fwdcdn.com
This reverts commits 2f932f71d9f2963bbd201129d7b971c8f5f077fd,
16ee6eaf80a40007a138b60bb5661660058d0422 and
6f0e190056fe441f7cf788ff19b62b13c94f68f3. The buildfarm has revealed
several bugs. Back-patch like the original commits.
Discussion: https://postgr.es/m/20190404145319.GA1720877@rfd.leadboat.com
Since 11, it is possible to use a non-superuser role when using an
online source cluster with pg_rewind as long as the role has proper
permissions to execute on the source all the functions used by
pg_rewind, and the documentation stated that a superuser is necessary.
Let's add at the same time all the details needed to create such a
role.
A second confusion which comes a lot from users is that it is necessary
to issue a checkpoint on a freshly-promoted standby so as its control
file has up-to-date timeline information which is used by pg_rewind to
validate the operation. Let's document that properly. This is
back-patched down to 9.5 where pg_rewind has been introduced.
Author: Michael Paquier
Reviewed-by: Magnus Hagander
Discussion: https://postgr.es/m/CABUevEz5bpvbwVsYCaSMV80CBZ5-82nkMzbb+Bu=h1m=rLdn=g@mail.gmail.com
Backpatch-through: 9.5
Buildfarm members idiacanthus and komodoensis, which share a host, both
executed this test in the same second. That failed. Back-patch to 9.6,
where the test first appeared.
Discussion: https://postgr.es/m/20190404020543.GA1319573@rfd.leadboat.com
When $(MODULES) and $(MODULE_big) are empty, derive the database name
from the first element of $(REGRESS) instead of using a constant string.
When deriving the database name from $(MODULES), use its first element
instead of the entire list; the earlier approach would fail if any
multi-module directory had $(REGRESS) tests. Treat isolation suites and
src/pl correspondingly. Under USE_MODULE_DB=1, installcheck-world and
check-world no longer reuse any database name in a given postmaster.
Buildfarm members axolotl, mandrill and frogfish saw spurious "is being
accessed by other users" failures that would not have happened without
database name reuse. (The CountOtherDBBackends() 5s deadline expired
during DROP DATABASE; a backend for an earlier test suite had used the
same database name and had not yet exited.) Back-patch to 9.4 (all
supported versions), except bits pertaining to isolation suites.
Concept reviewed by Andrew Dunstan, Andres Freund and Tom Lane.
Discussion: https://postgr.es/m/20190401135213.GE891537@rfd.leadboat.com
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20130911033341.GD225735@tornado.leadboat.com
When accessing a table with RLS via a view, the RLS checks are
performed as the view owner. However, the code neglected to propagate
that to any subqueries in the RLS checks. Fix that by calling
setRuleCheckAsUser() for all RLS policy quals and withCheckOption
checks for RTEs with RLS.
Back-patch to 9.5 where RLS was added.
Per bug #15708 from daurnimator.
Discussion: https://postgr.es/m/15708-d65cab2ce9b1717a@postgresql.org
One should almost always terminate an old process, not use a manual
removal tool like ipcrm. Removal of the ipcclean script eleven years
ago (39627b1ae680cba44f6e56ca5facec4fdbfe9495) and its non-replacement
corroborate that manual shm removal is now a niche goal. Back-patch to
9.4 (all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20180812064815.GB2301738@rfd.leadboat.com
