Fixes#2643
Inner drop region behaves like move to mark.
The outer region is close to the edge (currently 30px from the edge).
This will place the container as a sibling in the given direction within
the parent container. If the move direction goes against the orientation
of the parent container, tree_move() is called.
Contributors:
Co-authored-by: Orestis Floros <orestisflo@gmail.com>
See #3085
- Inner drop region behaves like move to mark
- Handle workspaces
- Fix crash when target closes
- Initiate tiling drag from titlebar
- Hide indicator until container is dragged outside of original position
- Calculate outer_threshold using percentages instead of fixed pixel
values
- Emit 'move' event properly
- Don't focus previously unfocused containers
- Use tree_split() on different orientation
- Fix redundant split containers
- DT_PARENT
- Readability & optimizations
- Limit parent threshold by render_deco_height()
- Tests
- Fullscreen container handling
- Initiate drag from title bar
- Fix issue of EnterNotify events still triggering after drag_callback
is called
- Include decorations for drop target calculation
Co-authored-by: Michael Forster <email@michael-forster.de>
See #2178
- Original implementation of tiling drag + indicator window
> A container can be dragged by the title bar to one of the four sides
> of another container. That container will then be split either
> horizontally or vertically.
Co-authored-by: Tony Crisci <tony@dubstepdish.com>
See #2653
- Original implementation of outer/inner drop region indicator:
> There are two drop regions per direction.
>
> The inner region is closer to the center of the window. Dropping on
> this region will split the target container and put the container
> within the split at the given direction beside the target container.
>
> The outer region is close to the edge (currently 30px from the edge).
> This will place the container as a sibling in the given direction within
> the parent container.
>
> Dropping into the outer region moves the con beside the target. If the
> move direction goes against the orientation of the parent container, the
> con moves out of the row.
- Fix crash: Ignore containers without a managed window (eg i3bar)
Remove end token from BINDCOMMAND
fixesi3/i3#5000: bindsym command cannot be empty, because NULL string
causes i3 to segfault when copied in configure_binding()
This way, if the user has provided a valid, existing output in the list
of outputs, the focus & move workspace to output commands will not
report a misleading failure.
Side-effect is that the command code will try to execute a no-op e.g. by
moving the workspace to the output it already is on. But that's what the
user is actually requesting in this case and it shouldn't be a problem.
Fixes#4691
Other approaches would be:
- Slow/fast pointer technique.
- Using a set/associative map to save 'seen' nodes. i3 does not have
such data structure.
Counting the total amount of windows is the simpler to implement.
I've also extracted the logic in a function and re-used it in render.c.
Fixes#4404
We do this by adding to included_files as i3 processes the configs.
This should allow for easy debugging, without having to change how i3 processes
config files.
related to #4192
Commands with more than 10 words would result in i3 crashing. The root
cause is that the stack which holds arguments with identifiers is
only 10 big, but generate-command-parser.pl was giving every word an
identifier of "".
This criterion matches all open windows, as a more readable (and
correct) version of the 'class=".*"' criterion (more correct because
it'll also match windows which don't have WM_CLASS set yet).
This feature defaults to off, and can be turned on for individual windows,
or (with for_window) for all new windows. See the userguide change.
This commit is partially based on work by:
• Marius Muja
• mickael9
• Esteve Varela Colominas
• Bernardo Menicagli
The implementation uses wordexp(3) just like sway:
https://github.com/i3/i3/issues/1197#issuecomment-226844106
Thanks to jajm for their implementation at
bb55709d0a
This required refactoring the config parser to be re-entrant
(no more global state) and to return an error instead of dying.
In case a file cannot be opened, i3 reports an error but proceeds with the
remaining configuration.
Key bindings can be overwritten or removed using the new --remove flag of the
bindsym/bindcode directive.
All files that were successfully included are displayed in i3 --moreversion.
One caveat is i3 config file variable expansion, see the note in the userguide.
fixes#4192
The bug here is that workspace assignments with numbers are triggered
even if a named argument matches later on.
With this commit, get_assigned_output is called to correctly iterate the
workspace assignments.
Fixes#4021
Motivation:
• faster builds (on an Intel Core i9-9900K):
( ../configure --disable-sanitizers && make -j8; )
19,47s user 2,78s system 395% cpu 5,632 total
( meson .. -Dmans=true -Ddocs=true -Dprefix=/usr && ninja; )
38,67s user 3,73s system 1095% cpu 3,871 total
• more approachable build system configuration in the
python-esque meson domain specific language instead of
the autotools m4 macro language
• built-in language server support thanks to ninja:
the required compile_commands.json is built automatically
and only needs to be linked from the source dir, e.g.:
ln -s build/compile_commands.json .
