* Use roundup() to calculate the next intval boundary for nexttbtt. This method is more simple to understand and computationally simpler.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3095 0192ed92-7a03-0410-a25b-9323aeb14dbd
from the madwifi-dfs branch (benoit) r3086
Added MAC_FMT & MAC_ADDR macros that can be used as a drop-in
replacement for ether_sprintf(). Fixed some use of ether_sprintf() that
uses the same static buffer twice.
- Without the functional changes.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3091 0192ed92-7a03-0410-a25b-9323aeb14dbd
* packets dropped in ath_hardstart are cleaned up there, so cleaning up in parent_queue_xmit is an error
* packets in ieee80211_pwrsave must always have a reference in the cb, so it is better that is fails noisily otherwise
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3074 0192ed92-7a03-0410-a25b-9323aeb14dbd
does not increment rs_rateattempts for successfully sent packets, and
therefore the rate adaptation does not take place.
Signed-off-by: Brian Candler <B.Candler@pobox.com>
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3070 0192ed92-7a03-0410-a25b-9323aeb14dbd
It's called with NULL vap in several places, and the old
ath_beacon_config() had such protection. Without this check, the kernel
panics after association in managed mode.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3064 0192ed92-7a03-0410-a25b-9323aeb14dbd
arguments are boolean.
Originally the arguments were converted to booleans, but r2345 removed
this conversion. I've added the conversion to booleans back again and
removed the use of XOR as it's confusing and unnecessary.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3062 0192ed92-7a03-0410-a25b-9323aeb14dbd
IRQF_SHARED appeared in Linux 2.6.18. Define it in compat.h for older
kernels. Stop using obsolete SA_SHIRQ in if_ath_ahb.c and if_ath_pci.c
This fixes compilation of if_ath_ahb.c for Linux 2.6.22 and newer.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3041 0192ed92-7a03-0410-a25b-9323aeb14dbd
They are of no use, because they are not updated as the developmnet
continues. It's better to have a single version for MadWifi.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3039 0192ed92-7a03-0410-a25b-9323aeb14dbd
places where we could use vap->iv_bss->ni_bssid instead of ni->ni_bssid but i'm
not sure about the other ones.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3036 0192ed92-7a03-0410-a25b-9323aeb14dbd
branch to trunk. especially notable is, that due to improved nexttbtt (next
"target beacon transmit time") calculation we will now get the correct backoff
behaviour for beacons, resulting in only one beacon per beacon interval (the
current head version will send N beacons for N stations in the beacon interval
because they are poorly synchronized). also because of the better timer
synchronization there is no more time lag of up to 1 minute until we see
beacons after a merge. thanks to benoit for figuring that out!
the difference between this patch and the version in the dfs-branch is that it
still uses self linked descriptors and uses the SWBA interrupt only for
updating the nexttbtt. this is necessary to recognize HW merges, for which we
don't get any notification by the hardware (see the thread "IBSS testing" on
this list for more details).
also i tried to clean up a bit, use a more descriptive function name for timer
updates (ath_beacon_update_timers instead of ath_beacon_config) and generally
better distingush between a HW merge and a SW merge.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3027 0192ed92-7a03-0410-a25b-9323aeb14dbd
i verified that 0 rates also create the same problem in G mode so i removed the reference to A bands.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3015 0192ed92-7a03-0410-a25b-9323aeb14dbd
We were setting this field to 0 as we had no easy way of determining
what TX power was used to transmit a frame. However, by including this
field and setting it to 0dBm we are saying that each frame is being
transmitted at 1mW, which is incorrect. Better to simply not write the
field at all, however this introduces the need for padding in the TX
header to ensure that the TX_FLAGS field is aligned to a 16-bit
boundary.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3014 0192ed92-7a03-0410-a25b-9323aeb14dbd
* Remove comments that merely duplicate the code (i.e., they don't provide information on Why or explain the opaque)
* Rename some variable for consistency
* Line length -> 80 chars
* Reorder non-dependent code blocks in a function to make it more readable (at least to me)
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3003 0192ed92-7a03-0410-a25b-9323aeb14dbd
beacons and management frames.
this includes benoits r2993 (from dfs branch) and the patch i sent to the list
for review a couple of days ago.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@3002 0192ed92-7a03-0410-a25b-9323aeb14dbd
Use t->keyix in the ic_encap argument instead of the hardcoded 0. Print
"FAIL" on failure and "PASS" on success. Take an exact copy of struct
tkip_ctx from ieee80211_crypto_tkip.c
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2990 0192ed92-7a03-0410-a25b-9323aeb14dbd
ARRAY_SIZE is present in all kernel versions we support. Use it instead
of other definitions. Define ARRAY_SIZE in the userspace tools as well.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2988 0192ed92-7a03-0410-a25b-9323aeb14dbd
ieee80211_crypto_newkey() will fail if the crypto module for the cipher
is not loaded. ieee80211_crypto_available() will try to load the module
first.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2987 0192ed92-7a03-0410-a25b-9323aeb14dbd
DIRS_MODULES is always used in the context when the Makefile is
processed directly, not from the kernel build system. Therefore, it's
equivalent to obj-y.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2986 0192ed92-7a03-0410-a25b-9323aeb14dbd
The new crypto API uses VAP, so allocate one. Use keys from
vap->iv_nw_keys with the provided key index (0 for TKIP), don't allocate
another key on the stack. Synchronize context structures with the
current code.
Return -ENXIO on failure. It's hard to find a sensible code for crypto
test failure, but -1 (-EPERM) was misleading. Fix TKIP test that was
ignoring failures.
Update module parameters for Linux 2.6. Provide makefiles to facilitate
compilation. Fix all sparse warnings.
git-svn-id: http://madwifi-project.org/svn/madwifi/trunk@2983 0192ed92-7a03-0410-a25b-9323aeb14dbd
mentor