7c3e7d536c
Allow cursor keys to be used in CPU mode and error mode config menus.
2022-01-30 15:47:17 +00:00
e13b8bbb83
Increase config pop-up window width.
...
Also add more constant definitions to better parameterise the layout.
2022-01-30 15:37:13 +00:00
f348add314
Remap numeric keypad to cursor keys.
2022-01-30 15:18:25 +00:00
4589c7dad4
Recognise cursor keys and map them to 'l', 'r', 'u', 'd'.
2022-01-30 15:12:42 +00:00
151870cc0b
Display enabled CPUs as a scrollable list in the config menu.
...
This removes a constraint on the number of CPU cores we can support.
2022-01-30 15:12:04 +00:00
ab278566e4
Bypass start barriers during dummy runs.
...
This should speed up the dummy runs on distributed SMP systems.
2022-01-29 17:11:46 +00:00
c5e9fa4e18
Increase maximum number of APs to 256.
2022-01-29 16:13:05 +00:00
ed02a3baef
Support display of more than 32 CPU cores in the config menu.
2022-01-29 16:00:33 +00:00
fe4374e818
Allocate the main program stacks after the loaded program.
...
After we relocate the program, we restart it. So there is no need to copy
over the old stack contents. This allows us to increase the maximum number
of APs without a run time overhead. The maximum number of APs will still
be limited by the size of low memory.
2022-01-29 15:17:00 +00:00
73bfc1878a
Blank the full field when displaying the active CPU core.
2022-01-29 15:06:21 +00:00
f04cb1adb6
Make spinner rotate at a constant speed.
2022-01-29 15:06:21 +00:00
3c69cd07b7
Guard against missing TSC and divide by zero in elapsed time calculations.
2022-01-29 15:06:21 +00:00
09890bf0cd
Support more than 32 CPU cores in main display.
...
Either one core is active or all enabled cores are active, so we don't
really need a separate spinner for each core.
2022-01-29 15:06:05 +00:00
4791206bbd
Use consistent CPU sequencing mode abbreviations in config menu.
2022-01-28 21:57:39 +00:00
01365ab2e7
A few more code tweaks and comment typo fixes in the EHCI driver.
2022-01-28 19:55:31 +00:00
8509e3320a
Minor code tweaks - no functional change.
2022-01-23 17:55:57 +00:00
563c8a1ee7
Add support for EHCI USB controller.
2022-01-23 17:38:50 +00:00
5b56d76e03
Minor fixes and refactoring in preparation for EHCI support.
2022-01-23 17:34:08 +00:00
79ec174a82
Update known limitations in README, now USB hubs are supported.
2022-01-09 21:45:07 +00:00
0fded3e321
Store pmem temporary arrays on the stack to reduce memory footprint.
...
Now we have more stack space available for the BSP during initialisation,
we no longer need to store the temporary data off stack.
2022-01-09 21:27:44 +00:00
0aa1b1fa97
Rearrange stack space to reduce memory footprint.
...
The BSP only needs extra stack space during program initialisation. The APs
aren't running at that point, so by positioning the BSP stack above the AP
stacks, it can extend down into the AP stack space without causing any
problems.
2022-01-09 21:25:16 +00:00
a454174f3f
Fis startup stack address calculations.
2022-01-09 19:26:56 +00:00
4400ec6f17
Rename usbkbd to usbhcd to better reflect the new design.
2022-01-08 23:14:50 +00:00
52a87c5d40
Add support for USB hubs.
...
This refactors the USB driver code into a more object-oriented design,
with usbkbd.c being the base class and ohci.c and xhci.c being subclasses.
This makes the code that performs USB device enumeration independent of
the host controller.
2022-01-08 23:00:28 +00:00
84da9f7553
Refactor USB driver code to prepare for supporting USB hubs.
2021-12-29 18:17:46 +00:00
a4c62cae97
XHCI: don't scan USB3 ports - keyboards will only be found on USB2 ports.
2021-12-28 16:14:29 +00:00
e5663fc8f9
Added more detail to the README.
2021-12-24 15:04:02 +00:00
e19dc26e33
Fix markdown in README.
2021-12-24 00:21:12 +00:00
5684d0bb7a
Add boot command line options and keyboard selection to README.
2021-12-24 00:13:19 +00:00
5d4a370692
Add grub-iso directoru to .gitignore.
2021-12-23 19:24:49 +00:00
ea28112e08
Update the version number to show this is a development version.
2021-12-23 19:14:03 +00:00
9785d8f8b9
Map USB controller registers into the reserved area of virtual memory.
...
This ensures they are accessible when the test is running, and if they
are physically mapped above 4GB.
2021-12-23 17:45:26 +00:00
733919966d
Add support for boot command line options.
2021-12-23 14:08:02 +00:00
ad6c7d0455
Use F10 (or '0'), not ESC to exit menus.
...
This avoids accidentally rebooting by pressing the key too many times.
2021-12-23 11:11:42 +00:00
d9fee4dcbb
Flush caches between writing and verifying test data.
...
Mostly we write and read large chunks of data which will make it likely
that the data is no longer in the cache when we come to verify it. But
this is not always true, and in any case, we shouldn't rely on it.
2021-12-23 11:00:10 +00:00
11c0c6c2f5
Use atomic memory read/write functions in tests.
...
This ensures compiler optimisations won't interfere with the tests.
2021-12-23 10:07:55 +00:00
eb58a63ad4
XHCI: add device attach time delay after starting the controller.
2021-12-22 19:08:14 +00:00
8069b8724b
Initial support for native USB keyboard interface.
...
This adds support for USB keyboards connected directly to an OHCI
or XHCI controller.
2021-12-22 17:31:06 +00:00
4aea5f4d19
Minor spacing fix.
2021-12-22 16:37:54 +00:00
00603a2b1e
Workaround for VirtualBox EFI boot bug.
...
(issue #19910 on VirtualBox bug tracker)
2021-12-22 16:29:33 +00:00
f946a9724c
Add support for GRUB test ISO in 32-bit builds.
2021-12-22 16:26:28 +00:00
a7d17186f3
Improved PCI configuration space access functions.
2021-12-05 14:15:37 +00:00
8f1d81b65d
Add missing includes of stdbool.h.
...
To ensure we aren't dependent on the order of inclusion.
2021-12-05 13:50:25 +00:00
21e7c6fb49
Update version to 1.5.
2021-10-16 10:39:03 +01:00
33230c511d
Allow F10 to be used as an alternative to ESC (issue #5 ).
2021-10-16 10:35:58 +01:00
af8e07136c
Add grub-iso target in 64-bit make file for test purposes.
2021-09-04 13:11:42 +01:00
d70d8dd407
Disable debug output in efisetup.c (committed by accident).
2021-09-04 13:10:09 +01:00
2b05b47d9b
Fix makefiles to rebuild ISO files if they are deleted.
2021-09-04 09:24:43 +01:00
abbee1a25f
Use 'size -B' instead of 'size -G' to determine BSS size.
...
The -G option is a relatively recent addition, so fails on older
systems (issue #11 ).
2021-09-02 18:11:30 +01:00
a4afd784ce
Document use of number keys as altermatives to the function keys.
2021-07-25 10:09:49 +01:00
Martin Whitaker