Changes:
• the embedded vcs version info format changed from e.g.
4.18-282-gabe46f69 (2020-05-16, branch "next")
to:
4.18-282-gabe46f69
I think it’s better to lose a little bit of detail for
the gained cleanliness of using meson’s vcs_tag()
• Drop unused xcb-event dependency.
• We can no longer enable sanitizers and debug options
based on whether we are in a release or non-release build,
because our new version logic runs at ninja build time,
not at meson configure time.
The new behavior is probably for the better in terms of
what people expect, and we can make the CI use address sanitizer
explicitly to ensure it is still exercised.
• We lose the AX_EXTEND_SRCDIR behavior, i.e. including the
path component of the parent of the source dir in all paths.
This was a trick we used for easier debugging, so that stack
traces would contain e.g. ../i3-4.18.1/src/main.c, instead of
just src/main.c.
The other mechanism (_i3_version symbol) that we have for including
the version number in the “backtrace full” (but not merely
“backtrace”) output of gdb still works.
• Release tarballs now use tar.xz. Why not.
Migration plan
This commit adds the meson build files to the tree, but does not remove
autotools yet. For the development phase, we will keep both build systems
functional (and built on travis).
Then, just before the i3 v4.19 release, we will remove autotools from the tree
and the release tarball will require meson to compile.
This way, we incentivize maintainers to change, while also offering them an easy
way out (if desired) by reverting the most recent commit. In practice, switching
a distribution package from autotools to meson should only be a few line change,
easier than applying the provided patch :). Take a look at the debian/ changes
in this commit for an example.
meson is broadly available everywhere that i3 is available: Both xorg-server and
systemd gained meson build files in 2017, so we can follow suit:
https://anholt.livejournal.com/52574.htmlhttps://in.waw.pl/~zbyszek/blog/systemd-meson.html
How do I?
For producing a coverage report, enable the b_coverage meson base option
and run ninja coverage-html:
% cd build
% meson .. -Db_coverage=true
% ninja
% ninja test
% ninja coverage-html
See also https://mesonbuild.com/howtox.html#producing-a-coverage-report
For using the address sanitizer, memory sanitizer or undefined behavior
sanitizer, use the b_sanitize meson base option:
% cd build
% meson .. -Db_sanitize=address
% ninja
See also https://mesonbuild.com/Builtin-options.html#base-options
related to #4086
Fixes#4039
Crash with docking clients where the floating field is set even though
floating_enable refuses to make them floating.
See issue for example with logs.
The default `tiling` and `floating` behavior is preserved and matches
both cases.
Adds a new handler to `remanage_window` on A_I3_FLOATING_WINDOW change.
Mainly in order to `run_assignments`, this makes `for_window [floating]`
directives to work for windows which where initially opened as tiling.
Now, when floating is enabled, `for_window` will trigger correctly. Same
applies to `for_window [tiling]`.
The obvious solution of `run_assignments` after
`floating_{enable,disable}` doesn't work because `run_assignments`
modifies the parser state in src/assignments.c:51.
Fixes#3588
Co-Authored-By: Michael Stapelberg <michael@stapelberg.de>
Before this commit, large workspace numbers treated oddly:
$ i3-msg 'rename workspace to 1234567890'
# displayed in i3bar as `0`
$ i3-msg 'rename workspace to 4294967200'
$ i3-msg -t get_workspaces | jq '.[]|select(.focused).num'
-96 # int32_t overflow
$ i3-msg 'rename workspace to 99999999999999999999'
$ i3-msg -t get_workspaces | jq '.[]|select(.focused).num'
-1 # treated as unnumbered
This commit puts a consistent limit on workspace numbers. Now
workspaces with numbers beyond INT32_MAX are treated as unnumbered.
I had a dilemma about the behaviour here:
1. Prohibit focus leaving the workspace in any case unless if
get_tree_next's initial argument is a workspace. This is what this
commit does (also i3-cycle).
2. Leave the workspace if no warp is possible (eg workspace with single
container or `focus right` with `V[a b c*]`).
Fixes#2180
- Makes `tree_next` not recursive.
- Adds `focus next|prev [sibling]` command. See (1.) and (2.) in
https://github.com/i3/i3/issues/2587#issuecomment-378505551 (Issue also
requests move command, not implemented here).
- Directional focus command now supports command criteria.
Wrapping is not implemented inside a floating container. This was also
true before the refactor so I am not changing it here.
